diff options
Diffstat (limited to 'include')
55 files changed, 1532 insertions, 304 deletions
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index a82955c1bf..9fe94c7e4c 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -89,6 +89,7 @@ #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ #define AT91SAM9_PMC_MDIV_6 (3 << 8) #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ #define AT91_PMC_PDIV_1 (0 << 12) diff --git a/include/asm-arm/arch-at91/at91sam9_matrix.h b/include/asm-arm/arch-at91/at91sam9_matrix.h index 913f374790..6d97189d27 100644 --- a/include/asm-arm/arch-at91/at91sam9_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9_matrix.h @@ -21,6 +21,8 @@ #include <asm/arch/at91sam9rl_matrix.h> #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9_matrix.h> +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#include <asm/arch/at91sam9g45_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" #endif diff --git a/include/asm-arm/arch-at91/at91sam9g45.h b/include/asm-arm/arch-at91/at91sam9g45.h new file mode 100644 index 0000000000..0feed9c28b --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9g45.h @@ -0,0 +1,139 @@ +/* + * Chip-specific header file for the AT91SAM9M1x family + * + * Copyright (C) 2008 Atmel Corporation. + * + * Common definitions. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_H +#define AT91SAM9G45_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Controller Interrupt */ +#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ +#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ +#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ +#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ +#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ +#define AT91SAM9G45_ID_US0 7 /* USART 0 */ +#define AT91SAM9G45_ID_US1 8 /* USART 1 */ +#define AT91SAM9G45_ID_US2 9 /* USART 2 */ +#define AT91SAM9G45_ID_US3 10 /* USART 3 */ +#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ +#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ +#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ +#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ +#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ +#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ +#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ +#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ +#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ +#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ +#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ +#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ +#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ +#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ +#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ +#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ +#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ +#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ +#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ +#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9G45_BASE_UDPHS 0xfff78000 +#define AT91SAM9G45_BASE_TC0 0xfff7c000 +#define AT91SAM9G45_BASE_TC1 0xfff7c040 +#define AT91SAM9G45_BASE_TC2 0xfff7c080 +#define AT91SAM9G45_BASE_MCI0 0xfff80000 +#define AT91SAM9G45_BASE_TWI0 0xfff84000 +#define AT91SAM9G45_BASE_TWI1 0xfff88000 +#define AT91SAM9G45_BASE_US0 0xfff8c000 +#define AT91SAM9G45_BASE_US1 0xfff90000 +#define AT91SAM9G45_BASE_US2 0xfff94000 +#define AT91SAM9G45_BASE_US3 0xfff98000 +#define AT91SAM9G45_BASE_SSC0 0xfff9c000 +#define AT91SAM9G45_BASE_SSC1 0xfffa0000 +#define AT91SAM9G45_BASE_SPI0 0xfffa4000 +#define AT91SAM9G45_BASE_SPI1 0xfffa8000 +#define AT91SAM9G45_BASE_AC97C 0xfffac000 +#define AT91SAM9G45_BASE_TSC 0xfffb0000 +#define AT91SAM9G45_BASE_ISI 0xfffb4000 +#define AT91SAM9G45_BASE_PWMC 0xfffb8000 +#define AT91SAM9G45_BASE_EMAC 0xfffbc000 +#define AT91SAM9G45_BASE_AES 0xfffc0000 +#define AT91SAM9G45_BASE_TDES 0xfffc4000 +#define AT91SAM9G45_BASE_SHA 0xfffc8000 +#define AT91SAM9G45_BASE_TRNG 0xfffcc000 +#define AT91SAM9G45_BASE_MCI1 0xfffd0000 +#define AT91SAM9G45_BASE_TC3 0xfffd4000 +#define AT91SAM9G45_BASE_TC4 0xfffd4040 +#define AT91SAM9G45_BASE_TC5 0xfffd4080 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) +#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9G45_BASE_US0 +#define AT91_USART1 AT91SAM9G45_BASE_US1 +#define AT91_USART2 AT91SAM9G45_BASE_US2 +#define AT91_USART3 AT91SAM9G45_BASE_US3 + +/* + * Internal Memory. + */ +#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ +#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ + +#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ + +#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ +#define AT91SAM9G45_HCI_BASE 0x00700000 /* USB Host controller (OHCI) */ +#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ +#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +/* + * Cpu Name + */ +#define AT91_CPU_NAME "AT91SAM9G45" + +#endif diff --git a/include/asm-arm/arch-at91/at91sam9g45_matrix.h b/include/asm-arm/arch-at91/at91sam9g45_matrix.h new file mode 100644 index 0000000000..1620e1baff --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9g45_matrix.h @@ -0,0 +1,153 @@ +/* + * Matrix-centric header file for the AT91SAM9M1x family + * + * Copyright (C) 2008 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9G45 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9G45_MATRIX_H +#define AT91SAM9G45_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ +#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) +#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ +#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) +#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) + +#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ +#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ +#define AT91C_VDEC_SEL_OFF (0 << 0) +#define AT91C_VDEC_SEL_ON (1 << 0) + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ +#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) +#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) + +#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ +#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ +#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) +#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) +#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ + +#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ +#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ +#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) +#define AT91_MATRIX_WPSR_WPV (1 << 0) +#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ + +#endif diff --git a/include/asm-arm/arch-at91/clk.h b/include/asm-arm/arch-at91/clk.h index 6aaf82eae2..f642dd9958 100644 --- a/include/asm-arm/arch-at91/clk.h +++ b/include/asm-arm/arch-at91/clk.h @@ -49,6 +49,11 @@ static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id) return get_mck_clk_rate(); } +static inline unsigned long get_spi_clk_rate(unsigned int dev_id) +{ + return get_mck_clk_rate(); +} + static inline unsigned long get_twi_clk_rate(unsigned int dev_id) { return get_mck_clk_rate(); diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h index 870410645f..de06a1004b 100644 --- a/include/asm-arm/arch-at91/hardware.h +++ b/include/asm-arm/arch-at91/hardware.h @@ -23,7 +23,7 @@ #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 #define AT91_ID_UHP AT91SAM9260_ID_UHP #define AT91_PMC_UHP AT91SAM926x_PMC_UHP -#elif defined(CONFIG_AT91SAM9261) +#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) #include <asm/arch/at91sam9261.h> #define AT91_BASE_SPI AT91SAM9261_BASE_SPI0 #define AT91_ID_UHP AT91SAM9261_ID_UHP @@ -37,6 +37,12 @@ #include <asm/arch/at91sam9rl.h> #define AT91_BASE_SPI AT91SAM9RL_BASE_SPI #define AT91_ID_UHP AT91SAM9RL_ID_UHP +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#include <asm/arch/at91sam9g45.h> +#define AT91_BASE_EMAC AT91SAM9G45_BASE_EMAC +#define AT91_BASE_SPI AT91SAM9G45_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9G45_ID_UHPHS +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP #elif defined(CONFIG_AT91CAP9) #include <asm/arch/at91cap9.h> #define AT91_BASE_SPI AT91CAP9_BASE_SPI0 diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h index 8015dad6a9..f605f37fd2 100644 --- a/include/asm-arm/arch-at91/memory-map.h +++ b/include/asm-arm/arch-at91/memory-map.h @@ -30,5 +30,6 @@ #define USART1_BASE AT91_USART1 #define USART2_BASE AT91_USART2 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) +#define SPI0_BASE AT91_BASE_SPI #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h index 187d3c3437..386540e418 100644 --- a/include/asm-arm/arch-davinci/nand_defs.h +++ b/include/asm-arm/arch-davinci/nand_defs.h @@ -28,134 +28,18 @@ #include <asm/arch/hardware.h> +#ifdef CONFIG_SOC_DM646x +#define MASK_CLE 0x80000 +#define MASK_ALE 0x40000 +#else #define MASK_CLE 0x10 -#define MASK_ALE 0x0a - -#define NAND_CE0CLE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x10)) -#define NAND_CE0ALE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x0a)) -#define NAND_CE0DATA ((volatile u_int8_t *)CONFIG_SYS_NAND_BASE) - -typedef struct { - u_int32_t NRCSR; - u_int32_t AWCCR; - u_int8_t RSVD0[8]; - u_int32_t AB1CR; - u_int32_t AB2CR; - u_int32_t AB3CR; - u_int32_t AB4CR; - u_int8_t RSVD1[32]; - u_int32_t NIRR; - u_int32_t NIMR; - u_int32_t NIMSR; - u_int32_t NIMCR; - u_int8_t RSVD2[16]; - u_int32_t NANDFCR; - u_int32_t NANDFSR; - u_int8_t RSVD3[8]; - u_int32_t NANDF1ECC; - u_int32_t NANDF2ECC; - u_int32_t NANDF3ECC; - u_int32_t NANDF4ECC; - u_int8_t RSVD4[4]; - u_int32_t IODFTECR; - u_int32_t IODFTGCR; - u_int8_t RSVD5[4]; - u_int32_t IODFTMRLR; - u_int32_t IODFTMRMR; - u_int32_t IODFTMRMSBR; - u_int8_t RSVD6[20]; - u_int32_t MODRNR; - u_int8_t RSVD7[76]; - u_int32_t CE0DATA; - u_int32_t CE0ALE; - u_int32_t CE0CLE; - u_int8_t RSVD8[4]; - u_int32_t CE1DATA; - u_int32_t CE1ALE; - u_int32_t CE1CLE; - u_int8_t RSVD9[4]; - u_int32_t CE2DATA; - u_int32_t CE2ALE; - u_int32_t CE2CLE; - u_int8_t RSVD10[4]; - u_int32_t CE3DATA; - u_int32_t CE3ALE; - u_int32_t CE3CLE; -} nand_registers; - -typedef volatile nand_registers *nandregs; +#define MASK_ALE 0x08 +#endif #define NAND_READ_START 0x00 #define NAND_READ_END 0x30 #define NAND_STATUS 0x70 -#ifdef CONFIG_SYS_NAND_HW_ECC -#define NAND_Ecc_P1e (1 << 0) -#define NAND_Ecc_P2e (1 << 1) -#define NAND_Ecc_P4e (1 << 2) -#define NAND_Ecc_P8e (1 << 3) -#define NAND_Ecc_P16e (1 << 4) -#define NAND_Ecc_P32e (1 << 5) -#define NAND_Ecc_P64e (1 << 6) -#define NAND_Ecc_P128e (1 << 7) -#define NAND_Ecc_P256e (1 << 8) -#define NAND_Ecc_P512e (1 << 9) -#define NAND_Ecc_P1024e (1 << 10) -#define NAND_Ecc_P2048e (1 << 11) - -#define NAND_Ecc_P1o (1 << 16) -#define NAND_Ecc_P2o (1 << 17) -#define NAND_Ecc_P4o (1 << 18) -#define NAND_Ecc_P8o (1 << 19) -#define NAND_Ecc_P16o (1 << 20) -#define NAND_Ecc_P32o (1 << 21) -#define NAND_Ecc_P64o (1 << 22) -#define NAND_Ecc_P128o (1 << 23) -#define NAND_Ecc_P256o (1 << 24) -#define NAND_Ecc_P512o (1 << 25) -#define NAND_Ecc_P1024o (1 << 26) -#define NAND_Ecc_P2048o (1 << 27) - -#define TF(v) (v ? 1 : 0) - -#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0) -#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1) -#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2) -#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3) -#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4) -#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5) -#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6) -#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7) - -#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0) -#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1) -#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2) -#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3) -#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4) -#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5) -#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6) -#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7) - -#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0) -#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1) -#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2) -#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3) -#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4) -#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5) -#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6) -#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7) - -#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0) -#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1) -#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2) -#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3) -#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4) -#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5) -#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6) -#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7) - -#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) -#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) -#endif +extern void davinci_nand_init(struct nand_chip *nand); #endif diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h index 52dafc22cc..47679dd441 100644 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ b/include/asm-arm/arch-kirkwood/kirkwood.h @@ -45,7 +45,7 @@ #define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478)) #define KW_UART0_BASE (KW_REGISTER(0x12000)) -#define KW_UART1_BASE (KW_REGISTER(0x13000)) +#define KW_UART1_BASE (KW_REGISTER(0x12100)) #define KW_MPP_BASE (KW_REGISTER(0x10000)) #define KW_GPIO0_BASE (KW_REGISTER(0x10100)) #define KW_GPIO1_BASE (KW_REGISTER(0x10140)) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 5a0885aef2..2a723dceaa 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1952,12 +1952,13 @@ typedef void (*ExcpHndlr) (void) ; #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ -#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ -#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ -#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ -#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ -#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ +#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ +#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ +#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ +#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ +#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ +#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ +#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ #else /* if defined CONFIG_CPU_MONAHANS */ diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h index 3648a05f8c..24e6c6934e 100644 --- a/include/asm-ppc/immap_512x.h +++ b/include/asm-ppc/immap_512x.h @@ -185,10 +185,11 @@ typedef struct clk512x { u8 res0[4]; u32 bcr; /* Bread Crumb Register */ u32 pscccr[12]; /* PSC0-11 Clock Control Registers */ - u32 spccr; /* SPDIF Clock Control Registers */ - u32 cccr; /* CFM Clock Control Registers */ - u32 dccr; /* DIU Clock Control Registers */ - u8 res1[0xa8]; + u32 spccr; /* SPDIF Clock Control Register */ + u32 cccr; /* CFM Clock Control Register */ + u32 dccr; /* DIU Clock Control Register */ + u32 msccr[4]; /* MSCAN1-4 Clock Control Registers */ + u8 res1[0x98]; } clk512x_t; /* SPMR - System PLL Mode Register */ diff --git a/include/asm-ppc/mpc512x.h b/include/asm-ppc/mpc512x.h new file mode 100644 index 0000000000..20456f52f7 --- /dev/null +++ b/include/asm-ppc/mpc512x.h @@ -0,0 +1,57 @@ +/* + * include/asm-ppc/mpc512x.h + * + * Prototypes, etc. for the Freescale MPC512x embedded cpu chips + * + * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASMPPC_MPC512X_H +#define __ASMPPC_MPC512X_H + +/* + * macros for manipulating CSx_START/STOP + */ +#define CSAW_START(start) ((start) & 0xFFFF0000) +#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) + +/* + * Inlines + */ + +/* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync. + */ +static inline void sync_law(volatile void *addr) +{ + in_be32(addr); + __asm__ __volatile__ ("isync"); +} + +/* + * Prototypes + */ +extern long int fixed_sdram(void); +extern int mpc5121_diu_init(void); +extern void ide_set_reset(int idereset); + +#endif /* __ASMPPC_MPC512X_H */ diff --git a/include/asm-sh/clk.h b/include/asm-sh/clk.h new file mode 100644 index 0000000000..9cac6b09f9 --- /dev/null +++ b/include/asm-sh/clk.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_SH_CLK_H__ +#define __ASM_SH_CLK_H__ + +static inline unsigned long get_peripheral_clk_rate(void) +{ + return CONFIG_SYS_CLK_FREQ; +} + +static inline unsigned long get_tmu0_clk_rate(void) +{ + return CONFIG_SYS_CLK_FREQ; +} + +#endif /* __ASM_SH_CLK_H__ */ diff --git a/include/asm-sh/macro.h b/include/asm-sh/macro.h index 61f792a044..2b273c3ef4 100644 --- a/include/asm-sh/macro.h +++ b/include/asm-sh/macro.h @@ -29,7 +29,7 @@ .macro write16, addr, data mov.l \addr ,r1 - mov.l \data ,r0 + mov.w \data ,r0 mov.w r0, @r1 .endm diff --git a/include/common.h b/include/common.h index 6284b8aff8..a6c7c07692 100644 --- a/include/common.h +++ b/include/common.h @@ -275,7 +275,8 @@ void pci_init_board(void); void pciinfo (int, int); #if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000)) - int pci_pre_init (struct pci_controller * ); + int pci_pre_init (struct pci_controller *); + int is_pci_host (struct pci_controller *); #endif #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) @@ -285,7 +286,6 @@ void pciinfo (int, int); # if defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init (struct pci_controller *); # endif - int is_pci_host (struct pci_controller *); #if defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) @@ -688,7 +688,7 @@ int pcmcia_init (void); /* * Board-specific Platform code can reimplement show_boot_progress () if needed */ -void __attribute__((weak)) show_boot_progress (int val); +void show_boot_progress(int val); #ifdef CONFIG_INIT_CRITICAL #error CONFIG_INIT_CRITICAL is deprecated! diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index f6777b9bba..251fe6742b 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -103,9 +103,7 @@ #define PCI_ENET1_MEMADDR 0x81000000 #define CONFIG_RTL8139 -#define _IO_BASE 0x00000000 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) + /* Make sure the ethaddr can be overwritten TODO: Remove this on final product */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 50b3a03a01..5e86e4cb90 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -85,7 +85,6 @@ # define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ # define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ # define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -# define _IO_BASE 0 #endif #define CONFIG_NET_MULTI 1 diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index cf8b773c28..df6970cdfa 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -91,7 +91,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -#define _IO_BASE 0 #define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 101dcedeed..87f3a73ae4 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -180,7 +180,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -#define _IO_BASE 0 /* Realtime clock */ #define CONFIG_MCFRTC diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index f2e574b737..d4d3256f75 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -360,16 +360,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define _IO_BASE 0x00000000 /* points to PCI I/O space */ - #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 9e00b89862..7085d287db 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -427,12 +427,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #undef CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 59cfde6284..1d8fecf794 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -340,12 +340,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #undef CONFIG_TULIP #define CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 6f1b1a4c83..235be5143d 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -484,12 +484,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #undef CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 1091043c01..2f40ef48c9 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -280,10 +280,6 @@ #define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ -/* For RTL8139 */ -#define KSEG1ADDR(x) ({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); }) -#define _IO_BASE 0x00000000 - /* controller 1, Base address 0xa000 */ #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 035874b312..60ce0f3aca 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -348,10 +348,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | CONFIG_SYS_PHYS_ADDR_HIGH) #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */ -/* For RTL8139 */ -#define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) -#define _IO_BASE 0x00000000 - #ifdef CONFIG_PHYS_64BIT /* * Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT. diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 967520587a..ac8cb57d08 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -193,8 +193,6 @@ #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 -#define _IO_BASE 0x00000000 - #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 3 diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index c9589bd876..3853574fcb 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -141,7 +141,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __MIGO_R_H */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 93068600ad..676f0134fc 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -519,12 +519,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #undef CONFIG_TULIP #define CONFIG_RTL8139 -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index c6d77e3ae6..6f58a05692 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -170,7 +170,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __AP325RXA_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h index 58f67a4f0a..e7e238d8f3 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -123,26 +123,83 @@ * [09:05] DRAM tRP: * [04:00] DRAM tRPA */ -#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00 -#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00 -/*#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 */ - #define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189 -/*#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 */ - #define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863 +#define CONFIG_SYS_MDDRC_SYS_CFG ( (1 << 31) | /* RST_B */ \ + (1 << 30) | /* CKE */ \ + (1 << 29) | /* CLK_ON */ \ + (1 << 28) | /* CMD_MODE */ \ + (4 << 25) | /* DRAM_ROW_SELECT */ \ + (3 << 21) | /* DRAM_BANK_SELECT */ \ + (0 << 18) | /* SELF_REF_EN */ \ + (0 << 17) | /* 16BIT_MODE */ \ + (2 << 13) | /* RDLY */ \ + (0 << 12) | /* HALF_DQS_DLY */ \ + (1 << 11) | /* QUART_DQS_DLY */ \ + (2 << 8) | /* WDLY */ \ + (0 << 7) | /* EARLY_ODT */ \ + (1 << 6) | /* ON_DIE_TERMINATE */ \ + (0 << 5) | /* FIFO_OV_CLEAR */ \ + (0 << 4) | /* FIFO_UV_CLEAR */ \ + (0 << 1) | /* FIFO_OV_EN */ \ + (0 << 0) /* FIFO_UV_EN */ \ + ) + +#define CONFIG_SYS_MDDRC_SYS_CFG_RUN (CONFIG_SYS_MDDRC_SYS_CFG & ~(1 << 28)) +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863 #define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 #define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E -/*#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E */ #define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x030C3D2E #define CONFIG_SYS_MICRON_NOP 0x01380000 #define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EM2 0x01020000 -#define CONFIG_SYS_MICRON_EM3 0x01030000 -#define CONFIG_SYS_MICRON_EN_DLL 0x01010000 +#define CONFIG_SYS_MICRON_EMR ( (1 << 24) | /* CMD_REQ */ \ + (0 << 22) | /* DRAM_CS */ \ + (0 << 21) | /* DRAM_RAS */ \ + (0 << 20) | /* DRAM_CAS */ \ + (0 << 19) | /* DRAM_WEB */ \ + (1 << 16) | /* DRAM_BS[2:0] */ \ + (0 << 15) | /* */ \ + (0 << 12) | /* A12->out */ \ + (0 << 11) | /* A11->RDQS */ \ + (0 << 10) | /* A10->DQS# */ \ + (0 << 7) | /* OCD program */ \ + (0 << 6) | /* Rtt1 */ \ + (0 << 3) | /* posted CAS# */ \ + (0 << 2) | /* Rtt0 */ \ + (1 << 1) | /* ODS */ \ + (0 << 0) /* DLL */ \ + ) +#define CONFIG_SYS_MICRON_EMR2 0x01020000 +#define CONFIG_SYS_MICRON_EMR3 0x01030000 #define CONFIG_SYS_MICRON_RFSH 0x01080000 #define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_OCD_DEFAULT 0x01010780 +#define CONFIG_SYS_MICRON_EMR_OCD ( (1 << 24) | /* CMD_REQ */ \ + (0 << 22) | /* DRAM_CS */ \ + (0 << 21) | /* DRAM_RAS */ \ + (0 << 20) | /* DRAM_CAS */ \ + (0 << 19) | /* DRAM_WEB */ \ + (1 << 16) | /* DRAM_BS[2:0] */ \ + (0 << 15) | /* */ \ + (0 << 12) | /* A12->out */ \ + (0 << 11) | /* A11->RDQS */ \ + (1 << 10) | /* A10->DQS# */ \ + (7 << 7) | /* OCD program */ \ + (0 << 6) | /* Rtt1 */ \ + (0 << 3) | /* posted CAS# */ \ + (1 << 2) | /* Rtt0 */ \ + (0 << 1) | /* ODS (Output Drive Strength) */ \ + (0 << 0) /* DLL */ \ + ) + +/* + * Backward compatible definitions, + * so we do not have to change cpu/mpc512x/fixed_sdram.c + */ +#define CONFIG_SYS_MICRON_EM2 (CONFIG_SYS_MICRON_EMR2) +#define CONFIG_SYS_MICRON_EM3 (CONFIG_SYS_MICRON_EMR3) +#define CONFIG_SYS_MICRON_EN_DLL (CONFIG_SYS_MICRON_EMR) +#define CONFIG_SYS_MICRON_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) /* DDR Priority Manager Configuration */ #define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 @@ -184,11 +241,37 @@ #undef CONFIG_SYS_FLASH_CHECKSUM +/* + * NAND FLASH support + * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) + */ +#define CONFIG_CMD_NAND /* enable NAND support */ +#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ + + +#define CONFIG_NAND_MPC5121_NFC +#define CONFIG_SYS_NAND_BASE 0x40000000 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE + +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +/* + * Configuration parameters for MPC5121 NAND driver + */ +#define CONFIG_FSL_NFC_WIDTH 1 +#define CONFIG_FSL_NFC_WRITE_SIZE 2048 +#define CONFIG_FSL_NFC_SPARE_SIZE 64 +#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE + #define CONFIG_SYS_SRAM_BASE 0x30000000 #define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ -#define CONFIG_SYS_ARIA_SRAM_BASE 0x30020000 -#define CONFIG_SYS_ARIA_SRAM_SIZE 0x20000 /* 128 KB */ +/* Make two SRAM regions contiguous */ +#define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \ + CONFIG_SYS_SRAM_SIZE) +#define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */ #define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \ CONFIG_SYS_ARIA_SRAM_SIZE) @@ -226,7 +309,7 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) @@ -352,6 +435,7 @@ #undef CONFIG_CMD_FUSE #define CONFIG_CMD_I2C #undef CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_NFS #define CONFIG_CMD_PING @@ -361,13 +445,39 @@ #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION #endif /* defined(CONFIG_CMD_IDE) */ /* + * Dynamic MTD partition support + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=f8000000.flash,nand0=mpc5121.nand" + +/* + * NOR flash layout: + * + * F8000000 - FEAFFFFF 107 MiB User Data + * FEB00000 - FFAFFFFF 16 MiB Root File System + * FFB00000 - FFFEFFFF 4 MiB Linux Kernel + * FFF00000 - FFFBFFFF 768 KiB U-Boot (up to 512 KiB) and 2 x * env + * FFFC0000 - FFFFFFFF 256 KiB Device Tree + * + * NAND flash layout: one big partition + */ +#define MTDPARTS_DEFAULT "mtdparts=f8000000.flash:107m(user)," \ + "16m(rootfs)," \ + "4m(kernel)," \ + "768k(u-boot)," \ + "256k(dtb);" \ + "mpc5121.nand:-(data)" + +/* * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE * is set to 0xFFFF, watchdog timeouts after about 64s. For details @@ -460,9 +570,9 @@ "fdt_addr_r=880000\0" \ "ramdisk_addr_r=900000\0" \ "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFC40000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FC040000\0" \ + "kernel_addr=FFB00000\0" \ + "fdt_addr=FFFC0000\0" \ + "ramdisk_addr=FEB00000\0" \ "ramdiskfile=aria/uRamdisk\0" \ "u-boot=aria/u-boot.bin\0" \ "fdtfile=aria/aria.dtb\0" \ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 83e05b343f..6d240230db 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -32,8 +32,11 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#ifdef CONFIG_AT91SAM9G10EK +#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/ +#else #define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/ -#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */ +#endif #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -62,7 +65,11 @@ #define CONFIG_LCD_INFO_BELOW_LOGO 1 #define CONFIG_SYS_WHITE_ON_BLACK 1 #define CONFIG_ATMEL_LCD 1 +#ifdef CONFIG_AT91SAM9261EK #define CONFIG_ATMEL_LCD_BGR555 1 +#else +#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */ +#endif #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* LED */ @@ -147,7 +154,11 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ +#ifdef CONFIG_AT91SAM9G10EK +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10" +#else #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" +#endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 #define CONFIG_CMD_FAT 1 diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h new file mode 100644 index 0000000000..572c45bfb0 --- /dev/null +++ b/include/configs/at91sam9m10g45ek.h @@ -0,0 +1,225 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#ifdef CONFIG_AT91SAM9M10G45EK +#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/ +#else +#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ +#endif +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_LCD_LOGO 1 +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO 1 +#define CONFIG_LCD_INFO_BELOW_LOGO 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_RGB565 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* board specific(not enough SRAM) */ +#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000 + +/* LED */ +#define CONFIG_AT91_LED +#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ +#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x70000000 +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +/* DataFlash */ +#ifdef CONFIG_ATMEL_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH 1 +#define CONFIG_SPI_FLASH_ATMEL 1 +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#endif + +/* NOR flash, if populated */ +#ifndef CONFIG_CMD_NAND +#define CONFIG_SYS_NO_FLASH 1 +#else +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 +#endif + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_SYS_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 " \ + "mtdparts=at91_nand:-(root) "\ + "rw rootfstype=jffs2" + +#else /* CONFIG_SYS_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock5 " \ + "mtdparts=at91_nand:128k(bootstrap)ro, \ + 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \ + 2M(linux),-(root) " \ + "rw rootfstype=jffs2" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 0a86e83fbf..98300db7b5 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -151,36 +151,28 @@ /* * NAND Settings */ -/* #define CONFIG_BF537_NAND */ -#ifdef CONFIG_BF537_NAND -# define CONFIG_CMD_NAND -#endif - -#define CONFIG_SYS_NAND_ADDR 0x20212000 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR +/* #define CONFIG_NAND_PLAT */ +#define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define BFIN_NAND_READY PF3 - -#define NAND_WAIT_READY(nand) \ + +#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) +#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) +#define BFIN_NAND_READY PF3 +#define BFIN_NAND_WRITE(addr, cmd) \ do { \ - int timeout = 0; \ - while (!(*pPORTFIO & PF3)) \ - if (timeout++ > 100000) \ - break; \ + bfin_write8(addr, cmd); \ + SSYNC(); \ } while (0) -#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */ -#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */ -#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d) -#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d) -#define WRITE_NAND(d, adr) bfin_write8(adr, d) -#define READ_NAND(adr) bfin_read8(adr) +#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY) +#define NAND_PLAT_INIT() \ + do { \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \ + bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \ + } while (0) /* diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 4149a29471..1ca2e51420 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -38,6 +38,9 @@ # define CONFIG_CMD_USB_STORAGE # define CONFIG_DOS_PARTITION # endif +# ifdef CONFIG_NAND_PLAT +# define CONFIG_CMD_NAND +# endif # ifdef CONFIG_POST # define CONFIG_CMD_DIAG # endif diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 1e4c716139..887f3fb3a3 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -83,10 +83,9 @@ #endif #define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define ENV_IS_EMBEDDED_CUSTOM /* * SDRAM settings & memory map @@ -245,9 +244,9 @@ * Serial Flash Infomation */ #define CONFIG_BFIN_SPI -/* For the M25P64 SCK Should be Kept < 20Mhz */ -#define CONFIG_ENV_SPI_MAX_HZ 20000000 -#define CONFIG_SF_DEFAULT_SPEED 20000000 +/* For the M25P64 SCK Should be Kept < 15Mhz */ +#define CONFIG_ENV_SPI_MAX_HZ 15000000 +#define CONFIG_SF_DEFAULT_SPEED 15000000 #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index d814012c41..48c51988af 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -132,9 +132,11 @@ */ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ +#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */ #define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ #else #define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CONFIG_SYS_NOR_CS 3 /* NOR chip connected to CSx */ #define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ #define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 53a25807ae..1153f111d3 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -60,8 +60,13 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 +/* The next 2 lines are for use with DEV-BF5xx */ #define CONFIG_DRIVER_SMC91111 1 #define CONFIG_SMC91111_BASE 0x28000300 +/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */ +/* #define CONFIG_DRIVER_SMC911X 1 */ +/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */ +/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */ #define CONFIG_HOSTNAME cm-bf561 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ diff --git a/include/configs/espt.h b/include/configs/espt.h new file mode 100644 index 0000000000..2ec907c1f1 --- /dev/null +++ b/include/configs/espt.h @@ -0,0 +1,126 @@ +/* + * Configuation settings for the ESPT-GIGA board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ESPT_H +#define __ESPT_H + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7763 1 +#define CONFIG_ESPT 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SAVEENV + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF0 1 + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ +#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ +#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ +#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments + passed to kernel */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate + settings for this board */ + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE (0x8C000000) +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash(NOR) S29JL064H */ +#define CONFIG_SYS_FLASH_BASE (0xA0000000) +#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) +#define CONFIG_SYS_MAX_FLASH_BANKS (1) +#define CONFIG_SYS_MAX_FLASH_SECT (150) + +/* U-boot setting */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE (256) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#undef CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +/* Timeout for Flash erase operations (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CONFIG_SYS_FLASH_PROTECTION +#undef CONFIG_SYS_DIRECT_FLASH_TFTP +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) +/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) + +/* Clock */ +#define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 + +/* Ether */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_SH_ETHER 1 +#define CONFIG_SH_ETHER_USE_PORT (1) +#define CONFIG_SH_ETHER_PHY_ADDR (0x00) + +#endif /* __SH7763RDP_H */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index 083184316a..e00859a021 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -111,17 +111,10 @@ * [09:05] DRAM tRP: * [04:00] DRAM tRPA */ -#ifdef CONFIG_ADS5121_REV2 -#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00 -#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 -#else #define CONFIG_SYS_MDDRC_SYS_CFG 0xFA804A00 #define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xEA804A00 #define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 #define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 -#endif #define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 #define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E #define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E @@ -178,7 +171,7 @@ /* * NAND FLASH - * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only) + * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) */ #define CONFIG_CMD_NAND #define CONFIG_NAND_MPC5121_NFC @@ -187,6 +180,8 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 45a004eb2c..76f174db3f 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -201,9 +201,10 @@ /* * NAND FLASH - * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only) + * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) */ -#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND /* enable NAND support */ +#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ #define CONFIG_NAND_MPC5121_NFC #define CONFIG_SYS_NAND_BASE 0x40000000 @@ -211,6 +212,8 @@ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE #define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + /* * Configuration parameters for MPC5121 NAND driver */ @@ -365,23 +368,52 @@ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DATE + #undef CONFIG_CMD_FUSE -#define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif -#if defined(CONFIG_CMD_IDE) +/* + * Dynamic MTD partition support + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD +#define MTDIDS_DEFAULT "nor0=fc000000.flash,nand0=mpc5121.nand" + +/* + * NOR flash layout: + * + * FC000000 - FEABFFFF 42.75 MiB User Data + * FEAC0000 - FFABFFFF 16 MiB Root File System + * FFAC0000 - FFEBFFFF 4 MiB Linux Kernel + * FFEC0000 - FFEFFFFF 256 KiB Device Tree + * FFF00000 - FFFFFFFF 1 MiB U-Boot (up to 512 KiB) and 2 x * env + * + * NAND flash layout: one big partition + */ +#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:43776k(user)," \ + "16m(rootfs)," \ + "4m(kernel)," \ + "256k(dtb)," \ + "1m(u-boot);" \ + "mpc5121.nand:-(data)" + + +#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION @@ -474,9 +506,9 @@ "fdt_addr_r=880000\0" \ "ramdisk_addr_r=900000\0" \ "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFC40000\0" \ + "kernel_addr=FFAC0000\0" \ "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FC040000\0" \ + "ramdisk_addr=FEAC0000\0" \ "ramdiskfile=mpc5121ads/uRamdisk\0" \ "u-boot=mpc5121ads/u-boot.bin\0" \ "bootfile=mpc5121ads/uImage\0" \ diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 7d421556e9..4f98ba41a5 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -124,8 +124,6 @@ /* Networking Configuration */ -#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */ - #define CONFIG_TSI108_ETH #define CONFIG_TSI108_ETH_NUM_PORTS 2 @@ -303,8 +301,6 @@ #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */ -#define _IO_BASE 0x00000000 /* points to PCI I/O space */ - /* PCI Config Space mapping */ #define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 86f6a934f9..0a472a6581 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -82,8 +82,8 @@ /* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000 -#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* UART */ #define CONFIG_SCIF_CONSOLE 1 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 9a88ec7fa4..ba0a3f8043 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -101,8 +101,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* PCMCIA */ #define CONFIG_IDE_PCMCIA 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 53ffbeef24..6755af3d59 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -128,7 +128,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 #endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index 5eed3ab66d..8c06bf2736 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -101,7 +101,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #endif /* __MS7750SE_H */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h new file mode 100644 index 0000000000..8acf3c7469 --- /dev/null +++ b/include/configs/pcm030.h @@ -0,0 +1,444 @@ +/* + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2006 + * Eric Schumann, Phytec Messatechnik GmbH + * + * (C) Copyright 2009 + * Jon Smirl <jonsmirl@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny" + +/*----------------------------------------------------------------------------- +High Level Configuration Options +(easy to change) +-----------------------------------------------------------------------------*/ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ +#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ + /* FEC configuration and IDE */ +#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/*----------------------------------------------------------------------------- +Serial console configuration +-----------------------------------------------------------------------------*/ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */ + /*define gps port conf. */ + /* register later on to */ + /*enable UART function! */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI + +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + +#if (TEXT_BASE == 0xFF000000) /* Boot low */ +#define CONFIG_SYS_LOWBOOT 1 +#endif +/* RAMBOOT will be defined automatically in memory section */ + +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ + "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" + +/*----------------------------------------------------------------------------- +Autobooting +-----------------------------------------------------------------------------*/ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */ + /* even with bootdelay=0 */ +#undef CONFIG_BOOTARGS + + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\ + "mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uimage=uImage-pcm030\0" \ + "oftree=oftree-pcm030.dtb\0" \ + "jffs2=root-pcm030.jffs2\0" \ + "uboot=u-boot-pcm030.bin\0" \ + "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \ + " $(mtdparts) rw\0" \ + "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \ + " rootfstype=jffs2\0" \ + "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \ + " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \ + "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \ + " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \ + "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \ + "0xfff40000\0" \ + " cp.b 0x400000 0xff040000 $(filesize)\0" \ + "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \ + "cp.b 0x400000 0xff200000 $(filesize)\0" \ + "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \ + " cp.b 0x400000 0xfff40000 $(filesize)\0" \ + "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \ + " cp.b 0x400000 0xFFF00000 $(filesize)\0" \ + "unlock=yes\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run bcmd_flash" + +/*-------------------------------------------------------------------------- +IPB Bus clocking configuration. + ---------------------------------------------------------------------------*/ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ + +/*------------------------------------------------------------------------- + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + * -----------------------------------------------------------------------*/ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 +#define CONFIG_SYS_XLB_PIPELINING 1 + +/*--------------------------------------------------------------------------- + I2C configuration +---------------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/*--------------------------------------------------------------------------- + EEPROM CAT24WC32 configuration +---------------------------------------------------------------------------*/ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */ +#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_SIZE 2048 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 + +/*--------------------------------------------------------------------------- +RTC configuration +---------------------------------------------------------------------------*/ +#define RTC +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +/*--------------------------------------------------------------------------- + Flash configuration +---------------------------------------------------------------------------*/ + +#define CONFIG_SYS_FLASH_BASE 0xff000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ + /* (= chip selects) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* + * Use also hardware protection. This seems required, as the BDI uses + * hardware protection. Without this, U-Boot can't work with this sectors, + * as its protection is software only by default + */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + +/*--------------------------------------------------------------------------- + Environment settings +---------------------------------------------------------------------------*/ + +/* pcm030 ships with environment is EEPROM by default */ +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ + /*beginning of the EEPROM */ +#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE + +#define CONFIG_ENV_OVERWRITE 1 + +/*----------------------------------------------------------------------------- + Memory map +-----------------------------------------------------------------------------*/ +#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */ + /* bootloader or debugger config */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used */ + /* area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes */ + /* reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------------- + Ethernet configuration +-----------------------------------------------------------------------------*/ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x01 + +/*--------------------------------------------------------------------------- + GPIO configuration + ---------------------------------------------------------------------------*/ + +/* GPIO port configuration + * + * Pin mapping: + * + * [29:31] = 01x + * PSC1_0 -> AC97 SDATA out + * PSC1_1 -> AC97 SDTA in + * PSC1_2 -> AC97 SYNC out + * PSC1_3 -> AC97 bitclock out + * PSC1_4 -> AC97 reset out + * + * [25:27] = 001 + * PSC2_0 -> CAN 1 Tx out + * PSC2_1 -> CAN 1 Rx in + * PSC2_2 -> CAN 2 Tx out + * PSC2_3 -> CAN 2 Rx in + * PSC2_4 -> GPIO (claimed for ATA reset, active low) + * + * + * [20:23] = 1100 + * PSC3_0 -> UART Tx out + * PSC3_1 -> UART Rx in + * PSC3_2 -> UART RTS (in/out FIXME) + * PSC3_3 -> UART CTS (in/out FIXME) + * PSC3_4 -> LocalPlus Bus CS6 \ + * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5] + * PSC3_6 -> dedicated SPI MOSI out (master case) + * PSC3_7 -> dedicated SPI MISO in (master case) + * PSC3_8 -> dedicated SPI SS out (master case) + * PSC3_9 -> dedicated SPI CLK out (master case) + * + * [18:19] = 01 + * USB_0 -> USB OE out + * USB_1 -> USB Tx- out + * USB_2 -> USB Tx+ out + * USB_3 -> USB RxD (in/out FIXME) + * USB_4 -> USB Rx+ in + * USB_5 -> USB Rx- in + * USB_6 -> USB PortPower out + * USB_7 -> USB speed out + * USB_8 -> USB suspend (in/out FIXME) + * USB_9 -> USB overcurrent in + * + * [17] = 0 + * USB differential mode + * + * [16] = 0 + * PCI enabled + * + * [12:15] = 0101 + * ETH_0 -> ETH Txen + * ETH_1 -> ETH TxD0 + * ETH_2 -> ETH TxD1 + * ETH_3 -> ETH TxD2 + * ETH_4 -> ETH TxD3 + * ETH_5 -> ETH Txerr + * ETH_6 -> ETH MDC + * ETH_7 -> ETH MDIO + * ETH_8 -> ETH RxDv + * ETH_9 -> ETH RxCLK + * ETH_10 -> ETH Collision + * ETH_11 -> ETH TxD + * ETH_12 -> ETH RxD0 + * ETH_13 -> ETH RxD1 + * ETH_14 -> ETH RxD2 + * ETH_15 -> ETH RxD3 + * ETH_16 -> ETH Rxerr + * ETH_17 -> ETH CRS + * + * [9:11] = 101 + * PSC6_0 -> UART RxD in + * PSC6_1 -> UART CTS (in/out FIXME) + * PSC6_2 -> UART TxD out + * PSC6_3 -> UART RTS (in/out FIXME) + * + * [2:3/6:7] = 00/11 + * TMR_0 -> ATA_CS0 out + * TMR_1 -> ATA_CS1 out + * TMR_2 -> GPIO + * TMR_3 -> GPIO + * TMR_4 -> GPIO + * TMR_5 -> GPIO + * TMR_6 -> GPIO + * TMR_7 -> GPIO + * I2C_0 -> I2C 1 Clock out + * I2C_1 -> I2C 1 IO in/out + * I2C_2 -> I2C 2 Clock out + * I2C_3 -> I2C 2 IO in/out + * + * [4] = 1 + * PSC3_5 is used as CS7 + * + * [5] = 1 + * PSC3_4 is used as CS6 + * + * [1] = 0 + * gpio_wkup_7 is GPIO + * + * [0] = 0 + * gpio_wkup_6 is GPIO + * + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12 + +/*----------------------------------------------------------------------------- + Miscellaneous configurable options +-------------------------------------------------------------------------------*/ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_DISPLAY_BOARDINFO 1 + +/*----------------------------------------------------------------------------- + Various low-level settings +-----------------------------------------------------------------------------*/ +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE + +/* no burst access on the LPB */ +#define CONFIG_SYS_CS_BURST 0x00000000 +/* one deadcycle for the 33MHz statemachine */ +#define CONFIG_SYS_CS_DEADCYCLE 0x33333331 +/* one additional waitstate for the 33MHz statemachine */ +#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00 +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*--------------------------------------------------------------------------- + IDE/ATA stuff Supports IDE harddisk +----------------------------------------------------------------------------*/ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#define CONFIG_SYS_ATA_CS_ON_TIMER01 +#define CONFIG_IDE_RESET 1 /* reset for ide supported */ +#define CONFIG_IDE_PREINIT +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 +#define CONFIG_ATAPI 1 + +/* we enable IDE and FAT support, so we also need partition support */ +#define CONFIG_DOS_PARTITION 1 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN +#define OF_SOC "soc5200@f0000000" +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400" + +#endif /* __CONFIG_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 6fa1eafde7..8931b974aa 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -80,8 +80,8 @@ * SuperH Clock setting */ #define CONFIG_SYS_CLK_FREQ 60000000 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* @@ -123,7 +123,5 @@ */ #define CONFIG_NET_MULTI #define CONFIG_RTL8139 -#define _IO_BASE 0x00000000 -#define KSEG1ADDR(x) (x) #endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 88eb56821f..7738a17b01 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -121,8 +121,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 /* PCI Controller */ #if defined(CONFIG_CMD_PCI) @@ -144,6 +144,9 @@ #define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE +#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE #endif /* CONFIG_CMD_PCI */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 8d7456eb69..c8c62ad76e 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -114,8 +114,8 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 -#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CONFIG_SYS_HZ 1000 /* Ether */ #define CONFIG_NET_MULTI 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 21c3f70f5c..2c18e2f7fd 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -186,7 +186,7 @@ /* Board Clock */ /* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000 -#define TMU_CLK_DIVIDER 4 -#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_TMU_CLK_DIV 4 +#define CONFIG_SYS_HZ 1000 #endif /* __SH7785LCR_H */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index cac58cf325..018f576ef2 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -209,6 +209,9 @@ /* total memory available to uboot */ #define CONFIG_SYS_UBOOT_SIZE (1024 * 1024) +/* Put environment copies after the end of U-Boot owned RAM */ +#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE) + #ifdef CONFIG_ENABLE_MMU #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 #define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 300271f9d6..a9b70cc367 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -39,6 +39,10 @@ #define CONFIG_VERSATILE 1 /* in Versatile Platform Board */ #define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */ +#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */ +#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ +#endif + #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 #define CONFIG_SYS_HZ (1000000 / 256) @@ -101,7 +105,6 @@ /* * Command line configuration. */ - #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_FLASH @@ -132,8 +135,13 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Versatile # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Monitor Command Prompt */ +#ifdef CONFIG_ARCH_VERSATILE_AB +# define CONFIG_SYS_PROMPT "VersatileAB # " +#else +# define CONFIG_SYS_PROMPT "VersatilePB # " +#endif /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -159,13 +167,20 @@ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ - -#define CONFIG_SYS_FLASH_BASE 0x34000000 +#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ /*----------------------------------------------------------------------- * FLASH and environment organization */ - +/* + * Use the CFI flash driver for ease of use + */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_ENV_IS_IN_FLASH 1 +/* + * System control register + */ #define VERSATILE_SYS_BASE 0x10000000 #define VERSATILE_SYS_FLASH_OFFSET 0x4C #define VERSATILE_FLASHCTRL \ @@ -173,19 +188,47 @@ /* Enable writing to flash */ #define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define PHYS_FLASH_SIZE 0x34000000 /* 64MB */ /* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Erase Timeout */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20 * CONFIG_SYS_HZ) /* Write Timeout */ -#define CONFIG_SYS_MAX_FLASH_SECT (256) +#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ + +/* + * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block + * i.e. + * the bottom "sector" (bottom boot), or top "sector" + * (top boot), is a seperate erase region divided into + * 4 (equal) smaller sectors. This, notionally, allows + * quicker erase/rewrire of the most frequently changed + * area...... + * CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4 + */ + +#ifdef CONFIG_ARCH_VERSATILE_AB +#define FLASH_SECTOR_SIZE 0x00020000 /* 128 KB sectors */ +#define CONFIG_ENV_SECT_SIZE (2 * FLASH_SECTOR_SIZE) +#define CONFIG_SYS_MAX_FLASH_SECT (520) +#endif + +#ifdef CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */ +#define FLASH_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ +#define CONFIG_ENV_SECT_SIZE FLASH_SECTOR_SIZE +#define CONFIG_SYS_MAX_FLASH_SECT (260) +#endif + +#define CONFIG_SYS_FLASH_BASE 0x34000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_MONITOR_LEN (4 * CONFIG_ENV_SECT_SIZE) + +/* The ARM Boot Monitor is shipped in the lowest sector of flash */ -#define PHYS_FLASH_1 (CONFIG_SYS_FLASH_BASE) +#define FLASH_TOP (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE) +#define CONFIG_ENV_SIZE 8192 +#define CONFIG_ENV_ADDR (FLASH_TOP - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_IS_IN_FLASH 1 /* env in flash */ -#define CONFIG_ENV_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment */ -#define CONFIG_ENV_OFFSET 0x01f00000 /* environment starts */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/nand.h b/include/nand.h index 065a42c3ee..23f3ca1db8 100644 --- a/include/nand.h +++ b/include/nand.h @@ -38,22 +38,22 @@ typedef struct mtd_info nand_info_t; extern int nand_curr_device; extern nand_info_t nand_info[]; -static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf) +static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { return info->read(info, ofs, *len, (size_t *)len, buf); } -static inline int nand_write(nand_info_t *info, off_t ofs, size_t *len, u_char *buf) +static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf) { return info->write(info, ofs, *len, (size_t *)len, buf); } -static inline int nand_block_isbad(nand_info_t *info, off_t ofs) +static inline int nand_block_isbad(nand_info_t *info, loff_t ofs) { return info->block_isbad(info, ofs); } -static inline int nand_erase(nand_info_t *info, off_t off, size_t size) +static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) { struct erase_info instr; @@ -110,9 +110,9 @@ struct nand_erase_options { typedef struct nand_erase_options nand_erase_options_t; -int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length, +int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, u_char *buffer); -int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length, +int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, u_char *buffer); int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); @@ -122,7 +122,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); int nand_lock( nand_info_t *meminfo, int tight ); int nand_unlock( nand_info_t *meminfo, ulong start, ulong length ); -int nand_get_lock_status(nand_info_t *meminfo, ulong offset); +int nand_get_lock_status(nand_info_t *meminfo, loff_t offset); #ifdef CONFIG_SYS_NAND_SELECT_DEVICE void board_nand_select_device(struct nand_chip *nand, int chip); diff --git a/include/pci_ids.h b/include/pci_ids.h index ae642b1c4a..400c540cb2 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1519,6 +1519,8 @@ #define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 #define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 +#define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_VENDOR_ID_CBOARDS 0x1307 #define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001 diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 114056177c..3b99456227 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -85,7 +85,7 @@ #define MPC83XX_SCCR_USB_DRCM_01 0x00100000 #define MPC83XX_SCCR_USB_DRCM_10 0x00200000 -#if defined(CONFIG_MPC83XX) +#if defined(CONFIG_MPC83xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR |
