summaryrefslogtreecommitdiffstats
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
...
| * ARM: zynq: Remove PHYLIB from config to defconfigMichal Simek2015-12-0710-0/+10
| | | | | | | | | | | | | | Move PHYLIB from board config to defconfig Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | arm: socfpga: Enable CONFIG_DM_MMCMarek Vasut2015-12-077-0/+7
| | | | | | | | | | | | | | | | | | | | | | Enable driver model MMC support on SoCFPGA. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
* | arm: socfpga: Add SoCFPGA SR1500 boardStefan Roese2015-12-071-0/+18
|/ | | | | | | | | | | | | | | The SR1500 board is a CycloneV based board, similar to the EBV SoCrates, equipped with the following devices: - SPI NOR - eMMC - Ethernet Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: Pavel Machek <pavel@denx.de>
* tegra: Remove merge markers in some Kconfig filesSimon Glass2015-12-054-12/+0
| | | | | | | | | | | | These were added by mistake in commit fde7e189. They cause a warning when configuring the boards. Remove them. Fixes: fde7e18938d8 ("dm: tegra: pci: Move CONFIG_PCI_TEGRA to Kconfig") Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Reported-by: Kevin Hilman <khilman@linaro.org> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* defconfig: dra74_evm: enable serial driver modelMugunthan V N2015-12-051-0/+1
| | | | | | | | Enable serial driver model for dra74_evm as ns16550 supports driver model. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-12-041-2/+3
|\
| * cgtqmx6eval: Add DFU supportOtavio Salvador2015-11-251-0/+12
| | | | | | | | | | | | | | Add MMC and SPI DFU support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * cgtqmx6eval: Add SPL supportOtavio Salvador2015-11-251-11/+0
| | | | | | | | | | | | | | | | | | Congatec has several MX6 boards based on quad, dual, dual-lite and solo. Add SPL support so that all the variants can be supported Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | iocon: Disable FIT_VERBOSETom Rini2015-12-011-0/+1
| | | | | | | | | | | | In order to fit into image constraints again, remove this feature. Signed-off-by: Tom Rini <trini@konsulko.com>
* | rockchip: Explicitly set CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LENSjoerd Simons2015-12-012-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that u-boot relocates the malloc area in SPL to SDRAM, with the malloc area sitting below the SPL_STACK_R_ADDR the SPL_STACK_R_MALLOC_SIMPLE_LEN needs to be set explicitly for rockchip as its SPL_STACK_R_ADDR (512kb) is smaller then STACK_R_MALLOC_SIMPLE_LEN (1Mb). Using the same value as SYS_MALLOC_F_LEN (8kb) is enough to load u-boot from SD card. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: Add basic support for evb-rk3036 boardhuang lin2015-12-011-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc) Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Moved board Kconfig fragment from previous patch into this one to fix build error: Signed-off-by: Simon Glass <sjg@chromium.org> Series-changes: 8 - moved board Kconfig fragment from previous patch into this one
* | dm: core: Add SPL Kconfig for REGMAP and SYSCONhuang lin2015-12-013-0/+6
| | | | | | | | | | | | | | | | Add SPL Kconfig for REGMAP and SYSCON, so REGMAP and SYSCON can remove from SPL stage. Signed-off-by: Lin Huang <hl@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dm: pci: Disable PCI compatibility functions by defaultSimon Glass2015-12-011-0/+1
| | | | | | | | | | | | | | | | | | We eventually need to drop the compatibility functions for driver model. As a first step, create a configuration option to enable them and hide them when the option is disabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | dm: tegra: pci: Move CONFIG_PCI_TEGRA to KconfigSimon Glass2015-12-016-0/+18
| | | | | | | | | | | | | | Move this option to Kconfig and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* | x86: tsc: Remove legacy timer codesBin Meng2015-12-012-2/+0
| | | | | | | | | | | | | | | | | | | | | | Now that we have converted all x86 boards to use driver model timer, remove these legacy timer codes in the tsc driver. Note this also removes the TSC_CALIBRATION_BYPASS Kconfig option, as it is not needed with driver model. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Convert to use driver model timerBin Meng2015-12-019-0/+10
| | | | | | | | | | | | | | Convert all x86 boards to use driver model tsc timer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2015-11-302-0/+22
|\ \
| * | arm: atmel: Add SAMA5D2 Xplained boardWenyou Yang2015-11-302-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [fix checkpatch warnings] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-11-3019-14/+127
|\ \ \
| * | | armv8/ls1043ardb: add DSPI supportGong Qianyu2015-11-303-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the U-Boot Driver Model. Just enable Freescale DSPI driver and set DSPI related parameters in dts file. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls1043aqds: dts: add dtb supportGong Qianyu2015-11-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse the dts files from ls1043a linux kernel. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls1043aqds: add LS1043AQDS board supportShaohui Xie2015-11-304-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1043AQDS Specification: ------------------------- Memory subsystem: * 2GByte DDR4 DIMM * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two RGMII ports * XFI 10G port * SGMII * QSGMII with 4x 1G ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> [York Sun: Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8/ls1043ardb: dts: add dtb supportGong Qianyu2015-11-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse dts files from ls1043a linux kernel. Some parts in dts files may not be needed by U-Boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-3012-6/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
| * | | armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-306-8/+8
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
* | | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-11-301-1/+2
|\ \ \
| * | | arm: socfpga: Repair SoCrates boardMarek Vasut2015-11-301-1/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board was constantly parasiting on the CV SoCDK, so split it into it's own separate directory. Moreover, the board config was missing important bits, like simple-bus support in SPL, the DRAM configuration was incorrect and the DTS was also missing the pre reloc bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: Jan Viktorin <viktorin@rehivetech.com>
* | | arm: kirkwood: add ZyXEL NSA310S deviceGerald Kerma2015-11-291-0/+13
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add ZyXEL NSA310S 1-Bay Media Server The ZyXEL NSA310S device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1000Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 4 Status LED (green) - 1 Copy/Sync button - 1 Reset button - 1 SATA II port - 2 USB 2.0 ports (front and back) - Smart fan Signed-off-by: Gerald Kerma <dreagle@doukki.net> Signed-off-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
* | arm: spear: x600: Enable tiny-printfStefan Roese2015-11-251-0/+1
| | | | | | | | | | | | | | | | Enabling the new tiny-printf function makes the SPL image fit again in the 8KiB restricted area. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com>
* | sf: Move SPI flash drivers to defconfigBin Meng2015-11-25417-0/+556
| | | | | | | | | | | | | | | | There are already Kconfig options for SPI flash drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | spi: Move SPI drivers to defconfigBin Meng2015-11-25273-5/+278
| | | | | | | | | | | | | | | | There are already Kconfig options for SPI drivers, but we have not moved them from config.h to defconfig files. This commit does this in a batch. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* | sunxi: Update new defconfigsTom Rini2015-11-223-0/+3
| | | | | | | | | | | | | | After introduction of CONFIG_SYS_NS16550 these defconfig files were added and need to be updated. Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-11-223-0/+46
|\ \
| * | sunxi: Add support for the Lamobo R1 boardJelle de Jong2015-11-221-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such on the PCB, is meant as a A20 based router board. As such the board comes with a built-in switch chip giving it 5 gigabit ethernet ports, and it has a large empty area on the pcb with mounting holes which will fit a 2.5 inch harddisk. To complete its networking features it has a Realtek RTL8192CU for WiFi 802.11 b/g/n. The dts file is identical to the one submitted upstream. Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Add support for Orangepi Plus and Orangepi PC boardsHans de Goede2015-11-222-0/+30
| |/ | | | | | | | | | | Add defconfig files for the Orangepi Plus and Orangepi PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | vexpress64: store env in flashRyan Harkin2015-11-212-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for storing the environment in CFI NOR flash on Juno and FVP models. I also removed some config values that are not used by CFI flash parts. Juno has 1 flash part with 259 sectors. The first 255 sectors are 0x40000 (256kb) and are followed by 4 sectors of 0x10000 (64KB). FVP models simulate a 64MB NOR flash part at base address 0x0FFC0000. This part has 256 x 256kb sectors. We use the last sector to store the environment. To save the NOR flash to a file, the following parameters should be passed to the model: -C bp.flashloader1.fname=${FILENAME} -C bp.flashloader1.fnameWrite=${FILENAME} Foundation models don't simulate the NOR flash, but having NOR support in the u-boot binary does not harm: attempting to write to the NOR will fail gracefully. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | nios2: 10m50: change to ns16550 uartThomas Chou2015-11-211-1/+1
| | | | | | | | | | | | | | | | | | Change to ns16550 uart for 10m50 devboard based on a new Altera release. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
* | ns16550: move CONFIG_SYS_NS16550 to KconfigThomas Chou2015-11-21640-28/+662
| | | | | | | | | | | | Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | ns16550: zap CONFIG_NS16550_SERIALThomas Chou2015-11-211-1/+0
| | | | | | | | | | | | | | | | | | Zap CONFIG_NS16550_SERIAL, as the unification of ns16550 drivers is completed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | ns16550: unify serial_x86Thomas Chou2015-11-201-1/+1
|/ | | | | | | | | Unify serial_x86, and use the generic binding. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: Enable USB keyboardSimon Glass2015-11-191-0/+2
| | | | | | | Enable the USB keyboard on sandbox, now that we have a suitable emulation driver. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Enable console recording and silent consoleSimon Glass2015-11-191-0/+3
| | | | | | | Allow console recording so that tests can use it. Also allow the console output to be suppressed, to reduce test output 'noise'. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: add a sandbox timer and basic testThomas Chou2015-11-191-0/+2
| | | | | | | | Add a sandbox timer which get time from host os and a basic test. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* rockchip: Turn on CONFIG_DEBUG_UART_NS16550 in defconfigsAriel D'Alessandro2015-11-192-0/+2
| | | | | | | | | | No UART driver was specified in defconfig, thus DEBUG_UART_ALTERA_JTAGUART was incorrectly selected by default since commit 220e8021af96741bd7149ca9895e1f0c8a38d0bb added a new Altera UART driver. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Simon Glass <sjg@chromium.org>
* powerpc/83xx: add support for kmtegr1 boardValentin Longchamp2015-11-181-0/+4
| | | | | | | | | This board uses the same CPU (8309) as VECT1. The memory however is different since it has NAND Flash, the NOR Flash partitioning is different and of course the FPGAs as well. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com>
* powerpc/83xx: add support for kmtepr2 boardChristoph Dietrich2015-11-181-0/+4
| | | | | | | | This board is similar to TUXX1, but it has differend FPGAs. Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com> Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* common: add CMD_GPIO to KconfigThomas Chou2015-11-18323-110/+382
| | | | | | | Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* board: ti: beagle_x15: Rename to indicate support for TI am57xx evmsKipisz, Steven2015-11-181-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge git://git.denx.de/u-boot-marvellTom Rini2015-11-174-0/+20
|\
| * arm: kirkwood: ib62x0: make use of defconfigLuka Perkov2015-11-171-0/+5
| | | | | | | | Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
OpenPOWER on IntegriCloud