summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* imx: hab: add mx7 secure boot supportAdrian Alonso2015-10-301-2/+4
| | | | | | | | | | | | | Add mx7 secure boot support, add helper macro IS_HAB_ENABLED_BIT to get the corresponding bit mask per SoC (mx7 or mx6) to identify if securue boot feature is enabled/disabled. On authenticate_image only check for mmu enabled on mx6 SoC to force pu_irom_mmu_enabled so ROM code can perform mmu cache flush mx7 SoC ROM code does not have this issue as ROM enables cache support based on fuse settings. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: hab: use read_fuse for secure boot settingsAdrian Alonso2015-10-301-5/+12
| | | | | | | Use read_fuse api fuction call to read secure boot fuse settings (enabled/disabled). Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* arm: imx: add secure boot fuse details for imx7 SoCAdrian Alonso2015-10-301-0/+8
| | | | | | | Add secure boot fuse details (location) bank = 1, word = 3; for imx7 SoC platforms. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* arm: imx: add secure boot fuse details for imx6 SoCAdrian Alonso2015-10-301-0/+8
| | | | | | | Add secure boot fuse details (location) bank = 0, word = 6; for imx6 SoC platforms. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: hab: add secure boot fuse detailsAdrian Alonso2015-10-301-0/+9
| | | | | | | Add secure boot fuse helper struct to abstract the way to find out secure boot settings per SoC iMX family Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: hab: rework unified rom section for mx7Adrian Alonso2015-10-301-0/+2
| | | | | | | Rework unified section macro select via Kconfig option instead of macro definition in mx7_common header file. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: hab: use unified rom section for mx6sx and mx6ulAdrian Alonso2015-10-303-1/+6
| | | | | | | | | Add CONFIG_ROM_UNIFIED_SECTIONS for mx6sx and mx6ul target platforms to resolve corresponding HAB_RVT_BASE base address, the RVT table contains pointers to the HAB API functions in ROM code. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: hab: rework secure boot support for imx6Adrian Alonso2015-10-304-2/+2
| | | | | | | Rework secure boot support for imx6, move existing hab support for imx6 into imx-common for SoC reuse. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* imx: cpu: move common chip revision id'sAdrian Alonso2015-10-305-19/+13
| | | | | | | Move common chip revision id's to main cpu header file mx25 generic include cpu header for chip revision Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* arm, imx: add some gpr register definesHeiko Schocher2015-10-301-0/+35
| | | | | | add some missing gpr register defines. Signed-off-by: Heiko Schocher <hs@denx.de>
* imx-common: timer: clean up codePeng Fan2015-10-301-73/+2
| | | | | | | | | | | We can reuse common functions in lib/time.c, but not reimplement functions in imx-common/time.c. Only keep timer_init ,get_tbclk and implement timer_read_counter in imx-common/time.c. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* dts: zed: Enable zynq qspi controller nodeJagan Teki2015-10-251-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zed board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc770-xm010: Enable zynq qspi controller nodeJagan Teki2015-10-251-1/+6
| | | | | | | | | | | | Enabled zynq qspi controller node for zc770-xm010 board. => sf probe 0 -- bus1 for selecting qspi controller => sf probe 1 -- bus0 for selecting spi controller Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc706: Enable zynq qspi controller nodeJagan Teki2015-10-251-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zc706 board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: zc702: Enable zynq qspi controller nodeJagan Teki2015-10-251-0/+5
| | | | | | | | | Enabled zynq qspi controller node for zc702 board. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dts: microzed: Enable zynq qspi controller nodeJagan Teki2015-10-251-0/+5
| | | | | | | | | | | Enabled zynq qspi controller node for microzed board, verified the same on spansion spi-nor flash. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* dts: zynq: Add zynq qspi controller nodesJagan Teki2015-10-251-0/+12
| | | | | | | | | | This patch adds zynq qspi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
* arm, powerpc: select SYS_GENERIC_BOARDMasahiro Yamada2015-10-241-1/+0
| | | | | | | | | | | We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* zynq: Move SPL console init out of board_init_f()Simon Glass2015-10-241-1/+1
| | | | | | | | | | | | | | We should not init the console this early since it precludes using driver model for the UART, since it is not set up at the start of board_init_f(). See the README for more information. The debug UART does not have this restriction. If we want to do early init with the console on it can be done in spl_board_init(). Move the preloader_console_init() call from board_init_f() to board_init_r(). Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
* arm: Switch 32-bit ARM to using generic global_data setupSimon Glass2015-10-241-24/+4
| | | | | | | | | | There is quite a bit of assembler code that can be removed if we use the generic global_data setup. Less arch-specific code makes it easier to add new features and maintain the start-up code. Drop the unneeded code and adjust the hooks in board_f.c to cope. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Switch aarch64 to using generic global_data setupSimon Glass2015-10-241-12/+3
| | | | | | | | | | | | | There is quite a bit of assembler code that can be removed if we use the generic global_data setup. Less arch-specific code makes it easier to add new features and maintain the start-up code. Drop the unneeded code and adjust the hooks in board_f.c to cope. Tested on LS2085ARDB and LS2085AQDS (armv8 SoC). Tested-by: York Sun <yorksun@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* am437x: Add am57xx_evm_defconfig using CONFIG_DMMugunthan V N2015-10-222-0/+700
| | | | | | | | | Import various DT files for am57xx-beagle-x15 from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* am437x: Add am437x_sk_evm_defconfig using CONFIG_DMMugunthan V N2015-10-222-1/+705
| | | | | | | | | Import various DT files for am437x-sk-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* am437x: Add am437x_gp_evm_defconfig using CONFIG_DMMugunthan V N2015-10-224-0/+2554
| | | | | | | | | | Import various DT files for am4372, an43xx pinctrl and am437x-gp-evm from Linux Kernel v4.2 Add config file for this board, enable DM, DM_GPIO, DM_SERIAL and DM_MMC. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* omap_hsmmc: update struct hsmmc to accomodate base address from DTMugunthan V N2015-10-221-0/+3
| | | | | | | | | | Existing driver gets the actual omap hammc base address + 0x100 bytes as the first 0x100 bytes is not used by the driver. But with DM conversion the base address from DT is different, to accommodate the offset adding res0[0x100] to struct hsmmc. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* dra7xx: Add dra74_evm_defconfig using CONFIG_DMMugunthan V N2015-10-223-1/+784
| | | | | | | | Import various DT files for dra7-evm from Linux Kernel v4.2 Add config file for this board, enable DM and DM_GPIO Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: k2g: Add DT supportLokesh Vutla2015-10-223-1/+95
| | | | | | Add basic DT support for k2g evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: add SD card and eMMC supportRoger Quadros2015-10-221-0/+22
| | | | | | | | Add MMC support for k2g Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
* driver: net: keystone_net: add support for rgmii phyVitaly Andrianov2015-10-221-0/+5
| | | | | | | | | In K2G, Ethernet doesn't support SGMII instead it support RGMII, adding support to the driver to connect to RGMII phy. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* driver: net: keystone_net: fix phy mode configurationMugunthan V N2015-10-221-0/+2
| | | | | | | | | | Phy mode is a board property and it can be different between multiple board and ports, so it should not be hardcoded in driver to one specific mode. So adding a field in eth_priv_t structure to pass phy mode to driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: update keystone nav rx queue numbersVitaly Andrianov2015-10-221-0/+5
| | | | | | | | update K2G nav rx queue number Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Correct base addressesVitaly Andrianov2015-10-223-0/+57
| | | | | | | | Coreect base addresses for SPI, Queue Manager, Ethernet, GPIO, and MSMC segments. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add support for pin mux configurationVitaly Andrianov2015-10-221-0/+58
| | | | | | | Add api for configuring pin mux. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add ddr3 infoVitaly Andrianov2015-10-222-1/+15
| | | | | | | Add ddr3 related info Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add PSC infoVitaly Andrianov2015-10-222-0/+55
| | | | | | | Add psc information for k2g Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add clock informationVitaly Andrianov2015-10-225-2/+14
| | | | | | | | Add clock information for Galileo Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* ARM: k2g: Add pll dataVitaly Andrianov2015-10-224-0/+31
| | | | | | | Add pll data for k2g Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add kconfig supportLokesh Vutla2015-10-221-0/+3
| | | | | | Add Kconfig support Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: k2g: Add support for CPU detectionLokesh Vutla2015-10-222-0/+9
| | | | | | Adding CPU detection support for Keystone2 Galileo. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: keystone2: Use dtb images by defaultLokesh Vutla2015-10-221-2/+2
| | | | | | | Now that OF_CONTROL is enabled on all keystone2 platforms, build the default images with DT. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2e: Enable OF_CONTROL and DMLokesh Vutla2015-10-225-1/+586
| | | | | | | Import k2e specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2l: Enable OF_CONTROL and DMLokesh Vutla2015-10-225-1/+696
| | | | | | | Import k2l specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: k2hk: Enable OF_CONTROL and DMLokesh Vutla2015-10-226-0/+935
| | | | | | | Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: keystone2: Do not use LPAE addresses in U-BootLokesh Vutla2015-10-221-9/+8
| | | | | | | | Keystone dts files assumes that LPAE is enabled and top level root node uses 64bit addresses. This breaks the keystone boot with CONFIG_OF_CONTROL enabled. So do not use 64 bit addresse in U-Boot DT. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: Keystone2: Import generic dt files from Linux KernelLokesh Vutla2015-10-222-0/+738
| | | | | | | Import various generic dts files from Linux kernel so that all keystone2 platforms can be DT in U-boot. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: keystone2: Fix serial port initLokesh Vutla2015-10-221-0/+2
| | | | | | | | With CONFIG_DM_SERIAL is enabled NS16550_init() cannot be called directly. Driver probe should be taking care of this. So call this function only when DM_SERIAL is not enabled. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* omap-common: Common get_board_serial function to pass serial through ATAGPaul Kocialkowski2015-10-222-0/+19
| | | | | | | | | Since there is a common function to grab the serial number from the die id bits, it makes sense have one to parse that serial number and feed it to the serial ATAG. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common function to display die id, replacing omap3-specific versionPaul Kocialkowski2015-10-225-24/+12
| | | | | | | | | This introduces omap_die_id_display to display the full die id. There is no need to store it in an environment variable, that no boot script is using anyway. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap-common: Common serial and usbethaddr functions based on die idPaul Kocialkowski2015-10-222-24/+30
| | | | | | | | | Now that we have a common prototype to grab the omap die id, functions to figure out a serial number and usb ethernet address can use it directly. Those also get an omap_die_id prefix for better consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
* omap5: omap_die_id supportPaul Kocialkowski2015-10-222-0/+12
| | | | | | | | This introduces omap5 support for omap_die_id, which matches the common omap_die_id definition. It replaces board-specific code to grab the die id bits. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
OpenPOWER on IntegriCloud