diff options
Diffstat (limited to 'include/configs/beagle_x15.h')
| -rw-r--r-- | include/configs/beagle_x15.h | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h new file mode 100644 index 0000000000..cc36330938 --- /dev/null +++ b/include/configs/beagle_x15.h @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2014 + * Texas Instruments Incorporated. + * Felipe Balbi <balbi@ti.com> + * + * Configuration settings for the TI Beagle x15 board. + * See ti_omap5_common.h for omap5 common settings. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_BEAGLE_X15_H +#define __CONFIG_BEAGLE_X15_H + +#define CONFIG_AM57XX + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_ENV_SIZE (64 << 10) +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" + +#define CONFIG_CMD_SAVEENV + +#define CONSOLEDEV "ttyO2" +#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */ +#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_OMAP_ABE_SYSCK + +/* Define the default GPT table for eMMC */ +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}" + +#include <configs/ti_omap5_common.h> + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + +/* CPSW Ethernet */ +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ +#define CONFIG_PHY_GIGE /* per-board part of CPSW */ +#define CONFIG_PHYLIB + +#define CONFIG_SUPPORT_EMMC_BOOT + +/* USB xHCI HOST */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_XHCI +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_OMAP_USB3PHY1_HOST + +/* SATA */ +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) + +#endif /* __CONFIG_BEAGLE_X5_H */ |
