diff options
Diffstat (limited to 'include/configs')
87 files changed, 1145 insertions, 613 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 9fb5cee711..bcbae5099a 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -924,8 +924,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index d0e5a2565a..89907dce4b 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -722,8 +722,4 @@ combinations. this should be removed later #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 05ba13b96e..826de5bd3b 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -267,7 +267,7 @@ #endif #if defined(CONFIG_SERIAL_BOOT) -#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) #else #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) #endif diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 8160b28f78..f8aef2e830 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -1,9 +1,7 @@ /* * Copyright 2007-2011 Freescale Semiconductor, Inc. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. + * SPDX-License-Identifier: GPL-2.0 */ /* diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index f9776c0333..3c0faca134 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -952,8 +952,4 @@ extern unsigned long get_sdram_size(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index b2e51b5b2f..f250e7f88e 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -756,8 +756,4 @@ unsigned long get_board_sys_clk(unsigned long dummy); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 951cbc4f57..e5df784ece 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -39,6 +39,8 @@ #define CONFIG_BOARD_EARLY_INIT_F #endif +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg @@ -936,8 +938,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL #endif +#include <asm/fsl_secure_boot.h> + #endif /* __T1024QDS_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 4a0f5b2524..3cda3b1afd 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -33,6 +33,8 @@ #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + /* support deep sleep */ #ifdef CONFIG_PPC_T1024 #define CONFIG_DEEP_SLEEP @@ -948,8 +950,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL #endif +#include <asm/fsl_secure_boot.h> + #endif /* __T1024RDB_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 9e151da16a..2e7892f94a 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -835,9 +835,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index da65f567ea..5fc34976d7 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -938,9 +938,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#endif #endif /* __CONFIG_H */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index a0cecc60cd..a56208c6a6 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -933,10 +933,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#undef CONFIG_CMD_USB -#endif #endif /* __T208xQDS_H */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 312b0eb91f..b5290a1a16 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -889,10 +889,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTCOMMAND CONFIG_LINUX -#ifdef CONFIG_SECURE_BOOT #include <asm/fsl_secure_boot.h> -#define CONFIG_CMD_BLOB -#undef CONFIG_CMD_USB -#endif #endif /* __T2080RDB_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 1b94f6436c..91857d6997 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -644,8 +644,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 73279c899e..c1a0a6ced9 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -606,6 +606,16 @@ unsigned long get_board_ddr_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 +#define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" +#ifndef CONFIG_SPL_BUILD +#define CONFIG_VID +#endif +#define CONFIG_VOL_MONITOR_IR36021_SET +#define CONFIG_VOL_MONITOR_IR36021_READ +/* The lowest and highest voltage allowed for T4240RDB */ +#define VDD_MV_MIN 819 +#define VDD_MV_MAX 1212 + /* * eSPI - Enhanced SPI */ @@ -837,13 +847,4 @@ unsigned long get_board_ddr_clk(void); #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -/* Secure Boot target was not getting build for T4240 because of - * increased binary size. So the size is being reduced by removing USB - * which is anyways not used in Secure Environment. - */ -#undef CONFIG_CMD_USB -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index c51db8c5c3..6ebe0b3866 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -18,10 +18,6 @@ #include <configs/ti_am335x_common.h> -/* Don't override the distro default bootdelay */ -#undef CONFIG_BOOTDELAY -#include <config_distro_defaults.h> - #ifndef CONFIG_SPL_BUILD #ifndef CONFIG_FIT # define CONFIG_FIT @@ -361,6 +357,7 @@ */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_MMC +#undef CONFIG_TIMER #endif #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index aac550a477..c3867efe9a 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -142,6 +142,9 @@ */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_MMC +#undef CONFIG_DM_SPI +#undef CONFIG_DM_SPI_FLASH +#undef CONFIG_TIMER #endif #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 5b8b22f0e6..bb2abf1a42 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -29,6 +29,9 @@ #define CONFIG_HOSTNAME bamboo #include "amcc-common.h" +/* Reclaim some space. */ +#undef CONFIG_SYS_LONGHELP + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ /* diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 3bed9a4f0e..89c7446d26 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -1,17 +1,7 @@ /* * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index c26a25cb22..fc2dc5a67d 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -1,17 +1,7 @@ /* * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H diff --git a/include/configs/chromebook_jerry.h b/include/configs/chromebook_jerry.h index e29d77695b..67f45c0f90 100644 --- a/include/configs/chromebook_jerry.h +++ b/include/configs/chromebook_jerry.h @@ -7,6 +7,11 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + #include <configs/rk3288_common.h> #define CONFIG_ENV_IS_NOWHERE @@ -15,4 +20,17 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE +#define CONFIG_CMD_SF_TEST +#define CONFIG_CMD_TIME + +#undef CONFIG_SPL_GPIO_SUPPORT + +#define CONFIG_KEYBOARD + +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + #endif diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h new file mode 100644 index 0000000000..f0de827fd2 --- /dev/null +++ b/include/configs/clearfog.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2015 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_CLEARFOG_H +#define _CONFIG_CLEARFOG_H + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#define CONFIG_CMD_TIME + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#define CONFIG_SPI_FLASH_STMICRO + +/* + * SDIO/MMC Card Configuration + */ +#define CONFIG_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_GENERIC_MMC +#define CONFIG_SDHCI +#define CONFIG_MV_SDHCI +#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE + +/* Partition support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI + +#define CONFIG_ENV_MIN_ENTRIES 128 + +/* Environment in MMC */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SECT_SIZE 0x200 +#define CONFIG_ENV_SIZE 0x10000 +/* + * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC + * boot image starts @ LBA-0. + * As result in MMC/eMMC case it will be a 1 sector gap between u-boot + * image and environment + */ +#define CONFIG_ENV_OFFSET 0xf0000 +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#endif + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define SPL_BOOT_SDIO_MMC_CARD 2 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD + +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_SIZE (140 << 10) +#define CONFIG_SPL_TEXT_BASE 0x40000030 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +/* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\ + + 1) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ +#endif +#endif + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#endif /* _CONFIG_CLEARFOG_H */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 708c79af97..5aed3a5fcd 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -36,7 +36,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART0_BASE /* Allow to overwrite serial and ethaddr */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index aef37dd670..a099eee047 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -765,8 +765,4 @@ #include <asm/fsl_secure_boot.h> -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 944e82f55f..fdfda6b903 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -1,17 +1,7 @@ /* * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 3673e5e368..ef14132b89 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -10,15 +10,7 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ -#define CONFIG_ARMADA_38X -#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ -#define CONFIG_SYS_L2_PL310 - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#endif #define CONFIG_DISPLAY_BOARDINFO_LATE /* @@ -99,16 +91,15 @@ #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_ADDR { 1, 0 } -#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ /* PCIe support */ +#ifndef CONFIG_SPL_BUILD #define CONFIG_PCI #define CONFIG_PCI_MVEBU #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_E1000 /* enable Intel E1000 support for testing */ +#endif #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST @@ -139,9 +130,9 @@ #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) @@ -158,7 +149,7 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS #endif @@ -176,10 +167,6 @@ #endif #endif -/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_A38X -#define CONFIG_DDR3 - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index ab6e5a5bce..c8b0344185 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -10,12 +10,8 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ #define CONFIG_DB_784MP_GP /* Board target name for DDR training */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#endif #define CONFIG_DISPLAY_BOARDINFO_LATE /* @@ -30,13 +26,18 @@ * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE #define CONFIG_CMD_NAND #define CONFIG_CMD_PCI #define CONFIG_CMD_PING +#define CONFIG_CMD_SATA #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_TFTPPUT @@ -64,48 +65,29 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_ADDR { 0x10, 0x11, 0x12, 0x13 } -#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ -#define CONFIG_RESET_PHY_R #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST /* SATA support */ -#ifdef CONFIG_CMD_IDE -#define __io -#define CONFIG_IDE_PREINIT -#define CONFIG_MVSATA_IDE - -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO - -#define CONFIG_SYS_ATA_REG_OFFSET 0x0100 /* Offset for register access */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0100 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/* CONFIG_CMD_IDE requires some #defines for ATA registers */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IDE_MAXBUS - -/* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR MVEBU_AXP_SATA_BASE -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x2000 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x4000 - +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA_MV +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_EFI_PARTITION #define CONFIG_DOS_PARTITION -#endif /* CONFIG_CMD_IDE */ + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT /* PCIe support */ +#ifndef CONFIG_SPL_BUILD #define CONFIG_PCI #define CONFIG_PCI_MVEBU #define CONFIG_PCI_PNP #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_E1000 /* enable Intel E1000 support for testing */ +#endif /* NAND */ #define CONFIG_SYS_NAND_USE_FLASH_BBT @@ -139,9 +121,9 @@ #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) @@ -161,7 +143,7 @@ #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_SPD_EEPROM 0x4e +#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 3be44d4086..817676f182 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -147,6 +147,11 @@ #define CONFIG_FLASH_CFI_DRIVER 1 /* The following #defines are needed to get flash environment right */ +/* ROM version */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 +/* RAM version */ +/* #define CONFIG_SYS_TEXT_BASE 0x80100000 */ + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index d89e661b6b..99d9148611 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -33,7 +33,7 @@ #define CONFIG_SYS_MALLOC_LEN SZ_1M #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_64M -#define CONFIG_SYS_TEXT_BASE 0x83FA0000 +#define CONFIG_SYS_TEXT_BASE 0x83F00000 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M) @@ -49,6 +49,13 @@ #define CONFIG_BAUDRATE 115200 /* + * DMA + */ +#if !defined(CONFIG_SPL_BUILD) +#define CONFIG_DMA_LPC32XX +#endif + +/* * I2C */ #define CONFIG_SYS_I2C @@ -114,9 +121,19 @@ #define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE #define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_NAND /* + * USB + */ +#define CONFIG_USB_OHCI_LPC32XX +#define CONFIG_USB_ISP1301_I2C_ADDR 0x2d +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_USB + +/* * U-Boot General Configurations */ #define CONFIG_SYS_LONGHELP diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 81070b1fd0..9d62421050 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -142,6 +142,11 @@ #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 #define CONFIG_QSPI_QUAD_SUPPORT +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_DM_SPI +#undef CONFIG_DM_SPI_FLASH +#endif + /* * Default to using SPI for environment, etc. * 0x000000 - 0x010000 : QSPI.SPL (64KiB) diff --git a/include/configs/ds414.h b/include/configs/ds414.h new file mode 100644 index 0000000000..e3c7087a1f --- /dev/null +++ b/include/configs/ds414.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_SYNOLOGY_DS414_H +#define _CONFIG_SYNOLOGY_DS414_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#define CONFIG_CMD_TIME +#define CONFIG_CMD_USB + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 1000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x7E0000 /* RedBoot config partition in DTS */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define CONFIG_PHY_ADDR { 0x1, 0x0 } +#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII + +#define CONFIG_SYS_ALT_MEMTEST + +/* PCIe support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PCI_ENUM +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_SCAN_SHOW +#endif + +/* USB/EHCI/XHCI configuration */ + +#define CONFIG_DM_USB +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* FIXME: broken XHCI support + * Below defines should enable support for the two rear USB3 ports. Sadly, this + * does not work because: + * - xhci-pci seems to not support DM_USB, so with that enabled it is not + * found. + * - USB init fails, controller does not respond in time */ +#if 0 +#undef CONFIG_DM_USB +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_PCI +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#endif + +#if !defined(CONFIG_USB_XHCI) +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MARVELL +#define CONFIG_EHCI_IS_TDI +#endif + +/* why is this only defined in mv-common.h if CONFIG_DM is undefined? */ +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION +#define CONFIG_SUPPORT_VFAT +#define CONFIG_SYS_MVFS + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 + +/* DS414 bus width is 32bits */ +#define CONFIG_DDR_32BIT + +/* Use random ethernet address if not configured */ +#define CONFIG_LIB_RAND +#define CONFIG_NET_RANDOM_ETHADDR + +/* Default Environment */ +#define CONFIG_BOOTCOMMAND "sf read ${loadaddr} 0xd0000 0x700000; bootm" +#define CONFIG_BOOTARGS "console=ttyS0,115200" +#define CONFIG_LOADADDR 0x80000 +#undef CONFIG_PREBOOT /* override preboot for USB and SPI flash init */ +#define CONFIG_PREBOOT "usb start; sf probe" + +#endif /* _CONFIG_SYNOLOGY_DS414_H */ diff --git a/include/configs/firefly-rk3288.h b/include/configs/firefly-rk3288.h index 4c5c4ddefd..a29f55709d 100644 --- a/include/configs/firefly-rk3288.h +++ b/include/configs/firefly-rk3288.h @@ -7,6 +7,11 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + #include <configs/rk3288_common.h> #define CONFIG_SPL_MMC_SUPPORT @@ -19,4 +24,7 @@ */ #define CONFIG_ENV_OFFSET (96 * 1024) +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + #endif diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h deleted file mode 100644 index fa32a2e8cf..0000000000 --- a/include/configs/fx12mm.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec, - * see http://www.em.avnet.com - */ - -#ifndef __CONFIG_FX12_H -#define __CONFIG_FX12_H - -#include "../board/avnet/fx12mm/xparameters.h" - -/* cmd config */ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD - -/* sdram */ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/* environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_SYS_ENV_OFFSET 0xA0000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) -#define CONFIG_ENV_OVERWRITE 1 - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and running;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (4*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 -#define MTDIDS_DEFAULT "nor0=fx12mm-flash" -#define MTDPARTS_DEFAULT "mtdparts=fx12mm-flash:-(user)" - -#include "configs/xilinx-ppc405.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 43ce7fe25f..68d3fd7384 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -34,6 +34,7 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */ #if defined(CONFIG_SPL_NAND_SUPPORT) diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 8663c1772a..8bc89a05eb 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -20,6 +20,9 @@ #define CONFIG_IDENT_STRING " iocon 0.06" #include "amcc-common.h" +/* Reclaim some space. */ +#undef CONFIG_SYS_LONGHELP + #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT diff --git a/include/configs/kylin_rk3036.h b/include/configs/kylin_rk3036.h index aa07889ff2..b16c03fc0a 100644 --- a/include/configs/kylin_rk3036.h +++ b/include/configs/kylin_rk3036.h @@ -7,6 +7,50 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <linux/sizes.h> #include <configs/rk3036_common.h> +#ifndef CONFIG_SPL_BUILD + +/* Store env in emmc */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE SZ_32K +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* emmc */ +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ +#define CONFIG_ENV_OFFSET (SZ_4M - SZ_64K) /* reserved area */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +/* Enable gpt partition table */ +#define CONFIG_CMD_GPT +#define CONFIG_RANDOM_UUID +#define CONFIG_EFI_PARTITION +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=loader,start=32K,size=4000K,uuid=${uuid_gpt_loader};" \ + "name=reserved,size=64K,uuid=${uuid_gpt_reserved};" \ + "name=misc,size=4M,uuid=${uuid_gpt_misc};" \ + "name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \ + "name=boot_a,size=32M,uuid=${uuid_gpt_boot_a};" \ + "name=boot_b,size=32M,uuid=${uuid_gpt_boot_b};" \ + "name=system_a,size=818M,uuid=${uuid_gpt_system_a};" \ + "name=system_b,size=818M,uuid=${uuid_gpt_system_b};" \ + "name=vendor_a,size=50M,uuid=${uuid_gpt_vendor_a};" \ + "name=vendor_b,size=50M,uuid=${uuid_gpt_vendor_b};" \ + "name=cache,size=100M,uuid=${uuid_gpt_cache};" \ + "name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \ + "name=persist,size=4M,uuid=${uuid_gpt_persist};" \ + "name=userdata,size=-,uuid=${uuid_gpt_userdata};\0" \ + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "partitions=" PARTS_DEFAULT \ + +#endif + +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_PREBOOT + #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 2e8dbc7a78..c90f5315fd 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -371,7 +371,6 @@ unsigned long get_board_ddr_clk(void); * Serial Port */ #ifdef CONFIG_LPUART -#define CONFIG_FSL_LPUART #define CONFIG_LPUART_32B_REG #else #define CONFIG_CONS_INDEX 1 @@ -660,12 +659,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM #define CONFIG_CMD_HASH #define CONFIG_SHA_HW_ACCEL +#endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB #include <asm/fsl_secure_boot.h> -#endif #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index c12ba3ac91..f820de3b09 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -266,12 +266,13 @@ * Serial Port */ #ifdef CONFIG_LPUART -#define CONFIG_FSL_LPUART #define CONFIG_LPUART_32B_REG #else #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#endif #define CONFIG_SYS_NS16550_CLK get_serial_clock() #endif @@ -516,12 +517,11 @@ #define CONFIG_MISC_INIT_R /* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM #define CONFIG_CMD_HASH #define CONFIG_SHA_HW_ACCEL +#endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_BLOB #include <asm/fsl_secure_boot.h> -#endif #endif diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 677d28113c..6150bc1a74 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -121,6 +121,7 @@ #endif /* IFC */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) @@ -139,6 +140,7 @@ #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #endif +#endif /* I2C */ #define CONFIG_CMD_I2C @@ -197,14 +199,39 @@ #define CONFIG_DOS_PARTITION #endif +/* DSPI */ +#define CONFIG_FSL_DSPI +#ifdef CONFIG_FSL_DSPI +#define CONFIG_CMD_SF +#define CONFIG_DM_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ +#define CONFIG_SPI_FLASH_SST /* cs1 */ +#define CONFIG_SPI_FLASH_EON /* cs2 */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 +#endif +#endif + +#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ + /* FMan ucode */ #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 1000000 +#define CONFIG_ENV_SPI_MODE 0x03 +#else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ #define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif @@ -252,4 +279,10 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ +/* Hash command with SHA acceleration supported in hardware */ +#ifdef CONFIG_FSL_CAAM +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL +#endif + #endif /* __LS1043A_COMMON_H */ diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 398f1c3f77..4ab8e13ba1 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -10,10 +10,16 @@ #include "ls1043a_common.h" #define CONFIG_DISPLAY_CPUINFO +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_DISPLAY_BOARDINFO_LATE +#else #define CONFIG_DISPLAY_BOARDINFO +#endif #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x40010000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -33,7 +39,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DIMM_SLOTS_PER_CTLR 1 /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_NR_DRAM_BANKS 2 #define CONFIG_DDR_SPD #define SPD_EEPROM_ADDRESS 0x51 @@ -85,8 +91,18 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_SD_BOOT +#ifdef CONFIG_SD_BOOT_QSPI +#define CONFIG_SYS_FSL_PBL_RCW \ + board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg +#else #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg #endif +#endif + +/* LPUART */ +#ifdef CONFIG_LPUART +#define CONFIG_LPUART_32B_REG +#endif /* SATA */ #define CONFIG_LIBATA @@ -108,6 +124,7 @@ unsigned long get_board_ddr_clk(void); /* * IFC Definitions */ +#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ @@ -191,6 +208,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#endif #ifdef CONFIG_NAND_BOOT #define CONFIG_SPL_PAD_TO 0x20000 /* block aligned */ @@ -198,6 +216,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_U_BOOT_SIZE (640 << 10) #endif +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#endif + /* * QIXIS Definitions */ @@ -212,7 +236,14 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 -#define QIXIS_RST_CTL_RESET 0x44 +#define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_SD_QSPI 0xff +#define QIXIS_LBMAP_QSPI 0xff +#define QIXIS_RCW_SRC_NAND 0x106 +#define QIXIS_RCW_SRC_SD 0x040 +#define QIXIS_RCW_SRC_QSPI 0x045 +#define QIXIS_RST_CTL_RESET 0x41 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 @@ -338,6 +369,16 @@ unsigned long get_board_ddr_clk(void); #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 +/* QSPI device */ +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#define CONFIG_FSL_QSPI +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 +#endif +#endif + /* * Miscellaneous configurable options */ @@ -388,6 +429,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) @@ -401,4 +447,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_MII #define CONFIG_CMDLINE_TAG +#include <asm/fsl_secure_boot.h> + #endif /* __LS1043AQDS_H__ */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 585114f3d5..506f50d895 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -222,16 +222,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -/* DSPI */ -#define CONFIG_FSL_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_CMD_SF -#define CONFIG_DM_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_BUS 1 -#define CONFIG_SF_DEFAULT_CS 0 -#endif - /* * Environment */ @@ -291,14 +281,6 @@ #define CONFIG_CMD_EXT2 #endif -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CMD_HASH -#define CONFIG_SHA_HW_ACCEL -#define CONFIG_CMD_BLOB -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit */ -#define CONFIG_ESBC_ADDR_64BIT -#endif - #include <asm/fsl_secure_boot.h> #endif /* __LS1043ARDB_H__ */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 4ae7d11685..7323e10731 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -196,7 +196,7 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER) #define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (254UL * 1024 * 1024) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024) #define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024) #endif diff --git a/include/configs/malta.h b/include/configs/malta.h index 3faac37632..aecc8cef90 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -7,9 +7,6 @@ #ifndef _MALTA_CONFIG_H #define _MALTA_CONFIG_H -#include <asm/addrspace.h> -#include <asm/malta.h> - /* * System configuration */ @@ -83,14 +80,14 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (115200 * 16) -#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE) -#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE) +#define CONFIG_SYS_NS16550_COM1 0xb80003f8 +#define CONFIG_SYS_NS16550_COM2 0xbb0003f8 #define CONFIG_CONS_INDEX 1 /* * Flash configuration */ -#define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE) +#define CONFIG_SYS_FLASH_BASE 0xbe000000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 #define CONFIG_SYS_FLASH_CFI diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index da49243ebf..43d7fd03a3 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -10,10 +10,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#endif #define CONFIG_DISPLAY_BOARDINFO_LATE /* @@ -55,10 +51,7 @@ #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ #define CONFIG_PHY_MARVELL /* there is a marvell phy */ -#define CONFIG_PHY_ADDR { 0x0, 0x1, 0x2, 0x3 } -#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ -#define CONFIG_RESET_PHY_R #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ #define CONFIG_SYS_ALT_MEMTEST @@ -91,9 +84,9 @@ #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) @@ -112,7 +105,7 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ +#define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index f93861d770..97a0d86b91 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -32,54 +32,20 @@ #endif /* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -# define CONFIG_XILINX_UARTLITE -# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -# define CONSOLE_ARG "console=console=ttyUL0,115200\0" -#elif XILINX_UART16550_BASEADDR -# define CONFIG_SYS_NS16550_SERIAL -# if defined(__MICROBLAZEEL__) -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# else -# define CONFIG_SYS_NS16550_REG_SIZE 4 -# endif -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_COM1 \ - ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ # define CONFIG_BAUDRATE 115200 - /* The following table includes the supported baudrates */ # define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -# define CONSOLE_ARG "console=console=ttyS0,115200\0" -#else -# error Undefined uart -#endif /* setting reset address */ /*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ -/* ethernet */ -#undef CONFIG_SYS_ENET -#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL) -# define CONFIG_XILINX_EMACLITE 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_AXIEMAC_BASEADDR) -# define CONFIG_XILINX_AXIEMAC 1 -# define CONFIG_SYS_ENET -#endif - -#undef ET_DEBUG - /* gpio */ #ifdef XILINX_GPIO_BASEADDR # define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif +#define CONFIG_BOARD_LATE_INIT /* interrupt controller */ #ifdef XILINX_INTC_BASEADDR @@ -103,13 +69,6 @@ # endif #endif -#if !defined(CONFIG_OF_CONTROL) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL)) -/* ddr sdram - main memory */ -# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#endif - #define CONFIG_SYS_MALLOC_LEN 0xC0000 /* Stack location before relocation */ @@ -198,16 +157,6 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -# define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -# define SYSTEMACE_CONFIG_FPGA -# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -# define CONFIG_DOS_PARTITION -#endif - #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -245,17 +194,6 @@ # undef CONFIG_CMD_CACHE #endif -#ifdef CONFIG_SYS_ENET -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_TFTPPUT -#endif - -#if defined(CONFIG_SYSTEMACE) -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -#endif - #if defined(FLASH) # define CONFIG_CMD_JFFS2 # define CONFIG_CMD_UBI @@ -315,7 +253,7 @@ #define CONFIG_SYS_MAXARGS 15 #define CONFIG_SYS_LONGHELP /* default load address */ -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START +#define CONFIG_SYS_LOAD_ADDR 0 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ #define CONFIG_BOOTARGS "root=romfs" @@ -342,15 +280,10 @@ #define CONFIG_CMDLINE_EDITING -#define CONFIG_NETCONSOLE #define CONFIG_SYS_CONSOLE_IS_IN_ENV -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - /* Enable flat device tree support */ #define CONFIG_LMB 1 -#define CONFIG_FIT 1 #define CONFIG_OF_LIBFDT 1 #if defined(CONFIG_XILINX_AXIEMAC) @@ -358,20 +291,19 @@ # define CONFIG_CMD_MII 1 # define CONFIG_PHY_GIGE 1 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -# define CONFIG_PHYLIB 1 # define CONFIG_PHY_ATHEROS 1 # define CONFIG_PHY_BROADCOM 1 # define CONFIG_PHY_DAVICOM 1 # define CONFIG_PHY_LXT 1 # define CONFIG_PHY_MARVELL 1 # define CONFIG_PHY_MICREL 1 +# define CONFIG_PHY_MICREL_KSZ9021 # define CONFIG_PHY_NATSEMI 1 # define CONFIG_PHY_REALTEK 1 # define CONFIG_PHY_VITESSE 1 #else # undef CONFIG_MII # undef CONFIG_CMD_MII -# undef CONFIG_PHYLIB #endif /* SPL part */ diff --git a/include/configs/ml507.h b/include/configs/ml507.h deleted file mode 100644 index 89a72904b3..0000000000 --- a/include/configs/ml507.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/xilinx/ml507/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 256 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 1fd7ce3178..179b4f9007 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -1,17 +1,7 @@ /* * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __MX6_COMMON_H @@ -35,6 +25,8 @@ #define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + #include <linux/sizes.h> #include <asm/arch/imx-regs.h> #include <asm/imx-common/gpio.h> diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index c946176416..4374c3a41f 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -156,7 +156,7 @@ /* Miscellaneous configurable options */ #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 @@ -203,6 +203,7 @@ #define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 40000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SPI_FLASH_STMICRO #define FSL_QSPI_FLASH_NUM 1 #define FSL_QSPI_FLASH_SIZE SZ_32M #endif diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index d507fb48da..fac7c3f2e2 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -23,6 +23,8 @@ #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define CONFIG_SYS_FSL_CLK +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + /* Enable iomux-lpsr support */ #define CONFIG_IOMUX_LPSR #define CONFIG_IMX_FIXED_IVT_OFFSET diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 22e515cccd..d23e4f3c40 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -179,8 +179,33 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC + +/* + * If want to use nand, define CONFIG_NAND_MXS and rework board + * to support nand, since emmc has pin conflicts with nand + */ +#ifdef CONFIG_NAND_MXS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +/* NAND stuff */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 +#endif + #define CONFIG_ENV_OFFSET (8 * SZ_64K) +#ifdef CONFIG_NAND_MXS +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else #define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ #define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 9464153f58..176f6e902b 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -37,8 +37,6 @@ #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) -#define CONFIG_I2C_EDID - /* LCD support */ #define CONFIG_LCD #define CONFIG_PWM_TEGRA diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index cf2bc3e6d5..5e33845da0 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -19,8 +19,6 @@ #include <configs/ti_omap3_common.h> #include <asm/mach-types.h> -#undef CONFIG_BOOTDELAY - /* * Display CPU and Board information */ @@ -43,7 +41,7 @@ #else #error "status LED not defined for this machine." #endif -#define RED_LED_DEV 0 +#define RED_LED_DEV 0 #define STATUS_LED_BIT RED_LED_GPIO #define STATUS_LED_STATE STATUS_LED_ON #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) @@ -56,7 +54,7 @@ #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ /* USB */ -#define CONFIG_USB_MUSB_UDC 1 +#define CONFIG_USB_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 #define CONFIG_TWL4030_USB 1 @@ -75,18 +73,11 @@ #ifdef CONFIG_BOOT_ONENAND #define CONFIG_CMD_ONENAND /* ONENAND support */ #endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ - (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) -#endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING -/*#undef CONFIG_ENV_IS_NOWHERE*/ - #ifndef CONFIG_SPL_BUILD -#include <config_distro_defaults.h> - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial\0" \ @@ -138,7 +129,7 @@ #if defined(CONFIG_CMD_NET) #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 +#define CONFIG_SMC911X_BASE 0x2C000000 #endif /* (CONFIG_CMD_NET) */ /* OneNAND boot config */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 7b60f29bd2..e9ce3f6d1c 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -50,6 +50,9 @@ * Hardware drivers */ +/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ + /* * select serial console configuration */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 4633fec164..bce4fad826 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -5,19 +5,7 @@ * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 8eac81aa21..d9dd9bdcd4 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -4,14 +4,7 @@ * See file CREDITS for list of people who contributed to this * project. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef __CONFIG_H diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 41b7393c0e..f490e7911d 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -81,6 +81,11 @@ #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ /* The following #defines are needed to get flash environment right */ +/* ROM version */ +/* #define CONFIG_SYS_TEXT_BASE 0xbfc00000 */ +/* SDRAM version */ +#define CONFIG_SYS_TEXT_BASE 0x83800000 + #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index b851bba25d..891bdb0ecf 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -27,7 +27,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART1_BASE /* Allow to overwrite serial and ethaddr */ diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 4258dcb7f6..b0d2ffe5b4 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -14,7 +14,6 @@ #include <configs/x86-common.h> #define CONFIG_SYS_MONITOR_LEN (1 << 20) -#define CONFIG_ARCH_MISC_INIT #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_PCI_PNP diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 238711a699..ebf1ab09b3 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -16,7 +16,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_MALLOC_LEN (32 << 20) #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_THUMB_BUILD #define CONFIG_OF_LIBFDT #define CONFIG_DISPLAY_BOARDINFO @@ -26,6 +25,7 @@ #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) #define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT @@ -41,6 +41,12 @@ #define CONFIG_ROCKCHIP_COMMON #define CONFIG_SPL_ROCKCHIP_COMMON +#define CONFIG_SILENT_CONSOLE +#ifndef CONFIG_SPL_BUILD +# define CONFIG_SYS_CONSOLE_IS_IN_ENV +# define CONFIG_CONSOLE_MUX +#endif + /* MMC/SD IP block */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -73,6 +79,7 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_TIME +#define CONFIG_CMD_GPIO #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_NR_DRAM_BANKS 1 @@ -109,6 +116,7 @@ "fdt_high=0x1fffffff\0" \ "initrd_high=0x1fffffff\0" \ ENV_MEM_LAYOUT_SETTINGS \ + ROCKCHIP_DEVICE_SETTINGS \ BOOTENV #endif diff --git a/include/configs/rock2.h b/include/configs/rock2.h new file mode 100644 index 0000000000..a29f55709d --- /dev/null +++ b/include/configs/rock2.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define ROCKCHIP_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" + +#include <configs/rk3288_common.h> + +#define CONFIG_SPL_MMC_SUPPORT + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +/* SPL @ 32k for ~36k + * ENV @ 96k + * u-boot @ 128K + */ +#define CONFIG_ENV_OFFSET (96 * 1024) + +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 + +#endif diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h index 1b83eb36a7..927bae78eb 100644 --- a/include/configs/rpi-common.h +++ b/include/configs/rpi-common.h @@ -88,6 +88,9 @@ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_SMSC95XX #define CONFIG_MISC_INIT_R +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_SYS_STDIO_DEREGISTER #endif /* Console UART */ @@ -111,6 +114,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_PREBOOT "usb start" /* Shell */ #define CONFIG_SYS_MAXARGS 8 @@ -133,7 +137,7 @@ /* Environment */ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define ENV_DEVICE_SETTINGS \ - "stdin=serial,lcd\0" \ + "stdin=serial,usbkbd\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index d3112e1760..4bffd8d3d3 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -158,24 +158,23 @@ /* LCD and keyboard require SDL support */ #ifdef CONFIG_SANDBOX_SDL -#define CONFIG_LCD -#define CONFIG_VIDEO_SANDBOX_SDL #define CONFIG_CMD_BMP -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define LCD_BPP LCD_COLOR16 #define CONFIG_LCD_BMP_RLE8 +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN_ALIGN #define CONFIG_KEYBOARD #define SANDBOX_SERIAL_SETTINGS "stdin=serial,cros-ec-keyb,usbkbd\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" #else #define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" #endif #define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 08046b5e99..a995415432 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -126,21 +126,9 @@ */ #define CONFIG_PARTITION_UUIDS -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - #define CONFIG_CMD_PART /* - * Filesystems - */ - -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FAT - -/* * SPL */ @@ -257,16 +245,24 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr_r=0x82000000\0" \ + "loadaddr=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "fdtaddr=0x88000000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "scriptaddr=0x80000000\0" \ + "bootm_size=0x10000000\0" \ "boot_mmc_dev=0\0" \ "kernel_mmc_part=3\0" \ "recovery_mmc_part=4\0" \ + "fdtfile=omap3-sniper.dtb\0" \ + "bootfile=/boot/extlinux/extlinux.conf\0" \ "bootargs=console=ttyO2 vram=5M,0x9FA00000 omapfb.vram=0:5M\0" /* - * ATAGs / Device Tree + * ATAGs */ -#define CONFIG_OF_LIBFDT #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG @@ -278,7 +274,6 @@ */ #define CONFIG_SYS_LOAD_ADDR 0x82000000 -#define CONFIG_BOOTDELAY 1 #define CONFIG_ANDROID_BOOT_IMAGE @@ -299,5 +294,6 @@ */ #include <config_defaults.h> +#include <config_distro_defaults.h> #endif diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index a09e906a6b..8de0ab9046 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -370,7 +370,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); /* SPL QSPI boot support */ #ifdef CONFIG_SPL_SPI_SUPPORT -#define CONFIG_DM_SEQ_ALIAS 1 #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 3e808613b0..85d492ddc5 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -8,7 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_STM32F4 #define CONFIG_SYS_THUMB_BUILD #define CONFIG_STM32F4DISCOVERY diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 790e7047d1..b4dfb3cc47 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -212,7 +212,7 @@ #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ - defined CONFIG_I2C4_ENABLE + defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_SYS_I2C_SPEED 400000 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index ec0a812aa1..2d941ca65b 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -384,7 +384,7 @@ do { \ if (i) \ sprintf(ethname, "eth%daddr", i); \ else \ - sprintf(ethname, "ethaddr"); \ + strcpy(ethname, "ethaddr"); \ printf("Setting %s from EEPROM with %s\n", ethname, buf);\ setenv(ethname, buf); \ } \ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 671071ba98..21454d47cb 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -1,17 +1,7 @@ /* * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _TEGRA114_COMMON_H_ diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h new file mode 100644 index 0000000000..cd9d6b693b --- /dev/null +++ b/include/configs/theadorable.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_THEADORABLE_H +#define _CONFIG_THEADORABLE_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_DISPLAY_BOARDINFO_LATE + +/* + * TEXT_BASE needs to be below 16MiB, since this area is scrubbed + * for DDR ECC byte filling in the SPL before loading the main + * U-Boot into it. + */ +#define CONFIG_SYS_TEXT_BASE 0x00800000 +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ + +/* + * Commands configuration + */ +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_ENV +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SATA +#define CONFIG_CMD_TIME + +/* + * The debugging version enables USB support via defconfig. + * This version should also enable all other non-production + * interfaces / features. + */ +#ifdef CONFIG_USB +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SPI +#define CONFIG_CMD_TFTPPUT +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MVTWSI +#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 + +/* USB/EHCI configuration */ +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 + +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ + +/* SPI NOR flash default params, used by sf commands */ +#define CONFIG_SF_DEFAULT_SPEED 27777777 /* for fast SPL booting */ +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ +#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ +#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_PHY_MARVELL /* there is a marvell phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ + +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PREBOOT +#define CONFIG_FIT + +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* Keep device tree and initrd in lower memory so the kernel can access them */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0x10000000\0" \ + "initrd_high=0x10000000\0" + +/* SATA support */ +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA_MV +#define CONFIG_LIBATA +#define CONFIG_LBA48 +#define CONFIG_EFI_PARTITION +#define CONFIG_DOS_PARTITION + +/* Additional FS support/configuration */ +#define CONFIG_SUPPORT_VFAT + +/* PCIe support */ +#ifdef CONFIG_CMD_PCI +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PCI +#define CONFIG_PCI_MVEBU +#define CONFIG_PCI_PNP +#endif +#endif + +/* Enable LCD and reserve 512KB from top of memory*/ +#define CONFIG_SYS_MEM_TOP_HIDE 0x80000 + +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CMD_BMP + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MALLOC_SIMPLE +#endif + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_DDR_FIXED_SIZE (2 << 20) /* 2GiB */ + +#endif /* _CONFIG_THEADORABLE_H */ diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h new file mode 100644 index 0000000000..cece4ddbcf --- /dev/null +++ b/include/configs/thunderx_88xx.h @@ -0,0 +1,145 @@ +/** + * (C) Copyright 2014, Cavium Inc. + * + * SPDX-License-Identifier: GPL-2.0+ +**/ + +#ifndef __THUNDERX_88XX_H__ +#define __THUNDERX_88XX_H__ + +#define CONFIG_REMAKE_ELF + +#define CONFIG_THUNDERX + +#define CONFIG_SYS_64BIT + +#define CONFIG_SYS_NO_FLASH + + +#define CONFIG_IDENT_STRING \ + " for Cavium Thunder CN88XX ARM v8 Multi-Core" +#define CONFIG_BOOTP_VCI_STRING "Diagnostics" + +#define MEM_BASE 0x00500000 + +#define CONFIG_COREID_MASK 0xffffff + +#define CONFIG_SYS_FULL_VA + +#define CONFIG_SYS_LOWMEM_BASE MEM_BASE + +#define CONFIG_SYS_MEM_MAP {{0x000000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_NORMAL) | \ + PTL2_BLOCK_NON_SHARE}, \ + {0x800000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_DEVICE_NGNRNE) | \ + PTL2_BLOCK_NON_SHARE}, \ + {0x840000000000UL, 0x40000000000UL, \ + PTL2_MEMTYPE(MT_DEVICE_NGNRNE) | \ + PTL2_BLOCK_NON_SHARE}, \ + } + +#define CONFIG_SYS_MEM_MAP_SIZE 3 + +#define CONFIG_SYS_VA_BITS 48 +#define CONFIG_SYS_PTL2_BITS 42 +#define CONFIG_SYS_BLOCK_SHIFT 29 +#define CONFIG_SYS_PTL1_ENTRIES 64 +#define CONFIG_SYS_PTL2_ENTRIES 8192 + +#define CONFIG_SYS_PGTABLE_SIZE \ + ((CONFIG_SYS_PTL1_ENTRIES + \ + CONFIG_SYS_MEM_MAP_SIZE * CONFIG_SYS_PTL2_ENTRIES) * 8) +#define CONFIG_SYS_TCR_EL1_IPS_BITS (5UL << 32) +#define CONFIG_SYS_TCR_EL2_IPS_BITS (5 << 16) +#define CONFIG_SYS_TCR_EL3_IPS_BITS (5 << 16) + +/* Link Definitions */ +#define CONFIG_SYS_TEXT_BASE 0x00500000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_LIBFDT + +/* SMP Spin Table Definitions */ +#define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY (0x1800000) /* 24MHz */ + + +#define CONFIG_SYS_MEMTEST_START MEM_BASE +#define CONFIG_SYS_MEMTEST_END (MEM_BASE + PHYS_SDRAM_1_SIZE) + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* PL011 Serial Configuration */ + +#define CONFIG_PL01X_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_CONS_INDEX 1 + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE (0x801000000000) +#define GICR_BASE (0x801000002000) +#define CONFIG_SYS_SERIAL0 0x87e024000000 +#define CONFIG_SYS_SERIAL1 0x87e025000000 + +#define CONFIG_BAUDRATE 115200 + +/* Command line configuration */ +#define CONFIG_MENU + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_PXE +#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LOAD_ADDR (MEM_BASE) + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE (0x80000000-MEM_BASE) /* 2048 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Initial environment variables */ +#define UBOOT_IMG_HEAD_SIZE 0x40 +/* C80000 - 0x40 */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel_addr=08007ffc0\0" \ + "fdt_addr=0x94C00000\0" \ + "fdt_high=0x9fffffff\0" + +#define CONFIG_BOOTARGS \ + "console=ttyAMA0,115200n8 " \ + "earlycon=pl011,0x87e024000000 " \ + "debug maxcpus=48 rootwait rw "\ + "root=/dev/sda2 coherent_pool=16M" +#define CONFIG_BOOTDELAY 5 + +/* Do not preserve environment */ +#define CONFIG_ENV_IS_NOWHERE 1 +#define CONFIG_ENV_SIZE 0x1000 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_MAXARGS 64 /* max command args */ +#define CONFIG_NO_RELOCATION 1 +#define CONFIG_LIB_RAND +#define PLL_REF_CLK 50000000 /* 50 MHz */ +#define NS_PER_REF_CLK_TICK (1000000000/PLL_REF_CLK) + +#endif /* __THUNDERX_88XX_H__ */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 2087eb194c..199612be84 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -283,5 +283,6 @@ #endif #include <config_distro_defaults.h> +#define CONFIG_CMD_EXT4_WRITE #endif /* __CONFIG_TI_ARMV7_COMMON_H__ */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index 1c71cb636b..02fdcdca8f 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -73,7 +73,6 @@ #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SYS_NAND_BASE 0x30000000 #endif diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 08130ebd1b..8b6c0658e8 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -82,6 +82,32 @@ /* * Environment setup */ +#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=" \ + "setenv mmcdev " #instance"; "\ + "setenv bootpart " #instance":2 ; "\ + "run mmcboot\0" + +#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ + #devtypel #instance " " + +#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ + #devtypel #instance " " + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(LEGACY_MMC, legacy_mmc, 0) \ + func(MMC, mmc, 1) \ + func(LEGACY_MMC, legacy_mmc, 1) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run distro_bootcmd" + +#include <config_distro_bootcmd.h> + #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ DEFAULT_MMC_TI_ARGS \ @@ -120,30 +146,7 @@ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadbootenv; then " \ - "run importbootenv; " \ - "fi;" \ - "if test -n ${uenvcmd}; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt;" \ - "run mmcboot; " \ - "fi; " \ - "if run loaduimage; then " \ - "run uimageboot;" \ - "fi; " \ - "fi" + BOOTENV /* * Defines for SPL diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 2d492f8ba7..d164e6abd4 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -164,6 +164,7 @@ */ #ifdef CONFIG_SPL_BUILD #undef CONFIG_DM_MMC +#undef CONFIG_TIMER #endif #endif /* __CONFIG_TI_OMAP5_COMMON_H */ diff --git a/include/configs/udoo.h b/include/configs/udoo.h index 8ec073d343..3d0cafa125 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -96,11 +96,11 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 463c6871c0..599b26959e 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -201,15 +201,18 @@ "ramdisk_addr_r=0x84a00000\0" \ "ramdisk_size=0x00600000\0" \ "ramdisk_file=rootfs.cpio.uboot\0" \ - "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ + "norboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ + "setexpr kernel_addr $nor_base + $kernel_addr &&" \ "setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \ "setexpr fdt_addr $nor_base + $fdt_addr &&" \ "bootz $kernel_addr $ramdisk_addr $fdt_addr\0" \ - "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ + "nandboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ + "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ - "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ + "tftpboot=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ + "tftpboot $kernel_addr_r $bootfile &&" \ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ "tftpboot $fdt_addr_r $fdt_file &&" \ "bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" @@ -226,6 +229,8 @@ "nand write $loadaddr 0x00010000 0x000f0000\0" \ LINUXBOOT_ENV_SETTINGS +#define CONFIG_SYS_BOOTMAPSZ 0x20000000 + /* Open Firmware flat tree */ #define CONFIG_OF_LIBFDT diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h deleted file mode 100644 index 298fa3e6d0..0000000000 --- a/include/configs/v5fx30teval.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_ML507 1 -#include "../board/avnet/v5fx30teval/xparameters.h" - -/*Mem Map*/ -#define CONFIG_SYS_SDRAM_SIZE_MB 64 - -/*Env*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x1A0000 -#define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) - -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 131 -#define MTDIDS_DEFAULT "nor0=v5fx30t-flash" -#define MTDPARTS_DEFAULT "mtdparts=v5fx30t-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 872f2f0c99..ea6e3c0d0f 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -32,6 +32,7 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ +#define CONFIG_SYS_TEXT_BASE 0x87000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) #define CONFIG_SYS_MALLOC_LEN (1 << 20) diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 34df6f0352..dcfafaf631 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -34,7 +34,6 @@ #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_FSL_LPUART #define LPUART_BASE UART1_BASE /* Allow to overwrite serial and ethaddr */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 70ec1032fd..dc7b227d25 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -100,6 +100,7 @@ * Command line configuration. */ #define CONFIG_CMD_DATE +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_IO #define CONFIG_CMD_IRQ @@ -208,6 +209,7 @@ #define CONFIG_HOSTNAME x86 #define CONFIG_BOOTFILE "bzImage" #define CONFIG_LOADADDR 0x1000000 +#define CONFIG_RAMDISK_ADDR 0x4000000 #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_STD_DEVICES_SETTINGS \ @@ -215,7 +217,7 @@ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ "othbootargs=acpi=off\0" \ - "ramdiskaddr=0x2000000\0" \ + "ramdiskaddr=0x4000000\0" \ "ramdiskfile=initramfs.gz\0" #define CONFIG_RAMBOOTCOMMAND \ diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index eb400d0960..d01d88b33f 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -101,22 +101,10 @@ #define CONFIG_SYS_NO_FLASH #endif -/* serial communication */ -#ifdef XPAR_UARTLITE_0_BASEADDR -#define CONFIG_XILINX_UARTLITE -#define XILINX_UARTLITE_BASEADDR XPAR_UARTLITE_0_BASEADDR -#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE -#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -#else -#ifdef XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 4 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR -#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_OF_LIBFDT 1 #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } -#endif -#endif +/* The following table includes the supported baudrates */ +# define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h index 40fa0878a4..6182b0e7cf 100644 --- a/include/configs/xilinx-ppc405-generic.h +++ b/include/configs/xilinx-ppc405-generic.h @@ -1,7 +1,7 @@ /* * * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * (C) Copyright 2008 @@ -14,6 +14,9 @@ #include "../board/xilinx/ppc405-generic/xparameters.h" +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + /* sdram */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 @@ -26,16 +29,16 @@ #define CONFIG_ENV_OVERWRITE 1 /*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" +#define CONFIG_PREBOOT "echo U-Boot is up and running;" /*Flash*/ -#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 -#define MTDIDS_DEFAULT "nor0=ppc405-flash" -#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" -#include <configs/xilinx-ppc405.h> +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h deleted file mode 100644 index a0151fe8f4..0000000000 --- a/include/configs/xilinx-ppc405.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * - * (C) Copyright 2008 - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* cpu parameter */ -#define CONFIG_405 1 -#define CONFIG_XILINX_405 1 - -#include <configs/xilinx-ppc.h> - -#endif diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h index 95b8834078..f2505a6cd2 100644 --- a/include/configs/xilinx-ppc440-generic.h +++ b/include/configs/xilinx-ppc440-generic.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,31 +8,42 @@ #ifndef __CONFIG_H #define __CONFIG_H -/*CPU*/ +/* CPU */ #define CONFIG_440 1 +#define CONFIG_XILINX_440 1 #define CONFIG_XILINX_PPC440_GENERIC 1 #include "../board/xilinx/ppc440-generic/xparameters.h" -/*Mem Map*/ +/* Mem Map */ #define CONFIG_SYS_SDRAM_SIZE_MB 256 -/*Env*/ +/* Env */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OFFSET 0x340000 +#define CONFIG_ENV_OFFSET 0x340000 #define CONFIG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CONFIG_ENV_OFFSET) -/*Misc*/ -#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" - -/*Flash*/ -#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) -#define CONFIG_SYS_MAX_FLASH_SECT 259 -#define MTDIDS_DEFAULT "nor0=ml507-flash" -#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)" - -/*Generic Configs*/ -#include <configs/xilinx-ppc440.h> +/* Misc */ +#define CONFIG_PREBOOT "echo U-Boot is up and running;" + +/* Flash */ +#define CONFIG_SYS_FLASH_SIZE (128*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +#define MTDIDS_DEFAULT "nor0=flash" +#define MTDPARTS_DEFAULT "mtdparts=flash:-(user)" + +/* Net */ +#ifdef XPAR_LLTEMAC_0_BASEADDR +#define CONFIG_XILINX_LL_TEMAC +#define CONFIG_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MARVELL +#define CONFIG_NET_RANDOM_ETHADDR +#define CONFIG_LIB_RAND +#endif + +/* Generic Configs */ +#include <configs/xilinx-ppc.h> #endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h deleted file mode 100644 index f45700878e..0000000000 --- a/include/configs/xilinx-ppc440.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __CONFIG_GEN_H -#define __CONFIG_GEN_H - -/*CPU*/ -#define CONFIG_440 1 -#define CONFIG_XILINX_440 1 - -#include <configs/xilinx-ppc.h> - -#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 03f74508ef..27ef74daf5 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -23,10 +23,8 @@ #define GICD_BASE 0xF9010000 #define GICC_BASE 0xF9020000 -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_SDRAM_SIZE 0x40000000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE @@ -37,7 +35,9 @@ /* Cache Definitions */ #define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#if !defined(CONFIG_IDENT_STRING) +# define CONFIG_IDENT_STRING " Xilinx ZynqMP" +#endif #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -45,7 +45,9 @@ #define CONFIG_OF_LIBFDT /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ -#define COUNTER_FREQUENCY 4000000 +#if !defined(COUNTER_FREQUENCY) +# define COUNTER_FREQUENCY 100000000 +#endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) @@ -137,9 +139,9 @@ #define CONFIG_THOR_RESET_OFF #define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ - "set dfu_alt_info " \ - "Image ram 0x200000 0x1800000\\\\;" \ - "system.dtb ram 0x7000000 0x40000\0" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr $kernel_size\\\\;" \ + "system.dtb ram $fdt_addr $fdt_size\0" \ "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" @@ -156,12 +158,14 @@ "kernel_addr=0x80000\0" \ "fdt_addr=0x7000000\0" \ "fdt_high=0x10000000\0" \ - "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \ - "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \ + "kernel_size=0x2000000\0" \ + "fdt_size=0x80000\0" \ + "sdbootdev=0\0"\ + "sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \ + "load mmc $sdbootdev:$partid $kernel_addr Image && " \ + "booti $kernel_addr - $fdt_addr\0" \ DFU_ALT_INFO -#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \ - "earlycon=cdns,mmio,0xff000000,${baudrate}n8" #define CONFIG_PREBOOT "run bootargs" #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 5 @@ -189,7 +193,10 @@ # define CONFIG_MII # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHY_MARVELL +# define CONFIG_PHY_NATSEMI # define CONFIG_PHY_TI +# define CONFIG_PHY_GIGE +# define PHY_ANEG_TIMEOUT 20000 #endif /* I2C */ diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h index ec39211af3..9906c426f5 100644 --- a/include/configs/xilinx_zynqmp_ep.h +++ b/include/configs/xilinx_zynqmp_ep.h @@ -1,7 +1,5 @@ /* - * Configuration for Xilinx ZynqMP emulation - * platforms. See zynqmp-common.h for ZynqMP - * common configs + * Configuration for Xilinx ZynqMP emulation platforms * * (C) Copyright 2014 - 2015 Xilinx, Inc. * Michal Simek <michal.simek@xilinx.com> @@ -17,6 +15,7 @@ #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_SDHCI_MAX_FREQ 52000000 +#define CONFIG_ZYNQ_SDHCI_MIN_FREQ (CONFIG_ZYNQ_SDHCI_MAX_FREQ << 9) #define CONFIG_ZYNQ_I2C0 #define CONFIG_SYS_I2C_ZYNQ #define CONFIG_ZYNQ_EEPROM @@ -24,6 +23,13 @@ #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ ZYNQMP_USB1_XHCI_BASEADDR} +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_SDRAM_SIZE 0x40000000 + +#define COUNTER_FREQUENCY 4000000 + #include <configs/xilinx_zynqmp.h> #endif /* __CONFIG_ZYNQMP_EP_H */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 0ab60839b6..e8c3ef0c38 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -66,7 +66,6 @@ #ifdef CONFIG_ZYNQ_QSPI # define CONFIG_SF_DEFAULT_SPEED 30000000 # define CONFIG_SPI_FLASH_ISSI -# define CONFIG_SPI_FLASH_BAR # define CONFIG_CMD_SF #endif |
