summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/armv7/sunxi
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: Request macpwr gpio before using itHans de Goede2015-06-101-0/+1
| | | | | | | | This fixes ethernet no longer working on boards which use a gpio to enable the phy. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb_phy: Swap check for disconnect thresholdHans de Goede2015-06-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Before this commit the code for determining the disconnect threshold was checking for sun4i or sun6i assuming that those where the exception and that newer SoCs use a disconnect threshold of 2 like sun7i does. But it turns out that newer SoCs actually use a disconnect threshold of 3 and sun5i and sun7i are the exceptions, so check for those instead. Here are the settings from the various Allwinner SDK sources: sun4i-a10: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun5i-a13: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun6i-a31: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun7i-a20: USBC_Phy_Write(usbc_no, 0x2a, 2, 2); sun8i-a23: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun8i-h3: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); sun9i-a80: USBC_Phy_Write(usbc_no, 0x2a, 3, 2); Note this commit makes no functional changes for sun4i - sun7i, and changes the disconnect threshold for sun8i to match what Allwinner uses. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* ARM: sunxi: Share sun6i PSCI backend with sun8iChen-Yu Tsai2015-05-292-0/+5
| | | | | | | | | sun8i can share the PSCI backend with sun6i. Only difference is sun8i does not have CPU power clamp controls. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: sunxi: Add sun6i specific PSCI implementationChen-Yu Tsai2015-05-292-0/+277
| | | | | | | | | This adds PSCI support for sun6i. So far it only supports the PWR_ON method. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: sunxi: Make PSCI code sun7i specificChen-Yu Tsai2015-05-292-1/+1
| | | | | | | | | | | The PSCI code only works for sun7i. Rename it with _sun7i suffix, and build only if building for sun7i. This paves the way for adding PSCI support for other platforms. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: sunxi: Document registers in PSCI codeChen-Yu Tsai2015-05-291-7/+7
| | | | | | | | | | | | The PSCI CPU_ON code accesses quite a few registers. Document their names to make it easier to cross reference. Also explain "lock cpu" and "unlock cpu" as enabling/disabling debug access. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memoryDaniel Kochmański2015-05-291-2/+12
| | | | | | | | | | | This commit adds support to the sunxi SPL to load u-boot from the internal NAND. Note this only adds support to access the boot partitions to load u-boot, full NAND support to load the kernel, etc. from the nand data partition will come later. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun9i: Basic sun9i (A80) supportHans de Goede2015-05-293-0/+9
| | | | | | | Add initial sun9i (A80) support, only uart + mmc are supported for now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Remove support for building "old-fashioned" fel binariesHans de Goede2015-05-291-8/+0
| | | | | | | | | | The latest versions of the fel tool support loading normal u-boot builds directly, and this is now the preferred way to use the fel boot method. This commit removes support for the old deprecated standalone fel builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Use axp221 sid on a33Hans de Goede2015-05-291-5/+3
| | | | | | | | | Unlike the A31 and the A23 the A33 actually has a SID inside the SoC again, but sid[3] is 0 (at least on some SoCs), so it is better to use the axp221 sid. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Make DRAM_ODT_EN Kconfig setting a boolHans de Goede2015-05-193-14/+13
| | | | | | | | | | | | | | | | | Make DRAM_ODT_EN Kconfig setting a bool, add a separate DRAM_ODT_CORRECTION setting for A23 SoCs and use DRAM_ODT_EN Kconfig everywhere instead of only in dram_sun4i.c and hardcoding odt_en elsewhere. Note this commit makes no functional changes for existing boards, its purpose is to allow changing the odt_en value on future A33 boards. For sun4i/sun5i/sun7i boards which set DRAM_ODT_EN=y (which no defconfigs currently do) this patch turns on odt for both the DQ and the DQS lines, whereas previously it was possibly (but not desirable) to turn odt on only for one of them by setting the in DRAM_ODT_EN option to 1 or 2 instead of 3. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
* sunxi: Fix dram initialization not working on some a33 devicesHans de Goede2015-05-191-1/+1
| | | | | | | | | | | When porting the allwinner dram init code to u-boot we missed some code setting an extra bit when doing auto dram config. This commits add this bit, fixing dram init not working on the ga10h 10" a33 tablet which I'm bringing up atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: add support for UART2 on A23/A33Laurent Itti2015-05-191-0/+4
| | | | | | | | | | Add support for UART2 (2-pin version but note that RTS/CTS pins are available pn that port for possible future use), can be selected in config by using CONFIG_CONS_INDEX=3 Signed-off-by: Laurent Itti <laurentitti@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* ARM: Put target PC for PSCI CPU_ON on per-CPU stackJan Kiszka2015-05-131-3/+6
| | | | | | | | | | | | | | Use a per-CPU variable for saving the target PC during CPU_ON operations. This allows us to run this service independently on targets that have more than 2 cores and also core-local power control. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Factor out reusable psci_get_cpu_stack_topJan Kiszka2015-05-131-10/+5
| | | | | | | | | | | | | This algorithm will be useful on Tegra as well, plus we will need it for making _psci_target_pc per-CPU. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Factor out reusable psci_cpu_entryJan Kiszka2015-05-131-18/+2
| | | | | | | | | | | | | | | | _sunxi_cpu_entry can be converted completely into a reusable psci_cpu_entry. Tegra124 will use it as well. As with psci_disable_smp, also the enabling is designed to be overloaded in cased SMP is not controlled via ACTLR. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Factor out reusable psci_cpu_off_commonJan Kiszka2015-05-131-62/+1
| | | | | | | | | | | | | | | | | | Move parts of sunxi's psci_cpu_off into psci_cpu_off_common, namely cache disabling and flushing, clrex and the disabling of SMP for the dying CPU. These steps are apparently generic for ARMv7 and will be reused for Tegra124 support. As the way of disabled SMP is not architectural, though commonly done via ACLTR, the related function can be overloaded. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Factor out common psci_get_cpu_idJan Kiszka2015-05-131-5/+7
| | | | | | | | | | | | | | | | Will be required for obtaining the ID of the current CPU in shared PSCI functions. The default implementation requires a dense ID space and only supports a single cluster. Therefore, the functions can be overloaded in cases where these assumptions do not hold. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Tom Warren <twarren@nvidia.com>
* sunxi: usb: Protect phy-init and phy-power-on against multiple callsHans de Goede2015-05-041-0/+18
| | | | | | | | | Once we add support for the ohci controller the phy-init and phy-power-on functions may be called twice (once by the ehci code and once by the ohci code) protect them against this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb: Do not call phy_probe from hcd codeHans de Goede2015-05-041-49/+57
| | | | | | | | | | | | | | | | | | | The 2/3 usb-phys on the sunxi SoCs are really a single separate functional block, and are modelled as such in devicetree. So once we've moved all the sunxi usb code to the driver-model then phy_probe will be called once for the entire block from the driver-model enumeration code. Move to this now as this also avoids problems with phy_probe being called multiple times once we introduce ohci support. This also allows us to get rid of the sunxi_usb_phy_enabled_count variable as phy_probe now is guaranteed to be called only once. Since we're effectively rewriting the probe / remove functions, move them to the end of the file while we are at it, as that is the most logical place for them. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb: Rename the usbc.? files to usb_phy.?Hans de Goede2015-05-042-2/+2
| | | | | | | | The usbc.? files now only contain usb-phy related code, rename them to make this clear. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb: Rename sunxi_usbc_foo functions to sunxi_usb_phy_barHans de Goede2015-05-041-63/+61
| | | | | | | | | | | Rename the sunxi_usbc_foo functions to sunxi_usb_phy_bar to make it clear that these are usb-phy functions. Also change the verbs & nouns in the suffix to match the verbs & nouns used in the Linux kernels generic phy framework. This patch purely renames things, it contains no functional changes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb: Remove sunxi_usbc_get_io_base functionHans de Goede2015-05-041-20/+10
| | | | | | | | | | | This is the only function left in sunxi/usbc.c which is not phy related, so remove it. This is a preparation patch for turning the usbc.c code into a proper usb phy driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usb: Move setup of host controller clocks to the host controller driversHans de Goede2015-05-041-13/+1
| | | | | | | | | | | | The sunxi "usbc" code is mostly about phy setup, but currently also sets up the host controller clocks, which is something which really belongs in the host controller drivers, so move it there. This is a preparation patch for moving the sunxi ehci code to the driver model and for adding ohci support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: emac: Remove non driver-model codeHans de Goede2015-05-041-12/+0
| | | | | | | | | All sunxi boards now use the driver-model, so remove the non driver-model code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: emac: Add driver model supportHans de Goede2015-05-041-1/+3
| | | | | | | | Modify the sunxi-emac eth driver to support driver model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Stefan Roese <sr@denx.de>
* sunxi: axp: Add support for i2c based PMICs to the pmic-bus helpersHans de Goede2015-05-042-8/+29
| | | | | | | | | | Add support for the axp152 and axp209 PMICs to the pmic register access helpers. This is a preparation patch for moving the axp gpio code to a separate gpio driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: axp: Move axp pmic register helpers to a separate fileHans de Goede2015-05-042-0/+95
| | | | | | | | | | | Move the register helpers used to access the registers via p2wi resp. rsb bus on the otherwise identical axp221 and axp223 pmics to a separate file, so that they can be used by the upcoming standalone axp gpio driver too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usbc: Fix vbus gpio handling to work with the driver-modelHans de Goede2015-05-041-10/+11
| | | | | | | | | The driver-model gpio functions may return another value then -1 as error, make the sunxi usbc properly handle this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add basic A33 basic supportVishnu Patekar2015-05-043-0/+12
| | | | | | | | Enable full support for the A33 SoC including display, otg-usb, etc. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add a33 dram init codeVishnu Patekar2015-05-041-0/+363
| | | | | | | | | | | | Based on Allwinner dram init code from the a33 bsp: https://github.com/allwinner-zh/bootloader/blob/master/basic_loader/bsp/bsp_for_a33/init_dram/mctl_hal.c Initial u-boot port by Vishnu Patekar, major cleanup / rewrite by Hans de Goede. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add support for A33 PLL11 (second DRAM pll)Hans de Goede2015-05-041-0/+18
| | | | | | | Add support for the new second DRAM PLL found on the A33 SoC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: s/sun8i/sun8i_a23/Hans de Goede2015-05-044-4/+4
| | | | | | | | This is a preparation patch for adding A33 support, which will have a mach name of sun8i-a33. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Introduce a hidden SUNXI_GEN_SUNxI Kconfig boolHans de Goede2015-05-042-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | sun6i and newer (derived) SoCs such as the sun8i-a23, sun8i-a33 and sun9i have a various things in common, like having separate ahb reset control registers, the SID living inside the pmic, custom pmic busses, new style watchdog, etc. This commit introduces a new hidden SUNXI_GEN_SUN6I Kconfig bool which can be used to check for these features avoiding the need for an ever growing list of "#if defined CONFIG_MACH_SUN?I" conditionals as we add support for more "new style" sunxi SoCs. Note that this commit changes the behavior of the gmac and hdmi code for sun8i and the upcoming sun9i devices. This does not matter as sun8i does not have gmac nor hdmi, and sun9i has new hardware-blocks for these so the old code will not work there. Also this is intentional as if a sun8i / sun9i variant which does use the old hwblocks shows up then the GEN_SUN6I code paths will be the right ones to use. For completeness this also adds a SUNXI_GEN_SUN4I bool for A10/A13/A20. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usbc: Remove unused irq fieldHans de Goede2015-05-041-16/+0
| | | | | | | | We do not use irqs in u-boot so remove the unused irq field, and all the #ifdef-ery around the irq initialization. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Also set Auxiliary Ctl SMP bit in SPLHans de Goede2015-05-041-2/+3
| | | | | | | There is no reason not to and this make the #ifdef-ery easier to read. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun7i: Remove duplicate call to psci_arch_initJan Kiszka2015-05-021-1/+0
| | | | | | | | | | | | | | | This is already invoked a few cycles later in monitor mode by _secure_monitor (_sunxi_cpu_entry calls _do_nonsec_entry which triggers _secure_monitor via smc #0). Drop it here, it serves no purpose. CC: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: usbc: Wait for vbus to fall after disabling itHans de Goede2015-04-151-2/+13
| | | | | | | | | | | | | | | When u-boot boots the board may be powering vbus, we turn off vbus in sunxi_usbc_request_resources, if we are too quick with reading vusb-detect after this we may see a residual charge and assume we've an external vusb connected even though we do not. So when we see an external vusb wait a bit and try again. Without this when dealing with a pmic controller vbus and doing "reset" on the u-boot console the musb host will only init once every other boot, because the other boot it thinks an external vbus is present, this commit fixes this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: usbc: Initialize vusb value on request_resourcesHans de Goede2015-04-151-8/+8
| | | | | | | | | | | | | On boards which use the pmic to enable/disable vbus on the otg port, the vbus value is not reset to 0 on reset, as reset only resets the SoC and not the pmic, so explicitly set vbus to 0 on init (request_resources) by moving the gpio_direction_output call into request_resources. For consistency also move the gpio_direction_input call for vbus-detect into request_resources. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: GPIO pin mux hardware-feature-specific function index definesPaul Kocialkowski2015-04-152-16/+21
| | | | | | | | | | | Each hardware feature exposed through the GPIO pin mux is usually using the same function index (for a given port), so there is no need to define one value per pin: one value per hardware feature per port is sufficient, avoids duplication and makes everything easier to understand. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: common VBUS detection logic in usbcPaul Kocialkowski2015-04-151-4/+39
| | | | | | | | | | | | | VBUS detection could be needed not only by the musb code (to prevent host mode), but also by e.g. gadget drivers to start only when a cable is connected. In addition, this allows more flexibility in vbus detection, as it could easily be extended to other USBC indexes. Eventually, this would help making musb support independent from a hardcoded USB controller index (0). Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: usb: Drop AXP-sepcific VBUS detection and drive logicPaul Kocialkowski2015-04-151-17/+0
| | | | | | | | | VBUS detection and enable is now be used with virtual AXP GPIOs, so all the USB code has to use GPIO in every case and let sunxi_gpio do the heavy lifting. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: use CONFIG_SYS_CLK_FREQ to set cpu clockIain Paton2015-03-291-1/+1
| | | | | | | | | | | | | | | make the CPU clock selectable via Kconfig this removes the sunxi specific CONFIG_CLK_FULL_SPEED defined in each soc header and replaces it's use in board/sunxi/board.c with CONFIG_SYS_CLK_FREQ from Kconfig which allows us to configure board specific frequency on boot Signed-off-by: Iain Paton <ipaton0@gmail.com> [hdegoede@redhat.com s/CONFIG_SYS_CLK_FREQ/CONFIG_TIMER_CLK_FREQ/ for the arch-timer clk speed on sun7i to fix mis-compile on sun7i] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: sun4i: improve cpu clock selection methodIain Paton2015-03-291-16/+19
| | | | | | | | | | | | | | clock_set_pll1 would pick the next highest available cpu clock speed if a value not in the pre defined table was selected. this potentially results in overclocking the soc. reverse the selection method so that we select the next lowest speed and add the missing 912Mhz setting that's requested by sun7i which also uses the sun4i clock code. Signed-off-by: Iain Paton <ipaton0@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: musb: Fix some lo speed devices not working with musb hostHans de Goede2015-03-291-0/+7
| | | | | | | | | | | | | | | | The usb0 / otg phy on sunxi boards has a bug where it wrongly detects a high speed squelch on usb reset deassert when a lo speed device is plugged in. The android kernel has a work around for this in the form of temporary disabling the phy's squelch detection on reset deassert, this commit adds the same workaround to the u-boot sunxi musb code, thereby fixing various usb lo speed devices not working. Tested with a (before non working) usb keyboard and a usb 2.4 GHz wireless keyboard/mouse combo receiver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Support the FEL boot mode in the regular u-boot buildSiarhei Siamashka2015-02-162-6/+46
| | | | | | | | | | | | | | | | | | | | So that the CONFIG_SPL_FEL option is not needed anymore. And the regular SPL binary, generated by the default u-boot build, is now also bootable over USB in the FEL mode. The SPL still can boot from the SD card too. A bunch of system registers need to be saved/restored in order to ensure that the IRQ handler still works in the BROM FEL code after getting control back from the SPL. This is done in the sunxi code instead of abusing ifdefs in 'start.S'. The decision whether to load the main u-boot binary from the SD card or return to the FEL code in the BROM is done at runtime. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [hdegoede@redhat.com: Since we now restore various regs before returning to the FEL BROM code we can drop the sunxi specific #ifdefs in start.S] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Normalise FEL supportSimon Glass2015-02-165-87/+47
| | | | | | | | | | | | Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of creating its own. There are some #ifdefs required in start.S. Future work will hopefully remove these. This series is available at u-boot-dm, branch sunxi-working. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: dram: Un-inline dram helper functionsHans de Goede2015-02-162-0/+38
| | | | | | | | | Move the dram helper functions to a separate C file, rather then having them as inline helpers in dram.h. This saves 144 bytes in the .text segment for sun6i builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()Hans de Goede2015-02-021-3/+8
| | | | | | | | It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call into rsb_init(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: rsb: Add sun9i (A80 support)Hans de Goede2015-02-022-0/+13
| | | | | | | Add support for the A80 to the rsb code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
OpenPOWER on IntegriCloud