summaryrefslogtreecommitdiffstats
path: root/board/amcc/yosemite
Commit message (Collapse)AuthorAgeFilesLines
* Fix linker scripts: add NOLOAD atribute to .bss/.sbss sectionsWolfgang Denk2008-01-121-1/+1
| | | | | | | | | | | | | | | | | | | With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: Rework of 4xx serial driver (2)Stefan Roese2007-10-311-13/+0
| | | | | | | | | | Change all linker scripts to reference the changed driver name 4xx_uart.o. Note: In most cased all these explicit referencing of these object files in the linker scripts is not neccessary. Only for manually embedded environment into the U-Boot image, which is not done is most cases. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-151-2/+5
| | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese2007-06-251-2/+2
| | | | | | | | This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Merge Yosemite & Yellowstone board portsStefan Roese2007-01-301-0/+8
| | | | | | | | | Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) share one config file and all board specific files. This way we don't have to maintain two different sets of files for nearly identical boards. Signed-off-by: Stefan Roese <sr@denx.de>
* [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speedStefan Roese2007-01-131-18/+7
| | | | | | | | | | Now the board revision and the current PCI bus speed are printed after the board message. Also the EBC initialising is now done via defines in the board config file. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with /home/stefan/git/u-boot/denxStefan Roese2006-11-101-1/+1
|\
| * Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk2006-10-091-1/+1
| | | | | | | | Based on patch by Mike Frysinger, 20 Jun 2006
* | Add CONFIG_BOARD_RESET to configure board specific reset functionStefan Roese2006-10-071-0/+6
|/ | | | Patch by Stefan Roese, 07 Oct 2006
* Add support for a saving build objects in a separate directory.Marian Balakowicz2006-09-011-6/+10
| | | | | | | | | | | | | | | | | | | | | Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performanceStefan Roese2006-07-281-2/+2
| | | | | | | AMCC suggested to set the PMU bit to 0 for best performace on the PPC440 DDR controller. Please see doc/README.440-DDR-performance for details. Patch by Stefan Roese, 28 Jul 2006
* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstoneWolfgang Denk2006-05-301-2/+2
| | | | Patch by Stefan Roese, 29 May 2006
* GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk2006-03-311-1/+2
|
* Changes to Yellowstone & Yosemite 440EP/GR eval boards:Stefan Roese2005-12-151-7/+86
| | | | | | | | - Changed GPIO setup to enable another address line in order to address 64M of FLASH. - Added function sdram_tr1_set to auto calculate the tr1 value for the DDR. Patch by Steven Blakeslee, 12 Dec 2005
* (no commit message)Wolfgang Denk2005-12-121-0/+1
|
* Minor AMCC 4xx board cleanupsStefan Roese2005-11-291-12/+0
| | | | Patch by Stefan Roese, 27 Nov 2005
* Changed PPC44x startup message (cpu info, speed...) to common style:Stefan Roese2005-11-271-11/+1
| | | | | | | | | | | On PPC44x platforms, the startup message generated in "cpu.c" only comprised the ppc type and revision but not additional informations like speed etc. Those speed infos where printed in the board specific code. This new implementation now prints all CPU infos in the common cpu specific code. No board specific code is needed anymore and therefore removed from all current 44x implementations. Patch by Stefan Roese, 27 Nov 2005
* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct sizeStefan Roese2005-11-051-0/+4
| | | | Patch by Stefan Roese, 05 Nov 2005
* Additional fix for external IRQ config on Yellowstone & YosemiteStefan Roese2005-11-031-19/+19
| | | | Patch by Stefan Roese, 03 Nov 2005
* Fix external IRQ configuration on Yellowstone & YosemiteStefan Roese2005-10-281-0/+5
| | | | | | | The multiplexed signals Ext IRQ0...3 have to be configured as IRQ, because they default to GPIOx (440EP/GR). Patch by Stefan Roese, 28 Oct 2005
* Change board message on AMCC Yosemite & Yellowstone to common styleStefan Roese2005-10-031-3/+9
| | | | Patch by Stefan Roese, 3 Oct 2005
* Fix problems with ld version 2.16 (dot outside sections problem)Wolfgang Denk2005-08-311-0/+2
| | | | | Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.cStefan Roese2005-08-161-1/+0
| | | | | now handling all 4xx cpu's. Patch by Stefan Roese, 16 Aug 2005
* Update AMCC Yosemite to get a consistent setup for all AMCC evalStefan Roese2005-08-114-581/+67
| | | | | boards (baudrate, environment...). Flash driver fixed. Patch by Stefan Roese, 11 Aug 2005
* Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.Stefan Roese2005-08-016-0/+1349
Patch by Steven Blakeslee, 27 Jul 2005
OpenPOWER on IntegriCloud