diff options
Diffstat (limited to 'include/configs')
503 files changed, 1711 insertions, 1436 deletions
diff --git a/include/configs/A3000.h b/include/configs/A3000.h index 90a21768e9..8f3a672cd5 100644 --- a/include/configs/A3000.h +++ b/include/configs/A3000.h @@ -168,7 +168,6 @@ */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 7373c61082..afc9ae885f 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -142,7 +142,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #if defined(CONFIG_CMD_KGDB) @@ -177,8 +176,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* Only interrupt boot if space is pressed */ diff --git a/include/configs/AR405.h b/include/configs/AR405.h index b0206f5d79..a4bd4b1d6a 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -91,7 +91,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -128,8 +127,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index a93d0c1037..9460be3b59 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -86,7 +86,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -123,8 +122,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 302d93fbe2..140f4439c1 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -72,7 +72,6 @@ /*----------------------------------------------------------------------- * Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ @@ -82,8 +81,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 2f0bc6b062..268f66ec0e 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -16,6 +16,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg #endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE @@ -716,7 +718,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -725,7 +726,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data @@ -841,8 +841,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h index fd9728ebdc..377db7be9a 100644 --- a/include/configs/BC3450.h +++ b/include/configs/BC3450.h @@ -427,7 +427,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -445,8 +444,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 948394eddd..036f264c97 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -181,18 +181,18 @@ extern unsigned long get_sdram_size(void); | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ /* NAND Flash Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x08) \ - | FTIM0_NAND_TWP(0x06) \ - | FTIM0_NAND_TWCHT(0x03) \ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ + | FTIM0_NAND_TWP(0x05) \ + | FTIM0_NAND_TWCHT(0x02) \ | FTIM0_NAND_TWH(0x04)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x18) \ - | FTIM1_NAND_TWBE(0x23) \ - | FTIM1_NAND_TRR(0x08) \ +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \ + | FTIM1_NAND_TWBE(0x1E) \ + | FTIM1_NAND_TRR(0x07) \ | FTIM1_NAND_TRP(0x05)) #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ | FTIM2_NAND_TREH(0x04) \ - | FTIM2_NAND_TWHRE(0x3f)) -#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x22) + | FTIM2_NAND_TWHRE(0x11)) +#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -361,7 +361,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -372,7 +371,6 @@ extern unsigned long get_sdram_size(void); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 03f3a4f803..75889b3574 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -603,7 +603,6 @@ combinations. this should be removed later #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -614,7 +613,6 @@ combinations. this should be removed later /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq:1ms ticks */ /* diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 83779eff86..08156c531d 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -154,14 +154,16 @@ CSPR_V) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) + #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ FTIM0_NOR_TEADC(0x5) | \ FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) | \ - FTIM1_NOR_TRAD_NOR(0x0f) | \ - FTIM1_NOR_TSEQRAD_NOR(0x0f)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ FTIM2_NOR_TWP(0x1c)) #define CONFIG_SYS_NOR_FTIM3 0x0 @@ -394,14 +396,12 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ /* * For booting Linux, the board info and command line data @@ -431,6 +431,8 @@ #define CONFIG_BAUDRATE 115200 +#define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on + #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ "netdev=eth0\0" \ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 47aec5f06c..ba5dba55aa 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -154,7 +154,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -185,8 +184,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index bd5d4e904b..4a5fc864a6 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -84,7 +84,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -121,8 +120,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index a01592168d..764ca2215f 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -74,7 +74,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #if 1 @@ -180,7 +179,6 @@ */ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index f522d45090..85720a503c 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -72,7 +72,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -111,8 +110,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index ca716a2a7d..793ee752d6 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -87,7 +87,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -124,8 +123,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index e11e85fc1b..53cf498dbe 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -94,7 +94,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -133,8 +132,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index 44e691eaf2..ce310323f6 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -95,7 +95,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -132,8 +131,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 746b076912..f09fcb0d4b 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -95,7 +95,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -134,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 0d561c7e85..304a12bea9 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -174,7 +174,6 @@ #define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -219,7 +218,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index dc4df29455..ae36411dd2 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -80,7 +80,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -111,8 +110,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index a85a418fb1..a033a3a1e5 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -171,7 +171,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -186,8 +185,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ /* diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index d975f0daad..06876746a7 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -185,7 +185,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -200,8 +199,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ #define CONFIG_LOOPW diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 781a3b4d1d..a4ce6c389f 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -70,7 +70,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_IDENT_STRING "Cray L1" #define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HUSH_PARSER 1 #define CONFIG_SOURCE 1 @@ -130,7 +129,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ diff --git a/include/configs/CU824.h b/include/configs/CU824.h index f6f05a45ac..686402762f 100644 --- a/include/configs/CU824.h +++ b/include/configs/CU824.h @@ -68,7 +68,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #if 1 @@ -144,7 +143,6 @@ */ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. */ diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h index bd230eceb0..b77c8b2894 100644 --- a/include/configs/DB64360.h +++ b/include/configs/DB64360.h @@ -255,7 +255,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -300,7 +299,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h index 9f24eafd95..abc443499c 100644 --- a/include/configs/DB64460.h +++ b/include/configs/DB64460.h @@ -193,7 +193,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" /* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -238,7 +237,6 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" #define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 8155caa5ed..74e79e23e6 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -61,7 +61,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -98,8 +97,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index b7764d4bc2..433077d5af 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -84,7 +84,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -115,8 +114,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 5ffa6e4b44..2d7fc59ea2 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -310,7 +310,6 @@ int du440_phy_addr(int devnum); * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -327,8 +326,6 @@ int du440_phy_addr(int devnum); #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index fb2f3befd6..0ffbd41b49 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -75,7 +75,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ /* * choose between COM1 and COM2 as serial console @@ -96,8 +95,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index 69f44b1e62..a9d62c880f 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -120,8 +120,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Environment Variables and Storages */ diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h deleted file mode 100644 index 6678fc21c7..0000000000 --- a/include/configs/EP88x.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright (C) 2005 Arabella Software Ltd. - * Yuli Barcohen <yuli@arabellasw.com> - * - * Support for Embedded Planet EP88x boards. - * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC885 - -#define CONFIG_EP88X /* Embedded Planet EP88x board */ - -#define CONFIG_SYS_TEXT_BASE 0xFC000000 - -#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ - -/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_ETHER_ON_FEC1 /* Enable Ethernet on FEC1 */ -#define CONFIG_ETHER_ON_FEC2 /* Enable Ethernet on FEC2 */ -#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_MII_INIT 1 -#define FEC_ENET -#endif /* CONFIG_FEC_ENET */ - -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ -#define CONFIG_8xx_CPUCLK_DEFAULT 100000000 -#define CONFIG_SYS_8xx_CPUCLK_MIN 40000000 -#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:2M(ROM)ro,-(root)" - -#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ -#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_LONGHELP /* #undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* Default load address */ - -#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - -/*----------------------------------------------------------------------- - * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* Up to 128 Mbyte */ - -#define CONFIG_SYS_MAMR 0x00805000 - -/* - * 4096 Up to 4096 SDRAM rows - * 1000 factor s -> ms - * 32 PTP (pre-divider from MPTPR) - * 4 Number of refresh cycles per period - * 64 Refresh cycle in ms per number of rows - */ -#define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ - -#define CONFIG_SYS_RESET_ADDRESS 0x09900000 - -/*----------------------------------------------------------------------- - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -/*----------------------------------------------------------------------- - * Flash organisation - */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* Max num of sects on one chip */ - -/* Environment is in flash */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_SYS_OR0_PRELIM 0xFC000160 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V) - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -/*----------------------------------------------------------------------- - * BCSR - */ -#define CONFIG_SYS_OR3_PRELIM 0xFF0005B0 -#define CONFIG_SYS_BR3_PRELIM (0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V) - -#define CONFIG_SYS_BCSR 0xFA400000 - -/*----------------------------------------------------------------------- - * Internal Memory Map Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Configuration registers - */ -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ - SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ - SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ - SYPCR_SWF | SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) - -/* TBSCR - Time Base Status and Control Register */ -#define CONFIG_SYS_TBSCR (TBSCR_TBF | TBSCR_TBE) - -/* PISCR - Periodic Interrupt Status and Control */ -#define CONFIG_SYS_PISCR PISCR_PS - -/* SCCR - System Clock and reset Control Register */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR SCCR_RTSEL - -#define CONFIG_SYS_DER 0 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx chips */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ESTEEM192E.h b/include/configs/ESTEEM192E.h index 7d2fb47d80..347f8b64a2 100644 --- a/include/configs/ESTEEM192E.h +++ b/include/configs/ESTEEM192E.h @@ -84,8 +84,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h index fc8b921efc..8ec75d9618 100644 --- a/include/configs/EVB64260.h +++ b/include/configs/EVB64260.h @@ -110,7 +110,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -124,8 +123,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 100000000 /* 100 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h index c9cc0d075e..f366308f45 100644 --- a/include/configs/EXBITGEN.h +++ b/include/configs/EXBITGEN.h @@ -89,7 +89,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -116,8 +115,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h index 35c0c7eed1..50de4ea084 100644 --- a/include/configs/FADS823.h +++ b/include/configs/FADS823.h @@ -152,8 +152,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h index 559a83f527..d48460b9f5 100644 --- a/include/configs/FADS850SAR.h +++ b/include/configs/FADS850SAR.h @@ -98,8 +98,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 1c385f1097..d93223fa40 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -94,8 +94,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x40040000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h index 002a80413e..4ea24a631c 100644 --- a/include/configs/FPS850L.h +++ b/include/configs/FPS850L.h @@ -111,7 +111,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -130,8 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h index 5eaf2f862f..c3688616af 100644 --- a/include/configs/FPS860L.h +++ b/include/configs/FPS860L.h @@ -111,7 +111,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -130,8 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 818e82d4f4..5c537ced94 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -111,7 +111,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -150,8 +149,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 06c0e50c96..2822a08c0a 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -310,11 +310,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x01000000 /* - * Set decrementer frequency (1 ms ticks) - */ -#define CONFIG_SYS_HZ 1000 - -/* * Device memory map (after SDRAM remap to 0x0): * * CS Device Base Addr Size diff --git a/include/configs/GENIETV.h b/include/configs/GENIETV.h index c5ca279d7d..6a34b12bc6 100644 --- a/include/configs/GENIETV.h +++ b/include/configs/GENIETV.h @@ -142,8 +142,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } /* diff --git a/include/configs/HH405.h b/include/configs/HH405.h index a55c874cab..26b3bdf4d0 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -136,7 +136,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -175,8 +174,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/HIDDEN_DRAGON.h b/include/configs/HIDDEN_DRAGON.h index 79ab64c182..62a7f93fc7 100644 --- a/include/configs/HIDDEN_DRAGON.h +++ b/include/configs/HIDDEN_DRAGON.h @@ -64,13 +64,11 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 1906457f9f..5e1665374c 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -80,7 +80,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -117,8 +116,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index 5aaa9767e9..f3f2136668 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -53,8 +53,6 @@ /* Enable IRQs and watchdog with a 1000Hz system decrementer */ #define CONFIG_CMD_IRQ -#define CONFIG_SYS_HZ 1000 - /* -------------------------------------------------------------------- */ diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 40d0d7cab9..16af4bbcad 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -138,7 +138,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -153,8 +152,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 590abc30df..7aaa7768fd 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -181,7 +181,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -196,8 +195,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/IP860.h b/include/configs/IP860.h index c852ca998b..97eda58442 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -99,7 +99,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -116,8 +115,6 @@ #define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index 1f5dfa84f5..a543855a56 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -136,7 +136,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -154,8 +153,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x04400000 #define CONFIG_MISC_INIT_R 1 /* We need misc_init_r() */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index ca126ef346..a5cea8bc3c 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -128,7 +128,6 @@ /*----------------------------------------------------------------------- * Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ @@ -141,8 +140,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x09900000 #define CONFIG_MISC_INIT_R /* We need misc_init_r() */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index 53b51f3d5d..8aa4ac2156 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -85,7 +85,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -111,8 +110,6 @@ #define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 70e201a352..0b54af5950 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -84,7 +84,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -108,8 +107,6 @@ #define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index 2d2394320c..52368f8ea0 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -297,7 +297,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -315,8 +314,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 0bea46c03c..4284d6a3a9 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -156,7 +156,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -192,8 +191,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_PPC4XX #define CONFIG_SYS_I2C_PPC4XX_CH0 diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index da447f5765..71e90d77d7 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -283,7 +283,4 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ -#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */ - - #endif /* __CONFIG_H */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 3b8e781c9f..7cf09d01f6 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -154,7 +154,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -172,8 +171,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 } #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 748c8341ac..47d16233a3 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -177,7 +177,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -191,8 +190,6 @@ #define CONFIG_SYS_MEMTEST_END 0x003C00000 /* 4 ... 60 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 } #define CONFIG_SYS_CONSOLE_INFO_QUIET 1 diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 51919dbb3f..66303773c3 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -113,7 +113,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36 #define CONFIG_SYS_PLL_FDR 0x7D diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index 9aac784392..cde7305954 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -176,8 +176,6 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000 /* diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 774db310e0..0f6e2f72cf 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 75000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index c6ebdc9f35..ae4fe45fce 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -46,7 +46,6 @@ #define CONFIG_CMD_CACHE #undef CONFIG_CMD_NET -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) @@ -69,8 +68,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 240bc7ed80..3a1cbcae93 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -1,4 +1,4 @@ -TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc. +/* Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * Hayden Fraser (Hayden.Fraser@freescale.com) * * SPDX-License-Identifier: GPL-2.0+ @@ -107,7 +107,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc. #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) #define CONFIG_SYS_I2C_PINMUX_SET (0) -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) @@ -124,8 +123,6 @@ TABILITY or FITNESS FO04-2007 Freescale Semiconductor, Inc. #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 - #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index 629372a5f5..fabfdb93db 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) @@ -93,8 +92,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 - #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index b7b2e18e3e..a9531b0bf3 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -125,7 +125,6 @@ "save\0" \ "" -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 01d42ad6dc..4c84126559 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -129,7 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x20000 #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 66000000 /* diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index f99a545fe6..4dddab7c1d 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -139,7 +139,6 @@ "save\0" \ "" -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 150000000 /* diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index d22018f127..fd970d0787 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 64000000 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 3bf5989f2b..a100d9f316 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 85b4435d8b..78ea384375 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index ccb5d05f4e..849c26562a 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -126,7 +126,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x40010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 6271bdeebd..de063b70d6 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -253,8 +253,6 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000 /* diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 7fc5153c0f..0f4b726f3a 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -187,8 +187,6 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000 /* diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index d3e6457b12..7a55d3c619 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -177,7 +177,7 @@ #define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 80000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSLI2C_OFFSET 0x58000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* DSPI and Serial Flash */ @@ -246,8 +246,6 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_MBAR 0xFC000000 /* diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 75c2b0748b..e88a6bd8d3 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -172,7 +172,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index a15ee7dc13..e4128062a9 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -158,7 +158,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 diff --git a/include/configs/MBX.h b/include/configs/MBX.h index b3cd12df90..96edd442d0 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -82,7 +82,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -98,8 +97,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MBX860T.h b/include/configs/MBX860T.h index 8d1ca48233..74f44df682 100644 --- a/include/configs/MBX860T.h +++ b/include/configs/MBX860T.h @@ -72,8 +72,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index ad9c77e1c8..8a40029809 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -361,13 +361,11 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_LOAD_ADDR 0x2000000 #define CONFIG_LOADADDR 0x4000000 -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 #define CONFIG_LOADS_ECHO 1 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index abb6baa401..32ec0bf065 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -348,7 +348,4 @@ #define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ -#define CONFIG_SYS_HZ 100 /* decr freq: 1 ms ticks */ - - #endif /* __CONFIG_H */ diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h index 0c7a466ba3..6314b5380d 100644 --- a/include/configs/MHPC.h +++ b/include/configs/MHPC.h @@ -129,7 +129,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -144,8 +143,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 5ced2df71d..f248a56421 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -150,7 +150,6 @@ * Miscellaneous configurable options **********************************************************/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -180,8 +179,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index 3cdc0bb145..1bf1bf8c41 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -78,7 +78,6 @@ * Miscellaneous configurable options */ #undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ @@ -153,7 +152,6 @@ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_ETH_DEV_FN 0x00 #define CONFIG_SYS_ETH_IOBASE 0x00104000 diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index d461d004a2..3def26929b 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -272,7 +272,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -287,8 +286,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_FLASH_BASE 0xff800000 diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index f71105157f..39c90aa2b0 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -211,7 +211,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -229,8 +228,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_FLASH_BASE 0xFE000000 diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index d315729b8b..0131b9c6d4 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -462,7 +462,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -471,7 +470,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 34b960e1f4..07719e9265 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -511,7 +511,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print Buffer Size */ @@ -520,7 +519,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index fef19d4b5f..0f9f436e33 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -519,7 +519,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -532,7 +531,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index d5db65df11..a1e5f3b2b2 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -355,7 +355,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -368,7 +367,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 32e05af8ab..71fc497e78 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -441,7 +441,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -454,7 +453,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 8a7fad36f4..3f742a2bba 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -507,7 +507,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -520,7 +519,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index c492d52fb5..e2ae596323 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -562,7 +562,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index 7c4f3ef8f1..ed780f17ff 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -544,7 +544,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -557,7 +556,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 1973447a23..d31be19735 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -405,7 +405,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -418,7 +417,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 51688a76bf..98ffb9c29e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -523,7 +523,6 @@ extern int board_pci_host_broken(void); */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -536,7 +535,6 @@ extern int board_pci_host_broken(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index a5fe220b14..ca28c0eb24 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -538,7 +538,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -551,7 +550,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8ff2c3a4fa..8197f89e4e 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -720,7 +720,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -730,7 +729,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index e7ded0127d..66893688e6 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -376,7 +376,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -387,7 +386,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 150e56ea38..e24c597453 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -391,7 +391,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -400,7 +399,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 7f1628592f..2e76df681b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -422,7 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -431,7 +430,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 8deb241c39..9ff048af6d 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -516,7 +516,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -525,7 +524,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 285872ef3a..7f0f927ea1 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -389,7 +389,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -398,7 +397,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 24102ee8ab..b7c4a60309 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -417,7 +417,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -428,7 +427,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 90b99b3b5e..c9a15395c3 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -411,7 +411,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -420,7 +419,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 3bf01b2c12..341f6a89b4 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -545,7 +545,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ #else @@ -556,7 +555,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index acd39816be..c7511449ea 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -661,7 +661,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -670,7 +669,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 0b2cf87016..97f5c877e1 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -497,7 +497,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -508,7 +507,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index e438b8ef38..8ed5050766 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -650,7 +650,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -661,7 +660,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h index caf6164a30..b24f6eea2f 100644 --- a/include/configs/MUSENKI.h +++ b/include/configs/MUSENKI.h @@ -56,7 +56,6 @@ * Miscellaneous configurable options */ #undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size @@ -151,7 +150,6 @@ */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. */ diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index c03ac6b9d0..9d49de7c61 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -253,7 +253,6 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #undef CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 #else @@ -266,8 +265,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 - /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000 /* default location for tftp and bootm */ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index d24f6a4b4e..efdf1aa670 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -292,7 +292,6 @@ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* * For booting Linux, the board info and command line data diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index db9502ade3..4100b85497 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -103,7 +103,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -209,7 +208,6 @@ */ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 10000 /* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 7 diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index 2ddca10af4..73cd2a9a37 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -85,7 +85,6 @@ * Miscellaneous configurable options */ #undef CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot ?? */ @@ -103,8 +102,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index 43a0f6e60c..f69b9a856c 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -223,7 +223,6 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING #undef CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 #else @@ -236,8 +235,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00800000 #define CONFIG_SYS_MEMTEST_END 0x02f00000 -#define CONFIG_SYS_HZ 1000 - /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x02000000 /* default location for tftp and bootm */ diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index dc4a7681be..9fd4551426 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -123,7 +122,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 #endif /* __MIGO_R_H */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index dbf2efc69e..08cfc9e4bc 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -118,7 +118,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 @@ -136,8 +135,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 53b0f13687..800a922678 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -131,7 +131,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 @@ -149,8 +148,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 18ab2cca15..55ae4b5338 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -119,7 +119,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 @@ -137,8 +136,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index 0fd635dc27..4a0fa9e119 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -104,7 +104,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -119,8 +118,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 46faa5d6e9..a9c649abe9 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -118,7 +118,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ @@ -138,8 +137,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/NX823.h b/include/configs/NX823.h index 9cfa087345..6d468dfcd1 100644 --- a/include/configs/NX823.h +++ b/include/configs/NX823.h @@ -68,7 +68,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -83,8 +82,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 11e7b5baf8..7baba93c82 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -75,7 +75,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -107,8 +106,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index b269a33cb0..5a9bee3496 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -73,7 +73,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -105,8 +104,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ba3f7c2821..c1cfbd40b6 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -120,7 +120,11 @@ #endif /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" +#endif #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 @@ -152,10 +156,7 @@ #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ -#ifndef CONFIG_SDCARD #define CONFIG_MISC_INIT_R -#endif - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -203,25 +204,24 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 - #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 #define CONFIG_SYS_DDR_RCW_1 0x00000000 #define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0x470C0000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL_2 0x04401010 +#define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ +#define CONFIG_SYS_DDR_CONTROL_2 0x24401000 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4644 +#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 +#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 +#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 -#define CONFIG_SYS_DDR_MODE_1_800 0x40461520 -#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 +#define CONFIG_SYS_DDR_MODE_1_800 0x00441420 +#define CONFIG_SYS_DDR_MODE_2_800 0x00000000 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 -#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 +#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 /* settings for DDR3 at 667MT/s */ #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 @@ -256,10 +256,6 @@ extern unsigned long get_sdram_size(void); * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable */ -/* In case of SD card boot, IFC interface is not available because of muxing */ -#ifdef CONFIG_SDCARD -#define CONFIG_SYS_NO_FLASH -#else /* * IFC Definitions */ @@ -322,6 +318,8 @@ extern unsigned long get_sdram_size(void); | CSPR_MSEL_NAND \ | CSPR_V) #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ @@ -329,13 +327,26 @@ extern unsigned long get_sdram_size(void); | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ +#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) + +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ + | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) +#endif #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#if defined(CONFIG_P1010RDB_PA) /* NAND Flash Timing Params */ #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ FTIM0_NAND_TWP(0x0C) | \ @@ -350,6 +361,23 @@ extern unsigned long get_sdram_size(void); FTIM2_NAND_TWHRE(0x0f) #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) +#elif defined(CONFIG_P1010RDB_PB) +/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 +#endif + #define CONFIG_SYS_NAND_DDR_LAW 11 /* Set up IFC registers for boot location NOR/NAND */ @@ -410,7 +438,6 @@ extern unsigned long get_sdram_size(void); FTIM2_GPCM_TCH(0x0) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 -#endif /* CONFIG_SDCARD */ #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT @@ -482,9 +509,21 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_FSL_I2C2_SPEED 400000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define I2C_PCA9557_ADDR1 0x18 +#define I2C_PCA9557_ADDR2 0x19 +#define I2C_PCA9557_BUS_NUM 0 /* I2C EEPROM */ -#undef CONFIG_ID_EEPROM +#if defined(CONFIG_P1010RDB_PB) +#define CONFIG_ID_EEPROM +#ifdef CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#endif +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ +#endif /* enable read and write access to EEPROM */ #define CONFIG_CMD_EEPROM #define CONFIG_SYS_I2C_MULTI_EEPROMS @@ -567,12 +606,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LBA48 #endif /* #ifdef CONFIG_FSL_SATA */ -/* SD interface will only be available in case of SD boot */ -#ifdef CONFIG_SDCARD #define CONFIG_MMC -#define CONFIG_DEF_HWCONFIG esdhc -#endif - #ifdef CONFIG_MMC #define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION @@ -613,9 +647,14 @@ extern unsigned long get_sdram_size(void); #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_NAND) #define CONFIG_ENV_IS_IN_NAND +#if defined(CONFIG_P1010RDB_PA) #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ +#endif #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) @@ -664,7 +703,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -675,7 +713,6 @@ extern unsigned long get_sdram_size(void); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ /* * Internal Definitions @@ -708,7 +745,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_HAS_ETH2 #endif -#define CONFIG_HOSTNAME P1010RDB #define CONFIG_ROOTPATH "/opt/nfsroot" #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ @@ -747,7 +783,31 @@ extern unsigned long get_sdram_size(void); "ext2load usb 0:4 $loadaddr $bootfile;" \ "ext2load usb 0:4 $fdtaddr $fdtfile;" \ "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ + CONFIG_BOOTMODE + +#if defined(CONFIG_P1010RDB_PA) +#define CONFIG_BOOTMODE \ + "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ + "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ + "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ + "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" + +#elif defined(CONFIG_P1010RDB_PB) +#define CONFIG_BOOTMODE \ + "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ + "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ + "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ + "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ + "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ + "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ + "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ + "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ + "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ + "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" +#endif #define CONFIG_RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ @@ -759,8 +819,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index edece1f9b5..1470526d0b 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -705,7 +705,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -715,7 +714,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* * For booting Linux, the board info and command line data diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index cd6d20c729..e49523e940 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -312,7 +312,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -323,7 +322,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index a8202c67fd..2aa1f59ea7 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -448,7 +448,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -459,7 +458,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index adaed564f7..282f5c1a12 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -586,7 +586,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -596,7 +595,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 08d1c25914..9cc219e5a8 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -412,7 +412,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -422,7 +421,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 785e497f20..8a29eaa507 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -651,7 +651,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -660,7 +659,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 862614b5c2..0df6f1a2d9 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -655,7 +655,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -667,7 +666,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq 1ms ticks */ /* * For booting Linux, the board info and command line data @@ -746,8 +744,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 354e9d211b..ac75d3ebfa 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -136,7 +136,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -150,8 +149,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 732fe64d4e..d823b0f3cc 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -94,8 +94,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 } diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 53e0d9fd8f..3b5c73e9f7 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -73,7 +73,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -110,8 +109,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #undef CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 84ef49c9c5..7ae25d7b66 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -101,7 +101,6 @@ * If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ @@ -140,7 +139,6 @@ * MISC *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* Provide extended help*/ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16 /* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */ diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index c67e61f79a..1180724862 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -143,7 +143,6 @@ * Miscellaneous configurable options **********************************************************/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -173,8 +172,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index afa273d89f..e7d08647fc 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -111,7 +111,6 @@ * If the default period is acceptable, TMRCNT can be left undefined. * TMRMS represents the desired mecs per tick (msecs per interrupt). *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CONFIG_SYS_NIOS_TMRIRQ 3 /* Timer IRQ num */ @@ -213,7 +212,6 @@ * MISC *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* Provide extended help*/ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16 /* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg buf size */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 912bcf59f8..947b3d857a 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -95,7 +95,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -134,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 218dca0266..557a8bad7e 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -251,7 +251,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -266,8 +265,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index b466513ea3..5aeba4dc4e 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -168,7 +168,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -183,8 +182,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 8ca2400a08..49b4571e1a 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -168,7 +168,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -183,8 +182,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ /* diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 67a96d29d4..9fab4b2c7d 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -90,7 +90,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -128,8 +127,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 3d6dc91a0b..0984095332 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -79,7 +79,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -104,8 +103,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index a54c099ce4..5ab9315b1d 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -372,7 +372,6 @@ * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -388,8 +387,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index fbf8a996ce..2a82f94b65 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -86,13 +86,11 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index bdfe3c1b27..1b17afa61a 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -157,7 +157,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -194,8 +193,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /*----------------------------------------------------------------------- diff --git a/include/configs/QS823.h b/include/configs/QS823.h index d712828245..6733460425 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -218,7 +218,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -236,8 +235,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 3229095ddf..f11421387c 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -218,7 +218,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -236,8 +235,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h index 7c77c6b854..9958c09d71 100644 --- a/include/configs/QS860T.h +++ b/include/configs/QS860T.h @@ -127,7 +127,6 @@ CONFIG_SPI * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -146,8 +145,6 @@ CONFIG_SPI #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index efe699538c..009d1cf976 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -134,7 +134,6 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 /* must set console from env */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -149,8 +148,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * JFFS2 partitions */ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 7b10d289b9..e7e061cb3e 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -119,7 +119,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -134,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x0100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index 6ba8a02bcb..0f07d0cfe9 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -101,7 +101,6 @@ */ #define CONFIG_SYS_RESET_ADDRESS 0x80000000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -116,8 +115,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index ada7e145c0..a28230a5d7 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -98,7 +98,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -115,8 +114,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index ffc84d2901..50c82c68eb 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -162,8 +162,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index d4d3d5738d..28884295e7 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -148,7 +148,6 @@ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* @@ -214,7 +213,6 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * Low Level Configuration Settings diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 06273a2ae1..97f779871f 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -145,7 +145,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -160,8 +159,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index 7d4e5e72a6..1cdd18c0ba 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -155,7 +155,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -170,8 +169,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_FLASH_BASE 0xFE000000 diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index 1045afb0c2..40fb63d14f 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -357,7 +357,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ @@ -366,7 +365,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/SM850.h b/include/configs/SM850.h index 5d48f8f8c4..a7e44647a3 100644 --- a/include/configs/SM850.h +++ b/include/configs/SM850.h @@ -76,7 +76,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) && defined(KGDB_DEBUG) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -91,8 +90,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index 147cf5bec1..a8b4fbb7f8 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -84,7 +84,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -103,8 +102,6 @@ #define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index e2b05de381..38940194fb 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -155,7 +155,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save a little memory */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -170,8 +169,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h index ed8a32f7df..8a689b3573 100644 --- a/include/configs/Sandpoint8240.h +++ b/include/configs/Sandpoint8240.h @@ -98,13 +98,11 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h index 97e8968243..a17f5ad860 100644 --- a/include/configs/Sandpoint8245.h +++ b/include/configs/Sandpoint8245.h @@ -66,13 +66,11 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h new file mode 100644 index 0000000000..2738242c54 --- /dev/null +++ b/include/configs/T1040QDS.h @@ -0,0 +1,761 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * T1040 QDS board configuration file + */ +#define CONFIG_T1040QDS +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_PCIE4 /* PCIE controler 4 */ + +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1105) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 +#define CONFIG_FSL_DDR_INTERACTIVE + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x51 + +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) +#define QIXIS_LBMAP_SWITCH 0x06 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 + +#define I2C_MUX_PCA_ADDR 0x77 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ + + +/* I2C bus multiplexer */ +#define I2C_MUX_CH_DEFAULT 0x8 + +/* + * RTC configuration + */ +#define RTC +#define CONFIG_RTC_DS3231 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +#ifdef CONFIG_PCI +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#ifdef CONFIG_PCIE1 +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#ifdef CONFIG_PCIE2 +#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#ifdef CONFIG_PCIE3 +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 4, Base address 203000 */ +#ifdef CONFIG_PCIE4 +#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ +#endif + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#define CONFIG_FSL_SATA_V2 +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* +* USB +*/ +#define CONFIG_HAS_FSL_DR_USB + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 25 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 25 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x10 +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x11 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 +#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c +#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d +#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e +#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ + "bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t1040qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t1040qds/t1040qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 92a30ab09f..3777ccb835 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -463,6 +463,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ @@ -553,8 +554,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h index e1a2c12c61..5ad9383622 100644 --- a/include/configs/TASREG.h +++ b/include/configs/TASREG.h @@ -61,7 +61,6 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) @@ -84,8 +83,6 @@ #define CONFIG_SYS_MEMTEST_START 0x400 #define CONFIG_SYS_MEMTEST_END 0x380000 -#define CONFIG_SYS_HZ 1000 - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index 47e74e7999..90f7fc4d79 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -386,7 +386,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -410,8 +409,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 4ad857e98d..5e1c52d85a 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -154,7 +154,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -175,8 +174,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h index b5f330fb6f..7aba00914d 100644 --- a/include/configs/TOP5200.h +++ b/include/configs/TOP5200.h @@ -317,7 +317,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -332,8 +331,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 5c5ce84ff1..da68503a69 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK #define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK #define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK /*----------------------------------------------------------------------- @@ -118,7 +117,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 6a9f64e17b..13500ee139 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -605,7 +605,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -632,8 +631,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index 0221d16a44..cc2204586e 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -127,7 +127,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -146,8 +145,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 514bbecd54..4fd070f27d 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -122,7 +122,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -141,8 +140,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 1b02cbbca7..b34b0a865b 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -228,7 +228,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -247,8 +246,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */ /* diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 3f586fbbc1..78e8b03cd1 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -290,7 +290,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if 0 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ @@ -311,8 +310,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x300000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0x40000104 /* "bad" address */ /* diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 194dc8b62a..fc254256a0 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -316,7 +316,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ @@ -334,7 +333,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #undef CONFIG_WATCHDOG /* watchdog disabled */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index fc854d9916..ca3750d407 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -111,7 +111,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -130,8 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 7bf685da05..659c9ad1c3 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -112,7 +112,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -131,8 +130,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index f8bf75b713..906d79b0c8 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -115,7 +115,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -134,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 37e3541d68..44d456e165 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -145,7 +145,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -164,8 +163,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index a6e36b3de3..855b0cddc4 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -114,7 +114,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -133,8 +132,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 78ecb47692..8109379ae9 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -115,7 +115,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -134,8 +133,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 379698a55f..da4af93d25 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -118,7 +118,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -137,8 +136,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index ca7dd35fc0..ec3a57b961 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -118,7 +118,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -137,8 +136,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index 30e94013b0..cb8b84d3a1 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -158,7 +158,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -177,8 +176,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 8263752573..d1e6c5b2bb 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -152,7 +152,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -173,8 +172,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index dbd281415b..acc4fdc668 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -279,7 +279,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -294,8 +293,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 20344937bd..79a6079370 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -162,7 +162,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x30800000 /* we configure PWM Timer 4 to 1ms 1000Hz */ -#define CONFIG_SYS_HZ 1000 /* support additional compression methods */ #define CONFIG_BZIP2 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 91fd93b331..3d46afe4e8 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -93,7 +93,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -132,8 +131,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 4a2ee91dda..319a9a227d 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -82,7 +82,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -119,8 +118,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index c4f680bec7..1ceef113d6 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -203,7 +203,6 @@ #define CONFIG_SYS_LONGHELP /* monitor command prompt */ -#define CONFIG_SYS_PROMPT "=> " /* console i/o buffer size */ #if defined(CONFIG_CMD_KGDB) @@ -232,7 +231,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000 /* configure flash */ #define CONFIG_SYS_FLASH_BASE 0xff800000 diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 54ca4997b5..8fda1b1ea5 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -126,8 +126,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index ac194a4efa..6836fc7b5f 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -134,8 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 6999384653..d2038e56d0 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -84,7 +84,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -121,8 +120,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index c28f21d1fb..01cb2c85c0 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -139,7 +139,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -154,8 +153,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h index 80a381595c..cac6a677ba 100644 --- a/include/configs/ZUMA.h +++ b/include/configs/ZUMA.h @@ -131,7 +131,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -146,8 +145,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ - #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index bcb7ab47ba..0d3cf369b6 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -37,7 +37,6 @@ /* * Timer */ -#define CONFIG_SYS_HZ 1000 /* timer ticks per second */ /* * Real Time Clock diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index 43d3d99bcb..d151869d7b 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -245,7 +245,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER @@ -265,7 +264,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_LOOPW #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h index 75b6526127..64737020f5 100644 --- a/include/configs/a4m072.h +++ b/include/configs/a4m072.h @@ -271,7 +271,6 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -286,8 +285,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index a2090dac86..1205557d88 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -440,9 +440,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/actux1.h b/include/configs/actux1.h index 33669c2e83..3315f54f38 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -64,7 +64,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ @@ -79,7 +78,6 @@ /* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index 533f46976a..fb391ecd59 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -57,7 +57,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ @@ -72,7 +71,6 @@ /* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 76b5efd8a1..61d96f5ed0 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -55,7 +55,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ @@ -70,7 +69,6 @@ /* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index 1df0a7caab..23872794e3 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -62,7 +62,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ @@ -77,7 +76,6 @@ /* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66000000 -#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 81f71b9b72..e31131f6e2 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -40,12 +40,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 48000000 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 48afbf4467..ded3f331e8 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -40,12 +40,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 39062500 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index 681dfa251c..1e4ce2e7d9 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -32,12 +32,6 @@ /* * Timer */ - -/* - * According to the discussion in u-boot mailing list before, - * CONFIG_SYS_HZ at 1000 is mandatory. - */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ (66000000 * 2) #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ diff --git a/include/configs/aev.h b/include/configs/aev.h index 33d7815e98..0eafb3ca74 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -320,7 +320,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -338,8 +337,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index d99d6719ae..5e718980ff 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -17,7 +17,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000 #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO diff --git a/include/configs/alpr.h b/include/configs/alpr.h index f0a89623c3..2bf1986e3a 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -238,7 +238,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -255,8 +254,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index 3e18a657fa..2c69d4e30c 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -144,7 +144,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 1fd2508fe9..c5e67bf87d 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -239,7 +239,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 6500878121..5ff65c6d58 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -231,7 +231,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 5c802a1546..d9b6c16baa 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -24,6 +24,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "U-Boot# " #define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ @@ -75,7 +76,6 @@ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 @@ -132,4 +132,14 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_AM437X_USB2PHY2_HOST + #endif /* __CONFIG_AM43XX_EVM_H */ diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 580d079ed1..c9e9a038d4 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -74,7 +74,6 @@ */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -90,8 +89,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_LOOPW /* enable loopw command */ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index af3a4277e2..933de52c56 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -51,7 +51,6 @@ /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* Buffer size for input from the Console */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for Console output */ @@ -155,7 +154,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 #endif /* __AP325RXA_H */ diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h index b9112910e7..83a5c37e43 100644 --- a/include/configs/ap_sh4a_4a.h +++ b/include/configs/ap_sh4a_4a.h @@ -67,7 +67,6 @@ /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* Buffer size for input from the Console */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for Console output */ @@ -158,7 +157,8 @@ #else #define CONFIG_SYS_CLK_FREQ 44444444 #endif +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __AP_SH4A_4A_H */ diff --git a/include/configs/apf27.h b/include/configs/apf27.h index e7e258fa60..1193013ea0 100644 --- a/include/configs/apf27.h +++ b/include/configs/apf27.h @@ -321,11 +321,12 @@ */ #ifdef CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE IMX_I2C1_BASE -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F +#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F #define CONFIG_SYS_I2C_NOPROBES { } #ifdef CONFIG_CMD_EEPROM diff --git a/include/configs/aria.h b/include/configs/aria.h index b5e212e9d8..32216cd50e 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -469,7 +469,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -485,8 +484,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 9f357eadb2..e5569c7296 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -60,7 +60,6 @@ #define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -138,7 +137,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 50000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/arndale.h b/include/configs/arndale.h index ed44a0424c..45fa047b35 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -144,8 +144,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8 diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index f0dd6ccb74..d875753a66 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -110,10 +110,8 @@ /* * Defines processor clock - important for correct timings concerning serial * interface etc. - * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) #define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 27e32e24e3..5d96c31f99 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -43,7 +43,6 @@ #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3 ) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000 /* CPU configuration */ #define CONFIG_AT91RM9200 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 248d6ee73c..1c4bb812f0 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -28,7 +28,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000 /* Define actual evaluation board type from used processor type */ #ifdef CONFIG_AT91SAM9G20 diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 819ae72bcd..226f8c1612 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -14,7 +14,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #ifdef CONFIG_AT91SAM9G10 #define CONFIG_AT91SAM9G10EK /* It's an Atmel AT91SAM9G10 EK*/ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index e3faec729d..0a1969df98 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -26,7 +26,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index fc4ecec7ad..2095fe6879 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -21,7 +21,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 4cdaed178b..4ec1799ebc 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -24,7 +24,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000 /* Misc CPU related */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index b08848ef73..3747098d2a 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -18,7 +18,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index cb57be0b5d..ea9a50e0b1 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -16,7 +16,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91SAM9X5EK #define CONFIG_AT91FAMILY diff --git a/include/configs/atc.h b/include/configs/atc.h index b661e95e04..fa391b6280 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -136,7 +136,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -153,8 +152,6 @@ #define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 /* "bad" address */ #define CONFIG_SYS_ALLOC_DPRAM diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index c87e4147cd..597bede85e 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -15,8 +15,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_ATNGW100 -#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index 8e4ad073cd..bd4dca5217 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -18,12 +18,6 @@ #define CONFIG_ATNGW100MKII /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency * and the PBA bus to run at 1/4 the PLL frequency. diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 5be563ce0d..fd76572a47 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000 /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index a49d0add82..2562460b98 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000 /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 7f3976c54f..8e32a10b19 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -17,12 +17,6 @@ #define CONFIG_ATSTK1000 /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 97470dfad8..9ce22649e7 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -16,11 +16,6 @@ #define CONFIG_ATSTK1006 #define CONFIG_ATSTK1000 -/* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index cbf2853549..12df45b0fa 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -73,7 +73,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index d20074c731..febee45b3b 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_OSCIN_FREQ calimain_get_osc_freq() #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x60000000 #define CONFIG_DA850_LOWLEVEL #define CONFIG_SYS_DA850_PLL_INIT diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 2e024f54a9..c1042aecbf 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -17,7 +17,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM365 #define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM diff --git a/include/configs/canmb.h b/include/configs/canmb.h index 485bf1658e..d929bde8f2 100644 --- a/include/configs/canmb.h +++ b/include/configs/canmb.h @@ -174,7 +174,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -189,8 +188,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 5cf456a78e..d5db8f504f 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -143,7 +143,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 9447c0b935..1cb54b3225 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ -#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index 306684ac0d..adebd4b7b0 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00008000 /* default load address */ -#define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 17824ec9a9..ac3d6bd343 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -283,7 +283,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -296,7 +295,6 @@ #define CONFIG_LOOPW 1 #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * Various low-level settings diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index eff35b9b0d..516ef7f301 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -259,7 +259,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 417c873574..32cecbdc9c 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -82,7 +82,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -97,8 +96,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 } diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index b13898815a..464436930d 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -37,11 +37,9 @@ /* --- * Defines processor clock - important for correct timings concerning serial * interface etc. - * CONFIG_SYS_HZ gives unit: 1000 -> 1 Hz ^= 1000 ms * --- */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 66000000 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index 4a8e5830e1..02b25c6444 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -124,7 +124,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -139,8 +138,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index c57d70279f..c98b687c09 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -89,7 +89,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -104,8 +103,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_ALLOC_DPRAM diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index ee0342b44b..08bd276b44 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -86,7 +86,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ @@ -101,7 +100,6 @@ /* * Clock Configuration */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index c6aad01dba..413f0867f4 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -383,7 +383,6 @@ #endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -440,7 +439,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_HW_WATCHDOG #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index d1be5e3c0c..556b42a38b 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -222,7 +222,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * SDRAM Configuration diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c3fb80c8d0..562caa5845 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -653,7 +653,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -662,7 +661,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data @@ -700,8 +698,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ "bank_intlv=cs0_cs1;" \ - "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ + "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ @@ -745,8 +743,6 @@ #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h index eb56f96988..db5ceadba6 100644 --- a/include/configs/cpci5200.h +++ b/include/configs/cpci5200.h @@ -253,7 +253,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -268,8 +267,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index 796dfc39a5..ccf36a5f93 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -20,7 +20,6 @@ #define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #if defined(CONFIG_CPU9G20) diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index 67732de3a8..49cfabdc6b 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -25,7 +25,6 @@ #define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) -#define CONFIG_SYS_HZ 1000 #define CONFIG_ARM920T #define CONFIG_AT91RM9200 diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 6ae19e4b87..ca0bffa72e 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -109,7 +109,6 @@ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -121,8 +120,6 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 0c467c51f8..596095d21f 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -108,7 +108,6 @@ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -121,7 +120,6 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 3e71ae5a3e..c4cc62ecb4 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 9845506039..509fe20d2c 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index 07b1bdd082..6382e75b95 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -18,7 +18,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM355 /* Memory Info */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index f7adbd86ce..234bbc0996 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -17,7 +17,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM355 /* DM355 based board */ /* Memory Info */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 1f49e514ac..b547289d2d 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -18,7 +18,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM365 /* Memory Info */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 7f57877752..2132342eb7 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -27,7 +27,6 @@ extern unsigned int davinci_arm_clk_get(void); /* Timer Input clock freq */ #define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2) #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM646X /* EEPROM definitions for EEPROM */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index ca2cb2db72..d8fa64600a 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -44,7 +44,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 299a2e8bb2..f9a0a76d36 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -22,7 +22,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*=============*/ /* Memory Info */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 6ebbe818a5..44449df9cd 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -19,7 +19,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index a81364ce55..ac543f8d94 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -46,7 +46,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 07c60abec4..da4ff8e61d 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -133,8 +133,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ diff --git a/include/configs/debris.h b/include/configs/debris.h index c9fb8d78cb..621f895011 100644 --- a/include/configs/debris.h +++ b/include/configs/debris.h @@ -143,13 +143,11 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index ed8ba1abc4..bcb21fefe3 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -61,7 +61,6 @@ * U-Boot General Configurations */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index c1e996e448..8343891cb8 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -257,7 +257,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 08d49fb00d..c19c4c7549 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -239,7 +239,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index a5215db298..bc5853eb5c 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -393,7 +393,6 @@ #define CONFIG_SYS_LONGHELP #define CONFIG_AUTO_COMPLETE 1 #define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTOBOOT_KEYED @@ -416,8 +415,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 - /* * Various low-level settings */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 0f0dd21c23..96db44f518 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -52,7 +52,6 @@ /* Remove or override few declarations from mv-common.h */ #undef CONFIG_SYS_PROMPT -#define CONFIG_SYS_PROMPT "=> " /* * Ethernet Driver configuration diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7186ce709c..8a69c7d0a6 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -72,4 +72,15 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +/* USB xHCI HOST */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_OMAP_USB2PHY2_HOST + #endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 141879540f..87b3314841 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -63,7 +63,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ @@ -78,7 +77,6 @@ /* timer clock - 2* OSC_IN system clock */ #define CONFIG_IXP425_TIMER_CLK 66666666 -#define CONFIG_SYS_HZ 1000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x00010000 diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index 0767df1993..ca9792c451 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -71,7 +71,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 8 /* max number of command args */ @@ -217,7 +216,6 @@ * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index e08423a097..58e40ed888 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 #define CONFIG_DA8XX_GPIO diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 08ba883f4c..bdca705874 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -98,7 +98,6 @@ /*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ @@ -153,7 +152,7 @@ #define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 #define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 5c2c73ad4b..2d8c42cf57 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -60,7 +60,6 @@ #define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */ #define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 2c9594be03..335e9cdffa 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -92,7 +92,6 @@ /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* Buffer size for input from the Console */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for Console output */ @@ -179,7 +178,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 41666666 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __ECOVEC_H */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 9c701099ad..8b9f66a29c 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -34,8 +34,6 @@ * CLKs configurations */ -#define CONFIG_SYS_HZ 1000 - /* * Board-specific values for Orion5x MPP low level init: * - MPPs 12 to 15 are SATA LEDs (mode 5) diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 90033fa10f..03b74a2dab 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_DA850_LOWLEVEL #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_DA850_PLL_INIT @@ -228,7 +227,6 @@ * U-Boot general configuration */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "=> " /* Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h index e95d312f9e..f1af96ddbb 100644 --- a/include/configs/ep8248.h +++ b/include/configs/ep8248.h @@ -139,7 +139,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -154,8 +153,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_FLASH_BASE 0xFF800000 diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index aba3392234..56b4ecf272 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -266,7 +266,6 @@ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* Define this variable to enable the "hush" shell (from Busybox) as command line interpreter, thus enabling @@ -359,8 +358,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index a3b3349598..18e4dafc5c 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -165,8 +165,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /*----------------------------------------------------------------------- diff --git a/include/configs/espt.h b/include/configs/espt.h index e906efbdba..1bd7eeceb9 100644 --- a/include/configs/espt.h +++ b/include/configs/espt.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -98,8 +97,9 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 /* Ether */ #define CONFIG_SH_ETHER 1 diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 7fd0b51860..252df54e98 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -31,7 +31,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 8c21909d63..bdefee108d 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -37,6 +37,8 @@ /* Keep L2 Cache Disabled */ #define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* Enable ACE acceleration for SHA1 and SHA256 */ #define CONFIG_EXYNOS_ACE_SHA #define CONFIG_SHA_HW_ACCEL @@ -132,8 +134,9 @@ /* USB */ #define CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_EXYNOS +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE /* USB boot mode */ @@ -177,8 +180,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_RD_LVL #define CONFIG_NR_DRAM_BANKS 8 diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 14f0784817..fc015e6939 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -18,12 +18,6 @@ #define CONFIG_FAVR32_EZKIT_EXT_FLASH /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 655df67961..84175676c2 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -50,11 +50,10 @@ /* * Hardware drivers */ -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C3_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0xfe +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 2 /* I2C3 */ +#define CONFIG_SYS_MXC_I2C3_SLAVE 0xfe #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO @@ -130,8 +129,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - /* * Physical Memory Map */ diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 011a3b315c..560363d237 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -352,7 +352,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1 diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h index 86de48e496..2437b4b613 100644 --- a/include/configs/gr_cpci_ax2000.h +++ b/include/configs/gr_cpci_ax2000.h @@ -289,7 +289,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -304,8 +303,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h index cb651b0b0c..2cd6eaedcc 100644 --- a/include/configs/gr_ep2s60.h +++ b/include/configs/gr_ep2s60.h @@ -278,7 +278,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -293,8 +292,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * USB stuff *----------------------------------------------------------------------- diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h index 50cf3f6f52..39036cdf7e 100644 --- a/include/configs/gr_xc3s_1500.h +++ b/include/configs/gr_xc3s_1500.h @@ -237,7 +237,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -252,8 +251,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h index c288b39f2d..938ee86281 100644 --- a/include/configs/grasshopper.h +++ b/include/configs/grasshopper.h @@ -16,12 +16,6 @@ #define CONFIG_AT32AP7000 /* - * Timer clock frequency. We're using the CPU-internal COUNT register - * for this, so this is equivalent to the CPU core clock frequency - */ -#define CONFIG_SYS_HZ 1000 - -/* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the * PLL frequency. diff --git a/include/configs/grsim.h b/include/configs/grsim.h index 69ac0c10bf..2d977ceeb6 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -264,7 +264,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -279,8 +278,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /***** Gaisler GRLIB IP-Cores Config ********/ /* AMBA Plug & Play info display on startup */ diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h index 531c4bc4be..36ebaf7ff7 100644 --- a/include/configs/grsim_leon2.h +++ b/include/configs/grsim_leon2.h @@ -262,7 +262,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -277,8 +276,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /***** Gaisler GRLIB IP-Cores Config ********/ #define CONFIG_SYS_GRLIB_SDRAM 0 diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 545fa85377..3416fe3cec 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -291,7 +291,6 @@ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* @@ -352,7 +351,6 @@ #define CONFIG_CLOCKS_IN_MHZ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* memtest works from the end of the exception vector table diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 19ecc9ad6c..d02648420f 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -17,8 +17,6 @@ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_HZ 1000 - #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 38c70aca32..3f2fadbb58 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -13,8 +13,6 @@ #define CONFIG_AT32AP7000 #define CONFIG_HAMMERHEAD -#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 125 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index b8197ac189..73e1624375 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" diff --git a/include/configs/hermes.h b/include/configs/hermes.h index 1af529627e..736ffb613d 100644 --- a/include/configs/hermes.h +++ b/include/configs/hermes.h @@ -70,7 +70,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -87,8 +86,6 @@ #define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */ /* * Low Level Configuration Settings diff --git a/include/configs/highbank.h b/include/configs/highbank.h index afb6e64e1b..b86eb430a1 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH -#define CFG_HZ 1000 -#define CONFIG_SYS_HZ CFG_HZ #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP @@ -21,6 +19,10 @@ #define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SYS_BOOTMAPSZ (16 << 20) +#define CONFIG_SYS_TIMER_RATE (150000000/256) +#define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4) +#define CONFIG_SYS_TIMER_COUNTS_DOWN + /* * Size of malloc() pool */ @@ -80,7 +82,7 @@ #define CONFIG_RESET_TO_RETRY #define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay - +#define CONFIG_AUTOBOOT_KEYED_CTRLC /* * Miscellaneous configurable options */ diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h index 9073d7e6c7..1c74a2e96e 100644 --- a/include/configs/hmi1001.h +++ b/include/configs/hmi1001.h @@ -214,7 +214,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -237,8 +236,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index f73de6814d..cc250649ea 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -256,7 +256,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -271,8 +270,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_I2C_SPEED 50000 diff --git a/include/configs/idmr.h b/include/configs/idmr.h index 3cae30a0b4..b882cf0699 100644 --- a/include/configs/idmr.h +++ b/include/configs/idmr.h @@ -110,7 +110,6 @@ #define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB) diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index ae6828bd78..ad1614abbb 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -111,7 +111,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c6b852969b..9c25efe851 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -16,7 +16,6 @@ #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX27 #define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_DISPLAY_CPUINFO @@ -160,7 +159,6 @@ /* * U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print buffer sz */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 0d0715869d..8428d84496 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -117,8 +117,6 @@ #define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1e2b12cb25..7b5569579e 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -35,11 +35,10 @@ * Hardware drivers */ -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ #define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET -#define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE @@ -121,8 +120,6 @@ #define CONFIG_SYS_LOAD_ADDR 0 /* default load address */ -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING /* diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 0ff9a7ff82..7d2715d094 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -106,8 +106,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 6242a94172..608d7592f1 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -325,7 +325,6 @@ static inline void tws_data_config_output(unsigned output) * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -348,8 +347,6 @@ static inline void tws_data_config_output(unsigned output) #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Enable loopw command. */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 94cdfd29da..267a92b2d0 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -12,7 +12,6 @@ #define CONFIG_SYS_TEXT_BASE 0x01000000 #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h index 155663eb2d..fdd5680741 100644 --- a/include/configs/ipam390.h +++ b/include/configs/ipam390.h @@ -33,7 +33,6 @@ #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT #define CONFIG_SYS_TEXT_BASE 0xc1080000 diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h index d2351cc53a..408168b9bc 100644 --- a/include/configs/ipek01.h +++ b/include/configs/ipek01.h @@ -278,7 +278,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -297,7 +296,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_LOOPW /* diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index d0609f6250..b34e3422da 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -12,7 +12,6 @@ #define CONFIG_MB86R0x #define CONFIG_MB86R0x_IOCLK get_bus_freq(0) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x10000000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 71f1e72528..7e18d8e7b5 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -70,7 +70,6 @@ #define CONFIG_SYS_BARGSIZE 256 /* Boot Argument Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0xc0040000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0xc2000000 /* 4..128 MB */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h index 01c087b0d3..71e8ececfc 100644 --- a/include/configs/jupiter.h +++ b/include/configs/jupiter.h @@ -243,7 +243,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -262,8 +261,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 91ca480f48..2a15ad469b 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -39,7 +39,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -55,16 +54,12 @@ #define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */ - #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_SYS_I2C_INIT_BOARD - /* Support the IVM EEprom */ #define CONFIG_SYS_IVM_EEPROM_ADR 0x50 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 @@ -80,8 +75,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - /* UBI Support for all Keymile boards */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE @@ -167,7 +160,7 @@ "add_default=" \ "setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off3" \ + ":${hostname}:${netdev}:off:" \ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ " mem=${kernelmem} init=${init}" \ CONFIG_KM_ECC_MODE \ diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 8ee0ac6dbf..2cebb2bb0c 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -17,6 +17,9 @@ #define CONFIG_CMD_DTT #define CONFIG_JFFS2_CMDLINE +/* standard km ethernet_present for piggy */ +#define CONFIG_KM_COMMON_ETH_INIT + /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE @@ -32,6 +35,9 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +/* Reserve 4 MB for malloc */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + /****************************************************************************** * (PRAM usage) * ... ------------------------------------------------------- diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index e0368cb894..e74f85f604 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -54,6 +54,9 @@ #define CONFIG_ENV_SPI_MODE SPI_MODE_3 #endif +/* Reserve 4 MB for malloc */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + #include "asm/arch/config.h" #define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */ @@ -161,6 +164,7 @@ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */ /* * UBI related stuff @@ -173,10 +177,9 @@ #undef CONFIG_I2C_MVTWSI #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ -#if defined(CONFIG_SYS_I2C_SOFT) - #define CONFIG_SYS_NUM_I2C_BUSES 6 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ @@ -211,7 +214,6 @@ int get_scl(void); #define CONFIG_SYS_I2C_SOFT_SLAVE 0x0 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 -#endif /* EEprom support 24C128, 24C256 valid for environment eeprom */ #define CONFIG_SYS_I2C_MULTI_EEPROMS diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h new file mode 100644 index 0000000000..2d5320b5cd --- /dev/null +++ b/include/configs/km/kmp204x-common.h @@ -0,0 +1,450 @@ +/* + * (C) Copyright 2013 Keymile AG + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_KMP204X_H +#define _CONFIG_KMP204X_H + +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P2041 + +#define CONFIG_SYS_TEXT_BASE 0xfff80000 + +#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" + +#define CONFIG_NAND_ECC_BCH + +/* common KM defines */ +#include "keymile-common.h" + +#define CONFIG_SYS_RAMBOOT +#define CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/keymile/kmp204x/pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/keymile/kmp204x/rcw_kmp204x.cfg + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_SYS_DPAA_RMAN /* RMan */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +/* Environment in SPI Flash */ +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 20000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB for u-boot */ +#define CONFIG_ENV_SIZE 0x004000 /* 16K env */ +#define CONFIG_ENV_SECT_SIZE 0x010000 +#define CONFIG_ENV_OFFSET_REDUND 0x110000 +#define CONFIG_ENV_TOTAL_SIZE 0x020000 + +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00800000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ + CONFIG_RAMBOOT_TEXT_BASE) +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 +#define CONFIG_FSL_DDR_INTERACTIVE + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/****************************************************************************** + * (PRAM usage) + * ... ------------------------------------------------------- + * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM + * ... |<------------------- pram -------------------------->| + * ... ------------------------------------------------------- + * @END_OF_RAM: + * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose + * @CONFIG_KM_PHRAM: address for /var + * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) + * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM + */ + +/* size of rootfs in RAM */ +#define CONFIG_KM_ROOTFSSIZE 0x0 +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x100000 +/* resereved pram area at the end of memroy [hex] */ +#define CONFIG_KM_RESERVED_PRAM 0x0 +/* enable protected RAM */ +#define CONFIG_PRAM 0 + +#define CONFIG_KM_CRAMFS_ADDR 0x2000000 +#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ +#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ + +#define CONFIG_BOOTCOUNT_LIMIT + +/* + * Local Bus Definitions + */ + +/* Set the local bus clock 1/8 of plat clk, 2 clk delay LALE */ +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_2) + +/* Nand Flash */ +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull + +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#define CONFIG_BCH + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \ + | OR_FCM_BCTLD /* LBCTL not ass */ \ + | OR_FCM_SCY_1 /* 1 clk wait cycle */ \ + | OR_FCM_RST /* 1 clk read setup */ \ + | OR_FCM_PGS /* Large page size */ \ + | OR_FCM_CST) /* 0.25 command setup */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ + +/* QRIO FPGA */ +#define CONFIG_SYS_QRIO_BASE 0xfb000000 +#define CONFIG_SYS_QRIO_BASE_PHYS 0xffb000000ull + +#define CONFIG_SYS_QRIO_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE_PHYS) \ + | BR_PS_8 /* Port Size 8 bits */ \ + | BR_DECC_OFF /* no error corr */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_QRIO_OR_PRELIM (OR_AM_64KB /* length 64K */ \ + | OR_GPCM_BCTLD /* no LCTL assert */ \ + | OR_GPCM_ACS_DIV4 /* LCS 1/4 clk after */ \ + | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ + | OR_GPCM_TRLX /* relaxed tmgs */ \ + | OR_GPCM_EAD) /* extra bus clk cycles */ + +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_NUM_I2C_BUSES 3 +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ + } + +#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_BAR /* 4 byte-addressing */ +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 20000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +/* Default address of microcode for the Linux Fman driver + * env is stored at 0x100000, sector size is 0x10000, x2 (redundant) + * ucode is stored after env, so we got 0x120000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x120000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ + +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION + +/* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */ +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11 +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_PHYLIB /* recommended PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC5" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * additionnal command line configuration. + */ +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + +/* we don't need flash support */ +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_FLASH_CFI_MTD +#undef CONFIG_JFFS2_CMDLINE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#define __USB_PHY_TYPE utmi + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif + +#ifndef MTDIDS_DEFAULT +# define MTDIDS_DEFAULT "nand0=fsl_elbc_nand" +#endif /* MTDIDS_DEFAULT */ + +#ifndef MTDPARTS_DEFAULT +# define MTDPARTS_DEFAULT "mtdparts=" \ + "fsl_elbc_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" +#endif /* MTDPARTS_DEFAULT */ + +/* architecture specific default bootargs */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" + +/* FIXME: FDT_ADDR is unspecified */ +#define CONFIG_KM_DEF_ENV_CPU \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ + "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ + "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.pbl\0" \ + "update=" \ + "sf probe 0;sf erase 0 +${filesize};" \ + "sf write ${load_addr_r} 0 ${filesize};\0" \ + "" + +#define CONFIG_HW_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ + "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ + "usb_dr_mode=host\0" + +#define CONFIG_KM_NEW_ENV \ + "newenv=sf probe 0;" \ + "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ + __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" + +/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ +#ifndef CONFIG_KM_DEF_ARCH +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_DEF_ARCH \ + CONFIG_KM_NEW_ENV \ + CONFIG_HW_ENV_SETTINGS \ + "EEprom_ivm=pca9547:70:9\0" \ + "" + +#endif /* _CONFIG_KMP204X_H */ diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index 986c65f1e6..029c348285 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -227,6 +227,7 @@ /* enable I2C and select the hardware/software driver */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_NUM_I2C_BUSES 3 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 @@ -237,6 +238,7 @@ {0, {{I2C_MUX_PCA9542, 0x70, 1} } } } #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ +#define CONFIG_KM_I2C_ABORT /* * Software (bit-bang) I2C driver configuration diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h new file mode 100644 index 0000000000..4158c8dd0f --- /dev/null +++ b/include/configs/kmp204x.h @@ -0,0 +1,68 @@ +/* + * (C) Copyright 2013 Keymile AG + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* KMLION1 */ +#if defined(CONFIG_KMLION1) +#define CONFIG_HOSTNAME kmlion1 +#define CONFIG_KM_BOARD_NAME "kmlion1" + +#else +#error ("Board not supported") +#endif + +#define CONFIG_KMP204X + +#include "km/kmp204x-common.h" + +#if defined(CONFIG_KMLION1) +/* App1 Local bus */ +#define CONFIG_SYS_LBAPP1_BASE 0xD0000000 +#define CONFIG_SYS_LBAPP1_BASE_PHYS 0xFD0000000ull + +#define CONFIG_SYS_LBAPP1_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBAPP1_BASE_PHYS) \ + | BR_PS_8 /* Port Size 8 bits */ \ + | BR_DECC_OFF /* no error corr */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_LBAPP1_OR_PRELIM (OR_AM_256MB /* length 256MB */ \ + | OR_GPCM_ACS_DIV2 /* LCS 1/2 clk after */ \ + | OR_GPCM_CSNT /* LCS 1/4 clk before */ \ + | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ + | OR_GPCM_TRLX /* relaxed tmgs */ \ + | OR_GPCM_EAD) /* extra bus clk cycles */ +/* Local bus app1 Base Address */ +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM +/* Local bus app1 Options */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM + +/* App2 Local bus */ +#define CONFIG_SYS_LBAPP2_BASE 0xE0000000 +#define CONFIG_SYS_LBAPP2_BASE_PHYS 0xFE0000000ull + +#define CONFIG_SYS_LBAPP2_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBAPP2_BASE_PHYS) \ + | BR_PS_8 /* Port Size 8 bits */ \ + | BR_DECC_OFF /* no error corr */ \ + | BR_MS_GPCM /* MSEL = GPCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_LBAPP2_OR_PRELIM (OR_AM_256MB /* length 256MB */ \ + | OR_GPCM_ACS_DIV2 /* LCS 1/2 clk after */ \ + | OR_GPCM_CSNT /* LCS 1/4 clk before */ \ + | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ + | OR_GPCM_TRLX /* relaxed tmgs */ \ + | OR_GPCM_EAD) /* extra bus clk cycles */ +/* Local bus app2 Base Address */ +#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_LBAPP2_BR_PRELIM +/* Local bus app2 Options */ +#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_LBAPP2_OR_PRELIM +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/korat.h b/include/configs/korat.h index 7c7a305175..b09af199c8 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -307,7 +307,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -324,8 +323,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h index 23270e68f5..251327a227 100644 --- a/include/configs/kvme080.h +++ b/include/configs/kvme080.h @@ -86,7 +86,6 @@ #define CONFIG_NETCONSOLE #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 @@ -96,7 +95,6 @@ #define CONFIG_SYS_MEMTEST_END 0x07C00000 #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 222725cd1f..1afd487932 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -125,9 +125,8 @@ #define CONFIG_GLOBAL_TIMER #define CONFIG_SYS_CLK_FREQ (48000000) #define CONFIG_SYS_CPU_CLK (1196000000) +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (1000) -#define CONFIG_SYS_HZ CFG_HZ /* Ether */ #define CONFIG_NET_MULTI diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 1bd467f59f..fcd809dfbf 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -118,7 +118,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -306,7 +305,6 @@ /* FIXME: 32.768 MHz is the crystal frequency but */ /* the real frequency is lower by about 0.75% */ #define CONFIG_SYS_CLK_FREQ 32768000 -#define CONFIG_SYS_HZ 1000 /* Bit-field values for MCCR1. */ #define CONFIG_SYS_ROMNAL 0 diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h index 6df6f2b464..68e1a974dd 100644 --- a/include/configs/lp8x4x.h +++ b/include/configs/lp8x4x.h @@ -105,7 +105,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ @@ -117,11 +116,6 @@ #define CONFIG_AUTO_COMPLETE 1 /* - * Clock Configuration - */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 52d8377a1b..92865df12a 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -85,7 +85,6 @@ #undef CONFIG_SYS_PROMPT -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index bab71f2aec..b87df5479d 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -98,7 +98,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ @@ -111,7 +110,6 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ #ifdef CONFIG_MMC diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index a2aa56bd2d..f204587336 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -193,7 +193,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -213,8 +212,6 @@ #define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * When the watchdog is enabled, output must be fast enough in Linux. */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 96f3ba5a13..c348329cb1 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -463,7 +463,6 @@ #define CONFIG_SUPPORT_VFAT #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ @@ -482,8 +481,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h index 024d3a5aaf..8c54549fc2 100644 --- a/include/configs/m53evk.h +++ b/include/configs/m53evk.h @@ -10,7 +10,6 @@ #define CONFIG_MX53 #define CONFIG_MXC_GPIO -#define CONFIG_SYS_HZ 1000 #include <asm/arch/imx-regs.h> @@ -67,7 +66,6 @@ * U-Boot general configurations */ #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -161,10 +159,9 @@ * I2C */ #ifdef CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ #endif /* diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index a55b39b4bf..ab4a4710c7 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -99,7 +99,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h index 98bfcc5506..21b17f6e2c 100644 --- a/include/configs/manroland/mpc5200-common.h +++ b/include/configs/manroland/mpc5200-common.h @@ -143,8 +143,6 @@ /*use Hardware WDT */ #define CONFIG_HW_WATCHDOG -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index d73d2e4373..1b9e2d0f90 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -288,7 +288,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -303,8 +302,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 5e27ab2e4c..4619dfb3e4 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -303,7 +303,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Physical Memory Map diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index b48872b267..6501ea40e1 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -327,7 +327,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -343,8 +342,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 - /* * For booting Linux, the board info and command line data * have to be in the first 256 MB of memory, since this is diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index 8b1e092208..047e171100 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -235,7 +235,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -250,8 +249,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 46a8e012c8..91f6e2f8d3 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -40,7 +40,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT @@ -191,7 +190,6 @@ #endif -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0e3de777b2..aa8d59d6e9 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -399,7 +399,6 @@ /* architecture dependent code */ #define CONFIG_SYS_USR_EXCEP /* user exception */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 82f653ed5c..3d792398c5 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -17,8 +17,6 @@ #define CONFIG_MIMC200_EXT_FLASH -#define CONFIG_SYS_HZ 1000 - /* * Set up the PLL to run at 140 MHz, the CPU to run at the PLL * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 2a81849875..8071ac3808 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -368,7 +368,6 @@ extern void __led_set(led_id_t id, int state); * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -380,8 +379,6 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 2af947a231..4a8adf6f33 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -486,7 +486,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -498,7 +497,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 37cc4349f6..0308c52bc7 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -169,7 +169,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -187,8 +186,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 6875cf4c5b..de7a53a8c2 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -412,7 +412,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -421,7 +420,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index 55d93da598..6d0d392b77 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -334,7 +334,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 7e18723723..fcf237edb9 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -31,7 +31,6 @@ /* U-Boot internals */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -67,8 +66,9 @@ /* Clocks */ #define CONFIG_SYS_CLK_FREQ 24000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 /* UART */ #define CONFIG_SCIF_CONSOLE 1 diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index bc8bb8d5a7..ec8523eb95 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -38,7 +38,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -85,8 +84,9 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 /* PCMCIA */ #define CONFIG_IDE_PCMCIA 1 diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index a757737f84..54fb7c3e86 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -111,7 +110,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 #endif /* __MS7722SE_H */ diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index c4c96bfb2d..eea3bd1f2c 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -82,7 +81,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __MS7750SE_H */ diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index 8eba0228b2..87c06389b4 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -181,7 +181,6 @@ */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -196,8 +195,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/munices.h b/include/configs/munices.h index f98360d96d..3bda8ebea4 100644 --- a/include/configs/munices.h +++ b/include/configs/munices.h @@ -166,7 +166,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -176,7 +175,6 @@ #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1 #define CONFIG_CMDLINE_EDITING 1 diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index c458dd9734..721b75daee 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -35,7 +35,6 @@ /* * CLKs configurations */ -#define CONFIG_SYS_HZ 1000 /* * NS16550 Configuration diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 70d1dee6aa..c15d54631a 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -114,7 +114,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */ -/*#define CONFIG_SYS_HZ 1000 */ #define CONFIG_SYS_HZ 3686400 #define CONFIG_SYS_CPUSPEED 0x141 diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 543c4159ef..a64bafed6e 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -12,10 +12,13 @@ /* High Level Configuration Options */ #define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x81200000 #define CONFIG_MXC_GPIO +#define CONFIG_SYS_TIMER_RATE 32768 +#define CONFIG_SYS_TIMER_COUNTER \ + (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -111,10 +114,9 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE IMX_I2C_BASE -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ /* RTC */ #define CONFIG_RTC_IMXDI diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 2736e3d7dc..51b1a141eb 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -123,7 +123,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) @@ -135,8 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index d41f2cd411..8a11461123 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -137,8 +137,6 @@ /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 2f59104b83..0fb83204e3 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -40,10 +40,9 @@ /* * Hardware drivers */ -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO @@ -154,8 +153,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - /* * Physical Memory Map */ diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 0772dd23c8..8a44ef5a74 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -227,7 +227,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 04f518a22a..10c7ee9d8d 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -232,7 +232,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 7956083c35..60c40c865b 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -44,10 +44,9 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -200,7 +199,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index fe5cf3c701..623bf970e8 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -37,10 +37,9 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ /* PMIC Configs */ #define CONFIG_POWER @@ -150,7 +149,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index bd2fa43b95..ab55fbea2c 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -71,10 +71,9 @@ #define CONFIG_MXC_USB_FLAGS 0 /* I2C Configs */ -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */ /* PMIC Controller */ #define CONFIG_POWER @@ -192,7 +191,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 12b2c0de86..818d7e7f8b 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -34,10 +34,9 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */ /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -135,7 +134,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING /* Physical Memory Map */ diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index ef3058c18f..2f91a6c1d6 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -127,7 +127,6 @@ #define CONFIG_SYS_MEMTEST_END 0x10010000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 5530fc6f2b..dbbb6f0311 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -23,7 +23,8 @@ #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX -#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 @@ -36,8 +37,8 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 #endif /* __MX6QSABREAUTO_CONFIG_H */ diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index bf6113b2aa..f97a37cb1f 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -185,7 +185,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE (128 * 1024) diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 792f17cea4..7abad08c47 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -150,7 +150,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 @@ -163,7 +162,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING #define CONFIG_STACKSIZE SZ_128K diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 124dc1e6cb..363b277635 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -41,9 +41,6 @@ * CPU specifics */ -/* Ticks per second */ -#define CONFIG_SYS_HZ 1000 - /* MXS uses FDT */ #define CONFIG_OF_LIBFDT @@ -90,7 +87,6 @@ /* U-Boot general configuration */ #define CONFIG_SYS_LONGHELP #ifndef CONFIG_SYS_PROMPT -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 181a6bfd41..4d3428cb81 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -76,7 +76,6 @@ #define CONFIG_BOARD_LATE_INIT /* call board_late_init during start up */ /* timing informazion */ -#define CONFIG_SYS_HZ 1000 /* Mandatory... */ #define CONFIG_SYS_TIMERBASE 0x101E2000 /* serial port (PL011) configuration */ diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index 3f34496065..1578b010b9 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_LOW_RES_TIMER #define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE #define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ -#define CONFIG_SYS_HZ 1000 /* Always 1000 */ #define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ #define CONFIG_SYS_NIOS_TMRCNT \ (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1) @@ -120,7 +119,6 @@ * MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16 /* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3454b862a8..3df8de0138 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -30,6 +30,12 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_MV_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE #define CONFIG_CMD_FUSE #ifdef CONFIG_CMD_FUSE @@ -52,8 +58,8 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 /* OCOTP Configs */ @@ -119,7 +125,8 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX -#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 @@ -299,7 +306,6 @@ #define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 64db0eb944..4332779d25 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -426,7 +426,6 @@ int rx51_kp_getc(void); */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Stack sizes diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index f079289c5a..ce08454994 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -311,7 +311,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER @@ -332,7 +331,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_SYS_HZ 1000 /* * Various low-level settings diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 9fcd50b523..47d9902088 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -341,7 +341,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index edf6543443..3eae28884c 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -35,7 +35,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* Size of environment - 128KB */ #define CONFIG_ENV_SIZE (128 << 10) diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index e92bb68484..ac36ac6950 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -238,7 +238,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Physical Memory Map diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 42cea012da..0c096f429f 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -265,7 +265,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Physical Memory Map diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 73d5d30f01..45da2e00b2 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -236,7 +236,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 88380a42c6..46416946c7 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -217,7 +217,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index ee448bb812..3cce0de48d 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -201,7 +201,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index fc219fa478..697a3f386c 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -273,7 +273,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index a4a739e4a0..8591f98a8a 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -228,7 +228,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index c2b9e13c72..c48790d2ae 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -118,7 +118,6 @@ */ #define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */ #define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/openrisc-generic.h b/include/configs/openrisc-generic.h index ad3775e031..d4de3c3550 100644 --- a/include/configs/openrisc-generic.h +++ b/include/configs/openrisc-generic.h @@ -55,7 +55,6 @@ /* * TIMER */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_OPENRISC_TMR_HZ 100 /* @@ -101,7 +100,6 @@ * MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_PROMPT "==> " /* Command prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ #define CONFIG_SYS_MAXARGS 16 /* Max command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */ diff --git a/include/configs/origen.h b/include/configs/origen.h index da135740e4..bad34b3e71 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -102,8 +102,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 - /* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index d5eba587e4..3f4e0734ab 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -39,7 +39,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT @@ -243,7 +242,6 @@ #endif -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5f0c4fb254..91a678212d 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -144,61 +144,106 @@ #define CONFIG_SYS_L2_SIZE (512 << 10) #endif -#if CONFIG_SYS_L2_SIZE >= (512 << 10) -/* must be 32-bit */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#endif - #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_NAND #define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SPL_TEXT_BASE 0xfffff000 +#define CONFIG_SPL_TEXT_BASE 0xff800000 #define CONFIG_SPL_MAX_SIZE 4096 - -#ifdef CONFIG_SYS_INIT_L2_ADDR -/* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */ -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#define CONFIG_SPL_RELOC_TEXT_BASE \ - (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2) -#define CONFIG_SPL_RELOC_STACK \ - (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START \ - (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE) -#else -#define CONFIG_SYS_TEXT_BASE 0x00201000 -#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 -#define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#endif - -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif /* not CONFIG_TPL_BUILD */ + +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -526,6 +571,40 @@ #define CONFIG_VSC7385_IMAGE_SIZE 8192 #endif +/* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) +#else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif /* CONFIG_TPL_BUILD */ +#endif +#endif + /* Serial Port - controlled on board with jumper J8 * open - index 2 * shorted - index 1 @@ -536,7 +615,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -733,7 +812,7 @@ /* * Environment */ -#ifdef CONFIG_RAMBOOT_SPIFLASH +#ifdef CONFIG_SPIFLASH #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 @@ -742,15 +821,20 @@ #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_RAMBOOT_SDCARD) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SYS_MMC_ENV_DEV 0 #elif defined(CONFIG_NAND) -#define CONFIG_ENV_IS_IN_NAND +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#else #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ @@ -824,7 +908,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -834,7 +917,6 @@ /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 4aa706422e..76189e136f 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -472,7 +472,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -482,7 +481,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 8157f47cce..a210e293a9 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -269,7 +269,6 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -284,8 +283,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index f6cb813bc8..3fde7ca3a3 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -197,7 +197,6 @@ * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -213,8 +212,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 03020902bb..84bc9ed813 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -104,8 +104,6 @@ #define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " -#else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index d838356366..661101ccb6 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -106,8 +106,6 @@ #define CONFIG_SYS_LONGHELP #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " -#else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index 2ab6fd2e8a..adf85190d1 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -107,7 +107,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ @@ -120,7 +119,6 @@ * Clock Configuration */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index cab9192de3..e929b23f28 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -66,8 +66,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h index 423e2fa6db..5c6188955d 100644 --- a/include/configs/pcm030.h +++ b/include/configs/pcm030.h @@ -364,7 +364,6 @@ RTC configuration #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_DISPLAY_BOARDINFO 1 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 2fff0beffa..4970b13e96 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -155,7 +155,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_CONS_INDEX 1 /* NS16550 Configuration */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 7cf22ba763..400cb3e826 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -276,7 +276,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -293,8 +292,6 @@ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_LYNXKDI 1 /* support kdi files */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index d31c137967..266d107e44 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -402,7 +402,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -417,7 +416,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Decrementer freq: 1ms ticks */ -#define CONFIG_SYS_HZ 1000 /* * For booting Linux, the board info and command line data diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h index bb3351812e..327be3fde9 100644 --- a/include/configs/pf5200.h +++ b/include/configs/pf5200.h @@ -239,7 +239,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -254,8 +253,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 792f4cd418..fc95cf0bfa 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index ff379a54b0..533e249a7c 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index f15ae6dd7f..e0c388e70c 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -31,7 +31,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x73f00000 #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 3f9fdd444d..18f9a6cc20 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -272,7 +272,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00040000 #define CONFIG_SYS_MEMTEST_END 0x00040100 #define CONFIG_SYS_PBSIZE 1024 -#define CONFIG_SYS_PROMPT "=> " /* @@ -363,7 +362,6 @@ */ #define CONFIG_SYS_BUS_CLK CONFIG_BUS_CLK -#define CONFIG_SYS_HZ 1000 /* diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 752321c2fb..760dcaca4b 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -267,7 +267,6 @@ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* @@ -315,7 +314,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x140000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ /* the exception vector table */ diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 5ea7e67da5..84ad006acd 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -211,7 +211,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ @@ -224,7 +223,6 @@ #define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ #define RTC 1 /* enable 32KHz osc */ diff --git a/include/configs/qemu-malta.h b/include/configs/qemu-malta.h index 4e7ad33230..03514d165b 100644 --- a/include/configs/qemu-malta.h +++ b/include/configs/qemu-malta.h @@ -25,7 +25,6 @@ */ #define CONFIG_SYS_MHZ 250 /* arbitrary value */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */ #define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index c3a69c5327..dd3babb505 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -106,8 +106,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 - /* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 7267a8115e..a1422fca11 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -108,8 +108,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_HZ 1000 - /* Cached addr */ #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 diff --git a/include/configs/qong.h b/include/configs/qong.h index ee2ff7f043..f9d6642cc4 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -174,7 +174,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -189,8 +188,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index e0925f6934..7b04e0c3e3 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -106,7 +106,6 @@ * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -122,8 +121,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 73156498ff..f3540c1421 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -109,7 +109,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -124,8 +123,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h index 080448090d..dd26a71bcb 100644 --- a/include/configs/r0p7734.h +++ b/include/configs/r0p7734.h @@ -73,7 +73,6 @@ /* undef to save memory */ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " /* Buffer size for input from the Console */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for Console output */ @@ -164,7 +163,8 @@ #else #define CONFIG_SYS_CLK_FREQ 44444444 #endif +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __R0P7734_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 65dcffb29b..ddcc975874 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0FFC0000 #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -77,8 +76,9 @@ * SuperH Clock setting */ #define CONFIG_SYS_CLK_FREQ 60000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index dd1caf18bc..f5e4daab8f 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -102,8 +101,9 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 /* PCI Controller */ #if defined(CONFIG_CMD_PCI) diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index 216c6cb70b..0b7add7bea 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -30,9 +30,6 @@ */ #define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 -/* Timer */ -#define CONFIG_SYS_HZ 1000 - /* Memory layout */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x00000000 diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 2743c9afe0..f144f84320 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -128,7 +128,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -143,8 +142,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index d7473c3e62..acee4e8985 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -40,7 +40,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0C7C0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -85,6 +84,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h index 783467af5e..a5dbb64f48 100644 --- a/include/configs/rsk7264.h +++ b/include/configs/rsk7264.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -65,6 +64,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 36000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h index 11c2a93c1a..9f54160afb 100644 --- a/include/configs/rsk7269.h +++ b/include/configs/rsk7269.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Boot Argument Buffer Size */ #define CONFIG_SYS_PBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ @@ -64,6 +63,8 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 66125000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index c303244f98..0590d201ce 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -173,8 +173,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) -#define CONFIG_SYS_HZ 1000 - /* Goni has 3 banks of DRAM, but swap the bank */ #define CONFIG_NR_DRAM_BANKS 3 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 97a4008e36..d9e4c5683f 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -198,8 +198,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) -#define CONFIG_SYS_HZ 1000 - /* Universal has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 033c1f30de..3750ad2c3d 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -475,7 +475,6 @@ #define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT "=> " #undef CONFIG_SYS_HUSH_PARSER #ifdef CONFIG_SYS_HUSH_PARSER @@ -584,7 +583,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_ALT_MEMTEST /* Select full-featured memory test */ #define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 924d7fabac..5a6f0fc708 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -20,7 +20,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 4027030384..0884ad3a02 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -16,6 +16,8 @@ #endif +#define CONFIG_SYS_TIMER_RATE 1000000 + #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT @@ -44,12 +46,15 @@ #define CONFIG_SANDBOX_GPIO #define CONFIG_SANDBOX_GPIO_COUNT 20 +#define CONFIG_CMD_GPT +#define CONFIG_PARTITION_UUIDS +#define CONFIG_EFI_PARTITION + /* * Size of malloc() pool, although we don't actually use this yet. */ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ -#define CONFIG_SYS_PROMPT "=>" /* Command Prompt */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_LONGHELP /* #undef to save memory */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -66,8 +71,6 @@ #define CONFIG_ENV_SIZE 8192 #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SYS_HZ 1000 - /* Memory things - we don't really want a memory test */ #define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 3cf693bdc9..cbcd4e16b2 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -26,7 +26,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index a139590be8..2fd1dc48e4 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -113,7 +113,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -146,8 +145,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_info (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 63ee4537d6..a258fe83dd 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -438,7 +438,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -451,7 +450,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 84be5246b9..6d970608f2 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -557,7 +557,6 @@ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -566,7 +565,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index a489bb1211..dba948a5ce 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -496,7 +496,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -507,7 +506,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 60710ba829..9a11150592 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -224,8 +224,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /*----------------------------------------------------------------------- * IIC stuff *----------------------------------------------------------------------- diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h index fb4dc6fde4..ebdc5c8b05 100644 --- a/include/configs/sh7752evb.h +++ b/include/configs/sh7752evb.h @@ -51,7 +51,6 @@ #define SH7752EVB_SDRAM_SIZE (512 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -132,6 +131,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __SH7752EVB_H */ diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h index af76f49dd2..ce1add2689 100644 --- a/include/configs/sh7757lcr.h +++ b/include/configs/sh7757lcr.h @@ -51,7 +51,6 @@ #define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024) #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -140,6 +139,7 @@ /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 48000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __SH7757LCR_H */ diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index c1d33d87ba..a13778830a 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -43,7 +43,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -98,8 +97,9 @@ /* Clock */ #define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CONFIG_SYS_HZ 1000 /* Ether */ #define CONFIG_SH_ETHER 1 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index 04f1d2284e..4acbcab1b2 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -65,7 +65,6 @@ #endif #define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE 256 #define CONFIG_SYS_MAXARGS 16 @@ -172,7 +171,8 @@ /* Board Clock */ /* The SCIF used external clock. system clock only used timer. */ #define CONFIG_SYS_CLK_FREQ 50000000 +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 #endif /* __SH7785LCR_H */ diff --git a/include/configs/shmin.h b/include/configs/shmin.h index 5fb71760f8..5c990fc96d 100644 --- a/include/configs/shmin.h +++ b/include/configs/shmin.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_TEXT_BASE 0x8DFB0000 #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ @@ -103,8 +102,9 @@ #else #define CONFIG_SYS_CLK_FREQ 33333333 #endif /* CONFIG_T_SH7706LSR */ +#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ #define CONFIG_SYS_TMU_CLK_DIV 4 -#define CONFIG_SYS_HZ 1000 /* Network device */ #define CONFIG_DRIVER_NE2000 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 5426ee8720..9eb0a04da6 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -85,7 +85,6 @@ + (8 * 1024 * 1024)) #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -113,7 +112,6 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index b787270670..a87444e0b1 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x30800000 -#define CONFIG_SYS_HZ 1000 - /* support additional compression methods */ #define CONFIG_BZIP2 #define CONFIG_LZO diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 507a5d309e..c9a2e1568f 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -166,8 +166,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5e00000) #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_HZ 1000 - /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 0496661b20..e2e8efe58c 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -101,8 +101,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) -#define CONFIG_SYS_HZ 1000 - /* SMDKV310 has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index c5de89e1f8..5436bae15e 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -20,7 +20,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_HZ 1000 /* CPU */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/snowball.h b/include/configs/snowball.h index edc426aa0d..00d6fa5e89 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -27,7 +27,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000 /* must be 1000 */ /*----------------------------------------------------------------------- * Size of environment and malloc() pool diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 346ca72327..980636c93b 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -196,12 +196,12 @@ /* reload value when timer count to zero */ #define TIMER_LOAD_VAL 0xFFFFFFFF /* Timer info */ -#define CONFIG_SYS_HZ 1000 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET -#define CONFIG_TIMER_CLOCK_KHZ 2400 +#define CONFIG_SYS_TIMER_RATE 2400000 #else -#define CONFIG_TIMER_CLOCK_KHZ 25000 +#define CONFIG_SYS_TIMER_RATE 25000000 #endif +#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 5250d47166..b6fbe23706 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -343,7 +343,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -354,7 +353,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buf Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index a5b3b781ae..127de000f0 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -95,7 +95,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER #if defined(CONFIG_CMD_KGDB) @@ -110,8 +109,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 } /* diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index c11c2b4d05..23f7ad77b6 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -47,7 +47,6 @@ #define CONFIG_I2C_CHIPADDRESS 0x50 /* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ 1000 /* Flash configuration */ #if defined(CONFIG_FLASH_PNOR) diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 231263f2b5..07668de4d9 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -384,7 +384,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -402,8 +401,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h index 95fc26ba9b..248e657e4c 100644 --- a/include/configs/stamp9g20.h +++ b/include/configs/stamp9g20.h @@ -35,7 +35,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* 1ms resolution */ /* misc settings */ #define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 100dae742e..9b3f0cc69f 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -331,7 +331,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index e82a4b1c6f..805814f4fb 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -366,7 +366,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index ead67453b9..4e3b7277f4 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -132,8 +132,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index a6c1f9927b..b4aa948565 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -140,7 +140,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_SYS_HUSH_PARSER #endif @@ -159,8 +158,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 3e82fc2558..3f54f1423e 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -284,7 +284,6 @@ #define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #ifdef CONFIG_CMD_KGDB #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -293,7 +292,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 60dd8ff11a..683bc54a2c 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -169,7 +169,6 @@ */ #define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* * Physical Memory Map diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h index 132e299167..2901ed1eeb 100644 --- a/include/configs/tb0229.h +++ b/include/configs/tb0229.h @@ -109,8 +109,6 @@ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4) -#define CONFIG_SYS_HZ 1000 - #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index ba6c6bb9f5..522cd4133d 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -19,6 +19,9 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ +#define CONFIG_SYS_TIMER_RATE 1000000 +#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE + /* * Display CPU and Board information */ @@ -109,8 +112,6 @@ #define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) -#define CONFIG_SYS_HZ 1000 - /*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 2fc2c10676..ba16b1c14b 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -122,7 +122,6 @@ + PHYS_DRAM_1_SIZE - (8 << 12)) #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_OMAP_GPIO #define CONFIG_MMC @@ -149,7 +148,6 @@ */ #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index e90490c750..b8c0d54ab3 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -60,7 +60,6 @@ #undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_CMD_ASKEN #define CONFIG_CMD_ECHO diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 13ed875135..84269ad262 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -56,7 +56,6 @@ /* Timer information. */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* I2C IP block */ #define CONFIG_I2C diff --git a/include/configs/titanium.h b/include/configs/titanium.h index 077e25e16e..0bb6731a26 100644 --- a/include/configs/titanium.h +++ b/include/configs/titanium.h @@ -41,8 +41,8 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000 /* MMC Configs */ @@ -194,7 +194,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 27efa69abc..48fcb24c4f 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) -#define CONFIG_SYS_HZ 1000 #define CONFIG_PLL_SYS_EXT_FREQ 25000000 #define CONFIG_PLL_TDM_EXT_FREQ 19200000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index f841ba828b..32f6b00bbf 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -40,7 +40,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 159a8bca10..a96a9cb416 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -51,7 +51,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ -#define CONFIG_SYS_HZ 1000 /* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/trats.h b/include/configs/trats.h index 24ea06b927..3d080c4d19 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -49,8 +49,9 @@ #define MACH_TYPE_TRATS 3928 #define CONFIG_MACH_TYPE MACH_TYPE_TRATS +#include <asm/sizes.h> /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (16 << 20)) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M)) /* select serial console configuration */ #define CONFIG_SERIAL2 /* use SERIAL 2 */ @@ -91,12 +92,20 @@ /* USB Composite download gadget - g_dnl */ #define CONFIG_USBDOWNLOAD_GADGET + +/* TIZEN THOR downloader support */ +#define CONFIG_CMD_THOR_DOWNLOAD +#define CONFIG_THOR_FUNCTION + +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M #define CONFIG_DFU_FUNCTION #define CONFIG_DFU_MMC /* USB Samsung's IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 #define CONFIG_G_DNL_PRODUCT_NUM 0x6601 +#define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D #define CONFIG_G_DNL_MANUFACTURER "Samsung" #define CONFIG_BOOTDELAY 1 @@ -131,7 +140,8 @@ #define CONFIG_DFU_ALT \ "u-boot mmc 80 400;" \ "uImage ext4 0 2;" \ - "exynos4210-trats.dtb ext4 0 2\0" + "exynos4210-trats.dtb ext4 0 2;" \ + ""PARTS_ROOT" part 0 5\0" #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -218,8 +228,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) -#define CONFIG_SYS_HZ 1000 - /* TRATS has 4 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ @@ -313,9 +321,7 @@ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12)) #define CONFIG_CMD_USB_MASS_STORAGE -#if defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_GADGET_MASS_STORAGE -#endif /* Pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index ac9a1dd2b7..d57394e550 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -306,7 +306,6 @@ */ #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index 885b3eeddc..0615117773 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -137,7 +137,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ #else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ @@ -150,7 +149,6 @@ #define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ #ifdef CONFIG_MMC diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 5942bdf21d..0937653fc2 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -239,8 +239,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_HZ 1000 - #define CONFIG_CMDLINE_EDITING /* MMC boot support */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 6910036492..5ac6e6441c 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -15,7 +15,9 @@ */ #define CONFIG_MX25 #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TIMER_RATE CONFIG_MX25_CLK32 +#define CONFIG_SYS_TIMER_COUNTER \ + (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ @@ -110,7 +112,6 @@ #define CONFIG_SYS_NAND_LARGEPAGE /* U-Boot general configuration */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Print buffer sz */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 0c97ab1894..45d33a6896 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF -#define CONFIG_SYS_HZ 1000 /* must be 1000 */ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/uc100.h b/include/configs/uc100.h index faae7ffd26..cad897f70b 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -141,7 +141,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if 0 #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -161,8 +160,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ /* diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 8f4a4702ac..8e6e246460 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -107,7 +107,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ @@ -209,7 +208,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" *------------------------------------------------------------------*/ #define CONFIG_SYS_CLK_FREQ 33000000 -#define CONFIG_SYS_HZ 1000 /*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */ /*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */ diff --git a/include/configs/v37.h b/include/configs/v37.h index 0fa55d6f3a..0d01fe207e 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -110,7 +110,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -125,8 +124,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 501010eb9c..0c544350eb 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -244,7 +244,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -259,8 +258,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if defined(CONFIG_CMD_KGDB) # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 85a6c11137..99831169a3 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -28,7 +28,6 @@ #define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) -#define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 5527511df2..5cf4ae5be8 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -345,13 +345,11 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */ -#define CONFIG_SYS_HZ 1000 /* 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 36daeb34a0..10738ac24b 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -25,12 +25,11 @@ #define CONFIG_SYS_MEMTEST_START 0x100000 #define CONFIG_SYS_MEMTEST_END 0x10000000 -#define CONFIG_SYS_HZ (1000000 / 256) -#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ -#define CONFIG_SYS_TIMER_INTERVAL 10000 -#define CONFIG_SYS_TIMER_RELOAD (CONFIG_SYS_TIMER_INTERVAL >> 4) -#define CONFIG_SYS_TIMER_CTRL 0x84 /* Enable, Clock / 16 */ +#define CONFIG_SYS_TIMERBASE 0x101E2000 /* Timer 0 and 1 base */ +#define CONFIG_SYS_TIMER_RATE (1000000 / 256) +#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) +#define CONFIG_SYS_TIMER_COUNTS_DOWN /* * control registers diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 5598961aa7..6da5e8f5db 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END 0x20000000 -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -132,6 +131,10 @@ #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) +#define CONFIG_SYS_TIMER_RATE 1000000 +#define CONFIG_SYS_TIMER_COUNTER (0x10011000 + 0x4) +#define CONFIG_SYS_TIMER_COUNTS_DOWN + /* SMSC9115 Ethernet from SMSC9118 family */ #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_32_BIT 1 diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 5a7a066377..8d0a00dcd9 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -70,10 +70,9 @@ /* I2C Configs */ #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C0_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_BOOTDELAY 3 @@ -171,7 +170,6 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "=> " #undef CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE \ @@ -184,7 +182,6 @@ #define CONFIG_SYS_MEMTEST_END 0x87C00000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 /* * Stack sizes diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index cf88d68ea1..0457cdfcf0 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -120,7 +120,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ @@ -139,8 +138,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 4744d7cb68..6891bf8b15 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -157,7 +157,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index f5d856493c..1489080041 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -199,7 +199,6 @@ /* clocks */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ #define MHZ180 diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index d5666227e3..734d13f005 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -386,7 +386,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -397,7 +396,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index ba92db3de6..c3ac612a8c 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -136,7 +136,6 @@ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else -#define CONFIG_SYS_PROMPT "=> " #endif #define CONFIG_SYS_CBSIZE 256 #define CONFIG_SYS_PBSIZE \ @@ -150,7 +149,6 @@ /* * Clock Configuration */ -#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 442a9841ca..e9c7e64bef 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -196,7 +196,6 @@ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 256 @@ -206,7 +205,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index 5c442ad865..695bc230c0 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -45,10 +45,9 @@ /* * Hardware drivers */ -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MXC -#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR -#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO @@ -152,9 +151,6 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - - /* * Stack sizes * diff --git a/include/configs/x600.h b/include/configs/x600.h index 89cd501644..39540e3806 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -20,7 +20,6 @@ #include <asm/arch/hardware.h> /* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_HZ_CLOCK 8300000 #define CONFIG_SYS_TEXT_BASE 0x00800040 diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 5f34fc7694..431ed96e29 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -116,7 +116,6 @@ #define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */ /* diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index f4f42c510d..0ccd73a868 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -64,7 +64,6 @@ /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING /* add command line history */ #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ diff --git a/include/configs/xpedite1000.h b/include/configs/xpedite1000.h index a1dea657af..eb193f8673 100644 --- a/include/configs/xpedite1000.h +++ b/include/configs/xpedite1000.h @@ -209,12 +209,10 @@ extern void out32(unsigned int, unsigned long); */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 97ce3eb542..4738c23350 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -556,12 +556,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ #define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 372135a89f..33428803eb 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -337,12 +337,10 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 31330eaa30..9da845d9a2 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -411,12 +411,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 340d4be4c6..4137cc9208 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -396,12 +396,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 237fcb1512..9d58738ce8 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -122,7 +122,6 @@ * Miscellaneous configurable options *----------------------------------------------------------------------*/ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -138,8 +137,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 69aafa74cd..52a745e604 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -128,8 +128,6 @@ unsigned char zipitz2_spi_read(void); #define CONFIG_SYS_LONGHELP /* undef to save memory */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #endif #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 765b849e25..8ffe6f1e08 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -10,11 +10,16 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/arch/imx-regs.h> + #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_MX25 -#define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0xA0000000 +#define CONFIG_SYS_TIMER_RATE 32768 +#define CONFIG_SYS_TIMER_COUNTER \ + (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) + #define CONFIG_MACH_TYPE MACH_TYPE_ZMX25 /* * Environment settings diff --git a/include/configs/zynq.h b/include/configs/zynq.h index b9f381f645..4c6e6e8f6a 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -12,7 +12,6 @@ /* CPU clock */ #define CONFIG_CPU_FREQ_HZ 800000000 -#define CONFIG_SYS_HZ 1000 /* Ram */ #define CONFIG_NR_DRAM_BANKS 1 |
