summaryrefslogtreecommitdiffstats
path: root/fs/fat
Commit message (Collapse)AuthorAgeFilesLines
* FAT: Make it possible to read from any file positionBenoît Thébaudeau2012-09-262-28/+88
| | | | | | | | | | | | | | | When storage devices contain files larger than the embedded RAM, it is useful to be able to read these files by chunks, e.g. for a software update to the embedded NAND Flash from an external storage device (USB stick, SD card, etc.). Hence, this patch makes it possible by adding a new FAT API to read files from a given position. This patch also adds this feature to the fatload command. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* FAT: Fix file contents listed as directoryBenoît Thébaudeau2012-09-181-4/+4
| | | | | | | | | | | | | With: fatls mmc 0 /dir/file dir: regular directory file: regular file The previous code read the contents of file as if it were directory entries to list. This patch refuses to list file contents as if it were a folder. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: Simplify get_contentsBenoît Thébaudeau2012-09-021-13/+1
| | | | | | | | One call to get_cluster can be factorized with another, so avoid duplicating code. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: get_cluster: Add buffer bouncingBenoît Thébaudeau2012-09-021-12/+30
| | | | | | | | | | Add a buffer bouncing mechanism to get_cluster. This can be useful for misaligned applicative buffers passed through get_contents. This is required for the following patches in the case of data aligned differently relatively to buffers and clusters. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: Fix redundant sector readBenoît Thébaudeau2012-09-021-26/+33
| | | | | | | | | With the previous code, the remaining prefetched sectors were read again after each sector. With this patch, each sector is read only once, thus making the prefetch useful. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: cosmetic: Remove useless assignmentBenoît Thébaudeau2012-09-021-1/+0
| | | | | | | | fatlength is not used after this assignment, so it is useless and can be removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: get_fatent: Fix FAT boundary checkBenoît Thébaudeau2012-09-021-2/+2
| | | | | | | | startblock must be taken into account in order not to read past the end of the FAT. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* FAT: cosmetic: Remove extra spacesBenoît Thébaudeau2012-09-021-23/+21
| | | | | | | Remove spaces before opening parentheses in function calls. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* Block: Remove MG DISK supportMarek Vasut2012-06-211-2/+0
| | | | | | | | This driver is unused and obsolete. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: unsik Kim <donari75@gmail.com>
* fs/fat: align disk buffers on cache line to enable DMA and cacheEric Nelson2012-04-301-10/+12
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* fs/fat/fat_write.c: Fix GCC 4.6 warningsAnatolij Gustschin2012-03-261-9/+1
| | | | | | | | | | | | | | | | | Fix: fat_write.c: In function 'find_directory_entry': fat_write.c:826:8: warning: variable 'prevcksum' set but not used [-Wunused-but-set-variable] fat_write.c: In function 'do_fat_write': fat_write.c:933:6: warning: variable 'root_cluster' set but not used [-Wunused-but-set-variable] fat_write.c:925:12: warning: variable 'slotptr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Acked-by: Maximilian Schwerin <mvs@tigris.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
* FAT write: Fix compile errorsDonggeun Kim2012-03-241-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes compile errors introduced by commit 9813b750f32c0056f0a35813b9a9ec0f68b664af 'fs/fat: Fix FAT detection to support non-DOS partition tables' fat_write.c: In function 'disk_write': fat_write.c:54: error: 'part_offset' undeclared (first use in this function) fat_write.c:54: error: (Each undeclared identifier is reported only once fat_write.c:54: error: for each function it appears in.) fat_write.c: In function 'do_fat_write': fat_write.c:950: error: 'part_size' undeclared (first use in this function) These errors only appear when this code is enabled by defining CONFIG_FAT_WRITE option. This patch was originally part of http://article.gmane.org/gmane.comp.boot-loaders.u-boot/121847 Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Maximilian Schwerin <mvs@tigris.de> Fixed patch author and added all needed SoB from the original patch and also submitter's SoB. Extended commit log. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* FAT: update the second FAT when writing a fileDonggeun Kim2012-01-051-0/+11
| | | | | | | | | | | | After susccessful write to the FAT partition, fsck program may print warning message due to different FAT, provided that the filesystem supports two FATs. This patch makes the second FAT to be same with the first one when writing a file. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* fs/fat: Improve error handlingKyle Moffett2012-01-051-4/+14
| | | | | | | | | | | | | | | | | | | | The FAT filesystem fails silently in inexplicable ways when given a filesystem with a block-size that does not match the device sector size. In theory this is not an unsupportable combination but requires a major rewrite of a lot of the filesystem. Until that occurs, the filesystem should detect that scenario and display a helpful error message. This scenario in particular occurred on a 512-byte blocksize FAT fs stored in an El-Torito boot volume on a CD-ROM (2048-byte sector size). Additionally, in many circumstances the ->block_read method will not return a negative number to indicate an error but instead return 0 to indicate the number of blocks successfully read (IE: None). The FAT filesystem should defensively check to ensure that it got all of the sectors that it asked for when reading. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
* fs/fat: Fix FAT detection to support non-DOS partition tablesKyle Moffett2012-01-051-63/+52
| | | | | | | | | | | | | | | | | | | The FAT filesystem code currently ends up requiring that the partition table be a DOS MBR, as it checks for the DOS 0x55 0xAA signature on the partition table (which may be Mac, EFI, ISO9660, etc) before actually computing the partition offset. This fixes support for accessing a FAT filesystem in an ISO9660 boot volume (El-Torito format) by reordering the filesystem checks and reading the 0x55 0xAA "DOS boot signature" and FAT/FAT32 magic number from the first sector of the partition instead of from sector 0. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Fix build warning: fat.c: In function 'fat_register_device': fat.c:66:15: warning: variable 'found_partition' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* fat: reset VFAT short alias checksum on first matchSergei Shtylyov2012-01-051-0/+2
| | | | | | | | | | The VFAT short alias checksum read from a long file name is only overwritten when another long file name appears in a directory list. Until then it renders short file names invisible that have the same checksum. Reset the checksum on first match. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Martin Mueller <martin.mueller5@de.bosch.com>
* Merge branch 'next' of ../nextWolfgang Denk2011-12-231-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of ../next: mkenvimage: Add version info switch (-V) mkenvimage: Fix getopt() error handling mkenvimage: Fix some typos phy: add Micrel KS8721BL phy definition net: introduce per device index mvgbe: remove setting of ethaddr within the driver x86: Add support for specifying an initrd with the zboot command x86: Refactor the zboot innards so they can be reused with a vboot image x86: Add infrastructure to extract an e820 table from the coreboot tables x86: Add support for booting Linux using the 32 bit boot protocol x86: Clean up the x86 zimage code in preparation to extend it x86: Import code from coreboot's libpayload to parse the coreboot table x86: Initial commit for running as a coreboot payload CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/hh405/fpgadata.c CHECKPATCH: ./board/esd/pci405/fpgadata.c CHECKPATCH: ./board/esd/tasreg/fpgadata.c CHECKPATCH: ./board/esd/apc405/fpgadata.c CHECKPATCH: ./board/esd/voh405/fpgadata.c CHECKPATCH: ./board/esd/ash405/fpgadata.c CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c CHECKPATCH: ./board/esd/ar405/fpgadata.c CHECKPATCH: ./board/esd/plu405/fpgadata.c CHECKPATCH: ./board/esd/wuh405/fpgadata.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c CHECKPATCH: ./board/esd/canbt/fpgadata.c CHECKPATCH: ./board/esd/du405/fpgadata.c CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c avr32:mmu.c: fix printf() length modifier fat.c: fix printf() length modifier cmd_sf.c: fix printf() length modifier Make printf and vprintf safe from buffer overruns vsprintf: Move function documentation into header file Add safe vsnprintf and snprintf library functions Move vsprintf functions into their own header Conflicts: tools/mkenvimage.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * fat.c: fix printf() length modifierAndreas Bießmann2011-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DIRENTSPERBLOCK utilizes sizeof() which will return a size_t which has no fixed size. Therefor use correct length modifer for printf() statement to prevent compiler warnings. This patch fixes following warning: ---8<--- fat.c: In function 'do_fat_read': fat.c:879: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' --->8--- Signed-off-by: Andreas Bießmann <biessmann@corscience.de> cc: Mike Frysinger <vapier@gentoo.org> cc: Thomas Chou <thomas@wytron.com.tw> cc: rjones@nexus-tech.net cc: kharris@nexus-tech.net Acked-by: Mike Frysinger <vapier@gentoo.org>
* | FAT: fix some issues in FAT write support codeAnatolij Gustschin2011-12-201-5/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing a file to the FAT partition didn't work while a test using a CF card. The test was done on mpc5200 based board (powerpc). There is a number of problems in FAT write code: Compiler warning: fat_write.c: In function 'file_fat_write': fat_write.c:326: warning: 'counter' may be used uninitialized in this function fat_write.c:326: note: 'counter' was declared here 'l_filename' string is not terminated, so a file name with garbage at the end is used as a file name as shown by debug code. Return value of set_contents() is not checked properly so actually a file won't be written at all (as checked using 'fatls' after a write attempt with 'fatwrite' command). do_fat_write() doesn't return the number of written bytes if no error happened. However the return value of this function is used to show the number of written bytes in do_fat_fswrite(). The patch adds some debug code and fixes above mentioned problems and also fixes a typo in error output. NOTE: after a successful write to the FAT partition (under U-Boot) the partition was checked under Linux using fsck. The partition needed fixing FATs: -bash-3.2# fsck -a /dev/sda1 fsck 1.39 (29-May-2006) dosfsck 2.11, 12 Mar 2005, FAT32, LFN FATs differ but appear to be intact. Using first FAT. Performing changes. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Aaron Williams <Aaron.Williams@cavium.com> Acked-by: Donggeun Kim <dg77.kim@samsung.com>
* fs/fat/fat.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-071-16/+19
| | | | | | | | | Fix: fat.c: In function 'fat_register_device': fat.c:74:19: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* fat: correct ATTR_VFAT checkJ. Vijayanand2011-10-271-3/+3
| | | | | | | | | ATTR_VFAT condition requires multiple bits to be set but the present condition checking in do_fat_read() & get_dentfromdir() ends up passing on even a single bit being set. Signed-off-by: J. Vijayanand <vijayanand.jayaraman@in.bosch.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* fs/fat/fat.c: fix warning: 'part_size' defined but not usedWolfgang Denk2011-10-271-2/+0
| | | | | | | | | Commit c30a15e "FAT: Add FAT write feature" introduced a compiler warning. Fix this. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
* FAT: Add FAT write featureDonggeun Kim2011-10-263-0/+1093
| | | | | | | | | | | | | | In some cases, saving data in RAM as a file with FAT format is required. This patch allows the file to be written in FAT formatted partition. The usage is similar with reading a file. First, fat_register_device function is called before file_fat_write function in order to set target partition. Then, file_fat_write function is invoked with desired file name, start ram address for writing data, and file size. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* fat: replace LINEAR_PREFETCH_SIZE with PREFETCH_BLOCKSSergei Shtylyov2011-10-011-5/+4
| | | | | | | | | Currently in do_fat_read() when reading FAT sectors, we have to divide down LINEAR_PREFETCH_SIZE by the sector size, whereas it's defined as 2 sectors worth of bytes. In order to avoid redundant multiplication/division, introduce #define PREFETCH_BLOCKS instead of #define LINEAR_PREFETCH_SIZE. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
* fat: root directory cluster only makes sense for FAT32Sergei Shtylyov2011-10-011-8/+6
| | | | | | | | | The root directory cluster field only exists in a FAT32 boot sector, so the 'root_cluster' variable in do_fat_read() contains garbage in case of FAT12/16. Make it contain 0 instead as this is what is passed to get_vfatname() in that case anyway. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
* fat: cannot compare bytes and sectorsSergei Shtylyov2011-10-011-3/+4
| | | | | | | | | The code multiples the FAT size in sectors by the sector size and then tries to compare that to the number of sectors in the 'getsize' variable. While fixing this, also change the initial value of 'getsize' as the division of FATBUFSIZE by the sector size gets us FATBUFBLOCKS. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
* fat: fix crash with big sector sizeSergei Shtylyov2011-10-011-37/+60
| | | | | | | | Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it tries to read the boot sector into 512-byte buffer situated on stack. Make the FAT code indifferent to the sector size. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
* scaled down version of generic libraries for SPLAneesh V2011-07-261-1/+5
| | | | Signed-off-by: Aneesh V <aneesh@ti.com>
* fat32 root directory handlingErik Hansen2011-04-021-14/+23
| | | | | | | | | | | | | | | Fat directory handling didn't check reaching the end of the root directory. It relied on a stop condition based on a directory entry with a name starting with a '\0' character. This check in itself is wrong ('\0' indicates free entry, not end_of_directory) but outside the scope of this fix. For FAT32, the end of the rootdir is reached when the end of the cluster chain is reached. The code didn't check this condition and started to read an incorrect cluster. This caused a subsequent read request of a sector outside the range of the usb stick in use. On its turn, the usb stick protested with a stall handshake. Both FAT32 and non-FAT32 (FAT16/FAT12) end or rootdir checks have been put in. Signed-off-by: Erik Hansen <erik@makarta.com>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* FAT: buffer overflow with FAT12/16Stefano Babic2010-10-201-1/+1
| | | | | | | | | | | | | Last commit 3831530dcb7b71329c272ccd6181f8038b6a6dd0a was intended "explicitly specify FAT12/16 root directory parsing buffer size, instead of relying on cluster size". Howver, the underlying function requires the size of the buffer in blocks, not in bytes, and instead of passing a double sector size a request for 1024 blocks is sent. This generates a buffer overflow with overwriting of other structure (in the case seen, USB structures were overwritten). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Mikhail Zolotaryov <lebon@lebon.org.ua>
* VFAT: fix processing of scattered long file name entriesMikhail Zolotaryov2010-10-121-12/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The U-Boot code has the following bugs related to the processing of Long File Name (LFN) entries scattered across several clusters/sectors : 1) get_vfatname() function is designed to gather scattered LFN entries by cluster chain processing - that doesn't work for FAT12/16 root directory. In other words, the function expects the following input data: 1.1) FAT32 directory (which is cluster chain based); OR 1.2) FAT12/16 non-root directory (which is also cluster chain based); OR 1.3) FAT12/16 root directory (allocated as contiguous sectors area), but all necessary information MUST be within the input buffer of filesystem cluster size (thus cluster-chain jump is never initiated). In order to accomplish the last condition, root directory parsing code in do_fat_read() uses the following trick: read-out cluster-size block, process only first sector (512 bytes), then shift 512 forward, read-out cluster-size block and so on. This works great unless cluster size is equal to 512 bytes (in a case you have a small partition), or long file name entries are scattered across three sectors, see 4) for details. 2) Despite of the fact that get_vfatname() supports FAT32 root directory browsing, do_fat_read() function doesn't send current cluster number correctly, so root directory look-up doesn't work correctly. 3) get_vfatname() doesn't gather scattered entries correctly also is the case when all LFN entries are located at the end of the source cluster, but real directory entry (which must be returned) is at the only beginning of the next one. No error detected, the resulting directory entry returned contains a semi-random information (wrong size, wrong start cluster number and so on) i.e. the entry is not accessible. 4) LFN (VFAT) allows up to 20 entries (slots) each containing 26 bytes (13 UTF-16 code units) to represent a single long file name i.e. up to 520 bytes. U-Boot allocates 256 bytes buffer instead, i.e. 10 or more LFN slots record may cause buffer overflow / memory corruption. Also, it's worth to mention that 20+1 slots occupy 672 bytes space which may take more than one cluster of 512 bytes (medium-size FAT32 or small FAT16 partition) - get_vfatname() function doesn't support such case as well. The patch attached fixes these problems in the following way: - keep using 256 bytes buffer for a long file name, but safely prevent a possible buffer overflow (skip LFN processing, if it contains 10 or more slots). - explicitly specify FAT12/16 root directory parsing buffer size, instead of relying on cluster size. The value used is a double sector size (to store current sector and the next one). This fixes the first problem and increases performance on big FAT12/16 partitions; - send current cluster number (FAT32) to get_vfatname() during root directory processing; - use LFN counter to seek the real directory entry in get_vfatname() - fixes the third problem; - skip deleted entries in the root directory (to prevent bogus buffer overflow detection and LFN counter steps). Note: it's not advised to split up the patch, because a separate part may operate incorrectly. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
* fs/fat: Big code cleanup.Wolfgang Denk2010-07-242-549/+630
| | | | | | | | - reformat - throw out macros like FAT_DPRINT and FAT_DPRINT - remove dead code Signed-off-by: Wolfgang Denk <wd@denx.de>
* FAT32: fix broken root directory handling.Wolfgang Denk2010-07-241-10/+50
| | | | | | | | | | | | | | On FAT32, instead of fetching the cluster numbers from the FAT, the code assumed (incorrectly) that the clusters for the root directory were allocated contiguously. In the result, only the first cluster could be accessed. At the typical cluster size of 8 sectors this caused all accesses to files after the first 128 entries to fail - "fatls" would terminate after 128 files (usually displaying a bogus file name, occasionally even crashing the system), and "fatload" would fail to find any files that were not in the first directory cluster. Signed-off-by: Wolfgang Denk <wd@denx.de>
* FAT32: fix support for superfloppy-format (PBR)Wolfgang Denk2010-07-241-2/+5
| | | | | | | | "Superfloppy" format (in U-Boot called PBR) did not work for FAT32 as the file system type string is at a different location. Add support for FAT32. Signed-off-by: Wolfgang Denk <wd@denx.de>
* nios: remove nios-32 archThomas Chou2010-05-281-3/+0
| | | | | | The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* FAT replace compare_sign with strncmp.Tom Rix2009-06-121-33/+3
| | | | | | | | | | | The static function compare_sign is only used to compare the fs_type string and does not do anything more than what strncmp does. The addition of the trailing '\0' to fs_type, while legal, is not needed because the it is never printed out and strncmp does not depend on NULL terminated strings. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* mflash: Initial mflash supportunsik Kim2009-04-031-0/+2
| | | | | | | | | | | | | | | | | | | | Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
* fat.c: fix warning: array subscript is above array boundsWolfgang Denk2009-01-271-3/+7
| | | | | | Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>. Signed-off-by: Wolfgang Denk <wd@denx.de>
* fat: fix unaligned errorsBryan Wu2009-01-241-3/+5
| | | | | | | | | | A couple of buffers in the fat code are declared as an array of bytes. But it is then cast up to a structure with 16bit and 32bit members. Since GCC assumes structure alignment here, we have to force the buffers to be aligned according to the structure usage. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* fs/fat: handle FAT on SATASonic Zhang2008-12-101-0/+3
| | | | | | | The FAT file system driver should also handle FAT on SATA devices. Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Remove non-ascii characters from fat codeRemy Bohmer2008-12-041-2/+2
| | | | | | | | | | | | This code contains some non-ascii characters in comment lines and code. Most editors do not display those characters properly and editing those files results always in diffs at these places which are usually not required to be changed at all. This is error prone. So, remove those weird characters and replace them by normal C-style equivalents for which the proper defines were already in the header. Signed-off-by: Remy Bohmer <linux@bohmer.net>
* fs: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-08-313-11/+3
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix checking fat32 cluster size.michael2008-03-031-4/+4
| | | | | | | | | This fixes the cluster size tests in the FAT32 file system. The current implementation of VFAT support doesn't work if the referred cluster has an offset > 16bit representation, causing "fatload" and "fatls" commands etc. to fail. Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
* Fix CONFIG_MMC usage in fat codeAndy Fleming2008-02-141-1/+1
| | | | | | | | A #if statement in fat.c depended on CONFIG_MMC, instead of defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined as "1" rather than just defined. Now it's better. Signed-off-by: Andy Fleming <afleming@freescale.com>
* Fix my own merge stupidityAndy Fleming2008-01-091-34/+29
| | | | | | | | | | | | | | | Way back in August I merged Heiko's patch: 566a494f592: [PCS440EP] upgrade the PCS440EP board with Jon's CONFIG_COMMANDS patches. This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 However, in the process, I left out some of Heiko's good changes. Now Heiko's and Jon's patches are properly merged in fat_register_device() Signed-off-by: Andy Fleming <afleming@freescale.com>
* Fix missing brace error in fs/fat/fat.cWolfgang Denk2007-08-071-28/+29
| | | | | | [pointed out by Roderik Wildenburg] Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'testing' into workingAndy Fleming2007-08-032-10/+18
|\ | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| * fs/: Remove obsolete references to CONFIG_COMMANDSJon Loeliger2007-07-092-10/+10
| | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger2007-07-042-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
OpenPOWER on IntegriCloud