summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* ARM: Use consistent assembler syntaxGray Remlin2010-10-263-15/+15
| | | | | Signed-off-by: Gray Remlin <g_remlin@rocketmail.com> Acked-by: Heiko Schocher <hs@denx.de>
* ARM: fix relocation support for onenand device.Enric Balletbo i Serra2010-10-231-0/+3
| | | | | | | We also have to relocate the onenand command table manually, otherwise onenand command don't work. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
* Merge branch 'for-wd-master' of git://git.denx.de/u-boot-pxaWolfgang Denk2010-10-232-88/+80
|\
| * PXA: Use pxa-regs.h register definitions in start.SMarek Vasut2010-10-221-12/+8
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Implement ELF relocationMarek Vasut2010-10-222-76/+72
| | | | | | | | | | | | Based on patch by: Albert Aribaud <albert.aribaud@free.fr> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* | MX51: Add IPU driver for video supportStefano Babic2010-10-221-0/+11
|/ | | | | | | | | | | | The patch is a porting of the IPU Linux driver developed by Freescale to have framebuffer functionalities in u-boot. The port is based on kernel 2.6.31 commit cc4fe714041805997b601fe8e5dd585d8a99297f, as delivered by Freescale [i.MX BSP]. Most features are dropped from the original driver and only LCD support is the goal of this porting. Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX31: Removed warnings for iomux functionStefano Babic2010-10-202-4/+4
| | | | | | Removed warnings generated in the mx31_set_pad() function. Signed-off-by: Stefano Babic <sbabic@denx.de>
* PXA: Fix reloc, Push lowlevel init into C codeMarek Vasut2010-10-192-214/+359
| | | | | | | | | | | | | | Firstly, this fixes relocation issues. I had to use part of Dcache as RAM for a while. I also moved around the lowlevel init code. It turned out so most of the lowlevel init code ended in cpu.c (and eventually was rewritten into C). This will also allow easier operation with FDT, multi-CPU-model support etc. in later releases. NOTE: This breaks most of the PXA boards (actually, the reloc stuff did already, this only finishes the doom). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: fix MDREFR[APD] bit settingMikhail Kshevetskiy2010-10-191-8/+12
| | | | | | | | | pxa_mem_setup macro use r6 to store CONFIG_SYS_MDREFR_VAL during memory initialization. This reg is modified during execution of pxa_wait_ticks. Later we use r6 to setup MDREFR[APD] bit. As result MDREFR[APD] is always zero. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
* PXA: pxafb: Marvell Littleton LCD definitionMarek Vasut2010-10-191-0/+33
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: pxafb: Add support for Sharp LQ038J7DH53Marek Vasut2010-10-191-0/+34
| | | | | | This LCD panel is found in Palm LifeDrive handheld Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: pxafb: Add ACX517AKN supportMarek Vasut2010-10-191-0/+34
| | | | | | ACX517AKN LCD panel is found in Palm Tungsten|C Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: pxa-regs.h cleanupMarek Vasut2010-10-197-1417/+1561
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: pxafb: Fix indent problemsMarek Vasut2010-10-191-100/+100
| | | | | | Also change the initializer style Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-194-71/+84
|\
| * AT91 clock/timer: move static data to global_data structReinhard Meyer2010-10-193-71/+83
| | | | | | | | | | | | | | | | clock.c / timer.c used static data and are called before relocation. Move all static variables into global_data structure. Also cleanup timer.c from unused stubs and make it truly use 64 bit tick values. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * at91rm9200: enable USB supportAndreas Bießmann2010-10-191-0/+1
| | | | | | | | | | | | | | | | This patch fixes arch-at91/hardware.h to have the relevant defines for at91rm9200 devices to support existing at91 usb driver. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* | Merge branch 'elf_reloc'Wolfgang Denk2010-10-1911-239/+312
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | arm1136, qong: add support for ELF relocationsHeiko Schocher2010-10-132-78/+108
| | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Albert ARIBAUD <albert.aribaud@free.fr>
| * | armv7, beagle: add support for ELF relocationsHeiko Schocher2010-10-133-54/+86
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * | arm926ejs, tx25: add support for ELF relocationsHeiko Schocher2010-10-132-4/+6
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * | arm: implement ELF relocationsAlbert Aribaud2010-10-136-108/+116
| | | | | | | | | | | | | | | | | | | | | | | | ELF relocation tables generated with linker option -pie can be used to fixup code and data in a single loop at relocation, removing the need for manual fixups anywhere else in the code. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
* | | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-1915-58/+50
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | MX5: Remove dead code with ENABLE_IMPRECISE_ABORTJason Liu2010-10-191-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This code section is dead due to we never define ENABLE_IMPRECISE_ABORT for MX5 Signed-off-by: Jason Liu <r64343@freescale.com>
| * | | MX5: rename mx51 to mx5Jason Liu2010-10-1815-44/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343@freescale.com>
* | | | ARM: add flat device tree supportJohn Rigby2010-10-182-16/+123
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | Based on other architectures already supported. Tested on OMAP3 Beagle board and another unnamed ARM platform. Signed-off-by: John Rigby <john.rigby@linaro.org> Tested-by: Rob Herring <rob.herring@smooth-stone.com> Acked-by: Wolfgang Denk <wd@denx.de>
* | | Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEWolfgang Denk2010-10-1818-26/+26
|/ / | | | | | | | | | | | | | | | | | | | | | | The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | OMAP3: SDRC: Introduce Numonyx DDR typeEnric Balletbo i Serra2010-10-171-0/+43
| | | | | | | | | | | | | | | | | | | | Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDPSteve Sakoman2010-10-171-0/+5
| | | | | | | | | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
* | ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()Steve Sakoman2010-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a typo in the routine to calculate the cs offset based upon the contents of the SDRC cs_cfg register. This function mistakenly shifts the CS1STARTLOW field 17 bits right instead of 17 bits left. This hasn't been an issue to date because all OMAP3 boards currently are configured to have zeros in this field. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
* | ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMCSukumar Ghorai2010-10-172-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | OMAP boards currently use a legacy mmc driver. This patch adds a new mmc driver which will work with the generic mmc driver in u-boot. This new driver will work with both OMAP3 and OMAP4 boards. This patch does not remove the old driver. It should remain in the tree until all boards that use it switch to the new driver. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-172-0/+428
|\ \
| * | MX31: add support for setting pin padsStefano Babic2010-10-132-0/+421
| | | | | | | | | | | | | | | | | | | | | The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | MX31: Adding missing iomux pin to MX.31 registersStefano Babic2010-10-131-0/+7
| | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | env_mmc: Fix crashing bug encountered after enabling ARM relocationSteve Sakoman2010-10-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-1339-383/+493
|\ \ \ | | |/ | |/|
| * | ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-133-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * | arch/arm/include/asm/sizes.h: cleanupsAndreas Bießmann2010-10-136-206/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | Kirkwood: dram_init is moved to dram.cPrafulla Wadaskar2010-10-131-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | orion5x: optimize window size computationAlbert Aribaud2010-10-131-11/+21
| | | | | | | | | | | | | | | Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar2010-10-132-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | orion5x: fix relocation-incompatible codeAlbert Aribaud2010-10-113-31/+54
| | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | arm: bugfix: replace ble with blo in start.S filesAlbert Aribaud2010-10-1114-68/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generalized misuse of ble within relocation and bss initialization loops caused one iteration too many. Instead of ble ('branch if lower or equal'), use blo ('branch if lower'). While we're at it, fix all 'addreee' typos. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-112-21/+29
| |\ \ | | |/ | |/|
| | * at91: Add arch_preboot_os which disables PIT in a faster wayAlexander Stein2010-10-051-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disabled the PIT runs until it reaches the CPIV value. The Linux PIT driver stops the PIT and waits until it stopped. This can take over 100ms. Simply stopping in u-boot isn't sufficient as the PIT will still be running when Linux is waiting until it stopped. So, we stop it in u-boot by setting the compare value to a value slightly greater than the current running counter to make the PIT stopped in short time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
| | * at91_emac.h: fix typo in register definitionAndreas Bießmann2010-10-051-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig <js_at_ng@scharsoft.de>
| | * AT91: convert cpu.c to struct SoC accessReinhard Meyer2010-10-051-20/+12
| | | | | | | | | | | | Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | MX51: Register definitions cannot be included in board config fileStefano Babic2010-09-301-4/+6
| | | | | | | | | | | | | | | | | | | | | Due to wrong dependencies, it is not possible to include imx_regs.h inside the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | MX51: add structure to access System Reset ControllerStefano Babic2010-09-291-0/+10
| | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | MX51: Added pins definition to set up padsStefano Babic2010-09-291-0/+44
| | | | | | | | | | | | | | | | | | | | | Add pins definitions to set up RAM pads. Pins have only a pad, there is no entry in the multiplexer. Signed-off-by: Stefano Babic <sbabic@denx.de>
OpenPOWER on IntegriCloud