diff options
Diffstat (limited to 'include')
394 files changed, 3424 insertions, 874 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index f2810a1bd7..0abcbe4c0b 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -141,5 +141,6 @@ typedef struct global_data { #define GD_FLG_SPL_INIT 0x00400 /* spl_init() has been called */ #define GD_FLG_SKIP_RELOC 0x00800 /* Don't relocate */ #define GD_FLG_RECORD 0x01000 /* Record console */ +#define GD_FLG_ENV_DEFAULT 0x02000 /* Default variable flag */ #endif /* __ASM_GENERIC_GBL_DATA_H */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 2500c10450..4aa0004fab 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -251,6 +251,8 @@ struct dm_gpio_ops { int value); int (*get_value)(struct udevice *dev, unsigned offset); int (*set_value)(struct udevice *dev, unsigned offset, int value); + int (*get_open_drain)(struct udevice *dev, unsigned offset); + int (*set_open_drain)(struct udevice *dev, unsigned offset, int value); /** * get_function() Get the GPIO function * @@ -550,6 +552,38 @@ int dm_gpio_get_value(const struct gpio_desc *desc); int dm_gpio_set_value(const struct gpio_desc *desc, int value); /** + * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active + * + * This checks if open-drain-mode for a GPIO is enabled or not. This method is + * optional. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or + * -ve on error + */ +int dm_gpio_get_open_drain(struct gpio_desc *desc); + +/** + * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off + * + * This enables or disables open-drain mode for a GPIO. This method is + * optional; if the driver does not support it, nothing happens when the method + * is called. + * + * In open-drain mode, instead of actively driving the output (Push-pull + * output), the GPIO's pin is connected to the collector (for a NPN transistor) + * or the drain (for a MOSFET) of a transistor, respectively. The pin then + * either forms an open circuit or a connection to ground, depending on the + * state of the transistor. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return 0 if OK, -ve on error + */ +int dm_gpio_set_open_drain(struct gpio_desc *desc, int value); + +/** * dm_gpio_set_dir() - Set the direction for a GPIO * * This sets up the direction according tot the provided flags. It will do diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h index 6993128b1b..8a2f46f6c7 100644 --- a/include/atmel_lcd.h +++ b/include/atmel_lcd.h @@ -10,6 +10,15 @@ #ifndef _ATMEL_LCD_H_ #define _ATMEL_LCD_H_ +/** + * struct atmel_lcd_platdata - platform data for Atmel LCDs with driver model + * + * @timing_index: Index of LCD timing to use in device tree node + */ +struct atmel_lcd_platdata { + int timing_index; +}; + typedef struct vidinfo { ushort vl_col; /* Number of columns (i.e. 640) */ ushort vl_row; /* Number of rows (i.e. 480) */ diff --git a/include/bootstage.h b/include/bootstage.h index 0880a680b9..a589be6316 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -213,7 +213,9 @@ enum bootstage_id { */ ulong timer_get_boot_us(void); -#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) +#if defined(USE_HOSTCC) +#define show_boot_progress(val) do {} while (0) +#else /* * Board code can implement show_boot_progress() if needed. * @@ -221,8 +223,6 @@ ulong timer_get_boot_us(void); * has occurred. */ void show_boot_progress(int val); -#else -#define show_boot_progress(val) do {} while (0) #endif #if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ diff --git a/include/clk-uclass.h b/include/clk-uclass.h new file mode 100644 index 0000000000..07c1065495 --- /dev/null +++ b/include/clk-uclass.h @@ -0,0 +1,95 @@ +/* + * Copyright (c) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CLK_UCLASS_H +#define _CLK_UCLASS_H + +/* See clk.h for background documentation. */ + +#include <clk.h> +#include <fdtdec.h> + +/** + * struct clk_ops - The functions that a clock driver must implement. + */ +struct clk_ops { + /** + * of_xlate - Translate a client's device-tree (OF) clock specifier. + * + * The clock core calls this function as the first step in implementing + * a client's clk_get_by_*() call. + * + * If this function pointer is set to NULL, the clock core will use a + * default implementation, which assumes #clock-cells = <1>, and that + * the DT cell contains a simple integer clock ID. + * + * At present, the clock API solely supports device-tree. If this + * changes, other xxx_xlate() functions may be added to support those + * other mechanisms. + * + * @clock: The clock struct to hold the translation result. + * @args: The clock specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct clk *clock, + struct fdtdec_phandle_args *args); + /** + * request - Request a translated clock. + * + * The clock core calls this function as the second step in + * implementing a client's clk_get_by_*() call, following a successful + * xxx_xlate() call, or as the only step in implementing a client's + * clk_request() call. + * + * @clock: The clock struct to request; this has been fille in by + * a previoux xxx_xlate() function call, or by the caller + * of clk_request(). + * @return 0 if OK, or a negative error code. + */ + int (*request)(struct clk *clock); + /** + * free - Free a previously requested clock. + * + * This is the implementation of the client clk_free() API. + * + * @clock: The clock to free. + * @return 0 if OK, or a negative error code. + */ + int (*free)(struct clk *clock); + /** + * get_rate() - Get current clock rate. + * + * @clk: The clock to query. + * @return clock rate in Hz, or -ve error code + */ + ulong (*get_rate)(struct clk *clk); + /** + * set_rate() - Set current clock rate. + * + * @clk: The clock to manipulate. + * @rate: New clock rate in Hz. + * @return new rate, or -ve error code. + */ + ulong (*set_rate)(struct clk *clk, ulong rate); + /** + * enable() - Enable a clock. + * + * @clk: The clock to manipulate. + * @return zero on success, or -ve error code. + */ + int (*enable)(struct clk *clk); + /** + * disable() - Disable a clock. + * + * @clk: The clock to manipulate. + * @return zero on success, or -ve error code. + */ + int (*disable)(struct clk *clk); +}; + +#endif diff --git a/include/clk.h b/include/clk.h index ca20c3dd27..2f31cf70e3 100644 --- a/include/clk.h +++ b/include/clk.h @@ -1,6 +1,7 @@ /* * Copyright (c) 2015 Google, Inc * Written by Simon Glass <sjg@chromium.org> + * Copyright (c) 2016, NVIDIA CORPORATION. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,125 +9,166 @@ #ifndef _CLK_H_ #define _CLK_H_ -#include <errno.h> #include <linux/types.h> -struct udevice; +/** + * A clock is a hardware signal that oscillates autonomously at a specific + * frequency and duty cycle. Most hardware modules require one or more clock + * signal to drive their operation. Clock signals are typically generated + * externally to the HW module consuming them, by an entity this API calls a + * clock provider. This API provides a standard means for drivers to enable and + * disable clocks, and to set the rate at which they oscillate. + * + * A driver that implements UCLASS_CLOCK is a clock provider. A provider will + * often implement multiple separate clocks, since the hardware it manages + * often has this capability. clock_uclass.h describes the interface which + * clock providers must implement. + * + * Clock consumers/clients are the HW modules driven by the clock signals. This + * header file describes the API used by drivers for those HW modules. + */ -int soc_clk_dump(void); +struct udevice; -struct clk_ops { - /** - * get_rate() - Get current clock rate - * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, or -ve error code - */ - ulong (*get_rate)(struct udevice *dev); - - /** - * set_rate() - Set current clock rate - * - * @dev: Device to adjust - * @rate: New clock rate in Hz - * @return new rate, or -ve error code - */ - ulong (*set_rate)(struct udevice *dev, ulong rate); - - /** - * enable() - Enable the clock for a peripheral - * - * @dev: clock provider - * @periph: Peripheral ID to enable - * @return zero on success, or -ve error code - */ - int (*enable)(struct udevice *dev, int periph); - - /** - * get_periph_rate() - Get clock rate for a peripheral - * - * @dev: Device to check (UCLASS_CLK) - * @periph: Peripheral ID to check - * @return clock rate in Hz, or -ve error code - */ - ulong (*get_periph_rate)(struct udevice *dev, int periph); - - /** - * set_periph_rate() - Set current clock rate for a peripheral - * - * @dev: Device to update (UCLASS_CLK) - * @periph: Peripheral ID to update - * @return new clock rate in Hz, or -ve error code +/** + * struct clk - A handle to (allowing control of) a single clock. + * + * Clients provide storage for clock handles. The content of the structure is + * managed solely by the clock API and clock drivers. A clock struct is + * initialized by "get"ing the clock struct. The clock struct is passed to all + * other clock APIs to identify which clock signal to operate upon. + * + * @dev: The device which implements the clock signal. + * @id: The clock signal ID within the provider. + * + * Currently, the clock API assumes that a single integer ID is enough to + * identify and configure any clock signal for any clock provider. If this + * assumption becomes invalid in the future, the struct could be expanded to + * either (a) add more fields to allow clock providers to store additional + * information, or (b) replace the id field with an opaque pointer, which the + * provider would dynamically allocated during its .of_xlate op, and process + * during is .request op. This may require the addition of an extra op to clean + * up the allocation. + */ +struct clk { + struct udevice *dev; + /* + * Written by of_xlate. We assume a single id is enough for now. In the + * future, we might add more fields here. */ - ulong (*set_periph_rate)(struct udevice *dev, int periph, ulong rate); + unsigned long id; }; -#define clk_get_ops(dev) ((struct clk_ops *)(dev)->driver->ops) +#if CONFIG_IS_ENABLED(OF_CONTROL) +/** + * clock_get_by_index - Get/request a clock by integer index. + * + * This looks up and requests a clock. The index is relative to the client + * device; each device is assumed to have n clocks associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device clock indices to provider clocks may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @index: The index of the clock to request, within the client's list of + * clocks. + * @clock A pointer to a clock struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int clk_get_by_index(struct udevice *dev, int index, struct clk *clk); /** - * clk_get_rate() - Get current clock rate + * clock_get_by_name - Get/request a clock by name. * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, or -ve error code + * This looks up and requests a clock. The name is relative to the client + * device; each device is assumed to have n clocks associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device clock names to provider clocks may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @name: The name of the clock to request, within the client's list of + * clocks. + * @clock: A pointer to a clock struct to initialize. + * @return 0 if OK, or a negative error code. */ -ulong clk_get_rate(struct udevice *dev); +int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk); +#else +static inline int clk_get_by_index(struct udevice *dev, int index, + struct clk *clk) +{ + return -ENOSYS; +} + +static int clk_get_by_name(struct udevice *dev, const char *name, + struct clk *clk) +{ + return -ENOSYS; +} +#endif /** - * clk_set_rate() - Set current clock rate + * clk_request - Request a clock by provider-specific ID. * - * @dev: Device to adjust - * @rate: New clock rate in Hz - * @return new rate, or -ve error code + * This requests a clock using a provider-specific ID. Generally, this function + * should not be used, since clk_get_by_index/name() provide an interface that + * better separates clients from intimate knowledge of clock providers. + * However, this function may be useful in core SoC-specific code. + * + * @dev: The clock provider device. + * @clock: A pointer to a clock struct to initialize. The caller must + * have already initialized any field in this struct which the + * clock provider uses to identify the clock. + * @return 0 if OK, or a negative error code. */ -ulong clk_set_rate(struct udevice *dev, ulong rate); +int clk_request(struct udevice *dev, struct clk *clk); /** - * clk_enable() - Enable the clock for a peripheral + * clock_free - Free a previously requested clock. * - * @dev: clock provider - * @periph: Peripheral ID to enable - * @return zero on success, or -ve error code + * @clock: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return 0 if OK, or a negative error code. */ -int clk_enable(struct udevice *dev, int periph); +int clk_free(struct clk *clk); /** - * clk_get_periph_rate() - Get current clock rate for a peripheral + * clk_get_rate() - Get current clock rate. * - * @dev: Device to check (UCLASS_CLK) - * @return clock rate in Hz, -ve error code + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return clock rate in Hz, or -ve error code. */ -ulong clk_get_periph_rate(struct udevice *dev, int periph); +ulong clk_get_rate(struct clk *clk); /** - * clk_set_periph_rate() - Set current clock rate for a peripheral + * clk_set_rate() - Set current clock rate. * - * @dev: Device to update (UCLASS_CLK) - * @periph: Peripheral ID to update - * @return new clock rate in Hz, or -ve error code + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @rate: New clock rate in Hz. + * @return new rate, or -ve error code. */ -ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate); +ulong clk_set_rate(struct clk *clk, ulong rate); -#if CONFIG_IS_ENABLED(OF_CONTROL) /** - * clk_get_by_index() - look up a clock referenced by a device + * clk_enable() - Enable (turn on) a clock. * - * Parse a device's 'clocks' list, returning information on the indexed clock, - * ensuring that it is activated. + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return zero on success, or -ve error code. + */ +int clk_enable(struct clk *clk); + +/** + * clk_disable() - Disable (turn off) a clock. * - * @dev: Device containing the clock reference - * @index: Clock index to return (0 = first) - * @clk_devp: Returns clock device - * @return: Peripheral ID for the device to control. This is the first - * argument after the clock node phandle. If there is no arguemnt, - * returns 0. Return -ve error code on any error + * @clk: A clock struct that was previously successfully requested by + * clk_request/get_by_*(). + * @return zero on success, or -ve error code. */ -int clk_get_by_index(struct udevice *dev, int index, struct udevice **clk_devp); -#else -static inline int clk_get_by_index(struct udevice *dev, int index, - struct udevice **clk_devp) -{ - return -ENOSYS; -} -#endif +int clk_disable(struct clk *clk); -#endif /* _CLK_H_ */ +int soc_clk_dump(void); + +#endif diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index dfc2cbc022..9244680452 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -27,7 +27,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE -#define CONFIG_BOOTDELAY 2 #define CONFIG_SYS_LONGHELP #define CONFIG_MENU #define CONFIG_DOS_PARTITION diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 5249751830..2c3c4ac093 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -802,7 +802,6 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index b092933757..0a9d8a64af 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -394,7 +394,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index aaddfca2cd..756beec61b 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -632,7 +632,6 @@ combinations. this should be removed later #define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #ifdef CONFIG_SDCARD #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 1e5b501ab1..69a9798540 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -517,7 +517,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index b60da5e166..c5c3a845e4 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index b66b3ff7ef..db953b9b4a 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 2b2e4e7a5a..b426c18b3b 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 85b1c1544e..1e052b1b4b 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -82,7 +82,6 @@ "" #endif -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ /* LCD */ #ifdef CONFIG_CMD_BMP #define CONFIG_LCD diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index bacd8e0f32..006222881a 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_BOOTFILE "u-boot.bin" #ifdef CONFIG_MCFFEC # define CONFIG_IPADDR 192.162.1.2 diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 7c06fcea39..6c90700ccf 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -17,7 +17,6 @@ #undef CONFIG_WATCHDOG /* disable watchdog */ -#define CONFIG_BOOTDELAY 5 /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index d14f979cdd..faad9703b7 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -18,7 +18,6 @@ #undef CONFIG_WATCHDOG /* disable watchdog */ -#define CONFIG_BOOTDELAY 5 /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 0753dc3afa..a8589049fd 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -57,7 +57,6 @@ * Command line configuration. */ -#define CONFIG_BOOTDELAY 5 #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC # define CONFIG_MII 1 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 1709cccf89..1bdacbcdf8 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -104,7 +104,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x800000 -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND "bootm ffe40000" #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 8131ea0ee1..62f25e9023 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -70,7 +70,6 @@ # endif /* CONFIG_SYS_DISCOVER_PHY */ #endif -#define CONFIG_BOOTDELAY 5 #ifdef CONFIG_MCFFEC # define CONFIG_IPADDR 192.162.1.2 # define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 81e28f0924..03c18da52e 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -79,7 +79,6 @@ #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 661063ce5d..fabbaf084d 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -73,7 +73,6 @@ #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index f0cf715ee2..8fb16bc294 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -73,7 +73,6 @@ #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index e10c3e1929..63b0a1e0ed 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -75,7 +75,6 @@ #define CONFIG_SYS_FEC0_PHYADDR 0 #define CONFIG_SYS_FEC1_PHYADDR 1 -#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ #ifdef CONFIG_SYS_NAND_BOOT #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 00bdbd1824..599ffc7990 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -56,7 +56,6 @@ # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 -# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:2M(kernel)ro,-(jffs2)" # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index f32dd3660a..8301c4670f 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -61,7 +61,6 @@ # define MCFFEC_TOUT_LOOP 50000 # define CONFIG_HAS_ETH1 -# define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" # define CONFIG_ETHPRIME "FEC0" # define CONFIG_IPADDR 192.162.1.2 diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 5fa9683e2c..ccebc30e16 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 #endif -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 9a23e22bfa..7e9f978f6b 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -111,7 +111,6 @@ #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 #endif -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ #define CONFIG_UDP_CHECKSUM #define CONFIG_HOSTNAME M548xEVB diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 75a26edb25..79027e214c 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -97,7 +97,6 @@ * Environment definitions **************************************************************/ #define CONFIG_BAUDRATE 9600 /* STD Baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index e3e3b4414d..578325cd05 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -514,7 +514,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index fda894e119..5613a4a0cd 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -649,7 +649,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 800000 -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 41b40cb2d1..7ce5f59937 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -602,7 +602,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 5c40e5b3ea..13f954d00e 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -492,7 +492,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 800000 -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 4a1cebb5d6..fd482606ad 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -569,7 +569,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 3518b3fd3b..288b126d02 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -734,7 +734,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 8161903f80..2721255254 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -731,7 +731,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" #endif -#define CONFIG_BOOTDELAY 6 #define CONFIG_BOOTARGS \ "root=/dev/nfs rw" \ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 28ed9c03b9..921d5f399d 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -659,7 +659,6 @@ extern int board_pci_host_broken(void); #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index fa131e23fb..bb06e89b4e 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -679,7 +679,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 800000 -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 03f17f9c35..7c19ff84bc 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -706,7 +706,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 38bd38c8f9..fae4b0c5c5 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -392,7 +392,6 @@ #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index d827d2ab0b..0c2afb5065 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -414,7 +414,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index f3036c1dc2..b9d97c1006 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5de8b19828..e73be48d51 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -540,7 +540,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index c68e1d83d1..fcd55c7743 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -409,7 +409,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index fb76dd1aea..4ed06c9ad4 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -434,7 +434,6 @@ #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 09e32ebcd7..39459ded28 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -433,7 +433,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 923159b904..192cc2ccf1 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -528,7 +528,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index bb7f38e34a..2e6989f816 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -646,7 +646,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index f6d45a9e40..81594932d7 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -500,7 +500,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9b2623c726..f90f7f24a4 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -666,7 +666,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index f4c9312843..80d8fcdd98 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -16,7 +16,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 4d0855567a..5384584c18 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -850,7 +850,6 @@ extern unsigned long get_sdram_size(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 7457dfcd48..bdf0323bfc 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -715,7 +715,6 @@ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index a10310ec27..07a594d15d 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -308,7 +308,6 @@ extern unsigned long get_clock_freq(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index b3fb38c63a..24e5431845 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -676,7 +676,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 9f3c037237..e96fbc5aac 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -44,11 +44,6 @@ #define CONFIG_CMD_EEPROM #define CONFIG_CMD_IRQ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif #define CONFIG_BOOTCOMMAND "" /* autoboot command */ #define CONFIG_BOOTARGS "" /* */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 4506d86eee..e7c7a990f4 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -89,7 +89,6 @@ **************************************************************/ #define CONFIG_BAUDRATE 9600 /* STD Baudrate */ -#define CONFIG_BOOTDELAY 5 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ /* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 71a03756d4..558f3e2ba6 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -118,7 +118,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index a622578bd2..5f17d76744 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 005fa2a5c1..868ca84f99 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -229,7 +229,6 @@ "cp.b 200000 fff90000 70000\0" \ "" -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index ef2ede49b9..b151963502 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -867,7 +867,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 778c64b3f0..06d1d0fc49 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -867,7 +867,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index be4ae712b5..9f5063c333 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -749,7 +749,6 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index ed3493b684..a8f4f742e6 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -832,7 +832,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /*-1 disables auto-boot*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index f48697c033..1f07a83a1a 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -821,7 +821,6 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index b6be46e004..0ded41e0dd 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -773,7 +773,6 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 276428f4df..f075dfb5f0 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -545,7 +545,6 @@ unsigned long get_board_ddr_clk(void); (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) #endif -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define __USB_PHY_TYPE utmi diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index ab838a8036..9ba69a1d12 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -738,7 +738,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SHA_HW_ACCEL #endif -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define __USB_PHY_TYPE utmi diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 42ebcf04d1..0e4067a3a9 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -199,7 +199,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 395805ca04..c557ba1778 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -37,7 +37,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index ec366370ee..814740b71d 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -35,7 +35,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 2aac682a2c..90e8dd9dd9 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -481,7 +481,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 400000 -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 00c0cc3291..58fd8a4d71 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index ca2602492e..3a4f94c83a 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 39cf02e4c4..134076c73a 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 30bfb8afdd..ad6f8f4bb3 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index abe49b9c92..b935f31100 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 48252c4f98..79248de015 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -30,7 +30,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index a73395a270..d360644c02 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -33,7 +33,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 3db6fa1740..5c6013b41f 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -33,7 +33,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 76c8f7a499..c098f72c67 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -44,7 +44,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 88b97ab319..9d8a607b6f 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -40,7 +40,6 @@ #define CONFIG_BOOTCOUNT_LIMIT -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_TYPES 1 /* support board types */ diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 4ae61ca9cd..0c9e79f4a5 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -590,7 +590,6 @@ #if defined(CONFIG_DONGLE) -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootcmd=run prog_spi_mbrbootcramfs\0" \ "bootfile=uImage\0" \ @@ -720,7 +719,6 @@ #if defined(CONFIG_UCP1020T1) -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \ "bootfile=uImage\0" \ @@ -810,7 +808,6 @@ #else /* For Arcturus Modules */ -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 sec, -1 disables auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootcmd=run norkernel\0" \ "bootfile=uImage\0" \ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 4e349d5caa..968e1dfd64 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -115,7 +115,6 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index d401d3eedb..dde98f6e75 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #undef CONFIG_BOOTARGS #undef CONFIG_BOOTCOMMAND diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index e0c92d0497..7ec404d548 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -321,7 +321,6 @@ * Environment Configuration */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index ee1bff858f..4e240c6b89 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -107,7 +107,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_SYS_AUTOLOAD "n" diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index f0b5b3e188..699ac41d77 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -462,7 +462,6 @@ /* default load addr for tftp and bootm */ #define CONFIG_LOADADDR 400000 -#define CONFIG_BOOTDELAY 2 /* -1 disables auto-boot */ /* the builtin environment and standard greeting */ #define CONFIG_PREBOOT "echo;" \ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 7b9470c801..c4e0a21b8d 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -97,7 +97,6 @@ */ #define CONFIG_FTMAC100 -#define CONFIG_BOOTDELAY 3 /* * SD (MMC) controller diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h new file mode 100644 index 0000000000..f2484cb170 --- /dev/null +++ b/include/configs/am335x_shc.h @@ -0,0 +1,340 @@ +/* + * (C) Copyright 2016 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_AM335X_SHC_H +#define __CONFIG_AM335X_SHC_H + +#include <configs/ti_am335x_common.h> + +/* settings we don;t want on this board */ +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC +#undef CONFIG_CMD_EXT4 +#undef CONFIG_CMD_EXT4_WRITE +#undef CONFIG_CMD_MMC_SPI +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_PXE + +#define CONFIG_CMD_CACHE + +#ifndef CONFIG_SPL_BUILD +# define CONFIG_TIMESTAMP +# define CONFIG_LZO +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +#define MACH_TYPE_BOSCH_SHC_B 9001 +#define MACH_TYPE_BOSCH_SHC_B2 9002 +#define MACH_TYPE_BOSCH_SHC_C 9003 +#define MACH_TYPE_BOSCH_SHC_C2 9004 +#define MACH_TYPE_BOSCH_SHC_C3 9005 +#define MACH_TYPE_BOSCH_SHC 9006 +#ifdef CONFIG_B_SAMPLE +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B +#elif defined CONFIG_B2_SAMPLE +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B2 +#elif defined CONFIG_C_SAMPLE +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C +#elif defined CONFIG_C2_SAMPLE +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C2 +#elif defined CONFIG_C3_SAMPLE +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C3 +#elif defined CONFIG_SERIES +# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC +#endif /* #ifdef CONFIG_B_SAMPLE */ + +#define CONFIG_BOARD_LATE_INIT + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#define CONFIG_VERSION_VARIABLE + +#define CONFIG_ENV_IS_IN_MMC 1 + +/* + * in case of SD Card or Network boot we want to have a possibility to + * debrick the shc, therefore do not read environment from eMMC + */ +#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_SYS_MMC_ENV_DEV 1 +#endif + +/* + * Info when using boot partitions: As environment resides within first + * 128 kB, MLO must start at 128 kB == 0x20000 + * ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1, + * 4..7=general0..3 + */ +#define CONFIG_ENV_SIZE 0x1000 /* 4 KB */ +#define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */ + +#define CONFIG_HSMMC2_8BIT + +#define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */ +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_ISO_PARTITION +#endif +#ifndef CONFIG_SHC_ICT +/* + * In builds other than ICT, reset to retry after timeout + * Define a timeout after which a stopped bootloader continues autoboot + * (only works with CONFIG_RESET_TO_RETRY) + */ +# define CONFIG_BOOT_RETRY_TIME 30 +# define CONFIG_RESET_TO_RETRY +#endif + +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ + "kloadaddr=0x84000000\0" \ + "fdtaddr=0x85000000\0" \ + "fdt_high=0xffffffff\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=uImage\0" \ + "fdtfile=am335x-shc.dtb\0" \ + "verify=no\0" \ + "serverip=10.55.152.184\0" \ + "rootpath=/srv/nfs/shc-rootfs\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=quiet\0" \ + "mmcdev=1\0" \ + "harakiri=0\0" \ + "mmcpart=2\0" \ + "active_root=root1\0" \ + "inactive_root=root2\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ + "ip_method=none\0" \ + "bootargs_defaults=setenv bootargs " \ + "console=${console} " \ + "${optargs}\0" \ + "mmcargs=run bootargs_defaults;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype} ip=${ip_method}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \ + "echo Loaded environment from ${bootenv}; " \ + "run importbootenv; " \ + "fi;\0" \ + "importbootenv=echo Importing environment variables from uEnv.txt ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \ + "loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \ + "loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \ + "netloaduimage=tftp ${loadaddr} ${bootfile}\0" \ + "netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \ + "mmcboot=echo Booting Linux from ${mmcdevice} ...; " \ + "run mmcargs; " \ + "if run loadfdt; then " \ + "echo device tree detected; " \ + "bootm ${kloadaddr} - ${fdtaddr}; " \ + "else " \ + "bootm ${kloadaddr}; " \ + "fi; \0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "run netloaduimage; " \ + "run netargs; " \ + "echo NFS path: ${serverip}:${rootpath};" \ + "if run netloadfdt; then " \ + "echo device tree detected; " \ + "bootm ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "bootm ${loadaddr}; " \ + "fi; \0" \ + "emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \ + "mmcpart_gp=mmcpart gp 1 40; \0" \ + "mmcpart_enhance=mmcpart enhance 0 64; \0" \ + "mmcpart_rel_write=mmcpart rel_write 1f; \0" \ + "mmcpart_commit=mmcpart commit 1; \0" \ + "mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \ + "led_success=gpio set 22; \0" \ + "fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \ + "uenv_exec=if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...; " \ + "run uenvcmd; " \ + "fi;\0" \ + "sd_setup=echo SD/MMC-Card detected on device 0; " \ + "setenv mmcdevice SD; " \ + "setenv mmcdev 0; " \ + "setenv mmcpart 2; " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \ + "emmc_setup=echo eMMC detected on device 1; " \ + "setenv mmcdevice eMMC; " \ + "setenv mmcdev 1; " \ + "run emmc_erase; " \ + "if test ${active_root} = root2; then " \ + "echo Active root is partition 6 (root2); " \ + "setenv mmcpart 6; " \ + "else " \ + "echo Active root is partition 5 (root1); " \ + "setenv mmcpart 5; " \ + "fi; " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" +#endif /* #ifndef CONFIG_SPL_BUILD */ + +#if defined CONFIG_SHC_NETBOOT +/* Network Boot */ +# define CONFIG_BOOTCOMMAND \ + "run fusecmd; " \ + "if run netboot; then " \ + "echo Booting from network; " \ + "else " \ + "echo ERROR: Cannot boot from network!; " \ + "panic; " \ + "fi; " + +#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ +/* SD-Card Boot */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 0; mmc rescan; then " \ + "run sd_setup; " \ + "else " \ + "echo ERROR: SD/MMC-Card not detected!; " \ + "panic; " \ + "fi; " \ + "if run loaduimage; then " \ + "echo Bootable SD/MMC-Card inserted, booting from it!; " \ + "run mmcboot; " \ + "else " \ + "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \ + "panic; " \ + "fi; " + +#elif defined CONFIG_SHC_ICT +/* ICT adapter boots only u-boot and does HW partitioning */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 0; mmc rescan; then " \ + "run sd_setup; " \ + "else " \ + "echo ERROR: SD/MMC-Card not detected!; " \ + "panic; " \ + "fi; " \ + "run fusecmd; " + +#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ +/* Regular Boot from internal eMMC */ +# define CONFIG_BOOTCOMMAND \ + "if mmc dev 1; mmc rescan; then " \ + "run emmc_setup; " \ + "else " \ + "echo ERROR: eMMC device not detected!; " \ + "panic; " \ + "fi; " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else " \ + "echo ERROR Unable to load uImage from eMMC!; " \ + "echo Performing Rollback!; " \ + "setenv _active_ ${active_root}; " \ + "setenv _inactive_ ${inactive_root}; " \ + "setenv active_root ${_inactive_}; " \ + "setenv inactive_root ${_active_}; " \ + "saveenv; " \ + "reset; " \ + "fi; " + +#endif /* Regular Boot */ + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 + +/* SPL */ +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + +/* + * Disable MMC DM for SPL build and can be re-enabled after adding + * DM support in SPL + */ +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_MMC +#undef CONFIG_TIMER +#endif + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +/* I2C configuration */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 1 + +#define CONFIG_SHOW_BOOT_PROGRESS + +#if defined CONFIG_SHC_NETBOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ETH_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_IS_IN_MMC +#endif +#endif +#endif /* ! __CONFIG_AM335X_SHC_H */ diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h index e9e971e511..8454872554 100644 --- a/include/configs/am335x_sl50.h +++ b/include/configs/am335x_sl50.h @@ -10,7 +10,6 @@ #define __CONFIG_AM335X_EVM_H #include <configs/ti_am335x_common.h> -#undef CONFIG_BOOTDELAY #ifndef CONFIG_SPL_BUILD # define CONFIG_TIMESTAMP diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 822e1c8edc..a65d1a884b 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -156,7 +156,6 @@ #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 6f83870868..4d88aac637 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -200,7 +200,6 @@ #endif /* CONFIG_NAND */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index a54303df5c..361704bfd4 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -99,8 +99,6 @@ #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 #define CONFIG_USB_HOST -#define CONFIG_USB_XHCI -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index d53b0fdd89..2db199db33 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -64,8 +64,6 @@ /* USB xHCI HOST */ #define CONFIG_USB_HOST -#define CONFIG_USB_XHCI_DWC3 -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 9fa4d16243..2666ca6f69 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -60,7 +60,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/amcore.h b/include/configs/amcore.h index e819185f77..5667680230 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -18,7 +18,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTCOMMAND "bootm ffc20000" #undef CONFIG_CMD_AES diff --git a/include/configs/ap121.h b/include/configs/ap121.h index b01031c8bb..bf5746fcb8 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -34,7 +34,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ "root=/dev/mtdblock2 " \ "rootfstype=squashfs" diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 0fa73a79a5..5d7e49e4a1 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -38,7 +38,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ "root=/dev/mtdblock2 " \ "rootfstype=squashfs" diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index ae58ec8d2a..7dd24612f1 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -19,7 +19,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_BAUDRATE 38400 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC2,38400" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index be8feed124..37f2d3093a 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -22,7 +22,6 @@ #define CONFIG_CMD_ENV #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC4,115200" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/apf27.h b/include/configs/apf27.h index 2291647c64..f44f71cebe 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -148,7 +148,6 @@ #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ #define CONFIG_INITRD_TAG /* send initrd params */ -#define CONFIG_BOOTDELAY 5 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" #define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index bb29f3f5bc..50eaf609b5 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -93,7 +93,6 @@ #endif /* Boot Linux */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTCOMMAND "run bootcmd_nand" #define CONFIG_LOADADDR 0x41000000 diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h index 8a860eef6a..d6081048fe 100644 --- a/include/configs/arcangel4.h +++ b/include/configs/arcangel4.h @@ -54,7 +54,6 @@ /* * Environment configuration */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyARC0,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR diff --git a/include/configs/aria.h b/include/configs/aria.h index 2d32da1f94..cb506589d9 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -510,7 +510,6 @@ #define CONFIG_LOADADDR 400000 /* default load addr */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 681b4e743e..522b287104 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -22,7 +22,6 @@ #define BOARD_LATE_INIT #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index b08276f32d..e8dca0b2cc 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -149,19 +149,6 @@ /* AUTOBOOT settings - booting images automatically by u-boot after power on */ /* - * used for autoboot, delay in seconds u-boot will wait before starting - * defined (auto-)boot command, setting to -1 disables delay, setting to - * 0 will too prevent access to u-boot command interface: u-boot then has - * to be reflashed - * beware - watchdog is not serviced during autoboot delay time! - */ -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_BOOTDELAY 1 -#else -#define CONFIG_BOOTDELAY 1 -#endif - -/* * The following settings will be contained in the environment block ; if you * want to use a neutral environment all those settings can be manually set in * u-boot: 'set' command diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index dc955b2452..9257c5f029 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -34,7 +34,6 @@ /* general purpose I/O */ #define CONFIG_AT91_GPIO -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 2979b25abc..c92ad85238 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -171,7 +171,6 @@ /* * Boot option */ -#define CONFIG_BOOTDELAY 3 /* default load address */ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_16M diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 9db8d12868..c6d3295f34 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -61,7 +61,6 @@ #define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ #define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index b369624a2c..9c9461bc98 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -69,7 +69,6 @@ #define CONFIG_GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ #define CONFIG_YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index f248049e54..e7bfd49450 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -76,7 +76,6 @@ #define CONFIG_GREEN_LED AT91_PIN_PB8 /* the user1 led */ #define CONFIG_YELLOW_LED AT91_PIN_PC29 /* the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 18eb01dc8c..290b039e11 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -59,7 +59,6 @@ #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 2f8c377413..297938b93e 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -51,7 +51,6 @@ #define CONFIG_ATMEL_LCD_RGB565 #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index d178d9d44b..a383de64bc 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -65,7 +65,6 @@ #define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ #define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * Command line configuration. diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 251094e60b..743fc397d1 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -47,7 +47,6 @@ #define CONFIG_ATMEL_LCD_RGB565 #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index e6f6125dd2..a0f451b1a0 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -62,7 +62,6 @@ #define CONFIG_BOOTCOMMAND \ "fsload; bootm" -#define CONFIG_BOOTDELAY 1 /* * After booting the board for the first time, new ethernet addresses diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index dfa2d93a90..4d9282a7bf 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -81,7 +81,6 @@ #define CONFIG_BOOTCOMMAND \ "fsload 0x10400000 /uImage; bootm" -#define CONFIG_BOOTDELAY 1 /* * After booting the board for the first time, new ethernet addresses diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 9a647d8446..9ddfff2b2c 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -79,7 +79,6 @@ #define CONFIG_BOOTCOMMAND \ "fsload; bootm $(fileaddr)" -#define CONFIG_BOOTDELAY 1 /* * After booting the board for the first time, new ethernet addresses diff --git a/include/configs/axs101.h b/include/configs/axs101.h index 05d2d45b25..c0b68e2277 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -119,7 +119,6 @@ /* * Environment configuration */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyS3,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h new file mode 100644 index 0000000000..bd3c7116d5 --- /dev/null +++ b/include/configs/bcm23550_w1d.h @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BCM23550_W1D_H +#define __BCM23550_W1D_H + +#include <linux/sizes.h> +#include <asm/arch/sysmap.h> + +/* CPU, chip, mach, etc */ +#define CONFIG_KONA +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_KONA_RESET_S + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x9f000000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */ +#define CONFIG_STACKSIZE SZ_256K + +/* GPIO Driver */ +#define CONFIG_KONA_GPIO + +/* MMC/SD Driver */ +#define CONFIG_SDHCI +#define CONFIG_MMC_SDMA +#define CONFIG_KONA_SDHCI +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC + +#define CONFIG_SYS_SDIO_BASE0 SDIO1_BASE_ADDR +#define CONFIG_SYS_SDIO_BASE1 SDIO2_BASE_ADDR +#define CONFIG_SYS_SDIO_BASE2 SDIO3_BASE_ADDR +#define CONFIG_SYS_SDIO_BASE3 SDIO4_BASE_ADDR +#define CONFIG_SYS_SDIO0_MAX_CLK 48000000 +#define CONFIG_SYS_SDIO1_MAX_CLK 48000000 +#define CONFIG_SYS_SDIO2_MAX_CLK 48000000 +#define CONFIG_SYS_SDIO3_MAX_CLK 48000000 +#define CONFIG_SYS_SDIO0 "sdio1" +#define CONFIG_SYS_SDIO1 "sdio2" +#define CONFIG_SYS_SDIO2 "sdio3" +#define CONFIG_SYS_SDIO3 "sdio4" + +/* I2C Driver */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_KONA +#define CONFIG_SYS_SPD_BUS_NUM 3 /* Start with PMU bus */ +#define CONFIG_SYS_MAX_I2C_BUS 4 +#define CONFIG_SYS_I2C_BASE0 BSC1_BASE_ADDR +#define CONFIG_SYS_I2C_BASE1 BSC2_BASE_ADDR +#define CONFIG_SYS_I2C_BASE2 BSC3_BASE_ADDR +#define CONFIG_SYS_I2C_BASE3 PMU_BSC_BASE_ADDR + +/* Timer Driver */ +#define CONFIG_SYS_TIMER_RATE 32000 +#define CONFIG_SYS_TIMER_COUNTER (TIMER_BASE_ADDR + 4) /* STCLO offset */ + +/* Init functions */ +#define CONFIG_MISC_INIT_R /* board's misc_init_r function */ + +/* Some commands use this as the default load address */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + +/* No mtest functions as recommended */ + +/* + * This is the initial SP which is used only briefly for relocating the u-boot + * image to the top of SDRAM. After relocation u-boot moves the stack to the + * proper place. + */ +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE + +/* Serial Info */ +#define CONFIG_SYS_NS16550_SERIAL +/* Post pad 3 bytes after each reg addr */ +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 13000000 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 0x3e000000 + +#define CONFIG_BAUDRATE 115200 + +/* must fit into GPT:u-boot-env partition */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (0x00011a00 * 512) +#define CONFIG_ENV_SIZE (8 * 512) + +#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */ + +/* console configuration */ +#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */ +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * One partition type must be defined for part.c + * This is necessary for the fatls command to work on an SD card + * for example. + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* version string, parser, etc */ +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP + +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* Initial upstream - boot to cmd prompt only */ +#define CONFIG_BOOTCOMMAND "" + +/* Commands */ +#define CONFIG_FAT_WRITE + +/* Fastboot and USB OTG */ +#define CONFIG_USB_FUNCTION_FASTBOOT +#define CONFIG_CMD_FASTBOOT +#define CONFIG_FASTBOOT_FLASH +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_FASTBOOT_BUF_SIZE 0x1d000000 +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE +#undef CONFIG_USB_GADGET_VBUS_DRAW +#define CONFIG_USB_GADGET_VBUS_DRAW 0 +#define CONFIG_USB_GADGET_DWC2_PHY_8_BIT +#define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY +#define CONFIG_USBID_ADDR 0x34052c46 + +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_L2CACHE_OFF + +#endif /* __BCM23550_W1D_H */ diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index e95deac737..de60bb1035 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -117,7 +117,6 @@ /* * Misc Settings */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x800000 #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h index 66339ca971..f7a45e9fdd 100644 --- a/include/configs/bf525-ucr2.h +++ b/include/configs/bf525-ucr2.h @@ -85,7 +85,6 @@ #define CONFIG_BFIN_SERIAL #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" #define CONFIG_BOOTCOMMAND "run sfboot" -#define CONFIG_BOOTDELAY 5 #define CONFIG_EXTRA_ENV_SETTINGS \ "sfboot=sf probe 1;" \ "sf read 0x1000000 0x20000 0x300000;" \ diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 74c3464c4d..cf8ef8af75 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -125,7 +125,6 @@ * USB Settings */ #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) -#define CONFIG_USB #define CONFIG_USB_MUSB_HCD #define CONFIG_USB_BLACKFIN #define CONFIG_USB_STORAGE diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index e2684735a7..c958a942ec 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -128,7 +128,6 @@ * USB Settings */ #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) -#define CONFIG_USB #define CONFIG_USB_MUSB_HCD #define CONFIG_USB_BLACKFIN #define CONFIG_USB_STORAGE diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 43a90328fe..2c7972043a 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -129,12 +129,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_LOADS_ECHO 1 -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) -# define CONFIG_BOOTDELAY -1 -#else -# define CONFIG_BOOTDELAY 5 -#endif - #define CONFIG_CMD_BOOTLDR #define CONFIG_CMD_DATE diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 70553662e7..6ad5682a19 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -129,15 +129,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_LOADS_ECHO 1 -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) -# define CONFIG_BOOTDELAY -1 -#else -# define CONFIG_BOOTDELAY 5 -#endif - -#ifdef CONFIG_BFIN_MAC -#endif - #define CONFIG_CMD_BOOTLDR #define CONFIG_CMD_DATE diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 6830e4d7c9..be28ea33ad 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -151,7 +151,6 @@ * USB Settings */ #if !defined(__ADSPBF544__) -#define CONFIG_USB #define CONFIG_USB_MUSB_HCD #define CONFIG_USB_BLACKFIN #define CONFIG_USB_STORAGE diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 88d2ae997e..502ddad96b 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -97,13 +97,6 @@ /* * Env Settings */ -#ifndef CONFIG_BOOTDELAY -# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) -# define CONFIG_BOOTDELAY -1 -# else -# define CONFIG_BOOTDELAY 5 -# endif -#endif #ifndef CONFIG_BOOTCOMMAND # define CONFIG_BOOTCOMMAND "run ramboot" #endif diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index 6a5bc126b0..e13f736a8f 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -55,7 +55,6 @@ #endif /* Boot Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyAMA0,115200" #define CONFIG_BOOTCOMMAND "bootm" diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 6eb83a05a7..dc596fae3e 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -106,7 +106,6 @@ #define CONFIG_CMD_CPLBINFO #define CONFIG_CMD_DATE -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND "run ramboot" #define CONFIG_BOOTARGS \ "root=/dev/mtdblock0 rw " \ diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index ba90830a1e..d3dc216c5f 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -155,7 +155,6 @@ * Default: boot from SPI flash. * "sfboot" is a composite command defined in extra settings */ -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTCOMMAND "run sfboot" /* diff --git a/include/configs/br4.h b/include/configs/br4.h index 402f352fc5..16e4a1d4e2 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -119,7 +119,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run nandboot" -#define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 /* diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 506ad882c8..3b10360b5e 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -214,7 +214,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS "" #define CONFIG_BOOTCOMMAND "run checkupdate; run checkbutton;" -#define CONFIG_BOOTDELAY 0 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOT_RETRY_TIME 60 /* continue boot after 60 s inactivity */ #define CONFIG_RESET_TO_RETRY diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 31fe5f6b81..b41666064c 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -65,7 +65,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 99182f4de3..0dd5e996b6 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -64,7 +64,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ "echo" diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 0fb853002c..de1999d431 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -145,7 +145,6 @@ /* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 7c087c6f5d..87e41bfaba 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -152,7 +152,6 @@ /* devices */ /* Environment information */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index c2dbd31803..50765408db 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -61,9 +61,7 @@ /* USB support */ #define CONFIG_USB_HOST -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_OMAP -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_OMAP_USB_PHY diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h index ff63d7a775..68851ee90f 100644 --- a/include/configs/cm_t54.h +++ b/include/configs/cm_t54.h @@ -108,9 +108,7 @@ #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_BOOTCOMMAND -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 509c8b42fb..0e8d4ac38b 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -149,11 +149,6 @@ /*AUTOBOOT settings - booting images automatically by u-boot after power on*/ -#define CONFIG_BOOTDELAY 5 /* used for autoboot, delay in -seconds u-boot will wait before starting defined (auto-)boot command, setting -to -1 disables delay, setting to 0 will too prevent access to u-boot command -interface: u-boot then has to reflashed */ - /* The following settings will be contained in the environment block ; if you want to use a neutral environment all those settings can be manually set in u-boot: 'set' command */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 5dffc9e186..ba8d93ce1f 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -37,7 +37,6 @@ "bootm 0xc0000;" #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_LZMA /* LZMA compression support */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 50f7c21ac2..58925952dd 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -89,7 +89,6 @@ #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.10.1 -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOARD_LATE_INIT #define CONFIG_LOADADDR 0x80008000 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index c60c644393..30c283185b 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -417,7 +417,6 @@ #ifdef CONFIG_TRAILBLAZER -#define CONFIG_BOOTDELAY 0 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -432,7 +431,6 @@ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index a06bfe05ad..4a770b0546 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -682,7 +682,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 8b3c7153f0..686760d0a5 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -54,7 +54,6 @@ #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index 660646eb91..708d5f730d 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -505,7 +505,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index af220febf4..3e4bba5587 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -278,7 +278,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS \ "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp" -#define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes" /* diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 68ff02509b..dbd2bb3b09 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -37,7 +37,6 @@ #endif #endif -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 913b9481f2..73f53d4a2b 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -179,7 +179,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyS0,115200n8" diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index 18804d43fd..1145e37639 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -117,7 +117,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 1 #undef CONFIG_BOOTARGS diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 8a0cd66cd0..0d51aeb869 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -211,8 +211,6 @@ /* USB xHCI HOST */ #define CONFIG_USB_HOST -#define CONFIG_USB_XHCI -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_OMAP #define CONFIG_USB_STORAGE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/draco.h b/include/configs/draco.h index 8aee25b96a..889178c283 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -73,6 +73,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=draco\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ @@ -82,7 +83,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "if dfubutton; then " \ @@ -94,7 +94,6 @@ "reset;" #else -#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index d32889df26..4b009223b2 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -129,7 +129,7 @@ REFLASH(dragonboard/u-boot.img, 8)\ BOOTENV #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 64c546cc82..23373cdb58 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -71,12 +71,11 @@ * - USB init fails, controller does not respond in time */ #if 0 #undef CONFIG_DM_USB -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_PCI #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif -#if !defined(CONFIG_USB_XHCI) +#if !defined(CONFIG_USB_XHCI_HCD) #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MARVELL #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/ea20.h b/include/configs/ea20.h index d4f3cfa8e9..3f8578fd58 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -137,7 +137,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 /* * U-Boot commands diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 521e3cf335..6d469a383c 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -69,7 +69,6 @@ #define CONFIG_MCFTMR -#define CONFIG_BOOTDELAY 5 #define CONFIG_SYS_LONGHELP 1 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h index bb5d7e581e..c7b0a389c9 100644 --- a/include/configs/eco5pk.h +++ b/include/configs/eco5pk.h @@ -31,7 +31,6 @@ #define MACH_TYPE_ECO5_PK 4017 #define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK -#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" #define CONFIG_AUTO_COMPLETE diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 2ac7757b0c..706ad1d2a3 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -37,7 +37,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h index 174cdf3302..f3f7549688 100644 --- a/include/configs/edb93xx.h +++ b/include/configs/edb93xx.h @@ -26,7 +26,6 @@ #endif /* Initial environment and monitor configuration options. */ -#define CONFIG_BOOTDELAY 2 #define CONFIG_CMDLINE_TAG 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 99d16b06c0..f9d4683fcb 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -115,7 +115,6 @@ #define CONFIG_SYS_FLASH_BASE 0xfff80000 /* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/espresso7420.h b/include/configs/espresso7420.h new file mode 100644 index 0000000000..c6a756d2b9 --- /dev/null +++ b/include/configs/espresso7420.h @@ -0,0 +1,34 @@ +/* + * Configuration settings for the SAMSUNG ESPRESSO7420 board. + * Copyright (C) 2016 Samsung Electronics + * Thomas Abraham <thomas.ab@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ESPRESSO7420_H +#define __CONFIG_ESPRESSO7420_H + +#include <configs/exynos7420-common.h> + +#define CONFIG_BOARD_COMMON + +#define CONFIG_ESPRESSO7420 +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 +#define CONFIG_SPL_STACK CONFIG_IRAM_END +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_END + +/* select serial console configuration */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +#define CONFIG_IDENT_STRING " for ESPRESSO7420" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + +/* DRAM Memory Banks */ +#define CONFIG_NR_DRAM_BANKS 8 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + +#endif /* __CONFIG_ESPRESSO7420_H */ diff --git a/include/configs/espt.h b/include/configs/espt.h index 3d67376498..86e726c63c 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -20,7 +20,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_ENV -#define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/etamin.h b/include/configs/etamin.h new file mode 100644 index 0000000000..4919cfe353 --- /dev/null +++ b/include/configs/etamin.h @@ -0,0 +1,257 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ETAMIN_H +#define __CONFIG_ETAMIN_H + +#include "siemens-am33x-common.h" +/* NAND specific changes for etamin due to different page size */ +#undef CONFIG_SYS_NAND_PAGE_SIZE +#undef CONFIG_SYS_NAND_OOBSIZE +#undef CONFIG_SYS_NAND_BLOCK_SIZE +#undef CONFIG_SYS_NAND_ECCPOS +#undef CONFIG_SYS_NAND_U_BOOT_OFFS +#undef CONFIG_SYS_ENV_SECT_SIZE +#undef CONFIG_ENV_OFFSET +#undef CONFIG_NAND_OMAP_ECCSCHEME +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW + +#define CONFIG_ENV_OFFSET 0x980000 +#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ + 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ + 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ + 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ + 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ + 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ + 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ + } + +#undef CONFIG_SYS_NAND_ECCSIZE +#undef CONFIG_SYS_NAND_ECCBYTES +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 26 + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 + +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +#undef CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_MAX_NAND_DEVICE 3 +#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ + CONFIG_SYS_NAND_BASE2} + +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +/* FWD Button = 27 + * SRV Button = 87 */ +#define BOARD_DFU_BUTTON_GPIO 27 +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +/* In dfu mode keep led1 on */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "button_dfu1=87\0" \ + "led0=3,0,1\0" \ + "led1=4,0,0\0" \ + "led2=5,0,1\0" \ + "led3=87,0,1\0" \ + "led4=60,0,1\0" \ + "led5=63,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + +/* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* use both define to compile a SPL compliance test */ +/* +#define CONFIG_SPL_CMT +#define CONFIG_SPL_CMT_DEBUG +*/ + +/* nedded by compliance test in read mode */ +#if defined(CONFIG_SPL_CMT) +#define CONFIG_SYS_DCACHE_OFF +#endif + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0xB80000 +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + + +#define CONFIG_DFU_MTD +#undef COMMON_ENV_DFU_ARGS +#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs};" \ + "mtdparts default;" \ + "draco_led 1;" \ + "dfu 0 mtd 0;" \ + "draco_led 0;\0" \ + +#undef DFU_ALT_INFO_NAND_V2 +#define DFU_ALT_INFO_NAND_V2 \ + "spl mtddev;" \ + "spl.backup1 mtddev;" \ + "spl.backup2 mtddev;" \ + "spl.backup3 mtddev;" \ + "u-boot mtddev;" \ + "u-boot.env0 mtddev;" \ + "u-boot.env1 mtddev;" \ + "rootfs mtddevubi" \ + +#undef MTDIDS_NAME_STR +#define MTDIDS_NAME_STR "omap2-nand_concat" +#undef MTDIDS_DEFAULT +#define MTDIDS_DEFAULT "nand2=" MTDIDS_NAME_STR + +#undef MTDPARTS_DEFAULT_V2 +#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ + "512k(spl)," \ + "512k(spl.backup1)," \ + "512k(spl.backup2)," \ + "512k(spl.backup3)," \ + "7680k(u-boot)," \ + "2048k(u-boot.env0)," \ + "2048k(u-boot.env1)," \ + "2048k(mtdoops)," \ + "-(rootfs)" + +#undef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + +#undef CONFIG_ENV_SETTINGS_NAND_V2 +#define CONFIG_ENV_SETTINGS_NAND_V2 \ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ + "fi;" \ + "if test -n ${B}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=rootfs,${ubi_off};" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + COMMON_ENV_DFU_ARGS \ + "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ + COMMON_ENV_NAND_BOOT \ + "ubi part rootfs ${ubi_off};" \ + "ubifsmount ubi0:${nand_active_ubi_vol};" \ + "ubifsload ${kloadaddr} boot/${kernel_name};" \ + "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + COMMON_ENV_NAND_CMDS + +#ifndef CONFIG_SPL_BUILD + +#define CONFIG_NAND_CS_INIT +#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 +#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 +#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e +#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 +#define CONFIG_MTD_CONCAT + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=etamin\0" \ + "ubi_off=4096\0"\ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_ETAMIN_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 94fee54ccd..bd32cdbf73 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -205,7 +205,6 @@ #define CONFIG_RBTREE /* Boot command */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index b2ff4dd927..f2ed7982b4 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -60,7 +60,6 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT /* specific .lds file */ @@ -124,7 +123,6 @@ #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 -#define CONFIG_I2C_EDID /* SPI */ #ifdef CONFIG_SPI_FLASH @@ -157,7 +155,6 @@ /* USB */ #define CONFIG_USB_STORAGE -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index 8b61a52c5a..3d81f9457d 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -13,8 +13,8 @@ #undef EXYNOS_DEVICE_SETTINGS #define EXYNOS_DEVICE_SETTINGS \ "stdin=serial,cros-ec-keyb\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" #define CONFIG_EXYNOS5_DT @@ -32,6 +32,7 @@ #define CONFIG_EXYNOS_FB #define CONFIG_EXYNOS_DP #define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK #endif /* Enable keyboard */ diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h index cd86e06668..16153eb595 100644 --- a/include/configs/exynos5420-common.h +++ b/include/configs/exynos5420-common.h @@ -48,7 +48,6 @@ */ #define CONFIG_CORE_COUNT 0x8 -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS #endif /* __CONFIG_EXYNOS5420_H */ diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h new file mode 100644 index 0000000000..9e0396208a --- /dev/null +++ b/include/configs/exynos7420-common.h @@ -0,0 +1,113 @@ +/* + * Configuration settings for the Espresso7420 board. + * Copyright (C) 2016 Samsung Electronics + * Thomas Abraham <thomas.ab@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_EXYNOS7420_COMMON_H +#define __CONFIG_EXYNOS7420_COMMON_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG /* in a SAMSUNG core */ +#define CONFIG_EXYNOS7420 /* Exynos7 Family */ +#define CONFIG_S5P + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <linux/sizes.h> + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F + +/* Size of malloc() pool before and after relocation */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20)) + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* select serial console configuration */ +#define CONFIG_BAUDRATE 115200 + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +/* Timer input clock frequency */ +#define COUNTER_FREQUENCY 24000000 + +/* Device Tree */ +#define CONFIG_DEVICE_TREE_LIST "exynos7420-espresso7420" + +/* IRAM Layout */ +#define CONFIG_IRAM_BASE 0x02100000 +#define CONFIG_IRAM_SIZE 0x58000 +#define CONFIG_IRAM_END (CONFIG_IRAM_BASE + CONFIG_IRAM_SIZE) + +/* Number of CPUs available */ +#define CONFIG_CORE_COUNT 0x8 + +/* select serial console configuration */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SILENT_CONSOLE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_CONSOLE_MUX + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE + +/* Configuration of ENV Blocks */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + +#ifndef MEM_LAYOUT_ENV_SETTINGS +#define MEM_LAYOUT_ENV_SETTINGS \ + "bootm_size=0x10000000\0" \ + "kernel_addr_r=0x42000000\0" \ + "fdt_addr_r=0x43000000\0" \ + "ramdisk_addr_r=0x43300000\0" \ + "scriptaddr=0x50000000\0" \ + "pxefile_addr_r=0x51000000\0" +#endif + +#ifndef EXYNOS_DEVICE_SETTINGS +#define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" +#endif + +#ifndef EXYNOS_FDTFILE_SETTING +#define EXYNOS_FDTFILE_SETTING +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS \ + EXYNOS_FDTFILE_SETTING \ + MEM_LAYOUT_ENV_SETTINGS + +#endif /* __CONFIG_EXYNOS7420_COMMON_H */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 7400870b21..824aca45b6 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -81,7 +81,6 @@ #define CONFIG_NET_RETRY_COUNT 100 -#define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 1304879876..4de2460bc0 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -36,7 +36,6 @@ #define CONFIG_SUPPORT_EMMC_BOOT -#define CONFIG_BOOTDELAY 1 #include "mx6_common.h" #include <linux/sizes.h> @@ -60,13 +59,14 @@ #define CONFIG_MXC_OCOTP /* SATA Configs */ -#define CONFIG_CMD_SATA +#ifdef CONFIG_CMD_SATA #define CONFIG_DWC_AHSATA #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_DWC_AHSATA_PORT_ID 0 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 #define CONFIG_LIBATA +#endif /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -78,6 +78,7 @@ #define CONFIG_DOS_PARTITION /* USB Configs */ +#ifdef CONFIG_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE @@ -99,8 +100,10 @@ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 #define CONFIG_G_DNL_MANUFACTURER "Advantech" +#endif /* Networking Configs */ +#ifdef CONFIG_NET #define CONFIG_FEC_MXC #define CONFIG_MII #define IMX_FEC_BASE ENET_BASE_ADDR @@ -109,6 +112,7 @@ #define CONFIG_FEC_MXC_PHYADDR 4 #define CONFIG_PHYLIB #define CONFIG_PHY_ATHEROS +#endif /* Serial Flash */ #ifdef CONFIG_CMD_SF @@ -221,29 +225,37 @@ "bootm; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "usb start; " \ - "setenv dev usb; " \ - "setenv devnum 0; " \ - "setenv rootdev sda1; " \ - "run tryboot; " \ - \ +#define CONFIG_MMCBOOTCOMMAND \ "setenv dev mmc; " \ - "setenv rootdev mmcblk0p1; " \ + "setenv rootdev mmcblk0p${partnum}; " \ \ "setenv devnum ${sddev}; " \ "if mmc dev ${devnum}; then " \ "run tryboot; " \ - "setenv rootdev mmcblk1p1; " \ + "setenv rootdev mmcblk1p${partnum}; " \ "fi; " \ \ "setenv devnum ${emmcdev}; " \ "if mmc dev ${devnum}; then " \ "run tryboot; " \ "fi; " \ + +#define CONFIG_USBBOOTCOMMAND \ + "usb start; " \ + "setenv dev usb; " \ + "setenv devnum 0; " \ + "setenv rootdev sda${partnum}; " \ + "run tryboot; " \ \ + CONFIG_MMCBOOTCOMMAND \ "bmode usb; " \ +#ifdef CONFIG_CMD_USB +#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND +#else +#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND +#endif + #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ @@ -293,13 +305,14 @@ #define CONFIG_SYS_FSL_USDHC_NUM 3 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE + /* Framebuffer */ -#define CONFIG_VIDEO +#ifdef CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_SPLASH_SCREEN_ALIGN @@ -309,6 +322,7 @@ #define CONFIG_IPUV3_CLK 260000000 #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP +#endif #define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index e6b7953c92..8b573545cd 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -65,7 +65,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index 956c0e27bd..4e7819912d 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -67,7 +67,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index 908d545070..36acf01631 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -46,7 +46,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index 83f1d73087..f1afdedb3c 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -74,7 +74,6 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 1 /* * After booting the board for the first time, new ethernet addresses diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 6a889015a3..c2656fbeb2 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -58,7 +58,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 0ebded6bd2..59adbdc102 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -53,7 +53,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index e11629cc55..982ddba39c 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -18,7 +18,6 @@ /* Falcon Mode */ #define CONFIG_CMD_SPL #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 #define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) @@ -33,6 +32,7 @@ #include "imx6_spl.h" /* common IMX6 SPL configuration */ #include "mx6_common.h" +#undef CONFIG_SPL_EXT_SUPPORT #define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */ @@ -52,9 +52,6 @@ #define CONFIG_DM_THERMAL #endif -/* GPIO */ -#define CONFIG_MXC_GPIO - /* Thermal */ #define CONFIG_IMX_THERMAL @@ -204,6 +201,7 @@ /* Miscellaneous configurable options */ #define CONFIG_HWCONFIG +#define CONFIG_PREBOOT /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -284,37 +282,45 @@ \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ + "disk=0\0" \ + "part=1\0" \ \ "fdt_high=0xffffffff\0" \ "fdt_addr=0x18000000\0" \ "initrd_high=0xffffffff\0" \ + "fixfdt=" \ + "fdt addr ${fdt_addr}\0" \ "bootdir=boot\0" \ "loadfdt=" \ "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \ "echo Loaded DTB from ${bootdir}/${fdt_file}; " \ + "run fixfdt; " \ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \ "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \ + "run fixfdt; " \ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \ "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \ + "run fixfdt; " \ "fi\0" \ \ + "fs=ext4\0" \ "script=6x_bootscript-ventana\0" \ "loadscript=" \ "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \ - "source; " \ + "source ${loadaddr}; " \ "fi\0" \ \ "uimage=uImage\0" \ - "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \ + "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \ "mmc_boot=" \ - "setenv fsload 'ext2load mmc 0:1'; " \ - "mmc dev 0 && mmc rescan && " \ + "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \ + "mmc dev ${disk} && mmc rescan && " \ "setenv dtype mmc; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/mmcblk0p1 rootfstype=ext4 " \ + "root=/dev/mmcblk0p1 rootfstype=${fs} " \ "rootwait rw ${video} ${extra}; " \ - "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "if run loadfdt; then " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ "bootm; " \ @@ -322,26 +328,28 @@ "fi\0" \ \ "sata_boot=" \ - "setenv fsload 'ext2load sata 0:1'; sata init && " \ + "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \ + "sata init && " \ "setenv dtype sata; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/sda1 rootfstype=ext4 " \ + "root=/dev/sda1 rootfstype=${fs} " \ "rootwait rw ${video} ${extra}; " \ - "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "if run loadfdt; then " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ "bootm; " \ "fi; " \ "fi\0" \ "usb_boot=" \ - "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \ + "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \ + "usb start && usb dev ${disk} && " \ "setenv dtype usb; run loadscript; " \ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/sda1 rootfstype=ext4 " \ + "root=/dev/sda1 rootfstype=${fs} " \ "rootwait rw ${video} ${extra}; " \ - "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "if run loadfdt; then " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ "bootm; " \ @@ -404,7 +412,7 @@ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ "setenv bootargs console=${console},${baudrate} " \ "root=${root} ${video} ${extra}; " \ - "if run loadfdt && fdt addr ${fdt_addr}; then " \ + "if run loadfdt; then " \ "ubifsumount; " \ "bootm ${loadaddr} - ${fdt_addr}; " \ "else " \ diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 3d510d6d88..3e419c6445 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -135,7 +135,6 @@ #define CONFIG_USB_DEV_PULLUP_GPIO 33 /* USB VBUS GPIO 3 */ -#define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTCOMMAND \ "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \ "if bootp ; then setenv downloaded 1 ; fi ; done ; " \ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 9f02a654c3..6a8660b088 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -621,7 +621,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_HOSTNAME hrcon #define CONFIG_ROOTPATH "/opt/nfsroot" diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 04515ba80a..b750d72d35 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -25,7 +25,6 @@ #define CONFIG_BOOT_RETRY_TIME 900 #define CONFIG_BOOT_RETRY_MIN 30 -#define CONFIG_BOOTDELAY 1 #define CONFIG_RESET_TO_RETRY #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index b8ee44d868..80628ddaf3 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -175,7 +175,6 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND -#define CONFIG_BOOTDELAY 5 #define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 94fc077539..50dfc11523 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -54,7 +54,6 @@ ***********************************************************/ #define CONFIG_CMD_EEPROM -#define CONFIG_BOOTDELAY 3 #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \ "1536k(kernel),-(root)" diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 0d4f2925cd..3420a39ade 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -92,7 +92,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index a5a8819727..e7d058f7a8 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -31,7 +31,6 @@ /* * Command line configuration. */ -#define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty" #define CONFIG_BOOTCOMMAND "" diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index af69ad99c4..d0b6af8cad 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -31,7 +31,6 @@ /* * Command line configuration. */ -#define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0" #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index b2a6e7fb05..b36b75dfb6 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -223,7 +223,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 2 #define CONFIG_EXTRA_ENV_SETTINGS \ "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \ "root=/dev/mtdblock5 rw noinitrd " \ diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index 55ed6569ef..eb4e3aea38 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -115,7 +115,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 062820305d..65f53b7612 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -92,7 +92,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 07f975bb37..7eaab875f2 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -21,7 +21,7 @@ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \ - "name_fdt=k2e-evm.dtb\0" \ + "name_fdt=keystone-k2e-evm.dtb\0" \ "name_mon=skern-k2e.bin\0" \ "name_ubi=k2e-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2e-evm.gph\0" \ diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index 3f98510268..f8bba6710d 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -26,7 +26,7 @@ "addr_mon=0x0c040000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \ - "name_fdt=k2g-evm.dtb\0" \ + "name_fdt=keystone-k2g-evm.dtb\0" \ "name_mon=skern-k2g.bin\0" \ "name_ubi=k2g-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2g-evm.gph\0" \ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index a268a86736..0256f0e567 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -21,7 +21,7 @@ "addr_mon=0x0c5f0000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \ - "name_fdt=k2hk-evm.dtb\0" \ + "name_fdt=keystone-k2hk-evm.dtb\0" \ "name_mon=skern-k2hk.bin\0" \ "name_ubi=k2hk-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2hk-evm.gph\0" \ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index f366e6703d..2322ab288d 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -21,7 +21,7 @@ "addr_mon=0x0c140000\0" \ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0" \ - "name_fdt=k2l-evm.dtb\0" \ + "name_fdt=keystone-k2l-evm.dtb\0" \ "name_mon=skern-k2l.bin\0" \ "name_ubi=k2l-evm-ubifs.ubi\0" \ "name_uboot=u-boot-spi-k2l-evm.gph\0" \ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 9f76034e61..6f2773b88c 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -21,7 +21,6 @@ #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ /* diff --git a/include/configs/kwb.h b/include/configs/kwb.h index bcb9e7e8be..2bddc6b7df 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -103,7 +103,6 @@ BUR_COMMON_ENV \ #define CONFIG_BOOTCOMMAND \ "run usbscript;" -#define CONFIG_BOOTDELAY 0 /* undefine command which we not need here */ #undef CONFIG_BOOTM_NETBSD diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 710629b6bd..1b4c7d4388 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -31,7 +31,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200" -#define CONFIG_BOOTDELAY 3 #define CONFIG_VERSION_VARIABLE #undef CONFIG_SHOW_BOOT_PROGRESS diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 1aad97d970..f52750e591 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -168,7 +168,6 @@ #define CONFIG_SERIAL_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SETUP_INITRD_TAG -#define CONFIG_BOOTDELAY 0 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTCOMMAND \ "if mmc rescan; then " \ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h new file mode 100644 index 0000000000..fba2facfbd --- /dev/null +++ b/include/configs/ls1012a_common.h @@ -0,0 +1,144 @@ +/* + * Copyright 2016 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012A_COMMON_H +#define __LS1012A_COMMON_H + +#define CONFIG_FSL_LAYERSCAPE +#define CONFIG_FSL_LSCH2 +#define CONFIG_LS1012A +#define CONFIG_GICV2 + +#define CONFIG_SYS_HAS_SERDES + +#include <asm/arch/config.h> +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SUPPORT_RAW_INITRD + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +#define CONFIG_SYS_TEXT_BASE 0x40100000 + +#define CONFIG_SYS_FSL_CLK +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 125000000 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F 1 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ/4 /* 25MHz */ + +/* CSU */ +#define CONFIG_LAYERSCAPE_NS_ACCESS + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*SPI device */ +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 1000000 +#define CONFIG_ENV_SPI_MODE 0x03 +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_FSL_SPI_INTERFACE +#define CONFIG_SF_DATAFLASH + +#define CONFIG_FSL_QSPI +#define QSPI0_AMBA_BASE 0x40000000 +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_BAR + +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +/* + * Environment + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x40000 /* 256KB */ +#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ +#define CONFIG_ENV_SECT_SIZE 0x40000 +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Command line configuration */ +#define CONFIG_CMD_ENV +#undef CONFIG_CMD_IMLS + +#define CONFIG_ARCH_EARLY_INIT_R + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 128 + +#define CONFIG_DISPLAY_CPUINFO + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "initrd_high=0xffffffff\0" \ + "verify=no\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0xa00000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "console=ttyAMA0,38400n8\0" + +#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ + "earlycon=uart8250,mmio,0x21c0500" +#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ + "$kernel_start $kernel_size && "\ + "bootm $kernel_load" + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 64 /* max command args */ + +#define CONFIG_PANIC_HANG +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#include <asm/fsl_secure_boot.h> + +#endif /* __LS1012A_COMMON_H */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h new file mode 100644 index 0000000000..ad81142dcd --- /dev/null +++ b/include/configs/ls1012afrdm.h @@ -0,0 +1,42 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012ARDB_H__ +#define __LS1012ARDB_H__ + +#include "ls1012a_common.h" + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x04180000 +#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x84180000 + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* +* USB +*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE +#endif + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h new file mode 100644 index 0000000000..fcf402c836 --- /dev/null +++ b/include/configs/ls1012aqds.h @@ -0,0 +1,189 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012AQDS_H__ +#define __LS1012AQDS_H__ + +#include "ls1012a_common.h" + + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000 +#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000 + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_BRDCFG_REG 0x04 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0xf7 +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x08 +#define QIXIS_RST_CTL_RESET 0x41 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#endif + +/* + * I2C bus multiplexer + */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ +#define I2C_RETIMER_ADDR 0x18 +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_CH7301 0xC +#define I2C_MUX_CH5 0xD +#define I2C_MUX_CH7 0xF + +#define I2C_MUX_CH_VOL_MONITOR 0xa + +/* +* RTC configuration +*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CONFIG_CMD_DATE + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* DSPI */ +#define CONFIG_FSL_DSPI1 +#define CONFIG_DEFAULT_SPI_BUS 1 + +#define CONFIG_CMD_SPI +#define MMAP_DSPI DSPI1_BASE_ADDR + +#define CONFIG_SYS_DSPI_CTAR0 1 + +#define CONFIG_SYS_DSPI_CTAR1 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_SST /* cs1 */ + +#define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ + +#define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ + DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(0)) +#define CONFIG_SPI_FLASH_EON /* cs3 */ + +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 + +/* +* USB +*/ +/* EHCI Support - disbaled by default */ +/*#define CONFIG_HAS_FSL_DR_USB*/ + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif + +/*XHCI Support - enabled by default*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE +#endif + +/* MMC */ +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#endif + +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_CMD_SCSI +#define CONFIG_DOS_PARTITION +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_SATA AHCI_BASE_ADDR + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" + +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#define CONFIG_MISC_INIT_R + +#endif /* __LS1012AQDS_H__ */ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h new file mode 100644 index 0000000000..6046ab7895 --- /dev/null +++ b/include/configs/ls1012ardb.h @@ -0,0 +1,105 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012ARDB_H__ +#define __LS1012ARDB_H__ + +#include "ls1012a_common.h" + + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define CONFIG_SYS_MMDC_CORE_CONTROL_1 0x05180000 +#define CONFIG_SYS_MMDC_CORE_CONTROL_2 0x85180000 + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +/* +* USB +*/ +#define CONFIG_HAS_FSL_XHCI_USB + +#ifdef CONFIG_HAS_FSL_XHCI_USB +#define CONFIG_USB_XHCI_FSL +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE +#endif + +/* + * I2C IO expander + */ + +#define I2C_MUX_IO1_ADDR 0x24 +#define __SW_BOOT_MASK 0xFC +#define __SW_BOOT_EMU 0x10 +#define __SW_BOOT_BANK1 0x00 +#define __SW_BOOT_BANK2 0x01 +#define __SW_REV_MASK 0x07 +#define __SW_REV_A 0xF8 +#define __SW_REV_B 0xF0 + +/* MMC */ +#define CONFIG_MMC +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#endif + +/* SATA */ +#define CONFIG_LIBATA +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_CMD_SCSI +#define CONFIG_DOS_PARTITION +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_SATA AHCI_BASE_ADDR + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */ +#define FSL_PCIE_COMPAT "fsl,ls1043a-pcie" + +#define CONFIG_SYS_PCI_64BIT + +#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF 0x00000000 +#define CONFIG_SYS_PCIE_CFG0_SIZE 0x00001000 /* 4k */ +#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF 0x00001000 +#define CONFIG_SYS_PCIE_CFG1_SIZE 0x00001000 /* 4k */ + +#define CONFIG_SYS_PCIE_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE_IO_PHYS_OFF 0x00010000 +#define CONFIG_SYS_PCIE_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_SYS_PCIE_MEM_BUS 0x08000000 +#define CONFIG_SYS_PCIE_MEM_PHYS_OFF 0x04000000 +#define CONFIG_SYS_PCIE_MEM_SIZE 0x80000000 /* 128M */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI + +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index f605ca6280..db684d2558 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -450,8 +450,6 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 -#define CONFIG_USB_XHCI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif @@ -569,7 +567,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_QE_FW_ADDR 0x600c0000 diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 32d2acc0cd..0fb28eff55 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -57,8 +57,6 @@ #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 -#define CONFIG_USB_XHCI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif @@ -418,7 +416,6 @@ #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_BOOTDELAY 3 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index a7d49ed6e8..b0d4a8d10a 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -264,7 +264,6 @@ #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #endif -#define CONFIG_BOOTDELAY 10 /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index af1f73dbaa..a19eaee5a9 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -388,9 +388,7 @@ unsigned long get_board_ddr_clk(void); /* USB */ #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index aca8d95c15..94ddfb1797 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -278,9 +278,7 @@ /* USB */ #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index c78aeb57ed..ebe1415421 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -29,11 +29,13 @@ #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ /* Link Definitions */ +#ifndef CONFIG_QSPI_BOOT #ifdef CONFIG_SPL #define CONFIG_SYS_TEXT_BASE 0x80400000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif #ifdef CONFIG_EMU #define CONFIG_SYS_NO_FLASH @@ -138,13 +140,6 @@ #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 -#ifndef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_QUIET_TEST -#endif - #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); #endif @@ -255,7 +250,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" -#define CONFIG_BOOTDELAY 10 /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -290,7 +284,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (640 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 7563aafbc6..7f245b5fad 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -30,6 +30,13 @@ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#endif + /* * NOR Flash Timing Params */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 4b27114863..df1455bef3 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -17,6 +17,16 @@ unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SYS_FSL_CLK + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT +#define CONFIG_SYS_I2C_IFDR_DIV 0x7e +#endif + +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) @@ -162,11 +172,13 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 #define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_QSPI 0x0f #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RCW_SRC_NAND 0x107 +#define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_FORCE_MEM 0x01 #define CONFIG_SYS_CSPR3_EXT (0x0) @@ -227,7 +239,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024) -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024) #else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY @@ -257,11 +269,19 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x20010000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif +#endif /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR @@ -279,8 +299,27 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH + +#ifdef CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#endif + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 26) /* 64MB */ +#define FSL_QSPI_FLASH_NUM 4 +#endif +/* + * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. + * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 + * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1 + */ +#define FSL_QIXIS_BRDCFG9_QSPI 0x1 + #endif /* @@ -383,9 +422,7 @@ unsigned long get_board_ddr_clk(void); * USB */ #define CONFIG_HAS_FSL_XHCI_USB -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 3baca643d5..86a49a5cd8 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -316,9 +316,7 @@ unsigned long get_board_sys_clk(void); * USB */ #define CONFIG_HAS_FSL_XHCI_USB -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_FSL -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index d5082fa4cc..0abfb00ef0 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -340,7 +340,6 @@ "" #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 428128d297..e7fd6395e0 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -130,7 +130,6 @@ #endif /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_BOOTCOMMAND "run mmc_mmc" diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 4349357b54..781a1623dd 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -226,7 +226,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttymxc1,115200" #define CONFIG_LOADADDR 0x70800000 diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index fb144637d5..b4bd6b0e1e 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -128,7 +128,6 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttyS3,115200" #define CONFIG_LOADADDR 0x20800000 diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index 8d4a8cd0c2..937febea21 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -37,7 +37,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 3dbd9204af..0c6e1117d4 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -149,7 +149,6 @@ #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ /* Environment information */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 9262f72085..4211e72dba 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -362,7 +362,6 @@ #define CONFIG_LOADADDR 400000 /* def. location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_PREBOOT "echo;" \ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index f71b66245f..fbcad4ac80 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -69,7 +69,6 @@ #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 801d674610..93fb166665 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -239,7 +239,6 @@ /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0 -#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME XILINX_BOARD_NAME #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 62919e9cf9..2a83c608b1 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -63,7 +63,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #undef CONFIG_BOOTARGS #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index e0c9a98de7..3cdd0dcf62 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -516,7 +516,6 @@ #define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 66e1a45e16..57cb7956a4 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -474,7 +474,6 @@ #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index f983f2d1b5..27e9c0a8f3 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -16,7 +16,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 025a4a6698..c0fb16d095 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -23,7 +23,6 @@ #define CONFIG_CONS_SCIF1 1 #define CONFIG_BOARD_LATE_INIT -#define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,38400" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h index 3073db9ff8..29564d758b 100644 --- a/include/configs/mt_ventoux.h +++ b/include/configs/mt_ventoux.h @@ -22,7 +22,6 @@ #define MACH_TYPE_AM3517_MT_VENTOUX 3832 #define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX -#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" #define CONFIG_AUTO_COMPLETE diff --git a/include/configs/munices.h b/include/configs/munices.h index efbd44779e..3e4c062dbf 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #undef CONFIG_BOOTARGS #define CONFIG_PREBOOT "echo;" \ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 6d4bbd1f9a..62f4937c66 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -57,7 +57,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200,230400, 460800, 921600 } /* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ #define CONFIG_PREBOOT /* diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 1bdbe4bba9..774725871a 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -57,7 +57,6 @@ #endif /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index 542f1f42b8..3f9bb0ab46 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -56,7 +56,6 @@ #endif /* Boot Linux */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index c63887bb8c..ea0d605fe3 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -117,7 +117,6 @@ /* Ethernet Configs */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index b3c03b3bb3..068596f397 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -137,7 +137,6 @@ #endif /* Boot Linux */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index b9992deaab..8de9dec66f 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -64,7 +64,6 @@ ***********************************************************/ #define CONFIG_CMD_DATE -#define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3f63007819..a81dd784c9 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -84,7 +84,6 @@ #define CONFIG_BOARD_LATE_INIT -#define CONFIG_BOOTDELAY 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index aed0939ce6..1d1178798e 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -91,7 +91,6 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION -#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 23b8b46d8c..93ad048b11 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -120,7 +120,6 @@ #define CONFIG_CMD_DATE -#define CONFIG_BOOTDELAY 1 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index e697261248..0419050354 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -70,7 +70,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "smc911x" diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index feb5580239..5e1c5977ea 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -77,7 +77,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 8743ddce68..1b580f04c7 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -87,7 +87,6 @@ /* Command definition */ #define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_BOOTDELAY 1 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 9c76678b1c..632ebba35c 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -64,7 +64,6 @@ #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 17b6c48c1c..fb49322f3b 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -59,10 +59,6 @@ #endif #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 3 -#endif - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 3c9a794f81..fbc6de6283 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -34,10 +34,6 @@ #define CONFIG_LOADADDR 0x80800000 #define CONFIG_SYS_TEXT_BASE 0x87800000 -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 3 -#endif - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 0fbbce6d02..cd154a4bbb 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -379,7 +379,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); "run attachboot;" \ "echo" -#define CONFIG_BOOTDELAY 30 #define CONFIG_MENU #define CONFIG_MENU_SHOW diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 16fa046687..891378420e 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -90,7 +90,6 @@ #error "CONFIG_SYS_TEXT_BASE value is invalid" #endif -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "run master" diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 3f777b6aeb..82e0d5000c 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -73,10 +73,6 @@ #define CONFIG_NAND_OMAP_GPMC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -/* override default CONFIG_BOOTDELAY */ -#undef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 0 - #define CONFIG_EXTRA_ENV_SETTINGS \ "machid=ffffffff\0" \ "fdt_high=0x87000000\0" \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 9dbca1c6f4..1726a3ed19 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -106,7 +106,6 @@ * Default environment * ----------------------------------------------------------------------------- */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h index a93a2fa0d6..b7d8765db5 100644 --- a/include/configs/omap3_evm_quick_mmc.h +++ b/include/configs/omap3_evm_quick_mmc.h @@ -55,7 +55,6 @@ * Default environment * ----------------------------------------------------------------------------- */ -#define CONFIG_BOOTDELAY 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index bb908fad3e..da5d32517d 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -45,7 +45,6 @@ * Default environment * ----------------------------------------------------------------------------- */ -#define CONFIG_BOOTDELAY 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index f3287e3ad3..1f36d36f45 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -204,7 +204,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTARGS "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off" #define CONFIG_BOOTCOMMAND "if mmc rescan 0; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi" -#define CONFIG_BOOTDELAY 3 /* * U-Boot commands diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 71b2fa9c07..4f22d12a3f 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -944,7 +944,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 9b75afe92a..30bfbf44f5 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -468,7 +468,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h new file mode 100644 index 0000000000..257283f3b9 --- /dev/null +++ b/include/configs/p2771-0000.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2013-2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _P2771_0000_H +#define _P2771_0000_H + +#include <linux/sizes.h> + +#include "tegra186-common.h" + +/* High-level configuration options */ +#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2771-0000" + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) + +#include "tegra-common-post.h" + +/* Crystal is 38.4MHz. clk_m runs at half that rate */ +#define COUNTER_FREQUENCY 19200000 + +#endif diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index b907419a59..a649991d1a 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -31,7 +31,6 @@ #endif #endif -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 0007c50ad9..80d5d6c858 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -70,7 +70,6 @@ Serial console configuration /*----------------------------------------------------------------------------- Autobooting -----------------------------------------------------------------------------*/ -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */ /* even with bootdelay=0 */ #undef CONFIG_BOOTARGS diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 494524d065..74e22db151 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_EEPROM_BUS 2 -#define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x82000000 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 3b6c7dc111..6d03d6908e 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -448,7 +448,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 400000 -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_PREBOOT "echo;" \ "echo PDM360NG SAMPLE;" \ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 319e3b5111..49c98d81c4 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -125,7 +125,6 @@ * Board boot configuration */ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#define CONFIG_BOOTDELAY 5 #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 44ffd6d204..7d7315ea1c 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -61,7 +61,6 @@ #define CONFIG_AT91_LED #define CONFIG_GREEN_LED AT91_PIN_PD31 /* this is the user1 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 39af5c0240..0abd84a147 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -168,7 +168,6 @@ #define CONFIG_GREEN_LED GPIO_PIN_PC(13) #define CONFIG_YELLOW_LED GPIO_PIN_PC(15) -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 111e0f50cd..b8ce17e807 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -182,7 +182,6 @@ #define CONFIG_RED_LED GPIO_PIN_PB(7) /* this is the power led */ #define CONFIG_GREEN_LED GPIO_PIN_PB(8) /* this is the user1 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index facba3864d..0e944d871f 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -57,7 +57,6 @@ #define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */ #define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */ -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 9b394ddb13..6804acb0cd 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -119,7 +119,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run nandboot" -#define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 /* diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 7450a1a42a..990fd84b32 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -61,6 +61,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=pxm2\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ @@ -92,7 +93,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "if dfubutton; then " \ @@ -118,7 +118,6 @@ "reset;" #else -#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index f58fc4c377..546c508d27 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -17,7 +17,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R -#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 2190d16200..6cab719203 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -17,7 +17,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R -#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 73b377155c..0b8640223f 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -179,7 +179,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTCOMMAND \ "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0" diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 437ea92a98..c5e57244ab 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -22,7 +22,6 @@ #define CONFIG_CMD_ENV #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC3,115200" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index bf81d2b0ee..1fc919b6eb 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -22,7 +22,6 @@ #define CONFIG_CONS_SCIF1 1 #define CONFIG_BOARD_LATE_INIT -#define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 6097dc2ca8..c15580c582 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -28,7 +28,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_CONS_SCIF0 1 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC0,115200" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index 47d23791c0..55be46bcf2 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -76,6 +76,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rastaban\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ @@ -85,7 +86,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "if dfubutton; then " \ @@ -97,7 +97,6 @@ "reset;" #else -#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 337ba02a63..80313fc8c5 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -31,7 +31,6 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_BAUDRATE 38400 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 622b7c79e6..72fbf108fa 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -132,7 +132,6 @@ #define CONFIG_BOOTCOMMAND "run flash_self" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 9ef5eae304..dbbb81efa9 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -214,6 +214,5 @@ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV -#define CONFIG_BOOTDELAY 2 #endif diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index c60e233e9f..3f9fb7bc02 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -17,7 +17,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC3,115200" -#define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index b4fbc9c17d..b7f361be25 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -16,7 +16,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTARGS "console=ttySC7,115200" -#define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/rut.h b/include/configs/rut.h index bf2cc2f2bb..aea8e217d0 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -56,6 +56,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=rut\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x500000\0" \ "splashpos=m,m\0" \ "optargs=fixrtc --no-log consoleblank=0 \0" \ @@ -85,7 +86,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "if mmc rescan; then " \ @@ -107,7 +107,6 @@ "reset;" #else -#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h new file mode 100644 index 0000000000..9723bab77e --- /dev/null +++ b/include/configs/s32v234evb.h @@ -0,0 +1,260 @@ +/* + * (C) Copyright 2015-2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Configuration settings for the Freescale S32V234 EVB board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifndef CONFIG_SPL_BUILD +#include <config_distro_defaults.h> +#endif + +#include <asm/arch/imx-regs.h> + +#define CONFIG_S32V234 +#define CONFIG_DM + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Config GIC */ +#define CONFIG_GICV2 +#define GICD_BASE 0x7D001000 +#define GICC_BASE 0x7D002000 + +#define CONFIG_REMAKE_ELF +#undef CONFIG_RUN_FROM_IRAM_ONLY + +#define CONFIG_RUN_FROM_DDR1 +#undef CONFIG_RUN_FROM_DDR0 + +/* Run by default from DDR1 */ +#ifdef CONFIG_RUN_FROM_DDR0 +#define DDR_BASE_ADDR 0x80000000 +#else +#define DDR_BASE_ADDR 0xC0000000 +#endif + +#define CONFIG_MACH_TYPE 4146 + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* Config CACHE */ +#define CONFIG_CMD_CACHE + +#define CONFIG_SYS_FULL_VA + +/* Enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG + +/* SMP Spin Table Definitions */ +#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY (1000000000) /* 1000MHz */ +#define CONFIG_SYS_FSL_ERRATUM_A008585 + +/* Size of malloc() pool */ +#ifdef CONFIG_RUN_FROM_IRAM_ONLY +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1 * 1024 * 1024) +#else +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +#endif +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_DM_SERIAL +#define CONFIG_FSL_LINFLEXUART +#define LINFLEXUART_BASE LINFLEXD0_BASE_ADDR + +#define CONFIG_DEBUG_UART_LINFLEXUART +#define CONFIG_DEBUG_UART_BASE LINFLEXUART_BASE + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_UART_PORT (1) +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_CMD_IMLS + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +/* #define CONFIG_CMD_EXT2 EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_DOS_PARTITION + +#if 0 + +/* Ethernet config */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#endif + +#if 0 /* Disable until the I2C driver will be updated */ + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#if 0 /* Disable until the FLASH will be implemented */ +#define CONFIG_SYS_USE_NAND +#endif + +#ifdef CONFIG_SYS_USE_NAND +/* Nand Flash Configs */ +#define CONFIG_CMD_NAND +#define CONFIG_JFFS2_NAND +#define MTD_NAND_FSL_NFC_SWECC 1 +#define CONFIG_NAND_FSL_NFC +#define CONFIG_SYS_NAND_BASE 0x400E0000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +#define CONFIG_CMD_DHCP + +#define CONFIG_LOADADDR 0xC307FFC0 +#define CONFIG_BOOTARGS "console=ttyLF0 root=/dev/ram rw" + +#define CONFIG_CMD_ENV +#define CONFIG_EXTRA_ENV_SETTINGS \ + "boot_scripts=boot.scr.uimg boot.scr\0" \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + "console=ttyLF0,115200\0" \ + "fdt_file=s32v234-evb.dtb\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_addr_r=0xC2000000\0" \ + "kernel_addr_r=0xC307FFC0\0" \ + "ramdisk_addr_r=0xC4000000\0" \ + "ramdisk=rootfs.uimg\0"\ + "ip_dyn=yes\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \ + "jtagboot=echo Booting using jtag...; " \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \ + "run loaduimage; run loadramdisk; run loadfdt;"\ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "boot_net_usb_start=true\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) + +#define CONFIG_BOOTCOMMAND \ + "run distro_bootcmd" + +#include <config_distro_bootcmd.h> + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "=> " +#undef CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START (DDR_BASE_ADDR) +#define CONFIG_SYS_MEMTEST_END (DDR_BASE_ADDR + 0x7C00000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_TEXT_BASE 0x3E800000 /* SDRAM */ + +#ifdef CONFIG_RUN_FROM_IRAM_ONLY +#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR) +#endif + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +#if 0 +/* Configure PXE */ +#define CONFIG_CMD_PXE +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 +#endif + +/* Physical memory map */ +/* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM (DDR_BASE_ADDR) +#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_IS_IN_MMC + +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#endif diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index bdb368ed33..99153067b2 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -217,9 +217,6 @@ int universal_spi_read(void); /* * LCD Settings */ -#define CONFIG_EXYNOS_FB -#define CONFIG_LCD -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_LD9040 #define CONFIG_VIDEO_BMP_GZIP diff --git a/include/configs/sansa_fuze_plus.h b/include/configs/sansa_fuze_plus.h index 0c8ecc181b..d58b9637f1 100644 --- a/include/configs/sansa_fuze_plus.h +++ b/include/configs/sansa_fuze_plus.h @@ -28,7 +28,6 @@ #define CONFIG_ENV_OVERWRITE /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_LOADADDR 0x42000000 diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 6c0932a8df..567c4d588b 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -641,7 +641,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 800000 -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index bbd1a63344..46766a6779 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -579,7 +579,6 @@ #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index c9970f1f3e..248785db38 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -527,7 +527,6 @@ /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index 42237d373e..b490b62c2d 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -52,7 +52,6 @@ #endif /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyAMA0,115200" #define CONFIG_BOOTCOMMAND "bootm" diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index 80997a49bd..fb6e05fafc 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -24,7 +24,6 @@ #define CONFIG_MAC_PARTITION #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h index 248435b9d1..64e9e52e70 100644 --- a/include/configs/sh7753evb.h +++ b/include/configs/sh7753evb.h @@ -24,7 +24,6 @@ #define CONFIG_MAC_PARTITION #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index 547b500308..f9a9a03ef4 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -24,7 +24,6 @@ #define CONFIG_MAC_PARTITION #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=/dev/nfs ip=dhcp" #define CONFIG_VERSION_VARIABLE diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 9f1e6d7fee..538ba98ae5 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -20,7 +20,6 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_JFFS2 -#define CONFIG_BOOTDELAY -1 #define CONFIG_BOOTARGS "console=ttySC2,115200 root=1f01" #define CONFIG_ENV_OVERWRITE 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index bd4c6bd13a..794c48c49a 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -22,7 +22,6 @@ #define CONFIG_MAC_PARTITION #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp" #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index dfc928d33b..eab665c286 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -102,8 +102,10 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ /* NS16550 Configuration */ +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) +#endif #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 #define CONFIG_SYS_NS16550_COM4 0x481a6000 @@ -159,6 +161,7 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -288,6 +291,8 @@ #define CONFIG_LZO #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS +#define CONFIG_MTD_UBI_FASTMAP +#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1 #endif /* Commen environment */ @@ -419,7 +424,7 @@ "setenv nand_src_addr ${nand_src_addr_B};" \ "fi;" \ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=9,2048;" \ + "ubi.mtd=9,${ubi_off};" \ "setenv bootargs ${bootargs} " \ "root=${nand_root} noinitrd ${mtdparts} " \ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ @@ -511,7 +516,7 @@ COMMON_ENV_DFU_ARGS \ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ COMMON_ENV_NAND_BOOT \ - "ubi part rootfs 2048;" \ + "ubi part rootfs ${ubi_off};" \ "ubifsmount ubi0:${nand_active_ubi_vol};" \ "ubifsload ${kloadaddr} boot/${kernel_name};" \ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 40b0cd2132..fc4153aba8 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -178,7 +178,6 @@ #endif /* General Boot Parameter */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index c5c0c2cb96..f733c35024 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -80,7 +80,6 @@ #define CONFIG_CMDLINE_EDITING /* autoboot */ -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index f66bb121f3..92a08332a3 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -13,6 +13,9 @@ #include <configs/exynos5-dt-common.h> #include <configs/exynos5-common.h> +#undef CONFIG_LCD +#undef CONFIG_EXYNOS_FB +#undef CONFIG_EXYNOS_DP #undef CONFIG_KEYBOARD #define CONFIG_BOARD_COMMON diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 9cf886c066..a46ca74166 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -13,6 +13,10 @@ #include <configs/exynos5-dt-common.h> #include <configs/exynos5-common.h> +#undef CONFIG_LCD +#undef CONFIG_EXYNOS_FB +#undef CONFIG_EXYNOS_DP + #undef CONFIG_KEYBOARD #define CONFIG_BOARD_COMMON @@ -31,7 +35,6 @@ #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" /* USB */ -#define CONFIG_USB_XHCI #define CONFIG_USB_XHCI_EXYNOS /* DRAM Memory Banks */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 0f1a1ecc29..fe41d17149 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -71,7 +71,6 @@ #define CONFIG_CMD_ONENAND #define CONFIG_CMD_MTDPARTS -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 16aefc25b4..7981a8d80b 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -117,7 +117,6 @@ /* Boot options */ #define CONFIG_SYS_LOAD_ADDR 0x23000000 -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h new file mode 100644 index 0000000000..ddfbcec980 --- /dev/null +++ b/include/configs/snapper9g45.h @@ -0,0 +1,155 @@ +/* + * Bluewater Systems Snapper 9G45 module + * + * (C) Copyright 2011 Bluewater Systems + * Author: Andre Renaud <andre@bluewatersys.com> + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* SoC type is defined in boards.cfg */ +#include <asm/hardware.h> +#include <linux/sizes.h> + +#define CONFIG_SYS_TEXT_BASE 0x73f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 + +/* CPU */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 +#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */ +#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + +/* Mem test settings */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + (1024 * 1024)) + +/* NAND Flash */ +#define CONFIG_NAND_ATMEL +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_SYS_NAND_ECC_BASE ATMEL_BASE_ECC +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */ +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R +#define CONFIG_AT91_WANTS_COMMON_PHY +#define CONFIG_TFTP_PORT +#define CONFIG_TFTP_TSIZE + +/* USB */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#define CONFIG_DOS_PARTITION +#define CONFIG_USB_STORAGE +#define CONFIG_PARTITION_UUIDS + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI + +/* LCD */ +#define CONFIG_ATMEL_LCD +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_GURNARD_SPLASH + +#define CONFIG_ATMEL_SPI + +/* GPIOs and IO expander */ +#define CONFIG_ATMEL_LEGACY +#define CONFIG_AT91_GPIO +#define CONFIG_AT91_GPIO_PULLUP 1 + +/* UARTs/Serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_BAUDRATE 115200 + +/* Boot options */ +#define CONFIG_SYS_LOAD_ADDR 0x23000000 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Environment settings */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (512 << 10) +#define CONFIG_ENV_SIZE (256 << 10) +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ethaddr=00:00:00:00:00:00\0" \ + "serial=0\0" \ + "stdout=serial_atmel\0" \ + "stderr=serial_atmel\0" \ + "stdin=serial_atmel\0" \ + "bootlimit=3\0" \ + "loadaddr=0x71000000\0" \ + "board_rev=2\0" \ + "bootfile=/tftpboot/uImage\0" \ + "bootargs_def=console=ttyS0,115200 panic=5 quiet lpj=997376\0" \ + "nfsroot=/export/root\0" \ + "boot_working=setenv bootargs $bootargs_def; nboot $loadaddr 0 0x20c0000 && bootm\0" \ + "boot_safe=setenv bootargs $bootargs_def; nboot $loadaddr 0 0xc0000 && bootm\0" \ + "boot_tftp=setenv bootargs $bootargs_def ip=any nfsroot=$nfsroot; setenv autoload y && bootp && bootm\0" \ + "boot_usb=setenv bootargs $bootargs_def; usb start && usb storage && fatload usb 0:1 $loadaddr dds-xm200.bin && bootm\0" \ + "boot_mmc=setenv bootargs $bootargs_def; mmc rescan && fatload mmc 0:1 $loadaddr dds-xm200.bin && bootm\0" \ + "bootcmd=run boot_mmc ; run boot_usb ; run boot_working ; run boot_safe\0" \ + "altbootcmd=run boot_mmc ; run boot_usb ; run boot_safe ; run boot_working\0" + +/* Console settings */ +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* U-Boot memory settings */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) + +/* Command line configuration */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_PART + +#endif /* __CONFIG_H */ diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h index ca7f8a28b2..3b0b41612d 100644 --- a/include/configs/socfpga_arria5_socdk.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "zImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h index a2da7d47c5..7ced6a68a6 100644 --- a/include/configs/socfpga_cyclone5_socdk.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "zImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index fdddfa3cd2..6b9546e8f7 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h new file mode 100644 index 0000000000..6f5dfce3be --- /dev/null +++ b/include/configs/socfpga_is1.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * Copyright (C) 2016 Pavel Machek <pavel@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_SOCFPGA_IS1_H__ +#define __CONFIG_SOCFPGA_IS1_H__ + +#include <asm/arch/base_addr_ac5.h> + +/* U-Boot Commands */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_HW_WATCHDOG + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x10000000 + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_ENV_IS_IN_SPI_FLASH + +/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_ARP_TIMEOUT 500UL + +/* PHY */ +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#endif + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +/* + * Bootcounter + */ +#define CONFIG_BOOTCOUNT_LIMIT +/* last 2 lwords in OCRAM */ +#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 +#define CONFIG_SYS_BOOTCOUNT_BE + +#endif /* __CONFIG_SOCFPGA_IS1_H__ */ diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index f0fb43a82f..d1b31c4cfa 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_PREBOOT "run try_bootscript" diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index 675f5d16e9..3fceb31df9 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h index 79c16ce91d..c9473df912 100644 --- a/include/configs/socfpga_socrates.h +++ b/include/configs/socfpga_socrates.h @@ -18,7 +18,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCrates */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "zImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index c097f47edd..286e746a14 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -20,7 +20,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 1ccde1a76f..1c7d45e4a8 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -21,7 +21,6 @@ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on VINING_FPGA */ /* Booting Linux */ -#define CONFIG_BOOTDELAY 5 #define CONFIG_BOOTFILE "openwrt-socfpga-socfpga_cyclone5_vining_fpga-fit-uImage.itb" #define CONFIG_BOOTARGS "console=ttyS0," __stringify(CONFIG_BAUDRATE) #define CONFIG_BOOTCOMMAND "run selboot" diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 4ed524b023..624cef712d 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -346,7 +346,6 @@ #define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ -#define CONFIG_BOOTDELAY 1 /* -1 disables auto-boot */ #define CONFIG_PREBOOT "echo;" \ "echo Welcome on the ABB Socrates Board;" \ diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 7b2d262b4b..43ba84ab58 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -104,12 +104,6 @@ /* * Default Environment Varible definitions */ -#if defined(CONFIG_SPEAR_USBTTY) -#define CONFIG_BOOTDELAY -1 -#else -#define CONFIG_BOOTDELAY 1 -#endif - #define CONFIG_ENV_OVERWRITE /* diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index d53f8c18a2..f05c1aacaf 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -82,9 +82,6 @@ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ "bootm 0x08044000 - 0x08042000\0" -#define CONFIG_BOOTDELAY 3 -#define CONFIG_AUTOBOOT - /* * Command line configuration. */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 9d1f02ea15..e544a218dd 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -69,7 +69,6 @@ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ "bootm 0x08044000 - 0x08042000\0" -#define CONFIG_BOOTDELAY 3 /* * Command line configuration. diff --git a/include/configs/strider.h b/include/configs/strider.h index 5803b660bc..36561e0346 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -20,8 +20,12 @@ #define CONFIG_SYS_TEXT_BASE 0xFE000000 -#ifdef CONFIG_STRIDER_CPU +#ifdef CONFIG_STRIDER_CPU_DP +#define CONFIG_IDENT_STRING " strider cpu dp 0.01" +#elif defined(CONFIG_STRIDER_CPU) #define CONFIG_IDENT_STRING " strider cpu 0.01" +#elif defined(CONFIG_STRIDER_CON_DP) +#define CONFIG_IDENT_STRING " strider con dp 0.01" #else #define CONFIG_IDENT_STRING " strider con 0.01" #endif @@ -225,15 +229,11 @@ /* * FLASH on the Local Bus */ -#if 1 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_FLASH_CFI_LEGACY #define CONFIG_SYS_FLASH_LEGACY_512Kx16 -#else -#define CONFIG_SYS_NO_FLASH -#endif #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ @@ -341,6 +341,22 @@ #define CONFIG_SYS_I2C_IHS_SPEED_3 50000 #define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F +#ifdef CONFIG_STRIDER_CON_DP +#define CONFIG_SYS_I2C_IHS_DUAL +#define CONFIG_SYS_I2C_IHS_CH0_1 +#define CONFIG_SYS_I2C_IHS_SPEED_0_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH1_1 +#define CONFIG_SYS_I2C_IHS_SPEED_1_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2_1 +#define CONFIG_SYS_I2C_IHS_SPEED_2_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH3_1 +#define CONFIG_SYS_I2C_IHS_SPEED_3_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3_1 0x7F +#endif + /* * Software (bit-bang) I2C driver configuration */ @@ -357,7 +373,7 @@ #define I2C_SOFT_DECLARATIONS4 #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F -#ifdef CONFIG_STRIDER_CON +#if defined(CONFIG_STRIDER_CON) || defined(CONFIG_STRIDER_CON_DP) #define I2C_SOFT_DECLARATIONS5 #define CONFIG_SYS_I2C_SOFT_SPEED_5 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_5 0x7F @@ -371,6 +387,20 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_8 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_8 0x7F #endif +#ifdef CONFIG_STRIDER_CON_DP +#define I2C_SOFT_DECLARATIONS9 +#define CONFIG_SYS_I2C_SOFT_SPEED_9 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_9 0x7F +#define I2C_SOFT_DECLARATIONS10 +#define CONFIG_SYS_I2C_SOFT_SPEED_10 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_10 0x7F +#define I2C_SOFT_DECLARATIONS11 +#define CONFIG_SYS_I2C_SOFT_SPEED_11 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_11 0x7F +#define I2C_SOFT_DECLARATIONS12 +#define CONFIG_SYS_I2C_SOFT_SPEED_12 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_12 0x7F +#endif #ifdef CONFIG_STRIDER_CON #define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} @@ -379,6 +409,19 @@ #define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} #define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ {12, 0x4c} } +#elif defined(CONFIG_STRIDER_CON_DP) +#define CONFIG_SYS_ICS8N3QV01_I2C {13, 14, 15, 16, 17, 18, 19, 20} +#define CONFIG_SYS_CH7301_I2C {1, 3, 5, 7} +#define CONFIG_SYS_ADV7611_I2C {1, 3, 5, 7} +#define CONFIG_SYS_DP501_I2C {1, 3, 5, 7, 2, 4, 6, 8} +#define CONFIG_STRIDER_FANS { {10, 0x4c}, {11, 0x4c}, \ + {12, 0x4c} } +#elif defined(CONFIG_STRIDER_CPU_DP) +#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} +#define CONFIG_SYS_ADV7611_I2C {1, 2, 3, 4} +#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} +#define CONFIG_STRIDER_FANS { {6, 0x4c}, {7, 0x4c}, \ + {8, 0x4c} } #else #define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} #define CONFIG_SYS_ADV7611_I2C {1, 2, 3, 4} @@ -391,6 +434,8 @@ void fpga_gpio_set(unsigned int bus, int pin); void fpga_gpio_clear(unsigned int bus, int pin); int fpga_gpio_get(unsigned int bus, int pin); +void fpga_control_set(unsigned int bus, int pin); +void fpga_control_clear(unsigned int bus, int pin); #endif #ifdef CONFIG_STRIDER_CON @@ -398,12 +443,28 @@ int fpga_gpio_get(unsigned int bus, int pin); #define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0100 : 0x0020) #define I2C_FPGA_IDX ((I2C_ADAP_HWNR > 3) ? \ (I2C_ADAP_HWNR - 4) : I2C_ADAP_HWNR) +#elif defined(CONFIG_STRIDER_CON_DP) +#define I2C_SDA_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0040 : 0x0200) +#define I2C_SCL_GPIO ((I2C_ADAP_HWNR > 3) ? 0x0020 : 0x0100) +#define I2C_FPGA_IDX (I2C_ADAP_HWNR % 4) #else #define I2C_SDA_GPIO 0x0040 #define I2C_SCL_GPIO 0x0020 #define I2C_FPGA_IDX I2C_ADAP_HWNR #endif + +#ifdef CONFIG_STRIDER_CON_DP +#define I2C_ACTIVE \ + do { \ + if (I2C_ADAP_HWNR > 7) \ + fpga_control_set(I2C_FPGA_IDX, 0x0004); \ + else \ + fpga_control_clear(I2C_FPGA_IDX, 0x0004); \ + } while (0) +#else #define I2C_ACTIVE { } +#endif + #define I2C_TRISTATE { } #define I2C_READ \ (fpga_gpio_get(I2C_FPGA_IDX, I2C_SDA_GPIO) ? 1 : 0) @@ -436,6 +497,10 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_SYS_DP501_DIFFERENTIAL #define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */ +#ifdef CONFIG_STRIDER_CON_DP +#define CONFIG_SYS_OSD_DH +#endif + /* * General PCI * Addresses are mapped 1-1. @@ -594,7 +659,6 @@ int fpga_gpio_get(unsigned int bus, int pin); #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ #define CONFIG_HOSTNAME hrcon #define CONFIG_ROOTPATH "/opt/nfsroot" diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index d3704a4e2c..bfd1bd7192 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -66,7 +66,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "go 0x40040000" /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index b33cfb86f8..94275a7183 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -100,7 +100,7 @@ * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. */ #define CONFIG_SYS_INIT_RAM_ADDR 0x10000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x08000 /* FIXME: 40 KiB ? */ +#define CONFIG_SYS_INIT_RAM_SIZE 0xA000 /* 40 KiB */ #else #define CONFIG_SYS_INIT_RAM_ADDR 0x0 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ @@ -213,8 +213,7 @@ #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ #if defined(CONFIG_MACH_SUN9I) || defined(CONFIG_MACH_SUN50I) -/* FIXME: 40 KiB instead of 32 KiB ? */ -#define LOW_LEVEL_SRAM_STACK 0x00018000 +#define LOW_LEVEL_SRAM_STACK 0x0001A000 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #else /* end of 32 KiB in sram */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index efdc70622f..73ff416aed 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -207,6 +207,8 @@ #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT @@ -219,12 +221,26 @@ #define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/ #define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK #define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 #define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +/* FAT */ +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" + +/* RAW SD card / eMMC */ +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ + /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_SYS_NAND_PAGE_COUNT 64 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 4d66dd2407..6616d7396e 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -128,7 +128,6 @@ /* devices */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT /* Environment information */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 321fb4756d..0b05289d07 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -60,7 +60,6 @@ #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 /* * Command line configuration. diff --git a/include/configs/tb100.h b/include/configs/tb100.h index 870406b208..39bb5b35da 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -79,7 +79,6 @@ /* * Environment configuration */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyS0,115200n8" #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 92d4dd8e51..7b0940a7f2 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -111,7 +111,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_TEGRA_GPIO #define CONFIG_CMD_ENTERRCM /* Defines for SPL */ diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h new file mode 100644 index 0000000000..aa7b9d038a --- /dev/null +++ b/include/configs/tegra186-common.h @@ -0,0 +1,71 @@ +/* + * Copyright 2013-2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _TEGRA186_COMMON_H_ +#define _TEGRA186_COMMON_H_ + +#include "tegra-common.h" + +/* Cortex-A57 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_STACKBASE 0x82800000 /* 40MB */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ + +#define CONFIG_SYS_TEXT_BASE 0x80080000 + +/* Generic Interrupt Controller */ +#define CONFIG_GICV2 + +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * pxefile_addr_r can be pretty much anywhere that doesn't conflict with + * something else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define CONFIG_LOADADDR 0x80080000 +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x90000000\0" \ + "pxefile_addr_r=0x90100000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "fdt_addr_r=0x82000000\0" \ + "ramdisk_addr_r=0x82100000\0" + +/* Defines for SPL */ +#define CONFIG_SPL_TEXT_BASE 0x80108000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80090000 +#define CONFIG_SPL_STACK 0x800ffffc + +#endif diff --git a/include/configs/thuban.h b/include/configs/thuban.h index 5fed55da1c..25ac2cba4b 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -69,6 +69,7 @@ /* Default env settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ "hostname=thuban\0" \ + "ubi_off=2048\0"\ "nand_img_size=0x400000\0" \ "optargs=\0" \ "preboot=draco_led 0\0" \ @@ -78,7 +79,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND \ "if dfubutton; then " \ @@ -90,7 +90,6 @@ "reset;" #else -#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTCOMMAND \ "setenv autoload no; " \ diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index e43a7fdf3c..5c3b3da73c 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -84,7 +84,6 @@ "earlycon=pl011,0x87e024000000 " \ "debug maxcpus=48 rootwait rw "\ "root=/dev/sda2 coherent_pool=16M" -#define CONFIG_BOOTDELAY 5 /* Do not preserve environment */ #define CONFIG_ENV_IS_NOWHERE 1 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 09f8e8fe5c..3c058832e1 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -39,7 +39,6 @@ /* commands to include */ #define CONFIG_VERSION_VARIABLE -#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 2e84dd27e4..05fd00fd5d 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -34,7 +34,6 @@ #define CONFIG_VERSION_VARIABLE #define CONFIG_DISPLAY_CPUINFO -#define CONFIG_BOOTDELAY 3 /* set negative for no autoboot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x81000000\0" \ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 7db08813e4..ba7cf15242 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -59,7 +59,7 @@ #define DEFAULT_MMC_TI_ARGS \ "mmcdev=0\0" \ "mmcrootfstype=ext4 rootwait\0" \ - "finduuid=part uuid mmc 0:2 uuid\0" \ + "finduuid=part uuid mmc ${bootpart} uuid\0" \ "args_mmc=run finduuid;setenv bootargs console=${console} " \ "${optargs} " \ "root=PARTUUID=${uuid} rw " \ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 2c9028c735..2ee26c4036 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -191,8 +191,6 @@ "-(ubifs)" /* USB Configuration */ -#define CONFIG_USB_XHCI -#define CONFIG_USB_XHCI_DWC3 #define CONFIG_USB_XHCI_KEYSTONE #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE @@ -247,7 +245,6 @@ "tftp_root=/\0" \ "nfs_root=/export\0" \ "mem_lpae=1\0" \ - "mem_reserve=512M\0" \ "addr_ubi=0x82000000\0" \ "addr_secdb_key=0xc000000\0" \ "name_kern=zImage\0" \ diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 5c5a12d493..2e4c8e9646 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -104,6 +104,8 @@ "setenv fdtfile dra72-evm.dtb; fi;" \ "if test $board_name = beagle_x15; then " \ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ + "if test $board_name = am572x_idk; then " \ + "setenv fdtfile am572x-idk.dtb; fi;" \ "if test $board_name = am57xx_evm; then " \ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \ "if test $fdtfile = undefined; then " \ diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index abe1da2bd6..74a9a098a0 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200} -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS \ "console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/trats.h b/include/configs/trats.h index 0c875cb47f..22b0c90ee9 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -242,12 +242,8 @@ #define CONFIG_SYS_WHITE_ON_BLACK /* LCD */ -#define CONFIG_EXYNOS_FB -#define CONFIG_LCD -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 -#define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 492a253d73..1febaaef51 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -222,12 +222,8 @@ int get_soft_i2c_sda_pin(void); #define CONFIG_SYS_WHITE_ON_BLACK /* LCD */ -#define CONFIG_EXYNOS_FB -#define CONFIG_LCD -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 -#define CONFIG_S6E8AX0 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 855d789c18..aed3931515 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -162,7 +162,6 @@ /* Environment information (this is the common part) */ -#define CONFIG_BOOTDELAY 0 /* hang() the board on panic() */ #define CONFIG_PANIC_HANG diff --git a/include/configs/ts4800.h b/include/configs/ts4800.h index aa0605f28d..252b3fc706 100644 --- a/include/configs/ts4800.h +++ b/include/configs/ts4800.h @@ -62,6 +62,8 @@ #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR +#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 + #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -90,25 +92,33 @@ /* Environment variables */ -#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x91000000 /* loadaddr env var */ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ - "image=uImage\0" \ + "image=zImage\0" \ + "fdt_file=imx51-ts4800.dtb\0" \ + "fdt_addr=0x90fe0000\0" \ "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcargs=setenv bootargs root=/dev/mmcblk0p2 rootwait rw\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs root=${mmcroot}\0" \ "addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs addtty; " \ - "bootm; " + "if run loadfdt; then " \ + "bootz ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo ERR: cannot load FDT; " \ + "fi; " + #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/tseries.h b/include/configs/tseries.h index b6a1ae0554..8ed9eb080d 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -195,7 +195,6 @@ MMCARGS #define CONFIG_BOOTCOMMAND \ "run defboot;" -#define CONFIG_BOOTDELAY 0 #ifdef CONFIG_NAND /* diff --git a/include/configs/twister.h b/include/configs/twister.h index 4f5560fec3..66f4680b7e 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -20,7 +20,6 @@ #define CONFIG_TAM3517_SW3_SETTINGS #define CONFIG_XR16L2751 -#define CONFIG_BOOTDELAY 10 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 10fd8c21ea..77057d0097 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -99,8 +99,7 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #ifdef CONFIG_ARM64 -#define CONFIG_ARMV8_MULTIENTRY -#define CPU_RELEASE_ADDR 0x80000100 +#define CPU_RELEASE_ADDR 0x80000000 #define COUNTER_FREQUENCY 50000000 #define CONFIG_GICV3 #define GICD_BASE 0x5fe00000 @@ -148,7 +147,6 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) -#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* @@ -245,7 +243,6 @@ "tftpboot $tmp_addr u-boot.bin\0" \ "emmcupdate=mmcsetn &&" \ "mmc partconf $mmc_first_dev 0 1 1 &&" \ - "mmc erase 0 800 &&" \ "tftpboot u-boot-spl.bin &&" \ "mmc write $loadaddr 0 80 &&" \ "tftpboot u-boot.bin &&" \ @@ -288,7 +285,9 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NOR_SUPPORT -#ifndef CONFIG_ARM64 +#ifdef CONFIG_ARM64 +#define CONFIG_SPL_BOARD_LOAD_IMAGE +#else #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #endif diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index d118928ebd..ad54192194 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -46,7 +46,6 @@ #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 /* * BOOTP options diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 9a113f4e32..28c748d074 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -102,7 +102,6 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_PREBOOT "echo;" \ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ diff --git a/include/configs/vct.h b/include/configs/vct.h index cc5e3546b0..2bc98a8e8a 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -240,7 +240,6 @@ int vct_gpio_get(int pin); #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CONFIG_BOOTCOMMAND "run test3" -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ /* * UBI configuration diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 2425ebf669..83d0004f53 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -465,7 +465,6 @@ #define CONFIG_HOSTNAME ve8313 #define CONFIG_UBOOTPATH ve8313/u-boot.bin -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 6a3758216f..46cf83be02 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -216,7 +216,6 @@ "fi ; " \ "booti ${kernel_addr} ${initrd_param} ${fdt_addr}" -#define CONFIG_BOOTDELAY 1 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -241,7 +240,6 @@ "fdt chosen ${initrd_addr} ${initrd_end}; " \ "booti $kernel_addr - $fdt_addr" -#define CONFIG_BOOTDELAY 1 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -260,7 +258,6 @@ #define CONFIG_BOOTCOMMAND "booti $kernel_addr $initrd_addr $fdt_addr" -#define CONFIG_BOOTDELAY 1 #endif diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 6dc8f25b90..51898e623c 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -168,7 +168,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) -#define CONFIG_BOOTDELAY 2 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index b240613bb5..c4a1fd091a 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -103,7 +103,6 @@ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_SPD_BUS_NUM 0 -#define CONFIG_BOOTDELAY 3 #define CONFIG_SYS_LOAD_ADDR 0x82000000 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 732d091583..60513df032 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -542,7 +542,6 @@ #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* boot command will set bootargs */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 4dfcd28eaf..fc0e51a9ae 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -9,7 +9,6 @@ #ifndef __WARP7_CONFIG_H #define __WARP7_CONFIG_H -#define CONFIG_BOOTDELAY 1 #include "mx7_common.h" #define PHYS_SDRAM_SIZE SZ_512M @@ -17,9 +16,10 @@ #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) +#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR @@ -28,10 +28,7 @@ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_DFU_ENV_SETTINGS \ - "dfu_alt_info=image raw 0 0x800000;"\ - "u-boot raw 0 0x4000;"\ - "bootimg part 0 1;"\ - "rootfs part 0 2\0" \ + "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_DFU_ENV_SETTINGS \ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index a4ae304ade..153466a623 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -97,7 +97,6 @@ #define CONFIG_NET_RETRY_COUNT 100 -#define CONFIG_BOOTDELAY 3 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index b81b6ff1fa..ba222f936f 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -175,7 +175,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyS2,115200n8" diff --git a/include/configs/x600.h b/include/configs/x600.h index 07c8abe2a7..71c0b45842 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -124,7 +124,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_DOS_PARTITION -#define CONFIG_BOOTDELAY 3 /* * U-Boot Environment placing definitions. diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index b4aad6cd24..fdefeaf24c 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -225,6 +225,5 @@ "tftpboot $loadaddr $bootfile;" \ "zboot $loadaddr" -#define CONFIG_BOOTDELAY 2 #endif /* __CONFIG_H */ diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h index 4d68c21ae0..69558fdfd2 100644 --- a/include/configs/xfi3.h +++ b/include/configs/xfi3.h @@ -28,7 +28,6 @@ #define CONFIG_ENV_OVERWRITE /* Booting Linux */ -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " #define CONFIG_LOADADDR 0x42000000 diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index 067cfa69f2..e97e9d0816 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -33,7 +33,6 @@ #undef CONFIG_CMD_EEPROM /*Misc*/ -#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index ffb6b34d57..e776e32412 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -76,7 +76,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_MAY_FAIL -#define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_SUBNETMASK @@ -105,7 +104,6 @@ #endif #ifdef CONFIG_NAND_ARASAN -# define CONFIG_CMD_NAND # define CONFIG_CMD_NAND_LOCK_UNLOCK # define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_SELF_INIT @@ -117,8 +115,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 #if defined(CONFIG_ZYNQMP_USB) -#define CONFIG_USB_XHCI_DWC3 -#define CONFIG_USB_XHCI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE @@ -148,22 +144,6 @@ # define DFU_ALT_INFO #endif -/* Initial environment variables */ -#ifndef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr=0x80000\0" \ - "fdt_addr=0x7000000\0" \ - "fdt_high=0x10000000\0" \ - CONFIG_KERNEL_FDT_OFST_SIZE \ - "sdbootdev=0\0"\ - "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \ - "load mmc $sdbootdev:$partid $kernel_addr Image && " \ - "booti $kernel_addr - $fdt_addr\0" \ - DFU_ALT_INFO -#endif - -#define CONFIG_BOOTCOMMAND "run $modeboot" -#define CONFIG_BOOTDELAY 3 #define CONFIG_BOARD_LATE_INIT @@ -190,6 +170,8 @@ # define CONFIG_PHY_NATSEMI # define CONFIG_PHY_TI # define CONFIG_PHY_GIGE +# define CONFIG_PHY_VITESSE +# define CONFIG_PHY_REALTEK # define PHY_ANEG_TIMEOUT 20000 #endif @@ -210,7 +192,8 @@ # define CONFIG_SYS_EEPROM_SIZE (64 * 1024) #endif -#ifdef CONFIG_AHCI +#ifdef CONFIG_SATA_CEVA +#define CONFIG_AHCI #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT @@ -229,6 +212,50 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_CLOCKS +#define ENV_MEM_LAYOUT_SETTINGS \ + "fdt_high=10000000\0" \ + "initrd_high=10000000\0" \ + "fdt_addr_r=0x40000000\0" \ + "pxefile_addr_r=0x10000000\0" \ + "kernel_addr_r=0x18000000\0" \ + "scriptaddr=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + +#if defined(CONFIG_ZYNQ_SDHCI) +# define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) +#else +# define BOOT_TARGET_DEVICES_MMC(func) +#endif + +#if defined(CONFIG_SATA_CEVA) +# define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) +#else +# define BOOT_TARGET_DEVICES_SCSI(func) +#endif + +#if defined(CONFIG_ZYNQMP_USB) +# define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) +#else +# define BOOT_TARGET_DEVICES_USB(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_MMC(func) \ + BOOT_TARGET_DEVICES_USB(func) \ + BOOT_TARGET_DEVICES_SCSI(func) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +/* Initial environment variables */ +#ifndef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + ENV_MEM_LAYOUT_SETTINGS \ + BOOTENV \ + DFU_ALT_INFO +#endif + #define CONFIG_SPL_TEXT_BASE 0xfffc0000 #define CONFIG_SPL_MAX_SIZE 0x20000 diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index 9506355713..c5bd5da43c 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -22,13 +22,6 @@ #define COUNTER_FREQUENCY 4000000 -#define CONFIG_KERNEL_FDT_OFST_SIZE \ - "kernel_offset=0x400000\0" \ - "fdt_offset=0x2400000\0" \ - "kernel_size=0x2000000\0" \ - "fdt_size=0x80000\0" \ - "board=ep108\0" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h index 3c0ba883db..c9f443207d 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm015_dc1.h @@ -17,13 +17,6 @@ #define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1" -#define CONFIG_KERNEL_FDT_OFST_SIZE \ - "kernel_offset=0x400000\0" \ - "fdt_offset=0x2400000\0" \ - "kernel_size=0x2000000\0" \ - "fdt_size=0x80000\0" \ - "board=zc1751-dc1\0" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h index 83ea624c51..526d0bbe58 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm016_dc2.h @@ -14,13 +14,6 @@ #define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2" -#define CONFIG_KERNEL_FDT_OFST_SIZE \ - "kernel_offset=0x400000\0" \ - "fdt_offset=0x2400000\0" \ - "kernel_size=0x2000000\0" \ - "fdt_size=0x80000\0" \ - "board=zc1751-dc2\0" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h b/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h new file mode 100644 index 0000000000..65277a64c3 --- /dev/null +++ b/include/configs/xilinx_zynqmp_zc1751_xm018_dc4.h @@ -0,0 +1,17 @@ +/* + * Configuration for Xilinx ZynqMP zc1751 XM018 DC4 + * + * (C) Copyright 2015 Xilinx, Inc. + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H +#define __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H + +#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm018 dc4" + +#include <configs/xilinx_zynqmp.h> + +#endif /* __CONFIG_ZYNQMP_ZC1751_XM018_DC4_H */ diff --git a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h index 4f8f5c1053..76350d9579 100644 --- a/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h +++ b/include/configs/xilinx_zynqmp_zc1751_xm019_dc5.h @@ -15,13 +15,6 @@ #define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5" -#define CONFIG_KERNEL_FDT_OFST_SIZE \ - "kernel_offset=0x400000\0" \ - "fdt_offset=0x2400000\0" \ - "kernel_size=0x2000000\0" \ - "fdt_size=0x80000\0" \ - "board=zc1751-dc5\0" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */ diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h index 81079fe7d8..7ceab3230b 100644 --- a/include/configs/xilinx_zynqmp_zcu102.h +++ b/include/configs/xilinx_zynqmp_zcu102.h @@ -41,7 +41,6 @@ #define CONFIG_CMD_PCA953X #define CONFIG_CMD_PCA953X_INFO -#define CONFIG_AHCI #define CONFIG_SATA_CEVA #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR} @@ -54,13 +53,6 @@ #define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54 #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20 -#define CONFIG_KERNEL_FDT_OFST_SIZE \ - "kernel_offset=0x180000\0" \ - "fdt_offset=0x100000\0" \ - "kernel_size=0x1e00000\0" \ - "fdt_size=0x80000\0" \ - "board=zcu102\0" - #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_ZCU102_H */ diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index 9838fbfa2e..73c8d5b6fd 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -196,7 +196,6 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 86c9b4c41f..9f3158d056 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -536,7 +536,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index d1847ac2e8..a418fc5c9e 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -319,7 +319,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 6a06b0ab1c..36df6682b2 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -391,7 +391,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 5b377e35ee..1794ba10a3 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -375,7 +375,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index fcd7772642..6e83cc9180 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -40,7 +40,6 @@ #define CONFIG_BOOTARGS \ "console=tty0 console=ttyS2,115200 fbcon=rotate:3" #define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_SYS_TEXT_BASE 0x0 diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 264bb63c06..ea1ead23b7 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -137,7 +137,6 @@ #define CONFIG_PREBOOT "" -#define CONFIG_BOOTDELAY 5 /* * Size of malloc() pool diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 82ece0df2d..8dbac8728f 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -236,7 +236,6 @@ #endif #define CONFIG_BOOTCOMMAND "run $modeboot" -#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ #define CONFIG_SYS_LOAD_ADDR 0 /* default? */ /* Miscellaneous configurable options */ diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 0777cbe27e..b768660e85 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -63,6 +63,7 @@ enum uclass_id { UCLASS_PWRSEQ, /* Power sequence device */ UCLASS_REGULATOR, /* Regulator device */ UCLASS_REMOTEPROC, /* Remote Processor device */ + UCLASS_RESET, /* Reset controller device */ UCLASS_RTC, /* Real time clock device */ UCLASS_SERIAL, /* Serial UART */ UCLASS_SPI, /* SPI bus */ diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h new file mode 100644 index 0000000000..ab3ee241d1 --- /dev/null +++ b/include/dt-bindings/clock/at91.h @@ -0,0 +1,23 @@ +/* + * This header provides constants for AT91 pmc status. + * + * The constants defined in this header are being used in dts. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _DT_BINDINGS_CLK_AT91_H +#define _DT_BINDINGS_CLK_AT91_H + +#define AT91_PMC_MOSCS 0 /* MOSCS Flag */ +#define AT91_PMC_LOCKA 1 /* PLLA Lock */ +#define AT91_PMC_LOCKB 2 /* PLLB Lock */ +#define AT91_PMC_MCKRDY 3 /* Master Clock */ +#define AT91_PMC_LOCKU 6 /* UPLL Lock */ +#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */ +#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */ +#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */ +#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */ +#define AT91_PMC_GCKRDY 24 /* Generated Clocks */ + +#endif diff --git a/include/dt-bindings/clock/exynos7420-clk.h b/include/dt-bindings/clock/exynos7420-clk.h new file mode 100644 index 0000000000..10c5586110 --- /dev/null +++ b/include/dt-bindings/clock/exynos7420-clk.h @@ -0,0 +1,207 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H +#define _DT_BINDINGS_CLOCK_EXYNOS7_H + +/* TOPC */ +#define DOUT_ACLK_PERIS 1 +#define DOUT_SCLK_BUS0_PLL 2 +#define DOUT_SCLK_BUS1_PLL 3 +#define DOUT_SCLK_CC_PLL 4 +#define DOUT_SCLK_MFC_PLL 5 +#define DOUT_ACLK_CCORE_133 6 +#define DOUT_ACLK_MSCL_532 7 +#define ACLK_MSCL_532 8 +#define DOUT_SCLK_AUD_PLL 9 +#define FOUT_AUD_PLL 10 +#define SCLK_AUD_PLL 11 +#define SCLK_MFC_PLL_B 12 +#define SCLK_MFC_PLL_A 13 +#define SCLK_BUS1_PLL_B 14 +#define SCLK_BUS1_PLL_A 15 +#define SCLK_BUS0_PLL_B 16 +#define SCLK_BUS0_PLL_A 17 +#define SCLK_CC_PLL_B 18 +#define SCLK_CC_PLL_A 19 +#define ACLK_CCORE_133 20 +#define ACLK_PERIS_66 21 +#define TOPC_NR_CLK 22 + +/* TOP0 */ +#define DOUT_ACLK_PERIC1 1 +#define DOUT_ACLK_PERIC0 2 +#define CLK_SCLK_UART0 3 +#define CLK_SCLK_UART1 4 +#define CLK_SCLK_UART2 5 +#define CLK_SCLK_UART3 6 +#define CLK_SCLK_SPI0 7 +#define CLK_SCLK_SPI1 8 +#define CLK_SCLK_SPI2 9 +#define CLK_SCLK_SPI3 10 +#define CLK_SCLK_SPI4 11 +#define CLK_SCLK_SPDIF 12 +#define CLK_SCLK_PCM1 13 +#define CLK_SCLK_I2S1 14 +#define CLK_ACLK_PERIC0_66 15 +#define CLK_ACLK_PERIC1_66 16 +#define TOP0_NR_CLK 17 + +/* TOP1 */ +#define DOUT_ACLK_FSYS1_200 1 +#define DOUT_ACLK_FSYS0_200 2 +#define DOUT_SCLK_MMC2 3 +#define DOUT_SCLK_MMC1 4 +#define DOUT_SCLK_MMC0 5 +#define CLK_SCLK_MMC2 6 +#define CLK_SCLK_MMC1 7 +#define CLK_SCLK_MMC0 8 +#define CLK_ACLK_FSYS0_200 9 +#define CLK_ACLK_FSYS1_200 10 +#define CLK_SCLK_PHY_FSYS1 11 +#define CLK_SCLK_PHY_FSYS1_26M 12 +#define MOUT_SCLK_UFSUNIPRO20 13 +#define DOUT_SCLK_UFSUNIPRO20 14 +#define CLK_SCLK_UFSUNIPRO20 15 +#define DOUT_SCLK_PHY_FSYS1 16 +#define DOUT_SCLK_PHY_FSYS1_26M 17 +#define TOP1_NR_CLK 18 + +/* CCORE */ +#define PCLK_RTC 1 +#define CCORE_NR_CLK 2 + +/* PERIC0 */ +#define PCLK_UART0 1 +#define SCLK_UART0 2 +#define PCLK_HSI2C0 3 +#define PCLK_HSI2C1 4 +#define PCLK_HSI2C4 5 +#define PCLK_HSI2C5 6 +#define PCLK_HSI2C9 7 +#define PCLK_HSI2C10 8 +#define PCLK_HSI2C11 9 +#define PCLK_PWM 10 +#define SCLK_PWM 11 +#define PCLK_ADCIF 12 +#define PERIC0_NR_CLK 13 + +/* PERIC1 */ +#define PCLK_UART1 1 +#define PCLK_UART2 2 +#define PCLK_UART3 3 +#define SCLK_UART1 4 +#define SCLK_UART2 5 +#define SCLK_UART3 6 +#define PCLK_HSI2C2 7 +#define PCLK_HSI2C3 8 +#define PCLK_HSI2C6 9 +#define PCLK_HSI2C7 10 +#define PCLK_HSI2C8 11 +#define PCLK_SPI0 12 +#define PCLK_SPI1 13 +#define PCLK_SPI2 14 +#define PCLK_SPI3 15 +#define PCLK_SPI4 16 +#define SCLK_SPI0 17 +#define SCLK_SPI1 18 +#define SCLK_SPI2 19 +#define SCLK_SPI3 20 +#define SCLK_SPI4 21 +#define PCLK_I2S1 22 +#define PCLK_PCM1 23 +#define PCLK_SPDIF 24 +#define SCLK_I2S1 25 +#define SCLK_PCM1 26 +#define SCLK_SPDIF 27 +#define PERIC1_NR_CLK 28 + +/* PERIS */ +#define PCLK_CHIPID 1 +#define SCLK_CHIPID 2 +#define PCLK_WDT 3 +#define PCLK_TMU 4 +#define SCLK_TMU 5 +#define PERIS_NR_CLK 6 + +/* FSYS0 */ +#define ACLK_MMC2 1 +#define ACLK_AXIUS_USBDRD30X_FSYS0X 2 +#define ACLK_USBDRD300 3 +#define SCLK_USBDRD300_SUSPENDCLK 4 +#define SCLK_USBDRD300_REFCLK 5 +#define PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER 6 +#define PHYCLK_USBDRD300_UDRD30_PHYCLK_USER 7 +#define OSCCLK_PHY_CLKOUT_USB30_PHY 8 +#define ACLK_PDMA0 9 +#define ACLK_PDMA1 10 +#define FSYS0_NR_CLK 11 + +/* FSYS1 */ +#define ACLK_MMC1 1 +#define ACLK_MMC0 2 +#define PHYCLK_UFS20_TX0_SYMBOL 3 +#define PHYCLK_UFS20_RX0_SYMBOL 4 +#define PHYCLK_UFS20_RX1_SYMBOL 5 +#define ACLK_UFS20_LINK 6 +#define SCLK_UFSUNIPRO20_USER 7 +#define PHYCLK_UFS20_RX1_SYMBOL_USER 8 +#define PHYCLK_UFS20_RX0_SYMBOL_USER 9 +#define PHYCLK_UFS20_TX0_SYMBOL_USER 10 +#define OSCCLK_PHY_CLKOUT_EMBEDDED_COMBO_PHY 11 +#define SCLK_COMBO_PHY_EMBEDDED_26M 12 +#define DOUT_PCLK_FSYS1 13 +#define PCLK_GPIO_FSYS1 14 +#define MOUT_FSYS1_PHYCLK_SEL1 15 +#define FSYS1_NR_CLK 16 + +/* MSCL */ +#define USERMUX_ACLK_MSCL_532 1 +#define DOUT_PCLK_MSCL 2 +#define ACLK_MSCL_0 3 +#define ACLK_MSCL_1 4 +#define ACLK_JPEG 5 +#define ACLK_G2D 6 +#define ACLK_LH_ASYNC_SI_MSCL_0 7 +#define ACLK_LH_ASYNC_SI_MSCL_1 8 +#define ACLK_AXI2ACEL_BRIDGE 9 +#define ACLK_XIU_MSCLX_0 10 +#define ACLK_XIU_MSCLX_1 11 +#define ACLK_QE_MSCL_0 12 +#define ACLK_QE_MSCL_1 13 +#define ACLK_QE_JPEG 14 +#define ACLK_QE_G2D 15 +#define ACLK_PPMU_MSCL_0 16 +#define ACLK_PPMU_MSCL_1 17 +#define ACLK_MSCLNP_133 18 +#define ACLK_AHB2APB_MSCL0P 19 +#define ACLK_AHB2APB_MSCL1P 20 + +#define PCLK_MSCL_0 21 +#define PCLK_MSCL_1 22 +#define PCLK_JPEG 23 +#define PCLK_G2D 24 +#define PCLK_QE_MSCL_0 25 +#define PCLK_QE_MSCL_1 26 +#define PCLK_QE_JPEG 27 +#define PCLK_QE_G2D 28 +#define PCLK_PPMU_MSCL_0 29 +#define PCLK_PPMU_MSCL_1 30 +#define PCLK_AXI2ACEL_BRIDGE 31 +#define PCLK_PMU_MSCL 32 +#define MSCL_NR_CLK 33 + +/* AUD */ +#define SCLK_I2S 1 +#define SCLK_PCM 2 +#define PCLK_I2S 3 +#define PCLK_PCM 4 +#define ACLK_ADMA 5 +#define AUD_NR_CLK 6 +#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */ diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h new file mode 100644 index 0000000000..997312edcb --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77802.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77802 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77802_CLK_32K_AP 0 +#define MAX77802_CLK_32K_CP 1 + +/* Total number of clocks. */ +#define MAX77802_CLKS_NUM (MAX77802_CLK_32K_CP + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */ diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h new file mode 100644 index 0000000000..ab6cbba454 --- /dev/null +++ b/include/dt-bindings/dma/at91.h @@ -0,0 +1,52 @@ +/* + * This header provides macros for at91 dma bindings. + * + * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_DMA_H__ +#define __DT_BINDINGS_AT91_DMA_H__ + +/* ---------- HDMAC ---------- */ + +/* + * Source and/or destination peripheral ID + */ +#define AT91_DMA_CFG_PER_ID_MASK (0xff) +#define AT91_DMA_CFG_PER_ID(id) (id & AT91_DMA_CFG_PER_ID_MASK) + +/* + * FIFO configuration: it defines when a request is serviced. + */ +#define AT91_DMA_CFG_FIFOCFG_OFFSET (8) +#define AT91_DMA_CFG_FIFOCFG_MASK (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET) +#define AT91_DMA_CFG_FIFOCFG_HALF (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* half FIFO (default behavior) */ +#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */ +#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */ + + +/* ---------- XDMAC ---------- */ +#define AT91_XDMAC_DT_MEM_IF_MASK (0x1) +#define AT91_XDMAC_DT_MEM_IF_OFFSET (13) +#define AT91_XDMAC_DT_MEM_IF(mem_if) (((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \ + << AT91_XDMAC_DT_MEM_IF_OFFSET) +#define AT91_XDMAC_DT_GET_MEM_IF(cfg) (((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \ + & AT91_XDMAC_DT_MEM_IF_MASK) + +#define AT91_XDMAC_DT_PER_IF_MASK (0x1) +#define AT91_XDMAC_DT_PER_IF_OFFSET (14) +#define AT91_XDMAC_DT_PER_IF(per_if) (((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \ + << AT91_XDMAC_DT_PER_IF_OFFSET) +#define AT91_XDMAC_DT_GET_PER_IF(cfg) (((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \ + & AT91_XDMAC_DT_PER_IF_MASK) + +#define AT91_XDMAC_DT_PERID_MASK (0x7f) +#define AT91_XDMAC_DT_PERID_OFFSET (24) +#define AT91_XDMAC_DT_PERID(perid) (((perid) & AT91_XDMAC_DT_PERID_MASK) \ + << AT91_XDMAC_DT_PERID_OFFSET) +#define AT91_XDMAC_DT_GET_PERID(cfg) (((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \ + & AT91_XDMAC_DT_PERID_MASK) + +#endif /* __DT_BINDINGS_AT91_DMA_H__ */ diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h index 197dc28b67..a1c09e88e8 100644 --- a/include/dt-bindings/gpio/tegra-gpio.h +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -12,40 +12,40 @@ #include <dt-bindings/gpio/gpio.h> -#define TEGRA_GPIO_BANK_ID_A 0 -#define TEGRA_GPIO_BANK_ID_B 1 -#define TEGRA_GPIO_BANK_ID_C 2 -#define TEGRA_GPIO_BANK_ID_D 3 -#define TEGRA_GPIO_BANK_ID_E 4 -#define TEGRA_GPIO_BANK_ID_F 5 -#define TEGRA_GPIO_BANK_ID_G 6 -#define TEGRA_GPIO_BANK_ID_H 7 -#define TEGRA_GPIO_BANK_ID_I 8 -#define TEGRA_GPIO_BANK_ID_J 9 -#define TEGRA_GPIO_BANK_ID_K 10 -#define TEGRA_GPIO_BANK_ID_L 11 -#define TEGRA_GPIO_BANK_ID_M 12 -#define TEGRA_GPIO_BANK_ID_N 13 -#define TEGRA_GPIO_BANK_ID_O 14 -#define TEGRA_GPIO_BANK_ID_P 15 -#define TEGRA_GPIO_BANK_ID_Q 16 -#define TEGRA_GPIO_BANK_ID_R 17 -#define TEGRA_GPIO_BANK_ID_S 18 -#define TEGRA_GPIO_BANK_ID_T 19 -#define TEGRA_GPIO_BANK_ID_U 20 -#define TEGRA_GPIO_BANK_ID_V 21 -#define TEGRA_GPIO_BANK_ID_W 22 -#define TEGRA_GPIO_BANK_ID_X 23 -#define TEGRA_GPIO_BANK_ID_Y 24 -#define TEGRA_GPIO_BANK_ID_Z 25 -#define TEGRA_GPIO_BANK_ID_AA 26 -#define TEGRA_GPIO_BANK_ID_BB 27 -#define TEGRA_GPIO_BANK_ID_CC 28 -#define TEGRA_GPIO_BANK_ID_DD 29 -#define TEGRA_GPIO_BANK_ID_EE 30 -#define TEGRA_GPIO_BANK_ID_FF 31 +#define TEGRA_GPIO_PORT_A 0 +#define TEGRA_GPIO_PORT_B 1 +#define TEGRA_GPIO_PORT_C 2 +#define TEGRA_GPIO_PORT_D 3 +#define TEGRA_GPIO_PORT_E 4 +#define TEGRA_GPIO_PORT_F 5 +#define TEGRA_GPIO_PORT_G 6 +#define TEGRA_GPIO_PORT_H 7 +#define TEGRA_GPIO_PORT_I 8 +#define TEGRA_GPIO_PORT_J 9 +#define TEGRA_GPIO_PORT_K 10 +#define TEGRA_GPIO_PORT_L 11 +#define TEGRA_GPIO_PORT_M 12 +#define TEGRA_GPIO_PORT_N 13 +#define TEGRA_GPIO_PORT_O 14 +#define TEGRA_GPIO_PORT_P 15 +#define TEGRA_GPIO_PORT_Q 16 +#define TEGRA_GPIO_PORT_R 17 +#define TEGRA_GPIO_PORT_S 18 +#define TEGRA_GPIO_PORT_T 19 +#define TEGRA_GPIO_PORT_U 20 +#define TEGRA_GPIO_PORT_V 21 +#define TEGRA_GPIO_PORT_W 22 +#define TEGRA_GPIO_PORT_X 23 +#define TEGRA_GPIO_PORT_Y 24 +#define TEGRA_GPIO_PORT_Z 25 +#define TEGRA_GPIO_PORT_AA 26 +#define TEGRA_GPIO_PORT_BB 27 +#define TEGRA_GPIO_PORT_CC 28 +#define TEGRA_GPIO_PORT_DD 29 +#define TEGRA_GPIO_PORT_EE 30 +#define TEGRA_GPIO_PORT_FF 31 -#define TEGRA_GPIO(bank, offset) \ - ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) +#define TEGRA_GPIO(port, offset) \ + ((TEGRA_GPIO_PORT_##port * 8) + offset) #endif diff --git a/include/dt-bindings/gpio/tegra186-gpio.h b/include/dt-bindings/gpio/tegra186-gpio.h new file mode 100644 index 0000000000..7e6fb95da1 --- /dev/null +++ b/include/dt-bindings/gpio/tegra186-gpio.h @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + * + * This header provides constants for binding nvidia,tegra186-gpio*. + * + * The first cell in Tegra's GPIO specifier is the GPIO ID. The macros below + * provide names for this. + * + * The second cell contains standard flag values specified in gpio.h. + */ + +#ifndef _DT_BINDINGS_GPIO_TEGRA186_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA186_GPIO_H + +#include <dt-bindings/gpio/gpio.h> + +/* GPIOs implemented by main GPIO controller */ +#define TEGRA_MAIN_GPIO_PORT_A 0 +#define TEGRA_MAIN_GPIO_PORT_B 1 +#define TEGRA_MAIN_GPIO_PORT_C 2 +#define TEGRA_MAIN_GPIO_PORT_D 3 +#define TEGRA_MAIN_GPIO_PORT_E 4 +#define TEGRA_MAIN_GPIO_PORT_F 5 +#define TEGRA_MAIN_GPIO_PORT_G 6 +#define TEGRA_MAIN_GPIO_PORT_H 7 +#define TEGRA_MAIN_GPIO_PORT_I 8 +#define TEGRA_MAIN_GPIO_PORT_J 9 +#define TEGRA_MAIN_GPIO_PORT_K 10 +#define TEGRA_MAIN_GPIO_PORT_L 11 +#define TEGRA_MAIN_GPIO_PORT_M 12 +#define TEGRA_MAIN_GPIO_PORT_N 13 +#define TEGRA_MAIN_GPIO_PORT_O 14 +#define TEGRA_MAIN_GPIO_PORT_P 15 +#define TEGRA_MAIN_GPIO_PORT_Q 16 +#define TEGRA_MAIN_GPIO_PORT_R 17 +#define TEGRA_MAIN_GPIO_PORT_T 18 +#define TEGRA_MAIN_GPIO_PORT_X 19 +#define TEGRA_MAIN_GPIO_PORT_Y 20 +#define TEGRA_MAIN_GPIO_PORT_BB 21 +#define TEGRA_MAIN_GPIO_PORT_CC 22 + +#define TEGRA_MAIN_GPIO(port, offset) \ + ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset) + +/* GPIOs implemented by AON GPIO controller */ +#define TEGRA_AON_GPIO_PORT_S 0 +#define TEGRA_AON_GPIO_PORT_U 1 +#define TEGRA_AON_GPIO_PORT_V 2 +#define TEGRA_AON_GPIO_PORT_W 3 +#define TEGRA_AON_GPIO_PORT_Z 4 +#define TEGRA_AON_GPIO_PORT_AA 5 +#define TEGRA_AON_GPIO_PORT_EE 6 +#define TEGRA_AON_GPIO_PORT_FF 7 + +#define TEGRA_AON_GPIO(port, offset) \ + ((TEGRA_AON_GPIO_PORT_##port * 8) + offset) + +#endif diff --git a/include/dt-bindings/mailbox/tegra-hsp.h b/include/dt-bindings/mailbox/tegra-hsp.h new file mode 100644 index 0000000000..e8c23fa91d --- /dev/null +++ b/include/dt-bindings/mailbox/tegra-hsp.h @@ -0,0 +1,14 @@ +/* + * This header provides constants for binding nvidia,tegra186-hsp. + * + * The number with TEGRA_HSP_MASTER prefix indicates the bit that is + * associated with a master ID in the doorbell registers. + */ + +#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H +#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H + +#define TEGRA_HSP_MASTER_CCPLEX 17 +#define TEGRA_HSP_MASTER_BPMP 19 + +#endif diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h new file mode 100644 index 0000000000..bbca3d0389 --- /dev/null +++ b/include/dt-bindings/pinctrl/at91.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for most at91 pinctrl bindings. + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_PINCTRL_H__ +#define __DT_BINDINGS_AT91_PINCTRL_H__ + +#define AT91_PINCTRL_NONE (0 << 0) +#define AT91_PINCTRL_PULL_UP (1 << 0) +#define AT91_PINCTRL_MULTI_DRIVE (1 << 1) +#define AT91_PINCTRL_DEGLITCH (1 << 2) +#define AT91_PINCTRL_PULL_DOWN (1 << 3) +#define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_DEBOUNCE (1 << 16) +#define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) + +#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) + +#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) + +#define AT91_PIOA 0 +#define AT91_PIOB 1 +#define AT91_PIOC 2 +#define AT91_PIOD 3 +#define AT91_PIOE 4 + +#define AT91_PERIPH_GPIO 0 +#define AT91_PERIPH_A 1 +#define AT91_PERIPH_B 2 +#define AT91_PERIPH_C 3 +#define AT91_PERIPH_D 4 + +#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */ diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h new file mode 100644 index 0000000000..cf28631d71 --- /dev/null +++ b/include/dt-bindings/regulator/maxim,max77802.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants for the Maxim 77802 PMIC regulators + */ + +#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H +#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H + +/* Regulator operating modes */ +#define MAX77802_OPMODE_LP 1 +#define MAX77802_OPMODE_NORMAL 3 + +#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */ diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h index 09ff8a74d6..7af2ad11e4 100644 --- a/include/dwc3-uboot.h +++ b/include/dwc3-uboot.h @@ -13,7 +13,7 @@ #include <linux/usb/otg.h> struct dwc3_device { - int base; + unsigned long base; enum usb_dr_mode dr_mode; u32 maximum_speed; unsigned tx_fifo_resize:1; diff --git a/include/efi_api.h b/include/efi_api.h index 20035d7272..f572b88079 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -17,6 +17,10 @@ #include <efi.h> +#ifdef CONFIG_EFI_LOADER +#include <asm/setjmp.h> +#endif + /* Types and defines for EFI CreateEvent */ enum efi_event_type { EFI_TIMER_STOP = 0, @@ -239,6 +243,12 @@ struct efi_loaded_image { unsigned int image_code_type; unsigned int image_data_type; unsigned long unload; + + /* Below are efi loader private fields */ +#ifdef CONFIG_EFI_LOADER + efi_status_t exit_status; + struct jmp_buf_data exit_jmp; +#endif }; #define DEVICE_PATH_GUID \ diff --git a/include/efi_loader.h b/include/efi_loader.h index 3332d61cef..97388350eb 100644 --- a/include/efi_loader.h +++ b/include/efi_loader.h @@ -15,18 +15,10 @@ #include <linux/list.h> -/* #define DEBUG_EFI */ - -#ifdef DEBUG_EFI #define EFI_ENTRY(format, ...) do { \ efi_restore_gd(); \ - printf("EFI: Entry %s(" format ")\n", __func__, ##__VA_ARGS__); \ + debug("EFI: Entry %s(" format ")\n", __func__, ##__VA_ARGS__); \ } while(0) -#else -#define EFI_ENTRY(format, ...) do { \ - efi_restore_gd(); \ - } while(0) -#endif #define EFI_EXIT(ret) efi_exit_func(ret); diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h index 3969a6a066..ab92ffb72a 100644 --- a/include/exynos_lcd.h +++ b/include/exynos_lcd.h @@ -75,8 +75,8 @@ typedef struct vidinfo { unsigned int sclk_div; unsigned int dual_lcd_enabled; + struct exynos_fb *reg; + struct exynos_platform_mipi_dsim *dsim_platform_data_dt; } vidinfo_t; -void init_panel_info(vidinfo_t *vid); - #endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 37d482aba7..54e3d8139f 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -123,6 +123,7 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA124_SOR, /* Tegra 124 Serial Output Resource */ COMPAT_NVIDIA_TEGRA124_PMC, /* Tegra 124 power mgmt controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ + COMPAT_NVIDIA_TEGRA186_SDMMC, /* Tegra186 SDMMC controller */ COMPAT_NVIDIA_TEGRA210_SDMMC, /* Tegra210 SDMMC controller */ COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ diff --git a/include/fsl_mmdc.h b/include/fsl_mmdc.h new file mode 100644 index 0000000000..281a819863 --- /dev/null +++ b/include/fsl_mmdc.h @@ -0,0 +1,160 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef FSL_MMDC_H +#define FSL_MMDC_H + +#define CONFIG_SYS_MMDC_CORE_ODT_TIMING 0x12554000 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_0 0xbabf7954 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_1 0xff328f64 +#define CONFIG_SYS_MMDC_CORE_TIMING_CFG_2 0x01ff00db + +#define CONFIG_SYS_MMDC_CORE_MISC 0x00000680 +#define CONFIG_SYS_MMDC_PHY_MEASURE_UNIT 0x00000800 +#define CONFIG_SYS_MMDC_CORE_RDWR_CMD_DELAY 0x00002000 +#define CONFIG_SYS_MMDC_PHY_ODT_CTRL 0x0000022a + +#define CONFIG_SYS_MMDC_CORE_OUT_OF_RESET_DELAY 0x00bf1023 + +#define CONFIG_SYS_MMDC_CORE_ADDR_PARTITION 0x0000007f + +#define CONFIG_SYS_MMDC_PHY_ZQ_HW_CTRL 0xa1390003 + +#define FORCE_ZQ_AUTO_CALIBRATION (0x1 << 16) + +/* PHY Write Leveling Configuration and Error Status (MPWLGCR) */ +#define WR_LVL_HW_EN 0x00000001 + +/* PHY Pre-defined Compare and CA delay-line Configuration (MPPDCMPR2) */ +#define MPR_COMPARE_EN 0x00000001 + +#define CONFIG_SYS_MMDC_PHY_RD_DLY_LINES_CFG 0x40404040 + +/* MMDC PHY Read DQS gating control register 0 (MPDGCTRL0) */ +#define AUTO_RD_DQS_GATING_CALIBRATION_EN 0x10000000 + +/* MMDC PHY Read Delay HW Calibration Control Register (MPRDDLHWCTL) */ +#define AUTO_RD_CALIBRATION_EN 0x00000010 + +#define CONFIG_SYS_MMDC_CORE_PWR_DOWN_CTRL 0x00030035 + +#define CONFIG_SYS_MMDC_CORE_PWR_SAV_CTRL_STAT 0x00001067 + +#define CONFIG_SYS_MMDC_CORE_REFRESH_CTL 0x103e8000 + +#define START_REFRESH 0x00000001 + +/* MMDC Core Special Command Register (MDSCR) */ +#define CMD_ADDR_MSB_MR_OP(x) (x << 24) + +#define CMD_ADDR_LSB_MR_ADDR(x) (x << 16) + +#define DISABLE_CFG_REQ 0x0 +#define CONFIGURATION_REQ (0x1 << 15) +#define WL_EN (0x1 << 9) + +#define CMD_NORMAL (0x0 << 4) +#define CMD_PRECHARGE (0x1 << 4) +#define CMD_AUTO_REFRESH (0x2 << 4) +#define CMD_LOAD_MODE_REG (0x3 << 4) +#define CMD_ZQ_CALIBRATION (0x4 << 4) +#define CMD_PRECHARGE_BANK_OPEN (0x5 << 4) +#define CMD_MRR (0x6 << 4) + +#define CMD_BANK_ADDR_0 0x0 +#define CMD_BANK_ADDR_1 0x1 +#define CMD_BANK_ADDR_2 0x2 +#define CMD_BANK_ADDR_3 0x3 +#define CMD_BANK_ADDR_4 0x4 +#define CMD_BANK_ADDR_5 0x5 +#define CMD_BANK_ADDR_6 0x6 +#define CMD_BANK_ADDR_7 0x7 + +/* MMDC Registers */ +struct mmdc_p_regs { + u32 mdctl; + u32 mdpdc; + u32 mdotc; + u32 mdcfg0; + u32 mdcfg1; + u32 mdcfg2; + u32 mdmisc; + u32 mdscr; + u32 mdref; + u32 res1[2]; + u32 mdrwd; + u32 mdor; + u32 mdmrr; + u32 mdcfg3lp; + u32 mdmr4; + u32 mdasp; + u32 res2[239]; + u32 maarcr; + u32 mapsr; + u32 maexidr0; + u32 maexidr1; + u32 madpcr0; + u32 madpcr1; + u32 madpsr0; + u32 madpsr1; + u32 madpsr2; + u32 madpsr3; + u32 madpsr4; + u32 madpsr5; + u32 masbs0; + u32 masbs1; + u32 res3[2]; + u32 magenp; + u32 res4[239]; + u32 mpzqhwctrl; + u32 mpzqswctrl; + u32 mpwlgcr; + u32 mpwldectrl0; + u32 mpwldectrl1; + u32 mpwldlst; + u32 mpodtctrl; + u32 mprddqby0dl; + u32 mprddqby1dl; + u32 mprddqby2dl; + u32 mprddqby3dl; + u32 res5[4]; + u32 mpdgctrl0; + u32 mpdgctrl1; + u32 mpdgdlst0; + u32 mprddlctl; + u32 mprddlst; + u32 mpwrdlctl; + u32 mpwrdlst; + u32 mpsdctrl; + u32 mpzqlp2ctl; + u32 mprddlhwctl; + u32 mpwrdlhwctl; + u32 mprddlhwst0; + u32 mprddlhwst1; + u32 mpwrdlhwst0; + u32 mpwrdlhwst1; + u32 mpwlhwerr; + u32 mpdghwst0; + u32 mpdghwst1; + u32 mpdghwst2; + u32 mpdghwst3; + u32 mppdcmpr1; + u32 mppdcmpr2; + u32 mpswdar0; + u32 mpswdrdr0; + u32 mpswdrdr1; + u32 mpswdrdr2; + u32 mpswdrdr3; + u32 mpswdrdr4; + u32 mpswdrdr5; + u32 mpswdrdr6; + u32 mpswdrdr7; + u32 mpmur0; + u32 mpwrcadl; + u32 mpdccr; +}; + +#endif /* FSL_MMDC_H */ diff --git a/include/fsl_usb.h b/include/fsl_usb.h index 187e384305..fc72fb9384 100644 --- a/include/fsl_usb.h +++ b/include/fsl_usb.h @@ -86,188 +86,14 @@ struct ccsr_usb_phy { #endif /* USB Erratum Checking code */ -#ifdef CONFIG_PPC -static inline bool has_dual_phy(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_T1023: - case SVR_T1024: - case SVR_T1013: - case SVR_T1014: - return IS_SVR_REV(svr, 1, 0); - case SVR_T1040: - case SVR_T1042: - case SVR_T1020: - case SVR_T1022: - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - } - - return false; -} - -static inline bool has_erratum_a006261(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P2041: - case SVR_P2040: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); - case SVR_P3041: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || - IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); - case SVR_P5010: - case SVR_P5020: - case SVR_P5021: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T1040: - return IS_SVR_REV(svr, 1, 0); - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0); - case SVR_P5040: - return IS_SVR_REV(svr, 1, 0); - } - - return false; -} - -static inline bool has_erratum_a007075(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_B4860: - case SVR_B4420: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0); - case SVR_P4080: - return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); - } - return false; -} - -static inline bool has_erratum_a007798(void) -{ - return SVR_SOC_VER(get_svr()) == SVR_T4240 && - IS_SVR_REV(get_svr(), 2, 0); -} - -static inline bool has_erratum_a007792(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 2, 0); - case SVR_T1024: - case SVR_T1023: - return IS_SVR_REV(svr, 1, 0); - case SVR_T1040: - case SVR_T1042: - case SVR_T1020: - case SVR_T1022: - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); - } - return false; -} - -static inline bool has_erratum_a005697(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_9131: - case SVR_9132: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); - } - return false; -} - -static inline bool has_erratum_a004477(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P1022: - case SVR_9131: - case SVR_9132: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); - case SVR_P2020: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0) || - IS_SVR_REV(svr, 2, 1); - case SVR_B4860: - case SVR_B4420: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P4080: - return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); - } - - return false; -} -#else -static inline bool has_dual_phy(void) -{ - return false; -} - -static inline bool has_erratum_a006261(void) -{ - return false; -} - -static inline bool has_erratum_a007075(void) -{ - return false; -} - -static inline bool has_erratum_a007798(void) -{ - return false; -} - -static inline bool has_erratum_a007792(void) -{ - return false; -} - -static inline bool has_erratum_a005697(void) -{ - return false; -} - -static inline bool has_erratum_a004477(void) -{ - return false; -} +#if defined(CONFIG_PPC) || defined(CONFIG_ARM) +bool has_dual_phy(void); +bool has_erratum_a006261(void); +bool has_erratum_a007075(void); +bool has_erratum_a007798(void); +bool has_erratum_a007792(void); +bool has_erratum_a005697(void); +bool has_erratum_a004477(void); +bool has_erratum_a008751(void); #endif #endif /*_ASM_FSL_USB_H_ */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 3b8762df66..e1b9c64626 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -163,7 +163,7 @@ struct ihs_fpga { }; #endif -#ifdef CONFIG_HRCON +#if defined(CONFIG_HRCON) || defined(CONFIG_STRIDER_CON_DP) struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ diff --git a/include/i2c.h b/include/i2c.h index 1f5ae4538a..d500445aaf 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -701,6 +701,9 @@ extern struct i2c_bus_hose i2c_bus[]; * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. */ +#ifdef CONFIG_SYS_I2C_EARLY_INIT +void i2c_early_init_f(void); +#endif void i2c_init(int speed, int slaveaddr); void i2c_init_board(void); #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT diff --git a/include/libtizen.h b/include/libtizen.h index 6490fb52ba..55dccff715 100644 --- a/include/libtizen.h +++ b/include/libtizen.h @@ -10,6 +10,8 @@ #define HD_RESOLUTION 0 +#ifdef CONFIG_LCD void get_tizen_logo_info(vidinfo_t *vid); +#endif #endif /* _LIBTIZEN_H_ */ diff --git a/include/linux/compat.h b/include/linux/compat.h index e561ee311a..7236b8d0c3 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -25,6 +25,8 @@ extern struct p_current *current; printf(fmt, ##args) #define dev_err(dev, fmt, args...) \ printf(fmt, ##args) +#define dev_warn(dev, fmt, args...) \ + printf(fmt, ##args) #define printk printf #define printk_once printf diff --git a/include/linux/string.h b/include/linux/string.h index c7047ba0bc..091ccab395 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -20,10 +20,6 @@ extern __kernel_size_t strspn(const char *,const char *); */ #include <asm/string.h> -#ifndef __HAVE_ARCH_BCOPY -char *bcopy(const char *src, char *dest, int count); -#endif - #ifndef __HAVE_ARCH_STRCPY extern char * strcpy(char *,const char *); #endif diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h index c5e42e69fe..253eddf159 100644 --- a/include/linux/usb/xhci-fsl.h +++ b/include/linux/usb/xhci-fsl.h @@ -59,10 +59,14 @@ struct fsl_xhci { #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 -#elif defined(CONFIG_LS1043A) +#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A) #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR #define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR +#elif defined(CONFIG_LS1012A) +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0 +#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0 #endif #define FSL_USB_XHCI_ADDR {CONFIG_SYS_FSL_XHCI_USB1_ADDR, \ diff --git a/include/mailbox_uclass.h b/include/mailbox-uclass.h index 6a2994c34c..6ec62e5a0e 100644 --- a/include/mailbox_uclass.h +++ b/include/mailbox-uclass.h @@ -7,9 +7,9 @@ #ifndef _MAILBOX_UCLASS_H #define _MAILBOX_UCLASS_H -/* See mailbox_client.h for background documentation. */ +/* See mailbox.h for background documentation. */ -#include <mailbox_client.h> +#include <mailbox.h> struct udevice; diff --git a/include/mailbox_client.h b/include/mailbox.h index 8345ea0bf1..a92a1a590d 100644 --- a/include/mailbox_client.h +++ b/include/mailbox.h @@ -4,8 +4,8 @@ * SPDX-License-Identifier: GPL-2.0 */ -#ifndef _MAILBOX_CLIENT_H -#define _MAILBOX_CLIENT_H +#ifndef _MAILBOX_H +#define _MAILBOX_H /** * A mailbox is a hardware mechanism for transferring small fixed-size messages @@ -26,7 +26,7 @@ * * A driver that implements UCLASS_MAILBOX is a mailbox provider. A provider * will often implement multiple separate mailbox channels, since the hardware - * it manages often has this capability. mailbox_uclass.h describes the + * it manages often has this capability. mailbox-uclass.h describes the * interface which mailbox providers must implement. * * Mailbox consumers/clients generate and send, or receive and process, diff --git a/include/mmc.h b/include/mmc.h index 7fdfc324fe..f383925ade 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -49,6 +49,7 @@ #define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1) #define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0) #define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0) +#define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0) #define MMC_MODE_HS (1 << 0) #define MMC_MODE_HS_52MHz (1 << 1) diff --git a/include/power/tps65217.h b/include/power/tps65217.h index 93cbe36c47..69a49f76fe 100644 --- a/include/power/tps65217.h +++ b/include/power/tps65217.h @@ -65,7 +65,10 @@ enum { #define TPS65217_USB_INPUT_CUR_LIMIT_1300MA 0x02 #define TPS65217_USB_INPUT_CUR_LIMIT_1800MA 0x03 +#define TPS65217_DCDC_VOLT_SEL_950MV 0x02 +#define TPS65217_DCDC_VOLT_SEL_1100MV 0x08 #define TPS65217_DCDC_VOLT_SEL_1125MV 0x09 +#define TPS65217_DCDC_VOLT_SEL_1200MV 0x0c #define TPS65217_DCDC_VOLT_SEL_1275MV 0x0F #define TPS65217_DCDC_VOLT_SEL_1325MV 0x11 diff --git a/include/reset-uclass.h b/include/reset-uclass.h new file mode 100644 index 0000000000..50adeca757 --- /dev/null +++ b/include/reset-uclass.h @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RESET_UCLASS_H +#define _RESET_UCLASS_H + +/* See reset.h for background documentation. */ + +#include <reset.h> + +struct udevice; + +/** + * struct reset_ops - The functions that a reset controller driver must + * implement. + */ +struct reset_ops { + /** + * of_xlate - Translate a client's device-tree (OF) reset specifier. + * + * The reset core calls this function as the first step in implementing + * a client's reset_get_by_*() call. + * + * If this function pointer is set to NULL, the reset core will use a + * default implementation, which assumes #reset-cells = <1>, and that + * the DT cell contains a simple integer reset signal ID. + * + * At present, the reset API solely supports device-tree. If this + * changes, other xxx_xlate() functions may be added to support those + * other mechanisms. + * + * @reset_ctl: The reset control struct to hold the translation result. + * @args: The reset specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct reset_ctl *reset_ctl, + struct fdtdec_phandle_args *args); + /** + * request - Request a translated reset control. + * + * The reset core calls this function as the second step in + * implementing a client's reset_get_by_*() call, following a + * successful xxx_xlate() call. + * + * @reset_ctl: The reset control struct to request; this has been + * filled in by a previoux xxx_xlate() function call. + * @return 0 if OK, or a negative error code. + */ + int (*request)(struct reset_ctl *reset_ctl); + /** + * free - Free a previously requested reset control. + * + * This is the implementation of the client reset_free() API. + * + * @reset_ctl: The reset control to free. + * @return 0 if OK, or a negative error code. + */ + int (*free)(struct reset_ctl *reset_ctl); + /** + * rst_assert - Assert a reset signal. + * + * Note: This function is named rst_assert not assert to avoid + * conflicting with global macro assert(). + * + * @reset_ctl: The reset signal to assert. + * @return 0 if OK, or a negative error code. + */ + int (*rst_assert)(struct reset_ctl *reset_ctl); + /** + * rst_deassert - Deassert a reset signal. + * + * @reset_ctl: The reset signal to deassert. + * @return 0 if OK, or a negative error code. + */ + int (*rst_deassert)(struct reset_ctl *reset_ctl); +}; + +#endif diff --git a/include/reset.h b/include/reset.h new file mode 100644 index 0000000000..dc0900f96a --- /dev/null +++ b/include/reset.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _RESET_H +#define _RESET_H + +/** + * A reset is a hardware signal indicating that a HW module (or IP block, or + * sometimes an entire off-CPU chip) reset all of its internal state to some + * known-good initial state. Drivers will often reset HW modules when they + * begin execution to ensure that hardware correctly responds to all requests, + * or in response to some error condition. Reset signals are often controlled + * externally to the HW module being reset, by an entity this API calls a reset + * controller. This API provides a standard means for drivers to request that + * reset controllers set or clear reset signals. + * + * A driver that implements UCLASS_RESET is a reset controller or provider. A + * controller will often implement multiple separate reset signals, since the + * hardware it manages often has this capability. reset-uclass.h describes the + * interface which reset controllers must implement. + * + * Reset consumers/clients are the HW modules affected by reset signals. This + * header file describes the API used by drivers for those HW modules. + */ + +struct udevice; + +/** + * struct reset_ctl - A handle to (allowing control of) a single reset signal. + * + * Clients provide storage for reset control handles. The content of the + * structure is managed solely by the reset API and reset drivers. A reset + * control struct is initialized by "get"ing the reset control struct. The + * reset control struct is passed to all other reset APIs to identify which + * reset signal to operate upon. + * + * @dev: The device which implements the reset signal. + * @id: The reset signal ID within the provider. + * + * Currently, the reset API assumes that a single integer ID is enough to + * identify and configure any reset signal for any reset provider. If this + * assumption becomes invalid in the future, the struct could be expanded to + * either (a) add more fields to allow reset providers to store additional + * information, or (b) replace the id field with an opaque pointer, which the + * provider would dynamically allocated during its .of_xlate op, and process + * during is .request op. This may require the addition of an extra op to clean + * up the allocation. + */ +struct reset_ctl { + struct udevice *dev; + /* + * Written by of_xlate. We assume a single id is enough for now. In the + * future, we might add more fields here. + */ + unsigned long id; +}; + +/** + * reset_get_by_index - Get/request a reset signal by integer index. + * + * This looks up and requests a reset signal. The index is relative to the + * client device; each device is assumed to have n reset signals associated + * with it somehow, and this function finds and requests one of them. The + * mapping of client device reset signal indices to provider reset signals may + * be via device-tree properties, board-provided mapping tables, or some other + * mechanism. + * + * @dev: The client device. + * @index: The index of the reset signal to request, within the client's + * list of reset signals. + * @reset_ctl A pointer to a reset control struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int reset_get_by_index(struct udevice *dev, int index, + struct reset_ctl *reset_ctl); + +/** + * reset_get_by_name - Get/request a reset signal by name. + * + * This looks up and requests a reset signal. The name is relative to the + * client device; each device is assumed to have n reset signals associated + * with it somehow, and this function finds and requests one of them. The + * mapping of client device reset signal names to provider reset signal may be + * via device-tree properties, board-provided mapping tables, or some other + * mechanism. + * + * @dev: The client device. + * @name: The name of the reset signal to request, within the client's + * list of reset signals. + * @reset_ctl: A pointer to a reset control struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int reset_get_by_name(struct udevice *dev, const char *name, + struct reset_ctl *reset_ctl); + +/** + * reset_free - Free a previously requested reset signal. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_free(struct reset_ctl *reset_ctl); + +/** + * reset_assert - Assert a reset signal. + * + * This function will assert the specified reset signal, thus resetting the + * affected HW module(s). Depending on the reset controller hardware, the reset + * signal will either stay asserted until reset_deassert() is called, or the + * hardware may autonomously clear the reset signal itself. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_assert(struct reset_ctl *reset_ctl); + +/** + * reset_deassert - Deassert a reset signal. + * + * This function will deassert the specified reset signal, thus releasing the + * affected HW modules() from reset, and allowing them to continue normal + * operation. + * + * @reset_ctl: A reset control struct that was previously successfully + * requested by reset_get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int reset_deassert(struct reset_ctl *reset_ctl); + +#endif diff --git a/include/splash.h b/include/splash.h index f0755ca695..25df1cf5ad 100644 --- a/include/splash.h +++ b/include/splash.h @@ -43,6 +43,8 @@ struct splash_location { enum splash_flags flags; u32 offset; /* offset from start of storage */ char *devpart; /* Use the load command dev:part conventions */ + char *mtdpart; /* MTD partition for ubi part */ + char *ubivol; /* UBI volume-name for ubifsmount */ }; int splash_source_load(struct splash_location *locations, uint size); diff --git a/include/video.h b/include/video.h index c434bc71ae..0d5bd21c60 100644 --- a/include/video.h +++ b/include/video.h @@ -23,6 +23,11 @@ struct video_uc_platdata { ulong base; }; +enum video_polarity { + VIDEO_ACTIVE_HIGH, /* Pins are active high */ + VIDEO_ACTIVE_LOW, /* Pins are active low */ +}; + /* * Bits per pixel selector. Each value n is such that the bits-per-pixel is * 2 ^ n |
