summaryrefslogtreecommitdiffstats
path: root/include/configs/yosemite.h
Commit message (Collapse)AuthorAgeFilesLines
* Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated valueWolfgang Denk2010-10-261-2/+1
| | | | | | | | | | | | | | | | | | CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZEWolfgang Denk2010-10-261-2/+2
| | | | | | | | | | | | | | | | | | CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be some end address; to make the meaning more clear we rename it into CONFIG_SYS_INIT_RAM_SIZE No other code changes are performed in this patch, only minor editing of white space (due to the changed length) and the comments was done, where noticed. Note that the code for the PATI and cmi_mpc5xx board configurations looks seriously broken. Last known maintainers on Cc: Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Denis Peter <d.peter@mpl.ch> Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* Makefile: move all Power Architecture boards into boards.cfgWolfgang Denk2010-10-181-0/+2
| | | | | | | | | | Clean up Makefile, and drop a lot of the config.mk files on the way. We now also automatically pick all boards that are listed in boards.cfg (and with all configurations), so we can drop the redundant entries from MAKEALL to avoid building these twice. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Use common NS16550 driver for PPC4xx UARTStefan Roese2010-09-231-3/+1
| | | | | | | | | | | | | | | | This patch removes the PPC4xx UART driver. Instead the common NS16550 driver is used, since all PPC4xx SoC's use this peripheral device. The file 4xx_uart.c now only implements the UART clock calculation function which also sets the SoC internal UART divisors. All PPC4xx board config headers are changed to use this common NS16550 driver now. Tested on these boards: acadia, canyonlands, katmai, kilauea, sequoia, zeus Signed-off-by: Stefan Roese <sr@denx.de>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-181-56/+56
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE referencesPeter Tyser2008-10-141-1/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* rename CFG_ENV macros to CONFIG_ENVJean-Christophe PLAGNIOL-VILLARD2008-09-101-7/+7
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASHJean-Christophe PLAGNIOL-VILLARD2008-09-101-3/+3
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROMJean-Christophe PLAGNIOL-VILLARD2008-09-101-3/+3
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* drivers/mtd: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-131-1/+1
| | | | | | rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* ppc4xx: Unify AMCC's board config files (part 3/3)Stefan Roese2008-06-061-150/+14
| | | | | | | | | | | | | | | This patch series unifies the AMCC eval board ports by introducing a common include header for all AMCC eval boards: include/configs/amcc-common.h This header now includes all common configuration options/defines which are removed from the board specific headers. The reason for this is ease of maintenance and unified look and feel of all AMCC boards. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boardsStefan Roese2008-05-081-9/+4
| | | | | | | | | This patch adds fdt (flattened device tree) support to all remaining AMCC eval boards. Most newer boards already support device tree. With this patch, all AMCC boards now enable device tree passing from U-Boot to Linux arch/powerpc kernels. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add device tree support to AMCC YosemiteIra Snyder2008-05-081-0/+9
| | | | | | | | | Add support for booting with a device tree blob. This is needed to boot ARCH=powerpc kernels. Also add support for setting the eth0 mac address via the ethaddr variable. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Stefan Roese <sr@denx.de>
* Replace "run load; run update" with conditionalized "run load update".Detlev Zundel2008-03-061-1/+1
| | | | | | | The latter version stops when "run load" fails for whatever reasons rendering the combination *a lot* more secure. Signed-off-by: Detlev Zundel <dzu@denx.de>
* Fix quoting problem (preboot setting) in many board config files.Wolfgang Denk2008-03-031-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Fix problem with init-ram bigger than 4k on 440 platformsStefan Roese2008-02-041-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 supportStefan Roese2007-12-041-0/+9
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Remove cache definition from 4xx board config filesStefan Roese2007-10-311-9/+0
| | | | | | | All 4xx board config files don't need the cache definitions anymore. These are now defined in common headers. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-151-0/+2
| | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-071-28/+41
|\
| * include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.Jon Loeliger2007-07-101-0/+9
| | | | | | | | | | | | | | | | | | Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined. Remove lingering references to CFG_CMD_* symbols. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config ↵Jon Loeliger2007-07-051-26/+30
| | | | | | | | | | | | files. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-251-1/+1
| |\
| | * Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-221-1/+1
| | |
| * | ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese2007-06-251-1/+0
| |/ | | | | | | | | | | | | | | This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Clean up 440 exceptions handlingGrzegorz Bernacki2007-06-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | USB: ohci fixes and cleanup for ppc4xx and yosemite board.Markus Klotzbuecher2007-06-061-0/+1
| |
* | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-04-231-1/+0
|\ \ | |/
| * Merge some AMCC make targets to keep the top-level Makefile smallerStefan Roese2007-03-281-1/+0
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with git://www.denx.de/git/u-boot.git#testing-USBMarkus Klotzbuecher2007-03-231-1/+7
|\ \ | |/ |/|
| * Merge with /home/mk/git/u-boot-generic_ohci#generic_ohciWolfgang Denk2006-11-271-1/+7
| |\
| | * Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be ableMarkus Klotzbuecher2006-11-271-1/+1
| | | | | | | | | | | | to choose between the old and the generic OHCI drivers.
| | * Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driverMarkus Klotzbuecher2006-11-271-0/+6
| | | | | | | | | | | | | | | | | | and adapted board configs TQM5200 and yosemite accordingly. This commit also makes the maximum number of root hub ports configurable (CFG_USB_OHCI_MAX_ROOT_PORTS).
* | | [PATCH] Merge Yosemite & Yellowstone board portsStefan Roese2007-01-301-17/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) share one config file and all board specific files. This way we don't have to maintain two different sets of files for nearly identical boards. Signed-off-by: Stefan Roese <sr@denx.de>
* | | [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speedStefan Roese2007-01-131-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the board revision and the current PCI bus speed are printed after the board message. Also the EBC initialising is now done via defines in the board config file. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Add CONFIG_BOARD_RESET to configure board specific reset functionStefan Roese2006-10-071-0/+1
|/ / | | | | | | Patch by Stefan Roese, 07 Oct 2006
* | Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese2006-09-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | - Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
* | Add commandline history support to all AMCC eval boardsStefan Roese2006-08-071-0/+7
|/ | | | Patch by Stefan Roese, 07 Aug 2006
* Changed default ramdisk addr in yosemite/yellowstone portsStefan Roese2006-05-151-2/+2
| | | | Patch by Stefan Roese, 15 May 2006
* Update yosemite configuration to enable flash write buffer supportStefan Roese2006-05-101-0/+2
| | | | Patch by Stefan Roese, 10 May 2006
* Change all '$(...)' variable references into '${...}'Wolfgang Denk2005-11-201-8/+8
| | | | | | which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
* Add NetConsole Support for AMCC eval boardsStefan Roese2005-10-201-1/+3
| | | | Patch by Stefan Roese, 20 Oct 2005
* Add fat & ext2 support to AMCC 440EP boards Yosemite & BambooStefan Roese2005-10-141-0/+4
| | | | Patch by Stefan Roese, 14 Oct 2005
* Cleanup (PPC4xx is AMCC now)Wolfgang Denk2005-09-231-1/+1
|
* Update AMCC Yosemite to get a consistent setup for all AMCC evalStefan Roese2005-08-111-135/+137
| | | | | boards (baudrate, environment...). Flash driver fixed. Patch by Stefan Roese, 11 Aug 2005
* Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)Stefan Roese2005-08-081-4/+4
| | | | Patch by Stefan Roese, 08 Aug 2005
* Coding style cleanupWolfgang Denk2005-08-021-34/+34
|
* Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.Stefan Roese2005-08-011-0/+312
Patch by Steven Blakeslee, 27 Jul 2005
OpenPOWER on IntegriCloud