summaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAgeFilesLines
* usb: pxa27x_udc: clean-up include file orderMarcel Ziswiler2015-08-241-3/+2
| | | | | | | Cleaning up order of include files by sorting them alphabetically keeping in mind to leave common.h on top. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* usb: dwc2: Rename to dwc2_usbMarek Vasut2015-08-191-1/+1
| | | | | | | This driver is not used only on exynos, but also on Altera SoCFPGA, HiSilicon SoCs, RPi etc, so rename it accordingly to prevent confusion. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: dwc2: Add original Synopsys compat stringMarek Vasut2015-08-191-0/+1
| | | | | | Add the Synopsys compatible string. This is used in SoCFPGA DT files. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: gadget: ether: populate _reset_ callbackKishon Vijay Abraham I2015-08-191-0/+1
| | | | | | | | | | | populate _reset_ callback to the USB ethernet gadget since UDC core expects every gadget driver to have the reset callback. This shouldn't be needed once the ethernet gadget driver is adapted to use the composite driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stopKishon Vijay Abraham I2015-08-191-0/+1
| | | | | | | | | | | | xhci omap driver has board_usb_init in xhci_hcd_init but doesn't have the corresponding cleanup function in xhci_hcd_stop. Fix it here by invoking board_usb_cleanup() in xhci_hcd_stop(). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: gadget: ether: Perform board initialization from ethernet gadget driverKishon Vijay Abraham I2015-08-191-0/+4
| | | | | | | | | | | Ethernet gadget driver can be used both by both SPL and u-boot. Since usb_eth_init() is the entry point for ethernet gadget driver, perform board initialization there. Also perform the cleanup in usb_eth_halt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: xhci: Fix a potential NULL pointer dereferenceSergey Temerkhanov2015-08-191-5/+14
| | | | | | | | | This patch fixes a potential NULL pointer dereference arising on non-present/non-initialized xHCI controllers and adds some error handling to xHCI code Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* usb: spear: Add support for both SPEAr600 EHCI controllersStefan Roese2015-08-191-3/+35
| | | | | | | | | | | USB EHCI on SPEAr600 has not been tested for a while. The base controller addresses are missing. This patch adds the defines to the header. And adds the missing code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Marek Vasut <marex@denx.de>
* imx: usb: ehci-mx6: wait_for_bit to check reg statusAdrian Alonso2015-08-191-4/+33
| | | | | | | Add wait_for_bit to check reg bit status and replace unbounded loops to check usb command status Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: add usb support for imx7d socAdrian Alonso2015-08-192-19/+82
| | | | | | Extend ehci-mx6 usb driver to support imx7d usb Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: document board specific functionsAdrian Alonso2015-08-191-0/+31
| | | | | | | | | | Document target board specific functions board_ehci_hcd_init - override usb phy mode board_ehci_hcd_init - set usb vbus voltage board_ehci_power - enables/disables usb vbus voltage Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: usb: ehci-mx6: reg accessor cleanupsAdrian Alonso2015-08-191-33/+18
| | | | | | Cleanup read/write register access, use clr/set bits_le32 Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* usb: lpc32xx: add host USB driverSylvain Lemieux2015-08-182-0/+232
| | | | | | | | | | | | | Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* arm: mvebu: add multiple usb-hostcontroller support for AXPAnton Schubert2015-08-171-8/+11
| | | | | | | | | | | This patch adds support for multiple hostcontrollers to the ehci-marvell driver and enables all 3 usb-hcs on the db-mv784mp-gp board. It depends on the initial Armada XP usb support patch from Stefan. Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: Enable USB EHCI support on Armada XPStefan Roese2015-08-171-1/+8
| | | | | | | | | | | | | | | | | This patch enables the USB EHCI support for the Marvell Armada XP (AXP) SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done this already in the bin_hdr (SPL U-Boot). Without this, accessing the controller registers in U-Boot or Linux will hang the CPU. Additionally, the AXP uses a different USB EHCI base address. This patch also takes care of this by runtime SoC detection in the Marvell EHCI driver. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Cc: Marek Vasut <marex@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* usb: ohci: enable cache supportWu, Josh2015-08-122-12/+2
| | | | | | | | Remove the CONFIG_DM_USB limitation to enable cache support functions. Tested on SAMA5D3x-EK board. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* dwc2: Add dcache supportAlexander Stein2015-08-121-7/+17
| | | | | | | | | | | This adds dcache support for dwc2. The DMA buffers must be DMA aligned and is flushed for outgoing transactions before starting transfer. For ingoing transactions it is invalidated after the transfer has finished. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> [trini: Update to apply again on top of DM patches] Signed-off-by: Tom Rini <trini@konsulko.com>
* sunxi: usb-phy: Never power off the usb portsHans de Goede2015-08-083-14/+16
| | | | | | | | | | | | | | | | | | | | | USB devices are not really designed to get the power bounced off and on at them. Esp. USB powered harddisks do not like this. Currently we power off the USB ports both on a "usb reset" and when booting the kernel, causing the usb-power to bounce off and then back on again. This patch removes the powering off calls, fixing the undesirable power bouncing. Note this requires some special handling for the OTG port: 1) We must skip the external vbus check if we've already enabled our own vbus to avoid false positives 2) If on an usb reset we no longer detect that the id-pin is grounded, turn off vbus as that means an external vbus may be present now Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge git://git.denx.de/u-boot-dmTom Rini2015-08-063-201/+524
|\
| * net: smsc95xx: Add driver-model supportSimon Glass2015-08-061-0/+142
| | | | | | | | | | | | | | Add support for driver model, so that CONFIG_DM_ETH can be defined and used with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Prepare for conversion to driver modelSimon Glass2015-08-061-122/+150
| | | | | | | | | | | | | | | | At present struct eth_device is passed around all over the place. This does not exist with driver model. Add explicit arguments instead, so that with driver model we can pass the correct things. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Correct the error numbersSimon Glass2015-08-061-22/+26
| | | | | | | | | | | | | | Instead of returning -1 on error, we should use a proper error number. Fix the code to conform to this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZESimon Glass2015-08-061-5/+5
| | | | | | | | | | | | | | The AX_ prefix comes from the Asix driver. Since this is not that, we should avoid this confusing prefix. Signed-off-by: Simon Glass <sjg@chromium.org>
| * net: smsc95xx: Sort the include filesSimon Glass2015-08-061-2/+3
| | | | | | | | | | | | Tidy up the include file order before adding more. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Add driver-model support to dwc2Simon Glass2015-08-061-0/+97
| | | | | | | | | | | | | | Add driver model support to this driver so it can be used with the new USB stack. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Prepare dwc2 driver for driver-model conversionSimon Glass2015-08-061-54/+104
| | | | | | | | | | | | | | Put all global data in a structure and move (what will be) common code into common functions. This will make the driver-model conversion much easier. Signed-off-by: Simon Glass <sjg@chromium.org>
| * dm: usb: Add an errno.h header to usb_ether.cSimon Glass2015-08-061-0/+1
| | | | | | | | | | | | This is required on some platforms, so add it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Tegra: clocks: Add 38.4MHz OSC support for T210 useTom Warren2015-08-051-5/+13
|/ | | | | | | | | | | | | | | Added 38.4MHz/48MHz entries to pll_x_table for CPU PLL. Needs to be measured - should be close to 700MHz (1.4G/2). Note that some freqs aren't in the PLLU table in T210 TRM (13, 26MHz), so I used the 12MHz table entry for them. They shouldn't be selected since they're not viable T210 OSC freqs. Since there are now 2 new OSC defines, all tables (pll_x_table, PLLU) had to increase by two entries, but since 38.4/48MHz are not viable osc freqs on T20/30/114, etc, they're just set to 0. Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: asix: fix operation without eepromMarcel Ziswiler2015-08-051-6/+34
| | | | | | | | | | This patch fixes operation of our on-board AX88772B chip without EEPROM but with a ethaddr coming from the regular U-Boot environment. This is a forward port of some remaining parts initially implemented by Antmicro. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: USB storage-specific part ifdef in uclassPaul Kocialkowski2015-08-051-0/+2
| | | | | | | usb_stor_reset is only defined when USB storage support is enabled, thus the function is not declared when such support is missing. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* musb: sunxi: Force EP0 on re-enableMaxime Ripard2015-08-051-0/+3
| | | | | | | | Currently, the second use of a gadget will fail, while the first one works. Forcing the EP0 at every enable fix this issue. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* sunxi: usb: USB_MUSB_SUNXI move to musb-new KconfigPaul Kocialkowski2015-08-051-0/+14
| | | | | | | | | | | Now that the musb-new driver has a Kconfig, we can move Kconfig options to enable controllers to it, so that it's easier in e.g. menuconfig. In addition, this allows declaring support for USB_MUSB_HOST/GADGET in defconfigs instead of the USB_MUSB_SUNXI controller, that will get selected automatically when needed. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: musb-new: Kconfig support for USB_MUSB_HOST and USB_MUSB_GADGETPaul Kocialkowski2015-08-052-0/+16
| | | | | | | Having MUSB_HOST and MUSB_GADGET in Kconfig allows more flexibility with regard to what Kconfig options to enable, such as USB_STORAGE or USB_KEYBOARD. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski2015-08-0512-35/+35
| | | | | | | | | USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: Generic USB Kconfig option, that fits both host and gadget and commentsPaul Kocialkowski2015-08-051-7/+8
| | | | | | | | | | | There is no particular reason why the USB Kconfig option should be specific to host mode. In prevision of adding MUSB host and gadget to Kconfig, this moves the title and help message of the USB Kconfig option to a more generic format. Adding comments to the usb Kconfig allows for a better separation and more readability in generated configs and in menuconfig. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: USB_ARCH_HAS_HCD Kconfig option removalPaul Kocialkowski2015-08-051-3/+0
| | | | | | | | | | The USB_ARCH_HAS_HCD currently serves no purpose and adds some confusion to the required Kconfig options that are required to have USB support. Dropping it makes things easier and doesn't break anything, since it was unused anyways. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
* usb: dwc2: Call board_usb_init() from usb_lowlevel_init()Peter Griffin2015-08-051-0/+4
| | | | | | | | | | This patch makes the dwc2 controller like ehci / ohci / xhci controllers by calling the board_usb_init() function from usb_lowlevel_init. This can then be implemented by specific platforms to initialise their USB hardware (phys / clocks etc). Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-022-0/+36
|\
| * usb: kconfig: create a menu for usbNikita Kiryanov2015-08-021-0/+2
| | | | | | | | | | | | | | | | | | | | With recent additions to USB Kconfig the number of USB options had grown large enough to warrant a separate menu for USB. Add a Kconfig menu for USB. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * usb: kconfig: usb keyboard kconfigNikita Kiryanov2015-08-021-0/+27
| | | | | | | | | | | | | | | | | | | | Add Kconfig options for USB keyboard and use them for cm-fx6. Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig optionNikita Kiryanov2015-08-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add USB_EHCI_MX6 option to menuconfig and use it when migrating cm-fx6 usb config to defconfig. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-281-1/+30
| | | | | | | | | | | | | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-07-251-20/+97
|\ \
| * | sunxi: musb: Stop treating not having a vbus-det gpio as an errorHans de Goede2015-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some boards the otg is wired up in host-only mode in this case we have no vbus-det gpio. Stop logging an error from sunxi_usb_phy_vbus_detect() in this case, and stop treating sunxi_usb_phy_vbus_detect() returning a negative errno, as if a charger is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: musb: Improve output during probingHans de Goede2015-07-251-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | When we return an error the usb core will print an error-message, so in this case do not print anything. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ian.campbell@citrix.com>
| * | sunxi: musb: Use device-model for musb host modeHans de Goede2015-07-251-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the sunxi musb glue to use the device-model for musb host mode. This allows using musb in host mode together with other host drivers such as ehci / ohci, which is esp. useful on boards which use the musb controller in host-only mode, these boards have e.g. an usb-a receptacle or an usb to sata converter attached to the musb controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: musb: Move musb config and platdata to the sunxi-musb glueHans de Goede2015-07-251-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: musb: Add id pin supportHans de Goede2015-07-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When in host mode check if there is a host cable inserted into the otg port by checking the id pin. If there is no host cable return an error to make usb_lowlevel_init() exit early, rather then waiting for 1 second for a device which will never show up. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: musb: Move vbus check to sunxi_musb_enableHans de Goede2015-07-251-10/+9
| | | | | | | | | | | | | | | | | | | | | This way it can be re-checked on "usb reset". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | Merge git://git.denx.de/u-boot-usbTom Rini2015-07-2414-285/+345
|\ \ \ | |/ / |/| |
OpenPOWER on IntegriCloud