diff options
Diffstat (limited to 'include/configs/grsim.h')
| -rw-r--r-- | include/configs/grsim.h | 88 |
1 files changed, 61 insertions, 27 deletions
diff --git a/include/configs/grsim.h b/include/configs/grsim.h index f54919eaae..e1f7dc3bf6 100644 --- a/include/configs/grsim.h +++ b/include/configs/grsim.h @@ -19,9 +19,13 @@ * * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1. * - * TSIM command - * tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu + * TSIM command: + * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas * + * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are + * hard-coded to these values and need not be specified. (see below) + * + * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators */ #define CONFIG_GRSIM 0 /* ... not running on GRSIM */ @@ -47,7 +51,6 @@ /* * Supported commands */ -#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */ #define CONFIG_CMD_DIAG #define CONFIG_CMD_FPGA_LOADMK #define CONFIG_CMD_IRQ @@ -184,18 +187,18 @@ /* * Memory map */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 0x02000000 -#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE) +#define CONFIG_SYS_SDRAM_BASE 0x60000000 +#define CONFIG_SYS_SDRAM_SIZE 0x02000000 /* 32MiB SDRAM */ +#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE) -/* no SRAM available */ -#undef CONFIG_SYS_SRAM_BASE -#undef CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_SRAM_BASE 0x40000000 +#define CONFIG_SYS_SRAM_SIZE 0x00400000 /* 4MiB SRAM */ +#define CONFIG_SYS_SRAM_END (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE) /* Always Run U-Boot from SDRAM */ -#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE -#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END +#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE +#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE) @@ -224,6 +227,7 @@ /* make un relocated address from relocated address */ #define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)) +#ifdef CONFIG_CMD_NET /* * Ethernet configuration */ @@ -235,6 +239,8 @@ /* #define CONFIG_GRETH_10MBIT 1 */ #define CONFIG_PHY_ADDR 0x00 +#endif /* CONFIG_CMD_NET */ + /* * Miscellaneous configurable options */ @@ -255,37 +261,65 @@ /***** Gaisler GRLIB IP-Cores Config ********/ -/* AMBA Plug & Play info display on startup */ -/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/ - #define CONFIG_SYS_GRLIB_SDRAM 0 + #define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11)) + +/* No SDRAM Configuration */ +#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1 + +/* LEON2 MCTRL configuration */ +#define CONFIG_SYS_GRLIB_ESA_MCTRL1 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11)) #if CONFIG_GRSIM /* GRSIM configuration */ -#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000 #else /* TSIM configuration */ -#define CONFIG_SYS_GRLIB_MEMCFG2 0x00001820 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x81805220 #endif -#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000 +#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000 -#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11)) -#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000 -#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000 +/* GRLIB FT-MCTRL configuration */ +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11)) +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000 +#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000 /* no DDR controller */ -#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000 +#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1 /* no DDR2 Controller */ -#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000 -#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000 - -#define CONFIG_SYS_GRLIB_APBUART_SCALER \ - ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10) +#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1 /* default kernel command line */ #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" #define CONFIG_IDENT_STRING "Gaisler GRSIM" +/* TSIM command: + * $ ./tsim-leon3 -mmu -cas + * + * This TSIM evaluation version will expire 2015-04-02 + * + * + * TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version) + * + * Copyright (C) 2014, Aeroflex Gaisler - all rights reserved. + * This software may only be used with a valid license. + * For latest updates, go to http://www.gaisler.com/ + * Comments or bug-reports to support@gaisler.com + * + * serial port A on stdin/stdout + * allocated 4096 K SRAM memory, in 1 bank + * allocated 32 M SDRAM memory, in 1 bank + * allocated 2048 K ROM memory + * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total) + * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total) + * tsim> leon + * 0x80000000 Memory configuration register 1 0x000002ff + * 0x80000004 Memory configuration register 2 0x81805220 + * 0x80000008 Memory configuration register 3 0x00000000 + */ + #endif /* __CONFIG_H */ |
