summaryrefslogtreecommitdiffstats
path: root/arch/arm/include/asm
Commit message (Collapse)AuthorAgeFilesLines
* arm: omap5: tps659038: rename regulator definesFelipe Balbi2014-12-041-5/+5
| | | | | | | | | Those regulators don't have any coupling with what they supply, so remove the suffixes in order to not confuse anybody. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2014-11-271-0/+6
|\
| * ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROLMasahiro Yamada2014-11-281-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. It includes <asm/gpio.h> and then <asm/gpio.h> includes <asm/arch/gpio.h>. Consequently, all the SoCs that enable CONFIG_OF_CONTROL must have <asm/arch/gpio.h> even if they do not support GPIO. In the first place, GPIO has nothing to do with OF_CONTROL. It is wrong that lib/fdtdec.c includes GPIO functions; it should be split into two files, FDT-common things and GPIO things. It is, however, a pretty big work to fix that correctly. This is a compromised commit to add a dummy <asm/arch/gpio.h> to support OF_CONTROL for UniPhier platform. This dummy header will be removed after FDT-GPIO stuff is fixed correctly. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | mtd: nand: s3c: Unify the register definition and namingMarek Vasut2014-11-263-20/+19
|/ | | | | | | | | | | | | | Merge struct s3c2410_nand and struct s3c2440_nand into one unified struct s3c24x0_nand. While at it, fix up and rename the functions to retrieve the NAND base address and fix up the s3c NAND driver to reflect this change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Vladimir Zapolskiy <vz@mleia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2014-11-263-3/+18
|\
| * arm: ls102xa: Remove bit reversing for SCFG registersAlison Wang2014-11-241-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCFG_SCFGREVCR is SCFG bit reverse register. This register must be written with 0xFFFFFFFF before writing to any other SCFG register. Then other SCFG register could be written in big-endian mode. Address: 157_0000h base + 200h offset = 157_0200h Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15|16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 W/R SCFGREV Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0-31 SCFGREV SCFG Bit Reverse Control Filed 32'h 0000_0000 - No bit reverse is applied 32'h FFFF_FFFF - Bit reverse is applied; so 31:0 will be stored/read as 0:31 This patch removes the bit reversing for SCFG registers in u-boot. It will be implemented through PBI commands in RCW .pbi write 0x570200, 0xffffffff .end So other SCFG register could be written in big-endian mode in u-boot or kernel directly. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Add snoop disable for slave port 0, 1 and 2Jason Jin2014-11-241-0/+1
| | | | | | | | | | | | | | | | | | Disable the snoop for slave interface 0, 1 and 2 to avoid the interleaving on the CCI400 BUS. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * drivers: usb: fsl: Define USB configs for LS102XANikhil Badola2014-11-241-0/+4
| | | | | | | | | | | | | | | | Define USB configs for LS1021XA such as CONFIG_SYS_FSL_USB1_ADDR, CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: Fixed a register definition errorTang Yuantian2014-11-191-1/+1
| | | | | | | | | | | | | | There are 8 SCFG_SPARECR registers in SCFG memory block, not one. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * qe: add u-qe support to arm boardZhao Qiang2014-11-192-0/+12
| | | | | | | | | | | | | | | | | | ls1021 is arm-core and support qe which is u-qe. add u-qe init for arm board. Signed-off-by: Zhao Qiang <B45475@freescale.com> [York Sun: Fix compiling error caused by u_qe_init()] Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-samsungTom Rini2014-11-265-3/+32
|\ \
| * | arm: odroid: usb: add support for usb host including ethernetSuriyan Ramasami2014-11-171-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds support for enabling the USB host features of the board. This includes the USB3503A hub and the SMC LAN9730 ethernet controller as well. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | arm: odroid: enable/disable usb host phy for exynos4412Suriyan Ramasami2014-11-171-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Enable/disable the usb host phy on the odroid U/X2 boards which are based on the Exynos4412 SOC. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | DMC: Exynos5: Enable update mode for DREX controllerAlim Akhtar2014-11-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per Exynos5800 UM ver 0.00 section 17.13.2.1 CONCONTROL register bit 3 [update_mode], Exynos5800 does not support the PHY initiated update. And it is recommanded to set this field to 1'b1 during initialization. This patch sets this bit. Applying MC-initiated mode makes DDL tracking ON, that helps in compensate MIF voltage variation. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos5800: Introduce new proid for Exynos5800Akshay Saraswat2014-11-172-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch intends to add a new proid for Exynos5800 which is a variant of Exynos5420. Product id for Exynos5800 is 0x5422. Both Exynos5420 and Exynos5800 are pin to pin compitable. This gives us an advantage of reusing Exynos5420 clock, pinmux, memory and other settings. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | sun6i: Add gmac support for sun6i boardsHans de Goede2014-11-253-0/+13
| | | | | | | | | | | | | | | | | | | | | Hookup the gmac found on the sun6i / A31 SoCs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: video: Add simplefb supportLuc Verhaegen2014-11-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add simplefb support, note this depends on the kernel having support for the clocks property which has recently been added to the simplefb devicetree binding. Signed-off-by: Luc Verhaegen <libv@skynet.be> [hdegoede@redhat.com: Use pre-populated simplefb node under /chosen as disussed on the devicetree list] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>.
* | | sunxi: video: Add cfb console driver for sunxiLuc Verhaegen2014-11-251-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a fixed mode hdmi driver for the sunxi platform. The fixed mode is a relatively safe 1024x768, more complete EDID handling is currently not provided. Only HDMI is supported today. This code is enabled when HPD detects an attached monitor. Current config is such that 8MB is shaved off at the top of the RAM. This avoids several memory handling issues, most significant is the fact that on linux on ARM you are not allowed to remap known RAM as IO. A clued in display driver will be able to recycle this reserved RAM in future though. cfbconsole was chosen as it provides the most important functionality: a working u-boot console, allowing for the debugging of certain issues without the need for a UART. Signed-off-by: Luc Verhaegen <libv@skynet.be> [hdegoede@redhat.com: Major cleanups and some small bugfixes] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sunxi: Add video pll clock functionsHans de Goede2014-11-253-1/+105
| | | | | | | | | | | | | | | | | | | | | This is a preparation patch for adding support for HDMI out. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | sun4i: Rename dram_clk_cfg to dram_clk_gateHans de Goede2014-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The data sheet just calls it DRAM_CLK_REG, and on sun6i we've both a dram_clk_cfg and dram_clk_gate, and the sun4i reg matches dram_clk_gate on sun6i, so name it the same on sun4i. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-245-10/+47
|\ \ \
| * | | arm: mx6: introduce disable_sata_clockNikita Kiryanov2014-11-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement disable_sata_clock for mx6 SoCs. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de>
| * | | mx6: clock: Add thermal clock enable functionNitin Garg2014-11-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add api to check and enable pll3 as required for thermal sensor driver. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
| * | | mx6: add weim registersFabio Estevam2014-11-201-0/+37
| | | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | | imx: consolidate set_chipselect_size functionFabio Estevam2014-11-203-10/+8
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Move MX5 specific set_chipselect_size function into generic i.MX part, such that MX6 based boards are able to use this function as well. While doing this the iomuxc gpr member needed to be consolidated between MX5 and MX6. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | | Merge git://git.denx.de/u-boot-dmTom Rini2014-11-243-1/+24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/serial/serial-uclass.c Signed-off-by: Tom Rini <trini@ti.com>
| * | | dm: at91: Add driver model support for the serial driverSimon Glass2014-11-211-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: at91: Add platform data for GPIO on at91sam9260-based boardsSimon Glass2014-11-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards all have the same GPIO arrangement, so add some common platform data that can be used by all boards. Remove the configs which are no longer required. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: at91: Add driver model support for atmel GPIO driverSimon Glass2014-11-211-0/+6
| |/ / | | | | | | | | | | | | | | | | | | Modify this driver to support driver model, with platform data required to determine the GPIOs that it controls. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | ARM: remove CONFIG_ARM926EJS definesMasahiro Yamada2014-11-2010-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM926EJS was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM926EJS and replaces the only reference in arch/arm/lib/cache.c with CONFIG_CPU_ARM926EJS. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | ARM: remove CONFIG_ARM920T definesMasahiro Yamada2014-11-201-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_CPU_ARM920T was introduced into Kconfig by commit 2e07c249a67e (kconfig: arm: introduce symbol for ARM CPUs). This commit removes all the defines of CONFIG_ARM920T and replaces the only reference in drivers/usb/host/ohci-hcd.c with CONFIG_CPU_ARM920T. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | | ARM: remove CONFIG_ARMV7 definesMasahiro Yamada2014-11-201-1/+0
|/ / | | | | | | | | | | | | | | Some (not all) of ARMv7 boards define CONFIG_ARMV7, which is useless. Besides, it is never referenced. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: atmel: add sama5d4ek board supportBo Shen2014-11-174-8/+256
| | | | | | | | | | | | | | | | | | | | | | The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display - Support ethernet - Support USB mass storage Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm, spl, at91: add at91sam9260 and at91sam9g45 spl supportHeiko Schocher2014-11-175-1/+34
| | | | | | | | | | | | | | | | | | | | | | add support for using spl code on at91sam9260 and at91sam9g45 based boards. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bo Shen <voice.shen@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [adopt Bo's change in spl.c] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm, at91: add missing ddr2 cr register MPDDRC_CR_EBISHARE defineHeiko Schocher2014-11-171-0/+1
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2014-11-178-1/+532
|\ \ | |/ |/|
| * arm: rmobile: Move rcar-i2c of the address defined to common headerNobuhiro Iwamatsu2014-11-101-0/+6
| | | | | | | | | | | | | | | | | | R-Car SoCs of rmobile have same IP of rcar-i2c, and have same address. This moves rcar-i2c of the address defined to rcar-base.h as common header of R-Car SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: Move sh-i2c of the address defined to common headerNobuhiro Iwamatsu2014-11-105-0/+23
| | | | | | | | | | | | | | | | | | R-Car SoCs of rmobile have same IP of sh-i2c, and have same address. This moves sh-i2c of the address defined to rcar-base.h as common header of R-Car SoCs, and headers of each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * arm: rmobile: Add support R8A7793Nobuhiro Iwamatsu2014-11-105-1/+503
| | | | | | | | | | | | | | | | Renesas R8A7793 is CPU with Cortex-A15. This supports the basic register definition and GPIO and framework of PFC. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2014-11-1311-170/+814
|\ \
| * | sun6i: ehci: Add sun6i ehci supportHans de Goede2014-11-133-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the 2 ehci controllers found on the sun6i (A31) soc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Marek Vasut <marex@denx.de>
| * | sun6i: Add dram initialization codeHans de Goede2014-11-133-3/+368
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add full support for dram initialization, using a fixed clock and autodetection of the memory organization (numbers of channels, bus-width, etc.). This is based on dram_sun6i.c and dram.h from u-boot in the Allwinner A31 SDK, extended with extra initialization sequences and the autodetect algorithm from boot0. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sun4i: Rename dram files to dram_sun4i.xHans de Goede2014-11-132-165/+184
| | | | | | | | | | | | | | | | | | | | | In preparation for adding sun6i dram support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sun6i: Add cpucfg register definitionsHans de Goede2014-11-132-1/+69
| | | | | | | | | | | | | | | | | | | | | Not used atm, for future use (e.g. PSCI). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sun6i: Add clock functions needed for SPL / DRAM initHans de Goede2014-11-133-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add clock_init_safe and clockset_pll5 functions, as these are needed for SPL support resp. DRAM init (which is needed for SPL too). Also add some extra clock register constant defines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sun6i: Add new p2wi controller driverOliver Schinagl2014-11-132-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A31 uses a new push-pull two wire interface, which features higher transfer speeds (upto 6 MHz) in theory. While the hardware can burst 8 bytes each time, this driver will only see very little use and thus is limited to single byte transmission only. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-11-131-1/+1
|\ \ \
| * | | ARM: cache-cp15: Use more accurate typesThierry Reding2014-11-121-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | size_t is the canonical type to represent variables that contain a size. Use it instead of signed integer. Physical addresses can be larger than 32-bit, so use a more appropriate type for them as well. phys_addr_t is a type that is 32-bit on systems that use 32-bit addresses and 64-bit if the system is 64-bit or uses a form of physical address extension to use a larger address space on 32-bit systems. Using these types the same API can be implemented on a wider range of systems. Signed-off-by: Thierry Reding <treding@nvidia.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2014-11-112-0/+13
|\ \ \ | |/ / |/| |
| * | arm: socfpga: Add socfpga_spim_enable() to reset_manager.cStefan Roese2014-11-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function will be needed by the upcoming Designware master SPI driver. As the SPI master controller is held in reset by the current Preloader implementation. So we need to release the reset for the driver to communicate with the controller. This function is called from arch_early_init_r() if the SPI driver is enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de>
OpenPOWER on IntegriCloud