summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* gpio: uniphier: add driver for UniPhier GPIO controllerMasahiro Yamada2016-02-291-0/+1
| | | | | | | This GPIO controller device is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
* drivers: gpio: add driver for Microchip PIC32 GPIO controller.Purna Chandra Mandal2016-02-011-1/+1
| | | | | | | | | | | | In PIC32 GPIO controller is part of PIC32 pin controller. PIC32 has ten independently programmable ports and each with multiple pins. Each of these pins can be configured and used as GPIO, provided they are not in use for other peripherals. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* gpio: atmel: Add the PIO4 driver supportWenyou Yang2015-11-301-0/+1
| | | | | | | The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
* rockchip: gpio: Add rockchip GPIO driverSimon Glass2015-09-021-0/+1
| | | | | | | This supports RK3288 at present. It does not implement functions or support for pull up/down. Signed-off-by: Simon Glass <sjg@chromium.org>
* gpio: Add DW APB GPIO driverMarek Vasut2015-08-231-0/+1
| | | | | | | | Add driver for the DesignWare APB GPIO IP block. This driver is DM capable and probes from DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org>
* dm: gpio: hi6220: Add a hi6220 GPIO driver model driver.Peter Griffin2015-08-121-0/+2
| | | | | | | This patch adds support for the GPIO perif found on hi6220 SoC. Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* dm: gpio: Allow GPIO uclass to be used in SPLSimon Glass2015-07-211-4/+0
| | | | | | | Now that we support driver model in SPL, allow GPIO drivers to be used there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: vf610: Add GPIO driver supportBhuvanchandra DV2015-06-081-0/+1
| | | | | | Add GPIO driver support to Freescale VF610 Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
* sunxi: axp: Move axp gpio code to a separate axpi-gpio driverHans de Goede2015-05-041-0/+1
| | | | | | | | | | | | | | | | | | | | Move the axp-gpio code out of the drivers/power/axp*.c code, and into a new separate axpi-gpio driver. This change drops supports for the gpio3 pin on the axp209, as that requires special handling, and no boards are using it. Besides cleaning things up by moving the code to a separate driver, as a bonus this change also adds support for the (non vusb) gpio pins on the axp221 and the gpio pins on the axp152. The new axp-gpio driver gets its own Kconfig option, and is only enabled on boards which need it. Besides that it only gets enabled in the regular u-boot build and not for the SPL as we never need it in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* gpio: add Xilinx Zynq PS GPIO driverAndrea Scian2015-04-291-0/+1
| | | | | | | | | Most of the code is taken (and adapted) from Linux kernel driver. Just add CONFIG_ZYNQ_GPIO to you config to enable it Signed-off-by: Andrea Scian <andrea.scian@dave.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARMv7M: Add STM32F4 supportrev13@wp.pl2015-04-221-0/+1
| | | | | Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
* lpc32xx: add GPIO supportAlbert ARIBAUD \(3ADEV\)2015-04-101-0/+1
| | | | | | This driver only supports Driver Model, not legacy model. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* dm: tegra: Enable driver model in SPL and adjust the GPIO driverSimon Glass2015-03-041-0/+4
| | | | | | | | | | | Use the full driver model GPIO and serial drivers in SPL now that these are supported. Since device tree is not available they will use platform data. Remove the special SPL GPIO function as it is no longer needed. This is all in one commit to maintain bisectability. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-281-0/+1
|\
| * sunxi: add gpio driverIan Campbell2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables CONFIG_CMD_GPIO for the Allwinner (sunxi) platform as well as providing the common gpio API (gpio_request/free, direction in/out, get/set etc). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Henrik Nordström <henrik@henriknordstrom.net> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* | dm: gpio: Don't use the driver model uclass for SPLSimon Glass2014-07-231-0/+2
|/ | | | | | | Driver model does not support SPL yet, so we should not use the GPIO uclass for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add GPIO support and testsSimon Glass2014-03-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Add driver model support for GPIOs. Since existing GPIO drivers do not use driver model, this feature must be enabled by CONFIG_DM_GPIO. After all GPO drivers are converted over we can perhaps remove this config. Tests are provided for the sandbox implementation, and are a sufficient sanity check for basic operation. The GPIO uclass understands the concept of named banks of GPIOs, with each GPIO device providing a single bank. Within each bank the GPIOs are numbered using an offset from 0 to n-1. For example a bank named 'b' with 20 offsets will provide GPIOs named b0 to b19. Anonymous GPIO banks are also supported, and are just numbered without any prefix. Each time a GPIO driver is added to the uclass, the GPIOs are renumbered accordinging, so there is always a global GPIO numbering order. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com> Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
* gpio: kona: Add Kona gpio driverDarwin Rambo2014-02-221-0/+1
| | | | | | | | | Add support for the Kona GPIO controller found on Broadcom mobile SoCs. Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Steve Rae <srae@broadcom.com> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tkryger@linaro.org>
* Add support for SX151x SPI GPIO ExpandersViktar Palstsiuk2013-11-081-0/+1
| | | | Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
* drivers: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-48/+25
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* gpio: tca642x: Add the tca642x gpio expander driverDan Murphy2013-07-301-0/+1
| | | | | | | | | Add the tca642x gpio expander driver Datasheet: http://www.ti.com/product/tca6424a Signed-off-by: Dan Murphy <dmurphy@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-241-17/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* bfin: Move gpio support for bf54x and bf60x into the generic driver folder.Sonic Zhang2013-05-131-0/+1
| | | | | | | | | | | | | | | The gpio spec for bf54x and bf60x differ a lot from the old gpio driver for bf5xx. A lot of machine macros are used to accomodate both code in one gpio driver. This patch split the old gpio driver and move new gpio2 support to the generic gpio driver folder. - To enable gpio2 driver, macro CONFIG_ADI_GPIO2 should be defined in the board's config header file. - The gpio2 driver supports bf54x, bf60x and future ADI processors, while the older gpio driver supports bf50x, bf51x, bf52x, bf53x and bf561. - All blackfin specific gpio function names are replaced by the generic gpio APIs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* gpio: Add support for microblaze xilinx GPIOMichal Simek2013-05-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Microblaze uses gpio which is connected to the system reset. Currently gpio subsystem wasn't used for it. Add gpio driver and change Microblaze reset logic to be done via gpio subsystem. There are various configurations which Microblaze can have that's why gpio_alloc/gpio_alloc_dual(for dual channel) function has been introduced and gpio can be allocated dynamically. Adding several gpios IP is also possible and supported. For listing gpio configuration please use "gpio status" command This patch also remove one compilation warning: microblaze-generic.c: In function 'do_reset': microblaze-generic.c:38:47: warning: operation on '*1073741824u' may be undefined [-Wsequence-point] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* gpio: Build the da8xx_gpio code for the davinci644x deviceHolger Hans Peter Freyther2013-02-201-0/+1
| | | | | | | The differences include the number of GPIOs and that one is not required to set the pinmux on request. Signed-off-by: Holger Hans Peter Freyther <holger@freyther.de>
* x86: gpio: Add GPIO driver for Intel ICH6 and later.Bill Richardson2012-12-061-0/+1
| | | | | | | | | Implement <asm-generic/gpio.h> functions for Intel ICH6 and later. Only GPIOs 0-31 are handled by this code. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM : Add GPIO Driver and IOMUX definition for S3C2440Gabriel Huau2012-10-031-0/+1
| | | | | | | It's now possible to use the gpio driver interface for s3c2440. This patch add iomux definitions too. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
* ARM: add basic support for the Broadcom BCM2835 SoCStephen Warren2012-09-011-0/+1
| | | | | | | | | | | | | | | | | This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* snowball: Add support for ux500 based snowball boardMathieu J. Poirier2012-09-011-0/+1
| | | | | | | | | | | Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Tom Rini <trini@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/gpio/Makefile
* dm: Move OMAP GPIO driver to drivers/gpio/Marek Vasut2012-09-011-0/+1
| | | | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: U-Boot DM <u-boot-dm@lists.denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* sh: Add support pin function control using GPIONobuhiro Iwamatsu2012-08-081-0/+1
| | | | | | | | Renesas SH and R-Mobile set up device using PFC. This provide the framework. Most codes were brought from linux kernel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* GPIO: Add SPEAr GPIO driverStefan Roese2012-07-071-0/+1
| | | | | | Tested on x600 (SPEAr600). Signed-off-by: Stefan Roese <sr@denx.de>
* gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*Tom Warren2012-07-071-1/+1
| | | | | | | | In anticipation of Tegra3 support, continue removing/renaming Tegra2-specific files. No functional changes (yet). Updated copyrights to 2012. Signed-off-by: Tom Warren <twarren@nvidia.com>
* sandbox: gpio: add basic driver for simulating GPIOsSimon Glass2012-03-121-0/+1
| | | | | | | | This provides a way of simulating GPIOs by setting values which are seen by the normal gpio_get/set_value() calls. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* mpc83xx: Add a GPIO driver for the MPC83XX familyJoe Hershberger2012-01-091-0/+1
| | | | | | Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-niosWolfgang Denk2011-11-211-0/+1
|\ | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-nios: nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet(). board/nios2-generic: Use altera_pio driver and remove board specific driver gpio: Add driver for Altera's PIO core nios2: Pseudo implement dcache_status/enable/disable()
| * gpio: Add driver for Altera's PIO coreJoachim Foerster2011-10-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This driver may handle multiple PIO cores and thus needs to be setup by calling the altera_pio_init() function within the early board setup routine. The driver comes with some extras, see below the copyleft header. Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Tested-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | iMX28: Add GPIO controlMarek Vasut2011-11-111-0/+1
|/ | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
* gpio: Add PCA9698 40-bit I2C I/O portDirk Eibach2011-10-221-0/+1
| | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de>
* gpio: Add GPIO driver framework for Marvell SoCsAjay Bhargav2011-09-301-0/+1
| | | | | | | | | This patch adds generic GPIO driver framework support for Marvell SoCs. To enable GPIO driver define CONFIG_MARVELL_GPIO and for GPIO commands define CONFIG_CMD_GPIO in your board configuration file. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
* DA8xx: add generic GPIO driverLaurence Withers2011-08-031-0/+1
| | | | | | | | | | | Add a generic GPIO driver for the DaVinci DA8xx processors. It is turned on by defining CONFIG_DA8XX_GPIO and fulfills the generic GPIO interface specified in <asm/gpio.h> . The driver has support for both manipulating GPIO pins as well as automatically configuring the pin multiplexor registers to set the pin function to GPIO. Signed-off-by: Laurence Withers <lwithers@guralp.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* GPIO: Tegra2: add GPIO driver for Tegra2Tom Warren2011-07-041-0/+1
| | | | Signed-off-by: Tom Warren <twarren@nvidia.com>
* gpio: Add Multi-Function-Pin configuration driver for Marvell SoCsPrafulla Wadaskar2010-12-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the Marvell SoCs has Multi Function Pin (MFP) configuration registers For ex. ARMADA100. These registers are programmed to expose the specific functionality associated with respective SoC Pins This driver provides configuration APIs, using them, configuration need to be done in board specific code for ex- following code configures MFPs 107 and 108 for UART_TX/RX functionality int board_early_init_f(void) { u32 mfp_cfg[] = { /* Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, MFP_EOC /*End of configureation*/ }; /* configure MFP's */ mfp_config(mfp_cfg); return 0; } Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Switch from archive libraries to partial linkingSebastien Carlier2010-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols". This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired. The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts. This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
* Use common function to set GPIOs for MX3 and MX5Stefano Babic2010-09-291-1/+1
| | | | | | | | | The patch adds support for setting gpios to the MX51 processor and change name to the corresponding functions for MX31. In this way, it is possible to get rid of nasty #ifdef switches related to the processor type. Signed-off-by: Stefano Babic <sbabic@denx.de>
* ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5PMinkyu Kang2010-08-261-1/+1
| | | | | | | Use the same configuration around S5P SoCs. (s5pc100, s5pc110, s5pc210 and so on) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SAMSUNG: make s5p common gpio functionsMinkyu Kang2010-04-301-0/+1
| | | | | | | | Because of s5pc1xx gpio is same as s5p seires SoC, move gpio functions to drvier/gpio/ and modify structure's name from s5pc1xx_ to s5p_. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* add a new AT91 GPIO driverJens Scharsig2010-02-121-0/+1
| | | | | | | | | * add a real AT91 GPIO driver instead of header inline code * resolve the mixing of port and pins * change board config files to use new driver * add macros to gpio to realize backward compatibility Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
* Kirkwood: add Marvell Kirkwood gpio driverDieter Kiermaier2009-07-231-0/+1
| | | | | | Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de>
* i.MX31: add a simple gpio driverGuennadi Liakhovetski2009-02-241-1/+2
| | | | | | | | This is a minimal driver, so far only managing output. It will be used by the mxc_spi.c driver. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
OpenPOWER on IntegriCloud