diff options
Diffstat (limited to 'include')
39 files changed, 1483 insertions, 824 deletions
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 9702d63eb8..c8e0ff287b 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -139,9 +139,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 9613ed9a82..ce731e387d 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -149,9 +149,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 04d97cd1dc..44d45e3b3a 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -324,7 +324,7 @@ #define CONFIG_SYS_SCCR_TSEC1CM 1 #define CONFIG_SYS_SCCR_TSEC2CM 1 -#define CONFIG_SYS_SICRH 0x1fff8003 +#define CONFIG_SYS_SICRH 0x1fef0003 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0) #define CONFIG_SYS_HID0_INIT 0x000000000 diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index ad86e2e23a..f336e8d0bc 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -251,10 +251,10 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* List of I2C addresses to be verified by POST */ -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_SLAVE} /* * Flash configuration diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2612c7a50b..794e11b024 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -370,10 +370,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 24a04ebefb..f18bc45c4d 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -147,27 +147,43 @@ #define CONFIG_PREBOOT "run try_update" #define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \ - "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \ - "hostname=CPUP0\0" \ - "ethaddr=00:00:00:00:00:00\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ + "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ + "cf1=diskboot 200000 0:1\0" \ + "bootcmd_cf1=run bcf1\0" \ + "bcf=setenv bootargs root=/dev/hda3\0" \ + "bootcmd_nfs=run bnfs\0" \ + "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ + "panic=1\0" \ + "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ + "run norargs addip; run bk\0" \ + "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ + "run nfsargs addip ; run bk\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "try_update=usb start;sleep 2;usb start;sleep 1;" \ + "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ + "source 2F0000\0" \ + "env_addr=FE060000\0" \ + "kernel_addr=FE100000\0" \ + "rootfs_addr=FE200000\0" \ + "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ + "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ + "bcf1=run cf1; run bcf; run addip; run bk\0" \ + "add_consolespec=setenv bootargs ${bootargs} " \ + "console=/dev/null quiet\0" \ + "addip=if test -n ${ethaddr};" \ + "then if test -n ${ipaddr};" \ + "then setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:"\ + "${netmask}:${hostname}:${netdev}:off;" \ + "fi;" \ + "else;" \ + "setenv bootargs ${bootargs} no_ethaddr;" \ + "fi\0" \ + "hostname=CPUP0\0" \ + "ethaddr=00:00:00:00:00:00\0" \ + "netdev=eth0\0" \ + "bootcmd=run bootcmd_nor\0" \ "" /* * IPB Bus clocking configuration. @@ -212,6 +228,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} +#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} /* * Environment settings diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h index 98b69e3712..a0726a9efe 100644 --- a/include/configs/cerf250.h +++ b/include/configs/cerf250.h @@ -38,6 +38,7 @@ #define CONFIG_CERF250 1 /* on Cerf PXA Board */ #define BOARD_LATE_INIT 1 #define CONFIG_BAUDRATE 38400 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -140,15 +141,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ @@ -187,6 +182,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -196,6 +194,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x00001AC9 #define CONFIG_SYS_MDREFR_VAL 0x03CDC017 #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 1b129a2e66..af6769b18d 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -80,7 +80,9 @@ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C) #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ + CONFIG_SYS_I2C_IO, \ + CONFIG_SYS_I2C_EEPROM} /* display image timestamps */ #define CONFIG_TIMESTAMP 1 diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 5f457f80de..afc15378bf 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -39,7 +39,7 @@ #define CONFIG_ENV_SIZE 0x4000 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 - +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_ENV_OVERWRITE /* override default environment */ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 85147d0021..2733fb21e3 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -213,7 +213,7 @@ #endif #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET diff --git a/include/configs/cradle.h b/include/configs/cradle.h index d1c1a48e0c..3da35623c0 100644 --- a/include/configs/cradle.h +++ b/include/configs/cradle.h @@ -39,7 +39,7 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE - +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Size of malloc() pool */ @@ -126,15 +126,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x01000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #1 */ @@ -289,9 +283,9 @@ * Clocks, power control and interrupts */ #define CONFIG_SYS_PSSR_VAL 0x00000020 -#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* FIXME * @@ -319,6 +313,8 @@ #define CONFIG_SYS_MDMRS_VAL 0x00000000 #define CONFIG_SYS_MDREFR_VAL 0x00403018 /* Initial setting, individual bits set in lowlevel_init.S */ #endif +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) diff --git a/include/configs/csb226.h b/include/configs/csb226.h index ae05734a09..72e47ce7a8 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -45,7 +45,7 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE - +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Hardware drivers */ @@ -458,6 +458,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -468,6 +471,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 #define CONFIG_SYS_MDREFR_VAL 0x038ff030 #define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces diff --git a/include/configs/delta.h b/include/configs/delta.h deleted file mode 100644 index d53acbfebc..0000000000 --- a/include/configs/delta.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * Configuation settings for the Delta board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ -#define CONFIG_CPU_PXA320 -#define CONFIG_DELTA 1 /* Delta board */ - -/* #define CONFIG_LCD 1 */ -#ifdef CONFIG_LCD -#define CONFIG_SHARP_LM8V31 -#endif -#define BOARD_LATE_INIT 1 - -#undef CONFIG_SKIP_RELOCATE_UBOOT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ -#undef TURN_ON_ETHERNET -#ifdef TURN_ON_ETHERNET -# define CONFIG_DRIVER_SMC91111 1 -# define CONFIG_SMC91111_BASE 0x14000300 -# define CONFIG_SMC91111_EXT_PHY -# define CONFIG_SMC_USE_32_BIT -# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ -#endif - -#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */ -#define CONFIG_SYS_I2C_SLAVE 1 /* I2C controllers address */ -#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ -#define CONFIG_SYS_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ -#define CONFIG_SYS_I2C_INIT_BOARD 1 -/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ - -#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ -#define CONFIG_PREBOOT "\0" - -#ifdef DELTA_CHECK_KEYBD -# define KEYBD_DATALEN 4 /* we have four keys */ -# define KEYBD_KP_DKIN0 0x1 /* vol+ */ -# define KEYBD_KP_DKIN1 0x2 /* vol- */ -# define KEYBD_KP_DKIN2 0x3 /* multi */ -# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */ -#endif /* DELTA_CHECK_KEYBD */ - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#ifdef TURN_ON_ETHERNET - -#define CONFIG_CMD_PING - -#else - -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_NAND -#define CONFIG_CMD_I2C - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS - -#endif - -/* USB */ -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 - -#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */ - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE OHCI_REGS_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "delta" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 - -#define CONFIG_BOOTDELAY -1 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 80000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG -#define CONFIG_TIMESTAMP - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0x80400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ - -#define CONFIG_SYS_HZ 1000 - -/* Monahans Core Frequency */ -#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ -#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ - - - /* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ - -#define CONFIG_SYS_DRAM_BASE 0x80000000 /* at CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB Ram */ - -#undef CONFIG_SYS_SKIP_DRAM_SCRUB - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* - * NAND Flash - */ -#define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ -#undef CONFIG_SYS_NAND1_BASE - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ - -/* nand timeout values */ -#define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 -#define CONFIG_SYS_NAND_OTHER_TO 100 -#define CONFIG_SYS_NAND_SENDCMD_RETRY 3 -#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ - -/* NAND Timing Parameters (in ns) */ -#define NAND_TIMING_tCH 10 -#define NAND_TIMING_tCS 0 -#define NAND_TIMING_tWH 20 -#define NAND_TIMING_tWP 40 - -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 - -#define NAND_TIMING_tR 11123 -#define NAND_TIMING_tWHR 100 -#define NAND_TIMING_tAR 10 - -/* NAND debugging */ -#define CONFIG_SYS_DFC_DEBUG1 /* usefull */ -#undef CONFIG_SYS_DFC_DEBUG2 /* noisy */ -#undef CONFIG_SYS_DFC_DEBUG3 /* extremly noisy */ - -#define CONFIG_MTD_DEBUG -#define CONFIG_MTD_DEBUG_VERBOSE 1 - -#define CONFIG_SYS_NO_FLASH 1 - -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_OFFSET_REDUND 0x44000 -#define CONFIG_ENV_SIZE 0x4000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 007ccebf43..01522cdebd 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -40,6 +40,8 @@ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* for timer/console/ethernet */ +#define CONFIG_SYS_TEXT_BASE 0x0 + /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE @@ -347,6 +349,9 @@ */ #define CONFIG_SYS_PSSR_VAL 0x37 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings * @@ -480,6 +485,9 @@ #define CONFIG_SYS_MCIO0_VAL 0x00000000 #define CONFIG_SYS_MCIO1_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* #define CSB226_USER_LED0 0x00000008 #define CSB226_USER_LED1 0x00000010 diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 3a99ec25c4..62f9691983 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -43,7 +43,7 @@ #define CONFIG_MMC #define BOARD_LATE_INIT 1 #define CONFIG_DOS_PARTITION - +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ @@ -202,6 +202,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -212,6 +215,9 @@ #define CONFIG_SYS_MDREFR_VAL 0x00018018 #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 1062765f03..9e48857308 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -349,32 +349,32 @@ /* List of I2C addresses to be verified by POST */ #ifdef CONFIG_USE_FRAM -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + } #else /* Use EEPROM - which show up on 8 consequtive addresses */ -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR+0, \ - CONFIG_SYS_I2C_EEPROM_ADDR+1, \ - CONFIG_SYS_I2C_EEPROM_ADDR+2, \ - CONFIG_SYS_I2C_EEPROM_ADDR+3, \ - CONFIG_SYS_I2C_EEPROM_ADDR+4, \ - CONFIG_SYS_I2C_EEPROM_ADDR+5, \ - CONFIG_SYS_I2C_EEPROM_ADDR+6, \ - CONFIG_SYS_I2C_EEPROM_ADDR+7, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR+0, \ + CONFIG_SYS_I2C_EEPROM_ADDR+1, \ + CONFIG_SYS_I2C_EEPROM_ADDR+2, \ + CONFIG_SYS_I2C_EEPROM_ADDR+3, \ + CONFIG_SYS_I2C_EEPROM_ADDR+4, \ + CONFIG_SYS_I2C_EEPROM_ADDR+5, \ + CONFIG_SYS_I2C_EEPROM_ADDR+6, \ + CONFIG_SYS_I2C_EEPROM_ADDR+7, \ + } #endif /* CONFIG_USE_FRAM */ /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index a4e92cce3b..63e22d400c 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -306,14 +306,13 @@ #define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ #define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */ -#define I2C_ADDR_LIST { \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_EEPROM_CPU_ADDR, \ - CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_ADDR, \ - CONFIG_SYS_I2C_DSPIC_2_ADDR, \ - CONFIG_SYS_I2C_DSPIC_KEYB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_IO_ADDR } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\ + CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ + CONFIG_SYS_I2C_DSPIC_ADDR, \ + CONFIG_SYS_I2C_DSPIC_2_ADDR, \ + CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\ + CONFIG_SYS_I2C_DSPIC_IO_ADDR } /* * Pass open firmware flat tree diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 926728b15f..a2310a97ba 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -34,6 +34,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ "if mmcinfo && fatload mmc 0 0xa0000000 uboot.script ; then " \ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index fe87648ac6..40ab0bf2c0 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -36,6 +36,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_TEXT_BASE 0x0 #define CONFIG_BOOTCOMMAND \ "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \ diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h index 3b6e60afe9..b366f381b1 100644 --- a/include/configs/pleb2.h +++ b/include/configs/pleb2.h @@ -39,6 +39,7 @@ #undef CONFIG_LCD #undef CONFIG_MMC #define BOARD_LATE_INIT 1 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -155,15 +156,9 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ @@ -213,9 +208,9 @@ #define CONFIG_SYS_GAFR2_U_VAL 0x00000000 #define CONFIG_SYS_PSSR_VAL 0x20 -#define CONFIG_SYS_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000141 /* 100 MHz memory, 200 MHz CPU */ +#define CONFIG_SYS_CKEN 0x00000060 /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* * Memory settings @@ -231,6 +226,9 @@ /* bits set in lowlevel_init.S */ #define CONFIG_SYS_MDMRS_VAL 0x00000000 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 4581674ed3..b4327c621c 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -43,6 +43,7 @@ */ #undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ #undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* * define the following to enable debug blinks. A debug blink function @@ -271,7 +272,7 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 1 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ @@ -317,6 +318,9 @@ #define CONFIG_SYS_PSSR_VAL 0x20 +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 +#define CONFIG_SYS_CKEN 0x0 + /* * Memory settings */ @@ -326,6 +330,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x090009C9 #define CONFIG_SYS_MDREFR_VAL 0x0085C017 #define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 2c18e2f7fd..6627f99ce3 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -62,8 +62,10 @@ /* MEMORY */ #if defined(CONFIG_SH_32BIT) -#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000) -#define SH7785LCR_SDRAM_BASE (0x88000000) +/* 0x40000000 - 0x47FFFFFF does not use */ +#define CONFIG_SH_SDRAM_OFFSET (0x8000000) +#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET) +#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET) #define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024) #define SH7785LCR_FLASH_BASE_1 (0xa0000000) #define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) diff --git a/include/configs/spieval.h b/include/configs/spieval.h index b5ac1689b8..880c8a3057 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -271,10 +271,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 474349537b..ac3566cad1 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -44,6 +44,7 @@ #define CONFIG_MMC 1 #define BOARD_LATE_INIT 1 +#define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a2ecbe50d6..d2d9565247 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -211,4 +211,18 @@ #define CONFIG_SYS_NO_FLASH +/* + * Framebuffer and LCD + */ +#define CONFIG_PREBOOT +#define CONFIG_LCD +#define CONFIG_VIDEO_MX5 +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP + #endif /* __CONFIG_H */ diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index c9d9c69cda..3107014922 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -27,6 +27,7 @@ */ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_VPAC270 1 /* Voipac PXA270 board */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* * Environment settings diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h deleted file mode 100644 index a961a27922..0000000000 --- a/include/configs/wepep250.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Written by Peter Figuli <peposh@etc.sk>, 2003. - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PXA250 1 /* this is an PXA250 CPU */ -#define CONFIG_WEPEP250 1 /* config for wepep250 board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -/* - * Select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_BTUART 1 /* BTUART is default on WEP dev board */ -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_SOURCE - - -/* - * Boot options. Setting delay to -1 stops autostart count down. - * NOTE: Sending parameters to kernel depends on kernel version and - * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept - * parameters at all! Do not get confused by them so. - */ -#define CONFIG_BOOTDELAY -1 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8" -#define CONFIG_BOOTCOMMAND "bootm 40000" - - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "WEP> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#undef CONFIG_INITRD_TAG /* do not send initrd params */ -#undef CONFIG_VFD /* do not send framebuffer setup */ - - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - -/* - * SDRAM Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define WEP_SDRAM_1 0xa0000000 /* SDRAM bank #1 */ -#define WEP_SDRAM_1_SIZE 0x02000000 /* 32 MB ( 2 chip ) */ -#define WEP_SDRAM_2 0xa2000000 /* SDRAM bank #2 */ -#define WEP_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define WEP_SDRAM_3 0xa8000000 /* SDRAM bank #3 */ -#define WEP_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */ -#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x02000000 - -/* Uncomment used SDRAM chip */ -#define WEP_SDRAM_K4S281633 -/*#define WEP_SDRAM_K4S561633*/ - - -/* - * Configuration for FLASH memory - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ -#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */ -#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */ -#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/ -#define WEP_FLASH_SECT_SIZE 0x0040000 /* size of erase sector */ -#define WEP_FLASH_BASE 0x0000000 /* location of flash memory */ -#define WEP_FLASH_UNLOCK 1 /* perform hw unlock first */ - - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE WEP_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x2000 - -#define PHYS_SDRAM_1 WEP_SDRAM_1 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -#undef CONFIG_ENV_OVERWRITE /* env is not writable now */ - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x40000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 67d4106d6f..18b68fafae 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -42,6 +42,7 @@ */ #define CONFIG_PXA250 1 /* This is an PXA255 CPU */ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ +#define CONFIG_SYS_TEXT_BASE 0x0 #define BOARD_LATE_INIT 1 @@ -437,8 +438,9 @@ */ #define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CKEN_VAL 0x00000080 /* */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CKEN 0x00000080 /* */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 /* @@ -562,6 +564,9 @@ */ #define CONFIG_SYS_MDMRS_VAL 0x00320032 +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 + /* * PCMCIA and CF Interfaces */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 2ff9a2813a..ea52454aa6 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -35,6 +35,7 @@ #define CONFIG_PXA250 1 /* This is an PXA250 CPU */ #define CONFIG_XM250 1 /* on a MicroSys XM250 Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_SYS_TEXT_BASE 0x0 /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_NO_DCACHE @@ -322,9 +323,9 @@ * Clocks, power control and interrupts */ #define CONFIG_SYS_PSSR_VAL 0x00000030 -#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ -#define CONFIG_SYS_CKEN_VAL 0x000141ec /* FFUART and STUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ +#define CONFIG_SYS_CCCR 0x00000161 /* 100 MHz memory, 400 MHz CPU, 400 Turbo */ +#define CONFIG_SYS_CKEN 0x000141ec /* FFUART and STUART enabled */ +#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */ /* FIXME * @@ -343,6 +344,8 @@ #define CONFIG_SYS_MDCNFG_VAL 0x000009c9 #define CONFIG_SYS_MDMRS_VAL 0x00220022 #define CONFIG_SYS_MDREFR_VAL 0x000da018 /* Initial setting, individual bits set in lowlevel_init.S */ +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00000000 /* * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init) diff --git a/include/configs/XPEDITE1000.h b/include/configs/xpedite1000.h index 5605849774..d0f9363533 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/xpedite1000.h @@ -33,6 +33,7 @@ /* High Level Configuration Options */ #define CONFIG_XPEDITE1000 1 #define CONFIG_SYS_BOARD_NAME "XPedite1000" +#define CONFIG_SYS_FORM_PMC 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ @@ -341,8 +342,8 @@ extern void out32(unsigned int, unsigned long); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite1000\0" \ - "fdtfile=/home/user/xpedite1000.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5170.h b/include/configs/xpedite517x.h index 1851997916..8df9edd0ed 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/xpedite517x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5170 board configuration file + * xpedite517x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -34,6 +34,7 @@ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ #define CONFIG_SYS_BOARD_NAME "XPedite5170" +#define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ @@ -107,6 +108,21 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY |\ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ + CONFIG_SYS_I2C_DS4510_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA9553_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_PEX8518_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR} +/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */ +#define I2C_ADDR_IGNORE_LIST {0x50} /* * Memory map @@ -258,6 +274,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_DS1621_ADDR 0x48 #define CONFIG_DTT_DS1621 #define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 @@ -281,6 +298,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e #define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f #define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 +#define CONFIG_SYS_I2C_PCA9553_ADDR 0x62 /* * PU = pulled high, PD = pulled low @@ -324,18 +342,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * Memory space is mapped 1-1, but I/O space must start from 0. */ /* PCIE1 - PEX8518 */ -#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ /* PCIE2 - VPX P1 */ -#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ @@ -545,6 +563,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SNTP @@ -725,8 +744,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5170\0" \ - "fdtfile=/home/user/xpedite5170.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5200.h b/include/configs/xpedite520x.h index d0e9492b4e..2f313371c5 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/xpedite520x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5200 board configuration file + * xpedite520x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -36,6 +36,7 @@ #define CONFIG_MPC8548 1 #define CONFIG_XPEDITE5200 1 #define CONFIG_SYS_BOARD_NAME "XPedite5200" +#define CONFIG_SYS_FORM_PMC_XMC 1 #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #ifndef CONFIG_SYS_TEXT_BASE @@ -92,6 +93,13 @@ #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_MAX1237_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_RTC_ADDR} /* * Memory map @@ -250,7 +258,7 @@ #define CONFIG_SYS_PCA953X_BRD_CFG2 0x04 #define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10 -#define CONFIG_SYS_PCA953X_FLASH_WP 0x20 +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 #define CONFIG_SYS_PCA953X_MONARCH 0x40 #define CONFIG_SYS_PCA953X_EREADY 0x80 @@ -264,14 +272,17 @@ #define CONFIG_SYS_PCA953X_P14_IO6 0x40 #define CONFIG_SYS_PCA953X_P14_IO7 0x80 +/* 12-bit ADC used to measure CPU diode */ +#define CONFIG_SYS_I2C_MAX1237_ADDR 0x34 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS #define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 #define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */ @@ -339,6 +350,7 @@ #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_REGINFO @@ -521,8 +533,8 @@ "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5200\0" \ - "fdtfile=/home/user/xpedite5200.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/XPEDITE5370.h b/include/configs/xpedite537x.h index 629dc0d89c..e7de13a7cc 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/xpedite537x.h @@ -22,7 +22,7 @@ */ /* - * xpedite5370 board configuration file + * xpedite537x board configuration file */ #ifndef __CONFIG_H #define __CONFIG_H @@ -36,6 +36,7 @@ #define CONFIG_MPC8572 1 #define CONFIG_XPEDITE5370 1 #define CONFIG_SYS_BOARD_NAME "XPedite5370" +#define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ #ifndef CONFIG_SYS_TEXT_BASE @@ -110,6 +111,20 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_DS1621_ADDR, \ + CONFIG_SYS_I2C_DS4510_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR1, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_PEX8518_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR} +/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */ +#define I2C_ADDR_IGNORE_LIST {0x50} /* * Memory map @@ -265,6 +280,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_I2C_DS1621_ADDR 0x48 #define CONFIG_DTT_DS1621 #define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM90_ADDR 0x4c /* I2C EEPROM - AT24C128B */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 @@ -334,18 +350,18 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); * Memory space is mapped 1-1, but I/O space must start from 0. */ /* PCIE1 - VPX P1 */ -#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ -#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ /* PCIE2 - PEX8518 */ -#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 #define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ @@ -396,6 +412,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO #define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP @@ -578,8 +595,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ - "osfile=/home/user/uImage-XPedite5370\0" \ - "fdtfile=/home/user/xpedite5370.dtb\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h new file mode 100644 index 0000000000..a849cf9363 --- /dev/null +++ b/include/configs/xpedite550x.h @@ -0,0 +1,607 @@ +/* + * Copyright 2010 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * xpedite550x board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ +#define CONFIG_P2020 1 +#define CONFIG_XPEDITE550X 1 +#define CONFIG_SYS_BOARD_NAME "XPedite5500" +#define CONFIG_SYS_FORM_PMC_XMC 1 +#define CONFIG_PRPMC_PCI_ALIAS "pci0" /* Processor PMC interface on pci0 */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfff80000 +#endif + +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 (PEX8112 or XMC) */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_FSL_ELBC 1 + +/* + * Multicore config + */ +#define CONFIG_MP +#define CONFIG_BPTR_VIRT_ADDR 0xee000000 /* virt boot page address */ +#define CONFIG_MPC8xxx_DISABLE_BPTR /* Don't leave BPTR enabled */ + +/* + * DDR config + */ +#define CONFIG_FSL_DDR3 +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS1 0x54 +#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 2 +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +extern unsigned long get_board_ddr_clk(unsigned long dummy); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_ENABLE_36BIT_PHYS 1 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_I2C) +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_LM75_ADDR, \ + CONFIG_SYS_I2C_LM90_ADDR, \ + CONFIG_SYS_I2C_PCA953X_ADDR0, \ + CONFIG_SYS_I2C_PCA953X_ADDR2, \ + CONFIG_SYS_I2C_PCA953X_ADDR3, \ + CONFIG_SYS_I2C_RTC_ADDR} + +/* + * Memory map + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable + * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable + * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable + * 0xee00_0000 0xee00_ffff Boot page translation 4K non-cacheable + * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable + * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable + * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable + * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable + */ + +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_3) + +/* + * NAND flash configuration + */ +#define CONFIG_SYS_NAND_BASE 0xef800000 +#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ + CONFIG_SYS_NAND_BASE2} +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ +#define CONFIG_NAND_FSL_ELBC + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 +#define CONFIG_SYS_FLASH_BASE2 0xf0000000 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \ + {0xf7f40000, 0xc0000} } +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +/* + * Chip select configuration + */ +/* NOR Flash 0 on CS0 */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | \ + OR_GPCM_CSNT | \ + OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_8 | \ + OR_GPCM_TRLX | \ + OR_GPCM_EHTR | \ + OR_GPCM_EAD) + +/* NOR Flash 1 on CS1 */ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 | \ + BR_PS_16 | \ + BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM + +/* NAND flash on CS2 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE | \ + (2<<BR_DECC_SHIFT) | \ + BR_PS_8 | \ + BR_MS_FCM | \ + BR_V) + +/* NAND flash on CS2 */ +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB | \ + OR_FCM_PGS | \ + OR_FCM_CSCT | \ + OR_FCM_CST | \ + OR_FCM_CHT | \ + OR_FCM_SCY_1 | \ + OR_FCM_TRLX | \ + OR_FCM_EHTR) + +/* NAND flash on CS3 */ +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 | \ + (2<<BR_DECC_SHIFT) | \ + BR_PS_8 | \ + BR_MS_FCM | \ + BR_V) +#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM + +/* + * Use L1 as initial stack + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 +#define CONFIG_SYS_INIT_RAM_END 0x00004000 + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_BAUDRATE 115200 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 +#define CONFIG_FDT_FIXUP_PCI_IRQ 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_I2C_MULTI_BUS + +/* I2C DS7505 temperature sensor */ +#define CONFIG_DTT_LM75 +#define CONFIG_DTT_SENSORS { 0 } +#define CONFIG_SYS_I2C_LM75_ADDR 0x48 + +/* I2C ADT7461 temperature sensor */ +#define CONFIG_SYS_I2C_LM90_ADDR 0x4C + +/* I2C EEPROM - AT24C128B */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* GPIO */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 +#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c +#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e +#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f +#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 + +/* + * GPIO pin definitions, PU = pulled high, PD = pulled low + */ +/* PCA9557 @ 0x18*/ +#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */ +#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */ +#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Write protection (0: disabled, 1: enabled) */ + +/* PCA9557 @ 0x1e*/ +#define CONFIG_SYS_PCA953X_XMC_GA0 0x01 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_GA1 0x02 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_GA2 0x04 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_WAKE 0x10 /* PU; */ +#define CONFIG_SYS_PCA953X_XMC_BIST 0x20 /* Enable XMC BIST */ +#define CONFIG_SYS_PCA953X_PMC_EREADY 0x40 /* PU; PMC PCI eready */ +#define CONFIG_SYS_PCA953X_PMC_MONARCH 0x80 /* PMC monarch mode enable */ + +/* PCA9557 @ 0x1f */ +#define CONFIG_SYS_PCA953X_MC_GPIO0 0x01 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO1 0x02 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO2 0x04 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO3 0x08 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO4 0x10 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO5 0x20 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO6 0x40 /* PU; */ +#define CONFIG_SYS_PCA953X_MC_GPIO7 0x80 /* PU; */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1 - PEX8112 or XMC, depending on build option */ +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ + + +/* + * Networking options + */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_TSEC_TBI +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_ETHPRIME "eTSEC2" + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define CONFIG_HAS_ETH0 + +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_PHY_ADDR 2 +#define TSEC2_PHYIDX 0 +#define CONFIG_HAS_ETH1 + +#define CONFIG_TSEC3 1 +#define CONFIG_TSEC3_NAME "eTSEC3" +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_PHY_ADDR 3 +#define TSEC3_PHYIDX 0 +#define CONFIG_HAS_ETH2 + +/* + * USB + */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_DOS_PARTITION + +/* + * Command configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SNTP +#define CONFIG_CMD_USB + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) + +/* + * Flash memory map: + * fff80000 - ffffffff Pri U-Boot (512 KB) + * fff40000 - fff7ffff Pri U-Boot Environment (256 KB) + * fff00000 - fff3ffff Pri FDT (256KB) + * fef00000 - ffefffff Pri OS image (16MB) + * f8000000 - feefffff Pri OS Use/Filesystem (111MB) + * + * f7f80000 - f7ffffff Sec U-Boot (512 KB) + * f7f40000 - f7f7ffff Sec U-Boot Environment (256 KB) + * f7f00000 - f7f3ffff Sec FDT (256KB) + * f6f00000 - f7efffff Sec OS image (16MB) + * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) + */ +#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff80000) +#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f80000) +#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7f00000) +#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000) +#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000) + +#define CONFIG_PROG_UBOOT1 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_UBOOT2 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS1 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS2 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT1 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT2 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/board.uImage\0" \ + "fdtfile=/home/user/board.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ + "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ + "prog_os1="CONFIG_PROG_OS1"\0" \ + "prog_os2="CONFIG_PROG_OS2"\0" \ + "prog_fdt1="CONFIG_PROG_FDT1"\0" \ + "prog_fdt2="CONFIG_PROG_FDT2"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash1=run set_bootargs; " \ + "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ + "bootcmd_flash2=run set_bootargs; " \ + "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ + "bootcmd=run bootcmd_flash1\0" +#endif /* __CONFIG_H */ diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h deleted file mode 100644 index 9606b5316b..0000000000 --- a/include/configs/xsengine.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_XSENGINE 1 -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define BOARD_LATE_INIT 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_NO_DCACHE - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=xsengine-0" -#define MTDPARTS_DEFAULT "mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)" -*/ - -/* Environment settings */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) /* Addr of Environment Sector (after monitor)*/ -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Size of the Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* Hardware drivers */ -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 -#define CONFIG_SMC_USE_32_BIT 1 - -/* select serial console configuration */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_JFFS2 - - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.1.50 -#define CONFIG_SERVERIP 192.168.1.2 -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS1,115200" -#define CONFIG_CMDLINE_TAG - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */ -#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */ - -#ifdef CONFIG_MMC -#define CONFIG_PXA_MMC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* Stack sizes - The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* GP set register */ -#define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */ -#define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP clear register */ -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000000 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 - -/* GP direction register */ -#define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */ -#define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */ -#define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */ - -/* GP rising edge detect register */ -#define CONFIG_SYS_GRER0_VAL 0x00000000 -#define CONFIG_SYS_GRER1_VAL 0x00000000 -#define CONFIG_SYS_GRER2_VAL 0x00000000 - -/* GP falling edge detect register */ -#define CONFIG_SYS_GFER0_VAL 0x00000000 -#define CONFIG_SYS_GFER1_VAL 0x00000000 -#define CONFIG_SYS_GFER2_VAL 0x00000000 - -/* GP alternate function register */ -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */ -#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */ -#define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */ -#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */ -#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */ -#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 - -#define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */ -#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */ -#define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */ -#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */ - -/* Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x25F425F0 - -/* MDCNFG: SDRAM Configuration Register */ -#define CONFIG_SYS_MDCNFG_VAL 0x000009C9 - -/* MDREFR: SDRAM Refresh Control Register */ -#define CONFIG_SYS_MDREFR_VAL 0x00018018 - -/* MDMRS: Mode Register Set Configuration Register */ -#define CONFIG_SYS_MDMRS_VAL 0x00220022 - -#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index ce65d1f1c6..48537e3ccb 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -27,6 +27,7 @@ */ #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ +#define CONFIG_SYS_TEXT_BASE 0x0 #undef BOARD_LATE_INIT #undef CONFIG_SKIP_RELOCATE_UBOOT diff --git a/include/led-display.h b/include/led-display.h index 41c3744345..eaa0f40640 100644 --- a/include/led-display.h +++ b/include/led-display.h @@ -29,7 +29,6 @@ /* Display Commands */ #define DISPLAY_CLEAR 0x1 /* Clear the display */ #define DISPLAY_HOME 0x2 /* Set cursor at home position */ -#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */ void display_set(int cmd); int display_putc(char c); diff --git a/include/linux/fb.h b/include/linux/fb.h new file mode 100644 index 0000000000..f4ac4bf90e --- /dev/null +++ b/include/linux/fb.h @@ -0,0 +1,616 @@ +#ifndef _LINUX_FB_H +#define _LINUX_FB_H + +#include <linux/types.h> + +/* Definitions of frame buffers */ + +#define FB_MAX 32 /* sufficient for now */ + +#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ + +#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ +#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ +#define FB_VISUAL_TRUECOLOR 2 /* True color */ +#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ +#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ +#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ + +#define FB_ACCEL_NONE 0 /* no hardware accelerator */ + +struct fb_fix_screeninfo { + char id[16]; /* identification string eg "TT Builtin" */ + unsigned long smem_start; /* Start of frame buffer mem */ + /* (physical address) */ + __u32 smem_len; /* Length of frame buffer mem */ + __u32 type; /* see FB_TYPE_* */ + __u32 type_aux; /* Interleave for interleaved Planes */ + __u32 visual; /* see FB_VISUAL_* */ + __u16 xpanstep; /* zero if no hardware panning */ + __u16 ypanstep; /* zero if no hardware panning */ + __u16 ywrapstep; /* zero if no hardware ywrap */ + __u32 line_length; /* length of a line in bytes */ + unsigned long mmio_start; /* Start of Memory Mapped I/O */ + /* (physical address) */ + __u32 mmio_len; /* Length of Memory Mapped I/O */ + __u32 accel; /* Indicate to driver which */ + /* specific chip/card we have */ + __u16 reserved[3]; /* Reserved for future compatibility */ +}; + +/* + * Interpretation of offset for color fields: All offsets are from the right, + * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you + * can use the offset as right argument to <<). A pixel afterwards is a bit + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). + */ +struct fb_bitfield { + __u32 offset; /* beginning of bitfield */ + __u32 length; /* length of bitfield */ + __u32 msb_right; + +}; + +#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ +#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ + +#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ +#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ +#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ +#define FB_ACTIVATE_MASK 15 + /* values */ +#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ +#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ +#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ +#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ +#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ + +#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ +#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ +#define FB_SYNC_EXT 4 /* external sync */ +#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ +#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ + /* vtotal = 144d/288n/576i => PAL */ + /* vtotal = 121d/242n/484i => NTSC */ +#define FB_SYNC_ON_GREEN 32 /* sync on green */ + +#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ +#define FB_VMODE_INTERLACED 1 /* interlaced */ +#define FB_VMODE_DOUBLE 2 /* double scan */ +#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ +#define FB_VMODE_MASK 255 + +#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ +#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ +#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ + +/* + * Display rotation support + */ +#define FB_ROTATE_UR 0 +#define FB_ROTATE_CW 1 +#define FB_ROTATE_UD 2 +#define FB_ROTATE_CCW 3 + +#define PICOS2KHZ(a) (1000000000UL/(a)) +#define KHZ2PICOS(a) (1000000000UL/(a)) + +struct fb_var_screeninfo { + __u32 xres; /* visible resolution */ + __u32 yres; + __u32 xres_virtual; /* virtual resolution */ + __u32 yres_virtual; + __u32 xoffset; /* offset from virtual to visible */ + __u32 yoffset; /* resolution */ + + __u32 bits_per_pixel; /* guess what */ + __u32 grayscale; /* != 0 Graylevels instead of colors */ + + struct fb_bitfield red; /* bitfield in fb mem if true color, */ + struct fb_bitfield green; /* else only length is significant */ + struct fb_bitfield blue; + struct fb_bitfield transp; /* transparency */ + + __u32 nonstd; /* != 0 Non standard pixel format */ + + __u32 activate; /* see FB_ACTIVATE_* */ + + __u32 height; /* height of picture in mm */ + __u32 width; /* width of picture in mm */ + + __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ + + /* Timing: All values in pixclocks, except pixclock (of course) */ + __u32 pixclock; /* pixel clock in ps (pico seconds) */ + __u32 left_margin; /* time from sync to picture */ + __u32 right_margin; /* time from picture to sync */ + __u32 upper_margin; /* time from sync to picture */ + __u32 lower_margin; + __u32 hsync_len; /* length of horizontal sync */ + __u32 vsync_len; /* length of vertical sync */ + __u32 sync; /* see FB_SYNC_* */ + __u32 vmode; /* see FB_VMODE_* */ + __u32 rotate; /* angle we rotate counter clockwise */ + __u32 reserved[5]; /* Reserved for future compatibility */ +}; + +struct fb_cmap { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_con2fbmap { + __u32 console; + __u32 framebuffer; +}; + +/* VESA Blanking Levels */ +#define VESA_NO_BLANKING 0 +#define VESA_VSYNC_SUSPEND 1 +#define VESA_HSYNC_SUSPEND 2 +#define VESA_POWERDOWN 3 + + +enum { + /* screen: unblanked, hsync: on, vsync: on */ + FB_BLANK_UNBLANK = VESA_NO_BLANKING, + + /* screen: blanked, hsync: on, vsync: on */ + FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, + + /* screen: blanked, hsync: on, vsync: off */ + FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: on */ + FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, + + /* screen: blanked, hsync: off, vsync: off */ + FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 +}; + +#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ +#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ +#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ +#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ +#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ +#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ +#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ +#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ +#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ + +struct fb_vblank { + __u32 flags; /* FB_VBLANK flags */ + __u32 count; /* counter of retraces since boot */ + __u32 vcount; /* current scanline position */ + __u32 hcount; /* current scandot position */ + __u32 reserved[4]; /* reserved for future compatibility */ +}; + +/* Internal HW accel */ +#define ROP_COPY 0 +#define ROP_XOR 1 + +struct fb_copyarea { + __u32 dx; + __u32 dy; + __u32 width; + __u32 height; + __u32 sx; + __u32 sy; +}; + +struct fb_fillrect { + __u32 dx; /* screen-relative */ + __u32 dy; + __u32 width; + __u32 height; + __u32 color; + __u32 rop; +}; + +struct fb_image { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap cmap; /* color map info */ +}; + +/* + * hardware cursor control + */ + +#define FB_CUR_SETIMAGE 0x01 +#define FB_CUR_SETPOS 0x02 +#define FB_CUR_SETHOT 0x04 +#define FB_CUR_SETCMAP 0x08 +#define FB_CUR_SETSHAPE 0x10 +#define FB_CUR_SETSIZE 0x20 +#define FB_CUR_SETALL 0xFF + +struct fbcurpos { + __u16 x, y; +}; + +struct fb_cursor { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image image; /* Cursor image */ +}; + +#ifdef CONFIG_FB_BACKLIGHT +/* Settings for the generic backlight code */ +#define FB_BACKLIGHT_LEVELS 128 +#define FB_BACKLIGHT_MAX 0xFF +#endif + +#ifdef __KERNEL__ + +struct vm_area_struct; +struct fb_info; +struct device; +struct file; + +/* Definitions below are used in the parsed monitor specs */ +#define FB_DPMS_ACTIVE_OFF 1 +#define FB_DPMS_SUSPEND 2 +#define FB_DPMS_STANDBY 4 + +#define FB_DISP_DDI 1 +#define FB_DISP_ANA_700_300 2 +#define FB_DISP_ANA_714_286 4 +#define FB_DISP_ANA_1000_400 8 +#define FB_DISP_ANA_700_000 16 + +#define FB_DISP_MONO 32 +#define FB_DISP_RGB 64 +#define FB_DISP_MULTI 128 +#define FB_DISP_UNKNOWN 256 + +#define FB_SIGNAL_NONE 0 +#define FB_SIGNAL_BLANK_BLANK 1 +#define FB_SIGNAL_SEPARATE 2 +#define FB_SIGNAL_COMPOSITE 4 +#define FB_SIGNAL_SYNC_ON_GREEN 8 +#define FB_SIGNAL_SERRATION_ON 16 + +#define FB_MISC_PRIM_COLOR 1 +#define FB_MISC_1ST_DETAIL 2 /* First Detailed Timing is preferred */ +struct fb_chroma { + __u32 redx; /* in fraction of 1024 */ + __u32 greenx; + __u32 bluex; + __u32 whitex; + __u32 redy; + __u32 greeny; + __u32 bluey; + __u32 whitey; +}; + +struct fb_monspecs { + struct fb_chroma chroma; + struct fb_videomode *modedb; /* mode database */ + __u8 manufacturer[4]; /* Manufacturer */ + __u8 monitor[14]; /* Monitor String */ + __u8 serial_no[14]; /* Serial Number */ + __u8 ascii[14]; /* ? */ + __u32 modedb_len; /* mode database length */ + __u32 model; /* Monitor Model */ + __u32 serial; /* Serial Number - Integer */ + __u32 year; /* Year manufactured */ + __u32 week; /* Week Manufactured */ + __u32 hfmin; /* hfreq lower limit (Hz) */ + __u32 hfmax; /* hfreq upper limit (Hz) */ + __u32 dclkmin; /* pixelclock lower limit (Hz) */ + __u32 dclkmax; /* pixelclock upper limit (Hz) */ + __u16 input; /* display type - see FB_DISP_* */ + __u16 dpms; /* DPMS support - see FB_DPMS_ */ + __u16 signal; /* Signal Type - see FB_SIGNAL_* */ + __u16 vfmin; /* vfreq lower limit (Hz) */ + __u16 vfmax; /* vfreq upper limit (Hz) */ + __u16 gamma; /* Gamma - in fractions of 100 */ + __u16 gtf : 1; /* supports GTF */ + __u16 misc; /* Misc flags - see FB_MISC_* */ + __u8 version; /* EDID version... */ + __u8 revision; /* ...and revision */ + __u8 max_x; /* Maximum horizontal size (cm) */ + __u8 max_y; /* Maximum vertical size (cm) */ +}; + +struct fb_cmap_user { + __u32 start; /* First entry */ + __u32 len; /* Number of entries */ + __u16 *red; /* Red values */ + __u16 *green; + __u16 *blue; + __u16 *transp; /* transparency, can be NULL */ +}; + +struct fb_image_user { + __u32 dx; /* Where to place image */ + __u32 dy; + __u32 width; /* Size of image */ + __u32 height; + __u32 fg_color; /* Only used when a mono bitmap */ + __u32 bg_color; + __u8 depth; /* Depth of the image */ + const char *data; /* Pointer to image data */ + struct fb_cmap_user cmap; /* color map info */ +}; + +struct fb_cursor_user { + __u16 set; /* what to set */ + __u16 enable; /* cursor on/off */ + __u16 rop; /* bitop operation */ + const char *mask; /* cursor mask bits */ + struct fbcurpos hot; /* cursor hot spot */ + struct fb_image_user image; /* Cursor image */ +}; + +/* + * Register/unregister for framebuffer events + */ + +/* The resolution of the passed in fb_info about to change */ +#define FB_EVENT_MODE_CHANGE 0x01 +/* The display on this fb_info is beeing suspended, no access to the + * framebuffer is allowed any more after that call returns + */ +#define FB_EVENT_SUSPEND 0x02 +/* The display on this fb_info was resumed, you can restore the display + * if you own it + */ +#define FB_EVENT_RESUME 0x03 +/* An entry from the modelist was removed */ +#define FB_EVENT_MODE_DELETE 0x04 +/* A driver registered itself */ +#define FB_EVENT_FB_REGISTERED 0x05 +/* A driver unregistered itself */ +#define FB_EVENT_FB_UNREGISTERED 0x06 +/* CONSOLE-SPECIFIC: get console to framebuffer mapping */ +#define FB_EVENT_GET_CONSOLE_MAP 0x07 +/* CONSOLE-SPECIFIC: set console to framebuffer mapping */ +#define FB_EVENT_SET_CONSOLE_MAP 0x08 +/* A hardware display blank change occured */ +#define FB_EVENT_BLANK 0x09 +/* Private modelist is to be replaced */ +#define FB_EVENT_NEW_MODELIST 0x0A +/* The resolution of the passed in fb_info about to change and + all vc's should be changed */ +#define FB_EVENT_MODE_CHANGE_ALL 0x0B +/* A software display blank change occured */ +#define FB_EVENT_CONBLANK 0x0C +/* Get drawing requirements */ +#define FB_EVENT_GET_REQ 0x0D +/* Unbind from the console if possible */ +#define FB_EVENT_FB_UNBIND 0x0E + +struct fb_event { + struct fb_info *info; + void *data; +}; + +struct fb_blit_caps { + u32 x; + u32 y; + u32 len; + u32 flags; +}; + +/* + * Pixmap structure definition + * + * The purpose of this structure is to translate data + * from the hardware independent format of fbdev to what + * format the hardware needs. + */ + +#define FB_PIXMAP_DEFAULT 1 /* used internally by fbcon */ +#define FB_PIXMAP_SYSTEM 2 /* memory is in system RAM */ +#define FB_PIXMAP_IO 4 /* memory is iomapped */ +#define FB_PIXMAP_SYNC 256 /* set if GPU can DMA */ + +struct fb_pixmap { + u8 *addr; /* pointer to memory */ + u32 size; /* size of buffer in bytes */ + u32 offset; /* current offset to buffer */ + u32 buf_align; /* byte alignment of each bitmap */ + u32 scan_align; /* alignment per scanline */ + u32 access_align; /* alignment per read/write (bits) */ + u32 flags; /* see FB_PIXMAP_* */ + u32 blit_x; /* supported bit block dimensions (1-32)*/ + u32 blit_y; /* Format: blit_x = 1 << (width - 1) */ + /* blit_y = 1 << (height - 1) */ + /* if 0, will be set to 0xffffffff (all)*/ + /* access methods */ + void (*writeio)(struct fb_info *info, void *dst, void *src, unsigned int size); + void (*readio) (struct fb_info *info, void *dst, void *src, unsigned int size); +}; + +#ifdef CONFIG_FB_DEFERRED_IO +struct fb_deferred_io { + /* delay between mkwrite and deferred handler */ + unsigned long delay; + struct mutex lock; /* mutex that protects the page list */ + struct list_head pagelist; /* list of touched pages */ + /* callback */ + void (*deferred_io)(struct fb_info *info, struct list_head *pagelist); +}; +#endif + +/* FBINFO_* = fb_info.flags bit flags */ +#define FBINFO_MODULE 0x0001 /* Low-level driver is a module */ +#define FBINFO_HWACCEL_DISABLED 0x0002 + /* When FBINFO_HWACCEL_DISABLED is set: + * Hardware acceleration is turned off. Software implementations + * of required functions (copyarea(), fillrect(), and imageblit()) + * takes over; acceleration engine should be in a quiescent state */ + +/* hints */ +#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */ +#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */ + +/* + * A driver may set this flag to indicate that it does want a set_par to be + * called every time when fbcon_switch is executed. The advantage is that with + * this flag set you can really be sure that set_par is always called before + * any of the functions dependant on the correct hardware state or altering + * that state, even if you are using some broken X releases. The disadvantage + * is that it introduces unwanted delays to every console switch if set_par + * is slow. It is a good idea to try this flag in the drivers initialization + * code whenever there is a bug report related to switching between X and the + * framebuffer console. + */ +#define FBINFO_MISC_ALWAYS_SETPAR 0x40000 + +/* + * Host and GPU endianness differ. + */ +#define FBINFO_FOREIGN_ENDIAN 0x100000 +/* + * Big endian math. This is the same flags as above, but with different + * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag + * and host endianness. Drivers should not use this flag. + */ +#define FBINFO_BE_MATH 0x100000 + +struct fb_info { + int node; + int flags; + struct fb_var_screeninfo var; /* Current var */ + struct fb_fix_screeninfo fix; /* Current fix */ + struct fb_monspecs monspecs; /* Current Monitor specs */ + struct fb_pixmap pixmap; /* Image hardware mapper */ + struct fb_pixmap sprite; /* Cursor hardware mapper */ + struct fb_cmap cmap; /* Current cmap */ + struct list_head modelist; /* mode list */ + struct fb_videomode *mode; /* current mode */ + + char *screen_base; /* Virtual address */ + unsigned long screen_size; /* Amount of ioremapped VRAM or 0 */ + void *pseudo_palette; /* Fake palette of 16 colors */ +#define FBINFO_STATE_RUNNING 0 +#define FBINFO_STATE_SUSPENDED 1 + u32 state; /* Hardware state i.e suspend */ + void *fbcon_par; /* fbcon use-only private area */ + /* From here on everything is device dependent */ + void *par; +}; + +#define FBINFO_DEFAULT 0 + +#define FBINFO_FLAG_MODULE FBINFO_MODULE +#define FBINFO_FLAG_DEFAULT FBINFO_DEFAULT + +// This will go away +#if defined(__sparc__) + +/* We map all of our framebuffers such that big-endian accesses + * are what we want, so the following is sufficient. + */ + +// This will go away +#define fb_readb sbus_readb +#define fb_readw sbus_readw +#define fb_readl sbus_readl +#define fb_readq sbus_readq +#define fb_writeb sbus_writeb +#define fb_writew sbus_writew +#define fb_writel sbus_writel +#define fb_writeq sbus_writeq +#define fb_memset sbus_memset_io + +#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__) + +#define fb_readb __raw_readb +#define fb_readw __raw_readw +#define fb_readl __raw_readl +#define fb_readq __raw_readq +#define fb_writeb __raw_writeb +#define fb_writew __raw_writew +#define fb_writel __raw_writel +#define fb_writeq __raw_writeq +#define fb_memset memset_io + +#else + +#define fb_readb(addr) (*(volatile u8 *) (addr)) +#define fb_readw(addr) (*(volatile u16 *) (addr)) +#define fb_readl(addr) (*(volatile u32 *) (addr)) +#define fb_readq(addr) (*(volatile u64 *) (addr)) +#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b)) +#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b)) +#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b)) +#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b)) +#define fb_memset memset + +#endif + +#define FB_LEFT_POS(p, bpp) (fb_be_math(p) ? (32 - (bpp)) : 0) +#define FB_SHIFT_HIGH(p, val, bits) (fb_be_math(p) ? (val) >> (bits) : \ + (val) << (bits)) +#define FB_SHIFT_LOW(p, val, bits) (fb_be_math(p) ? (val) << (bits) : \ + (val) >> (bits)) +/* drivers/video/fbmon.c */ +#define FB_MAXTIMINGS 0 +#define FB_VSYNCTIMINGS 1 +#define FB_HSYNCTIMINGS 2 +#define FB_DCLKTIMINGS 3 +#define FB_IGNOREMON 0x100 + +#define FB_MODE_IS_UNKNOWN 0 +#define FB_MODE_IS_DETAILED 1 +#define FB_MODE_IS_STANDARD 2 +#define FB_MODE_IS_VESA 4 +#define FB_MODE_IS_CALCULATED 8 +#define FB_MODE_IS_FIRST 16 +#define FB_MODE_IS_FROM_VAR 32 + + +/* drivers/video/fbcmap.c */ + +extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); +extern void fb_dealloc_cmap(struct fb_cmap *cmap); +extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); +extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); +extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info); +extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info); +extern const struct fb_cmap *fb_default_cmap(int len); +extern void fb_invert_cmaps(void); + +struct fb_videomode { + const char *name; /* optional */ + u32 refresh; /* optional */ + u32 xres; + u32 yres; + u32 pixclock; + u32 left_margin; + u32 right_margin; + u32 upper_margin; + u32 lower_margin; + u32 hsync_len; + u32 vsync_len; + u32 sync; + u32 vmode; + u32 flag; +}; + +#endif /* __KERNEL__ */ + +#endif /* _LINUX_FB_H */ diff --git a/include/post.h b/include/post.h index daa9047118..abe47da53b 100644 --- a/include/post.h +++ b/include/post.h @@ -60,6 +60,10 @@ #include <asm/immap_85xx.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr)) +#elif defined (CONFIG_MPC86xx) +#include <asm/immap_86xx.h> +#define _POST_WORD_ADDR (CONFIG_SYS_IMMR + offsetof(ccsr_pic_t, tfrr)) + #elif defined (CONFIG_4xx) #define _POST_WORD_ADDR \ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4) |
