summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* video: Drop DEV_EXT_VIDEO flagBin Meng2015-11-051-1/+0
| | | | | | DEV_EXT_VIDEO does not have any actual meaning, hence drop it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* mpc85xx: Add support for the Varisys Cyrus boardAndy Fleming2015-11-041-0/+4
| | | | | | | | | | | This board runs a P5020 or P5040 chip, and utilizes an EEPROM with similar formatting to the Freescale P5020DS. Large amounts of this code were developed by Adrian Cox <adrian at humboldt dot co dot uk> Signed-off-by: Andy Fleming <afleming@gmail.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1Shengzhou Liu2015-11-021-1/+2
| | | | | | | | T2081 rev 1.1 changes MEM_PLL_RAT in RCW which requires new parsing for PLL ratio. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdmZhao Qiang2015-11-022-0/+22
| | | | | | | | | qe-tdm is muxed with diu, if hwconfig setted as qe-tdm, assign muxed pins to qe-tdm, then delete diu node from device tree. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-10-304-897/+1
|\
| * net: Move some header files to include/Shaohui Xie2015-10-294-897/+1
| | | | | | | | | | | | | | | | | | | | The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | arch/powerpc/cpu/ppc4xx/Kconfig: Finish removing boardsTom Rini2015-10-271-16/+0
|/ | | | | | | My patches to drop various ppc4xx boards were not build tested and omitted the Kconfig parts. Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Drop old non-generic-board codeSimon Glass2015-10-191-986/+0
| | | | | | This code is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arch/powerpc/config.mk: Pass -fno-ira-hoist-pressure when possibleTom Rini2015-10-171-1/+2
| | | | | | | | | There are various toolchain issues that cause us to produce invalid binaries with certain gcc 4.8.x and 4.9.x versions when we don't pass this flag in. Tested-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove lcd4_lwmon5 supportStefan Roese2015-10-111-1/+0
| | | | | | | This platform has not gone into production. So lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* Revert "powerpc: ppc4xx: remove lwmon5 support"Stefan Roese2015-10-112-0/+11
| | | | | | | | | | This reverts commit 8fe11b8901a31d11990488c82bc23612589d57be. I'll add support to lwmon5 in the next patch and will remove support for the broken lcd4_lwmon5 as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: mpc85xx: remove stxgp3, stxssa supportMasahiro Yamada2015-09-021-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Dan Malek <dan@embeddedalley.com>
* powerpc: mpc5xx: remove cmi_mpc5xx supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove zeus supportMasahiro Yamada2015-09-022-19/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove sbc405 supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* powerpc: ppc4xx: remove pcs440ep supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove p3p440 supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove lwmon5 supportMasahiro Yamada2015-09-022-11/+0
| | | | | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Remove CONFIG_LWMON5 references. (Also, remove undefined CONFIG_WD_MAX_RATE while I am here.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* powerpc: ppc4xx: remove csb272, csb472 supportMasahiro Yamada2015-09-021-8/+0
| | | | | | | | These have not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tolunay Orkun <torkun@nextio.com>
* powerpc: ppc4xx: remove alpr supportMasahiro Yamada2015-09-021-4/+0
| | | | | | | | This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-09-0213-29/+124
|\
| * net/fman: Support both new and legacy FMan CompatiblesIgal Liberman2015-09-0112-28/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently the FMan Port and MAC compatibles were changed. This patch aligns the FMan Port and MAC compatibles to the new FMan device tree binding document. The FMan device tree binding document can be found in the Linux kernel: ./Documentation/devicetree/bindings/powerpc/fsl/fman.txt This patch doesn't affect legacy compatibles support. Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Tested-by: Xing Lei <xing.lei@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ramYork Sun2015-09-011-1/+9
| | | | | | | | | | | | | | | | | | MPC85xx has been using locked L1 cache as init_ram. L1 cache is a write through cache on E6500. L2 cache is enabled to to hold the data. This patch locks/unlocks L2 cache to ensure no data cast out from L2 cache. Signed-off-by: York Sun <yorksun@freescale.com> Reported-by: Jeffery Zhu <Jefferry.Zhu@freescale.com>
* | SECURE_BOOT: Disable IE Key feature for RAMBOOTAneesh Bansal2015-09-011-2/+4
|/ | | | | | | | | | | | | | ISBC Key Extension feature is not applicable for RAMBOOT as there is no way to retrieve the CSF Header and validated IE Key table from SRAM once CPC has been disabled. The feature is only applicable in case of NOR SECURE BOOT. Code Cleanup: The SECURE_BOOT specific defines have been moved from arch-ls102xa/config.h to arm/include/asm/fsl_secure_boot.h Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Correct License and Copyright information on few filesRuchika Gupta2015-08-121-0/+2
| | | | | | | | | gpio.h - Added missing copyright in few files. rsa-mod-exp.h - Corrected copyright in the file. fsl_sec.h - Added missing license in files drivers/crypto/fsl/Makefile - Removed the incomplete GPLv2 license and replaced it with GPLv2+ license Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-07-316-58/+89
|\
| * powerpc/t4240: update serdes tableShaohui Xie2015-07-311-55/+48
| | | | | | | | | | | | | | | | | | | | Serdes Lanes availability on T4160 and T4080 are same, which serdes 2 & 3 support 8 Lanes, but serdes 1 & 4 support only 4 Lanes E/F/G/H, Lanes A/B/C/D are not available, updated the serdes table accordingly with some minor fix. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAMAneesh Bansal2015-07-311-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | For running Chain of Trust when doing Secure Boot from NAND, the Bootscript header and bootscript must be copied from NAND to RAM(DDR). The addresses and commands for the same have been defined. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal2015-07-312-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUNT for p1025Nikhil Badola2015-07-281-1/+1
| | | | | | | | | | | | | | | | Correct the value CONFIG_USB_MAX_CONTROLLER_COUNT macro to 1 for p1025 as it has one USB controller Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/t1024: update fman liodn for mac1Shengzhou Liu2015-07-282-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | MAC1 acts as 1G/10G dual-role MAC on T1024. We introduce macro SET_FMAN_RX_10G_TYPE2_LIODN for 10G MACs which have same Port ID and same offset of address with 1G MAC. Update it to match with the setting of fman in t1024 device tree, otherwise there is no 'fsl,liodn' in /proc/device-tree/soc@ffe000000/fman@400000/port@88000/ Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana2015-07-282-0/+3
| | | | | | | | | | | | | | | | defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | kbuild: create symbolic link only for ARM, AVR32, SPARC, PowerPC, x86Masahiro Yamada2015-07-271-0/+3
|/ | | | | | | | | | | | | The symbolic link to SoC/CPU specific header directory is created during the build, while it is only necessary for ARM, AVR32, SPARC, x86, and some CPUs of PowerPC. For the other architectures, it just results in a broken symbolic link. Introduce CONFIG_CREATE_ARCH_SYMLINK to not create unneeded symbolic links. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* powerpc: gitignore: ignore PowerPC DTBsMasahiro Yamada2015-05-281-0/+1
| | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arch: Make board selection choices optionalJoe Hershberger2015-05-1210-0/+10
| | | | | | | | | | | | By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* ppc4xx: Remove sc3 boardStefan Roese2015-05-103-13/+1
| | | | | | | | | | | | | | | | As this board seems to be unmaintained for quite some time, and its not moved to the generic board ingrastructure, lets remove it. This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2 and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the only one using one of this macros. A removal patch will follow soon. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Juergen Beisert <jbeisert@eurodsn.de> Acked-by: Heiko Schocher <hs@denx.de>
* powerpc/mpc85xx: Add board support for ucp1020Oleksandr G Zhadan2015-05-041-0/+4
| | | | | | | | | | New QorIQ p1020 based board support from Arcturus Networks Inc. http://www.arcturusnetworks.com/products/ucp1020/ Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> [York Sun: remove patman tags from commit message] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Fix compiling error for common/cmd_gpio.cOleksandr G Zhadan2015-05-042-2/+6
| | | | | | | | | | | | | | | | | | | | To replicate: 1. add to include/configs/p1_p2_rdb_pc.h "#define CONFIG_CMD_GPIO" 2. run `make P1020RDB-PC_defconfig` 3. run CROSS_COMPILE=powerpc-linux- make and you will get: common/built-in.o: In function `do_gpio': u-boot/common/cmd_gpio.c:186: undefined reference to `gpio_request' u-boot/common/cmd_gpio.c:194: undefined reference to `gpio_direction_input' u-boot/common/cmd_gpio.c:195: undefined reference to `gpio_get_value' u-boot/common/cmd_gpio.c:200: undefined reference to `gpio_get_value' u-boot/common/cmd_gpio.c:203: undefined reference to `gpio_direction_output' u-boot/common/cmd_gpio.c:209: undefined reference to `gpio_free Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com> Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add peripheral clock supportYangbo Lu2015-05-042-3/+56
| | | | | | | | | | | | The SD clock could be generated by platform clock or peripheral clock for some platforms. This patch adds peripheral clock support for T1024/T1040/T2080. To enable it, define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mmc: fsl_esdhc: Add adapter card type identification supportYangbo Lu2015-05-041-0/+3
| | | | | | | | | | | | Add adapter card type identification support by reading FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function, define CONFIG_FSL_ESDHC_ADAPTER_IDENT. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Cc: York Sun <yorksun@freescale.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> [York Sun: resolve conflicts in README.fsl-esdhc] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Don't deref NULL if qman portal lacks cell-indexScott Wood2015-05-041-2/+7
| | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: add 2 common dcache assembly functionsValentin Longchamp2015-05-0411-164/+48
| | | | | | | | | | | | | | This patch defines the 2 flush_dcache_range and invalidate_dcache_range functions for all the powerpc architecture. Their implementation is borrowed from the kernel's misc_32.S file and replace the ones from mpc86xx and ppc4xx since they were equivalent. This is a fix for the problem introduced by this patch: http://patchwork.ozlabs.org/patch/448849/ Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/pci: Set CFG_READY for PCIe v3.0 and laterMinghuan Lian2015-05-041-0/+1
| | | | | | | | | | | | | | Freescale PCIe controllers v3.0 and later need to set bit CFG_READY to allow all inbound configuration transactions to be processed normally when in EP mode. However, bit CFG_READY has been moved from PCIe configuration space to CCSR PCIe configuration register comparing previous version. The patch is to set this bit according to PCIe version. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4rdb: Add SD boot support for T4240RDB boardChunhe Lan2015-05-041-0/+1
| | | | | | | | | | | | This patch adds SD boot support for T4240RDB board. SPL framework is used. PBL initializes the internal RAM and copies SPL to it. Then SPL initializes DDR using SPD and copies u-boot from SD card to DDR, finally SPL transfers control to u-boot. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> [York Sun: Fix T4240RDB_SDCARD_defcofig] Reviewed-by: York Sun <yorksun@freescale.com>
* drivers: usb: fsl: Workaround for Erratum A004477Nikhil Badola2015-05-042-0/+10
| | | | | | | | | | Add a delay of 1 microsecond before issuing soft reset to the controller to let ongoing ULPI transaction complete. This prevents corruption of ULPI Function Control Register which eventually prevents phy clock from entering to low power mode Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/T4240EMU: Remove T4240EMU boardYork Sun2015-05-041-3/+0
| | | | | | | T4240 SoC has been available for a long time. Emulator support is no longer needed. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Use GOT when loading IVORs post-relocationScott Wood2015-05-041-15/+20
| | | | | | | | | | | | | | | | | | | | | Commit 96d2bb952bb ("powerpc/mpc85xx: Don't relocate exception vectors") simplified IVOR initialization a bit too much, failing to use the post-relocation offset. This doesn't cause a problem with normal NOR boot, in which both the pre-relocation and post-relocation addresses are 64 KiB aligned. However, if TEXT_BASE is only 4 KiB aligned, such as for NAND/SD/etc. boot on some targets, as well as the QEMU target, the post-relocation address will not be the same in the lower 16 bits, as reserve_uboot() ensures that the relocation address is always 64 KiB aligned even if the pre-relocation address was not. Use the GOT to get the proper post-relocation offsets. Fixes: 96d2bb952bb ("powerpc/mpc85xx: Don't relocate exception vectors") Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Alexander Graf <agraf@suse.de> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Tested-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ifc: Add 64KB page supportJaiprakash Singh2015-04-232-6/+6
| | | | | | | | | | | | | | | | IFC has two register pages.Till IFC version 1.4 each register page is 4KB each.But IFC ver 2.0 register page size is 64KB each.IFC regiters structure is break into two viz FCM and RUNTIME.FCM(Flash control machine) registers are defined in PAGE0 and controls IFC generic functionality. RUNTIME registers are defined in PAGE1 and controls NAND and GPCM funcinality. FCM and RUNTIME structures defination is common for IFC version 1.4 and 2.0. Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* net/memac_phy: reuse driver for little endian SoCsShaohui Xie2015-04-231-264/+0
| | | | | | | | | | | | | The memac for PHY management on little endian SoCs is similar on big endian SoCs, so we modify the driver by using I/O accessor function to handle the endianness, so the driver can be reused on little endian SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access is little endian, if not, the I/O access is big endian. Move fsl_memac.h out of powerpc include. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
* Add bootscript support to esbc_validate.gaurav rana2015-04-211-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | 1. Default environment will be used for secure boot flow which can't be edited or saved. 2. Command for secure boot is predefined in the default environment which will run on autoboot (and autoboot is the only option allowed in case of secure boot) and it looks like this: #define CONFIG_SECBOOT \ "setenv bs_hdraddr 0xe8e00000;" \ "esbc_validate $bs_hdraddr;" \ "source $img_addr;" \ "esbc_halt;" #endif 3. Boot Script can contain esbc_validate commands and bootm command. Uboot source command used in default secure boot command will run the bootscript. 4. Command esbc_halt added to ensure either bootm executes after validation of images or core should just spin. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
OpenPOWER on IntegriCloud