summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* post, i2c: add missing curly bracket in i2c_post_testHeiko Schocher2010-11-171-1/+2
| | | | | | | | If CONFIG_SYS_POST_I2C_ADDRS is not defined and CONFIG_SYS_POST_I2C is activated, i2c_probe() is not called in the for statement, because missing curly bracket. Signed-off-by: Heiko Schocher <hs@denx.de>
* i2c, mpc5xxx: add multibus supportHeiko Schocher2010-11-171-0/+43
| | | | | | Tested on upcoming hydra (mpc5200 based) board. Signed-off-by: Heiko Schocher <hs@denx.de>
* Net: clarify board/cpu_eth_init callsBen Warren2010-11-151-4/+12
| | | | | | | | | | | This has always been confusing, and the idea of these functions returning the number of interfaces initialized was half-baked and ultimately pointless. Instead, act more like regular functions and return < 0 on failure, >= 0 on success. This change shouldn't break anything. Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Makefile: move include for config.mk upFrançois Revol2010-11-141-6/+6
| | | | | | | | | | Reorder including config.mk before the HOSTCC check, so HOSTCC is actually defined when checking for it. Signed-off-by: François Revol <revol@free.fr> Cleaned up commit message Signed-off-by: Wolfgang Denk <wd@denx.de>
* MAKEALL: Do a sanity check on user-supplied argumentsPeter Tyser2010-11-141-1/+7
| | | | | | | | | | | | | | Add a check to make sure that the user's arguments actually find a board in boards.cfg. Previously, if a user misspelled an argument the argument would be discarded without warning. For example, running 'MAKEALL -c 85xx' with the intention of compiling all Freescale 85xx boards would instead silently discard the '-c 85xx' argument since the proper cpu name is 'mpc85xx' and then proceed to compile all PowerPC boards (MAKEALL's default). Also fix an unrelated typo. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* pci: Use intelligent indentation for CONFIG_PCI_SCAN_SHOWPeter Tyser2010-11-141-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_PCI_SCAN_SHOW is defined U-Boot prints out PCI devices as they are found during bootup, eg: PCIE1: connected as Root Complex 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 03:00.0 - 10b5:8112 - Bridge device 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 07:00.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:01.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:02.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d This information is useful, but its difficult to determine the PCI bus topology. To things clearer, we can use indention to make it more obvious how the PCI bus is organized. For the example above, the updated output with this change is: PCIE1: connected as Root Complex 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 03:00.0 - 10b5:8112 - Bridge device 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 07:00.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:01.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:02.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d In the examples above, an MPC8640 is connected to a PEX8518 PCIe switch (01:00 and 02:0x), which is connected to another PEX8518 PCIe switch (06:00 and 07:0x), which then connects to a MPC8572 processor (08:00). Also, the MPC8640's PEX8518 PCIe switch is connected to a PCI ethernet card (04:01) via a PEX8112 PCIe-to-PCI bridge (03:00). Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* pci: Fix ordering of devices when CONFIG_PCI_SCAN_SHOWPeter Tyser2010-11-141-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the printing of PCI device information to before the PCI device is configured. This prevents the case where recursive scanning results in the deepest devices being printed first. This change also makes PCI lockups during enumeration easier to diagnose since the device that is being configured is printed out prior to configuration. Previously, it was not possible to determine which device caused the PCI lockup. Original example: PCIE1: connected as Root Complex 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 03:00.0 - 10b5:8112 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 02:02.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:00.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:01.0 - 10b5:8518 - Bridge device 07:02.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 01:00.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b Updated example: PCIE1: connected as Root Complex 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 03:00.0 - 10b5:8112 - Bridge device 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 07:00.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:01.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:02.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOWPeter Tyser2010-11-143-92/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change does the following: - Removes the printing of the PCI interrupt line value. This is normally set to 0 by U-Boot on bootup and is rarely used during everyday operation. - Prints out the PCI function number of a device. Previously a device with multiple functions would be printed identically 2 times, which is generally confusing. For example, on an Intel 2 port gigabit Ethernet card the following was displayed: ... 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 ... - Prints a text description of each device's PCI class instead of the raw PCI class code. The textual description makes it much easier to determine what devices are installed on a PCI bus. - Changes the general formatting of the PCI device output. Previous output: PCIE1: connected as Root Complex 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d Updated output: PCIE1: connected as Root Complex 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 03:00.0 - 10b5:8112 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 02:02.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:00.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:01.0 - 10b5:8518 - Bridge device 07:02.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 01:00.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* fsl_pci_init: Quiet scanning printf()Peter Tyser2010-11-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "Scanning PCI bus X" message doesn't provide any real useful information, so remove it. Original output: PCIE1: connected as Root Complex Scanning PCI bus 01 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex Scanning PCI bus 0d 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d Updated output: PCIE1: connected as Root Complex 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: galak@kernel.crashing.org
* mpc85xx: Fix SERDES/eTSEC message indentationPeter Tyser2010-11-146-17/+17
| | | | | | | | | | | | | Previously some mpc85xx boards printed indented messages such as the following on bootup: printf(" eTSEC4 is in sgmii mode.\n"); printf(" Serdes2 disalbed\n"); The bootup appearance looks cleaner if the indentation is removed which aligns these messages with other bootup output. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: galak@kernel.crashing.org
* fsl: Clean up printing of PCI boot infoPeter Tyser2010-11-1424-147/+147
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously boards used a variety of indentations, newline styles, and colon styles for the PCI information that is printed on bootup. This patch unifies the style to look like: ... NAND: 1024 MiB PCIE1: connected as Root Complex Scanning PCI bus 01 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex Scanning PCI bus 0d 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d In: serial ... Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: wd@denx.de CC: sr@denx.de CC: galak@kernel.crashing.org
* fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe awarePeter Tyser2010-11-141-1/+5
| | | | | | | | | | | | | | | | Previously fsl_pci_init_port() always assumed that a port was a PCIe port and would incorrectly print messages for a PCI port such as the following on bootup: PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCIE1 on bus 00 - 00 This change corrects the output of fsl_pci_init_port(): PCI1: 32 bit, 33 MHz, sync, host, arbiter Scanning PCI bus 00 PCI1 on bus 00 - 00 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* net: Fix potential empty DHCP Parameter Request ListJason Liu2010-11-141-0/+4
| | | | | | | | | | Can't get IP address with dhcp due to the dhcp server not allow the empty param list request under some network env This patch is based on Gray Remlin's initial patch. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Gray Remlin <g_remlin@rocketmail.com>
* env_mmc: fix compile warningLei Wen2010-11-141-0/+1
| | | | | | | | | | hexport would complain implicit declaration, if we don't add the include file. env_mmc.c: In function 'saveenv': env_mmc.c:109: warning: implicit declaration of function 'hexport' Signed-off-by: Lei Wen <leiwen@marvell.com>
* tools/env: cleanup host build flagsDaniel Hobi2010-11-141-5/+10
| | | | | | | | | | | | | | | | | This patch makes tools/env/Makefile more similar to tools/imls: - define HOSTSRCS and HOSTCPPFLAGS, so that .depend generation works. - include U-Boot headers using -idirafter to prevent picking up u-boot/include/errno.h. - use HOSTCFLAGS_NOPED (fw_env.c does not conform to -pedantic). In order to cross-compile tools/env, override the HOSTCC variable as in this example: make tools env HOSTCC=bfin-uclinux-gcc Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch> Tested-by: Detlev Zundel <dzu@denx.de> Tested-by: Steve Sakoman <steve.sakoman@linaro.org>
* PowerPC: Don't destroy fixup table while doing fixupsJoakim Tjernlund2010-11-1412-12/+12
| | | | | | | | | The fixup procedure just stored a constant value in the fixup table rather than just adjusting the table. Although that doesn't seem to do any harm, it prevents relocation more that once. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* net: e1000: Add initialized eth_device & e1000_hw structureKumar Gala2010-11-141-0/+14
| | | | | | | | | | | | | | nic and hw structures are allocated via malloc i.e. return memory is not zero initialized. Because of this few structure member like "function pointers" are initialized with garbage values. It may cause problem. for eg. during eth_initialize, dev->write_hwaddr is used. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Fixed typo. Signed-off-by: Wolfgang Denk <wd@denx.de>
* net: uli526x: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | uli526x driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: tsi108_eth: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-1/+5
| | | | | | | | | tsi108_eth driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: pcnet: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | pcnet driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: ns8382x: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | ns8382x driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: natsemi: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | natsemi driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: fec_mxc: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+1
| | | | | | | This prevents access to the member of eth_device which is not initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: eepro100: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | eepro100 driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: dc2114x: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+6
| | | | | | | | | dc2114x driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: rtl8139: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | rtl8139 driver does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* net: rtl8169: Add initialized eth_device structureNobuhiro Iwamatsu2010-11-141-0/+5
| | | | | | | | | rtl8169 does not have write_hwaddr function. However, eth stuff executes write_hwaddr function because eth_device structure has not been initialized. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-1317-76/+89
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-11-1317-76/+89
| |\
| | * TQM85xx: Fix bug introduced by 83xx/85xx/86xx: LBC register cleanupBecky Bruce2010-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size of the other bank needed to be added to the br0 setting; this got dropped in the LBC cleanup. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Tested-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/corenet_ds: display the RCW at bootTimur Tabi2010-11-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Display the 64-byte Reset Configuration Word (RCW) during boot, so that there's no confusion as to what RCW U-boot is using. Reset Configuration Word (RCW): 00000000: 4a500000 00000000 18181818 00008888 00000010: 28402400 00002000 fe800000 01200000 00000020: 00000000 00000000 00000000 000b0000 00000030: 00000000 00000000 00000000 00000000 Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/p4080ds: Move ICS refclk define into P4080DS.hKumar Gala2010-11-122-1/+2
| | | | | | | | | | | | | | | | | | | | | We appear to have different refclk's on the different corenet DS boards so move the define out of the common header. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/corenet_ds: Move CONFIG_SYS_TEXT_BASE into corenet_ds.hKumar Gala2010-11-122-4/+4
| | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_TEXT_BASE setting is common across the 'corenet_ds' board family so move it out of P4080DS.h and into corenet_ds.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/corenet_ds: Enable DHCP suportKumar Gala2010-11-121-0/+1
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * p1_p2_rdb: to set SQW/INT pin of RTC as INT linePriyanka Jain2010-11-122-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SQW/INT pin in RTC can be used for generating square wave(by default) or as interrupt line. U-boot is registering this pin for interrupts. Configuring SQW/INT bit as interrupt line during board initialization to avoid spurious interrupts generated by square wave. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/85xx: add CONFIG_SYS_TEXT_BASE_SPL for 85xx nand spl buildHaiying Wang2010-11-126-13/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a SPL specific CONFIG_SYS_TEXT_BASE_SPL define to be used by the linker. This has similiar semantics to CONFIG_SYS_TEXT_BASE however since SPL is a unqiue image we introduce a new variable to control its text base address. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/85xx: rename CONFIG_SYS_TEXT_BASE to CONFIG_SYS_MONITOR_BASEHaiying Wang2010-11-111-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_SYS_MONITOR_BASE instead of CONFIG_SYS_TEXT_BASE in early init code so we can share the same code with NAND or NOR boot and not have additional ifdefs in here. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/85xx: Fix lds for nand buildHaiying Wang2010-11-112-46/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix u-boot-nand.lds and u-boot-nand_spl.lds according to: Author: Peter Tyser <ptyser@xes-inc.com> Date: Wed Sep 29 14:05:56 2010 -0500 commit fbe53f59bd40b3b1ab66dc98859e26589d64d1b7 85xx: Use gc-sections to reduce image size Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/8xxx: Enable e1000 driver on some FSL boardsKumar Gala2010-11-103-0/+3
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * powerpc/8xxx: Fix merge issue with P2020DS DDR2 build configKumar Gala2010-11-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When P2020DS DDR2 was merged it was merged incorrectly and propogated to boards.cfg. Fix this by moving DDR2 config to be associated with P2020DS and not P1_P2_RDB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-134-0/+329
|\ \ \ | |/ /
| * | sf: ramtron: new spi fram driverReinhard Meyer2010-11-104-0/+329
| |/ | | | | | | | | | | | | Supports most types that support Read-Id and the FM25H20. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | env_sf: remove warning introduced with last patchStefano Babic2010-10-291-2/+1
|/ | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk2010-10-2918-191/+90
|\ | | | | | | | | | | | | Conflicts: include/configs/km_arm.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Kirkwood: bugfix: DRAM size initializationTanmay Upadhyay2010-10-281-0/+10
| | | | | | | | | | | | | | | | | | If start of any DRAM bank is greater than total DDR size, remaining DDR banks' start address & size were left un-initialized in dram_init function. This could break other functions who uses array 'gd->bd->bi_dram'. Kirkwood network driver is one example. This also stops Linux kernel from booting. v2 - Set start address also to 0. Without this Linux kernel couldn't boot up Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
| * kirkwood: get rid of config.mk filesPrafulla Wadaskar2010-10-289-173/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After moving the definition of CONFIG_SYS_TEXT_BASE to the respective board config files, all Marvell kirkwood board have just a single and common entry in their config.mk files: KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg Replace the only reference to KWD_CONFIG in the top level Makefile by an equivalent setting, and remove all kirkwood config.mk files. Signed-off-by: Wolfgang Denk <wd at denx.de> Cc: Prafulla Wadaskar <prafulla at marvell.com> Cc: Siddarth Gore <gores at marvell.com> Cc: Simon Kagstrom <simon.kagstrom at netinsight.net> Cc: Heiko Schocher <hs at denx.de> Cc: Eric Cooper <ecc at cmu.edu> Acked-by: Wolfgang Denk <wd at denx.de> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * kirkwood: guruplug: Relocate NAND environment areaGray Remlin2010-10-281-2/+2
| | | | | | | | | | | | Current default options increase u-boot size to overlap the location of the environment in NAND, move environment higher up Signed-off-by: Gray Remlin <g_remlin@rocketmail.com>
| * Kirkwood: bugfix: broken early console messagesPrafulla Wadaskar2010-10-206-5/+26
| | | | | | | | | | | | | | | | | | | | | | It has been observed that, the complete u-boot banner does not appear on the console when the system is booted from NAND/NOR/SPI flash. This patch fixes this issue on all Marvell boards by adding board_early_init_f() support Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * arm926ejs, suen3: fix relocation issuesHeiko Schocher2010-10-202-11/+19
| | | | | | | | | | | | | | | | - use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f() Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-2910-116/+80
|\ \
OpenPOWER on IntegriCloud