diff options
Diffstat (limited to 'include/configs/ap325rxa.h')
| -rw-r--r-- | include/configs/ap325rxa.h | 96 |
1 files changed, 48 insertions, 48 deletions
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index a6312b59ea..9134ad1dc4 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -63,19 +63,19 @@ #define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) /* undef to save memory */ -#define CFG_LONGHELP +#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ -#define CFG_PROMPT "=> " +#define CONFIG_SYS_PROMPT "=> " /* Buffer size for input from the Console */ -#define CFG_CBSIZE 256 +#define CONFIG_SYS_CBSIZE 256 /* Buffer size for Console output */ -#define CFG_PBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 /* max args accepted for monitor commands */ -#define CFG_MAXARGS 16 +#define CONFIG_SYS_MAXARGS 16 /* Buffer size for Boot Arguments passed to kernel */ -#define CFG_BARGSIZE 512 +#define CONFIG_SYS_BARGSIZE 512 /* List of legal baudrate settings for this board */ -#define CFG_BAUDRATE_TABLE { 38400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 38400 } /* SCIF */ #define CONFIG_SCIF_CONSOLE 1 @@ -83,94 +83,94 @@ #define CONFIG_CONS_SCIF5 1 /* Suppress display of console information at boot */ -#undef CFG_CONSOLE_INFO_QUIET -#undef CFG_CONSOLE_OVERWRITE_ROUTINE -#undef CFG_CONSOLE_ENV_OVERWRITE +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE -#define CFG_MEMTEST_START (AP325RXA_SDRAM_BASE) -#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) /* Enable alternate, more extensive, memory test */ -#undef CFG_ALT_MEMTEST +#undef CONFIG_SYS_ALT_MEMTEST /* Scratch address used by the alternate memory test */ -#undef CFG_MEMTEST_SCRATCH +#undef CONFIG_SYS_MEMTEST_SCRATCH /* Enable temporary baudrate change while serial download */ -#undef CFG_LOADS_BAUD_CHANGE +#undef CONFIG_SYS_LOADS_BAUD_CHANGE -#define CFG_SDRAM_BASE (AP325RXA_SDRAM_BASE) +#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE) /* maybe more, but if so u-boot doesn't know about it... */ -#define CFG_SDRAM_SIZE (128 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* default load address for scripts ?!? */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CFG_MONITOR_BASE (AP325RXA_FLASH_BASE_1) +#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1) /* Monitor size */ -#define CFG_MONITOR_LEN (128 * 1024) +#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CFG_MALLOC_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_SIZE (256) -#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE (256) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* FLASH */ #define CONFIG_FLASH_CFI_DRIVER 1 -#define CFG_FLASH_CFI -#undef CFG_FLASH_QUIET_TEST +#define CONFIG_SYS_FLASH_CFI +#undef CONFIG_SYS_FLASH_QUIET_TEST /* print 'E' for empty sector on flinfo */ -#define CFG_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_EMPTY_INFO /* Physical start address of Flash memory */ -#define CFG_FLASH_BASE (AP325RXA_FLASH_BASE_1) +#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1) /* Max number of sectors on each Flash chip */ -#define CFG_MAX_FLASH_SECT 512 +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* * IDE support */ #define CONFIG_IDE_RESET 1 -#define CFG_PIO_MODE 1 -#define CFG_IDE_MAXBUS 1 /* IDE bus */ -#define CFG_IDE_MAXDEVICE 1 -#define CFG_ATA_BASE_ADDR 0xB4180000 -#define CFG_ATA_STRIDE 2 /* 1bit shift */ -#define CFG_ATA_DATA_OFFSET 0x200 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0x200 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x210 /* alternate register offset */ +#define CONFIG_SYS_PIO_MODE 1 +#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000 +#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */ /* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} /* Timeout for Flash erase operations (in ms) */ -#define CFG_FLASH_ERASE_TOUT (3 * 1000) +#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ -#define CFG_FLASH_WRITE_TOUT (3 * 1000) +#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ -#define CFG_FLASH_LOCK_TOUT (3 * 1000) +#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) +#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* * Use hardware flash sectors protection instead * of U-Boot software protection */ -#undef CFG_FLASH_PROTECTION -#undef CFG_DIRECT_FLASH_TFTP +#undef CONFIG_SYS_FLASH_PROTECTION +#undef CONFIG_SYS_DIRECT_FLASH_TFTP /* ENV setting */ #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_ENV_SECT_SIZE (128 * 1024) #define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) -/* Offset of env Flash sector relative to CFG_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_FLASH_BASE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) +/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ +#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) /* Board Clock */ #define CONFIG_SYS_CLK_FREQ 33333333 #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ -#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) #endif /* __AP325RXA_H */ |
