summaryrefslogtreecommitdiffstats
path: root/arch/sandbox
Commit message (Collapse)AuthorAgeFilesLines
* sandbox: Tidy up terminal restoreSimon Glass2015-06-042-3/+7
| | | | | | | | | For some reason 'u-boot -D' does not restore the terminal correctly when the 'reset' command is used. Call the terminal restore function explicitly in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* sandbox: Use defconfig to enable featuresJoe Hershberger2015-05-211-15/+0
| | | | | | | Stop using the sandbox arch Kconfig to override defaults for config options. This is a bit of abuse and may be causing build problems. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* sandbox: dts: add sandbox_pmic.dtsi and include it to sandbox.dts and test.dtsPrzemyslaw Marczak2015-05-143-0/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds dtsi file for Sandbox PMIC. It fully describes the PMIC by: - i2c emul node - with a default settings of 16 registers - 2x buck regulator nodes - 2x ldo regulator nodes The default register settings are set with preprocessor macros: - VAL2REG(min[uV/uA], step[uV/uA], val[uV/uA]) - VAL2OMREG(mode id) Both defined in file: - include/dt-bindings/pmic/sandbox_pmic.h The Voltage ranges of each regulator can be found in: - include/power/sandbox_pmic.h The new file is included into: - sandbox.dts - test.dts Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* test: dm: test.dts - move to sandbox dts directoryPrzemyslaw Marczak2015-05-142-0/+231
| | | | | | | | | | | | | | | | | The file test.dts from driver model test directory, was compiled by call dtc in script: test/dm/test-dm.sh. This doesn't allow for including of dtsi files and using of C preprocessor routines in this dts file. Since the mentioned script builds U-Boot before tests, then moving the test.dts file into sandbox dts directory is reasonable. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
* sandbox: Support wide-screen LCD emulationSimon Glass2015-05-141-2/+2
| | | | | | Increase the LCD size to 1366x768. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add missing errno.h includes in a few filesSimon Glass2015-05-141-0/+1
| | | | | | These files use error numbering, so add the include. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Correct error handling in state_read_file()Simon Glass2015-05-141-1/+1
| | | | | | | This function should return a useful error for U-Boot, rather than -1. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* sandbox: Don't try distro_bootcmd by defaultSjoerd Simons2015-05-062-3/+18
| | | | | | | | | | | | For the distro_bootcmds to succeed on the sandbox a bit of setup is required (e.g. network configured or host image bound), so running them by default isn't that useful. Add a -b/--boot command to the sandbox binary, which triggers the distro_bootcmds to run after the other command-line commands. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
* dm: sandbox: dts: Add a real-time clock attached to I2CSimon Glass2015-05-051-1/+11
| | | | | | | Add an emulated RTC device for sandbox, so that the 'date' command can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: rtc: sandbox: Add an emulated I2C RTC deviceSimon Glass2015-05-052-0/+49
| | | | | | | | | | | | Add a sandbox I2C emulation device which emulates a real-time clock. The clock works off an offset from the current system time, and supports setting and getting the clock, as well as access to byte-width regisers in the RTC. It does not support changing the system time. This device can be used for testing the 'date' command on sandbox, as well as the RTC uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: sandbox: Add os_localtime() to obtain the system timeSimon Glass2015-05-051-0/+18
| | | | | | Add a function to read the system time into U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: i2c: Add an explicit test mode to the sandbox I2C driverSimon Glass2015-05-051-0/+10
| | | | | | | | | At present this driver has a few test features. They are needed for running the driver model unit tests but are confusing and unnecessary if using sandbox at the command line. Add a flag to enable the test mode, and don't enable it by default. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add a function to skip ping timeoutsJoe Hershberger2015-05-051-0/+2
| | | | | | | | | When called, the next call to receive will trigger a 10-second leap forward in time to avoid waiting for time to pass when tests are evaluating timeout behavior. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: Add test function to advance timeJoe Hershberger2015-05-052-5/+8
| | | | | | | | | | Add a function that maintains an offset to include in the system timer values returned from the lib/time.c APIs. This will allow timeouts to be skipped instantly in tests Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* fdt: sandbox: Move setup code from board_f to fdtdecSimon Glass2015-04-232-0/+49
| | | | | | | We want to be able to set up the device tree in SPL, so move this code to a common place. Signed-off-by: Simon Glass <sjg@chromium.org>
* exynos: sandbox: ti: Add SPDX license identifiers and notesSimon Glass2015-04-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | For some files I neglected to add a license. Rectify this: arch/arm/dts/exynos4210-pinctrl-uboot.dtsi arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi arch/arm/dts/exynos5250-pinctrl-uboot.dtsi arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi arch/arm/dts/s5pc100-pinctrl.dtsi arch/arm/dts/s5pc110-pinctrl.dtsi This file came from Linux and has no license information there, so add a comment to that effect: arch/sandbox/include/asm/bitops.h This file also came from Linux - presumably someone from TI could add the license: include/dt-bindings/pinctrl/omap.h Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Ingrid Viitanen <ingrid.viitanen@nokia.com>
* sandbox: Add support for bootzSjoerd Simons2015-04-191-0/+42
| | | | | | | | | Add dummy bootz_setup implementation allowing the u-boot sandbox to run bootz. This recognizes both ARM and x86 zImages to validate a valid zImage was loaded. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
* sandbox: Split bootm code out into lib/bootmSjoerd Simons2015-04-193-12/+22
| | | | | | | | Follow the convention of other architectures and move the platform specific linux bootm code into sandbox/lib/bootm.c. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org>
* dm: select CONFIG_DM* optionsMasahiro Yamada2015-04-181-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* dm: usb: dts: sandbox: Add some sample USB devices to sandboxSimon Glass2015-04-181-0/+40
| | | | | | | These allow basic testing of the USB functionality within sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* cros_ec: exynos: Match up device tree with kernel versionSimon Glass2015-04-182-90/+130
| | | | | | | | | | | The U-Boot device trees are slightly different in a few places. Adjust them to remove most of the differences. Note that U-Boot does not support the concept of interrupts as distinct from GPIOs, so this difference remains. For sandbox, use the same keyboard file as for ARM boards and drop the host emulation bus which seems redundant. Signed-off-by: Simon Glass <sjg@chromium.org>
* cros_ec: Drop unused CONFIG_DM_CROS_ECSimon Glass2015-04-181-3/+0
| | | | | | | Since all supported boards enable this option now, we can remove it along with the old code. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add support for using the 'lo' interfaceJoe Hershberger2015-04-183-3/+127
| | | | | | | | | | | | | | | The 'lo' interface on Linux doesn't support thinks like ARP or link-layer access like we use to talk to a normal network interface. A higher-level network API must be used to access localhost. As written, this interface is limited to not supporting ICMP since the API doesn't allow the socket to be opened for all IP traffic and be able to receive at the same time. UDP is far more useful to test with, so it was selected over ICMP. Ping won't work, but things like TFTP should work. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add a bridge to a real network for sandboxJoe Hershberger2015-04-185-0/+191
| | | | | | | | | | | | | | Implement a bridge between U-Boot's network stack and Linux's raw packet API allowing the sandbox to send and receive packets using the host machine's network interface. This raw Ethernet API requires elevated privileges. You can either run as root, or you can add the capability needed like so: sudo /sbin/setcap "CAP_NET_RAW+ep" /path/to/u-boot Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add ability to disable ping reply in sandbox eth driverJoe Hershberger2015-04-181-0/+15
| | | | | | | | This is needed to test the netretry functionality (make the command fail on a sandbox eth device). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add ARP and PING response to sandbox driverJoe Hershberger2015-04-181-0/+1
| | | | | | | | | The sandbox driver will now generate response traffic to exercise the ping command even when no network exists. This allows the basic data pathways of the DM to be tested. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sandbox: eth: Add network support to sandboxJoe Hershberger2015-04-182-0/+13
| | | | | | | Add basic network support to sandbox which includes a network driver. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* dm: sandbox: pci: Add PCI support for sandboxSimon Glass2015-04-169-7/+284
| | | | | | | | Add the required header information, device tree nodes and I/O accessor functions to support PCI on sandbox. All devices are emulated by drivers which can be added as required for testing or development. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Update device tree 'reg' properties for I2C and SPISimon Glass2015-04-161-3/+3
| | | | | | | | We should have a size value for these. Add one in each case. This will be needed for PCI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* generic-board: select SYS_GENERIC_BOARD for some architecturesMasahiro Yamada2015-03-281-1/+1
| | | | | | | | | | | | We have done with the generic board conversion for all the boards of ARC, Blackfin, M68000, MicroBlaze, MIPS, NIOS2, Sandbox, X86. Let's select SYS_GENERIC_BOARD for those architectures, so we can tell which architecture has finished the conversion at a glance. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
* generic-board: move __HAVE_ARCH_GENERIC_BOARD to KconfigMasahiro Yamada2015-03-281-3/+0
| | | | | | | | Move the option to Kconfig renaming it to CONFIG_HAVE_GENERIC_BOARD. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
* Merge branch 'sandbox' of git://git.denx.de/u-boot-x86Tom Rini2015-02-164-28/+10
|\
| * sandbox: Adjust the order of the NO_SDL checkSimon Glass2015-02-151-6/+6
| | | | | | | | | | | | | | | | | | | | | | An option is provided to avoid using SDL in U-Boot sandbox (and drop support for the LCD). However the check in the Makefile is too late and warnings are printed even if NO_SDL=y is given. Adjust the order to avoid this warning. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| * sandbox: Return '-c command' exit value as sandbox exit codeJoe Hershberger2015-02-153-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | When a command is passed into sandbox using the '-c' argument the command is run directly. This is most helpful when running tests (such as test-dm.sh). Previously the exit code was an unused enum. Change it to be the actual return code from the command so that the script calling sandbox can know if the command succeeded (tests passed). Also remove the now completely unused "exit_state" in sandbox. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dm: sandbox: Move driver model CONFIGs to KconfigSimon Glass2015-02-121-0/+24
|/ | | | | | | Remove driver model CONFIGs from the board config headers and use Kconfig instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Move dram_init() declaration to common locationMichal Simek2015-02-091-1/+0
| | | | | Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'patman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-312-4/+22
|\
| * sandbox: Add a -D option to use a default device treeSimon Glass2015-01-301-0/+20
| | | | | | | | | | | | | | | | It is painful to specify the full path to the device tree with the -d option. It is normally kept in the same directory as U-Boot, so provide an option to use this by default. Signed-off-by: Simon Glass <sjg@chromium.org>
| * sandbox: Correct cros-ec keyboard definitionSimon Glass2015-01-301-4/+2
| | | | | | | | | | | | | | The other boards got updated to the standard binding. Update sandbox as well. Signed-off-by: Simon Glass <sjg@chromium.org>
* | dm: demo: Add a simple GPIO demonstrationSimon Glass2015-01-291-1/+10
|/ | | | | | | | Add a new 'demo light' command which uses GPIOs to control imaginary lights. Each light is assigned a bit number in the overall value. This provides an example driver for using the new GPIO API. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: i2c: dts: Add an I2C bus for sandboxSimon Glass2014-12-111-0/+17
| | | | | | | | | Add an I2C bus to the device tree, with an EEPROM emulator attached to one of the addresses. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* dm: i2c: Add an I2C EEPROM simulatorSimon Glass2014-12-111-0/+26
| | | | | | | | | To enable testing of I2C, add a simple I2C EEPROM simulator for sandbox. It supports reading and writing from a small data store. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Kbuild: introduce Makefile in arch/$ARCH/Daniel Schwierzeck2014-12-081-0/+8
| | | | | | | | | | | | | | | Introduce a Makefile under arch/$ARCH/ and include it in the top Makefile (similar to Linux kernel). This allows further refactoringi like moving architecture-specific code out of global makefiles, deprecating config variables (CPU, CPUDIR, SOC) or deprecating arch/$ARCH/config.mk. In contrary to Linux kernel, U-Boot defines the ARCH variable by Kconfig, thus the arch Makefile can only included conditionally after the top config.mk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* sandbox: Fix warnings in cpu.c and os.cSimon Glass2014-11-262-1/+3
| | | | | | | | | | | This fixes the following two problems: cppcheck reports: [arch/sandbox/cpu/start.c:132]: (error) Uninitialized variable: err [arch/sandbox/cpu/os.c:371]: (error) Memory leak: fname Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Wolfgang Denk <wd@denx.de>
* sandbox: Prepare API change for files greater than 2GBSuriyan Ramasami2014-11-232-10/+11
| | | | | | | | Change the internal sandbox functions to use loff_t for file offsets. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* linux/kernel.h: sync min, max, min3, max3 macros with LinuxMasahiro Yamada2014-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
* sandbox: init cli for -cRabin Vincent2014-11-071-0/+3
| | | | | | | | | | | | | | sandbox crashes if a variable is set in the -c command, because hush's top_vars is not allocated. Call cli_init() from sandbox to ensure this is done before we execute the -c command. $ ./u-boot -c 'a=1' ... Segmentation fault (core dumped) Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Simon Glass <sjg@chromium.org) Tested-by: Simon Glass <sjg@chromium.org)
* Provide option to avoid defining a custom version of uintptr_t.Gabe Black2014-10-271-0/+5
| | | | | | | | | | | | | | | | | | There's a definition in stdint.h (provided by gcc) which will be more correct if available. Define CONFIG_USE_STDINT to use this feature, or USE_STDINT=1 on the 'make' commmand. This adjusts the settings for x86 and sandbox, with both have 64-bit options. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Bill Richardson <wfrichar@google.com> Rewritten to be an option, since stdint.h is often available only in glibc. Changed to preserve a clear boundary between stdint and non-stdint Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: sf: sandbox: Convert SPI flash driver to driver modelSimon Glass2014-10-222-14/+0
| | | | | | | Convert sandbox's spi flash emulation driver to use driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* dm: sandbox: spi: Move to driver modelSimon Glass2014-10-221-0/+1
| | | | | | | | Adjust the sandbox SPI driver to support driver model and move sandbox over to driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
OpenPOWER on IntegriCloud