diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/xilinx_zynqmp.h | 7 | ||||
-rw-r--r-- | include/configs/xilinx_zynqmp_ep.h | 3 | ||||
-rw-r--r-- | include/configs/zynq-common.h | 29 | ||||
-rw-r--r-- | include/configs/zynq_microzed.h | 3 | ||||
-rw-r--r-- | include/configs/zynq_picozed.h | 3 | ||||
-rw-r--r-- | include/configs/zynq_zc70x.h | 3 | ||||
-rw-r--r-- | include/configs/zynq_zc770.h | 4 | ||||
-rw-r--r-- | include/configs/zynq_zed.h | 3 | ||||
-rw-r--r-- | include/configs/zynq_zybo.h | 3 | ||||
-rw-r--r-- | include/netdev.h | 3 |
10 files changed, 11 insertions, 50 deletions
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 474bbaff05..50ac5f531c 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -184,10 +184,8 @@ #define CONFIG_SYS_MAXARGS 64 /* Ethernet driver */ -#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \ - defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3) +#if defined(CONFIG_ZYNQ_GEM) # define CONFIG_NET_MULTI -# define CONFIG_ZYNQ_GEM # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHYLIB @@ -224,9 +222,6 @@ #define CONFIG_CMD_SCSI #endif -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) #define CONFIG_CMD_BOOTI diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index b7d506e5e7..ec39211af3 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -15,9 +15,6 @@ #ifndef __CONFIG_ZYNQMP_EP_H #define __CONFIG_ZYNQMP_EP_H -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 - #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 #define CONFIG_ZYNQ_I2C0 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index fa83ac7b15..0ab60839b6 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -46,23 +46,15 @@ #define CONFIG_ZYNQ_GPIO /* Ethernet driver */ -#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) -# define CONFIG_ZYNQ_GEM +#if defined(CONFIG_ZYNQ_GEM) # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_PHYLIB # define CONFIG_PHY_MARVELL # define CONFIG_BOOTP_SERVERIP # define CONFIG_BOOTP_BOOTPATH # define CONFIG_BOOTP_GATEWAY # define CONFIG_BOOTP_HOSTNAME # define CONFIG_BOOTP_MAY_FAIL -# if !defined(CONFIG_ZYNQ_GEM_EMIO0) -# define CONFIG_ZYNQ_GEM_EMIO0 0 -# endif -# if !defined(CONFIG_ZYNQ_GEM_EMIO1) -# define CONFIG_ZYNQ_GEM_EMIO1 0 -# endif #endif /* SPI */ @@ -298,7 +290,6 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) -# define CONFIG_API # define CONFIG_SYS_MMC_MAX_DEVICE 1 #endif @@ -376,16 +367,16 @@ /* The highest 64k OCM address */ #define OCM_HIGH_ADDR 0xffff0000 -/* Just define any reasonable size */ -#define CONFIG_SPL_STACK_SIZE 0x1000 - -/* SPL stack position - and stack goes down */ -#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE) - /* On the top of OCM space */ -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000 +#define CONFIG_SYS_SPL_MALLOC_START OCM_HIGH_ADDR +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x2000 + +/* + * SPL stack position - and stack goes down + * 0xfffffe00 is used for putting wfi loop. + * Set it up as limit for now. + */ +#define CONFIG_SPL_STACK 0xfffffe00 /* BSS setup */ #define CONFIG_SPL_BSS_START_ADDR 0x100000 diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index b5ffafb561..169ee36d3f 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 - #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 diff --git a/include/configs/zynq_picozed.h b/include/configs/zynq_picozed.h index ffc73bd0e3..47fad66acd 100644 --- a/include/configs/zynq_picozed.h +++ b/include/configs/zynq_picozed.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 - #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI1 diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 468a6bc7bf..c52a6552e7 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 - #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index dbc829e6e4..32ea1f37d6 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -15,8 +15,6 @@ #define CONFIG_SYS_NO_FLASH #if defined(CONFIG_ZC770_XM010) -# define CONFIG_ZYNQ_GEM0 -# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 #elif defined(CONFIG_ZC770_XM011) @@ -25,8 +23,6 @@ # undef CONFIG_SYS_NO_FLASH #elif defined(CONFIG_ZC770_XM013) -# define CONFIG_ZYNQ_GEM1 -# define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 #endif diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index 6ec6117f17..1488bfe165 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 - #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_USB diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index e2270cd2ea..5d1a9d5572 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -13,9 +13,6 @@ #define CONFIG_SYS_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 - #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 diff --git a/include/netdev.h b/include/netdev.h index 28eab46407..de74b9a534 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -87,9 +87,6 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int txpp, int rxpp); int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); -int zynq_gem_of_init(const void *blob); -int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr, - int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface * exported by a public hader file, we need a global definition at this point. |