summaryrefslogtreecommitdiffstats
path: root/board/freescale
Commit message (Collapse)AuthorAgeFilesLines
...
| | * mx6: titanium: Move BSP code to barco board directoryStefan Roese2013-11-133-499/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the titanium board is not a Freescale board, move its BSP code from the freescale board directory to the newly created barco board directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
| | * titanium: Return the error when cpu_eth_init() failsFabio Estevam2013-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | When cpu_eth_init() fails we should not return success. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
* | | board/t1040qds: Enable memory reset controlPrabhakar Kushwaha2014-01-021-0/+5
| | | | | | | | | | | | | | | | | | | | | Define QIXIS_RST_FORCE_MEM to reset on-board DDR-DIMM before start accessing it. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* | | powerpc/b4860/pbl: fix rcw cfgShaohui Xie2014-01-021-1/+1
| | | | | | | | | | | | | | | | | | The BOOT_LOC setting in rcw cfg is wrong, set it to Memory complex 1. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* | | board/freescale:Remove use of CONFIG_SPL_NAND_MINIMALPrabhakar Kushwaha2014-01-023-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary review purpose. So, use CONFIG_SPL_NAND_BOOT config. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* | | board/t1040qds: Fix typo in t1040_pbi.cfg filePrabhakar Kushwaha2014-01-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | T1040QDS has 256KB SRAM. Comment is showing wrong information. So update the comment. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* | | Makefile: delete unnecessary CPPFLAGS settingsMasahiro Yamada2013-12-131-2/+0
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | powerpc/p1_p2_rdb_pc: Fix warnings for __iomem pointersClaudiu Manoil2013-12-111-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the __iomem address space marker for the tsec pointers to struct tsec_mii_mng memory mapped register regions. This solves the sparse warnings for mixig normal pointers with __iomem pointers for tsec. p1_p2_rdb_pc.c:373:24: warning: incorrect type in assignment (different address spaces) p1_p2_rdb_pc.c:373:24: expected struct tsec_mii_mng [noderef] <asn:2>*regs p1_p2_rdb_pc.c:373:24: got struct tsec_mii_mng *<noident> Use TSEC_GET_MDIO_REGS_BASE() for the remaining mdio 'regs' initializations to remove the __iomem warnings and for consistency. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-12-101-9/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: board/samsung/trats2/trats2.c include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * \ Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-1098-175/+2418
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds
| * | | arm: keep all sections in ELF fileAlbert ARIBAUD2013-12-071-9/+9
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Current LDS files /DISCARD/ a lot of sections when linking ELF files, causing diagnostic tools such as readelf or objdump to produce partial output. Keep all section at link stage, filter only at objcopy time so that .bin remains minimal. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROMPo Liu2013-12-041-0/+13
| |/ |/| | | | | | | | | | | | | | | | | Currently, there is only one EEPROM on c29xpcie board which is AT24C1024. We program the SPD data at beginning of the AT24C1024.But the AT24C1024 has a 16-bit sub-address mode. This patch is tomake it work when getting SPD in a 16-bit sub-address EEPROM. Signed-off-by: Po Liu <Po.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* | t2080qds/ramboot: enable PBL tool for t2080qdsShengzhou Liu2013-11-252-0/+49
| | | | | | | | | | | | | | | | Add the default RCW(SerDes 0x66_0x16) and PBI configure file for T2080QDS board, so we can use PBL tool to generate the ramboot image to support boot from NAND/SPI/SD. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* | powerpc/t2080qds: add support for t2080qds boardShengzhou Liu2013-11-2510-0/+1322
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The T2080QDS is a high-performance computing evaluation, development and test platform supporting the T2080 QorIQ Power Architecture processor. T2080QDS feature overview Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz Memory: - Single memory controller capable of supporting DDR3 and DDR3-LV devices - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support Ethernet interfaces: - Two 1Gbps RGMII on-board ports - Four 10Gbps XFI on-board cages - 1Gbps/2.5Gbps SGMII Riser card - 10Gbps XAUI Riser card Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes: - 16 lanes up to 10.3125GHz - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI IFC: - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA eSPI: - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040) USB: - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) PCIE: - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) SATA: - Two SATA 2.0 ports on-board SRIO: - Two Serial RapidIO 2.0 ports up to 5 GHz eSDHC: - Supports SD/SDHC/SDXC/eMMC Card I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports System Logic: - QIXIS-II FPGA system controll Debug Features: - Support Legacy, COP/JTAG, Aurora, Event and EVT Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: removed Makefile blank line at EOF, fix conflicts with moving DDR driver] Acked-by: York Sun <yorksun@freescale.com>
* | Driver/IFC: Move Freescale IFC driver to a common driverYork Sun2013-11-253-3/+3
| | | | | | | | | | | | | | | | Freescale IFC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the driver to driver/misc and fix the header file includes. Signed-off-by: York Sun <yorksun@freescale.com>
* | Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xxYork Sun2013-11-2512-18/+25
| | | | | | | | | | | | | | Fix ccsr_ddr structure to avoid using typedef. Combine DDR2 and DDR3 structure for 83xx, 85xx and 86xx. Signed-off-by: York Sun <yorksun@freescale.com>
* | Driver/DDR: Moving Freescale DDR driver to a common driverYork Sun2013-11-2564-106/+106
| | | | | | | | | | | | | | Freescale DDR driver has been used for mpc83xx, mpc85xx, mpc86xx SoCs. The similar DDR controllers will be used for ARM-based SoCs. Signed-off-by: York Sun <yorksun@freescale.com>
* | Makefile: rename all libraries to built-in.oMasahiro Yamada2013-11-173-10/+10
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | Makefile: specifiy an explicite object name rather than $(BOARD).oMasahiro Yamada2013-11-171-1/+1
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | board: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mkMasahiro Yamada2013-11-174-45/+0
| | | | | | | | | | | | | | Board config.mk do not need to add -DCONFIG_SYS_TEXT_BASE to CPPFLAGS because the top level config.mk does instead. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | powerpc/t104xrdb: Add T1042RDB_PI board supportPriyanka Jain2013-11-131-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1042RDB_PI is Freescale Reference Design Board supporting the T1042 QorIQ Power Architecture™ processor. T1042 is a reduced personality of T1040 SoC without Integrated 8-port Gigabit. The board is designed with low power features targeted for Printing Image Market. T1042RDB_PI is similar to T1040RDB board with few differences like it has video interface, supports T1042 personality T1042RDB_PI board Overview ----------------------- - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration - RegEx Pattern Matching Acceleration - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Two on-board RGMII 10/100/1G ethernet ports. - SERDES Connections, 8 lanes supporting: — PCI — SATA 2.0 - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and Interleaving -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Video - DIU supports video at up to 1280x1024x32bpp - HDMI connector - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Device connected: EEPROM, thermal monitor, VID controller, RTC - Other IO - Two Serial ports - ProfiBus port - Four I2C ports Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
* | powerpc/t104xrdb: Add T1040RDB board supportPriyanka Jain2013-11-139-0/+650
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040RDB is Freescale Reference Design Board supporting the T1040 QorIQ Power Architecture™ processor. T1040RDB board Overview ----------------------- - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration - RegEx Pattern Matching Acceleration - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Integrated 8-port Gigabit Ethernet switch - Four 1 Gbps Ethernet controllers - SERDES Connections, 8 lanes supporting: - PCI - SGMII - QSGMII - SATA 2.0 - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and Interleaving -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> [York Sun: fixed Makefile] Acked-by: York Sun <yorksun@freescale.com>
* | powerpc/p1010rdb: update readme for p1010rdb-pa and p1010rdb-pbShengzhou Liu2013-11-132-2/+190
| | | | | | | | | | | | | | | | | | | | - Remove duplicate doc/README.p1010rdb - Rename README to README.P1010RDB-PA - Add new README.P1010RDB-PB P1010RDB-PB is a variation of previous P1010RDB-PA board. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* | powerpc/t1040: enable PBL tool for T1040Prabhakar Kushwaha2013-11-132-0/+34
|/ | | | | | | | Use a default RCW of protocol 0x66. A PBI configure file which uses CPC as 256KB SRAM. It can be used by PBL tool on T1040 to build a pbl boot image. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* cosmetic: remove empty lines at the top of fileMasahiro Yamada2013-11-081-1/+0
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* freescale: p1_p2_rdb_pc: rename COBJS-y to obj-yMasahiro Yamada2013-11-061-1/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* board: powerpc: convert more makefiles to Kbuild styleTom Rini2013-11-011-31/+5
| | | | | | | | Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Tom Rini <trini@ti.com>
* board: powerpc: convert makefiles to Kbuild styleMasahiro Yamada2013-11-0145-1122/+190
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de>
* board: arm: convert makefiles to Kbuild styleMasahiro Yamada2013-11-0117-354/+25
| | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
* m68k: convert makefiles to Kbuild styleMasahiro Yamada2013-11-0118-378/+18
| | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jason Jin <Jason.jin@freescale.com>
* fsl/mpc85xx: define common serdes_clock_to_string functionValentin Longchamp2013-10-245-74/+0
| | | | | | | | | | | | This allows to share some common code for the boards that use a corenet base SoC. Two different versions of the function are available in fsl_corenet_serdes.c and fsl_corenet2_serdes.c files. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [York Sun: fix t1040qds.c] Acked-by: York Sun <yorksun@freescale.com>
* powerpc/c29xpcie: add DDR ECC on off config settingPo Liu2013-10-241-0/+8
| | | | | | | | | | c29xpcie REV_A board DDR ECC chip has bad impedance in hardware, force that kind of board to be DDR ECC off when booting. Other version board config ECC on/off by hwconfig=fsl_ddr:ecc=on in uboot enviroment. Signed-off-by: Po Liu <Po.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* boards/c29xpcie: Update TLB and LAW size for IFC NAND, CPLDPrabhakar Kushwaha2013-10-162-4/+4
| | | | | | | | NAND,CPLD AMASK register is programmed for 64K size. so Update TLB & LAW size accordingly. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* powerpc/p1010rdb: add p1010rdb-pb support with updating p1010rdb-paShengzhou Liu2013-10-161-6/+170
| | | | | | | | | | | | - Rename old P1010RDB board as P1010RDB-PA. - Add support for new P1010RDB-PB board. - Some optimization. For more details, see board/freescale/p1010rdb/README. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix conflicts in boards.cfg] Acked-by: York Sun <yorksun@freescale.com>
* board/p1010rdb: add pin mux and sdhc support in any bootShengzhou Liu2013-10-163-20/+105
| | | | | | | | | | | | | | | | Since pins multiplexing, SDHC shares signals with IFC, with this patch: To enable SDHC in case of NOR/NAND/SPI boot a) For temporary use case in runtime without reboot system run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC. b) For long-term use case set 'esdhc' in hwconfig and save it. To enable IFC in case of SD boot a) For temporary use case in runtime without reboot system run 'mux ifc' in u-boot to validate IFC with invalidating SDHC. b) For long-term use case set 'ifc' in hwconfig and save it. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/eeprom: update MAX_NUM_PORTS to adapt non-256-bytes EEPROMShengzhou Liu2013-10-161-0/+4
| | | | | | | | | | | | Some boards use System EEPROM with 128-bytes instead of 256-bytes. Since we regard 256-bytes EEPROM as standard EEPROM with default value for MAX_NUM_PORTS. For those non-256-bytes EEPROM, we can redefine MAX_NUM_PORTS in board-specific file to override the default MAX_NUM_PORTS. This patch doesn't impact on previous existing boards. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/p1010rdb: remove unused cpld_showShengzhou Liu2013-10-161-35/+0
| | | | | | Function cpld_show() was for debug and not called, so clean it. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* powerpc/t1040qds: Add T1040QDS boardPrabhakar Kushwaha2013-10-1611-1/+843
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040QDS is a high-performance computing evaluation, development and test platform supporting the T1040 QorIQ Power Architecture™ processor. T1040QDS board Overview ----------------------- - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration - RegEx Pattern Matching Acceleration - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Integrated 8-port Gigabit Ethernet switch - Four 1 Gbps Ethernet controllers - SERDES Connections, 8 lanes supporting: — PCI Express: supporting Gen 1 and Gen 2; — SGMII — QSGMII — SATA 2.0 — Aurora debug with dedicated connectors - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and Interleaving -IFC/Local Bus - NAND flash: 8-bit, async, up to 2GB. - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB - GASIC: Simple (minimal) target within Qixis FPGA - PromJET rapid memory download support - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - QIXIS System Logic FPGA - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - Video - DIU supports video at up to 1280x1024x32bpp - USB - Supports two USB 2.0 ports with integrated PHYs — Two type A ports with 5V@1.5A per port. — Second port can be converted to OTG mini-AB - SDHC - SDHC port connects directly to an adapter card slot, featuring: - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC — Supporting eMMC memory devices - SPI - On-board support of 3 different devices and sizes - Other IO - Two Serial ports - ProfiBus port - Four I2C ports Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: fix conflict in boards.cfg] Acked-by-by: York Sun <yorksun@freescale.com>
* powerpc: Fix CamelCase warnings in DDR related codePriyanka Jain2013-10-1620-173/+173
| | | | | | | | | | | Some DDR related structures present in fsl_ddr_dimm_params.h, fsl_ddr_sdram.h, ddr_spd.h has various parameters with embedded acronyms capitalized that trigger the CamelCase warning in checkpatch.pl Convert those variable names to smallcase naming convention and modify all files which are using these structures with modified structures. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
* powerpc/B4860: enable PBL tool for B4860Shaohui Xie2013-10-162-0/+34
| | | | | | | | Use a default RCW of protocol 0x2A_0x98, and a PBI configure file which uses CPC1 as 512KB SRAM, then PBL tool can be used on B4860 to build a pbl boot image. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* powerpc/t4240: updated rcw_cfg to align with default hardware configurationShaohui Xie2013-10-161-4/+4
| | | | | | | | | Default configuration has been changed, the most important one is DDR ref_clock which is changed from 66.67MHz to 133.33MHz. so the ratio need to change from 24x to 12x to keep the DDR frequency. There are also some other optimise to align with default configuration. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* powerpc: p1_p2_rdb_pc: add TPL for p1_p2_rdb_pc nand bootYing Zhang2013-10-163-79/+27
| | | | | | Enable TPL for p1_p2_rdb_pc nand boot. Signed-off-by: Ying Zhang <b40530@freescale.com>
* powerpc : p1_p2_rdb_pc : Enable p1_p2_rdb_pc to start from eSPI with SPLYing Zhang2013-10-161-0/+9
| | | | | | Enable p1_p2_rdb_pc to start from eSPI with SPL. Signed-off-by: Ying Zhang <b40530@freescale.com>
* powerpc: p1_p2_rdb_pc: Enable p1_p2_rdb_pc to boot from SD Card with SPLYing Zhang2013-10-163-12/+110
| | | | | | Enable p1_p2_rdb_pc to start from eSDHC with SPL. Signed-off-by: Ying Zhang <b40530@freescale.com>
* SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII modeZhao Qiang2013-10-165-0/+91
| | | | | | | | | | | | | | | | | | | | | Fix PHY addresses for QSGMII Riser Card working in SGMII mode on board P3041/P5020/P4080/P5040/B4860. QSGMII Riser Card can work in SGMII mode, but having the different PHY addresses. So the following steps should be done: 1. Confirm whether QSGMII Riser Card is used. 2. If yes, set the proper PHY address. Generally, the function is_qsgmii_riser_card() is for step 1, and set_sgmii_phy() for step 2. However, there are still some special situations, take P5040 and B4860 as examples, the PHY addresses need to be changed when serdes protocol is changed, so it is necessary to confirm the protocol before setting PHY addresses. Signed-off-by: Zhao Qiang <B45475@freescale.com>
* Corenet/p5040/SGMII:fix the problem for SGMII5/6Zhao Qiang2013-10-161-4/+18
| | | | | | | | | | | SGMII5/6 and SGMII7/8 are not on the same slot on P5040 according to the serdes protocol. So it is not proper to organize SGMII5/6 and SGMII7/8 on one bus and SGMII5/6 can't work. So a new bus SUPER_HYDRA_FM3_SGMII_MDIO is added for SGMII5/6 Signed-off-by: Zhao Qiang <B45475@freescale.com>
* powerpc/c29xpcie: modify DDR parameter to make DDR more stablePo Liu2013-10-161-1/+1
| | | | | | | | DDR parameters clk_adjust were changed. This can make the DDR run more stable. The new value were gotten by the DDR testing tool. Signed-off-by: Po Liu <Po.Liu@freescale.com>
* Coding Style cleanup: remove trailing empty linesWolfgang Denk2013-10-141-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup: replace leading SPACEs by TABsWolfgang Denk2013-10-144-10/+10
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
* Coding Style cleanup: remove trailing white spaceWolfgang Denk2013-10-1422-22/+22
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
OpenPOWER on IntegriCloud