diff options
Diffstat (limited to 'include/configs/ELPPC.h')
| -rw-r--r-- | include/configs/ELPPC.h | 204 |
1 files changed, 102 insertions, 102 deletions
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h index 08e3d71134..79392668e0 100644 --- a/include/configs/ELPPC.h +++ b/include/configs/ELPPC.h @@ -63,7 +63,7 @@ "bootm" #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ /* * BOOTP options @@ -88,8 +88,8 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ /* * choose between COM1 and COM2 as serial console @@ -97,72 +97,72 @@ #define CONFIG_CONS_INDEX 1 #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ -#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CFG_HZ 1000 /* dec. freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CFG_BOARD_ASM_INIT +#define CONFIG_SYS_BOARD_ASM_INIT #define CONFIG_MISC_INIT_R /* * Address mapping scheme for the MPC107 mem controller is mapping B (CHRP) */ -#undef CFG_ADDRESS_MAP_A +#undef CONFIG_SYS_ADDRESS_MAP_A -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7d000000 +#define CONFIG_SYS_PCI_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xfd000000 -#define CFG_ISA_MEM_SIZE 0x01000000 +#define CONFIG_SYS_ISA_MEM_BUS 0x00000000 +#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000 +#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xfe800000 -#define CFG_PCI_IO_SIZE 0x00400000 +#define CONFIG_SYS_PCI_IO_BUS 0x00800000 +#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000 +#define CONFIG_SYS_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xfe000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CONFIG_SYS_ISA_IO_BUS 0x00000000 +#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000 +#define CONFIG_SYS_ISA_IO_SIZE 0x00800000 /* driver defines FDC,IDE,... */ -#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS +#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS +#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS /* * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CFG_USR_LED_BASE 0x78000000 -#define CFG_NVRAM_BASE 0xff000000 -#define CFG_UART_BASE 0xff400000 -#define CFG_FLASH_BASE 0xfff00000 +#define CONFIG_SYS_USR_LED_BASE 0x78000000 +#define CONFIG_SYS_NVRAM_BASE 0xff000000 +#define CONFIG_SYS_UART_BASE 0xff400000 +#define CONFIG_SYS_FLASH_BASE 0xfff00000 #define MPC107_EUMB_ADDR 0xfce00000 #define MPC107_EUMB_PI 0xfce41090 @@ -173,11 +173,11 @@ /* * Definitions for initial stack pointer and data area */ -#define CFG_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ +#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Flash mapping/organization on the MPC10x. @@ -185,11 +185,11 @@ #define FLASH_BASE0_PRELIM 0xff800000 #define FLASH_BASE1_PRELIM 0xffc00000 -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /* * JFFS2 partitions @@ -209,33 +209,33 @@ #define MTDPARTS_DEFAULT "mtdparts=elppc-0:-(jffs2),elppc-1:-(user)" */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ -#undef CFG_MEMTEST +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ +#undef CONFIG_SYS_MEMTEST /* * Environment settings */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CFG_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */ +#define CONFIG_SYS_NVRAM_SIZE 0x800 /* NVRAM size (2kB) */ #define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */ #define CONFIG_ENV_ADDR 0x0 #define CONFIG_ENV_MAP_ADRS 0xff000000 -#define CFG_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) -#define CFG_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */ -#define CFG_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ +#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) +#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* only byte accsess alowed */ +#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ /* * Serial devices */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK 24000000 -#define CFG_NS16550_COM1 (CFG_UART_BASE + 0) -#define CFG_NS16550_COM2 (CFG_UART_BASE + 8) +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 24000000 +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_UART_BASE + 0) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_UART_BASE + 8) /* * PCI stuff @@ -263,74 +263,74 @@ */ #if 1 -#define CFG_IBAT0L 0 -#define CFG_IBAT0U 0 -#define CFG_DBAT0L CFG_IBAT1L -#define CFG_DBAT0U CFG_IBAT1U +#define CONFIG_SYS_IBAT0L 0 +#define CONFIG_SYS_IBAT0U 0 +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U -#define CFG_IBAT1L 0 -#define CFG_IBAT1U 0 -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L 0 +#define CONFIG_SYS_IBAT1U 0 +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CFG_IBAT2L 0 -#define CFG_IBAT2U 0 -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U +#define CONFIG_SYS_IBAT2L 0 +#define CONFIG_SYS_IBAT2U 0 +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CFG_IBAT3L 0 -#define CFG_IBAT3U 0 -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L 0 +#define CONFIG_SYS_IBAT3U 0 +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #else /* SDRAM */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT0L CFG_IBAT1L -#define CFG_DBAT0U CFG_IBAT1U +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U /* address range for flashes */ -#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* ISA IO space */ -#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U /* ISA memory space */ -#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #endif /* * Speed settings are board specific */ -#define CFG_BUS_HZ 100000000 -#define CFG_CPU_CLK 400000000 -#define CFG_BUS_CLK CFG_BUS_HZ +#define CONFIG_SYS_BUS_HZ 100000000 +#define CONFIG_SYS_CPU_CLK 400000000 +#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* @@ -338,7 +338,7 @@ * look in include/74xx_7xx.h for the defines used here */ -#define CFG_L2 +#define CONFIG_SYS_L2 #if 1 #define L2_INIT 0 /* cpu 750 CXe*/ @@ -358,7 +358,7 @@ #define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_EEPRO100_SROM_WRITE #endif /* __CONFIG_H */ |
