diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/socfpga_sr1500.h | 115 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp.h | 8 | ||||
| -rw-r--r-- | include/configs/xilinx_zynqmp_ep.h | 2 |
3 files changed, 125 insertions, 0 deletions
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h new file mode 100644 index 0000000000..bccb235a11 --- /dev/null +++ b/include/configs/socfpga_sr1500.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2015 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __CONFIG_SOCFPGA_SR1500_H__ +#define __CONFIG_SOCFPGA_SR1500_H__ + +#include <asm/arch/base_addr_ac5.h> + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE + +#define CONFIG_HW_WATCHDOG + +/* U-Boot Commands */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MEMTEST +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TIME + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS0" __stringify(CONFIG_BAUDRATE) +#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot" +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ + +/* Ethernet on SoC (EMAC) */ +#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII +/* The PHY is autodetected, so no MII PHY address is needed here */ +#define CONFIG_PHY_MARVELL +#define PHY_ANEG_TIMEOUT 8000 + +/* Extra Environment */ +#define CONFIG_HOSTNAME sr1500 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "bootimage=zImage\0" \ + "fdt_addr=100\0" \ + "fdtimage=socfpga.dtb\0" \ + "fsloadcmd=ext2load\0" \ + "bootm ${loadaddr} - ${fdt_addr}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${mmcroot} rw rootwait;" \ + "bootz ${loadaddr} - ${fdt_addr}\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:1 ${loadaddr} ${bootimage};" \ + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ + "qspiroot=/dev/mtdblock0\0" \ + "qspirootfstype=jffs2\0" \ + "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${qspiroot} rw rootfstype=${qspirootfstype};"\ + "bootm ${loadaddr} - ${fdt_addr}\0" + +/* Environment */ +#define CONFIG_ENV_IS_IN_SPI_FLASH + +/* Enable SPI NOR flash reset, needed for SPI booting */ +#define CONFIG_SPI_N25Q256A_RESET + +/* + * Bootcounter + */ +#define CONFIG_BOOTCOUNT_LIMIT +/* last 2 lwords in OCRAM */ +#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 +#define CONFIG_SYS_BOOTCOUNT_BE + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +/* U-Boot payload is stored at offset 0x60000 */ +#undef CONFIG_SYS_SPI_U_BOOT_OFFS +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x60000 + +/* Environment setting for SPI flash */ +#undef CONFIG_ENV_SIZE +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_OFFSET 0x00040000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +#endif /* __CONFIG_SOCFPGA_SR1500_H__ */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 1546e8b6f9..50ac5f531c 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -107,6 +107,14 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 #if defined(CONFIG_ZYNQMP_USB) +#define CONFIG_USB_XHCI_DWC3 +#define CONFIG_USB_XHCI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_XHCI_ZYNQMP + #define CONFIG_USB_DWC3 #define CONFIG_USB_DWC3_GADGET diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index e9b904bcdc..ec39211af3 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -21,6 +21,8 @@ #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_ZYNQ_EEPROM #define CONFIG_AHCI +#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ + ZYNQMP_USB1_XHCI_BASEADDR} #include <configs/xilinx_zynqmp.h> |
