summaryrefslogtreecommitdiffstats
path: root/include/asm-generic
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: remove NX823 board supportMasahiro Yamada2014-04-181-3/+0
| | | | | | | | | | | Enough time has passed since this board was moved to Orphan. Remove. - Remove board/nx823/* - Remove include/configs/NX823.h - Clean-up ifdef(CONFIG_NX823) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* powerpc: mpc8260: consolidate CONFIG_MPC8260 and CONFIG_8260Masahiro Yamada2014-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Before this commit, CONFIG_MPC8260 and CONFIG_8260 were used mixed-up. All boards with mpc8260 cpu defined both of them: - CONFIG_MPC8260 was defined in board config headers and include/common.h - CONFIG_8260 was defined arch/powerpc/cpu/mpc8260/config.mk We do not need to have both of them. This commit keeps only CONFIG_MPC8260. This commit does: - Delete CONFIG_8260 and CONFIG_MPC8260 definition in config headers and include/common.h - Rename CONFIG_8260 to CONFIG_MPC8260 in arch/powerpc/cpu/mpc8260/config.mk. - Rename #ifdef CONFIG_8260 to #ifdef CONFIG_MPC8260 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
* dm: Add GPIO support and testsSimon Glass2014-03-041-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | Add driver model support for GPIOs. Since existing GPIO drivers do not use driver model, this feature must be enabled by CONFIG_DM_GPIO. After all GPO drivers are converted over we can perhaps remove this config. Tests are provided for the sandbox implementation, and are a sufficient sanity check for basic operation. The GPIO uclass understands the concept of named banks of GPIOs, with each GPIO device providing a single bank. Within each bank the GPIOs are numbered using an offset from 0 to n-1. For example a bank named 'b' with 20 offsets will provide GPIOs named b0 to b19. Anonymous GPIO banks are also supported, and are just numbered without any prefix. Each time a GPIO driver is added to the uclass, the GPIOs are renumbered accordinging, so there is always a global GPIO numbering order. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* dm: Add base driver model supportSimon Glass2014-03-041-0/+8
| | | | | | | | | | | | | | | | Add driver model functionality for generic board. This includes data structures and base code for registering devices and uclasses (groups of devices with the same purpose, e.g. all I2C ports will be in the same uclass). The feature is enabled with CONFIG_DM. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* arm: remove unneeded symbol offsets and _TEXT_BASEAlbert ARIBAUD2014-02-261-19/+7
| | | | | | | | Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* include: delete unused header filesMasahiro Yamada2014-01-241-28/+0
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Introduce common timer functionsRob Herring2013-11-041-0/+2
| | | | | | | | | | | | | | | Many platforms duplicate pretty much the same timer code yet they all have a 32-bit freerunning counter register. Create a common implementation that minimally requires 2 or 3 defines to add timer support: CONFIG_SYS_TIMER_RATE - Clock rate of the timer counter CONFIG_SYS_TIMER_COUNTER - Address of 32-bit counter CONFIG_SYS_TIMER_COUNTS_DOWN - Define if counter counts down All functions are weak or ifdef'ed so they can still be overriden by any platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* ppc4xx: Remove support for PPC405CR CPUsMatthias Fuchs2013-08-201-1/+0
| | | | | | | This patch removes support for the APM 405CR CPU. This CPU is EOL and no board uses this chip. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-241-0/+3
|\ | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| * i2c: add i2c_core and prepare for new multibus supportHeiko Schocher2013-07-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This Patch introduce the new i2c_core file, which holds the I2C core functions, for the rework of the multibus/ multiadapter support. Also adds changes in i2c.h for the new I2C multibus/multiadapter support. This new support can be activated with the CONFIG_SYS_I2C define. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
* | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-245-80/+5
|/ | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Add trace support to generic boardSimon Glass2013-06-261-0/+3
| | | | | | | | | | | Add hooks for tracing to generic board, including: - allow early tracing to start early as possible in U-Boot - reserve memory for trace buffer - copy early trace buffer to main trace buffer after relocation - setup full tracing support after relocation Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-06-221-3/+0
|\
| * remove all references to .dynsymAlbert ARIBAUD2013-06-211-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discard all .dynsym sections from linker scripts Remove all __dynsym_start definitions from linker scripts Remove all __dynsym_start references from the codebase Note: this touches include/asm-generic/sections.h, which is not ARM-specific, but actual uses of __dynsym_start are only in ARM, so this patch can safely go through the ARM repository. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Tested-by: Lubomir Popov <lpopov@mm-sol.com> Tested-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | generic_board: reduce the redundancy of gd_t struct membersMasahiro Yamada2013-06-071-3/+0
|/ | | | | | | | | | | | | | | | | | | | | | This commit refactors common/board_f.c and common/board_r.c in order to delete the dest_addr and dest_addr_sp from gd_t struct. As mentioned as follows in include/asm-generic/global_data.h, /* TODO: is this the same as relocaddr, or something else? */ unsigned long dest_addr; /* Post-relocation address of U-Boot */ dest_addr is the same as relocaddr. Likewise, dest_addr_sp is the same as start_addr_sp. It seemed dest_addr/dest_addr_sp was used only as a scratch variable to calculate relocaddr/start_addr_sp, respectively. With a little refactoring, we can delete dest_addr and dest_addr_sp. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org>
* Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-151-8/+0
| | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
* sandbox: Switch over to generic boardSimon Glass2013-05-011-1/+1
| | | | | | | | | Add generic board support for sandbox. and remove the old board init code. Select CONFIG_SYS_GENERIC_BOARD for sandbox now that this is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* Use 'unsigned int' for global_data's baudrateSimon Glass2013-03-151-1/+1
| | | | | | | | We decided to used unsigned int here, rather than unsigned long. But for the generic global_data it is still unsigned long. So change it over. Signed-off-by: Simon Glass <sjg@chromium.org>
* Introduce generic pre-relocation board_f.cSimon Glass2013-03-151-0/+2
| | | | | | | | | | | | This file handles common pre-relocation init for boards which use the generic framework. It starts up the console, DRAM, performs relocation and then jumps to post-relocation init. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
* Introduce generic link section.h symbol filesSimon Glass2013-03-151-0/+117
| | | | | | | | | | | | | | | | | | We create a separate header file for link symbols defined by the link scripts. It is helpful to have these all in one place and try to make them common across architectures. Since Linux already has a similar file, we bring this in even though many of the symbols there are not relevant to us. Each architecture has its own asm/sections.h where symbols specifc to that architecture can be added. For now everything except AVR32 just includes the generic header. One change is needed in arch/avr32/lib/board.c to make this conversion work. Reviewed-by: Tom Rini <trini@ti.com> (version 5) Signed-off-by: Simon Glass <sjg@chromium.org>
* Introduce generic u-boot.h fileSimon Glass2013-03-151-0/+162
| | | | | | | | This file holds the board info structure. We need this to be generic for the unified board series, so create a structure which contains the basic fields required by the main architectures. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add generic global_dataSimon Glass2013-02-041-0/+102
| | | | | | | Add a generic global_data structure which all archs will eventually use. Signed-off-by: Simon Glass <sjg@chromium.org>
* gpio: remove duplicate function signatureNikita Kiryanov2012-12-111-13/+4
| | | | | | | gpio_request() appears twice in asm-generic/gpio.h Remove one of the definitions. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* Add gpio_request() to asm-generic headerSimon Glass2012-09-211-0/+9
| | | | | | This function should also be part of the GPIO API, so add it. Signed-off-by: Simon Glass <sjg@chromium.org>
* global_data: unify global flag definesMike Frysinger2012-08-091-0/+28
| | | | | | | All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gpio: Modify common gpio.h to more closely match LinuxJoe Hershberger2012-01-091-9/+32
| | | | | | | | | Change "int gp" to "unsigned gpio" Add request and free entry-points Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Add generic gpio.h in asm-genericSimon Glass2011-10-171-0/+74
| | | | | | | Since we want want to have a standard GPIO interface, this adds a definition for this into include/asm-generic/gpio.h. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Fix support for booting bzImageGraeme Russ2010-05-061-0/+105
| | | | | | | | | | | Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* asm-generic/unaligned.h: dynamic default unaligned accessesMike Frysinger2010-03-141-0/+23
| | | | | | | This is based on the asm-arm/unaligned.h, but made generic so all arches that cannot do unaligned accesses can utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* asm-generic/signal.h: import from linuxRobin Getz2010-01-171-0/+101
| | | | | | | | We need signal.h for Blackfin/KGDB, so import the asm-generic/signal.h for people to leverage. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* asm-generic: Consolidate errno.h to asm-generic/errno.hMichal Simek2009-07-091-0/+155
This patch use blackfin errno.h implementation which correspond Linux kernel one. MIPS implemetation is different that's why I keep it. I removed ppc_error_no.h from Marvell boards which was the same too. I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
OpenPOWER on IntegriCloud