summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/AdderII.h4
-rw-r--r--include/configs/MIP405.h10
-rw-r--r--include/configs/PIP405.h12
-rw-r--r--include/configs/SXNI855T.h29
-rw-r--r--include/fat.h1
-rw-r--r--include/jffs2/jffs2.h1
-rw-r--r--include/part.h1
7 files changed, 42 insertions, 16 deletions
diff --git a/include/configs/AdderII.h b/include/configs/AdderII.h
index c2cff23a1c..4c2ba7d582 100644
--- a/include/configs/AdderII.h
+++ b/include/configs/AdderII.h
@@ -48,10 +48,10 @@
#define CONFIG_CLOCKS_IN_MHZ 1
/* Monitor Functions */
-#define CONFIG_COMMANDS ( CFG_CMD_FLASH | \
+#define CONFIG_COMMANDS ( CFG_CMD_ENV | \
+ CFG_CMD_FLASH | \
CFG_CMD_MEMORY| \
CFG_CMD_NET | \
- CFG_CMD_ENV | \
CFG_CMD_PING | \
CFG_CMD_SDRAM )
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 49b830b86f..61a799daa4 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -67,6 +67,7 @@
CFG_CMD_DATE | \
CFG_CMD_ELF | \
CFG_CMD_MII | \
+ CFG_CMD_FAT | \
CFG_CMD_PING | \
CFG_CMD_SAVES | \
CFG_CMD_BSP )
@@ -246,9 +247,10 @@
/*
* Init Memory Controller:
*/
-
-#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */
+#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */
+/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
+#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */
#define CONFIG_BOARD_PRE_INIT
@@ -325,7 +327,7 @@
#undef CONFIG_IDE_LED /* no led for ide supported */
#define CONFIG_IDE_RESET /* reset for ide supported... */
#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
-
+#define CONFIG_SUPPORT_VFAT
/************************************************************
* ATAPI support (experimental)
************************************************************/
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index d9f8be8eed..b9107ccf7c 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -50,11 +50,13 @@
CFG_CMD_PCI | \
CFG_CMD_CACHE | \
CFG_CMD_IRQ | \
+ CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_REGINFO | \
CFG_CMD_FDC | \
CFG_CMD_SCSI | \
+ CFG_CMD_FAT | \
CFG_CMD_DATE | \
CFG_CMD_ELF | \
CFG_CMD_USB | \
@@ -141,7 +143,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
+#define CONFIG_MISC_INIT_R
/***********************************************************
* Miscellaneous configurable options
**********************************************************/
@@ -231,9 +233,12 @@
/*
* Init Memory Controller:
*/
+#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */
+#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */
+/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
+#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */
-#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+#define CONFIG_BOARD_PRE_INIT
/* Configuration Port location */
#define CONFIG_PORT_ADDR 0xF4000000
@@ -299,6 +304,7 @@
#undef CONFIG_IDE_LED /* no led for ide supported */
#define CONFIG_IDE_RESET /* reset for ide supported... */
#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
+#define CONFIG_SUPPORT_VFAT
/************************************************************
* ATAPI support (experimental)
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index bdaf683c36..d6fa798075 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -145,12 +145,22 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_EEPROM | \
+ CFG_CMD_JFFS2 | \
CFG_CMD_NAND | \
CFG_CMD_DATE)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
+#define CFG_JFFS_CUSTOM_PART
+#define CFG_JFFS2_SORT_FRAGMENTS
+/* JFFS2 location when using NOR flash */
+#define CFG_JFFS2_BASE (CFG_FLASH_BASE + 0x80000)
+#define CFG_JFFS2_SIZE (0x780000)
+/* JFFS2 location (in RAM) when using NAND flash */
+#define CFG_JFFS2_RAMBASE 0x400000
+#define CFG_JFFS2_RAMSIZE 0x200000 /* NAND boot partition is 2MiB */
+
/* NAND flash support */
#define CONFIG_MTD_NAND_ECC_JFFS2
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
@@ -405,13 +415,18 @@
#define CONFIG_RESET_ON_PANIC /* reset if system panic() */
-/* to put environment in EEROM */
-#define CFG_ENV_IS_IN_EEPROM 1
-#define CFG_ENV_OFFSET 0 /* Start right at beginning of NVRAM */
-#define CFG_ENV_SIZE 1024 /* Use only a part of it*/
-
-#if 1
-#define CONFIG_BOOT_RETRY_TIME 60 /* boot if no command in 60 seconds */
+#define CFG_ENV_IS_IN_FLASH
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* environment is in FLASH */
+ #define CFG_ENV_ADDR 0xF8040000 /* AM29LV641 or AM29LV800BT */
+ #define CFG_ENV_ADDR_REDUND 0xF8050000 /* AM29LV641 or AM29LV800BT */
+ #define CFG_ENV_SECT_SIZE 0x00010000
+ #define CFG_ENV_SIZE 0x00002000
+#else
+ /* environment is in EEPROM */
+ #define CFG_ENV_IS_IN_EEPROM 1
+ #define CFG_ENV_OFFSET 0 /* at beginning of EEPROM */
+ #define CFG_ENV_SIZE 1024 /* Use only a part of it*/
#endif
#if 1
diff --git a/include/fat.h b/include/fat.h
index b56219ced8..6f0f40fa61 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -204,5 +204,6 @@ int file_fat_detectfs(void);
int file_fat_ls(const char *dir);
long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
const char *file_getfsname(int idx);
+int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
#endif /* _FAT_H_ */
diff --git a/include/jffs2/jffs2.h b/include/jffs2/jffs2.h
index fc3a8419a3..4bdc525ce2 100644
--- a/include/jffs2/jffs2.h
+++ b/include/jffs2/jffs2.h
@@ -82,6 +82,7 @@
#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
/* Maybe later... */
/*#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) */
diff --git a/include/part.h b/include/part.h
index 2f5a01dead..c24f90920a 100644
--- a/include/part.h
+++ b/include/part.h
@@ -50,6 +50,7 @@ typedef struct block_dev_desc {
#define IF_TYPE_ATAPI 3
#define IF_TYPE_USB 4
#define IF_TYPE_DOC 5
+#define IF_TYPE_MMC 6
/* Part types */
#define PART_TYPE_UNKNOWN 0x00
OpenPOWER on IntegriCloud