summaryrefslogtreecommitdiffstats
path: root/include/configs/microblaze-generic.h
Commit message (Collapse)AuthorAgeFilesLines
* configs: Re-sync with cmd/KconfigTom Rini2016-04-251-5/+0
| | | | | | | Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Re-sync almost all of cmd/KconfigTom Rini2016-04-251-1/+0
| | | | | | | | This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
* microblaze: Remove !OF_CONTROL code for timer and interruptMichal Simek2016-04-041-12/+0
| | | | | | OF_CONTROL is enabled by default that's why this is dead code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Kconfig: Move CONFIG_FIT and related options to KconfigSimon Glass2016-03-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
* Move CONFIG_OF_LIBFDT to KconfigSimon Glass2016-03-141-1/+1
| | | | | | Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* microblaze: Fix board_init calling sequenceMichal Simek2016-01-271-0/+1
| | | | | | | board_init() is in final elf file but it is not called at all. Use board_init_late() instead and call gpio_init() from it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable HUSH via KconfigMichal Simek2016-01-271-3/+0
| | | | | | Cleanup board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Read information about RAM from DTMichal Simek2016-01-271-8/+1
| | | | | | Do not setup ram start/size in board file. Read it from DT instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Move CONFIG_NETCONSOLE to KconfigMichal Simek2016-01-271-1/+0
| | | | | | Cleanup board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove CONFIG_FIT from board fileMichal Simek2016-01-271-1/+0
| | | | | | And enable it via defconfig by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove systemace from board fileMichal Simek2016-01-271-15/+0
| | | | | | | Systemace is ancient IP which is not tested. Remove it from default configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Move eth configuration to KconfigMichal Simek2016-01-271-14/+0
| | | | | | Cleanup board specific file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable axi emac via KconfigMichal Simek2016-01-271-5/+1
| | | | | | Enable driver by default for all platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: emaclite: Move emaclite to KconfigMichal Simek2016-01-271-2/+1
| | | | | | | Add PHYLIB and MII dependencies and enable it by default for Microblaze. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* microblaze: Enable MICREL_KSZ9021Michal Simek2016-01-271-0/+1
| | | | | | | To solve enabling ETH_DM where ksz90x1_reg_field is defined only when additional Micrel type is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable PHYLIB via KconfigMichal Simek2016-01-271-2/+0
| | | | | | Cleanup board configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable uart16550 DM by defaultMichal Simek2016-01-271-13/+0
| | | | | | Microblaze is uses uartlite or uart16550 as console drivers. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* serial: uartlite: Add uartlite to KconfigMichal Simek2016-01-271-6/+1
| | | | | | | | - Move config option out of board file. - Remove uartlite address from config file Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
* microblaze: Move baudrate setting out driver selectionMichal Simek2016-01-271-7/+5
| | | | | | Preparation of moving to DM. Uartlite ignores baudrate setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove CONSOLE_ARGMichal Simek2016-01-271-2/+0
| | | | | | Take it from DT instead. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Do not handle watchdog and gpio in SPLMichal Simek2015-12-181-2/+4
| | | | | | watchdog and gpio are not validated for SPL that's why do not use them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove support for LL_TEMACMichal Simek2015-12-181-5/+1
| | | | | | | LL_TEMAC is available at big endian MB and it is not properly tested that's why the patch removes it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Use malloc setting via KconfigMichal Simek2015-12-181-6/+0
| | | | | | | Clean board specific file. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* microblaze: Make room for malloc before ELFMichal Simek2015-12-181-1/+2
| | | | | | | | Create space below u-boot binary for early malloc. It means memory layout is stack grows down, space for early malloc, u-boot code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* sf: Move SPI flash drivers to defconfigBin Meng2015-11-251-1/+0
| | | | | | | | There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* spi: Move SPI drivers to defconfigBin Meng2015-11-251-1/+0
| | | | | | | | There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* ns16550: move CONFIG_SYS_NS16550 to KconfigThomas Chou2015-11-211-1/+0
| | | | | | Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* common: add CMD_GPIO to KconfigThomas Chou2015-11-181-1/+0
| | | | | | | Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* of: clean up OF_CONTROL ifdef conditionalsMasahiro Yamada2015-08-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have flipped CONFIG_SPL_DISABLE_OF_CONTROL. We have cleansing devices, $(SPL_) and CONFIG_IS_ENABLED(), so we are ready to clear away the ugly logic in include/fdtdec.h: #ifdef CONFIG_OF_CONTROL # if defined(CONFIG_SPL_BUILD) && !defined(SPL_OF_CONTROL) # define OF_CONTROL 0 # else # define OF_CONTROL 1 # endif #else # define OF_CONTROL 0 #endif Now CONFIG_IS_ENABLED(OF_CONTROL) is the substitute. It refers to CONFIG_OF_CONTROL for U-boot proper and CONFIG_SPL_OF_CONTROL for SPL. Also, we no longer have to cancel CONFIG_OF_CONTROL in include/config_uncmd_spl.h and scripts/Makefile.spl. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* kconfig: add config option for shell promptNikita Kiryanov2015-08-131-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
* Move defaults from config_cmd_default.h to KconfigJoe Hershberger2015-06-251-13/+1
| | | | | | | | | | This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-251-1/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* net: Move the CMD_NET config to defconfigsJoe Hershberger2015-06-011-1/+0
| | | | | | | | | | | This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* net: Remove all references to CONFIG_ETHADDR and friendsJoe Hershberger2015-05-191-1/+0
| | | | | | | | | | We really don't want boards defining fixed MAC addresses in their config so we just remove the option to set it in a fixed way. If you must have a MAC address that was not provisioned, then use the random MAC address functionality. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* microblaze: spl: Do not call mem_malloc_init and use early allocMichal Simek2015-02-091-21/+11
| | | | | | | | | | | | This patch has some parts connected together: - Use _gd in bss section which is automatically cleared Location at SPL_MALLOC_END wasn't cleared at all - Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC (mem_malloc_init is not called at all) - Simplify malloc and stack init. At the end of SPL addr is malloc area and below is stack Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Add support for CONFIG_SYS_MALLOC_F_LENMichal Simek2015-02-091-0/+1
| | | | | | | Create space for dm_init where calloc is called and malloc_base has to be initialized. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Move architecture to use generic board initMichal Simek2015-02-091-55/+9
| | | | | | | Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable SPL_NOR support when FLASH_BASE is setupMichal Simek2015-02-091-2/+4
| | | | | | Simplify SPL NOR init. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfigMasahiro Yamada2014-09-251-3/+0
| | | | | | | | | | | This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com>
* kconfig: move CONFIG_OF_* to KconfigMasahiro Yamada2014-09-251-2/+0
| | | | | | | | | | | | | | | | | | | | | | This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* include: remove CONFIG_SPL/CONFIG_TPL definition in config headersMasahiro Yamada2014-07-301-1/+0
| | | | | | | | | Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig. Remove the redundant definition in config headers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* kconfig: delete redundant CONFIG_${ARCH} definitionMasahiro Yamada2014-07-301-1/+0
| | | | | | | CONFIG_${ARCH} is defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* include: define CONFIG_SPL and CONFIG_TPL as 1Masahiro Yamada2014-07-301-1/+1
| | | | | | | | | | | | | | | | We are about to switch to Kconfig in the next commit. But there are something to get done beforehand. In Kconfig, include/generated/autoconf.h defines boolean CONFIG macros as 1. CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1. Otherwise, when switching to Kconfig, the build log would be sprinkled with warning messages like this: warning: "CONFIG_SPL" redefined [enabled by default] Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* microblaze: Wire up OF support for emacliteStephan Linz2014-05-061-1/+1
| | | | | | | | - expand the condition with CONFIG_OF_CONTROL Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Add SPL supportMichal Simek2014-02-041-0/+60
| | | | | | | Add support for U-BOOT SPL. NOR and RAM mode are supported. There are 3 images in NOR flash. u-boot.img, dtb and kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable buffer write for NOR flashesMichal Simek2014-02-041-1/+2
| | | | | | It speeds up writing a lot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* config: remove platform CONFIG_SYS_HZ definition part 2/2Rob Herring2013-11-041-1/+0
| | | | | | Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* xilinx: move microblaze-generic .dts to standard locationStephen Warren2013-08-021-1/+1
| | | | | | | | | | Aside from microblaze, all other SoCs/boards/vendors store their DT files in board/$vendor/dts/$soc-$board.dts. Move microblaze-generic.dts to this location for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <monstr@monstr.eu>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-241-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* gpio: Add support for microblaze xilinx GPIOMichal Simek2013-05-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Microblaze uses gpio which is connected to the system reset. Currently gpio subsystem wasn't used for it. Add gpio driver and change Microblaze reset logic to be done via gpio subsystem. There are various configurations which Microblaze can have that's why gpio_alloc/gpio_alloc_dual(for dual channel) function has been introduced and gpio can be allocated dynamically. Adding several gpios IP is also possible and supported. For listing gpio configuration please use "gpio status" command This patch also remove one compilation warning: microblaze-generic.c: In function 'do_reset': microblaze-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
OpenPOWER on IntegriCloud