summaryrefslogtreecommitdiffstats
path: root/include/configs/MPC8610HPCD.h
Commit message (Collapse)AuthorAgeFilesLines
...
* remove _IO_BASE and KSEG1ADDR from board configuration filesTimur Tabi2009-07-111-4/+0
| | | | | | | | | | | | | | | | The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet driver, but the code that used that macro was removed over a year ago, so board configuration files no longer need to define it. The _IO_BASE macro is also automatically defined to 0 if it isn't already set, so there's no need to define that macro either in the board configuration files. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Andy Fleming <afleming@freescale.com> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENVMike Frysinger2009-02-181-1/+1
| | | | | | | | The CONFIG_CMD_ENV option controls enablement of the `saveenv` command rather than a generic "env" command, or anything else related to the environment. So, let's make sure the define is named accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* 86xx: Reset updatePeter Tyser2009-02-161-2/+0
| | | | | | | | | | Update the 86xx reset sequence to try executing a board-specific reset function. If the board-specific reset is not implemented or does not succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard reset procedure than the previous method and allows all board peripherals to be reset if needed. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* mpc8610hpcd: Fix PCI mapping conceptsBecky Bruce2009-01-131-11/+13
| | | | | | | | | Rename _BASE to _BUS, as it's actually a PCI bus address, separate virtual and physical addresses into _VIRT and _PHYS, and use each appopriately. This makes the code easier to read and understand, and facilitates mapping changes going forward. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* Removed unused CONFIG_L1_INIT_RAM symbol.Jon Loeliger2008-12-011-1/+0
| | | | | | | Prevent further viral propogation of the unused symbol CONFIG_L1_INIT_RAM by just removing it. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Fix non-64-bit compilation problems.Jon Loeliger2008-12-011-0/+14
| | | | | | | | | | | Introducing 64-bit (36-bit) support for the MPC8641HPCN failed to accomodate the other two 86xx boards. Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH} CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L} with nominal 32-bit values. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Becky Bruce <becky.bruce@freescale.com>
* mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLYBecky Bruce2008-11-101-0/+9
| | | | | | | | | | | We define CONFIG_MONITOR_BASE_EARLY to define the initial location of the bootpage in flash. Use this to create an early mapping definition for the FLASH, and change the early_bats code to use this. This change facilitates the relocation of the flash since the early mappings are no longer tied to the final location of the flash. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* powerpc: change 86xx SMP boot methodBecky Bruce2008-11-041-0/+7
| | | | | | | | | We put the bootpg for the secondary cpus into memory and use BPTR to get to it. This is a step towards converting to the ePAPR boot methodology. Also, the code is written to deal properly with more than 4GB of RAM. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* powerpc 86xx: Handle CCSR relocation earlierBecky Bruce2008-11-031-11/+13
| | | | | | | | | | | | | | | Currently, the CCSR gets relocated while translation is enabled, meaning we need 2 BAT translations to get to both the old location and the new location. Also, the DEFAULT CCSR location has a dependency on the BAT that maps the FLASH region. Moving the relocation removes this unnecessary dependency. This makes it easier and more intutive to modify the board's memory map. Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same BAT for CCSR space. Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: remove the unused definitionDave Liu2008-10-301-9/+0
| | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* 86xx: Convert all fsl_pci_init users to new APIsKumar Gala2008-10-241-5/+0
| | | | | | | | | | | | Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Enable 64-bit PCI resources on all Freescale boardsKumar Gala2008-10-241-0/+1
| | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD2008-10-181-172/+172
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV macros to CONFIG_ENVJean-Christophe PLAGNIOL-VILLARD2008-09-101-5/+5
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASHJean-Christophe PLAGNIOL-VILLARD2008-09-101-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHEREJean-Christophe PLAGNIOL-VILLARD2008-09-101-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* cmd_mac: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-09-101-1/+1
| | | | | | | finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM start in commit ad8f8687b78c3e917b173f038926695383c55555 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* FSL DDR: Convert MPC8610HPCD to new DDR code.Jon Loeliger2008-08-271-23/+20
| | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* drivers/mtd: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-131-1/+1
| | | | | | rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Update Freescale sys_eeprom.c to handle CCID formatsTimur Tabi2008-07-151-4/+4
| | | | | | | | | | | | | Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The NXID format replaces the older CCID format, but it's important to support both since most boards out there still use the CCID format. This change is in preparation for using one file to handle both formats. This will also unify EEPROM support for all Freescale 85xx and 86xx boards. Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR instead of ID_EEPROM_ADDR. Signed-off-by: Timur Tabi <timur@freescale.com>
* Feed the watchdog in u-boot for 8610 board.Jason Jin2008-07-071-1/+2
| | | | | | | | | The watchdog on 8610 board is enabled by setting sw[6] to on. Once enabled, the watchdog can not be disabled by software. So feed the dog in u-boot is necessary for normal operation. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* Merge commit 'wd/master'Jon Loeliger2008-06-061-1/+2
|\
| * PPC: Create and use CONFIG_HIGH_BATSBecky Bruce2008-06-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
| * Big white-space cleanup.Wolfgang Denk2008-05-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | mpc86xx: Removed unused and unconfigured memory test code.Jon Loeliger2008-05-191-2/+0
|/ | | | | | Besides, other common code exists. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docsKumar Gala2008-04-291-1/+1
| | | | | | | All the 85xx and 86xx UM describe the register as timing_cfg_3 not as ext_refrec. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.Jon Loeliger2008-02-201-1/+1
| | | | | | | | Without an actual supported video card hooked up, enabling the CONFIG_VIDEO by default just makes it look broken by routing all console output to the video card. Don't. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Add reginfo commandBecky Bruce2008-01-241-0/+1
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: Convert mpc8610hpcd to new law setup method.Becky Bruce2008-01-241-0/+1
| | | | Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* 86xx: enable command-line editingTimur Tabi2008-01-171-0/+1
| | | | | | Enable command-line editing for all MPC86xx boards. Signed-off-by: Timur Tabi <timur@freescale.com>
* FSL: Convert board/freescale/common/Makefile to use CONFIG_Jon Loeliger2008-01-161-0/+3
| | | | | | | | | | | | | | | | Convert the board/freescale/common/Makefile to use CONFIG_* options to select which files to conditionally compile into the board/freescale/common library rather than conditionally compiling entire files. Now handles:: CONFIG_FSL_PIXIS CONFIG_FSL_DIU_FB CONFIG_PQ_MDS_PIB CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driverRoy Zang2008-01-161-5/+2
| | | | | | | | Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver. Remove unused ethernet CONFIG_ options. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* 86xx: Remove cache config from configs.hJon Loeliger2008-01-091-7/+0
| | | | | | Just use the standard defines in asm/cache.h. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Convert MPC8610HPCD to use libfdt.Jon Loeliger2008-01-091-17/+14
| | | | | | | | | Assumes the presence of the aliases node in the DTS to locate the pci and serial nodes for fixups. Use consistent fdtaddr and fdtfile in environment variables. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610HPCD: Enable the 8610 Display Interface UnitJon Loeliger2007-11-201-1/+1
| | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
* Enable ULi1575 Ethernet support in 8610HPCD configRoy Zang2007-11-131-4/+4
| | | | | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* 8610: Add console frame buffer support to FSL 8610 DIU driver.York Sun2007-11-071-4/+16
| | | | | | | | | | | | | | | | Add cfb console support to FSL 8610 DIU driver. Inspect board version from PIXIS to obtain correct pixel format. Use #define CONFIG_VIDEO in config file to enable fb console. To switch monitor, set monitor variable to 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS followed by "diufb init". Preserve logo bitmap at the top of the fb console. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* 8610: Add 8610 DIU display driverYork Sun2007-11-071-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Jon loeliger <jdl@freescale.com>
* 8610: Make some extra debug environment variables conditional.York Sun2007-11-071-1/+12
| | | | | | One may #define ENV_DEBUG to get them back again. Signed-off-by: York Sun <yorksun@freescale.com>
* 8610: Actually enable pixis_reset CONFIGsJason Jin2007-11-071-0/+2
| | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* Fix the BAT definition of PCI IO on 8610 boardJason Jin2007-11-071-9/+7
| | | | | | | | The address in the BAT register is aligned with the BAT size. The original definition actually did not define BAT for PCIE2 IO. This patch fix this. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* Initial mpc8610hpcd cpu/, README and include/ files.Jon Loeliger2007-10-171-0/+660
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
OpenPOWER on IntegriCloud