summaryrefslogtreecommitdiffstats
path: root/arch/arm/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
...
* | sunxi: Switch to using malloc_simple for the splHans de Goede2015-10-201-0/+1
| | | | | | | | | | | | | | | | | | | | common/dlmalloc.c is quite big, both in .text and .data usage. E.g. for a Mele_M9 sun6i board build this reduces .text from 0x4214 to 0x3b94 bytes, and .data from 0x54c to 0x144 bytes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Tom Rini <trini@konsulko.com>
* | sunxi: Enable CONFIG_SPL_STACK_RHans de Goede2015-10-201-0/+1
|/ | | | | | | | | | | | Select CONFIG_SPL_STACK_R for sunxi boards, this gives us much more room on the stack once we've the DRAM running. Besides being a good change to have on itself, this also paves the way for switching to using malloc_simple in the SPL which cuts of close to 4KiB of the SPL size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* vexpress64: fvp dram: add DRAM configurationRyan Harkin2015-10-111-0/+9
| | | | | | | | | | | | | | | | | | | | Create an additional FVP configuration to boot images pre-loaded into DRAM. Sometimes it's preferential to boot the model by loading the files directly into DRAM via model parameters, rather than using SemiHosting. An example of model parmaters that are used to pre-load the files into DRAM: --data cluster0.cpu0=Image@0x80080000 \ --data cluster0.cpu0=fvp-base-gicv2-psci.dtb@0x83000000 \ --data cluster0.cpu0=uInitrd@0x84000000 Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [trini: Update board/armltd/vexpress64/Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
* vf610: add support for Phytec PCM052Albert ARIBAUD \(3ADEV\)2015-10-021-0/+5
| | | | | | | | | | | | | | | | | | Devices supported are: - NFC (NAND FLASH) - MMC - QSPI (SPI NOR FLASH) - I2C (only bus 2) - I2C RTC - I2C EEPROM - FEC Patch-series: 2 - remove useless CONFIG_SYS_SPD_BUS_NUM from config - remove include of config_cmd_default.h - remove duplicate CONFIG_CMD_NET Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
* ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default.Peter Griffin2015-09-281-1/+1
| | | | | | | | | | | | | | | | | | | Use DM for the pl01x serial driver on hikey. Also allow UART0 or UART3 to be chosen via Kconfig. By default we now output to UART3 as the latest version of ATF outputs to this UART. Also UART3 comes out on the LS connector, as opposed to UART0 which goes to a unpopulated header. As part of this change we also enable CONFIG_BOARD_EARLY_INIT_F and call the pinmux configuration code for the UART. Before we were relying on ATF having already configured the pin configuration. NB: Upstream Linux kernel doesn't yet support UART3, so serial console will still be output on UART0 when booting a upstream kernel. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: hikey: Select DM, DM_GPIO from KconfigPeter Griffin2015-09-281-0/+2
| | | | | | | | Most platforms enable these options from Kconfig rather than the configs header file. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* imx: mx7dsabresd: Add support for MX7D SABRESD boardAdrian Alonso2015-09-131-0/+6
| | | | | | | | | | | | * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* board: Add Toby-Churchill SL50 board support.Enric Balletbò i Serra2015-09-111-0/+8
| | | | | | | | | Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* arm: Remove tx25 boardSimon Glass2015-09-111-6/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove palmtreo680 boardSimon Glass2015-09-111-6/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove xaeniax boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove vpac270_nor_128 boardSimon Glass2015-09-111-6/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove vision2 boardSimon Glass2015-09-111-5/+0
| | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
* arm: Remove versatileab boardSimon Glass2015-09-111-7/+1
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove tt01 boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove scb9328 boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove qong boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove pxa255_idp, zipitz2 boardsSimon Glass2015-09-111-10/+0
| | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove polaris and trizepsiv boardsSimon Glass2015-09-111-5/+0
| | | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
* arm: Remove palmtc boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove palmld boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove nhk8815 boards and nomadik archSimon Glass2015-09-111-6/+0
| | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove mx51_efikamx, mx51_efikasb boardsSimon Glass2015-09-111-5/+0
| | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove lp8x4x boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove jornada boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove mx31_litekit boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove imx27lite, imx27_litekit and magnesium boardsSimon Glass2015-09-111-9/+0
| | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove ima3-mx53 boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove snowball and u8500_href boardsSimon Glass2015-09-111-10/+0
| | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Remove balloon3 boardSimon Glass2015-09-111-5/+0
| | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: socfpga: Always enable OF_CONTROL and SPL_OF_CONTROLMarek Vasut2015-09-041-0/+2
| | | | | | | The SoCFPGA probes mostly from OF and the OF is mandatory both in U-Boot itself and U-Boot SPL. Enable it by default. Signed-off-by: Marek Vasut <marex@denx.de>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-031-0/+10
|\
| * rockchip: Add core SoC start-up codeSimon Glass2015-09-021-0/+10
| | | | | | | | | | | | | | Add code for starting up U-Boot SPL and U-Boot proper. This is generic and makes use of devices provided by the board- or SoC-specific code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arch/arm/Kconfig: Add back in missing entries.Tom Rini2015-09-021-0/+2
| | | | | | | | | | | | | | In 2178282 we accidentally dropped out hilsilicon and cm_t43. Bring these back in. Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Add SYS_L2CACHE_OFF Kconfig entryPeng Fan2015-09-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To i.MX6UL, SYS_L2CACHE_OFF is selected, but there is no Kconfig entry for SYS_L2CACHE_OFF. Then "select SYS_L2CACHE_OFF" does not effect for i.MX6UL, which is not expected. Since SYS_L2CACHE_OFF is mainly used by ARM architecture, add it to arch/arm/Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de>
* | imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig filePeng Fan2015-09-021-130/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move TARGET_xx Kconfig option based on mx6 to arch/arm/cpu/armv7/mx6/Kconfig. Add enable "CONFIG_ARCH_MX6" for boards based on mx6. Then we can choose target boards using "make ARCH=arm menuconfig" with ARCH_MX6 defined. If using original way, we have no chance to enable ARCH_MX6 when "make menuconfig". Even define CONFIG_ARCH_MX6=y in xx_defconfig, kconfig will complains "arch/../configs/platinum_titanium_defconfig:3: warning: override: TARGET_PLATINUM_TITANIUM changes choice state" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Bénard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Marek Vasut <marex@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Soeren Moch <smoch@web.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Soeren Moch <smoch@web.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
* | ARM: ts4800: add basic board supportLucile Quirion2015-09-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console, TS4800 watchdog The config use CONFIG_SKIP_LOWLEVEL_INIT as U-boot is used as a second stage bootloader. Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com> signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Stefano Babic <sbabic@denx.de>
* | udoo: Switch to SPL supportvpeter42015-09-021-0/+1
|/ | | | | | | | | | | | | | | | | | | Currently we need to build one U-boot image for each of the udoo variants: quad and dual-lite. By switching to SPL we can support all two variants with a single binary. Based on the SPL for wandboard. Tested with OpenELEC (Open Embedded Linux Entertainment Center) on both boards. Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Peter Vicman <peter.vicman@gmail.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* ARM: uniphier: enable SPL_OF_CONTROLMasahiro Yamada2015-08-311-0/+1
| | | | | | | | | | | | | Device Tree really improves code maintainability and is now available for SPL too. This is the state-of-the-art implementation in U-boot. The board files (platform data) are no longer needed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: uniphier: select SPL_DM rather than default in defconfigMasahiro Yamada2015-08-301-0/+1
| | | | | | Now UniPhier SoCs highly depend on Driver Model for SPL, too. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROLMasahiro Yamada2015-08-181-3/+0
| | | | | | | | | | | | | | | | | | | As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: exynos: move SoC sources to mach-exynosThomas Abraham2015-08-171-1/+1
| | | | | | | | | | | | | | Move arch/arm/cpu/armv7/exynos/* to arch/arm/mach-exynos/* to allow reuse of existing code for ARMv8 based Exynos platforms. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* ARM: drop "optional" from target select in favor of ARCH_VERSATILEMasahiro Yamada2015-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | Since commit a26cd04920dc ("arch: Make board selection choices optional"), Kconfig could create such an insane .config file that no SoC/board is selected. This is now a real problem for Buildroot, for example. (http://lists.busybox.net/pipermail/buildroot/2015-July/135125.html) This commit drops the "optional" from the ARM target select menu in favor of "Versatile family". Rationale: - Historically, Linux chose versatile_defconfig as the default of ARM defconfig. (arch/arm/Makefile of Linux describes: KBUILD_DEFCONFIG := versatile_defconfig) - It was published by ARM Ltd. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arm: am437x: Introduce new board cm-t43Nikita Kiryanov2015-08-121-0/+6
| | | | | | | | | | | Add initial support for CM-T43, an AM437x based SoM. This support includes: serial, MMC/eMMC, NAND, USB, ETH, I2C, GPIO, DRAM detection. Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* ARM64: hikey: hi6220: Add u-boot support for the 96boards CE HiKey board.Peter Griffin2015-08-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HiKey is the first 96boards consumer edition compliant board. It features a hi6220 SoC which has eight ARM A53 cpu's. This initial port adds support for: - 1) Serial 2) eMMC / SD card 3) USB 4) GPIO It has been tested with Arm Trusted Firmware running u-boot as the BL33 executable. Notes: eMMC has been tested with basic reading of eMMC partition into DDR. I have not tested writing / erasing. Due to lack of clock control it won't be running in the most performant high speed mode. SD card slot has been tested for reading and booting kernels into DDR. It is also currently configured to save the u-boot environment to the SD card. USB has been tested with ASIX networking adapter to tftpboot kernels into DDR. On v2015.07-rc2 dhcp now works, and also USB mass storage are correctly enumerated. GPIO has been tested using gpio toggle GPIO4_1-3 to flash the LEDs. Basic SoC datasheet can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf Board schematic can be found here: - https://github.com/96boards/documentation/blob/master/hikey/ 96Boards-Hikey-Rev-A1.pdf Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
* integrator: switch to DM serial portLinus Walleij2015-08-121-0/+2
| | | | | | | | This switches the Integrator boards over to using the device model for its serial ports. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* lpc32xx: devkit3250: add spl build supportVladimir Zapolskiy2015-08-121-0/+1
| | | | | | | | | | | | The change adds SPL build support to Timll DevKit3250 board, the generated SPL image can be uploaded over UART5, JTAG or stored on NAND. SPL is designed to load U-boot image from NAND. All new NAND chip defines in board configuration are needed by SPL NAND "simple" framework, the framework is used to reduce potentially duplicated code from LPC32xx SLC NAND driver. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* sunxi: Drop our own copy of the USB_KEYBOARD optionsHans de Goede2015-08-051-0/+1
| | | | | | | USB_KEYBOARD is now defined in drivers/usb/Kconfig, drop our own duplicate definition. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-08-021-8/+8
|\
| * imx: mx6ul_14x14_evk add basic board supportPeng Fan2015-08-021-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
OpenPOWER on IntegriCloud