summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra
Commit message (Collapse)AuthorAgeFilesLines
...
* Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.Tom Warren2015-08-059-145/+260
| | | | | | | | | | | | | Added PLL variables (dividers mask/shift, lock enable/detect, etc.) to new pllinfo struct for each Soc/PLL. PLLA/C/D/E/M/P/U/X. Used pllinfo struct in all clock functions, validated on T210. Should be equivalent to prior code on T124/114/30/20. Thanks to Marcel Ziswiler for corrections to the T20/T30 values. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: clocks: Add 38.4MHz OSC support for T210 useTom Warren2015-08-053-6/+27
| | | | | | | | | | | | | | | Added 38.4MHz/48MHz entries to pll_x_table for CPU PLL. Needs to be measured - should be close to 700MHz (1.4G/2). Note that some freqs aren't in the PLLU table in T210 TRM (13, 26MHz), so I used the 12MHz table entry for them. They shouldn't be selected since they're not viable T210 OSC freqs. Since there are now 2 new OSC defines, all tables (pll_x_table, PLLU) had to increase by two entries, but since 38.4/48MHz are not viable osc freqs on T20/30/114, etc, they're just set to 0. Signed-off-by: Tom Warren <twarren@nvidia.com>
* T210: P2571: Turn CPU fan onTom Warren2015-08-051-0/+3
| | | | | | | | CPU board (E2530) has a fan - turn it on via GPIO to keep the SoC cool. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* T210: Add support for 64-bit T210-based P2571 boardTom Warren2015-07-281-0/+7
| | | | | | | | | | | Based on Venice2, incorporates Stephen Warren's latest P2571 pinmux table. With Thierry Reding's 64-bit build fixes, this will build and and boot in 64-bit on my P2571 (when used with a 32-bit AVP loader). Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Tegra210: Add support to common Tegra source/config filesTom Warren2015-07-289-25/+125
| | | | | | | | | | | Derived from Tegra124, modified as appropriate during T210 board bringup. Cleaned up debug statements to conserve string space, too. This also adds misc 64-bit changes from Thierry Reding/Stephen Warren. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: Tegra210: Add SoC code/include files for T210Tom Warren2015-07-285-0/+1648
| | | | | | | | | | | All based off of Tegra124. As a Tegra210 board is brought up, these may change a bit to match the HW more closely, but probably 90% of this is identical to T124. Note that since T210 is a 64-bit build, it has no SPL component, and hence no cpu.c for Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra: Rework KConfig options to allow 64-bit builds (T210)Tom Warren2015-07-281-0/+18
| | | | | | | | | | Moved Tegra config options to mach-tegra/Kconfig so that both 32-bit and 64-bit builds can co-exist for Tegra SoCs. T210 will be 64-bit only (no SPL) and will require a 32-bit AVP/BPMP loader. Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra210: Fix 64-bit build warning about save_boot_params_ret()Tom Warren2015-07-281-0/+2
| | | | | | | | Simon's 'tegra124: Implement spl_was_boot_source()' needs a prototype for save_boot_params_ret() to build cleanly for 64-bit Tegra210. Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Initialize timer earlierThierry Reding2015-07-282-6/+6
| | | | | | | | | | | | | A subsequent patch will enable the use of the architected timer on ARMv8. Doing so implies that udelay() will be backed by this timer implementation, and hence the architected timer must be ready when udelay() is first called. The first time udelay() is used is while resetting the debug UART, which happens very early. Make sure that arch_timer_init() is called before that. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Use standard cache enable for 64-bitThierry Reding2015-07-281-1/+1
| | | | | | | | | On 64-bit SoCs the I-cache isn't enabled in early code, so the default cache enable functions for 64-bit ARM can be used. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: Restrict usable RAM to 32-bit on 64-bit SoCsThierry Reding2015-07-281-0/+16
| | | | | | | | | | | | | | | Most peripherals on Tegra can do DMA only to the lower 32-bit address space, even on 64-bit SoCs. This limitation is typically overcome by the use of an IOMMU. Since the IOMMU is not entirely trivial to set up and serves no other purpose (I/O protection, ...) in U-Boot, restrict 64-bit Tegra SoCs to the lower 32-bit address space for RAM. This ensures that the physical addresses of buffers that are programmed into the various DMA engines are valid and don't alias to lower addresses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* ARM: tegra: Build warning fixes for 64-bitThierry Reding2015-07-272-3/+3
| | | | | | | | Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> [swarren, stripped out changes not strictly related to warnings] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* tegra124: Implement spl_was_boot_source()Simon Glass2015-07-271-0/+16
| | | | | | | Add an implementation of this function for Tegra. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Move default y configs out of arch/board KconfigJoe Hershberger2015-06-251-12/+0
| | | | | | | | | | | | | | | | | | | Some archs/boards specify their own default by pre-defining the config which causes the Kconfig system to mix up the order of the configs in the defconfigs... This will cause merge pain if allowed to proliferate. Remove the configs that behave this way from the archs. A few configs still remain, but that is because they only exist as defaults and do not have a proper Kconfig entry. Those appear to be: SPIFLASH DISPLAY_BOARDINFO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates, drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM] Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: usb: tegra: Drop legacy USB codeSimon Glass2015-06-101-3/+0
| | | | | | Drop the code that doesn't use driver model for USB. Signed-off-by: Simon Glass <sjg@chromium.org>
* dts: Disable device tree for SPL on all boardsSimon Glass2015-06-101-0/+3
| | | | | | | We plan to enable device tree in SPL by default. Before doing this, explicitly disable it for all boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: tegra: usb: Move USB to driver modelSimon Glass2015-06-102-0/+5
| | | | | | | | | | Somehow this change was dropped in the various merges. I noticed when I came to turn off the non-driver-model support for Tegra. We need to make this change (and deal with any problems) before going further. Change-Id: Ib9389a0d41008014eb0df0df98c27be65bc79ce6 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
* tegra: Replace 'Norrin' with 'Nyan-big' and fix typoSimon Glass2015-06-091-1/+1
| | | | | | | | With the rename the MAINTAINER file was not updated. Fix it and the 'Chrombook' typo in Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Allow board-specific initSimon Glass2015-06-091-2/+6
| | | | | | | Add a hook to allows boards to add their own init to board_init(). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Add missing tegra124 peripheralsSimon Glass2015-06-091-1/+1
| | | | | | | There are some missing entries in the tables. Add them. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Introduce SRAM repair on tegra124Simon Glass2015-06-091-1/+19
| | | | | | | | This is required in order to avoid instability when running from caches after the kernel starts. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: clock: Adjust PLL access to avoid a warningSimon Glass2015-06-091-2/+5
| | | | | | | | A harmless but confusing warning is displayed when looking up the DisplayPort PLL. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: clock: Support enabling external clocksSimon Glass2015-06-091-0/+17
| | | | | | | Add a simple function to enable external clocks. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: move NVIDIA common files to arch/arm/mach-tegraMasahiro Yamada2015-05-134-1/+326
| | | | | | | | | | | | | | | | | | | | | All the Tegra boards borrow the files from board/nvidia/common/ directory, i.e., board/nvidia/common/* are not vendor-common files, but SoC-common files. Move NVIDIA common files to arch/arm/mach-tegra/ to clean up Makefiles. As arch/arm/mach-tegra/board.c already exists, this commit renames board/nvidia/common/board.c to arch/arm/mach-tegra/board2.c, expecting they will be consolidated as a second step. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* jetson-tk1: Add PSCI configuration options and reserve secure codeIan Campbell2015-05-131-0/+2
| | | | | | | | | | | | | | The secure world code is relocated to the MB just below the top of 4G, we reserve it in the FDT (by setting CONFIG_ARMV7_SECURE_RESERVE_SIZE) but it is not protected in h/w. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable SMMU when going non-secureThierry Reding2015-05-131-0/+40
| | | | | | | | | | | | | Make sure to enable the SMMU when booting the kernel in non-secure mode. This is necessary because some of the SMMU registers are restricted to TrustZone-secured requestors, hence the kernel wouldn't be able to turn the SMMU on. At the same time, enable translation for all memory clients for the same reasons. The kernel will still be able to control SMMU IOVA translation using the per-SWGROUP enable bits. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Set CNTFRQ for secondary CPUsJan Kiszka2015-05-131-0/+13
| | | | | | | | | | | | | | | We only set CNTFRQ in arch_timer_init for the boot CPU. But this has to happen for all cores. Fixing this resolves problems of KVM with emulating the generic timer/counter. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0Ian Campbell2015-05-131-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | These registers can be used to prevent non-secure world from accessing a megabyte aligned region of RAM, use them to protect the u-boot secure monitor code. At first I tried to do this from s_init(), however this inexplicably causes u-boot's networking (e.g. DHCP) to fail, while networking under Linux was fine. So instead I have added a new weak arch function protect_secure_section() called from relocate_secure_section() and reserved the region there. This is better overall since it defers the reservation until after the sec vs. non-sec decision (which can be influenced by an envvar) has been made when booting the os. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> [Jan: tiny style adjustment] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra124: Add PSCI support for Tegra124Jan Kiszka2015-05-134-0/+168
| | | | | | | | | | | | | | | This is based on Thierry Reding's work and uses Ian Campell's preparatory patches. It comes with full support for CPU_ON/OFF PSCI services. The algorithm used in this version for turning CPUs on and off was proposed by Peter De Schrijver and Thierry Reding in http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/210881. It consists of first enabling CPU1..3 via the PMC, just to powergate them again with the help of the Flow Controller. Once the Flow Controller is in place, we can leave the PMC alone while processing CPU_ON and CPU_OFF PSCI requests. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Make tegra_powergate_power_on publicJan Kiszka2015-05-131-1/+1
| | | | | | | | | | | Will be used for unpowergating CPUs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Move display controller header into commonSimon Glass2015-05-131-1/+1
| | | | | | | Allow this to be used by other Tegra SoCs. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra124: clock: Add display clocks and functionsSimon Glass2015-05-132-5/+138
| | | | | | | | Add functions to provide access to the display clocks on Tegra124 including setting the clock rate for an EDP display. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: clock: Split the clock source code into a separate functionSimon Glass2015-05-131-22/+29
| | | | | | | | | Create a function which sets the source clock for a peripheral, given the number of mux bits to adjust. This can then be used more generally. For now, don't export it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: clock: Add checking for invalid clock IDsSimon Glass2015-05-131-4/+26
| | | | | | | | | The get_pll() function can do the wrong thing if passed values that are out of range. Add checks for this and add a function which can return a 'simple' PLL. This can be defined by SoCs with their own clocks. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Move checkboard() into the board codeSimon Glass2015-05-131-8/+0
| | | | | | | | This is only used by Nvidia boards, so move it into nvidia/common to simplify things. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: pwm: Allow the clock rate to be left as isSimon Glass2015-05-131-1/+4
| | | | | | | | When enabling a PWM, allow the existing clock rate and source to stand unchanged. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Move the pwm into tegra-commonSimon Glass2015-05-133-2/+2
| | | | | | | | This is needed for tegra124 also, so make it common and add a header file for tegra124. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arch: Make board selection choices optionalJoe Hershberger2015-05-125-0/+5
| | | | | | | | | | | | By making the board selections optional, every defconfig will include the board selection when running savedefconfig so if a new board is added to the top of the list of choices the former top's defconfig will still be correct. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Tom Rini <trini@konsulko.com>
* dm: select CONFIG_DM* optionsMasahiro Yamada2015-04-181-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-04-035-3/+274
|\ | | | | | | | | | | | | Conflicts: board/armltd/vexpress64/vexpress64.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * tegra: pinmux: fix FUNCMUX_NDFLASH_KBC_8_BITLucas Stach2015-03-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even the 8-bit case needs KBCB configured, as pin D7 is located in this pingroup. Please note that pingroup ATC seems to come out of reset with its config set to NAND so one needs to explicitly configure some other function to this group in order to avoid clashing settings which is outside the scope of this patch. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: rename colibri_t20 board/configuration/device-treeMarcel Ziswiler2015-03-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | In accordance with our other modules supported by U-Boot and as agreed upon for Apalis/Colibri T30 get rid of the carrier board in the board/ configuration/device-tree naming. While at it also bring the prompt more in line with our other products. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: enable MIPI PAD CTRL support for Tegra124Stephen Warren2015-03-301-0/+17
| | | | | | | | | | | | | | This allows selection between CSI and DSI_B on the MIPI pads. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: pinctrl: add support for MIPI PAD control groupsStephen Warren2015-03-301-0/+57
| | | | | | | | | | | | | | | | Some pinmux controls are in a different register set. Add support for manipulating those in a similar way to existing pins/groups. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: pinctrl: minor cleanupStephen Warren2015-03-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | Move struct pmux_pingrp_desc type and tegra_soc_pingroups variable declaration together with other pin/mux level definitions. Now the whole file is grouped/ordered pin/mux-related then drvgrp-related definitions. Fix typo in ifdef comment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: pinctrl: move Tegra210 code to the correct dirStephen Warren2015-03-301-0/+195
| | | | | | | | | | | | | | | | | | | | | | Patches that added the Tegra210 pinctrl driver and renamed directories arch/arm/cpu/tegra{$soc}-common -> arch/arm/mach-tegra/tegra-${soc} crossed. Move the Tegra210 pinctrl driver to the correct location. This wasn't detected since Tegra210 support is in the process of being added, and isn't buildable yet. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | malloc_f: enable SYS_MALLOC_F by default if DM is onMasahiro Yamada2015-03-281-3/+0
|/ | | | | | | | | | | | | | This option has a bool type, not hex. Fix it and enable it if CONFIG_DM is on because Driver Model always requires malloc memory. Devices are scanned twice, before/after relocation. CONFIG_SYS_MALLOC_F should be enabled to use malloc memory before relocation. As it is board-independent, handle it globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Robert Baldyga <r.baldyga@samsung.com>
* remove unnecessary version.h includesRob Herring2015-03-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various files are needlessly rebuilt every time due to the version and build time changing. As version.h is not actually needed, remove the include. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Tom Warren <twarren@nvidia.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Macpaul Lin <macpaul@andestech.com> Cc: Wolfgang Denk <wd@denx.de> Cc: York Sun <yorksun@freescale.com> Cc: Stefan Roese <sr@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Philippe Reynes <tremyfr@yahoo.fr> Cc: Eric Jarrige <eric.jarrige@armadeus.org> Cc: "David Müller" <d.mueller@elsoft.ch> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Robert Baldyga <r.baldyga@samsung.com> Cc: Torsten Koschorrek <koschorrek@synertronixx.de> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-03-103-35/+250
|\ | | | | | | | | | | | | Conflicts: README Signed-off-by: Tom Rini <trini@konsulko.com>
| * ARM: tegra: pinmux: support Tegra210's e_io_hv pin optionStephen Warren2015-03-041-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra210 has a per-pin option named e_io_hv, which indicates that the pin's input path should be configured to be 3.3v-tolerant. Add support for this. Note that this is very similar to previous chip's rcv_sel option. However, since the Tegra TRM names this option differently for the different chips, we support the new name so that the code exactly matches the naming in the TRM, to avoid confusion. This patch incorporates a few fixes from Tom Warren <twarren@nvidia.com>. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
OpenPOWER on IntegriCloud