summaryrefslogtreecommitdiffstats
path: root/README
Commit message (Collapse)AuthorAgeFilesLines
* fix wording in READMEBruce Adler2007-11-031-1/+1
| | | | | | | Changed the wording to properly describe the shadowing of the environment from ROM to RAM Signed-off-by: Bruce Adler <bruce.adler@acm.org>
* fdt: remove unused OF_FLAT_TREE_MAX_SIZE referencesKim Phillips2007-08-291-6/+4
| | | | | | and make some minor corrections to the FDT part of the README. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* ColdFire: Add M54455EVB for MCF5445xTsiChungLiew2007-08-161-0/+1
| | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-151-242/+188
|\
| * multicast tftp: RFC2090David Updegraff2007-08-131-0/+10
| | | | | | | | | | | | | | | | Implemented IETF RFC2090, Multicast TFTP. Initial implementation on Realtek RTL8139 and Freescale TSEC. Signed-off-by: David Updegraff <dave@cray.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
| * New CONFIG_BOOTP_SERVERIP optionWilson Callan2007-08-131-1/+4
| | | | | | | | | | | | | | | | Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different from the bootp server Signed-off-by: Wilson Callan <wcallan@savantav.com> Signed-off-by: Ben Warren <bwarren@qstreams.com>
| * README: Remove outdated cpu type, board type, and NAME_config listsKim Phillips2007-08-101-136/+4
| | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-071-125/+169
| |\
| | * Fixed typo in README (pointed out by Martin Jost).Wolfgang Denk2007-08-061-1/+1
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * Merge branch 'testing' into workingAndy Fleming2007-08-031-102/+105
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | | * Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!Jon Loeliger2007-07-091-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the choices for CONFIG_BOOTP_ are now documented in the README file. You must now individually select exactly the set that you want using a series of #define CONFIG_BOOTP_<x> statements in the board port config files now. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| | | * README: Rewrite command line config to use CONFIG_CMD_* names.Jon Loeliger2007-07-041-93/+86
| | | | | | | | | | | | | | | | Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | USB event poll supportZhang Wei2007-06-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USB event poll support, which could be used in usbkbd and other usb devices driver when the asynchronous interrupt processing is supported. Signed-off-by: Zhang Wei <wei.zhang@freescale.com
| * | | Merge git://www.denx.de/git/u-boot into 2007_05_15-testingMarkus Klotzbuecher2007-05-291-0/+1
| |\ \ \ | | | |/ | | |/|
| * | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-04-231-19/+36
| |\ \ \
| * | | | PXA: pxa27x USB OHCI supportRodolfo Giometti2007-03-261-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Rodolfo Giometti <giometti@linux.it>
| * | | | Merge with git://www.denx.de/git/u-boot.git#testing-USBMarkus Klotzbuecher2007-03-231-0/+62
| |\ \ \ \
| | * \ \ \ Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-11-271-9/+124
| | |\ \ \ \
| | * \ \ \ \ Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-08-071-1/+7
| | |\ \ \ \ \
| | * \ \ \ \ \ Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-06-261-2/+3
| | |\ \ \ \ \ \
| | * | | | | | | Code cleanupWolfgang Denk2006-06-141-11/+11
| | | | | | | | |
| | * | | | | | | Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-06-141-0/+1
| | |\ \ \ \ \ \ \
| | * | | | | | | | Various USB related patchesWolfgang Denk2006-06-141-1/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add support for mpc8xx USB device. - Add support for Common Device Class - Abstract Control Model USB console. - Add support for flow control in USB slave devices. - Add support for switching between gserial and cdc_acm using environment. - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h - Update usbcore slightly to ease host enumeration. - Fix non-portable endian problems in usbdcore and usbdcore_ep0. - Add AdderUSB_config as a defconfig to enable usage of the USB console by default with the Adder87x U-Boot port. Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
* | | | | | | | | | Merge branch 'master' into u-boot-5329-earlyJohn Rigby2007-07-101-22/+63
|\ \ \ \ \ \ \ \ \ \ | | |_|_|_|_|_|_|_|/ | |/| | | | | | | |
| * | | | | | | | | [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-221-22/+63
| | |_|_|_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | | | | | | Added M5329AFEE and M5329BFEE PlatformsTsiChung Liew2007-06-181-0/+5
|/ / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | | | | | | | Merge git://www.denx.de/git/u-bootMichal Simek2007-05-081-19/+36
|\ \ \ \ \ \ \ \ | | |_|_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/asm-microblaze/microblaze_intc.h include/linux/stat.h
| * | | | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xxWolfgang Denk2007-04-181-11/+11
| |\ \ \ \ \ \ \
| | * \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-02-281-0/+10
| | |\ \ \ \ \ \ \ | | | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile Fix the merge conflict in file drivers/Makefile Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | Fix the confilcts when merging 'master' into hpc2.roy zang2006-12-011-1/+60
| | |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
| | * \ \ \ \ \ \ \ Solve the copyright conflicts when merging 'master' into hpc2.roy zang2006-11-291-6/+6
| | |\ \ \ \ \ \ \ \ | | | | |_|_|_|_|_|/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge branch 'master' into hpc2 Conflicts: drivers/cfi_flash.c
| | * | | | | | | | General code modification for mpc7448hpc2 board support.roy zang2006-11-021-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| * | | | | | | | | Add a flattened device tree (fdt) command (2 of 2)Gerald Van Baren2007-03-311-8/+25
| | |_|_|/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | Modifications to the existing code to support the new fdt command.
* | | | | | | | | new: FSL and MSR support #2Michal Simek2007-05-051-0/+1
|/ / / / / / / /
* | | | | | | | [PATCH] I2C: Add support for multiple I2C busses for RTC & DTTStefan Roese2007-02-201-0/+10
| |_|/ / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch switches to the desired I2C bus when the date/dtt commands are called. This can be configured using the CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | Merge http://www.denx.de/git/u-bootKim Phillips2006-11-281-6/+6
|\ \ \ \ \ \ \ | | |/ / / / / | |/| | | | |
| * | | | | | Minor code cleanup. Update CHANGELOG.Wolfgang Denk2006-11-271-6/+6
| |/ / / / /
* | | | | | mpc83xx: Update 83xx to use fsl_i2c.cTimur Tabi2006-11-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. Added multiple I2C bus support to fsl_i2c.c. Signed-off-by: Timur Tabi <timur@freescale.com>
* | | | | | mpc83xx: Add support for the MPC8349E-mITXTimur Tabi2006-11-031-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi <timur@freescale.com>
* | | | | | Add support for multiple I2C busesBen Warren2006-11-031-1/+41
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben
* | | | | README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETEWolfgang Denk2006-10-281-1/+5
| | | | |
* | | | | Merge with /home/wd/git/u-boot/masterWolfgang Denk2006-10-241-2/+16
|\ \ \ \ \
| * | | | | Add ATSTK1000 and ATSTK1002 board supportWolfgang Denk2006-10-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU daughterboard. ATSTK1000 is a full-featured development board for AT32AP CPUs. It has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, and connectors for USART, PS/2, VGA, USB, MMC/SD cards and CompactFlash cards. For more information, please see this page: http://www.atmel.com/dyn/products/tools.asp?family_id=682 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the AT32AP7000 chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | Add AT32AP CPU and AT32AP7000 SoC supportWolfgang Denk2006-10-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Haavard Skinnemoen, 06 Sep 2006 This patch adds support for the AT32AP CPU family and the AT32AP7000 chip, which is the first chip implementing the AVR32 architecture. The AT32AP CPU core is a high-performance implementation featuring a 7-stage pipeline, separate instruction- and data caches, and a MMU. For more information, please see the "AVR32 AP Technical Reference": http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf In addition to this, the AT32AP7000 chip comes with a large set of integrated peripherals, many of which are shared with the AT91 series of ARM-based microcontrollers from Atmel. Full data sheet is available here: http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | Add AVR32 architecture supportWolfgang Denk2006-10-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 This patch adds common infrastructure code for the Atmel AVR32 architecture. See doc/README.AVR32 for details. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | | | | Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger2006-09-191-6/+49
|\ \ \ \ \ \ | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/stxxtc/Makefile
| * | | | | Add documentation on the latest build environment extentions toMarian Balakowicz2006-09-071-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | the README file.
| * | | | | Added changelog entry for previous small commits and extended README onDetlev Zundel2006-09-011-6/+13
| | |_|_|/ | |/| | | | | | | | | | | | | coding style.
* | | | | Merge branch 'mpc85xx'Jon Loeliger2006-08-091-0/+54
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/ft_build.h include/pci.h Resolved, though.
| * | | | * Modify bootm command to support booting with flat device trees Patch by ↵Matthew McClintock2006-08-091-0/+54
| | |_|/ | |/| | | | | | | | | | Matthew McClintock 26-June-2006
OpenPOWER on IntegriCloud