diff options
Diffstat (limited to 'lib_i386/ic/sc520_asm.S')
| -rw-r--r-- | lib_i386/ic/sc520_asm.S | 530 |
1 files changed, 530 insertions, 0 deletions
diff --git a/lib_i386/ic/sc520_asm.S b/lib_i386/ic/sc520_asm.S new file mode 100644 index 0000000000..72110c4a0a --- /dev/null +++ b/lib_i386/ic/sc520_asm.S @@ -0,0 +1,530 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* This file is largely based on code obtned from AMD. AMD's original + * copyright is included below + */ + +/* + * ============================================================================= + * + * Copyright 1999 Advanced Micro Devices, Inc. + * + * This software is the property of Advanced Micro Devices, Inc (AMD) which + * specifically grants the user the right to modify, use and distribute this + * software provided this COPYRIGHT NOTICE is not removed or altered. All + * other rights are reserved by AMD. + * + * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY + * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF + * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. + * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER + * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS + * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY + * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR + * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE + * LIMITATION MAY NOT APPLY TO YOU. + * + * AMD does not assume any responsibility for any errors that may appear in + * the Materials nor any responsibility to support or update the Materials. + * AMD retains the right to make changes to its test specifications at any + * time, without notice. + * + * So that all may benefit from your experience, please report any problems + * or suggestions about this software back to AMD. Please include your name, + * company, telephone number, AMD product requiring support and question or + * problem encountered. + * + * Advanced Micro Devices, Inc. Worldwide support and contact + * Embedded Processor Division information available at: + * Systems Engineering epd.support@amd.com + * 5204 E. Ben White Blvd. -or- + * Austin, TX 78741 http://www.amd.com/html/support/techsup.html + * ============================================================================ + */ + + +/******************************************************************************* + * AUTHOR : Buddy Fey - Original. + ******************************************************************************* + */ + + +/******************************************************************************* + * FUNCTIONAL DESCRIPTION: + * This routine is called to autodetect the geometry of the DRAM. + * + * This routine is called to determine the number of column bits for the DRAM + * devices in this external bank. This routine assumes that the external bank + * has been configured for an 11-bit column and for 4 internal banks. This gives + * us the maximum address reach in memory. By writing a test value to the max + * address and locating where it aliases to, we can determine the number of valid + * column bits. + * + * This routine is called to determine the number of internal banks each DRAM + * device has. The external bank (under test) is configured for maximum reach + * with 11-bit columns and 4 internal banks. This routine will write to a max + * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if + * that column is a "don't care". If BA1 does not affect write/read of data, + * then this device has only 2 internal banks. + * + * This routine is called to determine the ending address for this external + * bank of SDRAM. We write to a max address with a data value and then disable + * row address bits looking for "don't care" locations. Each "don't care" bit + * represents a dividing of the maximum density (128M) by 2. By dividing the + * maximum of 32 4M chunks in an external bank down by all the "don't care" bits + * determined during sizing, we set the proper density. + * + * WARNINGS. + * bp must be preserved because it is used for return linkage. + * + * EXIT + * nothing returned - but the memory subsystem is enabled + ******************************************************************************* + */ + +.section .text +.equ DRCCTL, 0x0fffef010 /* DRAM control register */ +.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */ +.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */ +.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */ +.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */ +.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */ + +.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */ +.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */ +.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */ +.equ COL09_ADR, 0x0e000600 /* 9 col addrs */ +.equ COL08_ADR, 0x0e000200 /* 8 col addrs */ +.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */ +.equ ROW13_ADR, 0x07000000 /* 13 row addrs */ +.equ ROW12_ADR, 0x03000000 /* 12 row addrs */ +.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */ +.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */ +.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */ +.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */ +.equ COL09_DATA, 0x09090909 /* 9 col data */ +.equ COL08_DATA, 0x08080808 /* 8 col data */ +.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */ +.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */ +.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */ +.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */ +.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */ + + + /* + * initialize dram controller registers + */ +.globl mem_init +mem_init: + xorw %ax,%ax + movl $DBCTL, %edi +fs movb %al, (%edi) /* disable write buffer */ + + movl $ECCCTL, %edi +fs movb %al, (%edi) /* disable ECC */ + + movl $DRCTMCTL, %edi + movb $0x1E,%al /* Set SDRAM timing for slowest */ +fs movb %al, (%edi) + + /* + * setup loop to do 4 external banks starting with bank 3 + */ + movl $0xff000000,%eax /* enable last bank and setup */ + movl $DRCBENDADR, %edi /* ending address register */ +fs movl %eax, (%edi) + + movl $DRCCFG, %edi /* setup */ + movw $0xbbbb,%ax /* dram config register for */ +fs movw %ax, (%edi) + + /* + * issue a NOP to all DRAMs + */ + movl $DRCCTL, %edi /* setup DRAM control register with */ + movb $0x1,%al /* Disable refresh,disable write buffer */ +fs movb %al, (%edi) + movl $CACHELINESZ, %esi /* just a dummy address to write for */ +fs movw %ax, (%esi) + /* + * delay for 100 usec? 200? + * ******this is a cludge for now ************* + */ + movw $100,%cx +sizdelay: + loop sizdelay /* we need 100 usec here */ + /***********************************************/ + + /* + * issue all banks precharge + */ + movb $0x2,%al /* All banks precharge */ +fs movb %al, (%edi) +fs movw %ax, (%esi) + + /* + * issue 2 auto refreshes to all banks + */ + movb $0x4,%al /* Auto refresh cmd */ +fs movb %al, (%edi) + movw $2,%cx +refresh1: +fs movw %ax, (%esi) + loop refresh1 + + /* + * issue LOAD MODE REGISTER command + */ + movb $0x3,%al /* Load mode register cmd */ +fs movb %al, (%edi) +fs movw %ax, (%esi) + + /* + * issue 8 more auto refreshes to all banks + */ + movb $0x4,%al /* Auto refresh cmd */ +fs movb %al, (%edi) + movw $8,%cx +refresh2: +fs movw %ax, (%esi) + loop refresh2 + + /* + * set control register to NORMAL mode + */ + movb $0x0,%al /* Normal mode value */ +fs movb %al, (%edi) + + /* + * size dram starting with external bank 3 moving to external bank 0 + */ + movl $0x3,%ecx /* start with external bank 3 */ + +nextbank: + + /* + * write col 11 wrap adr + */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ + movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ +fs movl %eax, (%esi) /* write max col pattern at max col adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 10 wrap adr + */ + + movl $COL10_ADR, %esi /* set address to 10 col wrap address */ + movl $COL10_DATA, %eax /* pattern for 10 col wrap */ +fs movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 9 wrap adr + */ + movl $COL09_ADR, %esi /* set address to 9 col wrap address */ + movl $COL09_DATA, %eax /* pattern for 9 col wrap */ +fs movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write col 8 wrap adr + */ + movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ + movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ +fs movl %eax, (%esi) /* write min col pattern @ min col adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 14 wrap adr + */ + movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ + movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ +fs movl %eax, (%esi) /* write max row pattern at max row adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 13 wrap adr + */ + movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ + movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ +fs movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 12 wrap adr + */ + movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ + movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ +fs movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ +fs movl (%esi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 11 wrap adr + */ + movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ + movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ +fs movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ +fs movl (%edi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * write row 10 wrap adr --- this write is really to determine number of banks + */ + movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ + movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ +fs movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ +fs movl (%edi), %ebx /* optional read */ + cmpl %ebx,%eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + /* + * read data @ row 12 wrap adr to determine * banks, + * and read data @ row 14 wrap adr to determine * rows. + * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. + * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 + * if data @ row 12 wrap == 11 or 12, we have 4 banks, + */ + xorw %di,%di /* value for 2 banks in DI */ +fs movl (%esi), %ebx /* read from 12 row wrap to check banks + * (esi is setup from the write to row 12 wrap) */ + cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */ + jz only2 /* if pattern == AA, we only have 2 banks */ + + /* 4 banks */ + + movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */ + cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ + jz only2 + cmpl $ROW12_DATA, %ebx /* and 12 */ + jnz bad_ram /* its bad if not 11 or 12! */ + + /* fall through */ +only2: + /* + * validate row mask + */ + movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ +fs movl (%esi), %eax /* read actual number of rows @ row14 adr */ + + cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ + jb bad_ram + + cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ + ja bad_ram + + cmpb %ah,%al /* verify all 4 bytes of dword same */ + jnz bad_ram + movl %eax,%ebx + shrl $16,%ebx + cmpw %bx,%ax + jnz bad_ram + /* + * read col 11 wrap adr for real column data value + */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ +fs movl (%esi), %eax /* read real col number at max col adr */ + /* + * validate column data + */ + cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ + jb bad_ram + + cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ + ja bad_ram + + subl $COL08_DATA, %eax /* normalize column data to zero */ + jc bad_ram + cmpb %ah,%al /* verify all 4 bytes of dword equal */ + jnz bad_ram + movl %eax,%edx + shrl $16,%edx + cmpw %dx,%ax + jnz bad_ram + /* + * merge bank and col data together + */ + addw %di,%dx /* merge of bank and col info in dl */ + /* + * fix ending addr mask based upon col info + */ + movb $3,%al + subb %dh,%al /* dh contains the overflow from the bank/col merge */ + movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ + xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ + shrb %cl,%dh /* */ + incb %dh /* ending addr is 1 greater than real end */ + xchgw %cx,%ax /* cx is bank number again */ + /* + * issue all banks precharge + */ +bad_reint: + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x2,%al /* All banks precharge */ +fs movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ +fs movw %ax, (%esi) + + /* + * update ENDING ADDRESS REGISTER + */ + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movl %ecx,%ebx + addl %ebx, %edi +fs movb %dh, (%edi) + /* + * update CONFIG REGISTER + */ + xorb %dh,%dh + movw $0x00f,%bx + movw %cx,%ax + shlw $2,%ax + xchgw %cx,%ax + shlw %cl,%dx + shlw %cl,%bx + notw %bx + xchgw %cx,%ax + movl $DRCCFG, %edi +fs mov (%edi), %ax + andw %bx,%ax + orw %dx,%ax +fs movw %ax, (%edi) + jcxz cleanup + + decw %cx + movl %ecx,%ebx + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movb $0xff,%al + addl %ebx, %edi +fs movb %al, (%edi) + /* + * set control register to NORMAL mode + */ + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x0,%al /* Normal mode value */ +fs movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ +fs movw %ax, (%esi) + jmp nextbank + +cleanup: + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movw $4,%cx + xorw %ax,%ax +cleanuplp: +fs movb (%edi), %al + orb %al,%al + jz emptybank + + addb %ah,%al + jns nottoomuch + + movb $0x7f,%al +nottoomuch: + movb %al,%ah + orb $0x80,%al +fs movb %al, (%edi) +emptybank: + incl %edi + loop cleanuplp + +#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T) + /* set the CAS latency now since it is hard to do + * when we run from the RAM */ + movl $DRCTMCTL, %edi /* DRAM timing register */ + movb (%edi), %al +#ifdef CFG_SDRAM_CAS_LATENCY_2T + andb $0xef, %al +#endif +#ifdef CFG_SDRAM_CAS_LATENCY_3T + orb $0x10, %al +#endif + movb %al, (%edi) +#endif + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x3,%al /* Load mode register cmd */ +fs movb %al, (%edi) +fs movw %ax, (%esi) + + + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x18,%al /* Enable refresh and NORMAL mode */ +fs movb %al, (%edi) + + jmp dram_done + +bad_ram: + xorl %edx,%edx + xorl %edi,%edi + jmp bad_reint + +dram_done: + + /* readback DRCBENDADR and return the number + * of available ram bytes in %eax */ + + movl $DRCBENDADR, %edi /* DRAM ending address register */ + + movl (%edi), %eax + movl %eax, %ecx + andl $0x80000000, %ecx + jz bank2 + andl $0x7f000000, %eax + shrl $2, %eax + movl %eax, %ebx + +bank2: movl (%edi), %eax + movl %eax, %ecx + andl $0x00800000, %ecx + jz bank1 + andl $0x007f0000, %eax + shll $6, %eax + movl %eax, %ebx + +bank1: movl (%edi), %eax + movl %eax, %ecx + andl $0x00008000, %ecx + jz bank0 + andl $0x00007f00, %eax + shll $14, %eax + movl %eax, %ebx + +bank0: movl (%edi), %eax + movl %eax, %ecx + andl $0x00000080, %ecx + jz done + andl $0x0000007f, %eax + shll $22, %eax + movl %eax, %ebx + +done: movl %ebx, %eax + + jmp *%ebp |
