diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/kb9202.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h deleted file mode 100644 index cfb7ceacc1..0000000000 --- a/include/configs/kb9202.h +++ /dev/null @@ -1,196 +0,0 @@ -/* - * Rick Bronson <rick@efn.org> - * - * Configuation settings for the AT91RM9200DK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */ -#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -/* Only define one of the following, based on board type */ -/* #define CONFIG_KB9200 1 KwikByte KB9202 board */ -/* #define CONFIG_KB9201 1 KwikByte KB9202 board */ -#define CONFIG_KB9202 1 /* KwikByte KB9202 board */ - -#define CONFIG_KB920x 1 /* Any KB920x board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_SYS_LONGHELP - -#ifndef roundup -#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) -#endif -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_OVERWRITE 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_I2C -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC - - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024) - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 - -#define CONFIG_SYS_FLASH_BASE 0x10000000 - -#ifdef CONFIG_KB9202 -#define PHYS_FLASH_SIZE 0x1000000 -#else -#define PHYS_FLASH_SIZE 0x200000 -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_HARD_I2C - -#define CONFIG_ENV_IS_IN_EEPROM - -#ifdef CONFIG_KB9202 -#define CONFIG_ENV_OFFSET 0x3E00 -#define CONFIG_ENV_SIZE 0x0200 -#else -#define CONFIG_ENV_OFFSET 0x1000 -#define CONFIG_ENV_SIZE 0x1000 -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } - -#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI - -#ifndef __ASSEMBLY__ -/*----------------------------------------------------------------------- - * Board specific extension for bd_info - * - * This structure is embedded in the global bd_info (bd_t) structure - * and can be used by the board specific code (eg board/...) - */ - -struct bd_info_ext { - /* helper variable for board environment handling - * - * env_crc_valid == 0 => uninitialised - * env_crc_valid > 0 => environment crc in flash is valid - * env_crc_valid < 0 => environment crc in flash is invalid - */ - int env_crc_valid; -}; -#endif - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#endif |
