summaryrefslogtreecommitdiffstats
path: root/arch/x86/lib
Commit message (Collapse)AuthorAgeFilesLines
* x86: Drop FSP error defines and use EFI insteadSimon Glass2015-08-141-1/+1
| | | | | | | | Now that we have an efi.h header we can use that for FSP error defines. Drop the FSP ones. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Split out fsp_init_phase_pci() code into a new functionSimon Glass2015-08-141-3/+8
| | | | | | | | | | | This code may be useful for boards that use driver model for PCI. Note: It would be better to have driver model automatically call this function somehow. However for now it is probably safer to have it under board control. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Do not assert VPD_IMAGE_REV when DEBUGBin Meng2015-08-141-2/+1
| | | | | | | | | | When using different release version of Intel FSP, the VPD_IMAGE_REV is different (ie: BayTrail Gold 3 is 0x0303 while Gold 4 is 0x0304). Remove the asserting of this so that U-Boot does not hang in a debug build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add helper code for running from EFISimon Glass2015-08-054-0/+165
| | | | | | | | | | When U-Boot is running from EFI some of the x86 init is replaced with EFI-specific init. For example, since DRAM has already been set up, we only need to find it, not init it. Add these functions so that boards can easily allow booting from EFI if required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Handle running as EFI payloadSimon Glass2015-08-052-0/+16
| | | | | | | | | When U-Boot runs as an EFI payload it needs to avoid setting up the CPU again. Also U-Boot currently does not handle interrupts for many devices, so run with interrupts disabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for passing tables into U-BootSimon Glass2015-08-051-0/+1
| | | | | | | | | | | | The EFI stub provides information to U-Boot in a table. This includes the memory map which is needed to decide where to relocate U-Boot. Collect this information in the early init code and store it in global_data. Fix up the BIST code at the same time since we don't have it when booting from EFI and can assume it is 0. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* efi: Add 64-bit payload supportSimon Glass2015-08-051-0/+51
| | | | | | | | | | | | Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can be enabled for x86 boards at present. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support building the EFI stubSimon Glass2015-08-052-1/+25
| | | | | | | | Add support for building a 32/64-bit EFI stub for x86. This involves building the startup and relocation code for either i386 or x86_64. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add relocation and link script for a 64-bit EFI applicationSimon Glass2015-08-051-0/+66
| | | | | | | | | | Add a linker script and relocation code for building 64-bit EFI applications. This can be used for the EFI stub. Signed-off-by: Simon Glass <sjg@chromium.org> Improvements to how the payload is built: Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow relocation code to build without text baseSimon Glass2015-08-051-6/+11
| | | | | | | | | This code currently requires CONFIG_SYS_TEXT_BASE but this should be unnecessary. As a first step, remove the build-time limitation and report an error instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for U-Boot as an EFI applicationBen Stoltz2015-08-052-0/+124
| | | | | | | | | | Add the required x86 glue code. This includes the initial start-up, relocation and jumping to efi_main(). We also need to avoid fiddling with interrupts. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Support skipping relocation for EFISimon Glass2015-08-051-0/+6
| | | | | | | | When running as an EFI application we must skip relocation. Add support for this in the x86 relocation code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add some missing global_data declarations in files that use gdSimon Glass2015-08-054-0/+8
| | | | | | | Some files use global_data but don't declare it. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Drop unused copy_fdt_to_ram()Simon Glass2015-08-051-18/+0
| | | | | | | | This is now handled by generic U-Boot code so we do not need an x86 version. It is no-longer called, so remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add a 'pause' instruction in __udelay() for QEMU targetMiao Yan2015-08-051-0/+8
| | | | | | | | | | | | | | | | When running SMP configuration on QEMU (tcg mode, no kvm), there is a busy loop in start_aps(), calling udelay(), that waits for APs to show up online. However, there is a chance that VCPU1 will be timeout waiting, IOW the secondary VCPUs haven't started their execution yet. This patch adds a 'pause' instruction in __udelay() only for QEMU target, to give other VCPUs a chance to run. When QEMU sees the 'pause' instruction, it will yeild the execution to other CPUs. Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* x86: Reserve PCIe ECAM address range in the E820 tableBin Meng2015-07-282-1/+10
| | | | | | | | We should mark PCIe ECAM address range in the E820 table as reserved otherwise kernel will not attempt to use ECAM. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: mpspec: Move writing ISA interrupt entry after PCIBin Meng2015-07-281-5/+21
| | | | | | | | | | On some platforms the I/O APIC interrupt pin#0-15 may be connected to platform pci devices' interrupt pin. In such cases the legacy ISA IRQ is not available so we should not write ISA interrupt entry if it is already occupied. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APICBin Meng2015-07-281-7/+17
| | | | | | | | | Currently during writing MP table I/O interrupt assignment entry, we assume the PIRQ is directly mapped to I/O APIC INTPIN#16-23, which however is not always the case on some platforms. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: pci: Assign pci irqs to all functionsBin Meng2015-07-281-2/+1
| | | | | | | | We need walk through all functions within a PCI device and assign their IRQs accordingly. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Configure VESA parameters before loading Linux kernelBin Meng2015-07-141-0/+2
| | | | | | | | | Store VESA parameters to Linux setup header so that vesafb driver in the kernel could work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
* x86: cmd_mtrr: Improve MTRR list informationBin Meng2015-07-141-1/+2
| | | | | | | | Print the meaningful base address and mask of an MTRR range without showing the memory type encoding or valid bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: bios: Allow pci config read/write to host bridge in int1a_handlerJian Luo2015-07-141-9/+1
| | | | | | | | | We should allow pci config read/write to host bridge (b.d.f = 0.0.0) in the int1a_handler() which is a valid pci device. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: bios: Synchronize stack between real and protected modeJian Luo2015-07-141-0/+23
| | | | | | | | | PCI option rom may use different SS during its execution, so it is not safe to assume esp pointed to the same location in the protected mode. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Generate a valid MultiProcessor (MP) tableBin Meng2015-07-142-0/+162
| | | | | | | | | | | | | | | | | | | | Implement write_mp_table() to create a minimal working MP table. This includes an MP floating table, a configuration table header and all of the 5 base configuration table entries. The I/O interrupt assignment table entry is created based on the same information used in the creation of PIRQ routing table from device tree. A check duplicated entry logic is applied to prevent writing multiple I/O interrupt entries with the same information. Use a Kconfig option GENERATE_MP_TABLE to tell U-Boot whether we need actually write the MP table at the F seg, just like we did for PIRQ routing and SFI tables. With MP table existence, linux kernel will switch to I/O APIC and local APIC to process all the peripheral interrupts instead of 8259 PICs. This takes full advantage of the multicore hardware and the SMP kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add MultiProcessor (MP) table APIsBin Meng2015-07-143-0/+240
| | | | | | | | | | | The MP table provides a way for the operating system to support for symmetric multiprocessing as well as symmetric I/O interrupt handling with the local APIC and I/O APIC. We provide a bunch of APIs for U-Boot to write the floating table, configuration table header as well as base and extended table entries. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-142-21/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Load GDT before calling FspInitEntryBin Meng2015-07-141-0/+3
| | | | | | | | | | | | | | | | | | | | | Currently the FSP execution environment GDT is setup by U-Boot in arch/x86/cpu/start16.S, which works pretty well. But if we try to move the FspInitEntry call a little bit later to better fit into U-Boot's initialization sequence, FSP will fail to bring up the AP due to #GP fault as AP's GDT is duplicated from BSP whose GDT is now moved into CAR, and unfortunately FSP calls AP initialization after it disables the CAR. So basically the BSP's GDT still refers to the one in the CAR, whose content is no longer available, so when AP starts up and loads its segment register, it blows up. To resolve this, we load GDT before calling into FspInitEntry. The GDT is the same one used in arch/x86/cpu/start16.S, which is in the ROM and exists forever. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp_support: Correct high mem comment typoAndrew Bradford2015-06-041-1/+1
| | | | | | | | High mem starts at 4 GiB. Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add support for the Simple Firmware Interface (SFI)Simon Glass2015-04-293-0/+160
| | | | | | | | | This provides a way of passing information to Linux without requiring the full ACPI horror. Provide a rudimentary implementation sufficient to be recognised and parsed by Linux. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: fsp: Use reset_cpu()Simon Glass2015-04-291-7/+0
| | | | | | | | Now that reset_cpu() functions correctly, use it instead of directly accessing the port on boards that use a Firmware Support Package (FSP). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Correct the typo in write_tables()Bin Meng2015-04-291-1/+1
| | | | | | | It should be #ifdef instead of #if. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Check PIRQ routing table sanity in the F segmentBin Meng2015-04-291-5/+13
| | | | | | | | | | Previously the PIRQ routing table sanity check was performed against the original table provided by the platform codes. Now we switch to check its sanity on the final table in the F segment as this one is the one seen by the OS. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support platform PIRQ routingBin Meng2015-04-292-0/+130
| | | | | | | | | | | | | | | On x86 boards, platform chipset receives up to four different interrupt signals from PCI devices (INTA/B/C/D), which in turn will be routed to chipset internal PIRQ lines then routed to 8259 PIC finally if configuring the whole system to work under the so-called PIC mode (in contrast to symmetric IO mode which uses IOAPIC). We add two major APIs to aid this, one for routing PIRQ and the other one for generating a PIRQ routing table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Write configuration tables in last_stage_init()Bin Meng2015-04-292-0/+31
| | | | | | | | We can write the configuration table in last_stage_init() for all x86 boards, but not with coreboot since coreboot already has them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Install a default e820 table in the __weak install_e820_map()Bin Meng2015-04-291-7/+22
| | | | | | | | Create a default e820 table with 3 entries which is enough to boot a Linux kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove the old VGA driverBin Meng2015-04-292-206/+0
| | | | | | | CONFIG_VIDEO_VGA is no longer needed thus remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: x86: Add a uclass for an Low Pin Count (LPC) deviceSimon Glass2015-04-182-0/+29
| | | | | | | | | On x86 systems this device is commonly used to provide legacy port access. It is sort-of a replacement for the old ISA bus. Add a uclass for this, and allow it to have child devices. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: Add a uclass for a Platform Controller HubSimon Glass2015-04-182-0/+29
| | | | | | | | | Add a simple uclass for this chip which is often found in x86 systems where the CPU is a separate device. The device can have children, so make it scan the device tree for these. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: spi: Convert ICH SPI driver to driver modelSimon Glass2015-04-181-8/+0
| | | | | | | | | | | | Convert this driver over to use driver model. Since all x86 platforms use it, move x86 to use driver model for SPI and SPI flash. Adjust all dependent code and remove the old x86 spi_init() function. Note that this does not make full use of the new PCI uclass as yet. We still scan the bus looking for the device. It should move to finding its details in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Add a PCI driver for driver modelSimon Glass2015-04-181-0/+2
| | | | | | | Add a simple x86 PCI driver which uses standard functions provided by the architecture. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add a x86_ prefix to the x86-specific PCI functionsSimon Glass2015-04-161-6/+6
| | | | | | | | | | | | These functions currently use a generic name, but they are for x86 only. This may introduce confusion and prevents U-Boot from using these names more widely. In fact it should be possible to remove these at some point and use generic functions, but for now, rename them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Define macros for pci configuration space accessBin Meng2015-02-061-5/+2
| | | | | | | | | Move PCI_REG_ADDR and PCI_REG_DATA from arch/x86/lib/pci_type1.c to arch/x86/include/asm/pci.h, also define PCI_CFG_EN so that these macros can be used for pci configuration space access. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Allow a UART to be set up before the FSP is readySimon Glass2015-02-061-0/+4
| | | | | | | | | Since the FSP is a black box it helps to have some sort of debugging available to check its inputs. If the debug UART is in use, set it up after CAR is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Remove unnecessary casts and fix comment typosSimon Glass2015-02-061-5/+5
| | | | | | | Tidy up the FSP support code a little. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: mmc: Move common FSP functions into a common fileSimon Glass2015-02-062-0/+56
| | | | | | | | | | | | Since these board functions seem to be the same for all boards which use FSP, move them into a common file. We can adjust this later if future FSPs need more flexibility. This creates a generic PCI MMC device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Make CAR and DRAM FSP code commonSimon Glass2015-02-053-0/+207
| | | | | | | | | For now this code seems to be the same for all FSP platforms. Make it common until we see what differences are required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Adjust the FSP types slightlySimon Glass2015-02-051-2/+2
| | | | | | | | | | To avoid casts, find_fsp_header() should return a pointer. Add asmlinkage to two API functions which use that convention. UPD_TERMINATOR is common so move it into a common file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Move common FSP code into a common locationSimon Glass2015-02-054-1/+417
| | | | | | Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Test mtrr support flag before accessing mtrr msrBin Meng2015-01-231-1/+3
| | | | | | | | | | On some x86 processors (like Intel Quark) the MTRR registers are not supported. This is reflected by the CPUID (EAX 01H) result EDX[12]. Accessing the MTRR registers on such processors will cause #GP so we must test the support flag before accessing MTRR MSRs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Fix out of bounds irq handlers accessSebastien Ronsse2015-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | Using coreboot-x86_defconfig, the following error occurred prior to this modification: CC arch/x86/lib/interrupts arch/x86/lib/interrupts.c: In function ‘do_irqinfo’: arch/x86/lib/interrupts.c:134:24: error: iteration 16u invokes undefined behavior [-Werror=aggressive-loop-optimizations] if (irq_handlers[irq].handler != NULL) { ^ arch/x86/lib/interrupts.c:133:2: note: containing loop for (irq = 0; irq <= CONFIG_SYS_NUM_IRQS; irq++) { ^ cc1: all warnings being treated as errors scripts/Makefile.build:275: recipe for target 'arch/x86/lib/interrupts.o' failed make[1]: *** [arch/x86/lib/interrupts.o] Error 1 Makefile:1093: recipe for target 'arch/x86/lib' failed make: *** [arch/x86/lib] Error 2 Change-Id: I3572a822081b72ab760f1eb99442e1161d3d167e Signed-off-by: Sebastien Ronsse <sronsse@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
OpenPOWER on IntegriCloud