diff options
Diffstat (limited to 'include')
67 files changed, 1065 insertions, 379 deletions
diff --git a/include/altera.h b/include/altera.h index 0327a1b82a..ae5f7eec46 100644 --- a/include/altera.h +++ b/include/altera.h @@ -26,7 +26,7 @@ typedef enum { /* typedef Altera_Family */ min_altera_type, /* insert all new types after this */ Altera_ACEX1K, /* ACEX1K Family */ Altera_CYC2, /* CYCLONII Family */ - Altera_StratixII, /* StratixII Familiy */ + Altera_StratixII, /* StratixII Family */ /* Add new models here */ max_altera_type /* insert all new types before this */ } Altera_Family; /* end, typedef Altera_Family */ diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 2850ed8a69..74df210033 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -65,7 +65,8 @@ typedef struct global_data { struct global_data *new_gd; /* relocated global data */ #ifdef CONFIG_DM - struct udevice *dm_root;/* Root instance for Driver Model */ + struct udevice *dm_root; /* Root instance for Driver Model */ + struct udevice *dm_root_f; /* Pre-relocation root instance */ struct list_head uclass_root; /* Head of core tree */ #endif @@ -85,6 +86,11 @@ typedef struct global_data { #endif unsigned long timebase_h; unsigned long timebase_l; +#ifdef CONFIG_SYS_MALLOC_F_LEN + unsigned long malloc_base; /* base address of early malloc() */ + unsigned long malloc_limit; /* limit address */ + unsigned long malloc_ptr; /* current address */ +#endif struct arch_global_data arch; /* architecture-specific data */ } gd_t; #endif @@ -100,5 +106,6 @@ typedef struct global_data { #define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */ #define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ #define GD_FLG_ENV_READY 0x00080 /* Env. imported into hash table */ +#define GD_FLG_SERIAL_READY 0x00100 /* Pre-reloc serial console ready */ #endif /* __ASM_GENERIC_GBL_DATA_H */ diff --git a/include/axp152.h b/include/axp152.h new file mode 100644 index 0000000000..3e5ccbd0d8 --- /dev/null +++ b/include/axp152.h @@ -0,0 +1,10 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +int axp152_set_dcdc2(int mvolt); +int axp152_set_dcdc3(int mvolt); +int axp152_set_dcdc4(int mvolt); +int axp152_set_ldo2(int mvolt); +int axp152_init(void); diff --git a/include/axp209.h b/include/axp209.h new file mode 100644 index 0000000000..21efce64bb --- /dev/null +++ b/include/axp209.h @@ -0,0 +1,14 @@ +/* + * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +extern int axp209_set_dcdc2(int mvolt); +extern int axp209_set_dcdc3(int mvolt); +extern int axp209_set_ldo2(int mvolt); +extern int axp209_set_ldo3(int mvolt); +extern int axp209_set_ldo4(int mvolt); +extern int axp209_init(void); +extern int axp209_poweron_by_dc(void); +extern int axp209_power_button(void); diff --git a/include/common.h b/include/common.h index 82c0a5a9a6..1d6cb48ff0 100644 --- a/include/common.h +++ b/include/common.h @@ -318,14 +318,14 @@ int arch_early_init_r(void); void board_show_dram(ulong size); /** - * arch_fixup_memory_node() - Write arch-specific memory information to fdt + * arch_fixup_fdt() - Write arch-specific information to fdt * - * Defined in arch/$(ARCH)/lib/bootm.c + * Defined in arch/$(ARCH)/lib/bootm-fdt.c * * @blob: FDT blob to write to * @return 0 if ok, or -ve FDT_ERR_... on failure */ -int arch_fixup_memory_node(void *blob); +int arch_fixup_fdt(void *blob); /* common/flash.c */ void flash_perror (int); @@ -639,6 +639,11 @@ void serial_puts (const char *); int serial_getc (void); int serial_tstc (void); +/* These versions take a stdio_dev pointer */ +struct stdio_dev; +int serial_stub_getc(struct stdio_dev *sdev); +int serial_stub_tstc(struct stdio_dev *sdev); + void _serial_setbrg (const int); void _serial_putc (const char, const int); void _serial_putc_raw(const char, const int); diff --git a/include/compiler.h b/include/compiler.h index 0734ed4942..9afc11be19 100644 --- a/include/compiler.h +++ b/include/compiler.h @@ -48,6 +48,7 @@ # include <machine/endian.h> typedef unsigned long ulong; #endif +#include <time.h> typedef uint8_t __u8; typedef uint16_t __u16; diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 0ffbd41b49..debfc3697e 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -234,8 +234,8 @@ #define CONFIG_VIDEO #define CONFIG_CFB_CONSOLE #define VIDEO_KBD_INIT_FCT (simple_strtol (getenv("console"), NULL, 10)) -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc +#define VIDEO_TSTC_FCT serial_stub_tstc +#define VIDEO_GETC_FCT serial_stub_getc #define CONFIG_VIDEO_SMI_LYNXEM #define CONFIG_VIDEO_LOGO diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 6314b5380d..d45be0f609 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -96,8 +96,8 @@ #define CONFIG_VIDEO_LOGO #define VIDEO_KBD_INIT_FCT 0 /* no KBD dev on MHPC - use serial */ -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc +#define VIDEO_TSTC_FCT serial_stub_tstc +#define VIDEO_GETC_FCT serial_stub_getc #define CONFIG_BR0_WORKAROUND 1 diff --git a/include/configs/alt.h b/include/configs/alt.h new file mode 100644 index 0000000000..9eec4bc231 --- /dev/null +++ b/include/configs/alt.h @@ -0,0 +1,166 @@ +/* + * include/configs/alt.h + * This file is alt board configuration. + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ALT_H +#define __ALT_H + +#undef DEBUG +#define CONFIG_ARMV7 +#define CONFIG_R8A7794 +#define CONFIG_RMOBILE +#define CONFIG_RMOBILE_BOARD_STRING "Alt" +#define CONFIG_SH_GPIO_PFC + +#include <asm/arch/rmobile.h> + +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_RUN +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI + +#define CONFIG_SYS_TEXT_BASE 0xE6304000 +#define CONFIG_SYS_THUMB_BUILD +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_OF_LIBFDT +#define BOARD_LATE_INIT + +#define CONFIG_BAUDRATE 38400 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_TMU_TIMER + +#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#define STACK_AREA_SIZE 0xC000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) + +/* MEMORY */ +#define ALT_SDRAM_BASE 0x40000000 +#define ALT_SDRAM_SIZE (1024u * 1024 * 1024) +#define ALT_UBOOT_SDRAM_SIZE (512 * 1024 * 1024) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_MEMTEST_START (ALT_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 504 * 1024 * 1024) +#undef CONFIG_SYS_ALT_MEMTEST +#undef CONFIG_SYS_MEMTEST_SCRATCH +#undef CONFIG_SYS_LOADS_BAUD_CHANGE + +#define CONFIG_SYS_SDRAM_BASE (ALT_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_SIZE (ALT_UBOOT_SDRAM_SIZE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fc0) +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH_BAR +#define CONFIG_SH_QSPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_QUAD +#define CONFIG_SYS_NO_FLASH + +/* ENV setting */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SECT_SIZE (256 * 1024) +#define CONFIG_ENV_ADDR 0xC0000 +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootm_low=0x40e00000\0" \ + "bootm_size=0x100000\0" \ + +/* SH Ether */ +#define CONFIG_NET_MULTI +#define CONFIG_SH_ETHER +#define CONFIG_SH_ETHER_USE_PORT 0 +#define CONFIG_SH_ETHER_PHY_ADDR 0x1 +#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII +#define CONFIG_SH_ETHER_CACHE_WRITEBACK +#define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) +#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_P_CLK_FREQ + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +/* i2c */ +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 +#define CONFIG_SYS_I2C_SH_BASE0 0xE6500000 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SYS_I2C_SH_BASE1 0xE6510000 +#define CONFIG_SYS_I2C_SH_SPEED1 400000 +#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +#define CONFIG_SYS_I2C_SH_SPEED2 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ + +#endif /* __ALT_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index a48b386477..35ae0e6fb7 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -117,7 +117,7 @@ "bootenv=uEnv.txt\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ + "env import -t -r $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ @@ -254,6 +254,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */ +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif @@ -453,6 +458,7 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_SIZE 0x01000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Reduce SPL size by removing unlikey targets */ #ifdef CONFIG_NOR_BOOT diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index ad4cbd88b8..d826214efe 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -252,17 +252,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 0102ff5b7f..a9c5a8f3af 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -259,18 +259,13 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ /* on one chip */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 974ce986e9..e26204025f 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -33,6 +33,8 @@ #define CONFIG_SYS_I2C_MULTI_EEPROMS /* Power */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C #define CONFIG_POWER_TPS65218 /* SPL defines. */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4d1dd28a91..a3e6452ec1 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -150,6 +150,11 @@ #define CONFIG_ENV_OFFSET 0x300000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_NAND_ONFI_DETECTION +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x400000 /* un-assigned: (using dtb) */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x500000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* GPIO pin + bank to pin ID mapping */ #define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin) diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 5c484ef078..d8d71a94ee 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -258,9 +258,6 @@ */ /* **** PISMO SUPPORT *** */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 5308790fe6..cc53fc9cd7 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -262,8 +262,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_ENV_IS_IN_NAND 1 diff --git a/include/configs/dig297.h b/include/configs/dig297.h index ce205e9b3e..7e47c56453 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -251,10 +251,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_FLASH_BASE boot_flash_base diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 8b9f66a29c..77717a84ae 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -187,7 +187,8 @@ * I2C related stuff */ #ifdef CONFIG_CMD_I2C -#define CONFIG_I2C_MVTWSI +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI #define CONFIG_I2C_MVTWSI_BASE ORION5X_TWSI_BASE #define CONFIG_SYS_I2C_SLAVE 0x0 #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 5d0b85e431..9470ad6abc 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -123,6 +123,7 @@ #define CONFIG_CMD_IMI #define CONFIG_FIT +#define CONFIG_FIT_DISABLE_SHA256 #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index b34e3422da..759e1129c2 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -87,8 +87,8 @@ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (800*480 + 256*4 + 10*1024) #define VIDEO_FB_16BPP_WORD_SWAP #define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc +#define VIDEO_TSTC_FCT serial_stub_tstc +#define VIDEO_GETC_FCT serial_stub_getc /* * BOOTP options diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h new file mode 100644 index 0000000000..3502d10472 --- /dev/null +++ b/include/configs/k2e_evm.h @@ -0,0 +1,37 @@ +/* + * Configuration header file for TI's k2e-evm + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_K2E_EVM_H +#define __CONFIG_K2E_EVM_H + +/* Platform type */ +#define CONFIG_SOC_K2E +#define CONFIG_K2E_EVM + +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2E EVM # " + +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" + +#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c140000\0" +#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" +#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" + +#include <configs/ks2_evm.h> + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c100000 + +/* NAND Configuration */ +#define CONFIG_SYS_NAND_PAGE_2K + +#endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 858329f958..8aa616da0e 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -14,252 +14,27 @@ #define CONFIG_SOC_K2HK #define CONFIG_K2HK_EVM -/* U-Boot Build Configuration */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ -#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_SYS_THUMB_BUILD - -/* SoC Configuration */ -#define CONFIG_ARMV7 -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_ARCH_TIMER -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_TEXT_BASE 0x0c001000 -#define CONFIG_SPL_TARGET "u-boot-spi.gph" -#define CONFIG_SYS_DCACHE_OFF - -/* Memory Configuration */ -#define CONFIG_NR_DRAM_BANKS 2 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 -#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ -#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ - GENERATED_GBL_DATA_SIZE) - -/* SPL SPI Loader Configuration */ -#define CONFIG_SPL_TEXT_BASE 0x0c200000 -#define CONFIG_SPL_PAD_TO 65536 -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) -#define CONFIG_SPL_STACK_SIZE (8 * 1024) -#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SPL_FRAMEWORK - -/* UART Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_MEM32 -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(K2HK_CLK1_6) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* SPI Configuration */ -#define CONFIG_SPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_DAVINCI_SPI -#define CONFIG_SYS_SPI0 -#define CONFIG_SYS_SPI_BASE K2HK_SPI_BASE -#define CONFIG_SYS_SPI0_NUM_CS 4 -#define CONFIG_SYS_SPI1 -#define CONFIG_SYS_SPI1_BASE K2HK_SPI1_BASE -#define CONFIG_SYS_SPI1_NUM_CS 4 -#define CONFIG_SYS_SPI2 -#define CONFIG_SYS_SPI2_NUM_CS 4 -#define CONFIG_SYS_SPI2_BASE K2HK_SPI2_BASE -#define CONFIG_CMD_SPI -#define CONFIG_SYS_SPI_CLK clk_get_rate(K2HK_LPSC_EMIF25_SPI) -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +/* U-Boot general configuration */ +#define CONFIG_SYS_PROMPT "K2HK EVM # " -/* I2C Configuration */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_DAVINCI -#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ -#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 -#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ -#define I2C_BUS_MAX 3 +#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" -/* EEPROM definitions */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" +#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" +#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" +#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" +#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" -/* Network Configuration */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 32 -#define CONFIG_NET_MULTI -#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 -#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 -#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 -#define CONFIG_SYS_SGMII_RATESCALE 2 +#include <configs/ks2_evm.h> -/* AEMIF */ -#define CONFIG_TI_AEMIF -#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_TEXT_BASE 0x0c200000 /* NAND Configuration */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_CMD_NAND_ECCLAYOUT -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_MASK_CLE 0x4000 -#define CONFIG_SYS_NAND_MASK_ALE 0x2000 - -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE -#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x100000 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_MTD_DEVICE -#define CONFIG_RBTREE -#define CONFIG_LZO -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro," \ - "-(ubifs)" -/* U-Boot command configuration */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_SF -#define CONFIG_CMD_EEPROM - -/* U-Boot general configuration */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_PROMPT "K2HK EVM # " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE 2048 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_CMDLINE_EDITING -#define CONFIG_VERSION_VARIABLE -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ - "tftp_root=/\0" \ - "nfs_root=/export\0" \ - "mem_lpae=1\0" \ - "mem_reserve=512M\0" \ - "addr_fdt=0x87000000\0" \ - "addr_kern=0x88000000\0" \ - "addr_mon=0x0c5f0000\0" \ - "addr_uboot=0x87000000\0" \ - "addr_fs=0x82000000\0" \ - "addr_ubi=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "name_fdt=uImage-k2hk-evm.dtb\0" \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage-keystone-evm.bin\0" \ - "name_mon=skern-keystone-evm.bin\0" \ - "name_uboot=u-boot-spi-keystone-evm.gph\0" \ - "name_ubi=keystone-evm-ubifs.ubi\0" \ - "run_mon=mon_install ${addr_mon}\0" \ - "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ - "init_net=run args_all args_net\0" \ - "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot\0" \ - "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ - "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ - "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ - "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ - "burn_uboot=sf probe; sf erase 0 0x100000; " \ - "sf write ${addr_uboot} 0 ${filesize}\0" \ - "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ - "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ - "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ - "${nfs_options} ip=dhcp\0" \ - "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ - "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ - "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ - "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ - "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ - "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ - "burn_ubi=nand erase.part ubifs; " \ - "nand write ${addr_ubi} ubifs ${filesize}\0" \ - "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ - "args_ramfs=setenv bootargs ${bootargs} earlyprintk " \ - "rdinit=/sbin/init rw root=/dev/ram0 " \ - "initrd=0x802000000,9M\0" \ - "no_post=1\0" \ - "mtdparts=mtdparts=davinci_nand.0:" \ - "1024k(bootloader)ro,512k(params)ro,522752k(ubifs)\0" -#define CONFIG_BOOTCOMMAND \ - "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ - "get_kern_${boot} run_mon run_kern" -#define CONFIG_BOOTARGS \ - -/* Linux interfacing */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_SYS_BARGSIZE 1024 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) - -#define CONFIG_SUPPORT_RAW_INITRD - -/* we may include files below only after all above definitions */ -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(K2HK_CLK1_6) +/* Network */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h new file mode 100644 index 0000000000..43db581c75 --- /dev/null +++ b/include/configs/ks2_evm.h @@ -0,0 +1,275 @@ +/* + * Common configuration header file for all Keystone II EVM platforms + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_KS2_EVM_H +#define __CONFIG_KS2_EVM_H + +#define CONFIG_SOC_KEYSTONE + +/* U-Boot Build Configuration */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is a 2nd stage loader */ +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_THUMB_BUILD + +/* SoC Configuration */ +#define CONFIG_ARMV7 +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TEXT_BASE 0x0c001000 +#define CONFIG_SPL_TARGET "u-boot-spi.gph" +#define CONFIG_SYS_DCACHE_OFF + +/* Memory Configuration */ +#define CONFIG_NR_DRAM_BANKS 2 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 +#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ +#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4 MiB */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \ + GENERATED_GBL_DATA_SIZE) + +/* SPL SPI Loader Configuration */ +#define CONFIG_SPL_PAD_TO 65536 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_PAD_TO - 8) +#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SPL_TEXT_BASE + \ + CONFIG_SPL_MAX_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (32 * 1024) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (32 * 1024) +#define CONFIG_SPL_STACK_SIZE (8 * 1024) +#define CONFIG_SPL_STACK (CONFIG_SYS_SPL_MALLOC_START + \ + CONFIG_SYS_SPL_MALLOC_SIZE + \ + CONFIG_SPL_STACK_SIZE - 4) +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SPL_FRAMEWORK + +/* UART Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_MEM32 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 KS2_UART0_BASE +#define CONFIG_SYS_NS16550_COM2 KS2_UART1_BASE +#define CONFIG_SYS_NS16550_CLK clk_get_rate(KS2_CLK1_6) +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* SPI Configuration */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_CMD_SPI +#define CONFIG_SYS_SPI_CLK clk_get_rate(KS2_CLK1_6) +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_SYS_SPI0 +#define CONFIG_SYS_SPI_BASE KS2_SPI0_BASE +#define CONFIG_SYS_SPI0_NUM_CS 4 +#define CONFIG_SYS_SPI1 +#define CONFIG_SYS_SPI1_BASE KS2_SPI1_BASE +#define CONFIG_SYS_SPI1_NUM_CS 4 +#define CONFIG_SYS_SPI2 +#define CONFIG_SYS_SPI2_BASE KS2_SPI2_BASE +#define CONFIG_SYS_SPI2_NUM_CS 4 + +/* Network Configuration */ +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 32 +#define CONFIG_NET_MULTI +#define CONFIG_GET_LINK_STATUS_ATTEMPTS 5 +#define CONFIG_SYS_SGMII_REFCLK_MHZ 312 +#define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 +#define CONFIG_SYS_SGMII_RATESCALE 2 + +/* AEMIF */ +#define CONFIG_TI_AEMIF +#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE + +/* I2C Configuration */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_DAVINCI +#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED1 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE1 0x10 /* SMBus host address */ +#define CONFIG_SYS_DAVINCI_I2C_SPEED2 100000 +#define CONFIG_SYS_DAVINCI_I2C_SLAVE2 0x10 /* SMBus host address */ +#define I2C_BUS_MAX 3 + +/* EEPROM definitions */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_ENV_EEPROM_IS_ON_I2C + +/* NAND Configuration */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_KEYSTONE_RBL_NAND +#define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE CONFIG_ENV_OFFSET +#define CONFIG_SYS_NAND_MASK_CLE 0x4000 +#define CONFIG_SYS_NAND_MASK_ALE 0x2000 +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x30000000, } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" +#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro," \ + "-(ubifs)" + +/* U-Boot command configuration */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_SF +#define CONFIG_CMD_EEPROM + +/* U-Boot general configuration */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE 2048 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +/* EDMA3 */ +#define CONFIG_TI_EDMA3 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "boot=ramfs\0" \ + "tftp_root=/\0" \ + "nfs_root=/export\0" \ + "mem_lpae=1\0" \ + "mem_reserve=512M\0" \ + "addr_fdt=0x87000000\0" \ + "addr_kern=0x88000000\0" \ + KS2_ADDR_MON \ + "addr_uboot=0x87000000\0" \ + "addr_fs=0x82000000\0" \ + "addr_ubi=0x82000000\0" \ + "addr_secdb_key=0xc000000\0" \ + "fdt_high=0xffffffff\0" \ + KS2_FDT_NAME \ + "name_fs=arago-console-image.cpio.gz\0" \ + "name_kern=uImage\0" \ + KS2_NAME_MON \ + NAME_UBOOT \ + NAME_UBI \ + "run_mon=mon_install ${addr_mon}\0" \ + "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ + "init_net=run args_all args_net\0" \ + "init_ubi=run args_all args_ubi; " \ + "ubi part ubifs; ubifsmount boot;" \ + "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ + "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ + "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \ + "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \ + "get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \ + "burn_uboot_spi=sf probe; sf erase 0 0x100000; " \ + "sf write ${addr_uboot} 0 ${filesize}\0" \ + "burn_uboot_nand=nand erase 0 0x100000; " \ + "nand write ${addr_uboot} 0 ${filesize}\0" \ + "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ + KS2_ARGS_UBI \ + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ + "${nfs_options} ip=dhcp\0" \ + "nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \ + "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ + "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \ + "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \ + "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \ + "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \ + "burn_ubi=nand erase.part ubifs; " \ + "nand write ${addr_ubi} ubifs ${filesize}\0" \ + "init_ramfs=run args_all args_ramfs get_fs_ramfs\0" \ + "args_ramfs=setenv bootargs ${bootargs} " \ + "rdinit=/sbin/init rw root=/dev/ram0 " \ + "initrd=0x802000000,9M\0" \ + "no_post=1\0" \ + "mtdparts=mtdparts=davinci_nand.0:" \ + "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0" + +#define CONFIG_BOOTCOMMAND \ + "run init_${boot} get_fdt_${boot} get_mon_${boot} " \ + "get_kern_${boot} run_mon run_kern" + +#define CONFIG_BOOTARGS \ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_SYS_BARGSIZE 1024 +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) +#define CONFIG_LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) + +#define CONFIG_SUPPORT_RAW_INITRD + +/* we may include files below only after all above definitions */ +#include <asm/arch/hardware.h> +#include <asm/arch/clock.h> +#define CONFIG_SYS_HZ_CLOCK clk_get_rate(KS2_CLK1_6) + +/* Maximum memory size for relocated U-boot at the end of the DDR3 memory + which is NOT applicable for DDR ECC test */ +#define CONFIG_MAX_UBOOT_MEM_SIZE (4 << 20) /* 4 MiB */ + +#endif /* __CONFIG_KS2_EVM_H */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 47244c0034..75abb602cf 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -316,10 +316,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND #define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index e0c0fac8e1..43c1617a5e 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -220,8 +220,6 @@ #ifdef ONENAND_SUPPORT -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS @@ -263,9 +261,10 @@ #define VIDEO_TSTC_FCT rx51_kp_tstc #define VIDEO_GETC_FCT rx51_kp_getc #ifndef __ASSEMBLY__ +struct stdio_dev; int rx51_kp_init(void); -int rx51_kp_tstc(void); -int rx51_kp_getc(void); +int rx51_kp_tstc(struct stdio_dev *sdev); +int rx51_kp_getc(struct stdio_dev *sdev); #endif #ifndef MTDPARTS_DEFAULT diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 3782049ee6..644e97f4c4 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -195,7 +195,7 @@ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ + "env import -t -r $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "mpurate=${mpurate} " \ @@ -266,13 +266,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ @@ -309,5 +304,11 @@ #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index ae4ce63f67..739d392edc 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -95,9 +95,6 @@ /* * PISMO support */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - /* Monitor at start of flash - Reserve 2 sectors */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -205,12 +202,12 @@ * NAND / OneNAND */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #endif diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 79daabd6bb..006c9a9c0d 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -146,8 +146,6 @@ */ #ifdef CONFIG_BOOT_ONENAND -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */ - #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ @@ -158,7 +156,6 @@ #endif #ifdef CONFIG_NAND -#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ @@ -199,6 +196,13 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif #endif /* __IGEP00X0_H */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 8dcbba3c40..717c935d2c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -277,16 +277,12 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_FLASH_BASE ONENAND_MAP #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index f7483a0827..e66f30655d 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -173,12 +173,8 @@ 0x01F00000) /* 31MB */ /* FLASH and environment organization */ -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ @@ -220,5 +216,11 @@ #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index da67787e69..c22c1fc6aa 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -220,15 +220,10 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 3efe4cf815..93f4d627a1 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -70,6 +70,12 @@ "4m(kernel),-(fs)" #if defined(CONFIG_CMD_NAND) +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #endif @@ -165,13 +171,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE #endif /* Monitor at start of flash */ diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 85104057a9..4684ad6852 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -159,6 +159,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +/* NAND: SPL falcon mode configs */ +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* un-assigned */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif /* * USB configuration. We enable MUSB support, both for host and for diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index ff48598dd5..60f24895e5 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_PREBOOT \ "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \ - "env import -t ${loadaddr} ${filesize}; " \ + "env import -t -r ${loadaddr} ${filesize}; " \ "fi" #define ENV_DEVICE_SETTINGS \ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 12b69d9a24..bf2d25c871 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -68,8 +68,10 @@ #define CONFIG_EFI_PARTITION /* - * Size of malloc() pool, although we don't actually use this yet. + * Size of malloc() pool, before and after relocation */ +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */ #define CONFIG_SYS_HUSH_PARSER diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h new file mode 100644 index 0000000000..037f9952f8 --- /dev/null +++ b/include/configs/sun4i.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * Configuration settings for the Allwinner A10 (sun4i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * A10 specific configuration + */ +#define CONFIG_SUN4I /* sun4i SoC generation */ +#define CONFIG_CLK_FULL_SPEED 1008000000 + +#define CONFIG_SYS_PROMPT "sun4i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */ diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h new file mode 100644 index 0000000000..c6138b7cd4 --- /dev/null +++ b/include/configs/sun5i.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net> + * + * Configuration settings for the Allwinner A13 (sun5i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SUN5I /* sun5i SoC generation */ +#define CONFIG_CLK_FULL_SPEED 1008000000 + +#define CONFIG_SYS_PROMPT "sun5i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 9b693f7039..d9be1046b0 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -13,6 +13,7 @@ * A20 specific configuration */ #define CONFIG_SUN7I /* sun7i SoC generation */ +#define CONFIG_CLK_FULL_SPEED 912000000 #define CONFIG_SYS_PROMPT "sun7i# " diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 5d72d62f14..845b004a27 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -70,7 +70,6 @@ #define CONFIG_CMD_MMC #define CONFIG_MMC_SUNXI #define CONFIG_MMC_SUNXI_SLOT 0 -#define CONFIG_MMC_SUNXI_USE_DMA #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ @@ -162,7 +161,31 @@ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS +/* I2C */ +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x7f +#define CONFIG_CMD_I2C + +/* PMU */ +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || defined CONFIG_AXP221_POWER +#define CONFIG_SPL_POWER_SUPPORT +#endif + +#ifndef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 1 /* UART0 */ +#endif + +/* GPIO */ +#define CONFIG_SUNXI_GPIO +#define CONFIG_CMD_GPIO + +/* Ethernet support */ +#ifdef CONFIG_SUNXI_EMAC +#define CONFIG_MII /* MII PHY management */ +#endif #ifdef CONFIG_SUNXI_GMAC #define CONFIG_DESIGNWARE_ETH /* GMAC can use designware driver */ @@ -188,6 +211,8 @@ #define CONFIG_ENV_IS_NOWHERE #endif +#define CONFIG_MISC_INIT_R + #ifndef CONFIG_SPL_BUILD #include <config_distro_defaults.h> #endif diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 0c2f0f19c8..aa0ea162d2 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -181,10 +181,6 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 1b0fee9a80..9fc31bed6a 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -22,6 +22,7 @@ #define CONFIG_OMAP_GPIO #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define MACH_TYPE_OMAP3_TAO3530 2836 @@ -253,13 +254,8 @@ */ /* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#define CONFIG_SYS_FLASH_BASE NAND_BASE /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 6e0bf09058..85c027c1d2 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -243,13 +243,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif - /* spl export command */ #define CONFIG_CMD_SPL #endif @@ -275,7 +268,6 @@ #define CONFIG_SPL_NAND_ECC #define CONFIG_SPL_MTD_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* !CONFIG_NOR_BOOT */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 80985a2655..6c2f65305f 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -35,6 +35,8 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap3.h> +#define CONFIG_SYS_GENERIC_BOARD + /* Display CPU and Board information */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -315,8 +317,6 @@ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M - #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index fa252c0b13..690cacbc94 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -339,4 +339,6 @@ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_GENERIC_BOARD + #endif /* __CONFIG_ZYNQ_COMMON_H */ diff --git a/include/cpsw.h b/include/cpsw.h index a73843d2f7..547b40c57b 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -44,6 +44,7 @@ struct cpsw_platform_data { struct cpsw_slave_data *slave_data; void (*control)(int enabled); u32 host_port_num; + u32 active_slave; u8 version; }; diff --git a/include/dm/device-internal.h b/include/dm/device-internal.h index 26e5cf530e..7005d03d08 100644 --- a/include/dm/device-internal.h +++ b/include/dm/device-internal.h @@ -45,12 +45,14 @@ int device_bind(struct udevice *parent, struct driver *drv, * tree. * * @parent: Pointer to device's parent + * @pre_reloc_only: If true, bind the driver only if its DM_INIT_F flag is set. + * If false bind the driver always. * @info: Name and platdata for this device * @devp: Returns a pointer to the bound device * @return 0 if OK, -ve on error */ -int device_bind_by_name(struct udevice *parent, const struct driver_info *info, - struct udevice **devp); +int device_bind_by_name(struct udevice *parent, bool pre_reloc_only, + const struct driver_info *info, struct udevice **devp); /** * device_probe() - Probe a device, activating it diff --git a/include/dm/device.h b/include/dm/device.h index ae75a3f54d..c8a4072bcf 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -23,6 +23,9 @@ struct driver_info; /* DM is responsible for allocating and freeing platdata */ #define DM_FLAG_ALLOC_PDATA (1 << 1) +/* DM should init this device prior to relocation */ +#define DM_FLAG_PRE_RELOC (1 << 2) + /** * struct udevice - An instance of a driver * @@ -48,10 +51,13 @@ struct driver_info; * @priv: Private data for this device * @uclass: Pointer to uclass for this device * @uclass_priv: The uclass's private data for this device + * @parent_priv: The parent's private data for this device * @uclass_node: Used by uclass to link its devices * @child_head: List of children of this device * @sibling_node: Next device in list of all devices * @flags: Flags for this device DM_FLAG_... + * @req_seq: Requested sequence number for this device (-1 = any) + * @seq: Allocated sequence number for this device (-1 = none) */ struct udevice { struct driver *driver; @@ -62,12 +68,18 @@ struct udevice { void *priv; struct uclass *uclass; void *uclass_priv; + void *parent_priv; struct list_head uclass_node; struct list_head child_head; struct list_head sibling_node; uint32_t flags; + int req_seq; + int seq; }; +/* Maximum sequence number supported */ +#define DM_MAX_SEQ 999 + /* Returns the operations for a device */ #define device_get_ops(dev) (dev->driver->ops) @@ -106,6 +118,10 @@ struct udevice_id { * @remove: Called to remove a device, i.e. de-activate it * @unbind: Called to unbind a device from its driver * @ofdata_to_platdata: Called before probe to decode device tree data + * @child_pre_probe: Called before a child device is probed. The device has + * memory allocated but it has not yet been probed. + * @child_post_remove: Called after a child device is removed. The device + * has memory allocated but its device_remove() method has been called. * @priv_auto_alloc_size: If non-zero this is the size of the private data * to be allocated in the device's ->priv pointer. If zero, then the driver * is responsible for allocating any data required. @@ -114,9 +130,13 @@ struct udevice_id { * This is typically only useful for device-tree-aware drivers (those with * an of_match), since drivers which use platdata will have the data * provided in the U_BOOT_DEVICE() instantiation. - * ops: Driver-specific operations. This is typically a list of function + * @per_child_auto_alloc_size: Each device can hold private data owned by + * its parent. If required this will be automatically allocated if this + * value is non-zero. + * @ops: Driver-specific operations. This is typically a list of function * pointers defined by the driver, to implement driver functions required by * the uclass. + * @flags: driver flags - see DM_FLAGS_... */ struct driver { char *name; @@ -127,9 +147,13 @@ struct driver { int (*remove)(struct udevice *dev); int (*unbind)(struct udevice *dev); int (*ofdata_to_platdata)(struct udevice *dev); + int (*child_pre_probe)(struct udevice *dev); + int (*child_post_remove)(struct udevice *dev); int priv_auto_alloc_size; int platdata_auto_alloc_size; + int per_child_auto_alloc_size; const void *ops; /* driver-specific operations */ + uint32_t flags; }; /* Declare a new U-Boot driver */ @@ -147,6 +171,20 @@ struct driver { void *dev_get_platdata(struct udevice *dev); /** + * dev_get_parentdata() - Get the parent data for a device + * + * The parent data is data stored in the device but owned by the parent. + * For example, a USB device may have parent data which contains information + * about how to talk to the device over USB. + * + * This checks that dev is not NULL, but no other checks for now + * + * @dev Device to check + * @return parent data, or NULL if none + */ +void *dev_get_parentdata(struct udevice *dev); + +/** * dev_get_priv() - Get the private data for a device * * This checks that dev is not NULL, but no other checks for now @@ -156,4 +194,84 @@ void *dev_get_platdata(struct udevice *dev); */ void *dev_get_priv(struct udevice *dev); +/** + * device_get_child() - Get the child of a device by index + * + * Returns the numbered child, 0 being the first. This does not use + * sequence numbers, only the natural order. + * + * @dev: Parent device to check + * @index: Child index + * @devp: Returns pointer to device + */ +int device_get_child(struct udevice *parent, int index, struct udevice **devp); + +/** + * device_find_child_by_seq() - Find a child device based on a sequence + * + * This searches for a device with the given seq or req_seq. + * + * For seq, if an active device has this sequence it will be returned. + * If there is no such device then this will return -ENODEV. + * + * For req_seq, if a device (whether activated or not) has this req_seq + * value, that device will be returned. This is a strong indication that + * the device will receive that sequence when activated. + * + * @parent: Parent device + * @seq_or_req_seq: Sequence number to find (0=first) + * @find_req_seq: true to find req_seq, false to find seq + * @devp: Returns pointer to device (there is only one per for each seq). + * Set to NULL if none is found + * @return 0 if OK, -ve on error + */ +int device_find_child_by_seq(struct udevice *parent, int seq_or_req_seq, + bool find_req_seq, struct udevice **devp); + +/** + * device_get_child_by_seq() - Get a child device based on a sequence + * + * If an active device has this sequence it will be returned. If there is no + * such device then this will check for a device that is requesting this + * sequence. + * + * The device is probed to activate it ready for use. + * + * @parent: Parent device + * @seq: Sequence number to find (0=first) + * @devp: Returns pointer to device (there is only one per for each seq) + * Set to NULL if none is found + * @return 0 if OK, -ve on error + */ +int device_get_child_by_seq(struct udevice *parent, int seq, + struct udevice **devp); + +/** + * device_find_child_by_of_offset() - Find a child device based on FDT offset + * + * Locates a child device by its device tree offset. + * + * @parent: Parent device + * @of_offset: Device tree offset to find + * @devp: Returns pointer to device if found, otherwise this is set to NULL + * @return 0 if OK, -ve on error + */ +int device_find_child_by_of_offset(struct udevice *parent, int of_offset, + struct udevice **devp); + +/** + * device_get_child_by_of_offset() - Get a child device based on FDT offset + * + * Locates a child device by its device tree offset. + * + * The device is probed to activate it ready for use. + * + * @parent: Parent device + * @of_offset: Device tree offset to find + * @devp: Returns pointer to device if found, otherwise this is set to NULL + * @return 0 if OK, -ve on error + */ +int device_get_child_by_of_offset(struct udevice *parent, int seq, + struct udevice **devp); + #endif diff --git a/include/dm/lists.h b/include/dm/lists.h index 49d87e6176..87a3af59c2 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -42,7 +42,7 @@ struct uclass_driver *lists_uclass_lookup(enum uclass_id id); * @early_only: If true, bind only drivers with the DM_INIT_F flag. If false * bind all drivers. */ -int lists_bind_drivers(struct udevice *parent); +int lists_bind_drivers(struct udevice *parent, bool pre_reloc_only); /** * lists_bind_fdt() - bind a device tree node diff --git a/include/dm/platdata.h b/include/dm/platdata.h index 0ef3353e74..2bc8b147ed 100644 --- a/include/dm/platdata.h +++ b/include/dm/platdata.h @@ -11,9 +11,15 @@ #ifndef _DM_PLATDATA_H #define _DM_PLATDATA_H +/** + * struct driver_info - Information required to instantiate a device + * + * @name: Device name + * @platdata: Driver-specific platform data + */ struct driver_info { - const char *name; - const void *platdata; + const char *name; + const void *platdata; }; #define U_BOOT_DEVICE(__name) \ diff --git a/include/dm/root.h b/include/dm/root.h index a4826a6e3c..c7f0c1d5ca 100644 --- a/include/dm/root.h +++ b/include/dm/root.h @@ -26,19 +26,66 @@ struct udevice *dm_root(void); * * This scans all available platdata and creates drivers for each * + * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC + * flag. If false bind all drivers. * @return 0 if OK, -ve on error */ -int dm_scan_platdata(void); +int dm_scan_platdata(bool pre_reloc_only); /** * dm_scan_fdt() - Scan the device tree and bind drivers * - * This scans the device tree and creates a driver for each node + * This scans the device tree and creates a driver for each node. Only + * the top-level subnodes are examined. * * @blob: Pointer to device tree blob + * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC + * flag. If false bind all drivers. * @return 0 if OK, -ve on error */ -int dm_scan_fdt(const void *blob); +int dm_scan_fdt(const void *blob, bool pre_reloc_only); + +/** + * dm_scan_fdt_node() - Scan the device tree and bind drivers for a node + * + * This scans the subnodes of a device tree node and and creates a driver + * for each one. + * + * @parent: Parent device for the devices that will be created + * @blob: Pointer to device tree blob + * @offset: Offset of node to scan + * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC + * flag. If false bind all drivers. + * @return 0 if OK, -ve on error + */ +int dm_scan_fdt_node(struct udevice *parent, const void *blob, int offset, + bool pre_reloc_only); + +/** + * dm_scan_other() - Scan for other devices + * + * Some devices may not be visible to Driver Model. This weak function can + * be provided by boards which wish to create their own devices + * programmaticaly. They should do this by calling device_bind() on each + * device. + * + * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC + * flag. If false bind all drivers. + */ +int dm_scan_other(bool pre_reloc_only); + +/** + * dm_init_and_scan() - Initialise Driver Model structures and scan for devices + * + * This function initialises the roots of the driver tree and uclass trees, + * then scans and binds available devices from platform data and the FDT. + * This calls dm_init() to set up Driver Model structures. + * + * @pre_reloc_only: If true, bind only drivers with the DM_FLAG_PRE_RELOC + * flag. If false bind all drivers. + * @return 0 if OK, -ve on error + */ +int dm_init_and_scan(bool pre_reloc_only); /** * dm_init() - Initialise Driver Model structures @@ -50,4 +97,12 @@ int dm_scan_fdt(const void *blob); */ int dm_init(void); +/** + * dm_uninit - Uninitialise Driver Model structures + * + * All devices will be removed and unbound + * @return 0 if OK, -ve on error + */ +int dm_uninit(void); + #endif diff --git a/include/dm/test.h b/include/dm/test.h index 409f1a3667..235d728bfb 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -82,6 +82,17 @@ struct dm_test_uclass_priv { int total_add; }; +/** + * struct dm_test_parent_data - parent's information on each child + * + * @sum: Test value used to check parent data works correctly + * @flag: Used to track calling of parent operations + */ +struct dm_test_parent_data { + int sum; + int flag; +}; + /* * Operation counts for the test driver, used to check that each method is * called correctly @@ -100,6 +111,7 @@ extern struct dm_test_state global_test_state; * @fail_count: Number of tests that failed * @force_fail_alloc: Force all memory allocs to fail * @skip_post_probe: Skip uclass post-probe processing + * @removed: Used to keep track of a device that was removed */ struct dm_test_state { struct udevice *root; @@ -107,6 +119,7 @@ struct dm_test_state { int fail_count; int force_fail_alloc; int skip_post_probe; + struct udevice *removed; }; /* Test flags for each test */ @@ -156,6 +169,15 @@ int dm_check_operations(struct dm_test_state *dms, struct udevice *dev, uint32_t base, struct dm_test_priv *priv); /** + * dm_check_devices() - check the devices respond to operations correctly + * + * @dms: Overall test state + * @num_devices: Number of test devices to check + * @return 0 if OK, -ve on error + */ +int dm_check_devices(struct dm_test_state *dms, int num_devices); + +/** * dm_test_main() - Run all the tests * * This runs all available driver model tests diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index f0e691c18c..dd95fca428 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -17,9 +17,10 @@ enum uclass_id { UCLASS_DEMO, UCLASS_TEST, UCLASS_TEST_FDT, + UCLASS_TEST_BUS, /* U-Boot uclasses start here */ - UCLASS_GPIO, + UCLASS_GPIO, /* Bank of general-purpose I/O pins */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index 1434db3eb4..f718f37aff 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -82,4 +82,27 @@ struct uclass *uclass_find(enum uclass_id key); */ int uclass_destroy(struct uclass *uc); +/** + * uclass_find_device_by_seq() - Find uclass device based on ID and sequence + * + * This searches for a device with the given seq or req_seq. + * + * For seq, if an active device has this sequence it will be returned. + * If there is no such device then this will return -ENODEV. + * + * For req_seq, if a device (whether activated or not) has this req_seq + * value, that device will be returned. This is a strong indication that + * the device will receive that sequence when activated. + * + * The device is NOT probed, it is merely returned. + * + * @id: ID to look up + * @seq_or_req_seq: Sequence number to find (0=first) + * @find_req_seq: true to find req_seq, false to find seq + * @devp: Returns pointer to device (there is only one per for each seq) + * @return 0 if OK, -ve on error + */ +int uclass_find_device_by_seq(enum uclass_id id, int seq_or_req_seq, + bool find_req_seq, struct udevice **devp); + #endif diff --git a/include/dm/uclass.h b/include/dm/uclass.h index afd9923fb3..8d09ecff7b 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -98,7 +98,7 @@ int uclass_get(enum uclass_id key, struct uclass **ucp); * * The device is probed to activate it ready for use. * - * id: ID to look up + * @id: ID to look up * @index: Device number within that uclass (0=first) * @devp: Returns pointer to device (there is only one per for each ID) * @return 0 if OK, -ve on error @@ -106,6 +106,38 @@ int uclass_get(enum uclass_id key, struct uclass **ucp); int uclass_get_device(enum uclass_id id, int index, struct udevice **devp); /** + * uclass_get_device_by_seq() - Get a uclass device based on an ID and sequence + * + * If an active device has this sequence it will be returned. If there is no + * such device then this will check for a device that is requesting this + * sequence. + * + * The device is probed to activate it ready for use. + * + * @id: ID to look up + * @seq: Sequence number to find (0=first) + * @devp: Returns pointer to device (there is only one for each seq) + * @return 0 if OK, -ve on error + */ +int uclass_get_device_by_seq(enum uclass_id id, int seq, struct udevice **devp); + +/** + * uclass_get_device_by_of_offset() - Get a uclass device by device tree node + * + * This searches the devices in the uclass for one attached to the given + * device tree node. + * + * The device is probed to activate it ready for use. + * + * @id: ID to look up + * @node: Device tree offset to search for (if -ve then -ENODEV is returned) + * @devp: Returns pointer to device (there is only one for each node) + * @return 0 if OK, -ve on error + */ +int uclass_get_device_by_of_offset(enum uclass_id id, int node, + struct udevice **devp); + +/** * uclass_first_device() - Get the first device in a uclass * * @id: Uclass ID to look up @@ -124,6 +156,21 @@ int uclass_first_device(enum uclass_id id, struct udevice **devp); int uclass_next_device(struct udevice **devp); /** + * uclass_resolve_seq() - Resolve a device's sequence number + * + * On entry dev->seq is -1, and dev->req_seq may be -1 (to allocate a + * sequence number automatically, or >= 0 to select a particular number. + * If the requested sequence number is in use, then this device will + * be allocated another one. + * + * Note that the device's seq value is not changed by this function. + * + * @dev: Device for which to allocate sequence number + * @return sequence number allocated, or -ve on error + */ +int uclass_resolve_seq(struct udevice *dev); + +/** * uclass_foreach_dev() - Helper function to iteration through devices * * This creates a for() loop which works through the available devices in diff --git a/include/env_callback.h b/include/env_callback.h index f90a7fa3b6..ab4e115fb0 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -60,7 +60,7 @@ void env_callback_init(ENTRY *var_entry); */ #ifdef CONFIG_SPL_BUILD #define U_BOOT_ENV_CALLBACK(name, callback) \ - static inline void _u_boot_env_noop_##name(void) \ + static inline __maybe_unused void _u_boot_env_noop_##name(void) \ { \ (void)callback; \ } diff --git a/include/fdtdec.h b/include/fdtdec.h index a7e6ee7fdf..856e6cf766 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -345,6 +345,35 @@ int fdtdec_find_aliases_for_id(const void *blob, const char *name, int fdtdec_add_aliases_for_id(const void *blob, const char *name, enum fdt_compat_id id, int *node_list, int maxcount); +/** + * Get the alias sequence number of a node + * + * This works out whether a node is pointed to by an alias, and if so, the + * sequence number of that alias. Aliases are of the form <base><num> where + * <num> is the sequence number. For example spi2 would be sequence number + * 2. + * + * @param blob Device tree blob (if NULL, then error is returned) + * @param base Base name for alias (before the underscore) + * @param node Node to look up + * @param seqp This is set to the sequence number if one is found, + * but otherwise the value is left alone + * @return 0 if a sequence was found, -ve if not + */ +int fdtdec_get_alias_seq(const void *blob, const char *base, int node, + int *seqp); + +/** + * Get the offset of the given alias node + * + * This looks up an alias in /aliases then finds the offset of that node. + * + * @param blob Device tree blob (if NULL, then error is returned) + * @param name Alias name, e.g. "console" + * @return Node offset referred to by that alias, or -ve FDT_ERR_... + */ +int fdtdec_get_alias_node(const void *blob, const char *name); + /* * Get the name for a compatible ID * diff --git a/include/i8042.h b/include/i8042.h index 963061920c..58c85ec5f0 100644 --- a/include/i8042.h +++ b/include/i8042.h @@ -72,8 +72,10 @@ void i8042_flush(void); */ int i8042_disable(void); +struct stdio_dev; + int i8042_kbd_init(void); -int i8042_tstc(void); -int i8042_getc(void); +int i8042_tstc(struct stdio_dev *dev); +int i8042_getc(struct stdio_dev *dev); #endif /* _I8042_H_ */ diff --git a/include/ide.h b/include/ide.h index 0424d045a1..c2a48e0b37 100644 --- a/include/ide.h +++ b/include/ide.h @@ -66,12 +66,16 @@ void ide_write_data(int dev, const ulong *sect_buf, int words); /* * I/O function overrides */ +unsigned char ide_inb(int dev, int port); +void ide_outb(int dev, int port, unsigned char val); void ide_input_swap_data(int dev, ulong *sect_buf, int words); void ide_input_data(int dev, ulong *sect_buf, int words); void ide_output_data(int dev, const ulong *sect_buf, int words); void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts); void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts); +void ide_led(uchar led, uchar status); + /** * board_start_ide() - Start up the board IDE interfac * diff --git a/include/linux/compat.h b/include/linux/compat.h index 3fdfb399b5..35e216e06e 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -57,4 +57,23 @@ , __FILE__, __LINE__); } #define PAGE_SIZE 4096 + +/** + * upper_32_bits - return MSB bits 32-63 of a number if little endian, or + * return MSB bits 0-31 of a number if big endian. + * @n: the number we're accessing + * + * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress + * the "right shift count >= width of type" warning when that quantity is + * 32-bits. + */ +#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) + +/** + * lower_32_bits - return LSB bits 0-31 of a number if little endian, or + * return LSB bits 32-63 of a number if big endian. + * @n: the number we're accessing + */ +#define lower_32_bits(n) ((u32)(n)) + #endif diff --git a/include/mmc.h b/include/mmc.h index f46572e177..7f5f9bc8ca 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -327,10 +327,11 @@ struct mmc *find_mmc_device(int dev_num); int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); int get_mmc_num(void); -int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); +int board_mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); +int board_mmc_getwp(struct mmc *mmc); int mmc_set_dsr(struct mmc *mmc, u16 val); /* Function to change the size of boot partition and rpmb partitions */ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, @@ -385,6 +386,7 @@ int mmc_legacy_init(int verbose); #endif int board_mmc_init(bd_t *bis); +int cpu_mmc_init(bd_t *bis); /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT diff --git a/include/netdev.h b/include/netdev.h index 63481eca22..e45dd7abec 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -78,8 +78,8 @@ int sh_eth_initialize(bd_t *bis); int skge_initialize(bd_t *bis); int smc91111_initialize(u8 dev_num, int base_addr); int smc911x_initialize(u8 dev_num, int base_addr); +int sunxi_emac_initialize(bd_t *bis); int sunxi_gmac_initialize(bd_t *bis); -int sunxi_wemac_initialize(bd_t *bis); int tsi108_eth_initialize(bd_t *bis); int uec_standard_init(bd_t *bis); int uli526x_initialize(bd_t *bis); diff --git a/include/power/pmic.h b/include/power/pmic.h index a62e6c90a5..afbc5aab7e 100644 --- a/include/power/pmic.h +++ b/include/power/pmic.h @@ -79,6 +79,7 @@ struct pmic { }; int pmic_init(unsigned char bus); +int power_init_board(void); int pmic_dialog_init(unsigned char bus); int check_reg(struct pmic *p, u32 reg); struct pmic *pmic_alloc(void); diff --git a/include/power/tps65218.h b/include/power/tps65218.h index 67aa2f8c8d..f8f33b8b16 100644 --- a/include/power/tps65218.h +++ b/include/power/tps65218.h @@ -60,4 +60,5 @@ enum { int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val, uchar mask); int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel); +int power_tps65218_init(unsigned char bus); #endif /* __POWER_TPS65218_H__ */ diff --git a/include/search.h b/include/search.h index ae3efc43ca..9701efb2df 100644 --- a/include/search.h +++ b/include/search.h @@ -102,7 +102,8 @@ extern ssize_t hexport_r(struct hsearch_data *__htab, */ extern int himport_r(struct hsearch_data *__htab, const char *__env, size_t __size, const char __sep, - int __flag, int nvars, char * const vars[]); + int __flag, int __crlf_is_lf, int nvars, + char * const vars[]); /* Walk the whole table calling the callback on each element */ extern int hwalk_r(struct hsearch_data *__htab, int (*callback)(ENTRY *)); diff --git a/include/status_led.h b/include/status_led.h index 0eb91b8695..b8aaaf78fc 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state); # include <asm/status_led.h> #endif +#endif /* CONFIG_STATUS_LED */ + /* * Coloured LEDs API */ #ifndef __ASSEMBLY__ -extern void coloured_LED_init (void); -extern void red_led_on(void); -extern void red_led_off(void); -extern void green_led_on(void); -extern void green_led_off(void); -extern void yellow_led_on(void); -extern void yellow_led_off(void); -extern void blue_led_on(void); -extern void blue_led_off(void); +void coloured_LED_init(void); +void red_led_on(void); +void red_led_off(void); +void green_led_on(void); +void green_led_off(void); +void yellow_led_on(void); +void yellow_led_off(void); +void blue_led_on(void); +void blue_led_off(void); #else .extern LED_init .extern red_led_on @@ -297,6 +299,4 @@ extern void blue_led_off(void); .extern blue_led_off #endif -#endif /* CONFIG_STATUS_LED */ - #endif /* _STATUS_LED_H_ */ diff --git a/include/stdio_dev.h b/include/stdio_dev.h index e6dc12ac39..a7d0825c7e 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -27,18 +27,21 @@ struct stdio_dev { /* GENERAL functions */ - int (*start) (void); /* To start the device */ - int (*stop) (void); /* To stop the device */ + int (*start)(struct stdio_dev *dev); /* To start the device */ + int (*stop)(struct stdio_dev *dev); /* To stop the device */ /* OUTPUT functions */ - void (*putc) (const char c); /* To put a char */ - void (*puts) (const char *s); /* To put a string (accelerator) */ + /* To put a char */ + void (*putc)(struct stdio_dev *dev, const char c); + /* To put a string (accelerator) */ + void (*puts)(struct stdio_dev *dev, const char *s); /* INPUT functions */ - int (*tstc) (void); /* To test if a char is ready... */ - int (*getc) (void); /* To get that char */ + /* To test if a char is ready... */ + int (*tstc)(struct stdio_dev *dev); + int (*getc)(struct stdio_dev *dev); /* To get that char */ /* Other functions */ @@ -74,10 +77,12 @@ extern char *stdio_names[MAX_FILES]; * PROTOTYPES */ int stdio_register (struct stdio_dev * dev); +int stdio_register_dev(struct stdio_dev *dev, struct stdio_dev **devp); int stdio_init (void); void stdio_print_current_devices(void); #ifdef CONFIG_SYS_STDIO_DEREGISTER int stdio_deregister(const char *devname); +int stdio_deregister_dev(struct stdio_dev *dev); #endif struct list_head* stdio_get_list(void); struct stdio_dev* stdio_get_by_name(const char* name); diff --git a/include/video.h b/include/video.h index 0ff857bc9f..673aa2ec56 100644 --- a/include/video.h +++ b/include/video.h @@ -11,9 +11,11 @@ /* Video functions */ -int video_init (void *videobase); -void video_putc (const char c); -void video_puts (const char *s); +struct stdio_dev; + +int video_init(void *videobase); +void video_putc(struct stdio_dev *dev, const char c); +void video_puts(struct stdio_dev *dev, const char *s); /** * Display a BMP format bitmap on the screen |
