summaryrefslogtreecommitdiffstats
path: root/drivers/serial
Commit message (Collapse)AuthorAgeFilesLines
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-52/+30
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2013-10-222-1/+17
|\
| * serial: sh: Add support R8A7791Nobuhiro Iwamatsu2013-10-171-4/+4
| | | | | | | | | | | | This adds the preset value to register for R8A7791. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * serial: sh: Add support R8A7790Nobuhiro Iwamatsu2013-10-172-0/+14
| | | | | | | | | | | | | | This adds the preset value to register, and setup of baudrate. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * serial: sh: Change definition of clock of SCIFNobuhiro Iwamatsu2013-10-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | The former SH/SCIF driver had calculated baudrate based on CONFIG_SYS_CLK_FREQ. The newest SH/SCIF needs calculation of the clock for SCIF. This patch defines clock CONFIG_SH_SCIF_CLK_FREQ for SCIF and changes it to CONFIG_SH_SCIF_CLK_FREQ from CONFIG_SYS_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
* | usb: udc: add udc.h include fileTroy Kisky2013-10-201-2/+1
|/ | | | | | | Move common definitions to udc.h This allows musb_udc.h to be removed as well. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* drivers: serial_s3c44b0: delete an unused driverMasahiro Yamada2013-09-193-219/+0
| | | | | | | | | Since commit 5dc5f36 removed B2 board support, there are no boards enabling serial_s3c44b0. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Andrea Scian <andrea.scian@dave-tech.it>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-053-0/+154
|\ | | | | | | | | | | | | | | Conflicts: drivers/serial/serial.c The conflict above was a trivial case of adding one init function in each branch, and manually resolved in merge.
| * ARM: mxs: Added application UART driverAndreas Wass2013-08-213-0/+154
| | | | | | | | | | | | | | | | | | | | The driver makes it possible to use an application UART as the U-Boot output console for Freescale i.MX23/i.MX28 devices. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* | serial: arm_dcc: Convert to use default_serial_putsAxel Lin2013-08-191-7/+1
| | | | | | | | | | | | | | | | Use default_serial_puts() instead of its own implementation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Michal Simek <monstr@monstr.eu>
* | Merge branch 'master' of git://88.191.163.10/u-boot-armTom Rini2013-08-181-2/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini <trini@ti.com>
| * | Prepare for TI816X : reuse existing code from TI814XTENART Antoine2013-08-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: AM43xx: Add build supportLokesh Vutla2013-08-151-2/+3
| |/ | | | | | | | | | | Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | serial: arm_dcc: Register with serial coreJagannadha Sutradharudu Teki2013-08-132-6/+29
| | | | | | | | | | | | | | Register arm_dcc with drivers/serial/serial.c Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | serial: arm_dcc: Remove stdio structure supportJagannadha Sutradharudu Teki2013-08-131-16/+0
| | | | | | | | | | | | | | | | | | Removed stdio structure ops support on arm_dcc driver, and need to register with serial core so-that it can access like remianing serial drivers. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | usb: mv_udc: Unbreak the mv_udc driverMarek Vasut2013-07-291-0/+2
|/ | | | | | | | | | | | The mv_udc driver is broken for a while and doesn't even compile. This patch fixes the issues and gets the driver into working state again. This driver was tested on Freescale i.MX233/i.MX28 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-2429-448/+34
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-121-0/+78
|\ | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
| * S5P: Serial: Add fdt support to driverRajeshwari Shinde2013-06-241-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds FDT support to the serial s5p driver. At present disabling the serial console (from the device tree) crashes U-Boot. Add checks for this case, so that execution can continue without a serial console. It also enables the serial_s5p driver recognize the silent_console option. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | serial: Use ARRAY_SIZE instead of reinventing itAxel Lin2013-06-261-3/+2
|/ | | | Signed-off-by: Axel Lin <axel.lin@ingics.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-191-4/+9
|\ | | | | | | | | Conflicts: spl/Makefile
| * Exynos: uart: s5p: enabling the uart tx/rx fifoAkshay Saraswat2013-05-211-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | This patch enables the uart tx/rx fifo. Now that fifo is enabled, the uart read/write functions are modfied to check the UFSTAT register for fifo status instead of UTRSTAT (as required with fifo's enabled). Tested by booting linux kernel. Before enabling tx/rx fifo "Uncompressing linux" message is garbled and after enabling it is proper. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | arm: Remove OMAP2420H4 and all omap24xx supportTom Rini2013-06-102-10/+0
| | | | | | | | | | | | | | | | | | The omap2420H4 was the only mainline omap24xx board. Prior to being fixed by Jon Hunter in time for v2013.04 it had been functionally broken for a very long time. Remove this board as there's not been interest in it in U-Boot for quite a long time. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-06-082-0/+133
|\ \ | | | | | | | | | | | | Conflicts: drivers/serial/Makefile
| * | arm: vf610: Add uart support for Vybrid VF610Alison Wang2013-06-032-0/+133
| |/ | | | | | | | | | | | | This patch adds lpuart support for Vybrid VF610 platform. Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Alison Wang <b18965@freescale.com>
* | Power: remove support for Freescale MPC8220Wolfgang Denk2013-05-151-2/+0
| | | | | | | | | | | | | | | | | | | | The Freescale MPC8220 Power Architecture processors have long reached EOL; Freescale does not even list these any more on their web site. Remove the code to avoid wasting maitaining efforts on dead stuff. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andy Fleming <afleming@gmail.com>
* | blackfin: Move blackfin serial driver out of blackfin arch folder.Sonic Zhang2013-05-132-0/+412
|/ | | | | | | | - Move blackfin serial driver to the generic driver folder. - Move blackfin serial headers to blackfin arch head folder. - Update the include path to blackfin serial header in start up code. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-121-2/+2
|\ | | | | | | | | Conflicts: drivers/video/exynos_fb.c
| * Consolidate bool typeYork Sun2013-04-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* | arm: Remove support for unused s3c64xxBenoît Thébaudeau2013-04-123-190/+0
| | | | | | | | | | | | | | | | Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so remove associated code. It will still be possible to restore it later from the Git history if necessary. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | omap3_beagle: Flush UART3 xmit on enable if TEMT is brokenManfred Huber2013-04-081-2/+16
|/ | | | | | | | | | | | Flush UART3 xmit on enable if TEMT is broken On some OMAP3 devices when UART3 is configured for boot mode before SPL starts only THRE bit is set. We have to empty the transmitter before initialization starts. This patch avoids the use of CONFIG_SYS_NS16550_BROKEN_TEMT. Signed-off-by: Manfred Huber <man.huber@arcor.de> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
* ns16550: enable quirks for ti814xMatt Porter2013-03-241-2/+3
| | | | | | | TI814X requires the same quirks as AM33XX to be enabled. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-03-181-1/+1
|\
| * usbtty: adapt buffers for large packet supportShiraz Hashim2013-03-161-1/+1
| | | | | | | | | | | | | | Increase buffer sizes at driver and tty level to accommodate kermit large packet support. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-183-221/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * Merge u-boot/master into u-boot-ti/masterTom Rini2013-03-112-6/+50
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In master we had already taken a patch to fix the davinci GPIO code for CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850). Resolve these conflicts manually and comment the #else/#endif lines for clarity. Conflicts: arch/arm/include/asm/arch-davinci/gpio.h drivers/gpio/da8xx_gpio.c Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: ns9750dev: remove remainders of dead boardWolfgang Denk2013-02-283-221/+0
| | | | | | | | | | | | | | | | | | | | | | | | Commit 8b710b1 started removing code for the unmaintained "ns9750dev" board; the board support is still broken, and not included anywhere in the Makefile or boards.cfg. Remove the remaining dead code. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | serial: ns16550: Remove unwanted castSimon Glass2013-03-151-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | This cast does not seem correct, since we should be writing to a pointer, not a ulong. This fixes the following warning on nds32: -ns16550.c:49: warning: passing argument 2 of 'writeb' makes pointer from integer without a cast Signed-off-by: Simon Glass <sjg@chromium.org>
* | sandbox: Improve sandbox serial port keyboard interfaceTaylor Hutt2013-02-281-6/+38
| | | | | | | | | | | | | | | | | | | | | | Implements the tstc() interface for the serial driver. Multiplexing the console between the serial port and a keyboard uses a polling method of checking if characters are available; this means that the serial console must be non-blocking when attempting to read characters. Signed-off-by: Taylor Hutt <thutt@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | serial/ns16550: don't generate functions for undefined portsScott Wood2013-02-191-0/+12
|/ | | | | | | This saved 640 bytes on MPC8536DS (a board with two of the six ports defined). Signed-off-by: Scott Wood <scottwood@freescale.com>
* serial: arm_dcc: Fix compilation warning and remove unneeded initializationMichal Simek2013-02-041-5/+0
| | | | | | | | | | | - arm_dcc_dev is already initialized. - Remove unused rc variable Warning log: arm_dcc.c: In function 'drv_arm_dcc_init': arm_dcc.c:145:6: warning: unused variable 'rc' [-Wunused-variable] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI optionMichal Simek2013-02-041-11/+5
| | | | | | | | | | | | | | | CONFIG_ARM_DCC_MULTI should be also removed in the patch "serial: Remove CONFIG_SERIAL_MULTI from serial drivers" (sha1: a3827250606895ec2dd4b8d867342b7cabf3692f) Because the driver defines serial_* functions which cause conflict with serial.c (multiple definition of serial_*) Removing CONFIG_SERIAL_MULTI function also require to define default_serial_console for cases where another serial driver is not available in the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-01-111-0/+2
|\
| * serial/ns16550: add an option to avoid hanging on broken platformsJavier Martinez Canillas2013-01-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms (e.g. IGEPv2 board) has a broken ns16550 UART that does not set the TEMT bit when the transmitter is empty in SPL. This makes U-Boot to hang while waiting for TEMT to be set. Add a new option to avoid this: CONFIG_SYS_NS16550_BROKEN_TEMT 16550 UART set the Transmitter Empty (TEMT) Bit when all output has finished and the transmitter is totally empty. U-Boot waits for this bit to be set to initialize the serial console. On some broken platforms this bit is not set in SPL making U-Boot to hang while waiting for TEMT. Define this option to avoid it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-12-221-1/+2
|\ \ | |/
| * Merge remote-tracking branch 'u-boot/master' into u-boot-arm-mergedAllen Martin2012-12-195-9/+92
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * | s3c64xx: fix the compiler error and warningMinkyu Kang2012-11-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is fixing the following errors s3c64xx.c:175: error: variable 's3c64xx_serial_drv' has initializer but incomplete type s3c64xx.c:176: error: unknown field 'name' specified in initializer s3c64xx.c:176: warning: excess elements in struct initializer s3c64xx.c:176: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:177: error: unknown field 'start' specified in initializer s3c64xx.c:177: warning: excess elements in struct initializer s3c64xx.c:177: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:178: error: unknown field 'stop' specified in initializer s3c64xx.c:178: warning: excess elements in struct initializer s3c64xx.c:178: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:179: error: unknown field 'setbrg' specified in initializer s3c64xx.c:179: warning: excess elements in struct initializer s3c64xx.c:179: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:180: error: unknown field 'putc' specified in initializer s3c64xx.c:180: warning: excess elements in struct initializer s3c64xx.c:180: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:181: error: unknown field 'puts' specified in initializer s3c64xx.c:181: warning: excess elements in struct initializer s3c64xx.c:181: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:182: error: unknown field 'getc' specified in initializer s3c64xx.c:182: warning: excess elements in struct initializer s3c64xx.c:182: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c:183: error: unknown field 'tstc' specified in initializer s3c64xx.c:183: warning: excess elements in struct initializer s3c64xx.c:183: warning: (near initialization for 's3c64xx_serial_drv') s3c64xx.c: In function 's3c64xx_serial_initialize': s3c64xx.c:188: warning: implicit declaration of function 'serial_register' s3c64xx.c: At top level: s3c64xx.c:191: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'struct' Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
* | | serial_sh: Add support Renesas SH7752Yoshihiro Shimoda2012-12-201-1/+1
| |/ |/| | | | | | | Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | env: Add a baudrate env handlerJoe Hershberger2012-12-131-0/+70
| | | | | | | | | | | | Remove the hard-coded baudrate handler and use a callback instead Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | serial_pl011: Set RTS during initializationJoshua Housh2012-12-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | If the pl011 is connected to another device which has hardware flow-control on, characters are never received by the pl011. Asserting RTS when flow-control is off will have no effect. This is in line with how Linux behaves. Signed-off-by: Joshua Housh <joshua.housh@calxeda.com> Tested-by: Marek Vasut <marex@denx.de>
OpenPOWER on IntegriCloud