summaryrefslogtreecommitdiffstats
path: root/board/freescale
Commit message (Collapse)AuthorAgeFilesLines
* vf610: refactor DDRMC codeAlbert ARIBAUD \\(3ADEV\\)2015-10-021-51/+105
| | | | | | | | The VF610 DDRMC driver code contains settings which are board-specific. Move these out to boards so that new boards can define their own without having to modify the driver. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* imx: mx7dsabresd: drop code for CONFIG_CMD_BMODEPeng Fan2015-09-241-14/+0
| | | | | | | | | We use outer pmic reset and drop internal reset signal, bmode will not work as expected, so drop boot mode code for 7dsabresd board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Adrian Alonso <aalonso@freescale.com>
* imx: boards: Add maintainers infoPeng Fan2015-09-243-0/+5
| | | | | | | Add MAINTAINERS info for mx6slevk_spl, mx6ul_9x9_evk and mx6qpsabreauto. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx7dsabresd: drop SYS_SOC from board KconfigPeng Fan2015-09-201-3/+0
| | | | | | | | We have defined this kconfig entry in arch/arm/cpu/armv7/mx7/Kconfig, no need to redefine it in board Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mx6ul_14x14_evk: Remove get_board_rev()Fabio Estevam2015-09-201-5/+0
| | | | | | | | | | | get_board_rev() is not actually providing the board revision. It just returns the CPU revision instead. As the CPU revision is already printed on boot, there is no reason to have get_board_rev(), so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6ul_14x14_evk: Staticize when possibleFabio Estevam2015-09-201-2/+2
| | | | | | | | Make the internal symbols static when possible. This prevents sparse build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6ul_14x14_evk: Remove dead codeFabio Estevam2015-09-201-43/+0
| | | | | | iox74lv_set() is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx7dsabresd: Remove get_board_rev()Fabio Estevam2015-09-201-5/+0
| | | | | | | | | | | get_board_rev() is not actually providing the board revision. It just returns the CPU revision instead. As the CPU revision is already printed on boot, there is no reason to have get_board_rev(), so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx7dsabresd: Include USB headerFabio Estevam2015-09-201-0/+1
| | | | | | | | Include <usb/ehci-fsl.h> in order to fix the following sparse warning: board/freescale/mx7dsabresd/mx7dsabresd.c:538:5: warning: symbol 'board_ehci_hcd_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx7dsabreasd: Remove dead codeFabio Estevam2015-09-201-38/+0
| | | | | | iox74lv_set() is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx7dsabresd: Staticize when possibleFabio Estevam2015-09-201-4/+4
| | | | | | | | Make the internal symbols static when possible. This prevents sparse build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: mx7dsabresd set wdog SRS bitPeng Fan2015-09-201-1/+9
| | | | | | | | | | | We use trigger pmic reset to reset the board, so set bit SRS to disable internal WDOG_RESET_B_DEB to make reset stable. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6ul_14x14_evk: Add a README fileFabio Estevam2015-09-131-0/+32
| | | | | | Add a README file to help users getting started with the board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: remove SYS_SOC from board KconfigPeng Fan2015-09-136-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Marek Vasut <marex@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* imx: mx6ul: support mx6ul 9x9 evk boardPeng Fan2015-09-132-33/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx7dsabresd: Add support for MX7D SABRESD boardAdrian Alonso2015-09-135-0/+676
| | | | | | | | | | | | * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-023-5/+5
|\
| * powerpc/t1023rdb: change default core frequency to 1200MHzShengzhou Liu2015-09-011-2/+2
| | | | | | | | | | | | | | | | Per new requirement, change default core frequency from previous 1400MHz to 1200MHz to save power. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targetsYork Sun2015-09-012-3/+3
| | | | | | | | | | | | | | Previously the DDR4 targets were named with _D4. Rename them with _DDR4 for easy identification. Signed-off-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-025-3/+280
|\ \
| * | imx: mx6slevk: add SPL supportPeng Fan2015-09-021-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: mx6: ddr init MMDC according to ddr_typePeng Fan2015-09-023-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * | imx: mx6ul_14x14_evk add ENET supportPeng Fan2015-09-021-0/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add enet support for mx6ul_14x14_evk board: 1. add pinmux settings 2. implement board_eth_init 3. implement board_phy_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
| * | imx: clock support enet2 anatop clock supportPeng Fan2015-09-023-3/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm/ls102xa:add hwconfig setting to support disable unused devicesZhuoyu Zhang2015-09-012-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | DEVDISRn registers provides a mechanism for gating clocks of IP blocks that are not used. Here we implement hwconfig option to allow users to disable unused peripherals on the board. For ex. If eSDHC/qDMA/eDMA are unused and with disabled status in dts, User can enable CONFIG_FSL_DEVICE_DISABLE and set "devdis:esdhc,qdma,edma" in hwconfig, thus ESDHC controller & eDMA/qDMA will be clock gated to save more power. Signed-off-by: Zhuoyu Zhang <Zhuoyu.Zhang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085a_emu: Drop DDR3 emulation targetYork Sun2015-09-011-1/+0
| | | | | | | | | | | | | | | | The emulator with DDR3 model was used during model bringup. DDR4 controllers are used with ls2085a. Drop the DDR4 target defconfig and enable DDR4 in ls2085a_emu_defconfig. Signed-off-by: York Sun <yorksun@freescale.com>
* | ls102xa: etsec: Use proper settings for BE BDsClaudiu Manoil2015-09-012-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the DMACTRL[LE] hack with recommended settings for ETSECDMAMCR to get the same end effect - obtaining big-endian buffer descriptors and frame data for eTSEC. The reset / default value for ETSECDMAMCR is preserved, excepting the BD and FR bits which are cleared to enable the BE mode in accordance with the H/W specifications. Fixes: 52d00a8 "ls102xa: etsec: Add etsec support for LS102xA" Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Tested-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8: ls2085qds: Add support of X-QSGMII-16PORT riser cardPrabhakar Kushwaha2015-09-012-11/+536
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The X-QSGMII-16PORT is a 4xQSGMII/8xSGMII riser card with eighth SerDes interfaces implemented in PCIe form factor board. It supports followings - Card can operate with up to 4 QSGMII lane simultaneously - Card can operate with up to 8 SGMII lane simultaneously Add support of X-QSGMII-16PORT riser card. This patch also take care of back-ward compatiblity with old SGMII rise cards used on LS2085QDS Platform. Signed-off-by: King Chung Lo@freescale.com <KingChungLo@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085aqds: enable 32KHz rtc outputPriyanka Jain2015-09-011-0/+2
|/ | | | | Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl: common: pfuze: no use original pfuze code if DM_PMICPeng Fan2015-08-121-0/+2
| | | | | | | | | | | | If enable DM PMIC and REGULATOR, we should not use original power framework. So need to comment out the pfuze code for original power framework, when CONFIG_DM_PMIC_PFUZE100 defined. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv7/ls1021a: allow OCRAM access permission as R/W in SPLAlison Wang2015-08-032-171/+184
| | | | | | | | | On LS1021A Rev2.0, OCRAM's security level needs to be changed to non-secure access for SD boot. This patch will allow OCRAM access permission as R/W in SPL. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv7/ls1021atwr: program the regulator for deep sleepchenhui zhao2015-08-031-0/+34
| | | | | | | | Program the external regulator to switch off voltage in deep sleep. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv7/ls1021atwr: added deep sleep support in ubootTang Yuantian2015-08-031-3/+65
| | | | | | Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-028-8/+856
|\
| * imx: mx6ul_14x14_evk add basic board supportPeng Fan2015-08-024-0/+663
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
| * imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board supportPeng Fan2015-08-022-7/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add DDR script for mx6qpsabreauto board. 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9] and init the enet pll output to 125Mhz. 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN. Build target: mx6qpsabreauto_config Boot Log: U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 34C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: 0 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Note: In this patch, we still add a new config mx6qpsabreauto_config, since SPL is not supported now, and IMX_CONFIG is needed at build time, so add this config. Future, when SPL is converted, this config can be removed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * imx: mx6sabresd/sabreauto runtime setting fdt_filePeng Fan2015-08-022-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | Detect the SOC and board variant at runtime and change the dtb name, but not hardcoding the fdt_file env variable. Take the following patch as a reference. Íd58699b157df75f1aa0b363ea9c21add21a0c "mx6cuboxi: Load the correct 'fdtfile' variable" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6sxsabresd: Use 'int' for return valuesFabio Estevam2015-07-261-1/+2
| | | | | | | | | | | | | | | | | | | | The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should be of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Use 'int' for return valuesFabio Estevam2015-07-261-1/+2
| | | | | | | | | | | | | | | | | | | | The variable 'ret' is used to store the value returned by pfuze_mode_init(), so it should of type 'int' instead of 'unsigned int' in order to correctly handle negative numbers. Fix the variable type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | powerpc/T104xRDB: Remove vbank check redundant codePriyanka Jain2015-07-311-4/+1
| | | | | | | | | | | | | | | | | | sw variable in checkboard function is storing vbank value which can only take 3-bit value. So check of sw value for if greater than 7 is redundant. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t1023rdb: eMMC boot without external SD cardShengzhou Liu2015-07-311-0/+24
| | | | | | | | | | | | | | | | | | eMMC has no CD and WP pins, it needs to add board-specific board_mmc_getcd() and board_mmc_getwp() in SPL to support eMMC boot without external SD card inserted. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t1023rdb: add support for T1023RDB RevCShengzhou Liu2015-07-314-46/+118
| | | | | | | | | | | | | | | | | | | | | | Add support for NOR flash and GPIO/I2C switch control on RevC. - NOR support - bank0/bank4 switch - SD/eMMC switch - board version Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040Aneesh Bansal2015-07-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P5020 and P5040. The Secure boot target has already been added for P3041 by enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM. The targets for P5020 and P5040 are added in the same manner. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-312-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t104x, t102x: Update CPC debug register value in PBI commandsPriyanka Jain2015-07-284-4/+4
| | | | | | | | | | | | | | | | | | Update PBI command in pbi_cfg files to keep register bit to default reset value while configuring CPC as SRAM Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/t4rdb: fix cpld reset altbankShaohui Xie2015-07-281-7/+1
| | | | | | | | | | | | | | | | cpld reset altbank should always reset to bank4 no matter what current bank is. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issueYing Zhang2015-07-281-4/+11
| | | | | | | | | | | | | | | | | | | | | | Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up. In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana2015-07-281-0/+2
| | | | | | | | | | | | | | | | defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | powerpc/T104xD4RDB: Add T104xD4RDB boards supportPriyanka Jain2015-07-2810-6/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. T1040D4RDB is re-designed T1040RDB board with following changes : - Support of DDR4 memory - Support of 0x66 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 - Support of QE-TDM Similarily T1042D4RDB is a Freescale reference board that hosts the T1040 SoC. T1042D4RDB is re-designed T1042RDB board with following changes : - Support of DDR4 memory - Support for 0x86 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 - Support of DIU Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLDHaikun.Wang@freescale.com2015-07-201-20/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | DSPI has pin muxing with SDHC and other IPs, this patch check the value of RCW SPI_PCS_BASE and SPI_BASE_BASE fields, it also check the "hwconfig" variable. If those pins are configured to DSPI and "hwconfig" enable DSPI, set the BRDCFG5 of QIXIS CPLD to configure the routing to on-board SPI memory. Otherwise will configure to SDHC. DSPI is enabled in "hwconfig" by appending "dspi", eg. setenv hwconfig "$hwconfig;dspi" Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
OpenPOWER on IntegriCloud