summaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAgeFilesLines
* input: Change LED state bits to conform i8042 compatible keyboardBin Meng2015-11-191-3/+3
| | | | | | | | | | | | When sending LED update command to an i8042 compatible keyboard, bit1 is 'Num Lock' and bit2 is 'Caps Lock' in the data byte. But input library defines bit1 as 'Caps Lock' and bit2 as 'Num Lock'. This causes a wrong LED to be set on an i8042 compatible keyboard. Change the LED state bits to be i8042 compatible, and change the keyboard flags as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* input: Call keyboard's update_leds() method when the LEDs changeBin Meng2015-11-191-0/+15
| | | | | | | | | | We should request keyboard to turn on/off its LED when detecting any changes on the LEDs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Minor changes to allow this to build without CONFIG_DM_KEYBOARD: Signed-off-by: Simon Glass <sjg@chromium.org>
* input: Save keyboard's LED state to correct placeBin Meng2015-11-191-1/+1
| | | | | | | | Currently keyboard's LED state is wrongly saved to config->leds in process_modifier(). It should really be config->flags. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* input: Convert 'keyboard' driver to use input librarySimon Glass2015-11-191-252/+38
| | | | | | | | | | This has duplicated scan code tables and logic. We can use the input library to implement most of the features here. This needs testing. The only supported board appears to be TQM5200. Unfortunately no maintainer is listed for this board. Signed-off-by: Simon Glass <sjg@chromium.org>
* video: input: Clean up after i8042 conversionSimon Glass2015-11-191-16/+4
| | | | | | | | | Now that i8042 uses driver model, adjust other mentions of it and remove old code that is no-longer used. Update the README and unify the keyboard text into one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* i8042: Handle a duplicate power-on-reset responseSimon Glass2015-11-191-2/+19
| | | | | | | | | | Sometimes we seem to get 0xaa twice which causes the config read to fail. This causes chromebook_link to fail to set up the keyboard. Add a check for this and read the config again when detected. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Convert i8042 to driver modelSimon Glass2015-11-192-35/+76
| | | | | | | | | Adjust this driver to support driver model. The only users are x86 boards so this should be safe. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* input: Add a Kconfig option for the i8042 keyboardSimon Glass2015-11-191-0/+10
| | | | | | | | Add a new option CONFIG_I8042_KEYB which will replace the current CONFIG_I8042_KBD. This new name fits better with existing drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: i8042: Convert to use the input librarySimon Glass2015-11-191-424/+69
| | | | | | | | | | | | At present the i8042 driver has its own logic and keymaps. In an effort to unify the code, move it over to use the input library. This changes most of the keycode-processing logic since it is now in that library. The main responsibilities of the driver are now to handle the LEDs, deal with the PS/2 extended keycodes and initialise the the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* input: Allow updating of keyboard LEDsSimon Glass2015-11-191-0/+9
| | | | | | | | Add a function which returns a new keyboard LED value when the LEDs need updating. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Handle caps lockSimon Glass2015-11-191-5/+8
| | | | | | | | | When caps lock is enabled we should convert lower case to upper case. Add this to the input key processing so that caps lock works correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* input: Adjust structure of code in process_modifier()Simon Glass2015-11-191-13/+14
| | | | | | | | Move all the '!release' code into one block so that it is clear that it only applies on key release. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Support the German keymapSimon Glass2015-11-193-14/+99
| | | | | | | | Add support for the German keymap, taken from i8042.c. This can be selected when the input library it initialised. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* sandbox: add a sandbox timer and basic testThomas Chou2015-11-193-0/+61
| | | | | | | | Add a sandbox timer which get time from host os and a basic test. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* input: Allow repeat filtering to be disabledSimon Glass2015-11-191-2/+7
| | | | | | | | | | | | | Generally the input library handles processing of a list of scanned keys. Repeated keys need to be generated based on a timer in this case, since all that is provided is a list of keys current depressed. Keyboards which do their own scanning will resend codes when they want to inject a repeating key. Provide a function which tells the input library to accept repeating keys and not to try to second-guess the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Add a function to add a keycode to the existing setSimon Glass2015-11-191-4/+42
| | | | | | | | | | | | | | | | | | | | | | Most keyboards can be scanned to produce a list of the keycodes which are depressed. With the i8042 keyboard this scanning is done internally and only the processed results are returned. In this case, when a key is pressed, a 'make' code is sent. When the key is released a 'break' code is sent. This means that the driver needs to keep track of which keys are pressed. It also means that any protocol error can lead to stuck keys. In order to support this type of keyboard, add a function when can be used to provide a single keycode and either add it to the list of what is pressed or remove it from the list. Then the normal input_send_keycodes() function can be used to actually do the decoding work. Add debugging to display the ASCII characters written to the input queue also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Add a few more keyboard keycodesSimon Glass2015-11-191-3/+3
| | | | | | | The slash and * are missing from the keycode tables. Add these so that these keypad keys can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
* input: Correct keycode for Ctrl-YSimon Glass2015-11-191-1/+1
| | | | | | This code is currently incorrect, perhaps due to a typo. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
* i8042: Adjust keyboard init to assume successSimon Glass2015-11-191-10/+9
| | | | | | | | | Modify i8042_kbd_init() so that the normal pass is sucessful init and failure exits early. This will make the code easier to extend and is easier to read. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* i8042: Adjust kbd_reset() to collect all failuresSimon Glass2015-11-191-5/+8
| | | | | | | Rather than lots of 'return' statements, use goto to a single return. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* i8042: Use functions to handle register accessSimon Glass2015-11-191-31/+44
| | | | | | | | | | | | | At present the register access in kbd_reset() is quite primitive. This makes it hard to follow. Create functions to read and write data, both to a single register, and via the command/data approach. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-on: Intel Crown Bay and QEMU Tested-by: Bin Meng <bmeng.cn@gmail.com>
* video: Drop unused console functionsSimon Glass2015-11-192-76/+9
| | | | | | | | | | | | | | | | | | CONFIG_CONSOLE_CURSOR, CONFIG_SYS_CONSOLE_BLINK_COUNT and CONFIG_CONSOLE_TIME are not used by any board. The implementation is not great and stands in the way of a refactor of i8042. Drop these for now. They can be re-introduced quite easily later, perhaps with driver-model real-time-clock (RTC) support. When reintroducing, it might be useful to make a few changes: - Blink time would be more useful than blink count - The confusing #ifdefs should be avoided - The time functions should support driver model - It would be best keyed off console_tstc() or some similar idle loop rather than a particular input driver (i8042 in this case) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: cros_ec: Convert cros_ec keyboard driver to driver modelSimon Glass2015-11-191-90/+58
| | | | | | | | Adjust the cros_ec keyboard driver to support driver model. Make this the default for all Exynos boards so that those that use a keyboard will build correctly with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: tegra: Convert keyboard driver to driver modelSimon Glass2015-11-191-132/+111
| | | | | | | | Adjust the tegra keyboard driver to support driver model, using the new uclass. Make this the default for all Tegra boards so that those that use a keyboard will build correctly with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* cros_ec: Use udevice instead of cros_ec_dev for keyboard functionsSimon Glass2015-11-192-7/+11
| | | | | | | In preparation for converting the cros_ec keyboard driver to driver model, adjust the cros_ec functions it will use to use a normal struct udevice. Signed-off-by: Simon Glass <sjg@chromium.org>
* input: Add the keycode translation tables separatelySimon Glass2015-11-193-9/+19
| | | | | | | | | Require the caller to add the keycode translation tables separately so that it can select which ones to use. In a later patch we will add the option to add German tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* input: Return -ENOSPC when there is not spaceSimon Glass2015-11-191-1/+2
| | | | | | | Return a useful error instead of -1 when something goes wrong. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: input: Create a keyboard uclassSimon Glass2015-11-193-0/+102
| | | | | | | | | Add a uclass for keyboard input, mirroring the existing stdio methods. This is enabled by a new CONFIG_DM_KEYBOARD option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2015-11-196-121/+20
|\
| * sf: Correct flash->flags for SST flashBin Meng2015-11-181-4/+5
| | | | | | | | | | | | | | | | flash->flags for SST flash should be updated for both DM and non-DM flash drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * spi: sf_ops: Check the return value from spi_flash_cmd_read_status()Fabio Estevam2015-11-181-2/+8
| | | | | | | | | | | | | | | | | | | | | | We should check the return value from spi_flash_cmd_read_status() and propagate it in the case of error. This fixes a defect caught by Coverity. Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * sf: Add lock ops for SST SPI NOR flashFabio Estevam2015-11-183-3/+5
| | | | | | | | | | | | | | | | | | | | SST SPI NOR flash has the same locking programming bits as ST Micro - added support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> [Minor change on commit message] Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
| * sf: Remove eeprom_m95xxx test driverJagan Teki2015-11-182-112/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The relevent boards which used this driver got zapped in previous release and the driver is never used in the code and also it doesn't use/do any spi-flash operations. Commit details for relevent removed boards: "ARM: at91: remove non-generic boards" (sha1: f6b42c140387589ded24749781ce565571092eac) Cc: Tom Rini <trini@konsulko.com> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
| * spi: ti_qspi: Add dummy readl for bus syncVignesh R2015-11-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | Add dummy readl after invalidating cmd field of QSPI_CMD_REG to ensure bus sync. Without this device's CS is not deactivated reliably leading to failure to enumerate flash or failure to set quad enable bit on Macronix flash present on am437x-sk and am437x-idk evms. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini2015-11-195-34/+315
|\ \
| * | zynq: sdhci: Define max clock by macroMichal Simek2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | zc1571 with silicon can operate on 200MHz maximum frequency. Setup this frequency by default and fix setting for ep108. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | net: zynq: Fix MDC setting for zynqMichal Simek2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on spec: "MDC must not exceed 2.5 MHz (MDC is only active during MDIO read and write operations)" Zynq is running on 111MHz. Current setting is 32 which is 111/32=3.47 which is above of 2.5MHz. Using 48 divider will give us correct setting according spec (111/48=2.31). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Remove unused MDCCLKDIV2 macroMichal Simek2015-11-191-1/+0
| | | | | | | | | | | | | | | | | | | | | Driver cleanup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Fix mdc clock division setting for 100Mbit/sMichal Simek2015-11-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using set and clear macro is incorrect because it is not overwritting origin mdc clock division setup. For example origin setup is 8(0b001) and new setup is 64(0b100) which means 0b101 is setup which is 96 divider. Using writel to rewrite all setting like for 1000Mbit/s case. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Wait till packet is sentMichal Simek2015-11-191-1/+32
| | | | | | | | | | | | | | | | | | Wait till BD is processed to ensure that packet was sent successfully. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | net: zynq: Disable secondary queuesEdgar E. Iglesias2015-11-191-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zynq has no priority queues. ZynqMP has one priority queue and this change is required to get ethernet working. This patch was not needed on ep108 for uknown reason even it should be used. Tested on Zynq and ZynqMP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | net: zynq: Add dummy packet to fix packet duplication issueMichal Simek2015-11-191-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Target is duplicating packets. IP prefetches another BD and process it when the first one is sent. Adding one dummy BD to the chain fix the problem with packet duplication. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Do not report TX underrunMichal Simek2015-11-191-2/+0
| | | | | | | | | | | | | | | Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Setup BD when structures are filledMichal Simek2015-11-191-3/+3
| | | | | | | | | | | | | | | | | | | | | Fix incorrect sequence in BD handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Allocate BD_SPACE in connection to RX_BUFMichal Simek2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | BD_SEPRN_SPACE should not have hard coded value and it will be calculated based on the number of buffer descriptors that we would like to use. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Fix clearing statisticMichal Simek2015-11-191-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Previous loop was completely bogus. Iterration should go just over statistic counters. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Extend register description with offsetsMichal Simek2015-11-191-15/+15
| | | | | | | | | | | | | | | | | | | | | Extend comments with register offset to help with debuggging. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Add support for different PHY interface typesMichal Simek2015-11-191-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MII is setup by default for all cases. The most of boards are using RGMII but PHY drivers are not doing any specific setting that's why MII setting was working fine. With TI DP83867 is necessary to setup paramaters based on interface type. Use one setting per board for it which is something what will be removed when driver is moved to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: zynq: Add debug message to phyread/phywriteMichal Simek2015-11-191-1/+12
| | | | | | | | | | | | | | | | | | | | | Add debug messages to phyread/write to help with PHY debug. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: Add support for Texas Instruments DP83867Edgar E. Iglesias2015-11-193-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | Code is taken from Linux kernel driver (v4.2). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
OpenPOWER on IntegriCloud