summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/arm926ejs/davinci
Commit message (Collapse)AuthorAgeFilesLines
* davinci: fixed cpu resetDavide Bonfanti2012-12-101-1/+1
| | | | | | | | The reset procedure works on watchdog timer while before it was modifying TIMER_1 registers. Tested on DM365. Signed-off-by: Davide Bonfanti <davide.bonfanti@bticino.it>
* ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORKTom Rini2012-09-273-41/+49
| | | | | | | | - Convert the non-relocation part of board_init_f to spl_board_init, turn on CONFIG_SPL_BOARD_INIT in the configs. - Remove duplicated code. - Add spl_boot_device() that returns the statically chosen boot device. Signed-off-by: Tom Rini <trini@ti.com>
* davinci, c6x: Always use C version of reset codeTom Rini2012-09-013-84/+34
| | | | | | | | | We can safely use the same reset code written in C for both Davinci and C6X platforms. In addition the C version of the code is marginally smaller on Davinci. Tested-by: Matt Porter <mporter@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* da8xx/hawkboard: Add support for ohci host controllerSughosh Ganu2012-09-011-0/+5
| | | | | | | | | | Also enable the ohci port on hawkboard. These additions result in an increased u-boot size -- adjust the same accordingly in the board's config. Move the usb header for da8xx platforms under arch-davinci. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* DaVinci DA8xx: fix set_cpu_clk_info()Laurence Withers2012-09-011-9/+14
| | | | | | | | | | | | | | | | | | | | | | For the DA8xx family of SoCs, the set_cpu_clk_info() function was not initialising the DSP frequency, leading to 'bdinfo' command output such as: [...snip...] ARM frequency = 300 MHz DSP frequency = -536870913 MHz DDR frequency = 300 MHz This commit provides a separate implementation of set_cpu_clk_info() for the DA8xx SoCs that initialises the DSP frequency to zero (since currently the DSP is not enabled by U-Boot on any DA8xx platform). The separate implementation is justified because there is no common code between DA8xx and the other SoC families. It is now much easier to understand the flow of the two separate functions. Signed-off-by: Laurence Withers <lwithers@guralp.com> Cc: Tom Rini <trini@ti.com> Cc: Hadli, Manjunath <manjunath.hadli@ti.com> Cc: Heiko Schocher <hs@denx.de>
* DaVinci DA8xx: replace magic number for DDR speedLaurence Withers2012-09-011-1/+2
| | | | | | | | | | Replace a magic number for the DDR2/mDDR PHY clock ID with a proper definition. In addition, don't request this clock ID on DA830 hardware, which does not have a DDR2/mDDR PHY (or associated PLL controller). Signed-off-by: Laurence Withers <lwithers@guralp.com> Cc: Tom Rini <trini@ti.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
* arm/davinci/da850: add uart0 pinmuxMikhail Kshevetskiy2012-09-011-0/+5
| | | | | Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Tested-by: Sughosh Ganu <urwithsughosh@gmail.com>
* arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138Mikhail Kshevetskiy2012-09-011-7/+19
| | | | | | | | | follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) of OMAP-L138 DSP+ARM Processor Technical Reference Manual Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com> Acked-by: Christian Riesch <christian.riesch@omicron.at> Tested-by: Christian Riesch <christian.riesch@omicron.at>
* da850/omap-l138: Add support to read u-boot image from MMC/SDLad, Prabhakar2012-09-011-0/+5
| | | | | | | | | | | | | | | DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will be in SPI flash and U-Boot image will be in MMC/SD card. SPL will do the low level initialization and then loads the u-boot image from MMC/SD card. Define CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138 configuration file to enable this feature. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* arm, davinci: perform check for initializing global data and serial initLad, Prabhakar2012-09-011-6/+9
| | | | | | | | | | | initialize baudrate, flags, data and serial initialization, only when CONFIG_SPL_LIBCOMMON_SUPPORT is defined. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com> Acked-by: Christian Riesch <christian.riesch@omicron.at>
* da850/omap-l138: Add MMC support for DA850/OMAP-L138Lad, Prabhakar2012-09-011-0/+11
| | | | | | | | | This patch adds support for MMC/SD on DA850/OMAP-L138. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* DaVinci: fix ddr2 vtp i/o calibrationTroy Kisky2012-07-071-4/+3
| | | | | | | | | | | | | | | | | | | | | Previously, only the low 5 bits (NCH) were being transfered from DDRVTPR to DDRVTPIOCR, the bits 5-9 where zeroed. VTP_RECAL should be bit 15, not 18. The only mainline board affected by this change is davinci_sonata. The other Davinci boards define CONFIG_SKIP_LOWLEVEL_INIT. However, if the program that loads u-boot on these boards copied the code from u-boot, they will need fixed as well. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Please get tested by acks before applying, where tested by means an overnight memory test. Thanks Troy
* dm6467Tevm: Use a common configuration file for davinci_dm6467evm and ↵prabhakar.csengg@gmail.com2012-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | davinci_dm6467Tevm In commit 2d575e46859dd9127a9cec731ace77523e6ea2ab a separate header file was introduced for the DM6467T EVM, include/configs/davinci_dm6467Tevm.h. The substantial difference between the davinci_dm6467evm and the davinci_dm6467Tevm configuration is a single bit in the hardware revision that is passed to the Linux kernel and davinci_dm6467evm has REFCLK_FREQ = 27000000 where as davinci_dm6467Tevm.h has a REFCLK_FREQ = 33000000. This patch removes include/configs/davinci_dm6467Tevm.h. Instead the include/configs/davinci_dm6467evm.h configuration is used for DM6467T EVMs and renamed CFG_REFCLK_FREQ to CONFIG_REFCLK_FREQ and CONFIG_REFCLK_FREQ is defined in boards.cfg. Signed-off-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Tom Rini <trini@ti.com>
* davinci: cleanup davinci_sync_env_enetaddr() fucntionHadli, Manjunath2012-02-271-3/+6
| | | | | | | | | | | | check for the return status for eth_getenv_enetaddr_by_index() and eth_setenv_enetaddr() functions and print appropriate message on failure. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Changes to move hawkboard to the new spl infrastructureSughosh Ganu2012-02-122-11/+17
| | | | | | | | | | | | | | | | | | This patch moves hawkboard to the new spl infrastructure from the older nand_spl one. Removed the hawkboard_nand_config build option -- The spl code now gets compiled with hawkboard_config, after building the main u-boot image, using the CONFIG_SPL_TEXT_BASE. Modified the README.hawkboard to reflect the same. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com> Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci: Add lowlevel_init for SoCs other than DM644XChristian Riesch2012-02-121-0/+4
| | | | | | | | | | | | | The low level initialization code in arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S was written for DM644X SoCs only. This patch makes the lowlevel_init function in this file a dummy function for SoCs other than DM644X. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Tom Rini <trini@ti.com> Cc: Sergey Kubushyn <ksi@koi8.net> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de>
* davinci: add support for printing clock frequencyHadli, Manjunath2012-02-121-0/+32
| | | | | | | | | add support for printing various clock frequency info found in SOC such as ARM core frequency, DSP core frequency and DDR frequency as part of bdinfo command. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Tom Rini <trini@ti.com>
* davinci: remove macro CONFIG_DISPLAY_CPUINFOHadli, Manjunath2012-02-121-44/+0
| | | | | | | | | | remove the macro CONFIG_DISPLAY_CPUINFO as it is no longer required. This is because clock info will be printed as part 'bdinfo' command and also remove support print_cpuinfo() as it will no longer be called. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Tom Rini <trini@ti.com>
* arm, davinci: add workaround for not resetting DMA bus and VPSS modulesHeiko Schocher2012-02-121-3/+49
| | | | | | | | | | The Buffer Logic of VPSS is Not Reset by System Reset Pin, see http://www.ti.com/lit/er/sprz316b/sprz316b.pdf chapter Advisory 1.2.1 on page 9. Add workaroundcode proposed in the errata. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com>
* arm, davinci: add PLL0 prediv to da850 lowlevel setupBen Gardiner2012-02-121-0/+7
| | | | | | | | | | | | | | | | The OMAP-L138 has a pre-divider available on PLL0. Add support to da850_lowlevel.c for configuring PLL0's pre-divider. This is to achieve certain OPP's -- e.g. the 372MHz OPP used also by Linux. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Cc: Christian Riesch <christian.riesch@omicron.at> CC: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci: Fix build warnings for cam_enc_4xxChristian Riesch2011-12-241-2/+3
| | | | | | | | | | | | This patch fixes a build warning for the cam_enc_4xx board introduced by commit d6ec0c0dfc70447cf615ae80a952da81f73f16b4: spl.c:35:13: warning: 'gdata' defined but not used spl.c:36:13: warning: 'bdata' defined but not used Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Tom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de>
* arm, davinci: Add SPL support for DA850 SoCsChristian Riesch2011-12-242-2/+35
| | | | | | | | | | This code adds an SPL for booting from SPI flash on DA850 SoCs. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
* davinci: Fixed wrong timebase clock frequency.Manfred Rudigier2011-12-191-1/+1
| | | | Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
* arm, davinci: Use lldiv for the 64-bit divisions in timer.cChristian Riesch2011-12-101-2/+4
| | | | | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Tom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* arm, davinci: move misc function in arch treeHeiko Schocher2011-12-062-1/+151
| | | | | | | | | | | | move the board/davinci/common/misc.c file to arch/arm/cpu/arm926ejs/davinci/misc.c, so all davinci boards can use this functions. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci, da850: add uart1 tx rx pinmux configHeiko Schocher2011-12-061-0/+5
| | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Tom Rini <trini@ti.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci: Remove duplication of pinmux configuration codeChristian Riesch2011-12-061-28/+8
| | | | | | | | | | This patch replaces the pinmux configuration code in arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c by the code from arch/arm/cpu/arm926ejs/davinci/pinmux.c. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
* arm, da850: Add pinmux configurations to the arch treeChristian Riesch2011-12-062-0/+167
| | | | | | | | | | | | | Up to now nearly every davinci board has separate code for the definition of pinmux configurations. This patch adds pinmux configurations for the DA850 SoCs to the arch tree which may later be used for all DA850 based boards. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Heiko Schocher <hs@denx.de>
* arm, davinci: Move pinmux functions from board to arch treeChristian Riesch2011-12-062-1/+106
| | | | | | | | | | | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Syed Mohammed Khasim <sm.khasim@gmail.com> Cc: Sughosh Ganu <urwithsughosh@gmail.com> Cc: Nick Thompson <nick.thompson@ge.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Nick Thompson <nick.thompson@ge.com>
* davinci_emac: move arch-independent defines to separate headerIlya Yanok2011-12-064-0/+4
| | | | | | | | | | | DaVinci EMAC is found not only on DaVinci SoCs but on some OMAP3 SoCs also. This patch moves common defines from arch-davinci/emac_defs.h to drivers/net/davinci_emac.h DaVinci specific PHY drivers hacked to include the new header. We might want to switch to phylib in future. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* arm, davinci: da850/dm365 lowlevel cleanupHeiko Schocher2011-11-152-124/+71
| | | | | | | | | | | | | | | | - Cleanup a lot of fix values, and use defines instead. - Also make some values configurable through the board config file. - delete the NAND_SPL code for da850, as it is not used actually - remove the asm code Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: Fix setting of the SDRAM configuration registerChristian Riesch2011-11-081-6/+19
| | | | | | | | | | | | | | | da850_ddr_setup() expects the BOOTUNLOCK bit to be set in If BOOTUNLOCK is not set in this define, several configuration bits will not be writeable and the code will not work. Since the BOOTUNLOCK and TIMUNLOCK bits are not configuration options but access control bits, this patch changes the code to work irrespective of the value of these bits in CONFIG_SYS_DA850_DDR2_SDBCR. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: Remove the duplication of LPSC functionsChristian Riesch2011-11-081-92/+4
| | | | | | | | | | | | | | The LPSC functions defined in arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c are replaced by those already defined in arch/arm/cpu/arm926ejs/davinci/psc.c. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: Rename AM1808 lowlevel functions to DA850Christian Riesch2011-11-082-69/+69
| | | | | | | | | | | | | | | Rename arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c and arch/arm/include/asm/arch-davinci/am1808_lowlevel.h to da850_lowlevel.c and da850_lowlevel.h since they apply not only to the AM1808 SoC but to all DA850 chips. The function names and #defines are changed likewise. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm926ejs, davinci: add cpuinfo for dm365Heiko Schocher2011-11-031-2/+25
| | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: add lowlevel function for dm365 socHeiko Schocher2011-11-031-0/+439
| | | | | | | | | | used for booting (for example) from NAND using spl code. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: add support for new spl frameworkHeiko Schocher2011-11-032-0/+68
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: Add function lpsc_syncreset()Christian Riesch2011-11-031-5/+15
| | | | | | | | | | | | | This patch adds a function lpsc_syncreset that allows setting a lpsc module into Sync Reset state. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* davinci: remove config.mk file from the sourcesVladimir Zapolskiy2011-10-271-32/+0
| | | | | | | | To compile TI Davinci SoC support the identical config.mk file from the cpu directory shall be used. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUMManjunath Hadli2011-10-271-4/+2
| | | | | | | | | remove macro CONFIG_EMAC_MDIO_PHY_NUM and depending macro EMAC_MDIO_PHY_NUM as they are no longer needed with the support for more than 1 PHYs in davinci emac driver. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* DaVinci: correct MDSTAT.STATE maskSergei Shtylyov2011-10-272-5/+7
| | | | | | | | | | | | MDSTAT.STATE occupies bits 0..5 according to all available documentation, so fix the mask which previously was leaving out the intermediate state indicator bit. While at it, introduce two #define's for that mask -- unfortunately, we can't use a single #define as the assembly code can't include <asm/arch/hardware.h> due to C-specfic constructs in it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci, da8xx: add cpuinfoHeiko Schocher2011-09-301-2/+14
| | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci, am1808: add lowlevel functions for booting from NORHeiko Schocher2011-09-302-0/+429
| | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: add internal WDT support for AM1808 cpusHeiko Schocher2011-09-301-0/+31
| | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* arm, davinci: move davinci_timer in header fileHeiko Schocher2011-09-301-14/+1
| | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* net, davinci_emac: add KSZ8864 switchHeiko Schocher2011-09-302-1/+69
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* da8xx: add support for multiple PLL controllersSudhakar Rajashekhara2011-09-041-11/+19
| | | | | | | | | Modify clk_get() function in cpu file to work for multiple PLL controllers. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Timer: Remove reset_timer() for non-Nios2 archesGraeme Russ2011-07-261-5/+0
|
* DaVinci: Remove incorrect CONFIG optionSandeep Paulraj2011-02-021-6/+0
| | | | | | | | | The option CONFIG_SOC_DM6447 seems to have ended up in the code by mistake. It is not used anywhere and there is no chip called DM6447. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* DaVinci DM6467: Fix Build ErrorSandeep Paulraj2011-02-021-0/+16
| | | | | | | This commit fixes build errors on the DM6467 port. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
OpenPOWER on IntegriCloud