summaryrefslogtreecommitdiffstats
path: root/common
Commit message (Collapse)AuthorAgeFilesLines
* cmd_part: don't print cmd name twice in helpStephen Warren2013-03-111-1/+1
| | | | | | | | | | | | | | | | The core implementation of "help" already prints the command name before the help text of a specific command. Remove it from part's own help text to avoid it being printed twice: Tegra114 (Dalmore) # help part part - disk partition related commands Usage: part part uuid <interface> <dev>:<part> - print partition UUID ... Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Feature Removal: disable "mtest" command by defaultWolfgang Denk2013-03-111-1/+4
| | | | | | | | | | | | | | | | | | | | | The "mtest" command is of little practical use (if any), and experience has shown that a large number of board configurations define useless or even dangerous start and end addresses. If not even the board maintainers are able to figure out which memory range can be reliably tested, how can we expect such from the end users? As this problem comes up repeatedly, we rather do not enable this command by default, so only people who know what they are doing will be confronted with it. As this changes the user interface, we allow for a grace period before this change takes effect. For now, we make "mtest" configurable through the CONFIG_CMD_MEMTEST variable, which is defined in include/config_cmd_default.h; we also add an entry to doc/feature-removal-schedule.txt which announces the removal of this default setting in two releases from now, i. e. with v2013.07. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Tom Rini <trini@ti.com>
* bootm: fix conditional compilation for bootm ramdisk subcommandDaniel Schwierzeck2013-03-041-1/+1
| | | | | | | | | All code related to the bootm ramdisk subcommand is conditionally enabled by CONFIG_SYS_BOOT_RAMDISK_HIGH except for the help message. Replace the CONFIG_ARCH defines by CONFIG_SYS_BOOT_RAMDISK_HIGH to fix this. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* env: Avoid clobbering an edited variable on ctrl-cJoe Hershberger2013-03-041-1/+2
| | | | | | If readline says there was an error, don't write to the variable! Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* sandbox: Add 'sb' command to access filesystem featuresSimon Glass2013-03-042-0/+64
| | | | | | | | | The new 'sb' command is intended to deal with sandbox-specific features that have no parallel in other archs. This commit adds two sub-commands to list a directory and read a file from the host filesystem. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'mem' of git://git.denx.de/u-boot-x86Tom Rini2013-03-0421-553/+612
|\
| * hash: Use lower case for hash algorithm namesSimon Glass2013-02-282-5/+10
| | | | | | | | | | | | | | | | | | | | Rather than use strcasecmp() in the hash algorithm search, require the caller to do this first. Most of U-Boot can use lower case anyway, and the hash command can convert to lower case before calling hash_command(). This saves needing strcasecmp() for boards that use hashing but not the hash command. Signed-off-by: Simon Glass <sjg@chromium.org>
| * sandbox: Allow hash functions to work correctlySimon Glass2013-02-281-8/+16
| | | | | | | | | | | | Use map_sysmem() so that hashing is possible on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
| * sandbox: Update mtest to fix crashesSimon Glass2013-02-281-45/+63
| | | | | | | | | | | | | | Use map_sysmem() in the memory tester so that it works as expected on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Move CONFIG_SYS_MEMTEST_SCRATCH #ifdef to top of fileSimon Glass2013-02-281-4/+4
| | | | | | | | | | | | | | This config effectively has a default value of 0, so add this setting at the top of the code to remove an #ifdef in the C function. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Roll crc32 into hash infrastructureSimon Glass2013-02-282-106/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the CRC32 algorithm to the list of available hashes, and make the crc32 command use hash_command(). Add a new crc32_wd_buf() to make this possible, which puts its result in a buffer rather than returning it as a 32-bit value. Note: For some boards the hash command is not enabled, neither are sha1, sha256 or the verify option. In this case the full hash implementation adds about 500 bytes of overhead. So as a special case, we use #ifdef to select very simple bahaviour in that case. The justification for this is that it is currently a very common case (virtually all boards enable crc32 but only some enable more advanced features). Signed-off-by: Simon Glass <sjg@chromium.org>
| * hash: Add a flag to support saving hashes in the environmentSimon Glass2013-02-283-24/+59
| | | | | | | | | | | | | | | | | | Some hashing commands permit saving the hash in an environment variable, and verifying a hash from there. But the crc32 command does not support this. In order to permit crc32 to use the generic hashing infrastructure, add a flag to select which behaviour to use. Signed-off-by: Simon Glass <sjg@chromium.org>
| * image: Use crc header file instead of C prototypesSimon Glass2013-02-281-2/+2
| | | | | | | | | | | | We have an existing header which the crc32 definitions, so use it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * common: Use new numeric setenv functionsSimon Glass2013-02-2815-71/+48
| | | | | | | | | | | | Use setenv_ulong(), setenv_hex() and setenv_addr() in common/ Signed-off-by: Simon Glass <sjg@chromium.org>
| * Update set_working_fdt_addr() to use setenv_addr()Simon Glass2013-02-282-13/+6
| | | | | | | | | | | | | | We might as well use this common function instead of repeating the same code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Reduce casting in mtestSimon Glass2013-02-281-12/+18
| | | | | | | | | | | | | | | | Use a ulong for the command arguments, and only cast to an address when needed. This fixes warnings in sandbox where pointers are typically 64 bits long. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Bring mtest putc() into common codeSimon Glass2013-02-281-23/+9
| | | | | | | | | | | | | | If we get a Ctrl-C abort, we always print a newline. Move this repeated code out of the functions and into a single place in the caller. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Fix mtest indentingSimon Glass2013-02-281-161/+161
| | | | | | | | | | | | Some of the inner loops are not indented correctly. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Use common mtest iteration countingSimon Glass2013-02-281-64/+59
| | | | | | | | | | | | | | The iteration code is the same for each version of the memory test, so pull it out into the common function. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Split out the memory tests into separate functionsSimon Glass2013-02-281-101/+116
| | | | | | | | | | | | | | | | Half of the code is currently hidden behind an #ifdef. Move the two memory tests into their own functions and use the compiler to eliminate the unused code. Signed-off-by: Simon Glass <sjg@chromium.org>
| * sandbox: Change memory commands to use map_physmemSimon Glass2013-02-281-43/+79
| | | | | | | | | | | | | | Sandbox wants to support commands which use memory. The map_sysmen() call provides this feature, so use this in the memory commands. Signed-off-by: Simon Glass <sjg@chromium.org>
| * Tidy up error checking and fix bug in hash commandSimon Glass2013-02-281-0/+4
| | | | | | | | | | | | | | | | | | There are two problems: 1. The argument count needs to be checked before argv is used 2. When verify is not enabled, we need to define a constant zero value Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2013-03-041-1/+18
|\ \
| * | blackfin: bf60x: Port blackfin core architecture code to boot on bf60x.Sonic Zhang2013-03-041-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Set up clocks, DDR controller, Nor flash controller, reboot, serial port. Add new SPI boot modes. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>
* | | SPL: Change description for spl commandStefano Babic2013-03-011-4/+8
| |/ |/| | | | | | | | | | | | | Add a more descriptive text to the help of the spl command. Signed-off-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* | common/env_nand.c: calculate crc only when readenv was OKPhil Sutter2013-02-221-2/+4
| | | | | | | | | | | | | | | | Calculating the checksum of incompletely read data is useless. Signed-off-by: Phil Sutter <phil.sutter@viprinet.com> [scottwood@freescale.com: minor formatting fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
* | env_nand.c: clarify log messages when env reading failsPhil Sutter2013-02-221-4/+8
| | | | | | | | | | | | | | | | | | The single message is misleading, since there is no equivalent success note when reading the other copy succeeds. Instead, warn if one of the redundant copies could not be loaded and emphasise on the error when reading both fails. Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
* | nand: fix nand read.option parsingHarvey Chapman2013-02-221-1/+1
| | | | | | | | | | | | | | "nand read.part addr off size" would be treated as "nand read.raw addr off 1" It now fails as intended stating "Unknown nand command suffix '.part'" Signed-off-by: Harvey Chapman <hchapman@3gfp.com>
* | imls: Add support to list images in NAND deviceVipin Kumar2013-02-221-3/+164
|/ | | | | | This patch adds support to list images in NAND flash through imls Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
* gpt: fix partion size limitPiotr Wilczek2013-02-201-4/+6
| | | | | | | | | | | | Currently, in gpt command, partion size is converted from string to unsigned long type using 'ustrtol' function. That type limits the partition size to 4GB. This patch changes the conversion function to 'ustrtoll' to return unsigned long long type. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* led: The gpio_led.c code expects that LED state is from the enumHolger Hans Peter Freyther2013-02-201-2/+2
| | | | | | | | u-boot is not consistent if state should be 0|1 or of the enum, the GPIO driver expects this to be one of the enum values. Update the caller. Signed-off-by: Holger Hans Peter Freyther <holger@freyther.de>
* cmd_elf: Fix broken bootvx commandReinhard Arlt2013-02-201-1/+1
| | | | | | Fix broken bootvx command. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu>
* cmd_load.c: Add #endif comments to reduce confusionRobert P. J. Day2013-02-191-4/+4
| | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* cmd_mem.c: Fix some typoes, no functional changesRobert P. J. Day2013-02-191-4/+6
| | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* malloc: make malloc_bin_reloc staticGabor Juhos2013-02-191-1/+5
| | | | | | | | | | | | | | | | | | | On architectures where manual relocation is needed, the 'malloc_bin_reloc' function must be called after 'mem_malloc_init'. Make the 'malloc_bin_reloc' function static and call it directly from 'mem_malloc_init' instead of calling that from board_init_{r,f} functions of the affected architectures. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Andreas Bießmann <andreas.devel@gmail.com> Cc: Jason Jin <Jason.jin@freescale.com> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* common/fdt_support.c: sparse fixesKim Phillips2013-02-071-39/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial: fdt_support.c:89:64: warning: Using plain integer as NULL pointer fdt_support.c:325:65: warning: Using plain integer as NULL pointer fdt_support.c:352:65: warning: Using plain integer as NULL pointer For the following bad constant expression, We hardcode the max. number of memory banks to four for the foreseeable future, and add an error with instructions on what to do once it's exceeded: fdt_support.c:397:22: error: bad constant expression For the rest below, sparse found a couple of wrong endian conversions in of_bus_default_translate() and fdt_get_base_address(), but otherwise the rest is mostly annotation fixes: fdt_support.c:64:24: warning: cast to restricted __be32 fdt_support.c:192:21: warning: incorrect type in assignment (different base types) fdt_support.c:192:21: expected unsigned int [unsigned] [usertype] tmp fdt_support.c:192:21: got restricted __be32 [usertype] <noident> fdt_support.c:201:21: warning: incorrect type in assignment (different base types) fdt_support.c:201:21: expected unsigned int [unsigned] [addressable] [usertype] tmp fdt_support.c:201:21: got restricted __be32 [usertype] <noident> fdt_support.c:304:13: warning: incorrect type in assignment (different base types) fdt_support.c:304:13: expected unsigned int [unsigned] [usertype] val fdt_support.c:304:13: got restricted __be32 [usertype] <noident> fdt_support.c:333:13: warning: incorrect type in assignment (different base types) fdt_support.c:333:13: expected unsigned int [unsigned] [usertype] val fdt_support.c:333:13: got restricted __be32 [usertype] <noident> fdt_support.c:359:13: warning: incorrect type in assignment (different base types) fdt_support.c:359:13: expected unsigned int [unsigned] [usertype] val fdt_support.c:359:13: got restricted __be32 [usertype] <noident> fdt_support.c:373:21: warning: cast to restricted __be32 fdt_support.c:963:48: warning: incorrect type in argument 1 (different base types) fdt_support.c:963:48: expected restricted __be32 const [usertype] *p fdt_support.c:963:48: got unsigned int [usertype] *<noident> fdt_support.c:971:48: warning: incorrect type in argument 1 (different base types) fdt_support.c:971:48: expected restricted __be32 const [usertype] *p fdt_support.c:971:48: got unsigned int [usertype] *<noident> fdt_support.c:984:29: warning: incorrect type in argument 1 (different base types) fdt_support.c:984:29: expected restricted __be32 const [usertype] *cell fdt_support.c:984:29: got unsigned int [usertype] *addr fdt_support.c:996:32: warning: incorrect type in argument 1 (different base types) fdt_support.c:996:32: expected restricted __be32 const [usertype] *cell fdt_support.c:996:32: got unsigned int [usertype] *addr fdt_support.c:1041:41: warning: incorrect type in argument 1 (different base types) fdt_support.c:1041:41: expected restricted __be32 const [usertype] *cell fdt_support.c:1041:41: got unsigned int [usertype] *addr fdt_support.c:1053:41: warning: incorrect type in argument 2 (different base types) fdt_support.c:1053:41: expected restricted __be32 const [usertype] *range fdt_support.c:1053:41: got unsigned int const [usertype] *[assigned] ranges fdt_support.c:1064:53: warning: incorrect type in argument 2 (different base types) fdt_support.c:1064:53: expected restricted __be32 const [usertype] *addr fdt_support.c:1064:53: got unsigned int [usertype] *addr fdt_support.c:1110:50: warning: incorrect type in argument 2 (different base types) fdt_support.c:1110:50: expected restricted __be32 const [usertype] *addr fdt_support.c:1110:50: got unsigned int *<noident> fdt_support.c:1121:49: warning: incorrect type in argument 1 (different base types) fdt_support.c:1121:49: expected restricted __be32 const [usertype] *cell fdt_support.c:1121:49: got unsigned int *<noident> fdt_support.c:1147:60: warning: incorrect type in argument 2 (different base types) fdt_support.c:1147:60: expected restricted __be32 const [usertype] *addr fdt_support.c:1147:60: got unsigned int *<noident> fdt_support.c:1081:5: warning: symbol '__of_translate_address' was not declared. Should it be static? fdt_support.c:1154:5: error: symbol 'fdt_translate_address' redeclared with different type (originally declared at include/fdt_support.h:95) - incompatible argument 3 (different base types) fdt_support.c: In function 'fdt_node_offset_by_compat_reg': fdt_support.c:1173:17: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] See also linux kernel commit 0131d897 "of/address: use proper endianess in get_flags". Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Jerry Van Baren <gvb.uboot@gmail.com>
* treewide: include libfdt_env.h before fdt.hKim Phillips2013-02-074-4/+0
| | | | | | | | | | | and, if including libfdt.h which includes libfdt_env.h in the correct order, don't include fdt.h before libfdt.h. this is needed to get the fdt type definitions set from the project environment before fdt.h uses them. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Jerry Van Baren <gvb.uboot@gmail.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2013-02-041-5/+22
|\
| * common: cmd_bdinfo: Fix compilation warning for microblazeMichal Simek2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix one printf compilation warning in microblaze bdinfo part. Warning log: cmd_bdinfo.c: In function 'do_bdinfo': cmd_bdinfo.c:219:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * common: cmd_bdinfo: Fix bdinfo to show all MACs for Microblaze and ARMMichal Simek2013-02-041-4/+21
| | | | | | | | | | | | | | - Show all ethernet MACs in the system. - Show current ethernet device Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI optionMichal Simek2013-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ARM_DCC_MULTI should be also removed in the patch "serial: Remove CONFIG_SERIAL_MULTI from serial drivers" (sha1: a3827250606895ec2dd4b8d867342b7cabf3692f) Because the driver defines serial_* functions which cause conflict with serial.c (multiple definition of serial_*) Removing CONFIG_SERIAL_MULTI function also require to define default_serial_console for cases where another serial driver is not available in the system. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Marek Vasut <marex@denx.de>
* | cmd_time: merge run_command_and_time_it with cmd_processRichard Genoud2013-02-044-34/+9
| | | | | | | | | | | | | | | | | | | | As far as every arch has a get_timer function, run_command_and_time_it code can now disappear. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-By: Che-Liang Chiou <clchiou@chromium.org> [trini: s/ulong/unsigned long/ in command.h portion] Signed-off-by: Tom Rini <trini@ti.com>
* | console: USB: KBD: Fix incorrect autoboot timeoutJim Lin2013-02-041-5/+5
| | | | | | | | | | | | | | | | | | Autoboot timeout defined by CONFIG_BOOTDELAY will not be accurate if CONFIG_USB_KEYBOARD and CONFIG_SYS_USB_EVENT_POLL are defined in configuration file and when tstc() function for checking key pressed takes longer time than 10 ms (e.g., 50 ms) to finish. Signed-off-by: Jim Lin <jilin@nvidia.com>
* | common: env_mmc: Use __weak annotation to simplify codeFabio Estevam2013-02-041-3/+1
| | | | | | | | | | | | | | Using the __weak annotation can make the code cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* | common/cmd_bootm.c: prevent running of subcommands before 'bootm start'Gabor Juhos2013-02-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The execution order of the bootm subcommands is fixed. Although here is a sanity check in the state machine which should prevent running the subcommands in wrong order but it does not catch all possible errors. It is possible to run any subcommand without running 'bootm start' first which leads to unexpected behaviour. For example, running 'bootm loados' without 'bootm start' causes a hang: U-Boot> bootm loados XIP Invalid Image ... OK OK Add a sanity check to 'do_bootm_subcommand' in order to ensure that no subcommands can be executed before 'bootm start'. After the patch running of any subcommand without running 'bootm start' will cause an error like this: U-Boot> bootm loados Trying to execute a command out of order bootm - boot application image from memory Usage: bootm [addr [arg ...]] - boot application image stored in memory ... Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
* | Only use fb_base if we have a displaySimon Glass2013-02-041-0/+4
| | | | | | | | | | | | | | | | The ideal of having a frame buffer when there isn't a display is not that useful. Change the bdinfo command to expect this only when we have an lcd or video display. Signed-off-by: Simon Glass <sjg@chromium.org>
* | ppc: Move brg_clk to arch_global_dataSimon Glass2013-02-011-1/+1
| | | | | | | | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Move tlb_addr and tlb_size to arch_global_dataSimon Glass2013-02-011-1/+1
|/ | | | | | | | Move these fields into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Address tlb_size in this patch as well] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2013-01-141-1/+1
|\
| * lcd: restore ability to display 8 bpp BMPs on 16 bpp LCDsNikita Kiryanov2013-01-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fb6a9aab7ae78c (LCD: display 32bpp decompressed bitmap image) broke the check that allowed U-Boot to display 8 bpp BMPs on a 16 bpp LCD screen, effectively turning this feature off. Restore this feature by changing the check back to the same meaning it originally had. To avoid future confusion, the check has also been rephrased to make its meaning clear. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
OpenPOWER on IntegriCloud