summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-uniphier/ph1-pro4
Commit message (Collapse)AuthorAgeFilesLines
* ARM: UniPhier: reset NAND core in SPL for non-NAND boot modeMasahiro Yamada2015-03-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | For all the UniPhier SoCs so far, the reset signal of the NAND core is automatically deasserted after the PLL gets stabled. (The bit 2 of SC_RSTCTRL is default to one.) This causes a fatal problem on the NAND controller of PH1-LD4. For that SoC, the NAND I/O pins are not set up yet at the power-on reset except the NAND boot mode. As a result, the NAND controller begins automatic device scanning with wrong I/O pins and finally hangs up. Actually, U-Boot dies after printing "NAND:" on the console unless the boot mode latch detected the NAND boot mode. To work around this problem, reset the NAND core in SPL for non-NAND boot modes. If CONFIG_NAND_DENALI is enabled, the reset signal is deasserted again in U-Boot proper. At this time, I/O pins have been correctly set up, the device scanning should succeed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: split clkrst_init() into two functionsMasahiro Yamada2015-03-013-8/+44
| | | | | | | | | | | | | | Split the current clkrst_init() into two functions: - early_clkrst_init(): called from SPL Deassert the reset signals of the memory controller and some other basic cores. - clkrst_init(): called from main U-boot Deassert the reset signals that are necessary for the access to peripherals etc. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: rename SC_CLKCTRL_CLK_* to SC_SCLKCTRL_CEN_*Masahiro Yamada2015-03-012-3/+3
| | | | | | Follow the register macros in the LSI specification book. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: fix SBC init codeMasahiro Yamada2015-03-011-5/+5
| | | | | | | | | Now UniPhier SoCs only work with CONFIG_SPL and the function sbc_init() is called from SPL. The conditional #if !defined(CONFIG_SPL_BUILD) has no point any more. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: fix comments in PH1-Pro4 SBC codeMasahiro Yamada2015-03-011-3/+3
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: include <mach/*.h> instead of <asm/arch/*.h>Masahiro Yamada2015-03-0111-18/+18
| | | | | | | | | Since commit 0e7368c6c426 (kbuild: prepare for moving headers into mach-*/include/mach), we can replace #include <asm/arch/*.h> with <mach/*.h> so we do not need to create the symbolic link during the build. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* ARM: UniPhier: move SoC sources to mach-uniphierMasahiro Yamada2015-03-0112-0/+740
Move arch/arm/cpu/armv7/uniphier/* -> arch/arm/mach-uniphier/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
OpenPOWER on IntegriCloud