summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm
Commit message (Collapse)AuthorAgeFilesLines
* x86: delete unneeded declarations of disable_irq() and enable_irq()Masahiro Yamada2015-07-221-4/+0
| | | | | | | | | | | | | These two declarations in arch/x86/include/asm/interrupt.h conflict with ones in include/linux/compat.h, so x86 boards cannot include <linux/compat.h>. The comment /* arch/x86/lib/interrupts.c */ is bogus now, and we do not see any definitions of disable_irq() and enable_irq() in there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Configure VESA parameters before loading Linux kernelBin Meng2015-07-141-0/+1
| | | | | | | | | Store VESA parameters to Linux setup header so that vesafb driver in the kernel could work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
* x86: Setup fixed range MTRRs for legacy regionsBin Meng2015-07-141-11/+16
| | | | | | | | | We should setup fixed range MTRRs for some legacy regions like VGA RAM and PCI ROM areas as uncacheable. Note FSP may setup these to other cache settings, but we can override this in x86_cpu_init_f(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Generate a valid MultiProcessor (MP) tableBin Meng2015-07-141-0/+10
| | | | | | | | | | | | | | | | | | | | Implement write_mp_table() to create a minimal working MP table. This includes an MP floating table, a configuration table header and all of the 5 base configuration table entries. The I/O interrupt assignment table entry is created based on the same information used in the creation of PIRQ routing table from device tree. A check duplicated entry logic is applied to prevent writing multiple I/O interrupt entries with the same information. Use a Kconfig option GENERATE_MP_TABLE to tell U-Boot whether we need actually write the MP table at the F seg, just like we did for PIRQ routing and SFI tables. With MP table existence, linux kernel will switch to I/O APIC and local APIC to process all the peripheral interrupts instead of 8259 PICs. This takes full advantage of the multicore hardware and the SMP kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add MultiProcessor (MP) table APIsBin Meng2015-07-142-0/+448
| | | | | | | | | | | The MP table provides a way for the operating system to support for symmetric multiprocessing as well as symmetric I/O interrupt handling with the local APIC and I/O APIC. We provide a bunch of APIs for U-Boot to write the floating table, configuration table header as well as base and extended table entries. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Remove inline for lapic access routinesBin Meng2015-07-141-124/+10
| | | | | | | | | Remove inline for lapic access routines and expose lapic_read() & lapic_write() as APIs to read/write lapic registers. Also move stop_this_cpu() to mp_init.c as it has nothing to do with lapic. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add I/O APIC register access routinesBin Meng2015-07-141-0/+24
| | | | | | | | | I/O APIC registers are addressed indirectly. Add io_apic_read() and io_apic_write() routines to help register access. Two macros for I/O APIC ID and version register offset are also added. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up ioapic header fileBin Meng2015-07-141-23/+3
| | | | | | | Remove all the dead/unused macros from asm/ioapic.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up lapic codesBin Meng2015-07-143-161/+85
| | | | | | | | | | | | | | | This commit cleans up the lapic codes: - Delete arch/x86/include/asm/lapic_def.h, and move register and bit defines into arch/x86/include/asm/lapic.h - Use MSR defines from msr-index.h in enable_lapic() and disable_lapic() - Remove unnecessary stuff like NEED_LAPIC, X86_GOOD_APIC and CONFIG_AP_IN_SIPI_WAIT - Move struct x86_cpu_priv defines to asm/arch-ivybridge/bd82x6x.h, as it is not apic related and only used by ivybridge - Fix coding convention issues Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Move MP initialization codes into a common placeBin Meng2015-07-141-1/+0
| | | | | | | | | | | Most of the MP initialization codes in arch/x86/cpu/baytrail/cpu.c is common to all x86 processors, except detect_num_cpus() which varies from cpu to cpu. Move these to arch/x86/cpu/cpu.c and implement the new 'get_count' method for baytrail and cpu_x86 drivers. Now we call cpu_get_count() in mp_init() to get the number of CPUs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: dm: Clean up cpu driversBin Meng2015-07-142-14/+34
| | | | | | | | | | | | | | | This commit does the following to clean up x86 cpu dm drivers: - Move cpu_x86 driver codes from arch/x86/cpu/cpu.c to a dedicated file arch/x86/cpu/cpu_x86.c - Rename x86_cpu_get_desc() to cpu_x86_get_desc() to keep consistent naming with other dm drivers - Add a new cpu_x86_bind() in the cpu_x86 driver which does exactly the same as the one in the intel baytrail cpu driver - Update intel baytrail cpu driver to use cpu_x86_get_desc() and cpu_x86_bind() Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Move FspInitEntry call to board_init_f()Bin Meng2015-07-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far. It worked pretty well but looks not that good. Apart from doing too much work than just enabling CAR, it cannot read the configuration data from device tree at that time. Now we want to move it a little bit later as part of init_sequence_f[] being called by board_init_f(). This way it looks and works better in the U-Boot initialization path. Due to FSP's design, after calling FspInitEntry it will not return to its caller, instead it jumps to a continuation function which is given by bootloader with a new stack in system memory. The original stack in the CAR is gone, but its content is perserved by FSP and described by a bootloader temporary memory HOB. Technically we can recover anything we had before in the previous stack, but that is way too complicated. To make life much easier, in the FSP continuation routine we just simply call fsp_init_done() and jump back to car_init_ret() to redo the whole board_init_f() initialization, but this time with a non-zero HOB list pointer saved in U-Boot's global data so that we can bypass the FspInitEntry for the second time. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Load GDT before calling FspInitEntryBin Meng2015-07-141-0/+7
| | | | | | | | | | | | | | | | | | | | | Currently the FSP execution environment GDT is setup by U-Boot in arch/x86/cpu/start16.S, which works pretty well. But if we try to move the FspInitEntry call a little bit later to better fit into U-Boot's initialization sequence, FSP will fail to bring up the AP due to #GP fault as AP's GDT is duplicated from BSP whose GDT is now moved into CAR, and unfortunately FSP calls AP initialization after it disables the CAR. So basically the BSP's GDT still refers to the one in the CAR, whose content is no longer available, so when AP starts up and loads its segment register, it blows up. To resolve this, we load GDT before calling into FspInitEntry. The GDT is the same one used in arch/x86/cpu/start16.S, which is in the ROM and exists forever. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* x86: gpio: add pinctrl support from the device treeGabriel Huau2015-06-041-0/+1
| | | | | | | | | Every pin can be configured now from the device tree. A dt-bindings has been added to describe the different property available. Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975 Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Simon Glass <sjg@chromium.org>
* x86: coreboot: Fix cosmetic issuesBin Meng2015-06-041-1/+0
| | | | | | | Clean up arch/x86/cpu/coreboot.c to fix several cosmetic issues. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Adjust VGA initializationBin Meng2015-06-041-0/+2
| | | | | | | | | | | | | As VGA option rom needs to run at C segment, although QEMU PAM emulation seems to only guard E/F segments, for correctness, move VGA initialization after PAM decode C/D/E/F segments. Also since we already tested QEMU targets to differentiate I440FX and Q35 platforms, change to locate the VGA device via hardcoded b.d.f instead of dynamic search for its vendor id & device id pair. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Enable legacy IDE I/O ports decodeBin Meng2015-06-042-0/+24
| | | | | | | | | QEMU always decode legacy IDE I/O ports on PIIX chipset. However Linux ata_piix driver does sanity check to see whether legacy ports decode is turned on. To make Linux ata_piix driver happy, turn on the decode via IDE_TIMING register. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: qemu: Turn on legacy segments decodeBin Meng2015-06-041-0/+6
| | | | | | | | | By default the legacy segments C/D/E/F do not decode to system RAM. Turn on the decode via Programmable Attribute Map (PAM) registers so that we can write configuration tables in the F segment. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: quark: Implement PIRQ routingBin Meng2015-06-042-15/+70
| | | | | | | | | Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Refactor PIRQ routing supportBin Meng2015-06-042-55/+76
| | | | | | | | | | | | PIRQ routing is pretty much common in Intel chipset. It has several PIRQ links (normally 8) and corresponding registers (either in PCI configuration space or memory-mapped IBASE) to configure the legacy 8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing support using device tree and move it to a common place, so that we can easily add PIRQ routing support on a new platform. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support QEMU x86 targetsBin Meng2015-06-042-0/+30
| | | | | | | | | | | This commit introduces the initial U-Boot support for QEMU x86 targets. U-Boot can boot from coreboot as a payload, or directly without coreboot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig https://patchwork.ozlabs.org/patch/479745/
* x86: Add a CPU driver for baytrailSimon Glass2015-04-303-6/+21
| | | | | | | | This driver supports multi-core init and sets up the CPU frequencies correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Allow CPUs to be set up after relocationSimon Glass2015-04-302-0/+16
| | | | | | | | This permits init of additional CPU cores after relocation and when driver model is ready. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add functions to set and clear bits on MSRsSimon Glass2015-04-301-0/+28
| | | | | | | | Since we do these sorts of operations a lot, it is useful to have a simpler API, similar to clrsetbits_le32(). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add multi-processor initSimon Glass2015-04-305-5/+187
| | | | | | | | | Most modern x86 CPUs include more than one CPU core. The OS normally requires that these 'Application Processors' (APs) be brought up by the boot loader. Add the required support to U-Boot to init additional APs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Provide access to the IDTSimon Glass2015-04-291-0/+2
| | | | | | | Add a function to return the address of the Interrupt Descriptor Table. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Store the GDT pointer in global_dataSimon Glass2015-04-291-0/+1
| | | | | | | | | When we start up additional CPUs we want them to use the same Global Descriptor Table. Store the address of this in global_data so we can reference it later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add an mfence macroSimon Glass2015-04-291-0/+5
| | | | | | | Provide access to this x86 instruction from C code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add defines for fixed MTRRsSimon Glass2015-04-291-0/+14
| | | | | | | Add MSR numbers for the fixed MTRRs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add atomic operationsSimon Glass2015-04-291-0/+115
| | | | | | | | Add a subset of this header file from Linux 4.0 to support atomic operations in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Add support for the Simple Firmware Interface (SFI)Simon Glass2015-04-291-0/+137
| | | | | | | | | This provides a way of passing information to Linux without requiring the full ACPI horror. Provide a rudimentary implementation sufficient to be recognised and parsed by Linux. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: Implement reset_cpu() correctly for modern CPUsSimon Glass2015-04-291-0/+19
| | | | | | | | | | | | The existing code is pretty ancient and is unreliable on modern hardware. Generally it will hang. We can use port 0xcf9 to initiate reset on more modern hardware (say in the last 10 years). Update the reset_cpu() function to do this, and add a new 'full reset' function to perform a full power cycle. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* x86: quark: Turn on legacy segments decodeBin Meng2015-04-291-0/+7
| | | | | | | | | By default the legacy segments (A0000h-B0000h, E0000h-F0000h) do not decode to system RAM. Turn on the decode so that we can write configuration tables in the F segment. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: baytrail: fix the GPIOBASE addressGabriel Huau2015-04-291-1/+1
| | | | | | | | The correct GPIOBASE address on the baytrail is 0x48 Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Implement PIRQ routingBin Meng2015-04-294-2/+188
| | | | | | | | Implement Intel Queensbay platform-specific PIRQ routing support. The chipset PIRQ routing setup is called in the arch_misc_init(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Support platform PIRQ routingBin Meng2015-04-291-0/+139
| | | | | | | | | | | | | | | On x86 boards, platform chipset receives up to four different interrupt signals from PCI devices (INTA/B/C/D), which in turn will be routed to chipset internal PIRQ lines then routed to 8259 PIC finally if configuring the whole system to work under the so-called PIC mode (in contrast to symmetric IO mode which uses IOAPIC). We add two major APIs to aid this, one for routing PIRQ and the other one for generating a PIRQ routing table. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Write configuration tables in last_stage_init()Bin Meng2015-04-291-0/+49
| | | | | | | | We can write the configuration table in last_stage_init() for all x86 boards, but not with coreboot since coreboot already has them. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Add a function to assign IRQ numbers to PCI deviceBin Meng2015-04-291-0/+14
| | | | | | | | | Add a function to assign an IRQ number to PCI device's interrupt line register in its configuration space, so that the PCI device can have its interrupt working under PIC mode after OS boots up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Clean up arch/x86/include/asm/e820.hBin Meng2015-04-291-131/+2
| | | | | | | There are lots of unused codes defined in e820.h, clean it up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Set serial port IRQ for SMSC LPC47MBin Meng2015-04-291-0/+3
| | | | | | | | | For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured. Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: queensbay: Avoid using PCH prefixBin Meng2015-04-291-2/+1
| | | | | | | | | | The prefix PCH was taken from ivybridge port. However Queensbay platform official document does not mention PCH. It is composed of TunnelCreek processor and Topcliff IOH chipset. For accuracy, avoid using PCH prefix in the macro. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: x86: spi: Convert ICH SPI driver to driver modelSimon Glass2015-04-181-2/+2
| | | | | | | | | | | | Convert this driver over to use driver model. Since all x86 platforms use it, move x86 to use driver model for SPI and SPI flash. Adjust all dependent code and remove the old x86 spi_init() function. Note that this does not make full use of the new PCI uclass as yet. We still scan the bus looking for the device. It should move to finding its details in the device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Convert chromebook_link to use driver model for pciSimon Glass2015-04-181-1/+0
| | | | | | | | | | | | | | | | Move chromebook_link over to driver model for PCI. This involves: - adding a uclass for platform controller hub - removing most of the existing PCI driver - adjusting how CPU init works to use driver model instead - rename the lpc compatible string (it will be removed later) This does not really take advantage of driver model fully, but it does work. Furture work will improve the code structure to remove many of the explicit calls to init the board. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: x86: pci: Add a PCI driver for driver modelSimon Glass2015-04-181-0/+8
| | | | | | | Add a simple x86 PCI driver which uses standard functions provided by the architecture. Signed-off-by: Simon Glass <sjg@chromium.org>
* x86: Add a x86_ prefix to the x86-specific PCI functionsSimon Glass2015-04-161-6/+6
| | | | | | | | | | | | These functions currently use a generic name, but they are for x86 only. This may introduce confusion and prevents U-Boot from using these names more widely. In fact it should be possible to remove these at some point and use generic functions, but for now, rename them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* generic-board: select SYS_GENERIC_BOARD for some architecturesMasahiro Yamada2015-03-281-1/+0
| | | | | | | | | | | | We have done with the generic board conversion for all the boards of ARC, Blackfin, M68000, MicroBlaze, MIPS, NIOS2, Sandbox, X86. Let's select SYS_GENERIC_BOARD for those architectures, so we can tell which architecture has finished the conversion at a glance. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2015-02-1021-9/+576
|\
| * x86: quark: Initialize non-standard BARsBin Meng2015-02-061-0/+32
| | | | | | | | | | | | | | | | | | Quark SoC has some non-standard BARs (excluding PCI standard BARs) which need be initialized with suggested values. This includes GPIO, WDT, RCBA, PCIe ECAM and some ACPI register block base addresses. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: quark: Add Memory Reference Code (MRC) main routinesBin Meng2015-02-061-0/+187
| | | | | | | | | | | | | | Add the main routines for Quark Memory Reference Code (MRC). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * x86: Add basic Intel Quark processor supportBin Meng2015-02-061-0/+13
| | | | | | | | | | | | | | | | Add minimum codes to support Intel Quark SoC. DRAM initialization is not ready yet so a hardcoded gd->ram_size is assigned. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
OpenPOWER on IntegriCloud