diff options
Diffstat (limited to 'include/configs/gw8260.h')
| -rw-r--r-- | include/configs/gw8260.h | 248 |
1 files changed, 124 insertions, 124 deletions
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index e187764e2e..53a001d211 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -72,7 +72,7 @@ * 0x6 0x1 66 133 266 Close Close Open * 0x6 0x2 66 133 300 Close Open Close */ -#define CFG_SBC_MODCK_H 0x05 +#define CONFIG_SYS_SBC_MODCK_H 0x05 /* Define this if you want to boot from 0x00000100. If you don't define * this, you will need to program the bootloader to 0xfff00000, and @@ -80,48 +80,48 @@ * way to do that is to program the bootloader at both addresses. * It is suggested that you just let U-Boot live at 0x00000000. */ -#define CFG_SBC_BOOT_LOW 1 +#define CONFIG_SYS_SBC_BOOT_LOW 1 /* What should the base address of the main FLASH be and how big is * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk * The main FLASH is whichever is connected to *CS0. U-Boot expects * this to be the SIMM. */ -#define CFG_FLASH0_BASE 0x40000000 -#define CFG_FLASH0_SIZE 8 +#define CONFIG_SYS_FLASH0_BASE 0x40000000 +#define CONFIG_SYS_FLASH0_SIZE 8 -/* Define CFG_FLASH_CHECKSUM to enable flash checksum during boot. +/* Define CONFIG_SYS_FLASH_CHECKSUM to enable flash checksum during boot. * Note: the 'flashchecksum' environment variable must also be set to 'y'. */ -#define CFG_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_CHECKSUM /* What should be the base address of SDRAM DIMM and how big is * it (in Mbytes)? */ -#define CFG_SDRAM0_BASE 0x00000000 -#define CFG_SDRAM0_SIZE 64 +#define CONFIG_SYS_SDRAM0_BASE 0x00000000 +#define CONFIG_SYS_SDRAM0_SIZE 64 /* * DRAM tests - * CFG_DRAM_TEST - enables the following tests. + * CONFIG_SYS_DRAM_TEST - enables the following tests. * - * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines + * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines * Environment variable 'test_dram_data' must be * set to 'y'. - * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely + * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely * addressable. Environment variable * 'test_dram_address' must be set to 'y'. - * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. + * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. * This test takes about 6 minutes to test 64 MB. * Environment variable 'test_dram_walk' must be * set to 'y'. */ -#define CFG_DRAM_TEST -#if defined(CFG_DRAM_TEST) -#define CFG_DRAM_TEST_DATA -#define CFG_DRAM_TEST_ADDRESS -#define CFG_DRAM_TEST_WALK -#endif /* CFG_DRAM_TEST */ +#define CONFIG_SYS_DRAM_TEST +#if defined(CONFIG_SYS_DRAM_TEST) +#define CONFIG_SYS_DRAM_TEST_DATA +#define CONFIG_SYS_DRAM_TEST_ADDRESS +#define CONFIG_SYS_DRAM_TEST_WALK +#endif /* CONFIG_SYS_DRAM_TEST */ /* * GW8260 with 16 MB DIMM: @@ -140,10 +140,10 @@ * 0x00F5 FFB0 Board Info Data * 0x00F6 0000 Malloc Arena * : CONFIG_ENV_SECT_SIZE, 256k - * : CFG_MALLOC_LEN, 128k + * : CONFIG_SYS_MALLOC_LEN, 128k * 0x00FC 0000 RAM Copy of Monitor Code - * : CFG_MONITOR_LEN, 256k - * 0x00FF FFFF [End of RAM], CFG_SDRAM_SIZE - 1 + * : CONFIG_SYS_MONITOR_LEN, 256k + * 0x00FF FFFF [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1 */ /* @@ -163,10 +163,10 @@ * 0x03F5 FFB0 Board Info Data * 0x03F6 0000 Malloc Arena * : CONFIG_ENV_SECT_SIZE, 256k - * : CFG_MALLOC_LEN, 128k + * : CONFIG_SYS_MALLOC_LEN, 128k * 0x03FC 0000 RAM Copy of Monitor Code - * : CFG_MONITOR_LEN, 256k - * 0x03FF FFFF [End of RAM], CFG_SDRAM_SIZE - 1 + * : CONFIG_SYS_MONITOR_LEN, 256k + * 0x03FF FFFF [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1 */ @@ -233,10 +233,10 @@ * - Select bus for bd/buffers (see 28-13) * - Enable Full Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -# define CFG_CPMFCR_RAMTYPE 0 -# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) +# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) +# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +# define CONFIG_SYS_CPMFCR_RAMTYPE 0 +# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) @@ -246,10 +246,10 @@ * - Select bus for bd/buffers (see 28-13) * - Enable Full Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CFG_CPMFCR_RAMTYPE 0 -# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) +# define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) +# define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) +# define CONFIG_SYS_CPMFCR_RAMTYPE 0 +# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */ @@ -297,10 +297,10 @@ #define CONFIG_BOOTP_DNS /* undef this to save memory */ -#define CFG_LONGHELP +#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CFG_PROMPT "=> " +#define CONFIG_SYS_PROMPT "=> " /* @@ -319,16 +319,16 @@ /* Where do the internal registers live? */ -#define CFG_IMMR 0xf0000000 +#define CONFIG_SYS_IMMR 0xf0000000 /* Use the HUSH parser */ -#define CFG_HUSH_PARSER -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif /* What is the address of IO controller */ -#define CFG_IO_BASE 0xe0000000 +#define CONFIG_SYS_IO_BASE 0xe0000000 /***************************************************************************** * @@ -344,44 +344,44 @@ * Miscellaneous configurable options */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CFG_MAXARGS 8 /* max number of command args */ +#define CONFIG_SYS_MAXARGS 8 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ /* Convert clocks to MHZ when passing board info to kernel. * This must be defined for eariler 2.4 kernels (~2.4.4). */ #define CONFIG_CLOCKS_IN_MHZ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ /* memtest works from the end of the exception vector table * to the end of the DRAM less monitor and malloc area */ -#define CFG_MEMTEST_START 0x2000 +#define CONFIG_SYS_MEMTEST_START 0x2000 -#define CFG_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */ +#define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */ -#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \ - + CFG_MALLOC_LEN \ +#define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \ + + CONFIG_SYS_MALLOC_LEN \ + CONFIG_ENV_SECT_SIZE \ - + CFG_STACK_USAGE ) + + CONFIG_SYS_STACK_USAGE ) -#define CFG_MEMTEST_END ( CFG_SDRAM_SIZE * 1024 * 1024 \ - - CFG_MEM_END_USAGE ) +#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \ + - CONFIG_SYS_MEM_END_USAGE ) /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings @@ -389,98 +389,98 @@ * You should know what you are doing if you make changes here. */ -#define CFG_FLASH_BASE CFG_FLASH0_BASE -#define CFG_FLASH_SIZE CFG_FLASH0_SIZE -#define CFG_SDRAM_BASE CFG_SDRAM0_BASE -#define CFG_SDRAM_SIZE CFG_SDRAM0_SIZE +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE +#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM0_BASE +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM0_SIZE /*----------------------------------------------------------------------- * Hard Reset Configuration Words */ -#if defined(CFG_SBC_BOOT_LOW) -# define CFG_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS) +#if defined(CONFIG_SYS_SBC_BOOT_LOW) +# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS) #else -# define CFG_SBC_HRCW_BOOT_FLAGS (0) -#endif /* defined(CFG_SBC_BOOT_LOW) */ +# define CONFIG_SYS_SBC_HRCW_BOOT_FLAGS (0) +#endif /* defined(CONFIG_SYS_SBC_BOOT_LOW) */ -/* get the HRCW ISB field from CFG_IMMR */ -#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) | \ - ((CFG_IMMR & 0x01000000) >> 7) | \ - ((CFG_IMMR & 0x00100000) >> 4) ) +/* get the HRCW ISB field from CONFIG_SYS_IMMR */ +#define CONFIG_SYS_SBC_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \ + ((CONFIG_SYS_IMMR & 0x01000000) >> 7) | \ + ((CONFIG_SYS_IMMR & 0x00100000) >> 4) ) -#define CFG_HRCW_MASTER ( HRCW_BPS11 | \ +#define CONFIG_SYS_HRCW_MASTER ( HRCW_BPS11 | \ HRCW_DPPC11 | \ - CFG_SBC_HRCW_IMMR | \ + CONFIG_SYS_SBC_HRCW_IMMR | \ HRCW_MMR00 | \ HRCW_LBPC11 | \ HRCW_APPC10 | \ HRCW_CS10PC00 | \ - (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) | \ - CFG_SBC_HRCW_BOOT_FLAGS ) + (CONFIG_SYS_SBC_MODCK_H & HRCW_MODCK_H1111) | \ + CONFIG_SYS_SBC_HRCW_BOOT_FLAGS ) /* no slaves */ -#define CFG_HRCW_SLAVE1 0 -#define CFG_HRCW_SLAVE2 0 -#define CFG_HRCW_SLAVE3 0 -#define CFG_HRCW_SLAVE4 0 -#define CFG_HRCW_SLAVE5 0 -#define CFG_HRCW_SLAVE6 0 -#define CFG_HRCW_SLAVE7 0 +#define CONFIG_SYS_HRCW_SLAVE1 0 +#define CONFIG_SYS_HRCW_SLAVE2 0 +#define CONFIG_SYS_HRCW_SLAVE3 0 +#define CONFIG_SYS_HRCW_SLAVE4 0 +#define CONFIG_SYS_HRCW_SLAVE5 0 +#define CONFIG_SYS_HRCW_SLAVE6 0 +#define CONFIG_SYS_HRCW_SLAVE7 0 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 - * Note also that the logic that sets CFG_RAMBOOT is platform dependent. + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent. */ -#define CFG_MONITOR_BASE CFG_FLASH0_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH0_BASE -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 * 1024 * 1024) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ #define CONFIG_ENV_IS_IN_FLASH 1 #ifdef CONFIG_ENV_IN_OWN_SECT -# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + (256 * 1024)) +# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + (256 * 1024)) # define CONFIG_ENV_SECT_SIZE (256 * 1024) #else # define CONFIG_ENV_SIZE (16 * 1024)/* Size of Environment Sector */ -# define CONFIG_ENV_ADD ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CONFIG_ENV_SIZE) +# define CONFIG_ENV_ADD ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SIZE) # define CONFIG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size */ #endif /* CONFIG_ENV_IN_OWN_SECT */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -493,36 +493,36 @@ * * HID1 has only read-only information - nothing to set. */ -#define CFG_HID0_INIT (HID0_ICE |\ +#define CONFIG_SYS_HID0_INIT (HID0_ICE |\ HID0_DCE |\ HID0_ICFI |\ HID0_DCI |\ HID0_IFEM |\ HID0_ABE) -#define CFG_HID0_FINAL (HID0_ICE |\ +#define CONFIG_SYS_HID0_FINAL (HID0_ICE |\ HID0_IFEM |\ HID0_ABE |\ HID0_EMCP) -#define CFG_HID2 0 +#define CONFIG_SYS_HID2 0 /*----------------------------------------------------------------------- * RMR - Reset Mode Register *----------------------------------------------------------------------- */ -#define CFG_RMR 0 +#define CONFIG_SYS_RMR 0 /*----------------------------------------------------------------------- * BCR - Bus Configuration 4-25 *----------------------------------------------------------------------- */ -#define CFG_BCR (BCR_ETM) +#define CONFIG_SYS_BCR (BCR_ETM) /*----------------------------------------------------------------------- * SIUMCR - SIU Module Configuration 4-31 *----------------------------------------------------------------------- */ -#define CFG_SIUMCR (SIUMCR_DPPC11 |\ +#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC11 |\ SIUMCR_L2CPC00 |\ SIUMCR_APPC10 |\ SIUMCR_MMR00) @@ -534,7 +534,7 @@ *----------------------------------------------------------------------- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable */ -#define CFG_SYPCR (SYPCR_SWTC |\ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC |\ SYPCR_BMT |\ SYPCR_PBME |\ SYPCR_LBME |\ @@ -547,7 +547,7 @@ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, * and enable Time Counter */ -#define CFG_TMCNTSC (TMCNTSC_SEC |\ +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\ TMCNTSC_ALR |\ TMCNTSC_TCF |\ TMCNTSC_TCE) @@ -558,7 +558,7 @@ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable * Periodic timer */ -#define CFG_PISCR (PISCR_PS |\ +#define CONFIG_SYS_PISCR (PISCR_PS |\ PISCR_PTF |\ PISCR_PTE) @@ -566,13 +566,13 @@ * SCCR - System Clock Control 9-8 *----------------------------------------------------------------------- */ -#define CFG_SCCR 0 +#define CONFIG_SYS_SCCR 0 /*----------------------------------------------------------------------- * RCCR - RISC Controller Configuration 13-7 *----------------------------------------------------------------------- */ -#define CFG_RCCR 0 +#define CONFIG_SYS_RCCR 0 /* * Initialize Memory Controller: @@ -618,7 +618,7 @@ * - No data pipelining is done * - Valid */ -#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\ BRx_PS_32 |\ BRx_MS_GPCM_P |\ BRx_V) @@ -637,7 +637,7 @@ * - One idle clock is inserted between a read access from the * current bank and the next access. */ -#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\ +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\ ORxG_CSNT |\ ORxG_ACS_DIV1 |\ ORxG_SCY_5_CLK |\ @@ -673,7 +673,7 @@ * - No data pipelining is done * - Valid */ -#define CFG_BR2_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\ BRx_PS_64 |\ BRx_MS_SDRAM_P |\ BRx_V) @@ -687,8 +687,8 @@ * - Back-to-back page mode * - Internal bank interleaving within save device enabled */ -#if (CFG_SDRAM0_SIZE == 16) -#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\ +#if (CONFIG_SYS_SDRAM0_SIZE == 16) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\ ORxS_BPD_2 |\ ORxS_ROWST_PBI0_A9 |\ ORxS_NUMR_11) @@ -716,7 +716,7 @@ * Ref: Section 10.3.3 on page 10-21 *----------------------------------------------------------------------- */ -#define CFG_PSDMR (PSDMR_RFEN |\ +#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\ PSDMR_SDAM_A14_IS_A5 |\ PSDMR_BSMA_A16_A18 |\ PSDMR_SDA10_PBI0_A9 |\ @@ -726,7 +726,7 @@ PSDMR_LDOTOPRE_1C |\ PSDMR_WRC_1C |\ PSDMR_CL_2) -#endif /* (CFG_SDRAM0_SIZE == 16) */ +#endif /* (CONFIG_SYS_SDRAM0_SIZE == 16) */ /* With a 64 MB DIMM, the OR2 is configured as follows: * @@ -737,8 +737,8 @@ * - Back-to-back page mode * - Internal bank interleaving within save device enabled */ -#if (CFG_SDRAM0_SIZE == 64) -#define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\ +#if (CONFIG_SYS_SDRAM0_SIZE == 64) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\ ORxS_BPD_4 |\ ORxS_ROWST_PBI0_A8 |\ ORxS_NUMR_12) @@ -766,7 +766,7 @@ * Ref: Section 10.3.3 on page 10-21 *----------------------------------------------------------------------- */ -#define CFG_PSDMR (PSDMR_RFEN |\ +#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\ PSDMR_SDAM_A14_IS_A5 |\ PSDMR_BSMA_A14_A16 |\ PSDMR_SDA10_PBI0_A9 |\ @@ -776,10 +776,10 @@ PSDMR_LDOTOPRE_1C |\ PSDMR_WRC_1C |\ PSDMR_CL_2) -#endif /* (CFG_SDRAM0_SIZE == 64) */ +#endif /* (CONFIG_SYS_SDRAM0_SIZE == 64) */ -#define CFG_PSRT 0x0e -#define CFG_MPTPR MPTPR_PTP_DIV32 +#define CONFIG_SYS_PSRT 0x0e +#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /*----------------------------------------------------------------------- @@ -804,16 +804,16 @@ * - 11 wait states */ -#ifdef CFG_IO_BASE -# define CFG_BR4_PRELIM ((CFG_IO_BASE & BRx_BA_MSK) |\ +#ifdef CONFIG_SYS_IO_BASE +# define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_IO_BASE & BRx_BA_MSK) |\ BRx_PS_8 |\ BRx_MS_GPCM_L |\ BRx_V) -# define CFG_OR4_PRELIM (ORxG_AM_MSK |\ +# define CONFIG_SYS_OR4_PRELIM (ORxG_AM_MSK |\ ORxG_SCY_11_CLK |\ ORxG_EHTR) -#endif /* CFG_IO_BASE */ +#endif /* CONFIG_SYS_IO_BASE */ /* * Internal Definitions |
