summaryrefslogtreecommitdiffstats
path: root/include/configs/smdk6400.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/smdk6400.h')
-rw-r--r--include/configs/smdk6400.h116
1 files changed, 58 insertions, 58 deletions
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index ea65c0ef1e..1784cc622c 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -40,7 +40,7 @@
#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
-#define CFG_SDRAM_BASE 0x50000000
+#define CONFIG_SYS_SDRAM_BASE 0x50000000
/* input clock of PLL: SMDK6400 has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ 12000000
@@ -68,8 +68,8 @@
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */
/*
* Hardware drivers
@@ -83,9 +83,9 @@
*/
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */
-#define CFG_HUSH_PARSER /* use "hush" command parser */
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#define CONFIG_CMDLINE_EDITING
@@ -126,22 +126,22 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE 384 /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START CFG_SDRAM_BASE /* memtest works on */
-#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
-#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* default load address */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default load address */
-#define CFG_HZ 1000
+#define CONFIG_SYS_HZ 1000
/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*-----------------------------------------------------------------------
* Stack sizes
@@ -171,30 +171,30 @@
/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 CFG_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */
-#define CFG_FLASH_BASE 0x10000000
-#define CFG_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0x10000000
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
/* AM29LV160B has 35 sectors, AM29LV800B - 19 */
-#define CFG_MAX_FLASH_SECT 40
+#define CONFIG_SYS_MAX_FLASH_SECT 40
#define CONFIG_AMD_LV800
-#define CFG_FLASH_CFI 1 /* Use CFI parameters (needed?) */
+#define CONFIG_SYS_FLASH_CFI 1 /* Use CFI parameters (needed?) */
/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */
#define CONFIG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_FLASH_CFI_LEGACY
-#define CFG_FLASH_LEGACY_512Kx16
+#define CONFIG_SYS_FLASH_LEGACY_512Kx16
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (5 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (5 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (5 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
@@ -205,65 +205,65 @@
#define CONFIG_IDENT_STRING " for SMDK6400"
/* base address for uboot */
-#define CFG_PHY_UBOOT_BASE (CFG_SDRAM_BASE + 0x07e00000)
+#define CONFIG_SYS_PHY_UBOOT_BASE (CONFIG_SYS_SDRAM_BASE + 0x07e00000)
/* total memory available to uboot */
-#define CFG_UBOOT_SIZE (1024 * 1024)
+#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
#ifdef CONFIG_ENABLE_MMU
-#define CFG_MAPPED_RAM_BASE 0xc0000000
+#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
"bootm 0xc0018000"
#else
-#define CFG_MAPPED_RAM_BASE CFG_SDRAM_BASE
+#define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE
#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \
"bootm 0x50018000"
#endif
/* NAND U-Boot load and start address */
-#define CFG_UBOOT_BASE (CFG_MAPPED_RAM_BASE + 0x07e00000)
+#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_MAPPED_RAM_BASE + 0x07e00000)
#define CONFIG_ENV_OFFSET 0x0040000
/* NAND configuration */
-#define CFG_MAX_NAND_DEVICE 1
-#define CFG_NAND_BASE 0x70200010
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x70200010
#define NAND_MAX_CHIPS 1
-#define CFG_S3C_NAND_HWECC
+#define CONFIG_SYS_S3C_NAND_HWECC
-#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
-#define CFG_NAND_WP 1
-#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */
-#define CFG_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
+#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
+#define CONFIG_SYS_NAND_WP 1
+#define CONFIG_SYS_NAND_YAFFS_WRITE 1 /* support yaffs write */
+#define CONFIG_SYS_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
-#define CFG_NAND_U_BOOT_DST CFG_PHY_UBOOT_BASE /* NUB load-addr */
-#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* NUB start-addr */
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_PHY_UBOOT_BASE /* NUB load-addr */
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* NUB start-addr */
-#define CFG_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
-#define CFG_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
/* NAND chip page size */
-#define CFG_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
/* NAND chip block size */
-#define CFG_NAND_BLOCK_SIZE (128 * 1024)
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
/* NAND chip page per block count */
-#define CFG_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
/* Location of the bad-block label */
-#define CFG_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/* Extra address cycle for > 128MiB */
-#define CFG_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
-#define CFG_NAND_ECCSIZE CFG_NAND_PAGE_SIZE
+#define CONFIG_SYS_NAND_ECCSIZE CONFIG_SYS_NAND_PAGE_SIZE
/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
-#define CFG_NAND_ECCBYTES 4
+#define CONFIG_SYS_NAND_ECCBYTES 4
/* Number of ECC-blocks per NAND page */
-#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
/* Size of a single OOB region */
-#define CFG_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
/* Number of ECC bytes per page */
-#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
/* ECC byte positions */
-#define CFG_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
+#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
48, 49, 50, 51, 52, 53, 54, 55, \
56, 57, 58, 59, 60, 61, 62, 63}
@@ -290,10 +290,10 @@
#if !defined(CONFIG_ENABLE_MMU)
#define CONFIG_CMD_USB 1
#define CONFIG_USB_OHCI_NEW 1
-#define CFG_USB_OHCI_REGS_BASE 0x74300000
-#define CFG_USB_OHCI_SLOT_NAME "s3c6400"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
-#define CFG_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x74300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c6400"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
#define CONFIG_USB_STORAGE 1
OpenPOWER on IntegriCloud