diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/usb.h | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/include/usb.h b/include/usb.h index 9625148b51..6db2140dd5 100644 --- a/include/usb.h +++ b/include/usb.h @@ -412,6 +412,113 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); ((usb_pipeendpoint(pipe) * 2) - \ (usb_pipein(pipe) ? 0 : 1)) +/** + * struct usb_device_id - identifies USB devices for probing and hotplugging + * @match_flags: Bit mask controlling which of the other fields are used to + * match against new devices. Any field except for driver_info may be + * used, although some only make sense in conjunction with other fields. + * This is usually set by a USB_DEVICE_*() macro, which sets all + * other fields in this structure except for driver_info. + * @idVendor: USB vendor ID for a device; numbers are assigned + * by the USB forum to its members. + * @idProduct: Vendor-assigned product ID. + * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers. + * This is also used to identify individual product versions, for + * a range consisting of a single device. + * @bcdDevice_hi: High end of version number range. The range of product + * versions is inclusive. + * @bDeviceClass: Class of device; numbers are assigned + * by the USB forum. Products may choose to implement classes, + * or be vendor-specific. Device classes specify behavior of all + * the interfaces on a device. + * @bDeviceSubClass: Subclass of device; associated with bDeviceClass. + * @bDeviceProtocol: Protocol of device; associated with bDeviceClass. + * @bInterfaceClass: Class of interface; numbers are assigned + * by the USB forum. Products may choose to implement classes, + * or be vendor-specific. Interface classes specify behavior only + * of a given interface; other interfaces may support other classes. + * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. + * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. + * @bInterfaceNumber: Number of interface; composite devices may use + * fixed interface numbers to differentiate between vendor-specific + * interfaces. + * @driver_info: Holds information used by the driver. Usually it holds + * a pointer to a descriptor understood by the driver, or perhaps + * device flags. + * + * In most cases, drivers will create a table of device IDs by using + * USB_DEVICE(), or similar macros designed for that purpose. + * They will then export it to userspace using MODULE_DEVICE_TABLE(), + * and provide it to the USB core through their usb_driver structure. + * + * See the usb_match_id() function for information about how matches are + * performed. Briefly, you will normally use one of several macros to help + * construct these entries. Each entry you provide will either identify + * one or more specific products, or will identify a class of products + * which have agreed to behave the same. You should put the more specific + * matches towards the beginning of your table, so that driver_info can + * record quirks of specific products. + */ +struct usb_device_id { + /* which fields to match against? */ + u16 match_flags; + + /* Used for product specific matches; range is inclusive */ + u16 idVendor; + u16 idProduct; + u16 bcdDevice_lo; + u16 bcdDevice_hi; + + /* Used for device class matches */ + u8 bDeviceClass; + u8 bDeviceSubClass; + u8 bDeviceProtocol; + + /* Used for interface class matches */ + u8 bInterfaceClass; + u8 bInterfaceSubClass; + u8 bInterfaceProtocol; + + /* Used for vendor-specific interface matches */ + u8 bInterfaceNumber; + + /* not matched against */ + ulong driver_info; +}; + +/* Some useful macros to use to create struct usb_device_id */ +#define USB_DEVICE_ID_MATCH_VENDOR 0x0001 +#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 +#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 +#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 +#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 +#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 +#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 +#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 +#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 +#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 +#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 + +/* Match anything, indicates this is a valid entry even if everything is 0 */ +#define USB_DEVICE_ID_MATCH_NONE 0x0800 +#define USB_DEVICE_ID_MATCH_ALL 0x07ff + +/** + * struct usb_driver_entry - Matches a driver to its usb_device_ids + * @compatible: Compatible string + * @data: Data for this compatible string + */ +struct usb_driver_entry { + struct driver *driver; + const struct usb_device_id *match; +}; + +#define USB_DEVICE(__name, __match) \ + ll_entry_declare(struct usb_driver_entry, __name, usb_driver_entry) = {\ + .driver = llsym(struct driver, __name, driver), \ + .match = __match, \ + } + /************************************************************************* * Hub Stuff */ |
