diff options
Diffstat (limited to 'include')
118 files changed, 3111 insertions, 1348 deletions
diff --git a/include/_exports.h b/include/_exports.h index 594470328e..279017e87f 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -23,7 +23,9 @@ EXPORT_FUNC(dummy, void, free_hdlr, void) #endif EXPORT_FUNC(malloc, void *, malloc, size_t) +#ifndef CONFIG_SYS_MALLOC_SIMPLE EXPORT_FUNC(free, void, free, void *) +#endif EXPORT_FUNC(udelay, void, udelay, unsigned long) EXPORT_FUNC(get_timer, unsigned long, get_timer, unsigned long) EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list) diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a63a87a287..c918049386 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -45,7 +45,7 @@ typedef struct bd_info { || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) unsigned long bi_mbar_base; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) @@ -66,10 +66,15 @@ typedef struct bd_info { #if defined(CONFIG_MPC512X) unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */ #endif /* CONFIG_MPC512X */ -#if defined(CONFIG_MPC5xxx) +#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif +#if defined(CONFIG_EXTRA_CLOCK) + unsigned long bi_inpfreq; /* input Freq in MHz */ + unsigned long bi_vcofreq; /* vco Freq in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ +#endif #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ diff --git a/include/axp221.h b/include/axp221.h index a20e25c2f8..be6058e439 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -14,6 +14,9 @@ #define AXP223_RUNTIME_ADDR 0x2d /* Page 0 addresses */ +#define AXP221_POWER_STATUS 0x00 +#define AXP221_POWER_STATUS_VBUS_AVAIL (1 << 5) +#define AXP221_POWER_STATUS_VBUS_USABLE (1 << 4) #define AXP221_CHIP_ID 0x03 #define AXP221_OUTPUT_CTRL1 0x10 #define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0) @@ -59,6 +62,9 @@ /* Page 1 addresses */ #define AXP221_SID 0x20 +/* We support vbus detection */ +#define AXP_VBUS_DETECT + /* We support drivebus control */ #define AXP_DRIVEBUS @@ -77,5 +83,6 @@ int axp221_set_aldo3(unsigned int mvolt); int axp221_set_eldo(int eldo_num, unsigned int mvolt); int axp221_init(void); int axp221_get_sid(unsigned int *sid); +int axp_get_vbus(void); int axp_drivebus_enable(void); int axp_drivebus_disable(void); diff --git a/include/common.h b/include/common.h index 77c55c6f26..6df05b8bb1 100644 --- a/include/common.h +++ b/include/common.h @@ -553,7 +553,9 @@ static inline int cpumask_next(int cpu, unsigned int mask) iter++, cpu = cpumask_next(cpu, mask)) \ int cpu_numcores (void); +int cpu_num_dspcores(void); u32 cpu_mask (void); +u32 cpu_dsp_mask(void); int is_core_valid (unsigned int); int probecpu (void); int checkcpu (void); diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h index 9cb7a9a1fc..a9106f4f3b 100644 --- a/include/config_uncmd_spl.h +++ b/include/config_uncmd_spl.h @@ -20,5 +20,18 @@ #undef CONFIG_CMD_SNTP #undef CONFIG_CMD_TFTPPUT #undef CONFIG_CMD_TFTPSRV +#undef CONFIG_OF_CONTROL + +#ifndef CONFIG_SPL_DM +#undef CONFIG_DM_SERIAL +#undef CONFIG_DM_GPIO +#undef CONFIG_DM_I2C +#undef CONFIG_DM_SPI +#endif + +#undef CONFIG_DM_WARN +#undef CONFIG_DM_DEVICE_REMOVE +#undef CONFIG_DM_STDIO + #endif /* CONFIG_SPL_BUILD */ #endif /* __CONFIG_UNCMD_SPL_H__ */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 0f4b726f3a..734a77fb4f 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -22,6 +22,8 @@ #define CONFIG_M54451 /* define processor type */ #define CONFIG_M54451EVB /* M54451EVB board */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 7a55d3c619..2faf58156d 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -22,6 +22,8 @@ #define CONFIG_M54455 /* define processor type */ #define CONFIG_M54455EVB /* M54455EVB board */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index e88a6bd8d3..2f4549f270 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -22,11 +22,13 @@ #define CONFIG_M547x /* define processor type */ #define CONFIG_M5475 /* define processor type */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_HW_WATCHDOG +#undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index e4128062a9..9aa02f7c6c 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -22,11 +22,13 @@ #define CONFIG_M548x /* define processor type */ #define CONFIG_M5485 /* define processor type */ +#define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CONFIG_HW_WATCHDOG +#undef CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* Command line configuration */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index d47f1be685..52633181ad 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -220,7 +220,6 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h deleted file mode 100644 index 0d3cf369b6..0000000000 --- a/include/configs/a320evb.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * (C) Copyright 2009 Faraday Technology - * Po-Yu Chuang <ratbert@faraday-tech.com> - * - * Configuation settings for the Faraday A320 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/a320.h> - -/* - * mach-type definition - */ -#define MACH_TYPE_FARADAY 758 -#define CONFIG_MACH_TYPE MACH_TYPE_FARADAY - -/* - * Linux kernel tagged list - */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -/* - * CPU and Board Configuration Options - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Power Management Unit - */ -#define CONFIG_FTPMU010_POWER - -/* - * Timer - */ - -/* - * Real Time Clock - */ -#define CONFIG_RTC_FTRTC010 - -/* - * Serial console configuration - */ - -/* FTUART is a high speed NS 16C550A compatible UART */ -#define CONFIG_BAUDRATE 38400 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_COM1 0x98200000 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_CLK 18432000 - -/* - * Ethernet - */ -#define CONFIG_FTMAC100 - -#define CONFIG_BOOTDELAY 3 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * SDRAM controller configuration - */ -#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ - FTSDMC020_TP0_TRP(1) | \ - FTSDMC020_TP0_TRCD(1) | \ - FTSDMC020_TP0_TRF(3) | \ - FTSDMC020_TP0_TWR(1) | \ - FTSDMC020_TP0_TCL(2)) - -#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ - FTSDMC020_TP1_INI_REFT(8) | \ - FTSDMC020_TP1_REF_INTV(0x180)) - -#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ - FTSDMC020_BANK_DDW_X16 | \ - FTSDMC020_BANK_DSZ_256M | \ - FTSDMC020_BANK_MBW_32 | \ - FTSDMC020_BANK_SIZE_64M) - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Load address and memory test area should agree with - * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000) - -/* memtest works on 63 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000) - -#define CONFIG_SYS_TEXT_BASE 0 - -/* - * Static memory controller configuration - */ - -#define CONFIG_FTSMC020 -#include <faraday/ftsmc020.h> - -#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ - FTSMC020_BANK_SIZE_1M | \ - FTSMC020_BANK_MBW_8) - -#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ - FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ - FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ - FTSMC020_BANK_SIZE_32M | \ - FTSMC020_BANK_MBW_32) - -#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ - FTSMC020_TPR_CTW(3) | \ - FTSMC020_TPR_ATI(0xf) | \ - FTSMC020_TPR_AT2(3) | \ - FTSMC020_TPR_WTC(3) | \ - FTSMC020_TPR_AHT(3) | \ - FTSMC020_TPR_TRNA(0xf)) - -#define CONFIG_SYS_FTSMC020_CONFIGS { \ - { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ - { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ -} - -/* - * FLASH and environment organization - */ - -/* use CFI framework */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -/* support JEDEC */ -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx8 - -#define PHYS_FLASH_1 0x00000000 -#define PHYS_FLASH_2 0x00400000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 - -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 - -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#undef CONFIG_SYS_FLASH_EMPTY_INFO - -/* environments */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) -#define CONFIG_ENV_SIZE 0x20000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/alt.h b/include/configs/alt.h index 58eac31358..e9ffa4866b 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -38,8 +38,6 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE -#define CONFIG_CONS_SCIF2 -#define CONFIG_SCIF_USE_EXT_CLK /* FLASH */ #define CONFIG_SPI @@ -70,7 +68,6 @@ #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ #define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) #define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) -#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ #define CONFIG_SYS_TMU_CLK_DIV 4 @@ -114,4 +111,7 @@ /* SCIF2 */ #define CONFIG_SMSTP7_ENA 0x00080000 +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 97500000 + #endif /* __ALT_H */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 09ee10c059..290a6a3e06 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -297,7 +297,6 @@ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 190ef0e71b..3de5079962 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -306,7 +306,6 @@ #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h new file mode 100644 index 0000000000..2a785b3fc3 --- /dev/null +++ b/include/configs/amcore.h @@ -0,0 +1,140 @@ +/* + * Sysam AMCORE board configuration + * + * (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AMCORE_CONFIG_H +#define __AMCORE_CONFIG_H + +#define CONFIG_AMCORE +#define CONFIG_HOSTNAME AMCORE + +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_MCF530x +#define CONFIG_M5307 + +#define CONFIG_MCFTMR +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BOOTCOMMAND "bootm ffc20000" + +#include <config_cmd_default.h> +#undef CONFIG_CMD_AES +#undef CONFIG_CMD_BOOTD +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_XIMG +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_TIMER +#define CONFIG_CMD_DIAG + +#define CONFIG_SYS_PROMPT "amcore $ " +/* undef to save memory */ +#undef CONFIG_SYS_LONGHELP + +#if defined(CONFIG_CMD_KGDB) +/* Console I/O buff. size */ +#define CONFIG_SYS_CBSIZE 1024 +#else +#define CONFIG_SYS_CBSIZE 256 +#endif +/* Print buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot argument buffer size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* no console @ startup */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ + +#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */ + +#define CONFIG_SYS_MEMTEST_START 0x0 +#define CONFIG_SYS_MEMTEST_END 0x1000000 + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_CLK 45000000 +#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2) +/* Register Base Addrs */ +#define CONFIG_SYS_MBAR 0x10000000 +/* Definitions for initial stack pointer and data area (in DPRAM) */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +/* size of internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE 0x1000000 +#define CONFIG_SYS_FLASH_BASE 0xffc00000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +/* amcore design has flash data bytes wired swapped */ +#define CONFIG_SYS_WRITE_SWAPPED_DATA +/* reserve 128-4KB */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024) +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 + +/* memory map space for linux boot data */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* + * Cache Configuration + * + * Special 8K version 3 core cache. + * This is a single unified instruction/data cache. + * sdram - single region - no masks + */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \ + CF_ACR_EN) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \ + CF_CACR_EC) + +/* CS0 - AMD Flash, address 0xffc00000 */ +#define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16) +/* 4MB, AA=0,V=1 C/I BIT for errata */ +#define CONFIG_SYS_CS0_MASK 0x003f0001 +/* WS=10, AA=1, PS=16bit (10) */ +#define CONFIG_SYS_CS0_CTRL 0x1980 +/* CS1 - DM9000 Ethernet Controller, address 0x30000000 */ +#define CONFIG_SYS_CS1_BASE 0x3000 +#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CONFIG_SYS_CS1_CTRL 0x0100 + +#endif /* __AMCORE_CONFIG_H */ + diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index 727b14a6c2..47760ef7ba 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -11,6 +11,11 @@ #define __CONFIG_ASPENITE_H /* + * Generic board support + */ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-Aspenite DB" diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 35eae76930..eaed7eaa20 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -16,6 +16,10 @@ #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100MKII +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R + /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 2f5a6609b8..848a15832f 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -13,7 +13,7 @@ * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_BALLOON3 1 /* Balloon3 board */ +#define CONFIG_BALLOON3 1 /* Balloon3 board */ /* * Environment settings @@ -84,18 +84,17 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* * DRAM Map */ -#define CONFIG_NR_DRAM_BANKS 3 /* 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */ #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */ #define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */ #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ @@ -135,7 +134,7 @@ #define CONFIG_ENV_IS_IN_FLASH #else #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_SYS_MONITOR_BASE 0x000000 @@ -191,7 +190,6 @@ #define CONFIG_SYS_MDMRS_VAL 0x00220022 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x00000000 -#define CONFIG_SYS_MEM_BUF_IMP 0x0f /* * PCMCIA and CF Interfaces diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h new file mode 100644 index 0000000000..490c53e92f --- /dev/null +++ b/include/configs/bav335x.h @@ -0,0 +1,633 @@ +/* + * bav335x.h + * + * Copyright (c) 2012-2014 Birdland Audio - http://birdland.com/oem + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_BAV335X_H +#define __CONFIG_BAV335X_H + +#include <configs/ti_am335x_common.h> +#define CONFIG_ENV_IS_NOWHERE + +#ifndef CONFIG_SPL_BUILD +# define CONFIG_FIT +# define CONFIG_TIMESTAMP +# define CONFIG_LZO +# ifdef CONFIG_ENABLE_VBOOT +# define CONFIG_FIT_SIGNATURE +# define CONFIG_RSA +# endif +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM +#define CONFIG_BOARD_LATE_INIT + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* Custom script for NOR */ +#define CONFIG_SYS_LDSCRIPT "board/birdland/bav335x/u-boot.lds" + +/* Always 128 KiB env size */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION + +#ifdef CONFIG_NAND +#define NANDARGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=9,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${fdtaddr} u-boot-spl-os; " \ + "nand read ${loadaddr} kernel; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" +#else +#define NANDARGS "" +#endif + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ +DEFAULT_LINUX_BOOT_ENV \ +"boot_fdt=try\0" \ +"bootpart=0:2\0" \ +"bootdir=\0" \ +"fdtdir=/dtbs\0" \ +"bootfile=zImage\0" \ +"fdtfile=undefined\0" \ +"console=ttyO0,115200n8\0" \ +"loadaddr=0x82000000\0" \ +"fdtaddr=0x88000000\0" \ +"rdaddr=0x88080000\0" \ +"initrd_high=0xffffffff\0" \ +"fdt_high=0xffffffff\0" \ +"partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ +"optargs=\0" \ +"cmdline=\0" \ +"mmcdev=0\0" \ +"mmcpart=1\0" \ +"mmcroot=/dev/mmcblk0p2 ro\0" \ +"mmcrootfstype=ext4 rootwait fixrtc\0" \ +"rootpath=/export/rootfs\0" \ +"nfsopts=nolock\0" \ +"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ +"ramroot=/dev/ram0 rw\0" \ +"ramrootfstype=ext2\0" \ +"mmcargs=setenv bootargs console=${console} ${optargs} " \ + "root=${mmcroot} rootfstype=${mmcrootfstype} ${cmdline}\0" \ +"server_ip=192.168.1.100\0" \ +"gw_ip=192.168.1.1\0" \ +"netmask=255.255.255.0\0" \ +"hostname=\0" \ +"device=eth0\0" \ +"autoconf=off\0" \ +"root_dir=/home/userid/targetNFS\0" \ +"nfs_options=,vers=3\0" \ +"nfsrootfstype=ext4 rootwait fixrtc\0" \ +"nfsargs=setenv bootargs console=${console} ${optargs} " \ + "root=/dev/nfs rw rootfstype=${nfsrootfstype} " \ + "nfsroot=${nfsroot} ip=${ip} ${cmdline}\0" \ +"netargs=setenv bootargs console=${console} " \ + "${optargs} root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw ip=dhcp\0" \ +"bootenv=uEnv.txt\0" \ +"script=boot.scr\0" \ +"scriptfile=${script}\0" \ +"loadbootscript=load mmc ${bootpart} ${loadaddr} ${scriptfile};\0" \ +"bootscript=echo Running bootscript from mmc${bootpart} ...; " \ + "source ${loadaddr}\0" \ + "loadbootenv=load mmc ${bootpart} ${loadaddr} ${bootenv}\0" \ +"importbootenv=echo Importing environment from mmc ...; " \ + "env import -t -r $loadaddr $filesize\0" \ +"ramargs=setenv bootargs console=${console} " \ + "${optargs} root=${ramroot} rootfstype=${ramrootfstype}\0" \ +"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ +"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadrd=load mmc ${bootpart} ${rdaddr} " \ + "${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \ +"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; " \ + "load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ +"mmcboot=mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "gpio set 54;" \ + "setenv bootpart ${mmcdev}:1; " \ + "if test -e mmc ${bootpart} /etc/fstab; then " \ + "setenv mmcpart 1;" \ + "fi; " \ + "echo Checking for: /uEnv.txt ...;" \ + "if test -e mmc ${bootpart} /uEnv.txt; then " \ + "if run loadbootenv; then " \ + "gpio set 55;" \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "echo Checking if uenvcmd is set ...;" \ + "if test -n ${uenvcmd}; then " \ + "gpio set 56; " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "echo Checking if client_ip is set ...;" \ + "if test -n ${client_ip}; then " \ + "if test -n ${dtb}; then " \ + "setenv fdtfile ${dtb};" \ + "echo using ${fdtfile} ...;" \ + "fi;" \ + "gpio set 56; " \ + "if test -n ${uname_r}; then " \ + "echo Running nfsboot_uname_r ...;" \ + "run nfsboot_uname_r;" \ + "fi;" \ + "echo Running nfsboot ...;" \ + "run nfsboot;" \ + "fi;" \ + "fi; " \ + "echo Checking for: /${script} ...;" \ + "if test -e mmc ${bootpart} /${script}; then " \ + "gpio set 55;" \ + "setenv scriptfile ${script};" \ + "run loadbootscript;" \ + "echo Loaded script from ${scriptfile};" \ + "gpio set 56; " \ + "run bootscript;" \ + "fi; " \ + "echo Checking for: /boot/${script} ...;" \ + "if test -e mmc ${bootpart} /boot/${script}; then " \ + "gpio set 55;" \ + "setenv scriptfile /boot/${script};" \ + "run loadbootscript;" \ + "echo Loaded script from ${scriptfile};" \ + "gpio set 56; " \ + "run bootscript;" \ + "fi; " \ + "echo Checking for: /boot/uEnv.txt ...;" \ + "for i in 1 2 3 4 5 6 7 ; do " \ + "setenv mmcpart ${i};" \ + "setenv bootpart ${mmcdev}:${mmcpart};" \ + "if test -e mmc ${bootpart} /boot/uEnv.txt; then " \ + "gpio set 55;" \ + "load mmc ${bootpart} ${loadaddr} " \ + "/boot/uEnv.txt;" \ + "env import -t ${loadaddr} ${filesize};" \ + "echo Loaded environment from /boot/uEnv.txt;" \ + "if test -n ${dtb}; then " \ + "setenv fdtfile ${dtb};" \ + "echo Using: dtb=${fdtfile} ...;" \ + "fi;" \ + "echo Checking if uname_r is set in " \ + "/boot/uEnv.txt...;" \ + "if test -n ${uname_r}; then " \ + "gpio set 56; " \ + "echo Running uname_boot ...;" \ + "setenv mmcroot /dev/mmcblk${mmcdev}" \ + "p${mmcpart} ro;" \ + "run uname_boot;" \ + "fi;" \ + "fi;" \ + "done;" \ + "fi;\0" \ +"netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "tftp ${fdtaddr} ${fdtfile}; " \ + "run netargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ +"nfsboot=echo Booting from ${server_ip} ...; " \ + "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ + "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ + ":${device}:${autoconf}; " \ + "setenv autoload no; " \ + "setenv serverip ${server_ip}; " \ + "setenv ipaddr ${client_ip}; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "tftp ${fdtaddr} dtbs/${fdtfile}; " \ + "run nfsargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ +"nfsboot_uname_r=echo Booting from ${server_ip} ...; " \ + "setenv nfsroot ${server_ip}:${root_dir}${nfs_options}; " \ + "setenv ip ${client_ip}:${server_ip}:${gw_ip}:${netmask}:${hostname}" \ + ":${device}:${autoconf}; " \ + "setenv autoload no; " \ + "setenv serverip ${server_ip}; " \ + "setenv ipaddr ${client_ip}; " \ + "tftp ${loadaddr} vmlinuz-${uname_r}; " \ + "tftp ${fdtaddr} dtbs/${uname_r}/${fdtfile}; " \ + "run nfsargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ +"ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ +"findfdt="\ + "if test $board_rev = B; then " \ + "setenv fdtfile birdland_bav335b.dtb; " \ + "setenv fdtbase am335x-boneblack; fi; " \ + "if test $board_rev = A; then " \ + "setenv fdtfile birdland_bav335a.dtb; " \ + "setenv fdtbase am335x-boneblack; fi; " \ + "if test $fdtfile = undefined; then " \ + "echo WARNING: Could not determine device tree to use; fi; \0" \ +"uname_boot="\ + "setenv bootdir /boot; " \ + "setenv bootfile vmlinuz-${uname_r}; " \ + "if test -e mmc ${bootpart} ${bootdir}/${bootfile}; then " \ + "echo loading ${bootdir}/${bootfile} ...; "\ + "run loadimage;" \ + "setenv fdtdir /boot/dtbs/${uname_r}; " \ + "if test -e mmc ${bootpart} ${fdtdir}/${fdtfile}; then " \ + "run loadfdt;" \ + "else " \ + "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \ + "if test -e mmc ${bootpart} ${fdtdir}/" \ + "${fdtfile}; then " \ + "run loadfdt;" \ + "else " \ + "setenv fdtdir /boot/dtb-${uname_r}; " \ + "if test -e mmc ${bootpart} ${fdtdir}" \ + "/${fdtfile}; then " \ + "run loadfdt;" \ + "else " \ + "setenv fdtdir /boot/dtbs; " \ + "if test -e mmc ${bootpart} ${fdtdir}" \ + "/${fdtfile}; then " \ + "run loadfdt;" \ + "else " \ + "echo; echo unable to find " \ + "[${fdtfile}] " \ + "did you name it correctly?" \ + "echo booting fallback " \ + "[/boot/dtbs/" \ + "${uname_r}" \ + "/${fdtbase}.dtb]...;" \ + "setenv fdtdir /boot/dtbs/" \ + "${uname_r}; " \ + "setenv fdtfile " \ + "${fdtbase}.dtb; " \ + "run loadfdt;" \ + "fi;" \ + "fi;" \ + "fi;" \ + "fi;" \ + "fi; " \ + "setenv rdfile initrd.img-${uname_r}; " \ + "if test -e mmc ${bootpart} ${bootdir}/${rdfile}; then " \ + "echo loading ${bootdir}/${rdfile} ...; "\ + "run loadrd;" \ + "if test -n ${uuid}; then " \ + "setenv mmcroot UUID=${uuid} ro;" \ + "fi;" \ + "run mmcargs;" \ + "echo debug: [${bootargs}] ... ;" \ + "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} " \ + "${fdtaddr}] ... ;" \ + "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ + "else " \ + "run mmcargs;" \ + "echo debug: [${bootargs}] ... ;" \ + "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \ + "bootz ${loadaddr} - ${fdtaddr}; " \ + "fi;" \ +"fi;\0" \ + NANDARGS \ + DFUARGS +#endif + +#define CONFIG_BOOTCOMMAND \ + "gpio set 53; " \ + "i2c mw 0x24 1 0x3e; " \ + "run findfdt; " \ + "setenv mmcdev 0; " \ + "setenv bootpart 0:1; " \ + "run mmcboot;" \ + "gpio clear 56; " \ + "gpio clear 55; " \ + "gpio clear 54; " \ + "setenv mmcdev 1; " \ + "setenv bootpart 1:1; " \ + "run mmcboot;" + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 +#define CONFIG_POWER_TPS65910 + +/* SPL */ +#ifndef CONFIG_NOR_BOOT +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +/* Bootcount using the RTC block */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_AM33XX +#define CONFIG_SYS_BOOTCOUNT_BE + +/* USB gadget RNDIS */ +#define CONFIG_SPL_MUSB_NEW_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" +#endif + +#ifdef CONFIG_NAND +/* NAND: device related configs */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +/* NAND: driver related configs */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_ELM +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { \ + 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW +#define MTDIDS_DEFAULT "nand0=nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=nand.0:" \ + "128k(NAND.SPL)," \ + "128k(NAND.SPL.backup1)," \ + "128k(NAND.SPL.backup2)," \ + "128k(NAND.SPL.backup3)," \ + "256k(NAND.u-boot-spl-os)," \ + "1m(NAND.u-boot)," \ + "128k(NAND.u-boot-env)," \ + "128k(NAND.u-boot-env.backup1)," \ + "8m(NAND.kernel)," \ + "-(NAND.rootfs)" +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x001c0000 +#define CONFIG_ENV_OFFSET_REDUND 0x001e0000 +#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +/* NAND: SPL related configs */ +#ifdef CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_AM33XX_BCH +#endif +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif +#endif /* !CONFIG_NAND */ + +/* + * For NOR boot, we must set this to the start of where NOR is mapped + * in memory. + */ +#ifdef CONFIG_NOR_BOOT +#define CONFIG_SYS_TEXT_BASE 0x08000000 +#endif + +/* + * USB configuration. We enable MUSB support, both for host and for + * gadget. We set USB0 as peripheral and USB1 as host, based on the + * board schematic and physical port wired to each. Then for host we + * add mass storage support and for gadget we add both RNDIS ethernet + * and DFU. + */ +#define CONFIG_USB_MUSB_DSPS +#define CONFIG_ARCH_MISC_INIT +#define CONFIG_MUSB_GADGET +#define CONFIG_MUSB_PIO_ONLY +#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_MUSB_HOST +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST + +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + +#ifdef CONFIG_MUSB_HOST +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#endif + +#ifdef CONFIG_MUSB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE + +/* USB TI's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" +#endif /* CONFIG_MUSB_GADGET */ + +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* disable EFI partitions and partition UUID support */ +#undef CONFIG_PARTITION_UUIDS +#undef CONFIG_EFI_PARTITION +/* General network SPL */ +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "BAV335x U-Boot SPL" +#endif + +/* USB Device Firmware Update support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_CMD_DFU +#define DFU_ALT_INFO_MMC \ + "dfu_alt_info_mmc=" \ + "boot part 0 1;" \ + "rootfs part 0 2;" \ + "MLO fat 0 1;" \ + "MLO.raw raw 0x100 0x100;" \ + "u-boot.img.raw raw 0x300 0x400;" \ + "spl-os-args.raw raw 0x80 0x80;" \ + "spl-os-image.raw raw 0x900 0x2000;" \ + "spl-os-args fat 0 1;" \ + "spl-os-image fat 0 1;" \ + "u-boot.img fat 0 1;" \ + "uEnv.txt fat 0 1\0" +#ifdef CONFIG_NAND +#define CONFIG_DFU_NAND +#define DFU_ALT_INFO_NAND \ + "dfu_alt_info_nand=" \ + "SPL part 0 1;" \ + "SPL.backup1 part 0 2;" \ + "SPL.backup2 part 0 3;" \ + "SPL.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot-spl-os part 0 6;" \ + "kernel part 0 8;" \ + "rootfs part 0 9\0" +#else +#define DFU_ALT_INFO_NAND "" +#endif +#define CONFIG_DFU_RAM +#define DFU_ALT_INFO_RAM \ + "dfu_alt_info_ram=" \ + "kernel ram 0x80200000 0xD80000;" \ + "fdt ram 0x80F80000 0x80000;" \ + "ramdisk ram 0x81000000 0x4000000\0" +#define DFUARGS \ + "dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \ + DFU_ALT_INFO_MMC \ + DFU_ALT_INFO_RAM \ + DFU_ALT_INFO_NAND +#endif + +/* + * Default to using SPI for environment, etc. + * 0x000000 - 0x020000 : SPL (128KiB) + * 0x020000 - 0x0A0000 : U-Boot (512KiB) + * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) + * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) + * 0x0E0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +/* SPL related */ +#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ +#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ +#define MTDIDS_DEFAULT "nor0=m25p80-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ + "512k(u-boot),128k(u-boot-env1)," \ + "128k(u-boot-env2),3464k(kernel)," \ + "-(rootfs)" +#elif defined(CONFIG_EMMC_BOOT) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET 0x0 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#endif + +/* SPI flash. */ +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_SPEED 24000000 + +/* Network. */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +/* + * NOR Size = 16 MiB + * Number of Sectors/Blocks = 128 + * Sector Size = 128 KiB + * Word length = 16 bits + * Default layout: + * 0x000000 - 0x07FFFF : U-Boot (512 KiB) + * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) + * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) + * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) + * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) + */ +#if defined(CONFIG_NOR) +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_FLASH +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE (0x08000000) +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +/* Reduce SPL size by removing unlikey targets */ +#ifdef CONFIG_NOR_BOOT +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ +#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "512k(u-boot)," \ + "128k(u-boot-env1)," \ + "128k(u-boot-env2)," \ + "4m(kernel),-(rootfs)" +#endif +#endif /* NOR support */ + +#endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index e9d5d01620..a558e42c90 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -12,6 +12,31 @@ #ifndef __BUR_AM335X_COMMON_H__ #define __BUR_AM335X_COMMON_H__ /* ------------------------------------------------------------------------- */ +#define BUR_COMMON_ENV \ +"defaultip=192.168.60.253\0" \ +"defaultsip=192.168.60.254\0" \ +"netconsole=echo switching to network console ...; " \ +"if dhcp; then " \ +"setenv ncip ${serverip}; else " \ +"setenv ncip 192.168.60.254; " \ +"setenv serverip 192.168.60.254; " \ +"setenv gatewayip 192.168.60.254; " \ +"setenv ipaddr 192.168.60.1; " \ +"fi;" \ +"setenv netdisplay0 '" \ +"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \ +"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip}\;'" \ +"run netdisplay0; " \ +"setenv stdout nc;setenv stdin nc;setenv stderr nc\0" + +#define CONFIG_CMD_TIME +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (1366*767*4) +#define CONFIG_CMD_UNZIP +#define CONFIG_CMD_BMP +#define CONFIG_BMP_24BMP +#define CONFIG_BMP_32BPP + #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_AM33XX @@ -47,7 +72,7 @@ #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 4 +#define CONFIG_NET_RETRY_COUNT 2 #define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */ @@ -57,7 +82,9 @@ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */ #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" - +/* Network console */ +#define CONFIG_NETCONSOLE 1 +#define CONFIG_BOOTP_MAY_FAIL /* if we don't have DHCP environment */ /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and @@ -110,7 +137,7 @@ * we are on so we do not need to rely on the command prompt. We set a * console baudrate of 115200 and use the default baud rate table. */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_MALLOC_LEN (5120 << 10) #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "U-Boot (BuR V2.0)# " #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -175,7 +202,6 @@ * * ---------------------------------------------------------------------------- */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #undef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 #define CONFIG_SPL_BSS_START_ADDR 0x80A00000 diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h deleted file mode 100644 index 1cb54b3225..0000000000 --- a/include/configs/cm4008.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2004 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=16M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h deleted file mode 100644 index adebd4b7b0..0000000000 --- a/include/configs/cm41xx.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2005 - * Greg Ungerer <greg.ungerer@opengear.com>. - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_KS8695 1 /* it is a KS8695 CPU */ -#define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_DRIVER_KS8695ETH /* use KS8695 ethernet driver */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_KS8695_SERIAL -#define CONFIG_SERIAL1 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#undef CONFIG_CMD_SAVEENV - - -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=32M console=ttyAM0,115200" -#define CONFIG_BOOTCOMMAND "gofsk 0x02200000" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "boot > " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01000000 /* 16 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -#define CONFIG_SYS_INIT_SP_ADDR 0x00020000 /* lowest 128k of RAM */ - -#define PHYS_FLASH_1 0x02000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index b2a9f35797..9feca1b47b 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -365,7 +365,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK /* * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 08bd276b44..7fc364e838 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -2,18 +2,22 @@ * Toradex Colibri PXA270 configuration file * * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2015 Marcel Ziswiler <marcel@ziswiler.com> * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_H +#define __CONFIG_H /* * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0x0 +/* Avoid overwriting factory configuration block */ +#define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings @@ -22,13 +26,13 @@ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ + "if fatload mmc 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ - "bootm 0x80000;" + "bootm 0xc0000;" #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ @@ -50,6 +54,8 @@ */ #include <config_cmd_default.h> +#undef CONFIG_CMD_LOADB /* Both together */ +#undef CONFIG_CMD_LOADS /* saves 10 KB */ #define CONFIG_CMD_NET #define CONFIG_CMD_ENV #undef CONFIG_CMD_IMLS @@ -59,7 +65,6 @@ /* * Networking Configuration - * chip on the Voipac PXA270 board */ #ifdef CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -82,7 +87,7 @@ */ #define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_LONGHELP +#undef CONFIG_SYS_LONGHELP /* Saves 10 KB */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else @@ -96,7 +101,6 @@ #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE 1 - /* * Clock Configuration */ @@ -142,25 +146,24 @@ #else /* No flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x40000 +/* Skip factory configuration block */ #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000) #define CONFIG_ENV_SIZE 0x40000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * GPIO settings */ #define CONFIG_SYS_GPSR0_VAL 0x00000000 #define CONFIG_SYS_GPSR1_VAL 0x00020000 -#define CONFIG_SYS_GPSR2_VAL 0x0002C000 +#define CONFIG_SYS_GPSR2_VAL 0x0002c000 #define CONFIG_SYS_GPSR3_VAL 0x00000000 #define CONFIG_SYS_GPCR0_VAL 0x00000000 @@ -168,19 +171,19 @@ #define CONFIG_SYS_GPCR2_VAL 0x00000000 #define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x08000000 -#define CONFIG_SYS_GPDR1_VAL 0x0002A981 -#define CONFIG_SYS_GPDR2_VAL 0x0202FC00 -#define CONFIG_SYS_GPDR3_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0xc8008000 +#define CONFIG_SYS_GPDR1_VAL 0xfc02a981 +#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff +#define CONFIG_SYS_GPDR3_VAL 0x0061e804 -#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00C00010 -#define CONFIG_SYS_GAFR1_L_VAL 0x999A901A -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008 -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x0109A000 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000300 -#define CONFIG_SYS_GAFR3_U_VAL 0x00024001 +#define CONFIG_SYS_GAFR0_L_VAL 0x80100000 +#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010 +#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008 +#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002 +#define CONFIG_SYS_GAFR3_L_VAL 0x54000310 +#define CONFIG_SYS_GAFR3_U_VAL 0x00005401 #define CONFIG_SYS_PSSR_VAL 0x30 @@ -193,26 +196,26 @@ /* * Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x000095f2 -#define CONFIG_SYS_MSC1_VAL 0x00007ff4 -#define CONFIG_SYS_MSC2_VAL 0x00000000 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ac9 -#define CONFIG_SYS_MDREFR_VAL 0x2013e01e -#define CONFIG_SYS_MDMRS_VAL 0x00320032 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2 +#define CONFIG_SYS_MSC1_VAL 0x9ee1f994 +#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1 +#define CONFIG_SYS_MDCNFG_VAL 0x090009c9 +#define CONFIG_SYS_MDREFR_VAL 0x2003a031 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 /* * PCMCIA and CF Interfaces */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00028307 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT0_VAL 0x00038787 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO0_VAL 0x0002830f #define CONFIG_SYS_MCIO1_VAL 0x0001430f #include "pxa-common.h" -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1c69551d16..84b047e53f 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -213,8 +213,6 @@ #undef CONFIG_SPL_TEXT_BASE #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ -#undef CONFIG_SPL_STACK -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16 diff --git a/include/configs/dkb.h b/include/configs/dkb.h deleted file mode 100644 index 7ffbb14e30..0000000000 --- a/include/configs/dkb.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2011 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Lei Wen <leiwen@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_DKB_H -#define __CONFIG_DKB_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-TTC DKB" - -/* - * High Level Configuration Options - */ -#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ -#define CONFIG_PANTHEON 1 /* SOC Family Name */ -#define CONFIG_MACH_TTC_DKB 1 /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include <config_cmd_default.h> -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#undef CONFIG_ARCH_MISC_INIT - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#define CONFIG_ENV_SIZE 0x20000 /* 64k */ - -#endif /* __CONFIG_DKB_H */ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 981233a070..ea6e5c0329 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -37,6 +37,10 @@ #define CONFIG_KW88F6281 1 /* SOC Name */ #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_SYS_GENERIC_BOARD + +/* Add target to build it automatically upon "make" */ +#define CONFIG_BUILD_TARGET "u-boot.kwb" /* * Commands configuration diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 59676ae61b..87f8db0fba 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -24,6 +24,9 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_USE_ARCH_MEMSET + /* Keep L2 Cache Disabled */ #define CONFIG_CMD_CACHE diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index fe72bd0d3b..b42dab7a7f 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -38,4 +38,20 @@ #define CONFIG_BOARD_REV_GPIO_COUNT 2 +#define CONFIG_PHY_IRAM_BASE 0x02020000 + +/* Address for relocating helper code (Last 4 KB of IRAM) */ +#define CONFIG_EXYNOS_RELOCATE_CODE_BASE (CONFIG_IRAM_TOP - 0x1000) + +/* + * Low Power settings + */ +#define CONFIG_LOWPOWER_FLAG 0x02020028 +#define CONFIG_LOWPOWER_ADDR 0x0202002C + +/* + * Number of CPUs available + */ +#define CONFIG_CORE_COUNT 0x8 + #endif /* __CONFIG_EXYNOS5420_H */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index bf02829cde..854ae90bd4 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -22,6 +22,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_GENERIC_BOARD /* Only in case the value is not present in mach-types.h */ #ifndef MACH_TYPE_FLEA3 @@ -124,8 +125,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/gose.h b/include/configs/gose.h index 44c8a3053a..0dc28c7ece 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -39,8 +39,6 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE -#define CONFIG_CONS_SCIF0 -#define CONFIG_SCIF_USE_EXT_CLK /* FLASH */ #define CONFIG_SYS_NO_FLASH @@ -68,7 +66,6 @@ #define RMOBILE_XTAL_CLK 20000000u #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) -#define CONFIG_SH_SCIF_CLK_FREQ 14745600 #define CONFIG_SYS_TMU_CLK_DIV 4 /* I2C */ @@ -101,4 +98,10 @@ /* SCIF0 */ #define CONFIG_SMSTP7_ENA 0x00200000 +/* SDHI */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_SH_SDHI_FREQ 97500000 + #endif /* __GOSE_H */ diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 404c56af10..0ac198df8d 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -26,6 +26,11 @@ #endif /* + * Generic board support + */ +#define CONFIG_SYS_GENERIC_BOARD + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h deleted file mode 100644 index 1d78e725e3..0000000000 --- a/include/configs/hawkboard.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_SYS_USE_NAND 1 - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_HAWK -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" - -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_EMAC | \ - DAVINCI_SYSCFG_SUSPSRC_I2C | \ - DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2) - -#if defined(CONFIG_UART_U_BOOT) -#define CONFIG_SYS_TEXT_BASE 0xc1080000 -#elif !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_TEXT_BASE 0xc1180000 -#endif - -/* Spl */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_LIBGENERIC_SUPPORT /* for udelay and __div64_32 for NAND */ -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-hawk.lds" -#define CONFIG_SPL_TEXT_BASE 0xc1080000 -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 -\ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MONITOR_LEN 0x60000 - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * Network & Ethernet Configuration - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* - * Nand Flash - */ -#ifdef CONFIG_SYS_USE_NAND -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_CLE_MASK 0x10 -#define CONFIG_ALE_MASK 0x8 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST /* SPL nand driver configuration */ -#define CFG_DAVINCI_STD_NAND_LAYOUT -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_PAGE_2K -/* Max number of NAND devices */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE_LIST { 0x62000000, } -/* Block 0--not used by bootcode */ -#define CONFIG_ENV_OFFSET 0x0 - -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ - CONFIG_SYS_NAND_U_BOOT_SIZE - \ - CONFIG_SYS_MALLOC_LEN - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { \ - 24, 25, 26, 27, 28, \ - 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ - 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ - 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ - 59, 60, 61, 62, 63 } -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 10 -#define CONFIG_SYS_NAND_OOBSIZE 64 - -#endif /* CONFIG_SYS_USE_NAND */ - -/* USB Configs */ -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_OHCI_DA8XX -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000 -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard" - -/* - * U-Boot general configuration - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "hawkboard > " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS \ - "mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0xc1180000,"\ - "4M ip=static" -#define CONFIG_BOOTDELAY 3 - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifdef CONFIG_SYS_USE_NAND -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_NAND -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 4195fa3533..49039d6dfb 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -18,6 +18,8 @@ #define CONFIG_MX31 /* This is a mx31 */ #define CONFIG_MX31_CLK32 32000 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 310d5e2106..664a2b25f3 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -18,6 +18,7 @@ /* * Board */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DRIVER_TI_EMAC #define CONFIG_BARIX_IPAM390 diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h deleted file mode 100644 index 8175621338..0000000000 --- a/include/configs/jadecpu.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - * (C) Copyright 2010 - * Matthias Weisser <weisserm@arcor.de> - * - * Configuation settings for the jadecpu board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MB86R0x -#define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_TEXT_BASE 0x10000000 - - -#define CONFIG_USE_ARCH_MEMCPY -#define CONFIG_USE_ARCH_MEMSET - -#define MACH_TYPE_JADECPU 2636 - -#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU - -/* - * Environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "gs_fast_boot=setenv bootdelay 5\0" \ - "gs_slow_boot=setenv bootdelay 10\0" \ - "bootcmd=dcache off; mw.l 0x40000000 0 1024; usb start;" \ - "fatls usb 0; fatload usb 0 0x40000000 jadecpu-init.bin;" \ - "bootelf 0x40000000\0" \ - "" - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_BOARD_LATE_INIT - -/* - * Compressions - */ -#define CONFIG_LZO - -/* - * Hardware drivers - */ - -/* - * Serial - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_NS16550_COM1 0xfffe1000 /* UART 0 */ -#define CONFIG_SYS_NS16550_COM2 0xfff50000 /* UART 2 */ -#define CONFIG_SYS_NS16550_COM3 0xfff51000 /* UART 3 */ -#define CONFIG_SYS_NS16550_COM4 0xfff43000 /* UART 4 */ - -#define CONFIG_CONS_INDEX 4 - -/* - * Ethernet - */ -#define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE 0x02000000 -#define CONFIG_SMC911X_16_BIT - -/* - * Video - */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_MB86R0xGDC -#define CONFIG_SYS_WHITE_ON_BLACK -#define CONFIG_CFB_CONSOLE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024) -#define VIDEO_FB_16BPP_WORD_SWAP -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_stub_tstc -#define VIDEO_GETC_FCT serial_stub_getc - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_XIMG - -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_CACHE - -#define CONFIG_SYS_HUSH_PARSER - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0xFFF81000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mb86r0x" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x40000000 /* Start address of DDRRAM */ -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR 0x01008000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) - -/* - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster */ - -#define CONFIG_SYS_LOAD_ADDR 0x40000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "jade> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 - -#define CONFIG_PREBOOT "" - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "delaygs" -#define CONFIG_AUTOBOOT_STOP_STR "stopgs" - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (10 << 20) -#define CONFIG_SYS_MEM_TOP_HIDE (4 << 20) - -/* - * Clock reset generator init - */ -#define CONFIG_SYS_CRG_CRHA_INIT 0xffff -#define CONFIG_SYS_CRG_CRPA_INIT 0xffff -#define CONFIG_SYS_CRG_CRPB_INIT 0xfffe -#define CONFIG_SYS_CRG_CRHB_INIT 0xffff -#define CONFIG_SYS_CRG_CRAM_INIT 0xffef - -/* - * Memory controller settings - */ -#define CONFIG_SYS_MEMC_MCFMODE0_INIT 0x00000001 /* 16bit */ -#define CONFIG_SYS_MEMC_MCFMODE2_INIT 0x00000001 /* 16bit */ -#define CONFIG_SYS_MEMC_MCFMODE4_INIT 0x00000021 /* 16bit, Page*/ -#define CONFIG_SYS_MEMC_MCFTIM0_INIT 0x16191008 -#define CONFIG_SYS_MEMC_MCFTIM2_INIT 0x03061008 -#define CONFIG_SYS_MEMC_MCFTIM4_INIT 0x03061804 -#define CONFIG_SYS_MEMC_MCFAREA0_INIT 0x000000c0 /* 0x0c000000 1MB */ -#define CONFIG_SYS_MEMC_MCFAREA2_INIT 0x00000020 /* 0x02000000 1MB */ -#define CONFIG_SYS_MEMC_MCFAREA4_INIT 0x001f0000 /* 0x10000000 32 MB */ - -/* - * DDR2 controller init settings - */ -#define CONFIG_SYS_DDR2_DRIMS_INIT 0x5555 -#define CONFIG_SYS_CCNT_CDCRC_INIT_1 0x00000002 -#define CONFIG_SYS_CCNT_CDCRC_INIT_2 0x00000003 -#define CONFIG_SYS_DDR2_DRIC1_INIT 0x003f -#define CONFIG_SYS_DDR2_DRIC2_INIT 0x0000 -#define CONFIG_SYS_DDR2_DRCA_INIT 0xc124 /* 512Mbit DDR2SDRAM x 2 */ -#define CONFIG_SYS_DDR2_DRCM_INIT 0x0032 -#define CONFIG_SYS_DDR2_DRCST1_INIT 0x3418 -#define CONFIG_SYS_DDR2_DRCST2_INIT 0x6e32 -#define CONFIG_SYS_DDR2_DRCR_INIT 0x0141 -#define CONFIG_SYS_DDR2_DRCF_INIT 0x0002 -#define CONFIG_SYS_DDR2_DRASR_INIT 0x0001 -#define CONFIG_SYS_DDR2_DROBS_INIT 0x0001 -#define CONFIG_SYS_DDR2_DROABA_INIT 0x0103 -#define CONFIG_SYS_DDR2_DRIBSODT1_INIT 0x003F -#define CONFIG_SYS_DDR2_DROS_INIT 0x0001 - -/* - * DRAM init sequence - */ - -/* PALL Command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_1 0x0017 -#define CONFIG_SYS_DDR2_INIT_DRIC2_1 0x0400 - -/* EMR(2) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_2 0x0006 -#define CONFIG_SYS_DDR2_INIT_DRIC2_2 0x0000 - -/* EMR(3) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_3 0x0007 -#define CONFIG_SYS_DDR2_INIT_DRIC2_3 0x0000 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_4 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_4 0x0000 - -/* MRS command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_5 0x0004 -#define CONFIG_SYS_DDR2_INIT_DRIC2_5 0x0532 - -/* PALL command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_6 0x0017 -#define CONFIG_SYS_DDR2_INIT_DRIC2_6 0x0400 - -/* REF command 1 */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_7 0x000f -#define CONFIG_SYS_DDR2_INIT_DRIC2_7 0x0000 - -/* MRS command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_8 0x0004 -#define CONFIG_SYS_DDR2_INIT_DRIC2_8 0x0432 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_9 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_9 0x0380 - -/* EMR(1) command */ -#define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 -#define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 - -#endif /* __CONFIG_H */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index c14889ce30..1dffab1374 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -39,8 +39,6 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE -#define CONFIG_CONS_SCIF0 -#define CONFIG_SCIF_USE_EXT_CLK /* FLASH */ #define CONFIG_SYS_NO_FLASH @@ -68,7 +66,6 @@ #define RMOBILE_XTAL_CLK 20000000u #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) -#define CONFIG_SH_SCIF_CLK_FREQ 14745600 #define CONFIG_SYS_TMU_CLK_DIV 4 /* i2c */ @@ -92,7 +89,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_USB_STORAGE - /* Module stop status bits */ /* INTC-RT */ #define CONFIG_SMSTP0_ENA 0x00400000 @@ -103,4 +99,10 @@ /* SCIF0 */ #define CONFIG_SMSTP7_ENA 0x00200000 +/* SD */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_SH_SDHI_FREQ 97500000 + #endif /* __KOELSCH_H */ diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 29b263f301..dd30df27b0 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -14,6 +14,11 @@ #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ +#define CONFIG_AM335X_LCD +#define CONFIG_LCD +#define CONFIG_LCD_NOSTDOUT +#define CONFIG_SYS_WHITE_ON_BLACK +#define LCD_BPP LCD_COLOR32 /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -38,57 +43,71 @@ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ #define CONFIG_SPL_MMC_SUPPORT -#undef CONFIG_SPL_OS_BOOT -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -#endif /* CONFIG_SPL_OS_BOOT */ - -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +/* Always 64 KiB env size */ +#define CONFIG_ENV_SIZE (64 << 10) #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=0\0" \ - "loadaddr=0x80100000\0" \ - "bootfile=arimg\0" \ - "usbboot=echo Booting from USB-Stick ...; " \ - "usb start; " \ - "fatload usb 0 ${loadaddr} ${bootfile}; " \ - "usb stop; " \ - "go ${loadaddr};\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload 0; " \ - "dhcp; " \ - "tftp ${loadaddr} arimg; " \ - "go ${loadaddr}\0" \ - "usbupdate=echo Updating UBOOT from USB-Stick ...; " \ - "usb start; " \ - "fatload usb 0 0x80000000 updateubootusb.img; " \ - "source;\0" \ - "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ - "setenv autoload 0; " \ - "dhcp;" \ - "tftp 0x80000000 updateUBOOT.img;" \ - "source;\0" +BUR_COMMON_ENV \ +"vx_romfsbase=0x800E0000\0" \ +"vx_romfssize=0x20000\0" \ +"vx_memtop=0x8FBEF000\0" \ +"loadromfs=mmc read ${vx_romfsbase} 700 100\0" \ +"autoload=0\0" \ +"loadaddr=0x80100000\0" \ +"logoaddr=0x82000000\0" \ +"defaultARlen=0x8000\0" \ +"loaddefaultAR=mmc read ${loadaddr} 800 ${defaultARlen}\0" \ +"defaultAR=run loadromfs; run loaddefaultAR; go ${loadaddr}\0" \ +"logo0=fatload mmc 0:1 ${logoaddr} SYSTEM/ADDON/Bootlogo/Bootlogo.bmp.gz && " \ + "bmp display ${logoaddr} 0 0\0" \ +"logo1=fatload mmc 0:1 ${logoaddr} SYSTEM/BASE/Bootlogo/Bootlogo.bmp.gz && " \ + "bmp display ${logoaddr} 0 0\0" \ +"mmcboot=echo booting AR from eMMC-flash ...; "\ + "run logo0 || run logo1; " \ + "run loadromfs; " \ + "fatload mmc 0:1 ${loadaddr} arimg && go ${loadaddr}; " \ + "run defaultAR;\0" \ +"netboot=echo booting AR from network ...; " \ + "run loadromfs; " \ + "tftp ${loadaddr} arimg && go ${loadaddr}; " \ + "puts 'networkboot failed!';\0" \ +"usbupdate=echo updating u-boot from usb ...; " \ + "usb start; " \ + "fatload usb 0 0x80000000 updateubootusb.img && source; " \ + "puts 'usbupdate failed!'\0" \ +"netscript=echo running script from network (tftp) ...; " \ + "tftp 0x80000000 netscript.img && source; " \ + "puts 'netscript load failed!'\0" \ +"netupdate=tftp ${loadddr} MLO && mmc write ${loadaddr} 100 100; " \ + "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 300\0" \ +"netupdatedefaultAR=echo updating defaultAR from network (tftp) ...; " \ + "if tftp 0x80100000 arimg.bin; " \ + "then mmc write 0x80100000 800 ${defaultARlen}; " \ + "else setcurs 1 8; puts 'defAR update failed (tftp)!'; fi;\0" \ +"netupdateROMFS=echo updating romfs from network (tftp) ...; " \ + "if tftp 0x80100000 romfs.bin; " \ + "then mmc write 0x80100000 700 100; " \ + "else setcurs 1 8; puts 'romfs update failed (tftp)!'; fi;\0" + #endif /* !CONFIG_SPL_BUILD*/ #define CONFIG_BOOTCOMMAND \ "run usbupdate;" -#define CONFIG_BOOTDELAY 1 /* TODO: für release auf 0 setzen */ +#define CONFIG_BOOTDELAY 0 /* undefine command which we not need here */ -#undef CONFIG_BOOTM_LINUX #undef CONFIG_BOOTM_NETBSD #undef CONFIG_BOOTM_PLAN9 #undef CONFIG_BOOTM_RTEMS -#undef CONFIG_GZIP -#undef CONFIG_ZLIB +#undef CONFIG_CMD_CRC32 + +/* Support both device trees and ATAGs. */ +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMD_BOOTZ /* USB configuration */ #define CONFIG_USB_MUSB_DSPS @@ -100,6 +119,8 @@ #define CONFIG_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST #ifdef CONFIG_MUSB_HOST #define CONFIG_CMD_USB diff --git a/include/configs/lager.h b/include/configs/lager.h index 291267f0f0..e830c6df0a 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -39,8 +39,6 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE -#define CONFIG_CONS_SCIF0 -#define CONFIG_SCIF_USE_EXT_CLK /* SPI */ #define CONFIG_SPI @@ -83,7 +81,6 @@ #define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) #define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) #define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) -#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ #define CONFIG_SYS_TMU_CLK_DIV 4 @@ -112,4 +109,7 @@ /* SCIF0 */ #define CONFIG_SMSTP7_ENA 0x00200000 +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 97500000 + #endif /* __LAGER_H */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 2874ccc6fa..3dc4da391b 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -510,6 +510,30 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0a0bb5f109..a13876b550 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -303,6 +303,30 @@ #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x08000000 /* 128M */ + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_E1000 +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 01c85666dd..f80efedeb2 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -13,6 +13,7 @@ #define CONFIG_FSL_LSCH3 #define CONFIG_LS2085A #define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 /* Errata fixes */ #define CONFIG_ARM_ERRATA_828024 @@ -30,9 +31,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_IDENT_STRING " LS2085A-EMU" -#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" - /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP @@ -213,12 +211,10 @@ #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #define CONFIG_SYS_LS_MC_FW_IN_NOR #define CONFIG_SYS_LS_MC_FW_ADDR 0x580200000ULL -/* TODO Actual FW length needs to be determined at runtime from FW header */ -#define CONFIG_SYS_LS_MC_FW_LENGTH (4U * 1024 * 1024) #define CONFIG_SYS_LS_MC_DPL_IN_NOR #define CONFIG_SYS_LS_MC_DPL_ADDR 0x5806C0000ULL /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPL_LENGTH 4096 +#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH (256 * 1024) #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0xe00000 /* Carve the MC private DRAM block from the end of DRAM */ @@ -252,7 +248,8 @@ /* Physical Memory Map */ /* fixme: these need to be checked against the board */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_SYS_CLK_FREQ 133333333 +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_NR_DRAM_BANKS 3 @@ -272,12 +269,14 @@ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_start=0x581200000\0" \ - "kernel_load=0x806f0000\0" \ + "kernel_load=0xa0000000\0" \ "kernel_size=0x1000000\0" \ "console=ttyAMA0,38400n8\0" -#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlyprintk=uart8250-8bit,0x21c0600" +#define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0600,115200 " \ + "default_hugepagesz=2m hugepagesz=2m " \ + "hugepages=16" #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 1 diff --git a/include/configs/ls2085a_emu.h b/include/configs/ls2085a_emu.h index 487cd99c5d..a02d69450b 100644 --- a/include/configs/ls2085a_emu.h +++ b/include/configs/ls2085a_emu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-EMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-EMU" + #define CONFIG_DDR_SPD #define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -17,4 +20,5 @@ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */ +#define CONFIG_FSL_DDR_SYNC_REFRESH #endif /* __LS2_EMU_H */ diff --git a/include/configs/ls2085a_simu.h b/include/configs/ls2085a_simu.h index 0f40b787b4..af34f3f95d 100644 --- a/include/configs/ls2085a_simu.h +++ b/include/configs/ls2085a_simu.h @@ -9,6 +9,9 @@ #include "ls2085a_common.h" +#define CONFIG_IDENT_STRING " LS2085A-SIMU" +#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-SIMU" + /* SMSC 91C111 ethernet configuration */ #define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE (0x2210000) diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 0f4bd91c64..bed071fa66 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -14,6 +14,8 @@ /* High Level Configuration Options */ #define CONFIG_MX31 1 /* This is a mx31 */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index a145f0812f..857dd071f4 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -19,6 +19,7 @@ #define CONFIG_MX35 #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_GENERIC_BOARD /* Set TEXT at the beginning of the NOR flash */ #define CONFIG_SYS_TEXT_BASE 0xA0000000 @@ -146,8 +147,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 42bc3c869f..8d8b93cca5 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -24,6 +24,8 @@ #define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index e0528ce4b9..29b72b2e9d 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -28,6 +28,8 @@ #define CONFIG_SYS_PL310_BASE L2_PL310_BASE #endif +#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE + #define CONFIG_MP #define CONFIG_MXC_GPT_HCLK diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 4aa8101524..f0e37f0ca6 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -53,6 +53,8 @@ #define CONFIG_GENERIC_MMC #define CONFIG_BOUNCE_BUFFER #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -276,4 +278,18 @@ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + #endif /* __MX6QSABRE_COMMON_CONFIG_H */ diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index c567d9dbb6..122141846e 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -48,6 +48,18 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 8b47537614..5ee0abe02a 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -29,6 +29,9 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +/* Reserve the last 1 MiB for the secure firmware */ +#define CONFIG_SYS_MEM_TOP_HIDE (1UL << 20UL) +#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE @@ -56,8 +59,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MEM_TOP_HIDE (SZ_1M) /* ram console */ - #define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 9fa86603f6..c395020919 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -25,13 +25,11 @@ #define CONFIG_CMD_MMC -/* - * FIXME: The number of bank is actually 8. But there is no way to reserve the - * last 16 Mib in the last bank now. So I just excluded the last bank - * temporally. - */ -#define CONFIG_NR_DRAM_BANKS 7 +#define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +/* Reserve the last 22 MiB for the secure firmware */ +#define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL) +#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h new file mode 100644 index 0000000000..3030054949 --- /dev/null +++ b/include/configs/omap3_cairo.h @@ -0,0 +1,286 @@ +/* + * Configuration settings for the QUIPOS Cairo board. + * + * Copyright (C) DENX GmbH + * + * Author : + * Albert ARIBAUD <albert.aribaud@3adev.fr> + * + * Derived from EVM code by + * Manikandan Pillai <mani.pillai@ti.com> + * Itself derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * Also derived from include/configs/omap3_beagle.h + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __OMAP3_CAIRO_CONFIG_H +#define __OMAP3_CAIRO_CONFIG_H + +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. We use this rather than the inherited defines from + * ti_armv7_common.h for backwards compatibility. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /* 512 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +#define CONFIG_NAND + +#include <configs/ti_omap3_common.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +#define CONFIG_MISC_INIT_R + +#define CONFIG_REVISION_TAG 1 +#define CONFIG_ENV_OVERWRITE + +/* Enable Multi Bus support for I2C */ +#define CONFIG_I2C_MULTI_BUS 1 + +/* Probe all devices */ +#define CONFIG_SYS_I2C_NOPROBES { {0x0, 0x0} } + +#define CONFIG_NAND + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_SETEXPR /* Evaluate expressions */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK + +/* Disable some commands */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_LED 1 + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_QUIET_TEST 1 +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +/* override default CONFIG_BOOTDELAY */ +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "machid=ffffffff\0" \ + "fdt_high=0x87000000\0" \ + "baudrate=115200\0" \ + "ethaddr=00:50:C2:7E:90:F0\0" \ + "fec_addr=00:50:C2:7E:90:F0\0" \ + "netmask=255.255.255.0\0" \ + "ipaddr=192.168.2.9\0" \ + "gateway=192.168.2.1\0" \ + "serverip=192.168.2.10\0" \ + "nfshost=192.168.2.10\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "bootargs_mmc_ramdisk=mem=128M " \ + "console=ttyO1,115200n8 " \ + "root=/dev/ram0 rw " \ + "initrd=0x81600000,16M " \ + "mpurate=600 ramdisk_size=16384 omapfb.rotate=1 " \ + "omapfb.rotate_type=1 omap_vout.vid1_static_vrfb_alloc=y\0" \ + "mmcboot=mmc init; " \ + "fatload mmc 0 0x80000000 uImage; " \ + "fatload mmc 0 0x81600000 ramdisk.gz; " \ + "setenv bootargs ${bootargs_mmc_ramdisk}; " \ + "bootm 0x80000000\0" \ + "bootargs_nfs=mem=99M console=ttyO0,115200n8 noinitrd rw ip=dhcp " \ + "root=/dev/nfs " \ + "nfsroot=192.168.2.10:/home/spiid/workdir/Quipos/rootfs,nolock " \ + "mpurate=600 omapfb.rotate=1 omapfb.rotate_type=1 " \ + "omap_vout.vid1_static_vrfb_alloc=y\0" \ + "boot_nfs=run get_kernel; setenv bootargs ${bootargs_nfs}; " \ + "bootm 0x80000000\0" \ + "bootargs_nand=mem=128M console=ttyO1,115200n8 noinitrd " \ + "root=/dev/mtdblock4 rw rootfstype=jffs2 mpurate=600 " \ + "omap_vout.vid1_static_vrfb_alloc=y omapfb.rotate=1 " \ + "omapfb.rotate_type=1\0" \ + "boot_nand=nand read.i 0x80000000 280000 300000; setenv " \ + "bootargs ${bootargs_nand}; bootm 0x80000000\0" \ + "ledorange=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ + "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ + "i2c mw 60 09 10 1; i2c mw 60 06 10 1\0" \ + "ledgreen=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ + "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; i2c " \ + "mw 60 09 00 1; i2c mw 60 06 10 1\0" \ + "ledoff=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ + "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ + "i2c mw 60 09 00 1; i2c mw 60 06 0 1\0" \ + "ledred=i2c dev 1; i2c mw 60 00 00 1; i2c mw 60 14 FF 1; " \ + "i2c mw 60 15 FF 1; i2c mw 60 16 FF 1; i2c mw 60 17 FF 1; " \ + "i2c mw 60 09 10 1; i2c mw 60 06 0 1\0" \ + "flash_xloader=mw.b 0x81600000 0xff 0x20000; " \ + "nand erase 0 20000; " \ + "fatload mmc 0 0x81600000 MLO; " \ + "nandecc hw; " \ + "nand write.i 0x81600000 0 20000;\0" \ + "flash_uboot=mw.b 0x81600000 0xff 0x40000; " \ + "nand erase 80000 40000; " \ + "fatload mmc 0 0x81600000 u-boot.bin; " \ + "nandecc sw; " \ + "nand write.i 0x81600000 80000 40000;\0" \ + "flash_kernel=mw.b 0x81600000 0xff 0x300000; " \ + "nand erase 280000 300000; " \ + "fatload mmc 0 0x81600000 uImage; " \ + "nandecc sw; " \ + "nand write.i 0x81600000 280000 300000;\0" \ + "flash_rootfs=fatload mmc 0 0x81600000 rootfs.jffs2; " \ + "nandecc sw; " \ + "nand write.jffs2 0x680000 0xFF ${filesize}; " \ + "nand erase 680000 ${filesize}; " \ + "nand write.jffs2 81600000 680000 ${filesize};\0" \ + "flash_scrub=nand scrub; " \ + "run flash_xloader; " \ + "run flash_uboot; " \ + "run flash_kernel; " \ + "run flash_rootfs;\0" \ + "flash_all=run ledred; " \ + "nand erase.chip; " \ + "run ledorange; " \ + "run flash_xloader; " \ + "run flash_uboot; " \ + "run flash_kernel; " \ + "run flash_rootfs; " \ + "run ledgreen; " \ + "run boot_nand; \0" \ + +#define CONFIG_BOOTCOMMAND \ + "if fatload mmc 0 0x81600000 MLO; then run flash_all; " \ + "else run boot_nand; fi" + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE NAND_BASE +#endif + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP + +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#define CONFIG_OMAP3_SPI + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* Defines for SPL */ +#define CONFIG_SPL_OMAP3_ID_NAND + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif + +/* env defaults */ +#define CONFIG_BOOTFILE "uImage" + +/* Override OMAP3 common serial console configuration from UART3 + * to UART2. + * + * Attention: for UART2, special MUX settings (MUX_DEFAULT(), MCBSP3) + * are needed and peripheral clocks for UART2 must be enabled in + * function per_clocks_enable(). + */ +#undef CONFIG_CONS_INDEX +#define CONFIG_CONS_INDEX 2 +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_SYS_NS16550_COM3 +#define CONFIG_SYS_NS16550_COM2 OMAP34XX_UART2 +#undef CONFIG_SERIAL3 +#define CONFIG_SERIAL2 +#endif + +/* Keep old prompt in case some existing script depends on it */ +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "Cairo # " + +/* Provide MACH_TYPE for compatibility with non-DT kernels */ +#define MACH_TYPE_OMAP3_CAIRO 3063 +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CAIRO + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#endif /* __OMAP3_CAIRO_CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 8885e17581..e7df15400d 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -259,7 +259,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 6295ec505f..a5e7d8f6a4 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,21 +29,24 @@ #define CONFIG_REVISION_TAG 1 -/* Status LED */ +/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */ +#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032) #define CONFIG_STATUS_LED #define CONFIG_BOARD_SPECIFIC_LED #define CONFIG_GPIO_LED #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) #define RED_LED_GPIO 27 -#endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define RED_LED_GPIO 16 +#else +#error "status LED not defined for this machine." #endif #define RED_LED_DEV 0 #define STATUS_LED_BIT RED_LED_GPIO #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) #define STATUS_LED_BOOT RED_LED_DEV +#endif /* GPIO banks */ #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h index c061e93534..3c60b4f12b 100644 --- a/include/configs/ot1200.h +++ b/include/configs/ot1200.h @@ -131,6 +131,16 @@ #define CONFIG_PHYLIB #define CONFIG_PHY_SMSC +#ifndef CONFIG_SPL +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_BUS 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#endif + /* Miscellaneous commands */ #define CONFIG_CMD_BMODE #define CONFIG_CMD_SETEXPR diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 9480d8daf2..7dbc9aee3a 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -114,7 +114,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 8abce1b425..75506b22f3 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -116,7 +116,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */ /* diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index 6490be5504..bd0f44b0d8 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -117,7 +117,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* diff --git a/include/configs/porter.h b/include/configs/porter.h new file mode 100644 index 0000000000..9703c840b7 --- /dev/null +++ b/include/configs/porter.h @@ -0,0 +1,112 @@ +/* + * include/configs/porter.h + * This file is Porter board configuration. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __PORTER_H +#define __PORTER_H + +#undef DEBUG +#define CONFIG_R8A7791 +#define CONFIG_RMOBILE_BOARD_STRING "Porter" + +#include "rcar-gen2-common.h" + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else +#define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffC +#endif +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define RCAR_GEN2_SDRAM_BASE 0x40000000 +#define RCAR_GEN2_SDRAM_SIZE (2048u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (1024u * 1024 * 1024) + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE + +/* FLASH */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_STORAGE + +/* SD */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_SH_SDHI_FREQ 97500000 + +/* Module stop status bits */ +/* INTC-RT */ +#define CONFIG_SMSTP0_ENA 0x00400000 +/* MSIF */ +#define CONFIG_SMSTP2_ENA 0x00002000 +/* INTC-SYS, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 +/* SCIF0 */ +#define CONFIG_SMSTP7_ENA 0x00200000 + +#endif /* __PORTER_H */ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index c33f1cb880..e9ef7cc980 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -35,6 +35,8 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) + /* Support File sytems */ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 21e13e5473..c7affd6f3a 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -142,7 +142,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (101 * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/silk.h b/include/configs/silk.h index a4235e94d0..161e0a5e26 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -39,8 +39,6 @@ /* SCIF */ #define CONFIG_SCIF_CONSOLE -#define CONFIG_CONS_SCIF2 -#define CONFIG_SCIF_USE_EXT_CLK /* FLASH */ #define CONFIG_SPI @@ -71,7 +69,6 @@ #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ #define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) #define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) -#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */ #define CONFIG_SYS_TMU_CLK_DIV 4 @@ -104,6 +101,9 @@ #define CONFIG_SH_MMCIF_ADDR 0xee200000 #define CONFIG_SH_MMCIF_CLK 48000000 +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 97500000 + /* Module stop status bits */ /* INTC-RT */ #define CONFIG_SMSTP0_ENA 0x00400000 diff --git a/include/configs/snowball.h b/include/configs/snowball.h index dacb5604cd..126201cf96 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -175,7 +175,6 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 diff --git a/include/configs/socfpga_arria5.h b/include/configs/socfpga_arria5.h new file mode 100644 index 0000000000..668a91e116 --- /dev/null +++ b/include/configs/socfpga_arria5.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_SOCFPGA_ARRIA5_H__ +#define __CONFIG_SOCFPGA_ARRIA5_H__ + +#include <asm/arch/socfpga_base_addrs.h> +#include "../../board/altera/socfpga/pinmux_config.h" +#include "../../board/altera/socfpga/iocsr_config.h" +#include "../../board/altera/socfpga/pll_config.h" + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#include <config_cmd_default.h> +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FPGA +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE + +#define CONFIG_REGEX /* Enable regular expression support */ + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET +#define CONFIG_BOOTCOMMAND "run ramboot" +#else +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#endif +#define CONFIG_LOADADDR 0x8000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_EMAC_BASE SOCFPGA_EMAC1_ADDRESS +#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII + +/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew" +#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0 +#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew" +#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0 + +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Altera" + +/* Extra Environment */ +#define CONFIG_HOSTNAME socfpga_arria5 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "bootimage=zImage\0" \ + "fdt_addr=100\0" \ + "fdtimage=socfpga.dtb\0" \ + "fsloadcmd=ext2load\0" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${mmcroot} rw rootwait;" \ + "bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:1 ${loadaddr} ${bootimage};" \ + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ + "qspiroot=/dev/mtdblock0\0" \ + "qspirootfstype=jffs2\0" \ + "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ + "bootm ${loadaddr} - ${fdt_addr}\0" + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#endif /* __CONFIG_SOCFPGA_ARRIA5_H__ */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index ee227fef0f..6d9347204b 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -19,8 +19,7 @@ * High level configuration */ #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_SYS_NO_FLASH #define CONFIG_CLOCKS diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index c3d958cb30..676144a668 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -21,6 +21,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DFU #define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE @@ -33,6 +34,8 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB +#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_REGEX /* Enable regular expression support */ @@ -66,6 +69,12 @@ #endif +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS +#endif +#define CONFIG_G_DNL_MANUFACTURER "Altera" + /* Extra Environment */ #define CONFIG_HOSTNAME socfpga_cyclone5 diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index a11f4ed2e1..16281f5ba8 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -11,6 +11,8 @@ * Common configurations used for both spear3xx as well as spear6xx */ +#define CONFIG_SYS_GENERIC_BOARD + /* U-boot Load Address */ #define CONFIG_SYS_TEXT_BASE 0x00700000 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index bd7d049277..1f7a1cb1f4 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -204,8 +204,6 @@ #define CONFIG_SYS_I2C_SOFT #define CONFIG_SYS_I2C_SOFT_SPEED 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 -#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ -#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ /* We use pin names in Kconfig and sunxi_name_to_gpio() */ #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl @@ -213,6 +211,11 @@ extern int soft_i2c_gpio_sda; extern int soft_i2c_gpio_scl; #endif +#define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ +#define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ +#else +#define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ +#define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ #endif #define CONFIG_CMD_I2C diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 9fbe68a8a2..38288f69aa 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -237,7 +237,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 7d2c0d2fa7..dd69d4ebab 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -346,7 +346,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40200800 #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK /* * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index c097b98575..7089378c96 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -165,6 +165,19 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE +#ifdef CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 0 +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "TBS" +#endif /* CONFIG_CMD_USB_MASS_STORAGE */ #define CONFIG_USB_KEYBOARD #ifdef CONFIG_USB_KEYBOARD #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index f10ca52ace..2cf1f68404 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -36,20 +36,19 @@ /* * Size of malloc() pool */ +#ifdef CONFIG_DFU_MMC +#define CONFIG_SYS_MALLOC_LEN ((4 << 20) + \ + CONFIG_SYS_DFU_DATA_BUF_SIZE) +#else #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ +#endif #define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */ /* * NS16550 Configuration */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#else #define CONFIG_TEGRA_SERIAL -#endif #define CONFIG_SYS_NS16550 /* diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index deb6bb2b8f..dcc2bdc7f6 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -171,7 +171,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000 #define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 87a4efcd5a..27a3dd1366 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -58,7 +58,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_CMD_ASKEN @@ -137,7 +136,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000 #define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 2bd116477c..110a4f8795 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -127,7 +127,11 @@ * we are on so we do not need to rely on the command prompt. We set a * console baudrate of 115200 and use the default baud rate table. */ -#define CONFIG_SYS_MALLOC_LEN (16 << 20) +#ifdef CONFIG_DFU_MMC +#define CONFIG_SYS_MALLOC_LEN ((16 << 20) + CONFIG_SYS_DFU_DATA_BUF_SIZE) +#else +#define CONFIG_SYS_MALLOC_LEN (16 << 20) +#endif #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "U-Boot# " #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -213,10 +217,9 @@ * SPLs). We have our BSS be placed 2MiB after this, to allow for the * default Linux kernel address of 0x80008000 to work with most sized * kernels, in the Falcon Mode case. We have the SPL malloc pool at the - * end of the BSS area. We place our stack at 32MiB after the start of - * DRAM to allow room for all of the above. + * end of the BSS area. We suggest that the stack be placed at 32MiB after + * the start of DRAM to allow room for all of the above (handled in Kconfig). */ -#define CONFIG_SPL_STACK (CONFIG_SYS_SDRAM_BASE + (32 << 20)) #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x80800000 #endif diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h deleted file mode 100644 index 00a1a9e002..0000000000 --- a/include/configs/tnetv107x_evm.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/sizes.h> -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> - -/* Architecture, CPU, etc */ -#define CONFIG_TNETV107X -#define CONFIG_TNETV107X_EVM -#define CONFIG_TNETV107X_WATCHDOG -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_DISABLE_TCM -#define CONFIG_PERIPORT_REMAP -#define CONFIG_PERIPORT_BASE 0x2000000 -#define CONFIG_PERIPORT_SIZE 0x10 -#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM) - -#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) - -#define CONFIG_PLL_SYS_EXT_FREQ 25000000 -#define CONFIG_PLL_TDM_EXT_FREQ 19200000 -#define CONFIG_PLL_ETH_EXT_FREQ 25000000 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) -#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE 0x04000000 -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Serial Driver Info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Flash and environment info */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (SZ_128K) -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_1BIT_ECC -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_JFFS2_NAND -#define CONFIG_ENV_OFFSET 0x180000 - -/* - * davinci_nand is a bit of a misnomer since this particular EMIF block is - * commonly used across multiple TI devices. Unfortunately, this misnomer - * (amongst others) carries forward into the kernel too. Consequently, if we - * use a different device name here, the mtdparts variable won't be usable as - * a kernel command-line argument. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1536k(uboot)ro," \ - "128k(params)ro," \ - "4m(kernel)," \ - "-(filesystem)" - -/* General U-Boot configuration */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_PROMPT "U-Boot > " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \ - 0x700000) -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \ - "root=/dev/mmcblk0p1 rw noinitrd" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_IMI -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 - -#endif /* __CONFIG_H */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 36621a553c..10ac4a46bc 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -354,7 +354,6 @@ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (57 * 1024) /* 7 KB for stack */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 9a6207048c..a6c7d5f136 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -14,6 +14,19 @@ #include <configs/bur_am335x_common.h> /* ------------------------------------------------------------------------- */ +#define CONFIG_AM335X_LCD +#define CONFIG_LCD +#define CONFIG_LCD_NOSTDOUT +#define CONFIG_SYS_WHITE_ON_BLACK +#define LCD_BPP LCD_COLOR32 + +#define CONFIG_HW_WATCHDOG +#define CONFIG_OMAP_WATCHDOG +#define CONFIG_SPL_WATCHDOG_SUPPORT +/* Bootcount using the RTC block */ +#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_AM33XX /* Clock Defines */ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) @@ -22,6 +35,8 @@ /* Support both device trees and ATAGs. */ #define CONFIG_OF_LIBFDT +#define CONFIG_USE_FDT /* use fdt within board code */ +#define CONFIG_OF_BOARD_SETUP #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -79,8 +94,8 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif /* CONFIG_NAND */ -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) +/* Always 64 KiB env size */ +#define CONFIG_ENV_SIZE (64 << 10) #ifdef CONFIG_NAND #define NANDARGS \ @@ -103,47 +118,83 @@ #ifdef CONFIG_MMC #define MMCARGS \ - "silent=1\0" +"dtbdev=mmc\0" \ +"dtbpart=0:1\0" \ +"logo0=ext4load mmc 0:3 ${loadaddr} /PPTLogo.bmp.gz && " \ + "bmp display ${loadaddr} 0 0\0" \ +"logo1=ext4load mmc 0:1 ${loadaddr} /PPTLogo.bmp.gz && " \ + "bmp display ${loadaddr} 0 0\0" \ +"mmcroot0=setenv bootargs ${optargs} console=${console}\0" \ +"mmcroot1=setenv bootargs ${optargs} console=${console} root=/dev/mmcblk0p2 " \ + "rootfstype=ext4\0" \ +"mmcboot0=echo booting Updatesystem from mmc (ext4-fs) ...; " \ + "ext4load mmc 0:1 ${loadaddr} /${kernel}; " \ + "ext4load mmc 0:1 ${ramaddr} /${ramdisk}; " \ + "run mmcroot0; bootz ${loadaddr} ${ramaddr} ${dtbaddr};\0" \ +"mmcboot1=echo booting PPT-OS from mmc (ext4-fs) ...; " \ + "ext4load mmc 0:2 ${loadaddr} /boot/${kernel}; " \ + "run mmcroot1; bootz ${loadaddr} - ${dtbaddr};\0" \ +"defboot=run logo0 || run logo1; " \ + "ext4load mmc 0:2 ${loadaddr} /boot/PPTImage.md5 && run mmcboot1; " \ + "ext4load mmc 0:1 ${dtbaddr} /$dtb && run mmcboot0; " \ + "run ramboot; run usbupdate;\0" \ +"bootlimit=1\0" \ +"altbootcmd=run logo0 || run logo1; " \ + "run mmcboot0;\0" \ +"upduboot=dhcp; " \ + "tftp ${loadaddr} MLO && mmc write ${loadaddr} 100 100; " \ + "tftp ${loadaddr} u-boot.img && mmc write ${loadaddr} 300 400;\0" #else #define MMCARGS "" #endif /* CONFIG_MMC */ #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=0\0" \ - "loadaddr=0x80200000\0" \ - "bootfile=zImage\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "rootpath=/tftpboot/tseries/rootfs-small\0" \ - "nfsopts=nolock\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "run netargs; " \ - "bootm ${loadaddr}\0" \ - "usbupdate=echo Updating UBOOT from USB-Stick ...; " \ - "usb start; " \ - "fatload usb 0 0x80000000 updateubootusb.img; " \ - "source;\0" \ - "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ - "setenv autoload 0; " \ - "dhcp;" \ - "tftp 0x80000000 updateUBOOT.img;" \ - "source;\0" \ - NANDARGS \ - MMCARGS +BUR_COMMON_ENV \ +"verify=no\0" \ +"autoload=0\0" \ +"dtb=bur-ppt-ts30.dtb\0" \ +"dtbaddr=0x80100000\0" \ +"loadaddr=0x80200000\0" \ +"ramaddr=0x80A00000\0" \ +"kernel=zImage\0" \ +"ramdisk=rootfs.cpio.uboot\0" \ +"console=ttyO0,115200n8\0" \ +"optargs=consoleblank=0 quiet lpj=1191936 panic=2\0" \ +"nfsroot=/tftpboot/tseries/rootfs-small\0" \ +"nfsopts=nolock\0" \ +"ramargs=setenv bootargs ${optargs} console=${console} root=/dev/ram0\0" \ +"netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${nfsroot},${nfsopts} rw " \ + "ip=dhcp\0" \ +"netboot=echo Booting from network ...; " \ + "dhcp; " \ + "tftp ${loadaddr} ${kernel}; " \ + "tftp ${dtbaddr} ${dtb}; " \ + "run netargs; " \ + "bootz ${loadaddr} - ${dtbaddr}\0" \ +"ramboot=echo Booting from network into RAM ...; "\ + "if dhcp; then; " \ + "tftp ${loadaddr} ${kernel}; " \ + "tftp ${ramaddr} ${ramdisk}; " \ + "if ext4load ${dtbdev} ${dtbpart} ${dtbaddr} /${dtb}; " \ + "then; else tftp ${dtbaddr} ${dtb}; fi;" \ + "run mmcroot0; " \ + "bootz ${loadaddr} ${ramaddr} ${dtbaddr}; fi;\0" \ +"usbupdate=echo Updating UBOOT from USB-Stick ...; " \ + "usb start && fatload usb 0 0x80000000 updateubootusb.img && source\0" \ +"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ + "setenv autoload 0; " \ + "dhcp && tftp 0x80000000 updateUBOOT.img && source;\0" \ +NANDARGS \ +MMCARGS #endif /* !CONFIG_SPL_BUILD*/ #define CONFIG_BOOTCOMMAND \ - "run mmcboot1;" -#define CONFIG_BOOTDELAY 1 /* TODO: für release auf 0 setzen */ + "run defboot;" +#define CONFIG_BOOTDELAY 0 #ifdef CONFIG_NAND /* @@ -260,6 +311,10 @@ #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE +#define CONFIG_FS_EXT4 +#define CONFIG_EXT4_WRITE +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE #define CONFIG_CMD_FS_GENERIC #endif /* CONFIG_MMC, ... */ diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 8d7970a376..5302b1fb81 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -131,7 +131,6 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ #define CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 3f738fb642..df89d14cc3 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -88,6 +88,8 @@ /* #define CONFIG_SYS_ICACHE_OFF */ /* #define CONFIG_SYS_DCACHE_OFF */ +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* Comment out the following to enable L2 cache */ #define CONFIG_UNIPHIER_L2CACHE_ON @@ -186,6 +188,7 @@ /* USB */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 #define CONFIG_CMD_FAT #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 7fb28a54ba..810eef12de 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -29,8 +29,6 @@ /*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ -#define CONFIG_SYS_NO_FLASH - #define CONFIG_SUPPORT_RAW_INITRD /* Cache Definitions */ @@ -56,14 +54,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT - -/* SMP Spin Table Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) -#else -#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#endif - /* CS register bases for the original memory map. */ #define V2M_PA_CS0 0x00000000 #define V2M_PA_CS1 0x14000000 @@ -79,13 +69,6 @@ #define V2M_BASE 0x80000000 -/* - * Physical addresses, offset from V2M_PA_CS0-3 - */ -#define V2M_NOR0 (V2M_PA_CS0) -#define V2M_NOR1 (V2M_PA_CS4) -#define V2M_SRAM (V2M_PA_CS1) - /* Common peripherals relative to CS7. */ #define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) #define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) @@ -146,9 +129,17 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 << 20)) -/* SMSC91C111 Ethernet Configuration */ +/* Ethernet Configuration */ +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +/* The real hardware Versatile express uses SMSC9118 */ +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_BASE (0x018000000) +#else +/* The Vexpress64 simulators use SMSC91C111 */ #define CONFIG_SMC91111 1 #define CONFIG_SMC91111_BASE (0x01A000000) +#endif /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL @@ -175,7 +166,6 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PXE #define CONFIG_CMD_ENV -#define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_LOADB #define CONFIG_CMD_MEMORY @@ -237,7 +227,7 @@ "fdt_addr_r=0x83000000\0" \ "fdt_high=0xa0000000\0" -#define CONFIG_BOOTARGS "console=ttyAMA0 root=/dev/ram0" +#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/ram0" #define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ "$initrd_addr_r:$initrd_size $fdt_addr_r" #define CONFIG_BOOTDELAY -1 @@ -258,4 +248,27 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64 /* max command args */ +/* Flash memory is available on the Juno board only */ +#ifndef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_NO_FLASH +#else +#define CONFIG_CMD_FLASH +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MiB */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +/* Timeout values in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ + +/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ +#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ + +#endif + #endif /* __VEXPRESS_AEMV8A_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 2dea921045..989e755279 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -188,7 +188,6 @@ #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 /* Miscellaneous configurable options */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) #define CONFIG_BOOTDELAY 2 diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 2fb91a8f8c..887433b16f 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -221,7 +221,7 @@ #else /* No flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif /* @@ -297,7 +297,6 @@ #define CONFIG_SYS_MDMRS_VAL 0x00000000 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 -#define CONFIG_SYS_MEM_BUF_IMP 0x0f /* * PCMCIA and CF Interfaces diff --git a/include/configs/warp.h b/include/configs/warp.h new file mode 100644 index 0000000000..bcdd1125f9 --- /dev/null +++ b/include/configs/warp.h @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2014 O.S. Systems Software LTDA. + * Copyright (C) 2014 Kynetics LLC. + * Copyright (C) 2014 Revolution Robotics, Inc. + * + * Author: Otavio Salvador <otavio@ossystems.com.br> + * + * Configuration settings for the WaRP Board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> +#include "mx6_common.h" + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +/* Command definition */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x82000000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Watchdog */ +#define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_512M + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 + +/* VDD voltage 1.65 - 1.95 */ +#define CONFIG_SYS_SD_VOLTAGE 0x00000080 + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +/* USB Configs */ +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ +#endif + +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "image=zImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6sl-warp.dtb\0" \ + "fdt_addr=0x88000000\0" \ + "initrd_addr=0x83800000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ + "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootz; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootz; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +#endif /* __CONFIG_H */ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index c7a17f7a49..48b869268b 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -21,6 +21,7 @@ #define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_GENERIC_BOARD /* Only in case the value is not present in mach-types.h */ #ifndef MACH_TYPE_FLEA3 @@ -146,8 +147,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/x600.h b/include/configs/x600.h index 04187c0a31..241bf65f30 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -16,6 +16,7 @@ */ #define CONFIG_SPEAR600 /* SPEAr600 SoC */ #define CONFIG_X600 /* on X600 board */ +#define CONFIG_SYS_GENERIC_BOARD #include <asm/arch/hardware.h> diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h new file mode 100644 index 0000000000..511ecca0b8 --- /dev/null +++ b/include/configs/xilinx_zynqmp.h @@ -0,0 +1,131 @@ +/* + * Configuration for Xilinx ZynqMP + * (C) Copyright 2014 - 2015 Xilinx, Inc. + * Michal Simek <michal.simek@xilinx.com> + * + * Based on Configuration for Versatile Express + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __XILINX_ZYNQMP_H +#define __XILINX_ZYNQMP_H + +#define CONFIG_REMAKE_ELF + +/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_GENERIC_BOARD + +/* Generic Interrupt Controller Definitions */ +#define CONFIG_GICV2 +#define GICD_BASE 0xF9010000 +#define GICC_BASE 0xF9020000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE + +/* Have release address at the end of 256MB for now */ +#define CPU_RELEASE_ADDR 0xFFFFFF0 + +/* Cache Definitions */ +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_IDENT_STRING " Xilinx ZynqMP" + +#define CONFIG_SYS_TEXT_BASE 0x8000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT + +/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ +#define COUNTER_FREQUENCY 4000000 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x400000) + +/* Serial setup */ +#define CONFIG_ZYNQ_SERIAL_UART0 +#define CONFIG_ZYNQ_SERIAL + +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE \ + { 4800, 9600, 19200, 38400, 57600, 115200 } + +/* Command line configuration */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MEMORY +#define CONFIG_DOS_PARTITION + +#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +# define CONFIG_MMC +# define CONFIG_GENERIC_MMC +# define CONFIG_SDHCI +# define CONFIG_ZYNQ_SDHCI +# define CONFIG_CMD_MMC +#endif + +#if defined(CONFIG_ZYNQ_SDHCI) +# define CONFIG_FAT_WRITE +# define CONFIG_CMD_EXT4_WRITE +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR 0x8000000 + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr=0x80000\0" \ + "fdt_addr=0x7000000\0" \ + "fdt_high=0x10000000\0" \ + "sdboot=mmcinfo && fatload mmc 0:0 $fdt_addr system.dtb && " \ + "fatload mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" + +#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \ + "earlycon=cdns,mmio,0xff000000,${baudrate}n8" +#define CONFIG_PREBOOT "run bootargs" +#define CONFIG_BOOTCOMMAND "run $modeboot" +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_BOARD_LATE_INIT + +/* Do not preserve environment */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x1000 + +/* Monitor Command Prompt */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_PROMPT "ZynqMP> " +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_MAXARGS 64 + +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) + +#define CONFIG_CMD_BOOTI +#define CONFIG_CMD_UNZIP + +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_CLOCKS + +#endif /* __XILINX_ZYNQMP_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index fe331bc082..1dbbc15256 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -136,7 +136,6 @@ unsigned char zipitz2_spi_read(void); /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ /* diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 356ac886f2..342fa2c40a 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -15,6 +15,8 @@ #define CONFIG_MX25 #define CONFIG_SYS_TEXT_BASE 0xA0000000 +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_TIMER_RATE 32768 #define CONFIG_SYS_TIMER_COUNTER \ (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 864528a5ea..485babd824 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -255,7 +255,7 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) -#define CONFIG_SYS_MALLOC_LEN 0xC00000 +#define CONFIG_SYS_MALLOC_LEN 0x1400000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ diff --git a/include/dfu.h b/include/dfu.h index c27856cb72..7d31abdf33 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -140,6 +140,9 @@ struct dfu_entity { unsigned int inited:1; }; +#ifdef CONFIG_SET_DFU_ALT_INFO +void set_dfu_alt_info(char *interface, char *devstr); +#endif int dfu_config_entities(char *s, char *interface, char *devstr); void dfu_free_entities(void); void dfu_show_entities(void); diff --git a/include/e500.h b/include/e500.h index 5884a224d2..255f46bf1e 100644 --- a/include/e500.h +++ b/include/e500.h @@ -11,6 +11,9 @@ typedef struct { unsigned long freq_processor[CONFIG_MAX_CPUS]; +#ifdef CONFIG_HETROGENOUS_CLUSTERS + unsigned long freq_processor_dsp[CONFIG_MAX_DSP_CPUS]; +#endif unsigned long freq_systembus; unsigned long freq_ddrbus; unsigned long freq_localbus; @@ -24,6 +27,14 @@ typedef struct #ifdef CONFIG_SYS_DPAA_PME unsigned long freq_pme; #endif +#ifdef CONFIG_SYS_CPRI + unsigned long freq_cpri; +#endif +#ifdef CONFIG_SYS_MAPLE + unsigned long freq_maple; + unsigned long freq_maple_ulb; + unsigned long freq_maple_etvpe; +#endif #ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK unsigned char diff_sysclk; #endif diff --git a/include/exports.h b/include/exports.h index 205affe72d..1a01e430bb 100644 --- a/include/exports.h +++ b/include/exports.h @@ -15,7 +15,9 @@ int printf(const char* fmt, ...); void install_hdlr(int, interrupt_handler_t, void*); void free_hdlr(int); void *malloc(size_t); +#ifndef CONFIG_SYS_MALLOC_SIMPLE void free(void*); +#endif void __udelay(unsigned long); unsigned long get_timer(unsigned long); int vprintf(const char *, va_list); diff --git a/include/fb_mmc.h b/include/fb_mmc.h index 1ad1d1327d..402ba9b1b4 100644 --- a/include/fb_mmc.h +++ b/include/fb_mmc.h @@ -6,3 +6,4 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer, unsigned int download_bytes, char *response); +void fb_mmc_erase(const char *cmd, char *response); diff --git a/include/fdtdec.h b/include/fdtdec.h index 1bc70dba21..1233dfb280 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -168,6 +168,7 @@ enum fdt_compat_id { COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */ COMPAT_INTEL_ICH_SPI, /* Intel ICH7/9 SPI controller */ COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */ + COMPAT_PANASONIC_XHCI, /* Panasonic UniPhier xHCI */ COMPAT_COUNT, }; diff --git a/include/fsl-mc/fsl_dpmng.h b/include/fsl-mc/fsl_dpmng.h new file mode 100644 index 0000000000..c2e1ddd18b --- /dev/null +++ b/include/fsl-mc/fsl_dpmng.h @@ -0,0 +1,121 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/*! + * @file fsl_dpmng.h + * @brief Management Complex General API + */ + +#ifndef __FSL_DPMNG_H +#define __FSL_DPMNG_H + +/*! + * @Group grp_dpmng Management Complex General API + * + * @brief Contains general API for the Management Complex firmware + * @{ + */ + +struct fsl_mc_io; + +/** + * @brief Management Complex firmware version information + */ +#define MC_VER_MAJOR 4 +#define MC_VER_MINOR 0 + +struct mc_version { + uint32_t major; + /*!< Major version number: incremented on API compatibility changes */ + uint32_t minor; + /*!< Minor version number: incremented on API additions (that are + * backward compatible); reset when major version is incremented + */ + uint32_t revision; + /*!< Internal revision number: incremented on implementation changes + * and/or bug fixes that have no impact on API + */ +}; + +/** + * @brief Retrieves the Management Complex firmware version information + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[out] mc_ver_info Pointer to version information structure + * + * @returns '0' on Success; Error code otherwise. + */ +int mc_get_version(struct fsl_mc_io *mc_io, struct mc_version *mc_ver_info); + +/** + * @brief Resets an AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id); + +/** + * @brief Loads an image to AIOP tile + * + * @param[in] mc_io Pointer to opaque I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] img_iova I/O virtual address of AIOP ELF image + * @param[in] img_size Size of AIOP ELF image in memory (in bytes) + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_load_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + uint64_t img_iova, + uint32_t img_size); + +/** + * @brief AIOP run configuration + */ +struct dpmng_aiop_run_cfg { + uint32_t cores_mask; + /*!< Mask of AIOP cores to run (core 0 in most significant bit) */ + uint64_t options; + /*!< Execution options (currently none defined) */ +}; + +/** + * @brief Starts AIOP tile execution + * + * @param[in] mc_io Pointer to MC portal's I/O object + * @param[in] container_id AIOP container ID + * @param[in] aiop_tile_id AIOP tile ID to reset + * @param[in] cfg AIOP run configuration + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_run_aiop(struct fsl_mc_io *mc_io, + int container_id, + int aiop_tile_id, + const struct dpmng_aiop_run_cfg *cfg); + +/** + * @brief Resets MC portal + * + * This function closes all object handles (tokens) that are currently + * open in the MC portal on which the command is submitted. This allows + * cleanup of stale handles that belong to non-functional user processes. + * + * @param[in] mc_io Pointer to MC portal's I/O object + * + * @returns '0' on Success; Error code otherwise. + */ +int dpmng_reset_mc_portal(struct fsl_mc_io *mc_io); + +/** @} */ + +#endif /* __FSL_DPMNG_H */ diff --git a/include/fsl_mc.h b/include/fsl-mc/fsl_mc.h index b9f089e5f3..b9f089e5f3 100644 --- a/include/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h diff --git a/include/fsl-mc/fsl_mc_cmd.h b/include/fsl-mc/fsl_mc_cmd.h new file mode 100644 index 0000000000..e7fcb5b142 --- /dev/null +++ b/include/fsl-mc/fsl_mc_cmd.h @@ -0,0 +1,132 @@ +/* Copyright 2014 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __FSL_MC_CMD_H +#define __FSL_MC_CMD_H + +#define MC_CMD_NUM_OF_PARAMS 7 + +#define MAKE_UMASK64(_width) \ + ((uint64_t)((_width) < 64 ? ((uint64_t)1 << (_width)) - 1 : -1)) + +static inline uint64_t u64_enc(int lsoffset, int width, uint64_t val) +{ + return (uint64_t)(((uint64_t)val & MAKE_UMASK64(width)) << lsoffset); +} +static inline uint64_t u64_dec(uint64_t val, int lsoffset, int width) +{ + return (uint64_t)((val >> lsoffset) & MAKE_UMASK64(width)); +} + +struct mc_command { + uint64_t header; + uint64_t params[MC_CMD_NUM_OF_PARAMS]; +}; + +enum mc_cmd_status { + MC_CMD_STATUS_OK = 0x0, /*!< Completed successfully */ + MC_CMD_STATUS_READY = 0x1, /*!< Ready to be processed */ + MC_CMD_STATUS_AUTH_ERR = 0x3, /*!< Authentication error */ + MC_CMD_STATUS_NO_PRIVILEGE = 0x4, /*!< No privilege */ + MC_CMD_STATUS_DMA_ERR = 0x5, /*!< DMA or I/O error */ + MC_CMD_STATUS_CONFIG_ERR = 0x6, /*!< Configuration error */ + MC_CMD_STATUS_TIMEOUT = 0x7, /*!< Operation timed out */ + MC_CMD_STATUS_NO_RESOURCE = 0x8, /*!< No resources */ + MC_CMD_STATUS_NO_MEMORY = 0x9, /*!< No memory available */ + MC_CMD_STATUS_BUSY = 0xA, /*!< Device is busy */ + MC_CMD_STATUS_UNSUPPORTED_OP = 0xB, /*!< Unsupported operation */ + MC_CMD_STATUS_INVALID_STATE = 0xC /*!< Invalid state */ +}; + +#define MC_CMD_HDR_CMDID_O 52 /* Command ID field offset */ +#define MC_CMD_HDR_CMDID_S 12 /* Command ID field size */ +#define MC_CMD_HDR_AUTHID_O 38 /* Authentication ID field offset */ +#define MC_CMD_HDR_AUTHID_S 10 /* Authentication ID field size */ +#define MC_CMD_HDR_STATUS_O 16 /* Status field offset */ +#define MC_CMD_HDR_STATUS_S 8 /* Status field size*/ +#define MC_CMD_HDR_PRI_O 15 /* Priority field offset */ +#define MC_CMD_HDR_PRI_S 1 /* Priority field size */ + +#define MC_CMD_HDR_READ_STATUS(_hdr) \ + ((enum mc_cmd_status)u64_dec((_hdr), \ + MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S)) + +#define MC_CMD_HDR_READ_AUTHID(_hdr) \ + ((uint16_t)u64_dec((_hdr), MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S)) + +#define MC_CMD_PRI_LOW 0 /*!< Low Priority command indication */ +#define MC_CMD_PRI_HIGH 1 /*!< High Priority command indication */ + +#define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \ + ((_cmd).params[_param] |= u64_enc((_offset), (_width), _arg)) + +#define MC_RSP_OP(_cmd, _param, _offset, _width, _type, _arg) \ + (_arg = (_type)u64_dec(_cmd.params[_param], (_offset), (_width))) + +static inline uint64_t mc_encode_cmd_header(uint16_t cmd_id, + uint8_t priority, + uint16_t auth_id) +{ + uint64_t hdr; + + hdr = u64_enc(MC_CMD_HDR_CMDID_O, MC_CMD_HDR_CMDID_S, cmd_id); + hdr |= u64_enc(MC_CMD_HDR_AUTHID_O, MC_CMD_HDR_AUTHID_S, auth_id); + hdr |= u64_enc(MC_CMD_HDR_PRI_O, MC_CMD_HDR_PRI_S, priority); + hdr |= u64_enc(MC_CMD_HDR_STATUS_O, MC_CMD_HDR_STATUS_S, + MC_CMD_STATUS_READY); + + return hdr; +} + +/** + * mc_write_command - writes a command to a Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @cmd: pointer to a filled command + */ +static inline void mc_write_command(struct mc_command __iomem *portal, + struct mc_command *cmd) +{ + int i; + + /* copy command parameters into the portal */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + writeq(cmd->params[i], &portal->params[i]); + + /* submit the command by writing the header */ + writeq(cmd->header, &portal->header); +} + +/** + * mc_read_response - reads the response for the last MC command from a + * Management Complex (MC) portal + * + * @portal: pointer to an MC portal + * @resp: pointer to command response buffer + * + * Returns MC_CMD_STATUS_OK on Success; Error code otherwise. + */ +static inline enum mc_cmd_status mc_read_response( + struct mc_command __iomem *portal, + struct mc_command *resp) +{ + int i; + enum mc_cmd_status status; + + /* Copy command response header from MC portal: */ + resp->header = readq(&portal->header); + status = MC_CMD_HDR_READ_STATUS(resp->header); + if (status != MC_CMD_STATUS_OK) + return status; + + /* Copy command response data from MC portal: */ + for (i = 0; i < MC_CMD_NUM_OF_PARAMS; i++) + resp->params[i] = readq(&portal->params[i]); + + return status; +} + +int mc_send_command(struct fsl_mc_io *mc_io, struct mc_command *cmd); + +#endif /* __FSL_MC_CMD_H */ diff --git a/include/fsl-mc/fsl_mc_sys.h b/include/fsl-mc/fsl_mc_sys.h new file mode 100644 index 0000000000..c0befe01d2 --- /dev/null +++ b/include/fsl-mc/fsl_mc_sys.h @@ -0,0 +1,26 @@ +/* + * Freescale Layerscape Management Complex (MC) Environment-specific code + * + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_MC_SYS_H +#define _FSL_MC_SYS_H + +#include <asm/io.h> + +struct mc_command; + +/* + * struct mc_portal_wrapper - MC command portal wrapper object + */ +struct fsl_mc_io { + struct mc_command __iomem *mmio_regs; +}; + +int mc_send_command(struct fsl_mc_io *mc_io, + struct mc_command *cmd); + +#endif /* _FSL_MC_SYS_H */ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 3286c95907..feccef9c9c 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -44,11 +44,12 @@ u32 fsl_ddr_get_version(void); * to this specific DDR technology. */ static __inline__ int -compute_dimm_parameters(const generic_spd_eeprom_t *spd, +compute_dimm_parameters(const unsigned int ctrl_num, + const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number) { - return ddr_compute_dimm_parameters(spd, pdimm, dimm_number); + return ddr_compute_dimm_parameters(ctrl_num, spd, pdimm, dimm_number); } #endif @@ -92,13 +93,15 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only); const char *step_to_string(unsigned int step); -unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts, +unsigned int compute_fsl_memctl_config_regs(const unsigned int ctrl_num, + const memctl_options_t *popts, fsl_ddr_cfg_regs_t *ddr, const common_timing_params_t *common_dimm, const dimm_params_t *dimm_parameters, unsigned int dbw_capacity_adjust, unsigned int size_only); unsigned int compute_lowest_common_dimm_parameters( + const unsigned int ctrl_num, const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms); @@ -108,13 +111,15 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int ctrl_num); void check_interleaving_options(fsl_ddr_info_t *pinfo); -unsigned int mclk_to_picos(unsigned int mclk); -unsigned int get_memory_clk_period_ps(void); -unsigned int picos_to_mclk(unsigned int picos); +unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk); +unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num); +unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos); void fsl_ddr_set_lawbar( const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); +void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl, + unsigned int last_ctrl); int fsl_ddr_interactive_env_var_exists(void); unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set); diff --git a/include/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h index 09a67a6802..751e935117 100644 --- a/include/fsl_ddr_dimm_params.h +++ b/include/fsl_ddr_dimm_params.h @@ -112,7 +112,7 @@ typedef struct dimm_params_s { #endif } dimm_params_t; -extern unsigned int ddr_compute_dimm_parameters( +unsigned int ddr_compute_dimm_parameters(const unsigned int ctrl_num, const generic_spd_eeprom_t *spd, dimm_params_t *pdimm, unsigned int dimm_number); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index c1b6648591..57295b4bc0 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -108,6 +108,7 @@ #define XFERTYP_RSPTYP_48_BUSY 0x00030000 #define XFERTYP_MSBSEL 0x00000020 #define XFERTYP_DTDSEL 0x00000010 +#define XFERTYP_DDREN 0x00000008 #define XFERTYP_AC12EN 0x00000004 #define XFERTYP_BCEN 0x00000002 #define XFERTYP_DMAEN 0x00000001 @@ -154,6 +155,8 @@ #define ESDHC_HOSTCAPBLT_DMAS 0x00400000 #define ESDHC_HOSTCAPBLT_HSS 0x00200000 +#define ESDHC_VENDORSPEC_VSELECT 0x00000002 /* Use 1.8V */ + struct fsl_esdhc_cfg { u32 esdhc_base; u32 sdhc_clk; diff --git a/include/fsl_sec.h b/include/fsl_sec.h index aa850a3bf1..ebb1ac6d40 100644 --- a/include/fsl_sec.h +++ b/include/fsl_sec.h @@ -135,7 +135,7 @@ typedef struct ccsr_sec { #define CONFIG_JRSTARTR_JR0 0x00000001 struct jr_regs { -#ifdef CONFIG_SYS_FSL_SEC_LE +#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6) u32 irba_l; u32 irba_h; #else @@ -148,7 +148,7 @@ struct jr_regs { u32 irsa; u32 rsvd3; u32 irja; -#ifdef CONFIG_SYS_FSL_SEC_LE +#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6) u32 orba_l; u32 orba_h; #else @@ -175,7 +175,105 @@ struct jr_regs { u32 jrcr; }; +/* + * Scatter Gather Entry - Specifies the the Scatter Gather Format + * related information + */ +struct sg_entry { +#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6) + uint32_t addr_lo; /* Memory Address - lo */ + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint16_t reserved_zero; +#else + uint16_t reserved_zero; + uint16_t addr_hi; /* Memory Address of start of buffer - hi */ + uint32_t addr_lo; /* Memory Address - lo */ +#endif + + uint32_t len_flag; /* Length of the data in the frame */ +#define SG_ENTRY_LENGTH_MASK 0x3FFFFFFF +#define SG_ENTRY_EXTENSION_BIT 0x80000000 +#define SG_ENTRY_FINAL_BIT 0x40000000 + uint32_t bpid_offset; +#define SG_ENTRY_BPID_MASK 0x00FF0000 +#define SG_ENTRY_BPID_SHIFT 16 +#define SG_ENTRY_OFFSET_MASK 0x00001FFF +#define SG_ENTRY_OFFSET_SHIFT 0 +}; + +#ifdef CONFIG_MX6 +/* CAAM Job Ring 0 Registers */ +/* Secure Memory Partition Owner register */ +#define SMCSJR_PO (3 << 6) +/* JR Allocation Error */ +#define SMCSJR_AERR (3 << 12) +/* Secure memory partition 0 page 0 owner register */ +#define CAAM_SMPO_0 CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC +/* Secure memory command register */ +#define CAAM_SMCJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10f4 +/* Secure memory command status register */ +#define CAAM_SMCSJR0 CONFIG_SYS_FSL_SEC_ADDR + 0x10fc +/* Secure memory access permissions register */ +#define CAAM_SMAPJR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16) +/* Secure memory access group 2 register */ +#define CAAM_SMAG2JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16) +/* Secure memory access group 1 register */ +#define CAAM_SMAG1JR0(y) (CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16) + +/* Commands and macros for secure memory */ +#define CMD_PAGE_ALLOC 0x1 +#define CMD_PAGE_DEALLOC 0x2 +#define CMD_PART_DEALLOC 0x3 +#define CMD_INQUIRY 0x5 +#define CMD_COMPLETE (3 << 14) +#define PAGE_AVAILABLE 0 +#define PAGE_OWNED (3 << 6) +#define PAGE(x) (x << 16) +#define PARTITION(x) (x << 8) +#define PARTITION_OWNER(x) (0x3 << (x*2)) + +/* Address of secure 4kbyte pages */ +#define SEC_MEM_PAGE0 CAAM_ARB_BASE_ADDR +#define SEC_MEM_PAGE1 (CAAM_ARB_BASE_ADDR + 0x1000) +#define SEC_MEM_PAGE2 (CAAM_ARB_BASE_ADDR + 0x2000) +#define SEC_MEM_PAGE3 (CAAM_ARB_BASE_ADDR + 0x3000) + +#define JR_MID 2 /* Matches ROM configuration */ +#define KS_G1 (1 << JR_MID) /* CAAM only */ +#define PERM 0x0000B008 /* Clear on release, lock SMAP + * lock SMAG group 1 Blob */ + +#define BLOB_SIZE(x) (x + 32 + 16) /* Blob buffer size */ + +/* HAB WRAPPED KEY header */ +#define WRP_HDR_SIZE 0x08 +#define HDR_TAG 0x81 +#define HDR_PAR 0x41 +/* HAB WRAPPED KEY Data */ +#define HAB_MOD 0x66 +#define HAB_ALG 0x55 +#define HAB_FLG 0x00 + +/* Partition and Page IDs */ +#define PARTITION_1 1 +#define PAGE_1 1 + +#define ERROR_IN_PAGE_ALLOC 1 +#define ECONSTRJDESC -1 + +#endif + int sec_init(void); + +/* blob_dek: + * Encapsulates the src in a secure blob and stores it dst + * @src: reference to the plaintext + * @dst: reference to the output adrress + * @len: size in bytes of src + * @return: 0 on success, error otherwise + */ +int blob_dek(const u8 *src, u8 *dst, u8 len); + #endif #endif /* __FSL_SEC_H */ diff --git a/include/fsl_sec_mon.h b/include/fsl_sec_mon.h new file mode 100644 index 0000000000..b6794cefcc --- /dev/null +++ b/include/fsl_sec_mon.h @@ -0,0 +1,58 @@ +/* + * Common internal memory map for some Freescale SoCs + * + * Copyright 2015 Freescale Semiconductor, Inc. + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_SEC_MON_H +#define __FSL_SEC_MON_H + +#include <common.h> +#include <asm/io.h> + +#ifdef CONFIG_SYS_FSL_SEC_MON_LE +#define sec_mon_in32(a) in_le32(a) +#define sec_mon_out32(a, v) out_le32(a, v) +#define sec_mon_in16(a) in_le16(a) +#define sec_mon_clrbits32 clrbits_le32 +#define sec_mon_setbits32 setbits_le32 +#elif defined(CONFIG_SYS_FSL_SEC_MON_BE) +#define sec_mon_in32(a) in_be32(a) +#define sec_mon_out32(a, v) out_be32(a, v) +#define sec_mon_in16(a) in_be16(a) +#define sec_mon_clrbits32 clrbits_be32 +#define sec_mon_setbits32 setbits_be32 +#else +#error Neither CONFIG_SYS_FSL_SEC_MON_LE nor CONFIG_SYS_FSL_SEC_MON_BE defined +#endif + +struct ccsr_sec_mon_regs { + u8 reserved0[0x04]; + u32 hp_com; /* 0x04 SEC_MON_HP Command Register */ + u8 reserved2[0x0c]; + u32 hp_stat; /* 0x08 SEC_MON_HP Status Register */ +}; + +#define HPCOMR_SW_SV 0x100 /* Security Violation bit */ +#define HPCOMR_SW_FSV 0x200 /* Fatal Security Violation bit */ +#define HPCOMR_SSM_ST 0x1 /* SSM_ST field in SEC_MON command */ +#define HPSR_SSM_ST_CHECK 0x900 /* SEC_MON is in check state */ +#define HPSR_SSM_ST_NON_SECURE 0xb00 /* SEC_MON is in non secure state */ +#define HPSR_SSM_ST_TRUST 0xd00 /* SEC_MON is in trusted state */ +#define HPSR_SSM_ST_SOFT_FAIL 0x300 /* SEC_MON is in soft fail state */ +#define HPSR_SSM_ST_MASK 0xf00 /* Mask for SSM_ST field */ + +/* + * SEC_MON read. This specifies the possible reads + * from the SEC_MON + */ +enum { + SEC_MON_SSM_ST, + SEC_MON_SW_FSV, + SEC_MON_SW_SV, +}; + +int change_sec_mon_state(uint32_t initial_state, uint32_t final_state); + +#endif /* __FSL_SEC_MON_H */ diff --git a/include/fsl_secboot_err.h b/include/fsl_secboot_err.h new file mode 100644 index 0000000000..afc50a80ca --- /dev/null +++ b/include/fsl_secboot_err.h @@ -0,0 +1,128 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_SECBOOT_ERR_H +#define _FSL_SECBOOT_ERR_H + +#define ERROR_ESBC_PAMU_INIT 0x100000 +#define ERROR_ESBC_SEC_RESET 0x200000 +#define ERROR_ESBC_SEC_INIT 0x400000 +#define ERROR_ESBC_SEC_DEQ 0x800000 +#define ERROR_ESBC_SEC_DEQ_TO 0x1000000 +#define ERROR_ESBC_SEC_ENQ 0x2000000 +#define ERROR_ESBC_SEC_JOBQ_STATUS 0x4000000 +#define ERROR_ESBC_CLIENT_CPUID_NO_MATCH 0x1 +#define ERROR_ESBC_CLIENT_HDR_LOC 0x2 +#define ERROR_ESBC_CLIENT_HEADER_BARKER 0x4 +#define ERROR_ESBC_CLIENT_HEADER_KEY_LEN 0x8 +#define ERROR_ESBC_CLIENT_HEADER_SIG_LEN 0x10 +#define ERROR_ESBC_CLIENT_HEADER_KEY_REVOKED 0x11 +#define ERROR_ESBC_CLIENT_HEADER_INVALID_SRK_NUM_ENTRY 0x12 +#define ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM 0x13 +#define ERROR_ESBC_CLIENT_HEADER_INV_SRK_ENTRY_KEYLEN 0x14 +#define ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED 0x15 +#define ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY 0x16 +#define ERROR_ESBC_CLIENT_HEADER_INVALID_IE_KEY_NUM 0x17 +#define ERROR_ESBC_CLIENT_HEADER_INV_IE_ENTRY_KEYLEN 0x18 +#define ERROR_IE_TABLE_NOT_FOUND 0x19 +#define ERROR_ESBC_CLIENT_HEADER_KEY_LEN_NOT_TWICE_SIG_LEN 0x20 +#define ERROR_ESBC_CLIENT_HEADER_KEY_MOD_1 0x40 +#define ERROR_ESBC_CLIENT_HEADER_KEY_MOD_2 0x80 +#define ERROR_ESBC_CLIENT_HEADER_SIG_KEY_MOD 0x100 +#define ERROR_ESBC_CLIENT_HEADER_SG_ESBC_EP 0x200 +#define ERROR_ESBC_CLIENT_HASH_COMPARE_KEY 0x400 +#define ERROR_ESBC_CLIENT_HASH_COMPARE_EM 0x800 +#define ERROR_ESBC_CLIENT_SSM_TRUSTSTS 0x1000 +#define ERROR_ESBC_CLIENT_BAD_ADDRESS 0x2000 +#define ERROR_ESBC_CLIENT_MISC 0x4000 +#define ERROR_ESBC_CLIENT_HEADER_SG_ENTIRES_BAD 0x8000 +#define ERROR_ESBC_CLIENT_HEADER_SG 0x10000 +#define ERROR_ESBC_CLIENT_HEADER_IMG_SIZE 0x20000 +#define ERROR_ESBC_WRONG_CMD 0x40000 +#define ERROR_ESBC_MISSING_BOOTM 0x80000 +#define ERROR_ESBC_CLIENT_MAX 0x0 + +struct fsl_secboot_errcode { + int errcode; + const char *name; +}; + +static const struct fsl_secboot_errcode fsl_secboot_errcodes[] = { + { ERROR_ESBC_PAMU_INIT, + "Error in initializing PAMU"}, + { ERROR_ESBC_SEC_RESET, + "Error in resetting Job ring of SEC"}, + { ERROR_ESBC_SEC_INIT, + "Error in initializing SEC"}, + { ERROR_ESBC_SEC_ENQ, + "Error in enqueue operation by SEC"}, + { ERROR_ESBC_SEC_DEQ_TO, + "Dequeue operation by SEC is timed out"}, + { ERROR_ESBC_SEC_DEQ, + "Error in dequeue operation by SEC"}, + { ERROR_ESBC_SEC_JOBQ_STATUS, + "Error in status of the job submitted to SEC"}, + { ERROR_ESBC_CLIENT_CPUID_NO_MATCH, + "Current core is not boot core i.e core0" }, + { ERROR_ESBC_CLIENT_HDR_LOC, + "Header address not in allowed memory range" }, + { ERROR_ESBC_CLIENT_HEADER_BARKER, + "Wrong barker code in header" }, + { ERROR_ESBC_CLIENT_HEADER_KEY_LEN, + "Wrong public key length in header" }, + { ERROR_ESBC_CLIENT_HEADER_SIG_LEN, + "Wrong signature length in header" }, + { ERROR_ESBC_CLIENT_HEADER_KEY_LEN_NOT_TWICE_SIG_LEN, + "Public key length not twice of signature length" }, + { ERROR_ESBC_CLIENT_HEADER_KEY_MOD_1, + "Public key Modulus most significant bit not set" }, + { ERROR_ESBC_CLIENT_HEADER_KEY_MOD_2, + "Public key Modulus in header not odd" }, + { ERROR_ESBC_CLIENT_HEADER_SIG_KEY_MOD, + "Signature not less than modulus" }, + { ERROR_ESBC_CLIENT_HEADER_SG_ESBC_EP, + "Entry point not in allowed space or one of the SG entries" }, + { ERROR_ESBC_CLIENT_HASH_COMPARE_KEY, + "Public key hash comparison failed" }, + { ERROR_ESBC_CLIENT_HASH_COMPARE_EM, + "RSA verification failed" }, + { ERROR_ESBC_CLIENT_SSM_TRUSTSTS, + "SNVS not in TRUSTED state" }, + { ERROR_ESBC_CLIENT_BAD_ADDRESS, + "Bad address error" }, + { ERROR_ESBC_CLIENT_MISC, + "Miscallaneous error" }, + { ERROR_ESBC_CLIENT_HEADER_SG, + "No SG support" }, + { ERROR_ESBC_CLIENT_HEADER_IMG_SIZE, + "Invalid Image size" }, + { ERROR_ESBC_WRONG_CMD, + "Unknown cmd/Wrong arguments. Core in infinite loop"}, + { ERROR_ESBC_MISSING_BOOTM, + "Bootm command missing from bootscript" }, + { ERROR_ESBC_CLIENT_HEADER_KEY_REVOKED, + "Selected key is revoked" }, + { ERROR_ESBC_CLIENT_HEADER_INVALID_SRK_NUM_ENTRY, + "Wrong key entry" }, + { ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM, + "Wrong key is selected" }, + { ERROR_ESBC_CLIENT_HEADER_INV_SRK_ENTRY_KEYLEN, + "Wrong srk public key len in header" }, + { ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED, + "Selected IE key is revoked" }, + { ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY, + "Wrong key entry in IE Table" }, + { ERROR_ESBC_CLIENT_HEADER_INVALID_IE_KEY_NUM, + "Wrong IE key is selected" }, + { ERROR_ESBC_CLIENT_HEADER_INV_IE_ENTRY_KEYLEN, + "Wrong IE public key len in header" }, + { ERROR_IE_TABLE_NOT_FOUND, + "Information about IE Table missing" }, + { ERROR_ESBC_CLIENT_MAX, "NULL" } +}; + +void fsl_secboot_handle_error(int error); +#endif diff --git a/include/fsl_sfp.h b/include/fsl_sfp.h new file mode 100644 index 0000000000..353a123ee5 --- /dev/null +++ b/include/fsl_sfp.h @@ -0,0 +1,85 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_SFP_SNVS_ +#define _FSL_SFP_SNVS_ + +#include <common.h> +#include <config.h> +#include <asm/io.h> + +#ifdef CONFIG_SYS_FSL_SRK_LE +#define srk_in32(a) in_le32(a) +#else +#define srk_in32(a) in_be32(a) +#endif + +#ifdef CONFIG_SYS_FSL_SFP_LE +#define sfp_in32(a) in_le32(a) +#define sfp_out32(a, v) out_le32(a, v) +#define sfp_in16(a) in_le16(a) +#elif defined(CONFIG_SYS_FSL_SFP_BE) +#define sfp_in32(a) in_be32(a) +#define sfp_out32(a, v) out_be32(a, v) +#define sfp_in16(a) in_be16(a) +#else +#error Neither CONFIG_SYS_FSL_SFP_LE nor CONFIG_SYS_FSL_SFP_BE is defined +#endif + +/* Number of SRKH registers */ +#define NUM_SRKH_REGS 8 + +#ifdef CONFIG_SYS_FSL_SFP_VER_3_2 +struct ccsr_sfp_regs { + u32 ospr; /* 0x200 */ + u32 ospr1; /* 0x204 */ + u32 reserved1[4]; + u32 fswpr; /* 0x218 FSL Section Write Protect */ + u32 fsl_uid; /* 0x21c FSL UID 0 */ + u32 fsl_uid_1; /* 0x220 FSL UID 0 */ + u32 reserved2[12]; + u32 srk_hash[8]; /* 0x254 Super Root Key Hash */ + u32 oem_uid; /* 0x274 OEM UID 0*/ + u32 oem_uid_1; /* 0x278 OEM UID 1*/ + u32 oem_uid_2; /* 0x27c OEM UID 2*/ + u32 oem_uid_3; /* 0x280 OEM UID 3*/ + u32 oem_uid_4; /* 0x284 OEM UID 4*/ + u32 reserved3[8]; +}; +#elif defined(CONFIG_SYS_FSL_SFP_VER_3_0) +struct ccsr_sfp_regs { + u32 ospr; /* 0x200 */ + u32 reserved0[14]; + u32 srk_hash[NUM_SRKH_REGS]; /* 0x23c Super Root Key Hash */ + u32 oem_uid; /* 0x9c OEM Unique ID */ + u8 reserved2[0x04]; + u32 ovpr; /* 0xA4 Intent To Secure */ + u8 reserved4[0x08]; + u32 fsl_uid; /* 0xB0 FSL Unique ID */ + u8 reserved5[0x04]; + u32 fsl_spfr0; /* Scratch Pad Fuse Register 0 */ + u32 fsl_spfr1; /* Scratch Pad Fuse Register 1 */ + +}; +#else +struct ccsr_sfp_regs { + u8 reserved0[0x40]; + u32 ospr; /* 0x40 OEM Security Policy Register */ + u8 reserved2[0x38]; + u32 srk_hash[8]; /* 0x7c Super Root Key Hash */ + u32 oem_uid; /* 0x9c OEM Unique ID */ + u8 reserved4[0x4]; + u32 ovpr; /* 0xA4 OEM Validation Policy Register */ + u8 reserved8[0x8]; + u32 fsl_uid; /* 0xB0 FSL Unique ID */ +}; +#endif +#define ITS_MASK 0x00000004 +#define ITS_BIT 2 +#define OSPR_KEY_REVOC_SHIFT 13 +#define OSPR_KEY_REVOC_MASK 0x0000e000 + +#endif diff --git a/include/fsl_validate.h b/include/fsl_validate.h new file mode 100644 index 0000000000..c4605349a6 --- /dev/null +++ b/include/fsl_validate.h @@ -0,0 +1,199 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FSL_VALIDATE_H_ +#define _FSL_VALIDATE_H_ + +#include <fsl_sec.h> +#include <fsl_sec_mon.h> +#include <command.h> +#include <linux/types.h> + +#define WORD_SIZE 4 + +/* Minimum and maximum size of RSA signature length in bits */ +#define KEY_SIZE 4096 +#define KEY_SIZE_BYTES (KEY_SIZE/8) +#define KEY_SIZE_WORDS (KEY_SIZE_BYTES/(WORD_SIZE)) + +extern struct jobring jr; + +#ifdef CONFIG_KEY_REVOCATION +/* Srk table and key revocation check */ +#define SRK_FLAG 0x01 +#define UNREVOCABLE_KEY 4 +#define ALIGN_REVOC_KEY 3 +#define MAX_KEY_ENTRIES 4 +#endif + +/* Barker code size in bytes */ +#define ESBC_BARKER_LEN 4 /* barker code length in ESBC uboot client */ + /* header */ + +/* No-error return values */ +#define ESBC_VALID_HDR 0 /* header is valid */ + +/* Maximum number of SG entries allowed */ +#define MAX_SG_ENTRIES 8 + +/* + * ESBC uboot client header structure. + * The struct contain the following fields + * barker code + * public key offset + * pub key length + * signature offset + * length of the signature + * ptr to SG table + * no of entries in SG table + * esbc ptr + * size of esbc + * esbc entry point + * Scatter gather flag + * UID flag + * FSL UID + * OEM UID + * Here, pub key is modulus concatenated with exponent + * of equal length + */ +struct fsl_secboot_img_hdr { + u8 barker[ESBC_BARKER_LEN]; /* barker code */ + union { + u32 pkey; /* public key offset */ +#ifdef CONFIG_KEY_REVOCATION + u32 srk_tbl_off; +#endif + }; + + union { + u32 key_len; /* pub key length in bytes */ +#ifdef CONFIG_KEY_REVOCATION + struct { + u32 srk_table_flag:8; + u32 srk_sel:8; + u32 num_srk:16; + } len_kr; +#endif + }; + + u32 psign; /* signature offset */ + u32 sign_len; /* length of the signature in bytes */ + union { + struct fsl_secboot_sg_table *psgtable; /* ptr to SG table */ + u8 *pimg; /* ptr to ESBC client image */ + }; + union { + u32 sg_entries; /* no of entries in SG table */ + u32 img_size; /* ESBC client image size in bytes */ + }; + ulong img_start; /* ESBC client entry point */ + u32 sg_flag; /* Scatter gather flag */ + u32 uid_flag; + u32 fsl_uid_0; + u32 oem_uid_0; + u32 reserved1[2]; + u32 fsl_uid_1; + u32 oem_uid_1; + u32 reserved2[2]; + u32 ie_flag; + u32 ie_key_sel; +}; + +#if defined(CONFIG_FSL_ISBC_KEY_EXT) +struct ie_key_table { + u32 key_len; + u8 pkey[2 * KEY_SIZE_BYTES]; +}; + +struct ie_key_info { + uint32_t key_revok; + uint32_t num_keys; + struct ie_key_table ie_key_tbl[32]; +}; +#endif + +#ifdef CONFIG_KEY_REVOCATION +struct srk_table { + u32 key_len; + u8 pkey[2 * KEY_SIZE_BYTES]; +}; +#endif + +/* + * SG table. + */ +#if defined(CONFIG_FSL_TRUST_ARCH_v1) && defined(CONFIG_FSL_CORENET) +/* + * This struct contains the following fields + * length of the segment + * source address + */ +struct fsl_secboot_sg_table { + u32 len; /* length of the segment in bytes */ + ulong src_addr; /* ptr to the data segment */ +}; +#else +/* + * This struct contains the following fields + * length of the segment + * Destination Target ID + * source address + * destination address + */ +struct fsl_secboot_sg_table { + u32 len; + u32 trgt_id; + ulong src_addr; + ulong dst_addr; +}; +#endif + +/* + * ESBC private structure. + * Private structure used by ESBC to store following fields + * ESBC client key + * ESBC client key hash + * ESBC client Signature + * Encoded hash recovered from signature + * Encoded hash of ESBC client header plus ESBC client image + */ +struct fsl_secboot_img_priv { + uint32_t hdr_location; + ulong ie_addr; + u32 key_len; + struct fsl_secboot_img_hdr hdr; + + u8 img_key[2 * KEY_SIZE_BYTES]; /* ESBC client key */ + u8 img_key_hash[32]; /* ESBC client key hash */ + +#ifdef CONFIG_KEY_REVOCATION + struct srk_table srk_tbl[MAX_KEY_ENTRIES]; +#endif + u8 img_sign[KEY_SIZE_BYTES]; /* ESBC client signature */ + + u8 img_encoded_hash[KEY_SIZE_BYTES]; /* EM wrt RSA PKCSv1.5 */ + /* Includes hash recovered after + * signature verification + */ + + u8 img_encoded_hash_second[KEY_SIZE_BYTES];/* EM' wrt RSA PKCSv1.5 */ + /* Includes hash of + * ESBC client header plus + * ESBC client image + */ + + struct fsl_secboot_sg_table sgtbl[MAX_SG_ENTRIES]; /* SG table */ + u32 ehdrloc; /* ESBC client location */ +}; + +int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); +int fsl_secboot_blob_encap(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); +int fsl_secboot_blob_decap(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]); + +#endif diff --git a/include/hw_sha.h b/include/hw_sha.h index 783350d513..ab19a99188 100644 --- a/include/hw_sha.h +++ b/include/hw_sha.h @@ -7,7 +7,7 @@ */ #ifndef __HW_SHA_H #define __HW_SHA_H - +#include <hash.h> /** * Computes hash value of input pbuf using h/w acceleration @@ -34,4 +34,43 @@ void hw_sha256(const uchar * in_addr, uint buflen, */ void hw_sha1(const uchar * in_addr, uint buflen, uchar * out_addr, uint chunk_size); + +/* + * Create the context for sha progressive hashing using h/w acceleration + * + * @algo: Pointer to the hash_algo struct + * @ctxp: Pointer to the pointer of the context for hashing + * @return 0 if ok, -ve on error + */ +int hw_sha_init(struct hash_algo *algo, void **ctxp); + +/* + * Update buffer for sha progressive hashing using h/w acceleration + * + * The context is freed by this function if an error occurs. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @buf: Pointer to the buffer being hashed + * @size: Size of the buffer being hashed + * @is_last: 1 if this is the last update; 0 otherwise + * @return 0 if ok, -ve on error + */ +int hw_sha_update(struct hash_algo *algo, void *ctx, const void *buf, + unsigned int size, int is_last); + +/* + * Copy sha hash result at destination location + * + * The context is freed after completion of hash operation or after an error. + * + * @algo: Pointer to the hash_algo struct + * @ctx: Pointer to the context for hashing + * @dest_buf: Pointer to the destination buffer where hash is to be copied + * @size: Size of the buffer being hashed + * @return 0 if ok, -ve on error + */ +int hw_sha_finish(struct hash_algo *algo, void *ctx, void *dest_buf, + int size); + #endif diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 5797498adc..efb04eeed4 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -11,6 +11,11 @@ #include <asm/linkage.h> +/* Some toolchains use other characters (e.g. '`') to mark new line in macro */ +#ifndef ASM_NL +#define ASM_NL ; +#endif + #ifdef __cplusplus #define CPP_ASMLINKAGE extern "C" #else @@ -43,15 +48,15 @@ #define ALIGN_STR __ALIGN_STR #define LENTRY(name) \ - ALIGN; \ + ALIGN ASM_NL \ SYMBOL_NAME_LABEL(name) #define ENTRY(name) \ - .globl SYMBOL_NAME(name); \ + .globl SYMBOL_NAME(name) ASM_NL \ LENTRY(name) #define WEAK(name) \ - .weak SYMBOL_NAME(name); \ + .weak SYMBOL_NAME(name) ASM_NL \ LENTRY(name) #ifndef END @@ -61,7 +66,7 @@ #ifndef ENDPROC #define ENDPROC(name) \ - .type name STT_FUNC; \ + .type name STT_FUNC ASM_NL \ END(name) #endif diff --git a/include/mc34704.h b/include/mc34704.h index 53716e0398..482d51ab2f 100644 --- a/include/mc34704.h +++ b/include/mc34704.h @@ -40,6 +40,7 @@ enum { /* GENERAL2 register fields */ #define ONOFFE (1 << 0) #define ONOFFD (1 << 1) +#define ONOFFA (1 << 3) #define ALLOFF (1 << 4) #endif /* __MC34704_H__ */ diff --git a/include/mmc.h b/include/mmc.h index 7d6feca5b4..2ad0f191c3 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -106,6 +106,7 @@ #define SD_CMD_SEND_RELATIVE_ADDR 3 #define SD_CMD_SWITCH_FUNC 6 #define SD_CMD_SEND_IF_COND 8 +#define SD_CMD_SWITCH_UHS18V 11 #define SD_CMD_APP_SET_BUS_WIDTH 6 #define SD_CMD_ERASE_WR_BLK_START 32 diff --git a/include/netdev.h b/include/netdev.h index daffc1222d..90140bd9bb 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -55,7 +55,6 @@ int ftmac100_initialize(bd_t *bits); int ftmac110_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); -int ks8695_eth_initialize(void); int ks8851_mll_initialize(u8 dev_num, int base_addr); int lan91c96_initialize(u8 dev_num, int base_addr); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h index d304658b9a..07199b4f89 100644 --- a/include/power/pfuze100_pmic.h +++ b/include/power/pfuze100_pmic.h @@ -232,5 +232,7 @@ enum { #define APS_PFM 0xc #define PWM_PFM 0xd +#define SWITCH_SIZE 0x7 + int power_pfuze100_init(unsigned char bus); #endif diff --git a/include/power/tps65217.h b/include/power/tps65217.h index 297c4cbd99..93cbe36c47 100644 --- a/include/power/tps65217.h +++ b/include/power/tps65217.h @@ -73,6 +73,7 @@ enum { #define TPS65217_LDO_VOLTAGE_OUT_1_8 0x06 #define TPS65217_LDO_VOLTAGE_OUT_3_3 0x1F +#define TPS65217_PWR_OFF 0x80 #define TPS65217_PWR_SRC_USB_BITMASK 0x4 #define TPS65217_PWR_SRC_AC_BITMASK 0x8 diff --git a/include/samsung/misc.h b/include/samsung/misc.h index 607e8d4922..0f957dc367 100644 --- a/include/samsung/misc.h +++ b/include/samsung/misc.h @@ -29,9 +29,8 @@ void draw_logo(void); #endif #ifdef CONFIG_SET_DFU_ALT_INFO -char *get_dfu_alt_system(void); -char *get_dfu_alt_boot(void); -void set_dfu_alt_info(void); +char *get_dfu_alt_system(char *interface, char *devstr); +char *get_dfu_alt_boot(char *interface, char *devstr); #endif #ifdef CONFIG_BOARD_TYPES void set_board_type(void); diff --git a/include/serial.h b/include/serial.h index 66ed12c9c2..de40e9406f 100644 --- a/include/serial.h +++ b/include/serial.h @@ -29,7 +29,7 @@ extern struct serial_device *default_serial_console(void); #if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ - defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ + defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ @@ -182,7 +182,6 @@ void evb64260_serial_initialize(void); void imx_serial_initialize(void); void iop480_serial_initialize(void); void jz_serial_initialize(void); -void ks8695_serial_initialize(void); void leon2_serial_initialize(void); void leon3_serial_initialize(void); void lh7a40x_serial_initialize(void); diff --git a/include/stdio_dev.h b/include/stdio_dev.h index 24da23fe50..95d6246f59 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -23,7 +23,7 @@ struct stdio_dev { int flags; /* Device flags: input/output/system */ int ext; /* Supported extensions */ - char name[16]; /* Device name */ + char name[32]; /* Device name */ /* GENERAL functions */ |
