diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-mips/addrspace.h | 12 | ||||
| -rw-r--r-- | include/configs/MIP405.h | 7 | ||||
| -rw-r--r-- | include/configs/PIP405.h | 7 | ||||
| -rw-r--r-- | include/configs/VCMA9.h | 30 | ||||
| -rw-r--r-- | include/configs/dbau1x00.h | 15 |
5 files changed, 57 insertions, 14 deletions
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index 0d1bf3246d..1fd00ccba9 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -40,6 +40,18 @@ #define PHYSADDR(a) ((a) & 0x1fffffff) #endif +/* + * Returns the uncached address of a sdram address + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_AU1X00 +/* We use a 36 bit physical address map here and + cannot access physical memory directly from core */ +#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) +#else /* !CONFIG_AU1X00 */ +#define UNCACHED_SDRAM(a) PHYSADDR(a) +#endif /* CONFIG_AU1X00 */ +#endif /* __ASSEMBLY__ */ /* * Map an address to a certain kernel segment */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 61a799daa4..9c21745c49 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -218,7 +218,7 @@ #define CFG_FLASH_BASE 0xFFF80000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -394,6 +394,11 @@ #endif /************************************************************ + * support BZIP2 compression + ************************************************************/ +#define CONFIG_BZIP2 1 + +/************************************************************ * Ident ************************************************************/ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index b9107ccf7c..2cd5726b95 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -204,7 +204,7 @@ #define CFG_FLASH_BASE 0xFFF80000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */ /* * For booting Linux, the board info and command line data @@ -371,6 +371,11 @@ #endif /************************************************************ + * support BZIP2 compression + ************************************************************/ +#define CONFIG_BZIP2 1 + +/************************************************************ * Ident ************************************************************/ #define VERSION_TAG "released" diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 8a09da6880..9ca80ab670 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -42,6 +42,7 @@ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ #define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ #define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ @@ -63,10 +64,13 @@ /*CFG_CMD_NAND |*/ \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ - /*CFG_CMD_USB |*/ \ + CFG_CMD_USB | \ CFG_CMD_REGINFO | \ + CFG_CMD_FAT | \ CFG_CMD_DATE | \ CFG_CMD_ELF | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ CFG_CMD_BSP) /* this must be included after the definiton of CONFIG_COMMANDS */ @@ -96,11 +100,11 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/*#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)*/ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_MONITOR_LEN (256 * 1024) -#define CFG_MALLOC_LEN (128 * 1024) +#define CFG_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */ /* * Hardware drivers @@ -119,14 +123,13 @@ /************************************************************ * USB support ************************************************************/ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_KEYBOARD -#define CONFIG_USB_STORAGE +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_KEYBOARD 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_DOS_PARTITION 1 /* Enable needed helper functions */ #define CFG_DEVICE_DEREGISTER /* needs device_deregister */ -#endif /************************************************************ * RTC @@ -139,7 +142,11 @@ #define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 5 +/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ +#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ + #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 10.0.0.110 #define CONFIG_SERVERIP 10.0.0.1 @@ -176,6 +183,9 @@ /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +/* support BZIP2 compression */ +#define CONFIG_BZIP2 1 + /************************************************************ * Ident ************************************************************/ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 7aa90b76d8..6f647f2e8b 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -32,9 +32,20 @@ #define CONFIG_DBAU1X00 1 #define CONFIG_AU1X00 1 /* alchemy series cpu */ +#ifdef CONFIG_DBAU1000 /* Also known as Merlot */ -#define CONFIG_DBAU1000 1 /* board, Hardcoded for now */ -#define CONFIG_AU1000 1 /* cpu, Hardcoded for now */ +#define CONFIG_AU1000 1 +#else +#ifdef CONFIG_DBAU1100 +#define CONFIG_AU1100 1 +#else +#ifdef CONFIG_DBAU1500 +#define CONFIG_AU1500 1 +#else +#error "No valid board set" +#endif +#endif +#endif #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ |
