diff options
Diffstat (limited to 'include/configs/TOP860.h')
| -rw-r--r-- | include/configs/TOP860.h | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h deleted file mode 100644 index da68503a69..0000000000 --- a/include/configs/TOP860.h +++ /dev/null @@ -1,409 +0,0 @@ -/* - * (C) Copyright 2003 - * EMK Elektronik GmbH <www.emk-elektronik.de> - * Reinhard Meyer <r.meyer@emk-elektronik.de> - * - * Configuation settings for the TOP860 board. - * - * ----------------------------------------------------------------- - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * TOP860 is a simple module: - * 16-bit wide FLASH on CS0 (2MB or more) - * 32-bit wide DRAM on CS2 (either 4MB or 16MB) - * FEC with Am79C874 100-Base-T and Fiber Optic - * Ports available, but we choose SMC1 for Console - * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set - * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock - * - * This config has been copied from MBX.h / MBX860T.h - */ -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -/*----------------------------------------------------------------------- - * CPU and BOARD type - */ -#define CONFIG_MPC860 1 /* This is a MPC860 CPU */ -#define CONFIG_MPC860T 1 /* even better... an FEC! */ -#define CONFIG_TOP860 1 /* ...on a TOP860 module */ - -#define CONFIG_SYS_TEXT_BASE 0x80000000 - -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_IDENT_STRING " EMK TOP860" - -/*----------------------------------------------------------------------- - * CLOCK settings - */ -#define CONFIG_SYSCLK 49152000 -#define CONFIG_SYS_XTAL 32768 -#define CONFIG_EBDF 1 -#define CONFIG_COM 3 -#define CONFIG_RTC_MPC8xx - -/*----------------------------------------------------------------------- - * Physical memory map as defined by EMK - */ -#define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register */ -#define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH in final mapping */ -#define CONFIG_SYS_DRAM_BASE 0x00000000 /* DRAM in final mapping */ -#define CONFIG_SYS_FLASH_MAX 0x00400000 /* max FLASH to expect */ -#define CONFIG_SYS_DRAM_MAX 0x01000000 /* max DRAM to expect */ - -/*----------------------------------------------------------------------- - * derived values - */ -#define CONFIG_SYS_MF (CONFIG_SYSCLK/CONFIG_SYS_XTAL) -#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK -#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK -#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF) -#define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_CFI - -/*----------------------------------------------------------------------- - * Command interpreter - */ -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#define CONFIG_BAUDRATE 9600 - -/* - * Allow partial commands to be matched to uniqueness. - */ -#define CONFIG_SYS_MATCH_PARTIAL_CMD - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE -#define CONFIG_CMD_MII -#define CONFIG_CMD_BEDBUG - - -#define CONFIG_SOURCE 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 -#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */ - - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */ - - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/*----------------------------------------------------------------------- - * Memory Test Command - */ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Environment handler - * only the first 6k in EEPROM are available for user. Of that we use 256b - */ -#define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */ -#define CONFIG_ENV_OFFSET 0x1000 -#define CONFIG_ENV_SIZE 0x0700 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_FACT_OFFSET 0x1800 -#define CONFIG_SYS_FACT_SIZE 0x0800 -#define CONFIG_SYS_I2C_FACT_ADDR 0x57 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_SIZE 0x2000 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 -#define CONFIG_ENV_OVERWRITE -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 100000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/**/ -#define SDA 0x00010 -#define SCL 0x00020 -#define __I2C_DIR immr->im_cpm.cp_pbdir -#define __I2C_DAT immr->im_cpm.cp_pbdat -#define __I2C_PAR immr->im_cpm.cp_pbpar -#define __I2C_ODR immr->im_cpm.cp_pbodr -#define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ - __I2C_ODR &= ~(SDA|SCL); \ - __I2C_DAT |= (SDA|SCL); \ - __I2C_DIR|=(SDA|SCL); } -#define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) -#define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; } -#define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; } -#define I2C_DELAY { udelay(5); } -#define I2C_ACTIVE { __I2C_DIR |= SDA; } -#define I2C_TRISTATE { __I2C_DIR &= ~SDA; } - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/*----------------------------------------------------------------------- - * defines we need to get FEC running - */ -#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */ -#define FEC_ENET 1 /* eth.c needs it that way... */ -#define CONFIG_SYS_DISCOVER_PHY 1 -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_PHY_ADDR 31 - -/*----------------------------------------------------------------------- - * adresses - */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x80000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */ -#define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8) - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -/*----------------------------------------------------------------------- - * Debug Enable Register - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 /* used in start.S */ - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set up PLPRCR (PLL, Low-Power, and Reset Control Register) - * 12 MF calculated Multiplication factor - * 4 0 0000 - * 1 SPLSS 0 System PLL lock status sticky - * 1 TEXPS 1 Timer expired status - * 1 0 0 - * 1 TMIST 0 Timers interrupt status - * 1 0 0 - * 1 CSRC 0 Clock source (0=DFNH, 1=DFNL) - * 2 LPM 00 Low-power modes - * 1 CSR 0 Checkstop reset enable - * 1 LOLRE 0 Loss-of-lock reset enable - * 1 FIOPD 0 Force I/O pull down - * 5 0 00000 - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20)) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * set up SYPCR: - * 16 SWTC 0xffff Software watchdog timer count - * 8 BMT 0xff Bus monitor timing - * 1 BME 1 Bus monitor enable - * 3 0 000 - * 1 SWF 1 Software watchdog freeze - * 1 SWE 0/1 Software watchdog enable - * 1 SWRI 0/1 Software watchdog reset/interrupt select (1=HRESET) - * 1 SWP 0/1 Software watchdog prescale (1=/2048) - */ -#if defined (CONFIG_WATCHDOG) - #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else - #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * set up SIUMCR - * 1 EARB 0 External arbitration - * 3 EARP 000 External arbitration request priority - * 4 0 0000 - * 1 DSHW 0 Data show cycles - * 2 DBGC 00 Debug pin configuration - * 2 DBPC 00 Debug port pins configuration - * 1 0 0 - * 1 FRC 0 FRZ pin configuration - * 1 DLK 0 Debug register lock - * 1 OPAR 0 Odd parity - * 1 PNCS 0 Parity enable for non memory controller regions - * 1 DPC 0 Data parity pins configuration - * 1 MPRE 0 Multiprocessor reservation enable - * 2 MLRC 11 Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT) - * 1 AEME 0 Async external master enable - * 1 SEME 0 Sync external master enable - * 1 BSC 0 Byte strobe configuration - * 1 GB5E 0 GPL_B5 enable - * 1 B2DD 0 Bank 2 double drive - * 1 B3DD 0 Bank 3 double drive - * 4 0 0000 - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC11) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * set up SCCR (System Clock and Reset Control Register) - * 1 0 0 - * 2 COM 11 Clock output module (00=full, 01=half, 11=off) - * 3 0 000 - * 1 TBS 1 Timebase source (0=OSCCLK, 1=GCLK2) - * 1 RTDIV 0 Real-time clock divide (0=/4, 1=/512) - * 1 RTSEL 0 Real-time clock select (0=OSCM, 1=EXTCLK) - * 1 CRQEN 0 CPM request enable - * 1 PRQEN 0 Power management request enable - * 2 0 00 - * 2 EBDF xx External bus division factor - * 2 0 00 - * 2 DFSYNC 00 Division factor for SYNCLK - * 2 DFBRG 00 Division factor for BRGCLK - * 3 DFNL 000 Division factor low frequency - * 3 DFNH 000 Division factor high frequency - * 5 0 00000 - */ -#define SCCR_MASK 0 -#ifdef CONFIG_EBDF - #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01) -#else - #define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS) -#endif - -/*----------------------------------------------------------------------- - * Chip Select 0 - FLASH - *----------------------------------------------------------------------- - * Preliminary Values - */ -/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR) -#define CONFIG_SYS_OR0_PRELIM (-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V ) - -/*----------------------------------------------------------------------- - * misc - *----------------------------------------------------------------------- - * - */ -/* - * Set the autoboot delay in seconds. A delay of -1 disables autoboot - */ -#define CONFIG_BOOTDELAY 5 - -/* - * Pass the clock frequency to the Linux kernel in units of MHz - */ -#define CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_PREBOOT \ - "echo;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Set default IP stuff just to get bootstrap entries into the - * environment so that we can source the full default environment. - */ -#define CONFIG_ETHADDR 9a:52:63:15:85:25 -#define CONFIG_SERVERIP 10.0.4.200 -#define CONFIG_IPADDR 10.0.4.111 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#endif /* __CONFIG_H */ |
