diff options
Diffstat (limited to 'drivers')
113 files changed, 11134 insertions, 2801 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index d8361d95fd..33227c8bd6 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -19,3 +19,5 @@ obj-$(CONFIG_QE) += qe/ obj-y += memory/ obj-y += pwm/ obj-y += input/ +# SOC specific infrastructure drivers. +obj-y += soc/ diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index 574bc40b10..e54d564bf7 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -12,7 +12,7 @@ #if defined(CONFIG_ORION5X) #include <asm/arch/orion5x.h> #elif defined(CONFIG_KIRKWOOD) -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #endif /* SATA port registers */ diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index e69de29bb2..d2799dc861 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -0,0 +1,6 @@ +config DM + bool "Enable Driver Model" + depends on !SPL_BUILD + help + This config option enables Driver Model. + To use legacy drivers, say N. diff --git a/drivers/core/Makefile b/drivers/core/Makefile index c7905b1440..151c2398a4 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -5,3 +5,4 @@ # obj-y := device.o lists.o root.o uclass.o util.o +obj-$(CONFIG_OF_CONTROL) += simple-bus.o diff --git a/drivers/core/device.c b/drivers/core/device.c index 32e80e82b5..49faa29dc1 100644 --- a/drivers/core/device.c +++ b/drivers/core/device.c @@ -232,7 +232,7 @@ static void device_free(struct udevice *dev) } } -int device_probe(struct udevice *dev) +int device_probe_child(struct udevice *dev, void *parent_priv) { struct driver *drv; int size = 0; @@ -282,6 +282,8 @@ int device_probe(struct udevice *dev) ret = -ENOMEM; goto fail; } + if (parent_priv) + memcpy(dev->parent_priv, parent_priv, size); } ret = device_probe(dev->parent); @@ -335,6 +337,11 @@ fail: return ret; } +int device_probe(struct udevice *dev) +{ + return device_probe_child(dev, NULL); +} + int device_remove(struct udevice *dev) { struct driver *drv; @@ -514,3 +521,30 @@ int device_get_child_by_of_offset(struct udevice *parent, int seq, ret = device_find_child_by_of_offset(parent, seq, &dev); return device_get_device_tail(dev, ret, devp); } + +int device_find_first_child(struct udevice *parent, struct udevice **devp) +{ + if (list_empty(&parent->child_head)) { + *devp = NULL; + } else { + *devp = list_first_entry(&parent->child_head, struct udevice, + sibling_node); + } + + return 0; +} + +int device_find_next_child(struct udevice **devp) +{ + struct udevice *dev = *devp; + struct udevice *parent = dev->parent; + + if (list_is_last(&dev->sibling_node, &parent->child_head)) { + *devp = NULL; + } else { + *devp = list_entry(dev->sibling_node.next, struct udevice, + sibling_node); + } + + return 0; +} diff --git a/drivers/core/lists.c b/drivers/core/lists.c index 699f94b435..3a1ea85654 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -24,19 +24,12 @@ struct driver *lists_driver_lookup_name(const char *name) ll_entry_start(struct driver, driver); const int n_ents = ll_entry_count(struct driver, driver); struct driver *entry; - int len; if (!drv || !n_ents) return NULL; - len = strlen(name); - for (entry = drv; entry != drv + n_ents; entry++) { - if (strncmp(name, entry->name, len)) - continue; - - /* Full match */ - if (len == strlen(entry->name)) + if (!strcmp(name, entry->name)) return entry; } diff --git a/drivers/core/simple-bus.c b/drivers/core/simple-bus.c new file mode 100644 index 0000000000..3ea4d8230b --- /dev/null +++ b/drivers/core/simple-bus.c @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <dm/root.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int simple_bus_post_bind(struct udevice *dev) +{ + return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); +} + +UCLASS_DRIVER(simple_bus) = { + .id = UCLASS_SIMPLE_BUS, + .name = "simple_bus", + .post_bind = simple_bus_post_bind, +}; + +static const struct udevice_id generic_simple_bus_ids[] = { + { .compatible = "simple-bus" }, + { } +}; + +U_BOOT_DRIVER(simple_bus_drv) = { + .name = "generic_simple_bus", + .id = UCLASS_SIMPLE_BUS, + .of_match = generic_simple_bus_ids, +}; diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 61ca17e564..901b06ed2b 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -60,10 +60,6 @@ static int uclass_add(enum uclass_id id, struct uclass **ucp) id); return -ENOENT; } - if (uc_drv->ops) { - dm_warn("No ops for uclass id %d\n", id); - return -EINVAL; - } uc = calloc(1, sizeof(*uc)); if (!uc) return -ENOMEM; diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index b8077953c5..7b79237181 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -6,3 +6,4 @@ # obj-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o +obj-y += fsl/ diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile new file mode 100644 index 0000000000..cb13d2e0ae --- /dev/null +++ b/drivers/crypto/fsl/Makefile @@ -0,0 +1,10 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# Version 2 as published by the Free Software Foundation. +# + +obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o +obj-$(CONFIG_CMD_BLOB) += fsl_blob.o diff --git a/drivers/crypto/fsl/desc.h b/drivers/crypto/fsl/desc.h new file mode 100644 index 0000000000..504f2b07d0 --- /dev/null +++ b/drivers/crypto/fsl/desc.h @@ -0,0 +1,651 @@ +/* + * CAAM descriptor composition header + * Definitions to support CAAM descriptor instruction generation + * + * Copyright 2008-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Based on desc.h file in linux drivers/crypto/caam + */ + +#ifndef DESC_H +#define DESC_H + +/* Max size of any CAAM descriptor in 32-bit words, inclusive of header */ +#define MAX_CAAM_DESCSIZE 64 + +/* Block size of any entity covered/uncovered with a KEK/TKEK */ +#define KEK_BLOCKSIZE 16 +/* + * Supported descriptor command types as they show up + * inside a descriptor command word. + */ +#define CMD_SHIFT 27 +#define CMD_MASK 0xf8000000 + +#define CMD_KEY (0x00 << CMD_SHIFT) +#define CMD_SEQ_KEY (0x01 << CMD_SHIFT) +#define CMD_LOAD (0x02 << CMD_SHIFT) +#define CMD_SEQ_LOAD (0x03 << CMD_SHIFT) +#define CMD_FIFO_LOAD (0x04 << CMD_SHIFT) +#define CMD_SEQ_FIFO_LOAD (0x05 << CMD_SHIFT) +#define CMD_STORE (0x0a << CMD_SHIFT) +#define CMD_SEQ_STORE (0x0b << CMD_SHIFT) +#define CMD_FIFO_STORE (0x0c << CMD_SHIFT) +#define CMD_SEQ_FIFO_STORE (0x0d << CMD_SHIFT) +#define CMD_MOVE_LEN (0x0e << CMD_SHIFT) +#define CMD_MOVE (0x0f << CMD_SHIFT) +#define CMD_OPERATION (0x10 << CMD_SHIFT) +#define CMD_SIGNATURE (0x12 << CMD_SHIFT) +#define CMD_JUMP (0x14 << CMD_SHIFT) +#define CMD_MATH (0x15 << CMD_SHIFT) +#define CMD_DESC_HDR (0x16 << CMD_SHIFT) +#define CMD_SHARED_DESC_HDR (0x17 << CMD_SHIFT) +#define CMD_SEQ_IN_PTR (0x1e << CMD_SHIFT) +#define CMD_SEQ_OUT_PTR (0x1f << CMD_SHIFT) + +/* General-purpose class selector for all commands */ +#define CLASS_SHIFT 25 +#define CLASS_MASK (0x03 << CLASS_SHIFT) + +#define CLASS_NONE (0x00 << CLASS_SHIFT) +#define CLASS_1 (0x01 << CLASS_SHIFT) +#define CLASS_2 (0x02 << CLASS_SHIFT) +#define CLASS_BOTH (0x03 << CLASS_SHIFT) + +/* + * Descriptor header command constructs + * Covers shared, job, and trusted descriptor headers + */ + +/* + * Do Not Run - marks a descriptor inexecutable if there was + * a preceding error somewhere + */ +#define HDR_DNR 0x01000000 + +/* + * ONE - should always be set. Combination of ONE (always + * set) and ZRO (always clear) forms an endianness sanity check + */ +#define HDR_ONE 0x00800000 +#define HDR_ZRO 0x00008000 + +/* Start Index or SharedDesc Length */ +#define HDR_START_IDX_MASK 0x3f +#define HDR_START_IDX_SHIFT 16 + +/* If shared descriptor header, 6-bit length */ +#define HDR_DESCLEN_SHR_MASK 0x3f + +/* If non-shared header, 7-bit length */ +#define HDR_DESCLEN_MASK 0x7f + +/* This is a TrustedDesc (if not SharedDesc) */ +#define HDR_TRUSTED 0x00004000 + +/* Make into TrustedDesc (if not SharedDesc) */ +#define HDR_MAKE_TRUSTED 0x00002000 + +/* Save context if self-shared (if SharedDesc) */ +#define HDR_SAVECTX 0x00001000 + +/* Next item points to SharedDesc */ +#define HDR_SHARED 0x00001000 + +/* + * Reverse Execution Order - execute JobDesc first, then + * execute SharedDesc (normally SharedDesc goes first). + */ +#define HDR_REVERSE 0x00000800 + +/* Propogate DNR property to SharedDesc */ +#define HDR_PROP_DNR 0x00000800 + +/* JobDesc/SharedDesc share property */ +#define HDR_SD_SHARE_MASK 0x03 +#define HDR_SD_SHARE_SHIFT 8 +#define HDR_JD_SHARE_MASK 0x07 +#define HDR_JD_SHARE_SHIFT 8 + +#define HDR_SHARE_NEVER (0x00 << HDR_SD_SHARE_SHIFT) +#define HDR_SHARE_WAIT (0x01 << HDR_SD_SHARE_SHIFT) +#define HDR_SHARE_SERIAL (0x02 << HDR_SD_SHARE_SHIFT) +#define HDR_SHARE_ALWAYS (0x03 << HDR_SD_SHARE_SHIFT) +#define HDR_SHARE_DEFER (0x04 << HDR_SD_SHARE_SHIFT) + +/* JobDesc/SharedDesc descriptor length */ +#define HDR_JD_LENGTH_MASK 0x7f +#define HDR_SD_LENGTH_MASK 0x3f + +/* + * KEY/SEQ_KEY Command Constructs + */ + +/* Key Destination Class: 01 = Class 1, 02 - Class 2 */ +#define KEY_DEST_CLASS_SHIFT 25 /* use CLASS_1 or CLASS_2 */ +#define KEY_DEST_CLASS_MASK (0x03 << KEY_DEST_CLASS_SHIFT) + +/* Scatter-Gather Table/Variable Length Field */ +#define KEY_SGF 0x01000000 +#define KEY_VLF 0x01000000 + +/* Immediate - Key follows command in the descriptor */ +#define KEY_IMM 0x00800000 + +/* + * Encrypted - Key is encrypted either with the KEK, or + * with the TDKEK if TK is set + */ +#define KEY_ENC 0x00400000 + +/* + * No Write Back - Do not allow key to be FIFO STOREd + */ +#define KEY_NWB 0x00200000 + +/* + * Enhanced Encryption of Key + */ +#define KEY_EKT 0x00100000 + +/* + * Encrypted with Trusted Key + */ +#define KEY_TK 0x00008000 + +/* + * KDEST - Key Destination: 0 - class key register, + * 1 - PKHA 'e', 2 - AFHA Sbox, 3 - MDHA split-key + */ +#define KEY_DEST_SHIFT 16 +#define KEY_DEST_MASK (0x03 << KEY_DEST_SHIFT) + +#define KEY_DEST_CLASS_REG (0x00 << KEY_DEST_SHIFT) +#define KEY_DEST_PKHA_E (0x01 << KEY_DEST_SHIFT) +#define KEY_DEST_AFHA_SBOX (0x02 << KEY_DEST_SHIFT) +#define KEY_DEST_MDHA_SPLIT (0x03 << KEY_DEST_SHIFT) + +/* Length in bytes */ +#define KEY_LENGTH_MASK 0x000003ff + +/* + * LOAD/SEQ_LOAD/STORE/SEQ_STORE Command Constructs + */ + +/* + * Load/Store Destination: 0 = class independent CCB, + * 1 = class 1 CCB, 2 = class 2 CCB, 3 = DECO + */ +#define LDST_CLASS_SHIFT 25 +#define LDST_CLASS_MASK (0x03 << LDST_CLASS_SHIFT) +#define LDST_CLASS_IND_CCB (0x00 << LDST_CLASS_SHIFT) +#define LDST_CLASS_1_CCB (0x01 << LDST_CLASS_SHIFT) +#define LDST_CLASS_2_CCB (0x02 << LDST_CLASS_SHIFT) +#define LDST_CLASS_DECO (0x03 << LDST_CLASS_SHIFT) + +/* Scatter-Gather Table/Variable Length Field */ +#define LDST_SGF 0x01000000 +#define LDST_VLF LDST_SGF + +/* Immediate - Key follows this command in descriptor */ +#define LDST_IMM_MASK 1 +#define LDST_IMM_SHIFT 23 +#define LDST_IMM (LDST_IMM_MASK << LDST_IMM_SHIFT) + +/* SRC/DST - Destination for LOAD, Source for STORE */ +#define LDST_SRCDST_SHIFT 16 +#define LDST_SRCDST_MASK (0x7f << LDST_SRCDST_SHIFT) + +#define LDST_SRCDST_BYTE_CONTEXT (0x20 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_BYTE_KEY (0x40 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_BYTE_INFIFO (0x7c << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_BYTE_OUTFIFO (0x7e << LDST_SRCDST_SHIFT) + +#define LDST_SRCDST_WORD_MODE_REG (0x00 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_KEYSZ_REG (0x01 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DATASZ_REG (0x02 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_ICVSZ_REG (0x03 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_CHACTRL (0x06 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECOCTRL (0x06 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_IRQCTRL (0x07 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_PCLOVRD (0x07 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_CLRW (0x08 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_MATH0 (0x08 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_STAT (0x09 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_MATH1 (0x09 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_MATH2 (0x0a << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_AAD_SZ (0x0b << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DECO_MATH3 (0x0b << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_CLASS1_ICV_SZ (0x0c << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_ALTDS_CLASS1 (0x0f << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_PKHA_A_SZ (0x10 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_PKHA_B_SZ (0x11 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_PKHA_N_SZ (0x12 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_PKHA_E_SZ (0x13 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_CLASS_CTX (0x20 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DESCBUF (0x40 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DESCBUF_JOB (0x41 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DESCBUF_SHARED (0x42 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DESCBUF_JOB_WE (0x45 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_DESCBUF_SHARED_WE (0x46 << LDST_SRCDST_SHIFT) +#define LDST_SRCDST_WORD_INFO_FIFO (0x7a << LDST_SRCDST_SHIFT) + +/* Offset in source/destination */ +#define LDST_OFFSET_SHIFT 8 +#define LDST_OFFSET_MASK (0xff << LDST_OFFSET_SHIFT) + +/* LDOFF definitions used when DST = LDST_SRCDST_WORD_DECOCTRL */ +/* These could also be shifted by LDST_OFFSET_SHIFT - this reads better */ +#define LDOFF_CHG_SHARE_SHIFT 0 +#define LDOFF_CHG_SHARE_MASK (0x3 << LDOFF_CHG_SHARE_SHIFT) +#define LDOFF_CHG_SHARE_NEVER (0x1 << LDOFF_CHG_SHARE_SHIFT) +#define LDOFF_CHG_SHARE_OK_PROP (0x2 << LDOFF_CHG_SHARE_SHIFT) +#define LDOFF_CHG_SHARE_OK_NO_PROP (0x3 << LDOFF_CHG_SHARE_SHIFT) + +#define LDOFF_ENABLE_AUTO_NFIFO (1 << 2) +#define LDOFF_DISABLE_AUTO_NFIFO (1 << 3) + +#define LDOFF_CHG_NONSEQLIODN_SHIFT 4 +#define LDOFF_CHG_NONSEQLIODN_MASK (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT) +#define LDOFF_CHG_NONSEQLIODN_SEQ (0x1 << LDOFF_CHG_NONSEQLIODN_SHIFT) +#define LDOFF_CHG_NONSEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_NONSEQLIODN_SHIFT) +#define LDOFF_CHG_NONSEQLIODN_TRUSTED (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT) + +#define LDOFF_CHG_SEQLIODN_SHIFT 6 +#define LDOFF_CHG_SEQLIODN_MASK (0x3 << LDOFF_CHG_SEQLIODN_SHIFT) +#define LDOFF_CHG_SEQLIODN_SEQ (0x1 << LDOFF_CHG_SEQLIODN_SHIFT) +#define LDOFF_CHG_SEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_SEQLIODN_SHIFT) +#define LDOFF_CHG_SEQLIODN_TRUSTED (0x3 << LDOFF_CHG_SEQLIODN_SHIFT) + +/* Data length in bytes */ +#define LDST_LEN_SHIFT 0 +#define LDST_LEN_MASK (0xff << LDST_LEN_SHIFT) + +/* Special Length definitions when dst=deco-ctrl */ +#define LDLEN_ENABLE_OSL_COUNT (1 << 7) +#define LDLEN_RST_CHA_OFIFO_PTR (1 << 6) +#define LDLEN_RST_OFIFO (1 << 5) +#define LDLEN_SET_OFIFO_OFF_VALID (1 << 4) +#define LDLEN_SET_OFIFO_OFF_RSVD (1 << 3) +#define LDLEN_SET_OFIFO_OFFSET_SHIFT 0 +#define LDLEN_SET_OFIFO_OFFSET_MASK (3 << LDLEN_SET_OFIFO_OFFSET_SHIFT) + +/* + * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE + * Command Constructs + */ + +/* + * Load Destination: 0 = skip (SEQ_FIFO_LOAD only), + * 1 = Load for Class1, 2 = Load for Class2, 3 = Load both + * Store Source: 0 = normal, 1 = Class1key, 2 = Class2key + */ +#define FIFOLD_CLASS_SHIFT 25 +#define FIFOLD_CLASS_MASK (0x03 << FIFOLD_CLASS_SHIFT) +#define FIFOLD_CLASS_SKIP (0x00 << FIFOLD_CLASS_SHIFT) +#define FIFOLD_CLASS_CLASS1 (0x01 << FIFOLD_CLASS_SHIFT) +#define FIFOLD_CLASS_CLASS2 (0x02 << FIFOLD_CLASS_SHIFT) +#define FIFOLD_CLASS_BOTH (0x03 << FIFOLD_CLASS_SHIFT) + +#define FIFOST_CLASS_SHIFT 25 +#define FIFOST_CLASS_MASK (0x03 << FIFOST_CLASS_SHIFT) +#define FIFOST_CLASS_NORMAL (0x00 << FIFOST_CLASS_SHIFT) +#define FIFOST_CLASS_CLASS1KEY (0x01 << FIFOST_CLASS_SHIFT) +#define FIFOST_CLASS_CLASS2KEY (0x02 << FIFOST_CLASS_SHIFT) + +/* + * Scatter-Gather Table/Variable Length Field + * If set for FIFO_LOAD, refers to a SG table. Within + * SEQ_FIFO_LOAD, is variable input sequence + */ +#define FIFOLDST_SGF_SHIFT 24 +#define FIFOLDST_SGF_MASK (1 << FIFOLDST_SGF_SHIFT) +#define FIFOLDST_VLF_MASK (1 << FIFOLDST_SGF_SHIFT) +#define FIFOLDST_SGF (1 << FIFOLDST_SGF_SHIFT) +#define FIFOLDST_VLF (1 << FIFOLDST_SGF_SHIFT) + +/* Immediate - Data follows command in descriptor */ +#define FIFOLD_IMM_SHIFT 23 +#define FIFOLD_IMM_MASK (1 << FIFOLD_IMM_SHIFT) +#define FIFOLD_IMM (1 << FIFOLD_IMM_SHIFT) + +/* Continue - Not the last FIFO store to come */ +#define FIFOST_CONT_SHIFT 23 +#define FIFOST_CONT_MASK (1 << FIFOST_CONT_SHIFT) + +/* + * Extended Length - use 32-bit extended length that + * follows the pointer field. Illegal with IMM set + */ +#define FIFOLDST_EXT_SHIFT 22 +#define FIFOLDST_EXT_MASK (1 << FIFOLDST_EXT_SHIFT) +#define FIFOLDST_EXT (1 << FIFOLDST_EXT_SHIFT) + +/* Input data type.*/ +#define FIFOLD_TYPE_SHIFT 16 +#define FIFOLD_CONT_TYPE_SHIFT 19 /* shift past last-flush bits */ +#define FIFOLD_TYPE_MASK (0x3f << FIFOLD_TYPE_SHIFT) + +/* PK types */ +#define FIFOLD_TYPE_PK (0x00 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_MASK (0x30 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_TYPEMASK (0x0f << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_A0 (0x00 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_A1 (0x01 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_A2 (0x02 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_A3 (0x03 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_B0 (0x04 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_B1 (0x05 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_B2 (0x06 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_B3 (0x07 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_N (0x08 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_A (0x0c << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_PK_B (0x0d << FIFOLD_TYPE_SHIFT) + +/* Other types. Need to OR in last/flush bits as desired */ +#define FIFOLD_TYPE_MSG_MASK (0x38 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_MSG (0x10 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_MSG1OUT2 (0x18 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_IV (0x20 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_BITDATA (0x28 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_AAD (0x30 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_ICV (0x38 << FIFOLD_TYPE_SHIFT) + +/* Last/Flush bits for use with "other" types above */ +#define FIFOLD_TYPE_ACT_MASK (0x07 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_NOACTION (0x00 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_FLUSH1 (0x01 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LAST1 (0x02 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LAST2FLUSH (0x03 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LAST2 (0x04 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LAST2FLUSH1 (0x05 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LASTBOTH (0x06 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_LASTBOTHFL (0x07 << FIFOLD_TYPE_SHIFT) +#define FIFOLD_TYPE_NOINFOFIFO (0x0F << FIFOLD_TYPE_SHIFT) + +#define FIFOLDST_LEN_MASK 0xffff +#define FIFOLDST_EXT_LEN_MASK 0xffffffff + +/* Output data types */ +#define FIFOST_TYPE_SHIFT 16 +#define FIFOST_TYPE_MASK (0x3f << FIFOST_TYPE_SHIFT) + +#define FIFOST_TYPE_PKHA_A0 (0x00 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_A1 (0x01 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_A2 (0x02 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_A3 (0x03 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_B0 (0x04 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_B1 (0x05 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_B2 (0x06 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_B3 (0x07 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_N (0x08 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_A (0x0c << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_B (0x0d << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_AF_SBOX_JKEK (0x10 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_AF_SBOX_TKEK (0x21 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_E_JKEK (0x22 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_PKHA_E_TKEK (0x23 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_KEY_KEK (0x24 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_KEY_TKEK (0x25 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_SPLIT_KEK (0x26 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_SPLIT_TKEK (0x27 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_OUTFIFO_KEK (0x28 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_OUTFIFO_TKEK (0x29 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_MESSAGE_DATA (0x30 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_RNGSTORE (0x34 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_RNGFIFO (0x35 << FIFOST_TYPE_SHIFT) +#define FIFOST_TYPE_SKIP (0x3f << FIFOST_TYPE_SHIFT) + +/* + * OPERATION Command Constructs + */ + +/* Operation type selectors - OP TYPE */ +#define OP_TYPE_SHIFT 24 +#define OP_TYPE_MASK (0x07 << OP_TYPE_SHIFT) + +#define OP_TYPE_UNI_PROTOCOL (0x00 << OP_TYPE_SHIFT) +#define OP_TYPE_PK (0x01 << OP_TYPE_SHIFT) +#define OP_TYPE_CLASS1_ALG (0x02 << OP_TYPE_SHIFT) +#define OP_TYPE_CLASS2_ALG (0x04 << OP_TYPE_SHIFT) +#define OP_TYPE_DECAP_PROTOCOL (0x06 << OP_TYPE_SHIFT) +#define OP_TYPE_ENCAP_PROTOCOL (0x07 << OP_TYPE_SHIFT) + +/* ProtocolID selectors - PROTID */ +#define OP_PCLID_SHIFT 16 +#define OP_PCLID_MASK (0xff << 16) + +/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */ +#define OP_PCLID_BLOB (0x0d << OP_PCLID_SHIFT) +#define OP_PCLID_SECRETKEY (0x11 << OP_PCLID_SHIFT) +#define OP_PCLID_PUBLICKEYPAIR (0x14 << OP_PCLID_SHIFT) + +/* For non-protocol/alg-only op commands */ +#define OP_ALG_TYPE_SHIFT 24 +#define OP_ALG_TYPE_MASK (0x7 << OP_ALG_TYPE_SHIFT) +#define OP_ALG_TYPE_CLASS1 2 +#define OP_ALG_TYPE_CLASS2 4 + +#define OP_ALG_ALGSEL_SHIFT 16 +#define OP_ALG_ALGSEL_MASK (0xff << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SUBMASK (0x0f << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_AES (0x10 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_DES (0x20 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_3DES (0x21 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_ARC4 (0x30 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_MD5 (0x40 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SHA1 (0x41 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SHA224 (0x42 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SHA256 (0x43 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SHA384 (0x44 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SHA512 (0x45 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_RNG (0x50 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SNOW (0x60 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SNOW_F8 (0x60 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_KASUMI (0x70 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_CRC (0x90 << OP_ALG_ALGSEL_SHIFT) +#define OP_ALG_ALGSEL_SNOW_F9 (0xA0 << OP_ALG_ALGSEL_SHIFT) + +#define OP_ALG_AAI_SHIFT 4 +#define OP_ALG_AAI_MASK (0x1ff << OP_ALG_AAI_SHIFT) + +/* randomizer AAI set */ +#define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG_NZB (0x10 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG_OBP (0x20 << OP_ALG_AAI_SHIFT) + +/* RNG4 AAI set */ +#define OP_ALG_AAI_RNG4_SH_0 (0x00 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_SH_1 (0x01 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_PS (0x40 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT) + +/* hmac/smac AAI set */ +#define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_HMAC (0x01 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_SMAC (0x02 << OP_ALG_AAI_SHIFT) +#define OP_ALG_AAI_HMAC_PRECOMP (0x04 << OP_ALG_AAI_SHIFT) + +#define OP_ALG_AS_SHIFT 2 +#define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT) +#define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT) +#define OP_ALG_AS_INIT (1 << OP_ALG_AS_SHIFT) +#define OP_ALG_AS_FINALIZE (2 << OP_ALG_AS_SHIFT) +#define OP_ALG_AS_INITFINAL (3 << OP_ALG_AS_SHIFT) + +#define OP_ALG_ICV_SHIFT 1 +#define OP_ALG_ICV_MASK (1 << OP_ALG_ICV_SHIFT) +#define OP_ALG_ICV_OFF (0 << OP_ALG_ICV_SHIFT) +#define OP_ALG_ICV_ON (1 << OP_ALG_ICV_SHIFT) + +#define OP_ALG_DIR_SHIFT 0 +#define OP_ALG_DIR_MASK 1 +#define OP_ALG_DECRYPT 0 +#define OP_ALG_ENCRYPT 1 + +/* PKHA algorithm type set */ +#define OP_ALG_PK 0x00800000 +#define OP_ALG_PK_FUN_MASK 0x3f /* clrmem, modmath, or cpymem */ + +/* PKHA mode modular-arithmetic functions */ +#define OP_ALG_PKMODE_MOD_EXPO 0x006 + +/* + * SEQ_IN_PTR Command Constructs + */ + +/* Release Buffers */ +#define SQIN_RBS 0x04000000 + +/* Sequence pointer is really a descriptor */ +#define SQIN_INL 0x02000000 + +/* Sequence pointer is a scatter-gather table */ +#define SQIN_SGF 0x01000000 + +/* Appends to a previous pointer */ +#define SQIN_PRE 0x00800000 + +/* Use extended length following pointer */ +#define SQIN_EXT 0x00400000 + +/* Restore sequence with pointer/length */ +#define SQIN_RTO 0x00200000 + +/* Replace job descriptor */ +#define SQIN_RJD 0x00100000 + +#define SQIN_LEN_SHIFT 0 +#define SQIN_LEN_MASK (0xffff << SQIN_LEN_SHIFT) + +/* + * SEQ_OUT_PTR Command Constructs + */ + +/* Sequence pointer is a scatter-gather table */ +#define SQOUT_SGF 0x01000000 + +/* Appends to a previous pointer */ +#define SQOUT_PRE SQIN_PRE + +/* Restore sequence with pointer/length */ +#define SQOUT_RTO SQIN_RTO + +/* Use extended length following pointer */ +#define SQOUT_EXT 0x00400000 + +#define SQOUT_LEN_SHIFT 0 +#define SQOUT_LEN_MASK (0xffff << SQOUT_LEN_SHIFT) + +/* + * MOVE Command Constructs + */ + +#define MOVE_AUX_SHIFT 25 +#define MOVE_AUX_MASK (3 << MOVE_AUX_SHIFT) +#define MOVE_AUX_MS (2 << MOVE_AUX_SHIFT) +#define MOVE_AUX_LS (1 << MOVE_AUX_SHIFT) + +#define MOVE_WAITCOMP_SHIFT 24 +#define MOVE_WAITCOMP_MASK (1 << MOVE_WAITCOMP_SHIFT) +#define MOVE_WAITCOMP (1 << MOVE_WAITCOMP_SHIFT) + +#define MOVE_SRC_SHIFT 20 +#define MOVE_SRC_MASK (0x0f << MOVE_SRC_SHIFT) +#define MOVE_SRC_CLASS1CTX (0x00 << MOVE_SRC_SHIFT) +#define MOVE_SRC_CLASS2CTX (0x01 << MOVE_SRC_SHIFT) +#define MOVE_SRC_OUTFIFO (0x02 << MOVE_SRC_SHIFT) +#define MOVE_SRC_DESCBUF (0x03 << MOVE_SRC_SHIFT) +#define MOVE_SRC_MATH0 (0x04 << MOVE_SRC_SHIFT) +#define MOVE_SRC_MATH1 (0x05 << MOVE_SRC_SHIFT) +#define MOVE_SRC_MATH2 (0x06 << MOVE_SRC_SHIFT) +#define MOVE_SRC_MATH3 (0x07 << MOVE_SRC_SHIFT) +#define MOVE_SRC_INFIFO (0x08 << MOVE_SRC_SHIFT) +#define MOVE_SRC_INFIFO_CL (0x09 << MOVE_SRC_SHIFT) + +#define MOVE_DEST_SHIFT 16 +#define MOVE_DEST_MASK (0x0f << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS1CTX (0x00 << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS2CTX (0x01 << MOVE_DEST_SHIFT) +#define MOVE_DEST_OUTFIFO (0x02 << MOVE_DEST_SHIFT) +#define MOVE_DEST_DESCBUF (0x03 << MOVE_DEST_SHIFT) +#define MOVE_DEST_MATH0 (0x04 << MOVE_DEST_SHIFT) +#define MOVE_DEST_MATH1 (0x05 << MOVE_DEST_SHIFT) +#define MOVE_DEST_MATH2 (0x06 << MOVE_DEST_SHIFT) +#define MOVE_DEST_MATH3 (0x07 << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS1INFIFO (0x08 << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS2INFIFO (0x09 << MOVE_DEST_SHIFT) +#define MOVE_DEST_INFIFO_NOINFO (0x0a << MOVE_DEST_SHIFT) +#define MOVE_DEST_PK_A (0x0c << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS1KEY (0x0d << MOVE_DEST_SHIFT) +#define MOVE_DEST_CLASS2KEY (0x0e << MOVE_DEST_SHIFT) + +#define MOVE_OFFSET_SHIFT 8 +#define MOVE_OFFSET_MASK (0xff << MOVE_OFFSET_SHIFT) + +#define MOVE_LEN_SHIFT 0 +#define MOVE_LEN_MASK (0xff << MOVE_LEN_SHIFT) + +#define MOVELEN_MRSEL_SHIFT 0 +#define MOVELEN_MRSEL_MASK (0x3 << MOVE_LEN_SHIFT) + +/* + * JUMP Command Constructs + */ + +#define JUMP_CLASS_SHIFT 25 +#define JUMP_CLASS_MASK (3 << JUMP_CLASS_SHIFT) +#define JUMP_CLASS_NONE 0 +#define JUMP_CLASS_CLASS1 (1 << JUMP_CLASS_SHIFT) +#define JUMP_CLASS_CLASS2 (2 << JUMP_CLASS_SHIFT) +#define JUMP_CLASS_BOTH (3 << JUMP_CLASS_SHIFT) + +#define JUMP_JSL_SHIFT 24 +#define JUMP_JSL_MASK (1 << JUMP_JSL_SHIFT) +#define JUMP_JSL (1 << JUMP_JSL_SHIFT) + +#define JUMP_TYPE_SHIFT 22 +#define JUMP_TYPE_MASK (0x03 << JUMP_TYPE_SHIFT) +#define JUMP_TYPE_LOCAL (0x00 << JUMP_TYPE_SHIFT) +#define JUMP_TYPE_NONLOCAL (0x01 << JUMP_TYPE_SHIFT) +#define JUMP_TYPE_HALT (0x02 << JUMP_TYPE_SHIFT) +#define JUMP_TYPE_HALT_USER (0x03 << JUMP_TYPE_SHIFT) + +#define JUMP_TEST_SHIFT 16 +#define JUMP_TEST_MASK (0x03 << JUMP_TEST_SHIFT) +#define JUMP_TEST_ALL (0x00 << JUMP_TEST_SHIFT) +#define JUMP_TEST_INVALL (0x01 << JUMP_TEST_SHIFT) +#define JUMP_TEST_ANY (0x02 << JUMP_TEST_SHIFT) +#define JUMP_TEST_INVANY (0x03 << JUMP_TEST_SHIFT) + +/* Condition codes. JSL bit is factored in */ +#define JUMP_COND_SHIFT 8 +#define JUMP_COND_MASK (0x100ff << JUMP_COND_SHIFT) +#define JUMP_COND_PK_0 (0x80 << JUMP_COND_SHIFT) +#define JUMP_COND_PK_GCD_1 (0x40 << JUMP_COND_SHIFT) +#define JUMP_COND_PK_PRIME (0x20 << JUMP_COND_SHIFT) +#define JUMP_COND_MATH_N (0x08 << JUMP_COND_SHIFT) +#define JUMP_COND_MATH_Z (0x04 << JUMP_COND_SHIFT) +#define JUMP_COND_MATH_C (0x02 << JUMP_COND_SHIFT) +#define JUMP_COND_MATH_NV (0x01 << JUMP_COND_SHIFT) + +#define JUMP_COND_JRP ((0x80 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_SHRD ((0x40 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_SELF ((0x20 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_CALM ((0x10 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_NIP ((0x08 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_NIFP ((0x04 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_NOP ((0x02 << JUMP_COND_SHIFT) | JUMP_JSL) +#define JUMP_COND_NCP ((0x01 << JUMP_COND_SHIFT) | JUMP_JSL) + +#define JUMP_OFFSET_SHIFT 0 +#define JUMP_OFFSET_MASK (0xff << JUMP_OFFSET_SHIFT) + +#define OP_ALG_RNG4_SHIFT 4 +#define OP_ALG_RNG4_MAS (0x1f3 << OP_ALG_RNG4_SHIFT) +#define OP_ALG_RNG4_SK (0x100 << OP_ALG_RNG4_SHIFT) + +#endif /* DESC_H */ diff --git a/drivers/crypto/fsl/desc_constr.h b/drivers/crypto/fsl/desc_constr.h new file mode 100644 index 0000000000..f9cae9144a --- /dev/null +++ b/drivers/crypto/fsl/desc_constr.h @@ -0,0 +1,280 @@ +/* + * caam descriptor construction helper functions + * + * Copyright 2008-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Based on desc_constr.h file in linux drivers/crypto/caam + */ + +#include <linux/compat.h> +#include "desc.h" + +#define IMMEDIATE (1 << 23) +#define CAAM_CMD_SZ sizeof(u32) +#define CAAM_PTR_SZ sizeof(dma_addr_t) +#define CAAM_DESC_BYTES_MAX (CAAM_CMD_SZ * MAX_CAAM_DESCSIZE) +#define DESC_JOB_IO_LEN (CAAM_CMD_SZ * 5 + CAAM_PTR_SZ * 3) + +#ifdef DEBUG +#define PRINT_POS do { printf("%02d: %s\n", desc_len(desc),\ + &__func__[sizeof("append")]); \ + } while (0) +#else +#define PRINT_POS +#endif + +#define SET_OK_NO_PROP_ERRORS (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_CHG_SHARE_OK_NO_PROP << \ + LDST_OFFSET_SHIFT)) +#define DISABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_DISABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT)) +#define ENABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_ENABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT)) + +static inline int desc_len(u32 *desc) +{ + return *desc & HDR_DESCLEN_MASK; +} + +static inline int desc_bytes(void *desc) +{ + return desc_len(desc) * CAAM_CMD_SZ; +} + +static inline u32 *desc_end(u32 *desc) +{ + return desc + desc_len(desc); +} + +static inline void init_desc(u32 *desc, u32 options) +{ + *desc = (options | HDR_ONE) + 1; +} + +static inline void init_job_desc(u32 *desc, u32 options) +{ + init_desc(desc, CMD_DESC_HDR | options); +} + +static inline void append_ptr(u32 *desc, dma_addr_t ptr) +{ + dma_addr_t *offset = (dma_addr_t *)desc_end(desc); + + *offset = ptr; + + (*desc) += CAAM_PTR_SZ / CAAM_CMD_SZ; +} + +static inline void append_data(u32 *desc, void *data, int len) +{ + u32 *offset = desc_end(desc); + + if (len) /* avoid sparse warning: memcpy with byte count of 0 */ + memcpy(offset, data, len); + + (*desc) += (len + CAAM_CMD_SZ - 1) / CAAM_CMD_SZ; +} + +static inline void append_cmd(u32 *desc, u32 command) +{ + u32 *cmd = desc_end(desc); + + *cmd = command; + + (*desc)++; +} + +#define append_u32 append_cmd + +static inline void append_u64(u32 *desc, u64 data) +{ + u32 *offset = desc_end(desc); + + *offset = upper_32_bits(data); + *(++offset) = lower_32_bits(data); + + (*desc) += 2; +} + +/* Write command without affecting header, and return pointer to next word */ +static inline u32 *write_cmd(u32 *desc, u32 command) +{ + *desc = command; + + return desc + 1; +} + +static inline void append_cmd_ptr(u32 *desc, dma_addr_t ptr, int len, + u32 command) +{ + append_cmd(desc, command | len); + append_ptr(desc, ptr); +} + +/* Write length after pointer, rather than inside command */ +static inline void append_cmd_ptr_extlen(u32 *desc, dma_addr_t ptr, + unsigned int len, u32 command) +{ + append_cmd(desc, command); + if (!(command & (SQIN_RTO | SQIN_PRE))) + append_ptr(desc, ptr); + append_cmd(desc, len); +} + +static inline void append_cmd_data(u32 *desc, void *data, int len, + u32 command) +{ + append_cmd(desc, command | IMMEDIATE | len); + append_data(desc, data, len); +} + +#define APPEND_CMD_RET(cmd, op) \ +static inline u32 *append_##cmd(u32 *desc, u32 options) \ +{ \ + u32 *cmd = desc_end(desc); \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | options); \ + return cmd; \ +} +APPEND_CMD_RET(jump, JUMP) +APPEND_CMD_RET(move, MOVE) + +static inline void set_jump_tgt_here(u32 *desc, u32 *jump_cmd) +{ + *jump_cmd = *jump_cmd | (desc_len(desc) - (jump_cmd - desc)); +} + +static inline void set_move_tgt_here(u32 *desc, u32 *move_cmd) +{ + *move_cmd &= ~MOVE_OFFSET_MASK; + *move_cmd = *move_cmd | ((desc_len(desc) << (MOVE_OFFSET_SHIFT + 2)) & + MOVE_OFFSET_MASK); +} + +#define APPEND_CMD(cmd, op) \ +static inline void append_##cmd(u32 *desc, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | options); \ +} +APPEND_CMD(operation, OPERATION) + +#define APPEND_CMD_LEN(cmd, op) \ +static inline void append_##cmd(u32 *desc, unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | len | options); \ +} +APPEND_CMD_LEN(seq_store, SEQ_STORE) +APPEND_CMD_LEN(seq_fifo_load, SEQ_FIFO_LOAD) +APPEND_CMD_LEN(seq_fifo_store, SEQ_FIFO_STORE) + +#define APPEND_CMD_PTR(cmd, op) \ +static inline void append_##cmd(u32 *desc, dma_addr_t ptr, unsigned int len, \ + u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_ptr(desc, ptr, len, CMD_##op | options); \ +} +APPEND_CMD_PTR(key, KEY) +APPEND_CMD_PTR(load, LOAD) +APPEND_CMD_PTR(fifo_load, FIFO_LOAD) +APPEND_CMD_PTR(fifo_store, FIFO_STORE) + +static inline void append_store(u32 *desc, dma_addr_t ptr, unsigned int len, + u32 options) +{ + u32 cmd_src; + + cmd_src = options & LDST_SRCDST_MASK; + + append_cmd(desc, CMD_STORE | options | len); + + /* The following options do not require pointer */ + if (!(cmd_src == LDST_SRCDST_WORD_DESCBUF_SHARED || + cmd_src == LDST_SRCDST_WORD_DESCBUF_JOB || + cmd_src == LDST_SRCDST_WORD_DESCBUF_JOB_WE || + cmd_src == LDST_SRCDST_WORD_DESCBUF_SHARED_WE)) + append_ptr(desc, ptr); +} + +#define APPEND_SEQ_PTR_INTLEN(cmd, op) \ +static inline void append_seq_##cmd##_ptr_intlen(u32 *desc, dma_addr_t ptr, \ + unsigned int len, \ + u32 options) \ +{ \ + PRINT_POS; \ + if (options & (SQIN_RTO | SQIN_PRE)) \ + append_cmd(desc, CMD_SEQ_##op##_PTR | len | options); \ + else \ + append_cmd_ptr(desc, ptr, len, CMD_SEQ_##op##_PTR | options); \ +} +APPEND_SEQ_PTR_INTLEN(in, IN) +APPEND_SEQ_PTR_INTLEN(out, OUT) + +#define APPEND_CMD_PTR_TO_IMM(cmd, op) \ +static inline void append_##cmd##_as_imm(u32 *desc, void *data, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_data(desc, data, len, CMD_##op | options); \ +} +APPEND_CMD_PTR_TO_IMM(load, LOAD); +APPEND_CMD_PTR_TO_IMM(fifo_load, FIFO_LOAD); + +#define APPEND_CMD_PTR_EXTLEN(cmd, op) \ +static inline void append_##cmd##_extlen(u32 *desc, dma_addr_t ptr, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_ptr_extlen(desc, ptr, len, CMD_##op | SQIN_EXT | options); \ +} +APPEND_CMD_PTR_EXTLEN(seq_in_ptr, SEQ_IN_PTR) +APPEND_CMD_PTR_EXTLEN(seq_out_ptr, SEQ_OUT_PTR) + +/* + * Determine whether to store length internally or externally depending on + * the size of its type + */ +#define APPEND_CMD_PTR_LEN(cmd, op, type) \ +static inline void append_##cmd(u32 *desc, dma_addr_t ptr, \ + type len, u32 options) \ +{ \ + PRINT_POS; \ + if (sizeof(type) > sizeof(u16)) \ + append_##cmd##_extlen(desc, ptr, len, options); \ + else \ + append_##cmd##_intlen(desc, ptr, len, options); \ +} +APPEND_CMD_PTR_LEN(seq_in_ptr, SEQ_IN_PTR, u32) +APPEND_CMD_PTR_LEN(seq_out_ptr, SEQ_OUT_PTR, u32) + +/* + * 2nd variant for commands whose specified immediate length differs + * from length of immediate data provided, e.g., split keys + */ +#define APPEND_CMD_PTR_TO_IMM2(cmd, op) \ +static inline void append_##cmd##_as_imm(u32 *desc, void *data, \ + unsigned int data_len, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | IMMEDIATE | len | options); \ + append_data(desc, data, data_len); \ +} +APPEND_CMD_PTR_TO_IMM2(key, KEY); + +#define APPEND_CMD_RAW_IMM(cmd, op, type) \ +static inline void append_##cmd##_imm_##type(u32 *desc, type immediate, \ + u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | IMMEDIATE | options | sizeof(type)); \ + append_cmd(desc, immediate); \ +} +APPEND_CMD_RAW_IMM(load, LOAD, u32); diff --git a/drivers/crypto/fsl/error.c b/drivers/crypto/fsl/error.c new file mode 100644 index 0000000000..28cdcdd4cc --- /dev/null +++ b/drivers/crypto/fsl/error.c @@ -0,0 +1,258 @@ +/* + * CAAM Error Reporting + * + * Copyright 2009-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Derived from error.c file in linux drivers/crypto/caam + */ + +#include <common.h> +#include <malloc.h> +#include "desc.h" +#include "jr.h" + +#define CAAM_ERROR_STR_MAX 302 + +#define JRSTA_SSRC_SHIFT 28 +#define JRSTA_CCBERR_CHAID_MASK 0x00f0 +#define JRSTA_CCBERR_CHAID_SHIFT 4 +#define JRSTA_CCBERR_ERRID_MASK 0x000 +#define JRSTA_CCBERR_CHAID_RNG (0x05 << JRSTA_CCBERR_CHAID_SHIFT) + +#define JRSTA_DECOERR_JUMP 0x08000000 +#define JRSTA_DECOERR_INDEX_SHIFT 8 +#define JRSTA_DECOERR_INDEX_MASK 0xff00 +#define JRSTA_DECOERR_ERROR_MASK 0x00ff + + +static const struct { + u8 value; + const char *error_text; +} desc_error_list[] = { + { 0x00, "No error." }, + { 0x01, "SGT Length Error. The descriptor is trying to read" \ + " more data than is contained in the SGT table." }, + { 0x02, "SGT Null Entry Error." }, + { 0x03, "Job Ring Control Error. Bad value in Job Ring Control reg." }, + { 0x04, "Invalid Descriptor Command." }, + { 0x05, "Reserved." }, + { 0x06, "Invalid KEY Command" }, + { 0x07, "Invalid LOAD Command" }, + { 0x08, "Invalid STORE Command" }, + { 0x09, "Invalid OPERATION Command" }, + { 0x0A, "Invalid FIFO LOAD Command" }, + { 0x0B, "Invalid FIFO STORE Command" }, + { 0x0C, "Invalid MOVE/MOVE_LEN Command" }, + { 0x0D, "Invalid JUMP Command" }, + { 0x0E, "Invalid MATH Command" }, + { 0x0F, "Invalid SIGNATURE Command" }, + { 0x10, "Invalid Sequence Command" }, + { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."}, + { 0x12, "Shared Descriptor Header Error" }, + { 0x13, "Header Error. Invalid length or parity, or other problems." }, + { 0x14, "Burster Error. Burster has gotten to an illegal state" }, + { 0x15, "Context Register Length Error" }, + { 0x16, "DMA Error" }, + { 0x17, "Reserved." }, + { 0x1A, "Job failed due to JR reset" }, + { 0x1B, "Job failed due to Fail Mode" }, + { 0x1C, "DECO Watchdog timer timeout error" }, + { 0x1D, "DECO tried to copy a key from another DECO but" \ + " the other DECO's Key Registers were locked" }, + { 0x1E, "DECO attempted to copy data from a DECO" \ + "that had an unmasked Descriptor error" }, + { 0x1F, "LIODN error" }, + { 0x20, "DECO has completed a reset initiated via the DRR register" }, + { 0x21, "Nonce error" }, + { 0x22, "Meta data is too large (> 511 bytes) for TLS decap" }, + { 0x23, "Read Input Frame error" }, + { 0x24, "JDKEK, TDKEK or TDSK not loaded error" }, + { 0x80, "DNR (do not run) error" }, + { 0x81, "undefined protocol command" }, + { 0x82, "invalid setting in PDB" }, + { 0x83, "Anti-replay LATE error" }, + { 0x84, "Anti-replay REPLAY error" }, + { 0x85, "Sequence number overflow" }, + { 0x86, "Sigver invalid signature" }, + { 0x87, "DSA Sign Illegal test descriptor" }, + { 0x88, "Protocol Format Error" }, + { 0x89, "Protocol Size Error" }, + { 0xC1, "Blob Command error: Undefined mode" }, + { 0xC2, "Blob Command error: Secure Memory Blob mode error" }, + { 0xC4, "Blob Command error: Black Blob key or input size error" }, + { 0xC5, "Blob Command error: Invalid key destination" }, + { 0xC8, "Blob Command error: Trusted/Secure mode error" }, + { 0xF0, "IPsec TTL or hop limit field is 0, or was decremented to 0" }, + { 0xF1, "3GPP HFN matches or exceeds the Threshold" }, +}; + +static const char * const cha_id_list[] = { + "", + "AES", + "DES", + "ARC4", + "MDHA", + "RNG", + "SNOW f8", + "Kasumi f8/9", + "PKHA", + "CRCA", + "SNOW f9", + "ZUCE", + "ZUCA", +}; + +static const char * const err_id_list[] = { + "No error.", + "Mode error.", + "Data size error.", + "Key size error.", + "PKHA A memory size error.", + "PKHA B memory size error.", + "Data arrived out of sequence error.", + "PKHA divide-by-zero error.", + "PKHA modulus even error.", + "DES key parity error.", + "ICV check failed.", + "Hardware error.", + "Unsupported CCM AAD size.", + "Class 1 CHA is not reset", + "Invalid CHA combination was selected", + "Invalid CHA selected.", +}; + +static const char * const rng_err_id_list[] = { + "", + "", + "", + "Instantiate", + "Not instantiated", + "Test instantiate", + "Prediction resistance", + "Prediction resistance and test request", + "Uninstantiate", + "Secure key generation", +}; + +static void report_ccb_status(const u32 status, + const char *error) +{ + u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >> + JRSTA_CCBERR_CHAID_SHIFT; + u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *cha_str = "unidentified cha_id value 0x"; + char cha_err_code[3] = { 0 }; + const char *err_str = "unidentified err_id value 0x"; + char err_err_code[3] = { 0 }; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + if (cha_id < ARRAY_SIZE(cha_id_list)) + cha_str = cha_id_list[cha_id]; + else + snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id); + + if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG && + err_id < ARRAY_SIZE(rng_err_id_list) && + strlen(rng_err_id_list[err_id])) { + /* RNG-only error */ + err_str = rng_err_id_list[err_id]; + } else if (err_id < ARRAY_SIZE(err_id_list)) { + err_str = err_id_list[err_id]; + } else { + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + } + + debug("%08x: %s: %s %d: %s%s: %s%s\n", + status, error, idx_str, idx, + cha_str, cha_err_code, + err_str, err_err_code); +} + +static void report_jump_status(const u32 status, + const char *error) +{ + debug("%08x: %s: %s() not implemented\n", + status, error, __func__); +} + +static void report_deco_status(const u32 status, + const char *error) +{ + u8 err_id = status & JRSTA_DECOERR_ERROR_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *err_str = "unidentified error value 0x"; + char err_err_code[3] = { 0 }; + int i; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + for (i = 0; i < ARRAY_SIZE(desc_error_list); i++) + if (desc_error_list[i].value == err_id) + break; + + if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) + err_str = desc_error_list[i].error_text; + else + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + + debug("%08x: %s: %s %d: %s%s\n", + status, error, idx_str, idx, err_str, err_err_code); +} + +static void report_jr_status(const u32 status, + const char *error) +{ + debug("%08x: %s: %s() not implemented\n", + status, error, __func__); +} + +static void report_cond_code_status(const u32 status, + const char *error) +{ + debug("%08x: %s: %s() not implemented\n", + status, error, __func__); +} + +void caam_jr_strstatus(u32 status) +{ + static const struct stat_src { + void (*report_ssed)(const u32 status, + const char *error); + const char *error; + } status_src[] = { + { NULL, "No error" }, + { NULL, NULL }, + { report_ccb_status, "CCB" }, + { report_jump_status, "Jump" }, + { report_deco_status, "DECO" }, + { NULL, NULL }, + { report_jr_status, "Job Ring" }, + { report_cond_code_status, "Condition Code" }, + }; + u32 ssrc = status >> JRSTA_SSRC_SHIFT; + const char *error = status_src[ssrc].error; + + /* + * If there is no further error handling function, just + * print the error code, error string and exit. Otherwise + * call the handler function. + */ + if (!status_src[ssrc].report_ssed) + debug("%08x: %s:\n", status, status_src[ssrc].error); + else + status_src[ssrc].report_ssed(status, error); +} diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c new file mode 100644 index 0000000000..bc0107521c --- /dev/null +++ b/drivers/crypto/fsl/fsl_blob.c @@ -0,0 +1,61 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <malloc.h> +#include "jobdesc.h" +#include "desc.h" +#include "jr.h" + +int blob_decrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +{ + int ret, i = 0; + u32 *desc; + + printf("\nDecapsulating data to form blob\n"); + desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE); + if (!desc) { + debug("Not enough memory for descriptor allocation\n"); + return -1; + } + + inline_cnstr_jobdesc_blob_decap(desc, key_mod, src, dst, len); + + for (i = 0; i < 14; i++) + printf("%x\n", *(desc + i)); + ret = run_descriptor_jr(desc); + + if (ret) + printf("Error in Decapsulation %d\n", ret); + + free(desc); + return ret; +} + +int blob_encrypt(u8 *key_mod, u8 *src, u8 *dst, u8 len) +{ + int ret, i = 0; + u32 *desc; + + printf("\nEncapsulating data to form blob\n"); + desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE); + if (!desc) { + debug("Not enough memory for descriptor allocation\n"); + return -1; + } + + inline_cnstr_jobdesc_blob_encap(desc, key_mod, src, dst, len); + for (i = 0; i < 14; i++) + printf("%x\n", *(desc + i)); + ret = run_descriptor_jr(desc); + + if (ret) + printf("Error in Encapsulation %d\n", ret); + + free(desc); + return ret; +} diff --git a/drivers/crypto/fsl/fsl_hash.c b/drivers/crypto/fsl/fsl_hash.c new file mode 100644 index 0000000000..d77f2573d0 --- /dev/null +++ b/drivers/crypto/fsl/fsl_hash.c @@ -0,0 +1,77 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <malloc.h> +#include "jobdesc.h" +#include "desc.h" +#include "jr.h" + +#define CRYPTO_MAX_ALG_NAME 80 +#define SHA1_DIGEST_SIZE 20 +#define SHA256_DIGEST_SIZE 32 + +struct caam_hash_template { + char name[CRYPTO_MAX_ALG_NAME]; + unsigned int digestsize; + u32 alg_type; +}; + +enum caam_hash_algos { + SHA1 = 0, + SHA256 +}; + +static struct caam_hash_template driver_hash[] = { + { + .name = "sha1", + .digestsize = SHA1_DIGEST_SIZE, + .alg_type = OP_ALG_ALGSEL_SHA1, + }, + { + .name = "sha256", + .digestsize = SHA256_DIGEST_SIZE, + .alg_type = OP_ALG_ALGSEL_SHA256, + }, +}; + +int caam_hash(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, enum caam_hash_algos algo) +{ + int ret = 0; + uint32_t *desc; + + desc = malloc(sizeof(int) * MAX_CAAM_DESCSIZE); + if (!desc) { + debug("Not enough memory for descriptor allocation\n"); + return -1; + } + + inline_cnstr_jobdesc_hash(desc, pbuf, buf_len, pout, + driver_hash[algo].alg_type, + driver_hash[algo].digestsize, + 0); + + ret = run_descriptor_jr(desc); + + free(desc); + return ret; +} + +void hw_sha256(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (caam_hash(pbuf, buf_len, pout, SHA256)) + printf("CAAM was not setup properly or it is faulty\n"); +} + +void hw_sha1(const unsigned char *pbuf, unsigned int buf_len, + unsigned char *pout, unsigned int chunk_size) +{ + if (caam_hash(pbuf, buf_len, pout, SHA1)) + printf("CAAM was not setup properly or it is faulty\n"); +} diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c new file mode 100644 index 0000000000..1386baec0f --- /dev/null +++ b/drivers/crypto/fsl/jobdesc.c @@ -0,0 +1,125 @@ +/* + * SEC Descriptor Construction Library + * Basic job descriptor construction + * + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include "desc_constr.h" +#include "jobdesc.h" + +#define KEY_BLOB_SIZE 32 +#define MAC_SIZE 16 + +void inline_cnstr_jobdesc_hash(uint32_t *desc, + const uint8_t *msg, uint32_t msgsz, uint8_t *digest, + u32 alg_type, uint32_t alg_size, int sg_tbl) +{ + /* SHA 256 , output is of length 32 words */ + uint32_t storelen = alg_size; + u32 options; + dma_addr_t dma_addr_in, dma_addr_out; + + dma_addr_in = virt_to_phys((void *)msg); + dma_addr_out = virt_to_phys((void *)digest); + + init_job_desc(desc, 0); + append_operation(desc, OP_TYPE_CLASS2_ALG | + OP_ALG_AAI_HASH | OP_ALG_AS_INITFINAL | + OP_ALG_ENCRYPT | OP_ALG_ICV_OFF | alg_type); + + options = LDST_CLASS_2_CCB | FIFOLD_TYPE_MSG | FIFOLD_TYPE_LAST2; + if (sg_tbl) + options |= FIFOLDST_SGF; + if (msgsz > 0xffff) { + options |= FIFOLDST_EXT; + append_fifo_load(desc, dma_addr_in, 0, options); + append_cmd(desc, msgsz); + } else { + append_fifo_load(desc, dma_addr_in, msgsz, options); + } + + append_store(desc, dma_addr_out, storelen, + LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); +} + +void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, + uint8_t *plain_txt, uint8_t *enc_blob, + uint32_t in_sz) +{ + dma_addr_t dma_addr_key_idnfr, dma_addr_in, dma_addr_out; + uint32_t key_sz = KEY_IDNFR_SZ_BYTES; + /* output blob will have 32 bytes key blob in beginning and + * 16 byte HMAC identifier at end of data blob */ + uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE; + + dma_addr_key_idnfr = virt_to_phys((void *)key_idnfr); + dma_addr_in = virt_to_phys((void *)plain_txt); + dma_addr_out = virt_to_phys((void *)enc_blob); + + init_job_desc(desc, 0); + + append_key(desc, dma_addr_key_idnfr, key_sz, CLASS_2); + + append_seq_in_ptr(desc, dma_addr_in, in_sz, 0); + + append_seq_out_ptr(desc, dma_addr_out, out_sz, 0); + + append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB); +} + +void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr, + uint8_t *enc_blob, uint8_t *plain_txt, + uint32_t out_sz) +{ + dma_addr_t dma_addr_key_idnfr, dma_addr_in, dma_addr_out; + uint32_t key_sz = KEY_IDNFR_SZ_BYTES; + uint32_t in_sz = out_sz + KEY_BLOB_SIZE + MAC_SIZE; + + dma_addr_key_idnfr = virt_to_phys((void *)key_idnfr); + dma_addr_in = virt_to_phys((void *)enc_blob); + dma_addr_out = virt_to_phys((void *)plain_txt); + + init_job_desc(desc, 0); + + append_key(desc, dma_addr_key_idnfr, key_sz, CLASS_2); + + append_seq_in_ptr(desc, dma_addr_in, in_sz, 0); + + append_seq_out_ptr(desc, dma_addr_out, out_sz, 0); + + append_operation(desc, OP_TYPE_DECAP_PROTOCOL | OP_PCLID_BLOB); +} + +/* + * Descriptor to instantiate RNG State Handle 0 in normal mode and + * load the JDKEK, TDKEK and TDSK registers + */ +void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc) +{ + u32 *jump_cmd; + + init_job_desc(desc, 0); + + /* INIT RNG in non-test mode */ + append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | + OP_ALG_AS_INIT); + + /* wait for done */ + jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1); + set_jump_tgt_here(desc, jump_cmd); + + /* + * load 1 to clear written reg: + * resets the done interrrupt and returns the RNG to idle. + */ + append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW); + + /* generate secure keys (non-test) */ + append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | + OP_ALG_RNG4_SK); +} diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h new file mode 100644 index 0000000000..3cf7226de2 --- /dev/null +++ b/drivers/crypto/fsl/jobdesc.h @@ -0,0 +1,29 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __JOBDESC_H +#define __JOBDESC_H + +#include <common.h> +#include <asm/io.h> + +#define KEY_IDNFR_SZ_BYTES 16 + +void inline_cnstr_jobdesc_hash(uint32_t *desc, + const uint8_t *msg, uint32_t msgsz, uint8_t *digest, + u32 alg_type, uint32_t alg_size, int sg_tbl); + +void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, + uint8_t *plain_txt, uint8_t *enc_blob, + uint32_t in_sz); + +void inline_cnstr_jobdesc_blob_decap(uint32_t *desc, uint8_t *key_idnfr, + uint8_t *enc_blob, uint8_t *plain_txt, + uint32_t out_sz); + +void inline_cnstr_jobdesc_rng_instantiation(uint32_t *desc); +#endif diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c new file mode 100644 index 0000000000..29681e18a6 --- /dev/null +++ b/drivers/crypto/fsl/jr.c @@ -0,0 +1,462 @@ +/* + * Copyright 2008-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Based on CAAM driver in drivers/crypto/caam in Linux + */ + +#include <common.h> +#include <malloc.h> +#include "fsl_sec.h" +#include "jr.h" +#include "jobdesc.h" + +#define CIRC_CNT(head, tail, size) (((head) - (tail)) & (size - 1)) +#define CIRC_SPACE(head, tail, size) CIRC_CNT((tail), (head) + 1, (size)) + +struct jobring jr; + +static inline void start_jr0(void) +{ + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + u32 ctpr_ms = sec_in32(&sec->ctpr_ms); + u32 scfgr = sec_in32(&sec->scfgr); + + if (ctpr_ms & SEC_CTPR_MS_VIRT_EN_INCL) { + /* VIRT_EN_INCL = 1 & VIRT_EN_POR = 1 or + * VIRT_EN_INCL = 1 & VIRT_EN_POR = 0 & SEC_SCFGR_VIRT_EN = 1 + */ + if ((ctpr_ms & SEC_CTPR_MS_VIRT_EN_POR) || + (!(ctpr_ms & SEC_CTPR_MS_VIRT_EN_POR) && + (scfgr & SEC_SCFGR_VIRT_EN))) + sec_out32(&sec->jrstartr, CONFIG_JRSTARTR_JR0); + } else { + /* VIRT_EN_INCL = 0 && VIRT_EN_POR_VALUE = 1 */ + if (ctpr_ms & SEC_CTPR_MS_VIRT_EN_POR) + sec_out32(&sec->jrstartr, CONFIG_JRSTARTR_JR0); + } +} + +static inline void jr_reset_liodn(void) +{ + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + sec_out32(&sec->jrliodnr[0].ls, 0); +} + +static inline void jr_disable_irq(void) +{ + struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; + uint32_t jrcfg = sec_in32(®s->jrcfg1); + + jrcfg = jrcfg | JR_INTMASK; + + sec_out32(®s->jrcfg1, jrcfg); +} + +static void jr_initregs(void) +{ + struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; + phys_addr_t ip_base = virt_to_phys((void *)jr.input_ring); + phys_addr_t op_base = virt_to_phys((void *)jr.output_ring); + +#ifdef CONFIG_PHYS_64BIT + sec_out32(®s->irba_h, ip_base >> 32); +#else + sec_out32(®s->irba_h, 0x0); +#endif + sec_out32(®s->irba_l, (uint32_t)ip_base); +#ifdef CONFIG_PHYS_64BIT + sec_out32(®s->orba_h, op_base >> 32); +#else + sec_out32(®s->orba_h, 0x0); +#endif + sec_out32(®s->orba_l, (uint32_t)op_base); + sec_out32(®s->ors, JR_SIZE); + sec_out32(®s->irs, JR_SIZE); + + if (!jr.irq) + jr_disable_irq(); +} + +static int jr_init(void) +{ + memset(&jr, 0, sizeof(struct jobring)); + + jr.jq_id = DEFAULT_JR_ID; + jr.irq = DEFAULT_IRQ; + +#ifdef CONFIG_FSL_CORENET + jr.liodn = DEFAULT_JR_LIODN; +#endif + jr.size = JR_SIZE; + jr.input_ring = (dma_addr_t *)malloc(JR_SIZE * sizeof(dma_addr_t)); + if (!jr.input_ring) + return -1; + jr.output_ring = + (struct op_ring *)malloc(JR_SIZE * sizeof(struct op_ring)); + if (!jr.output_ring) + return -1; + + memset(jr.input_ring, 0, JR_SIZE * sizeof(dma_addr_t)); + memset(jr.output_ring, 0, JR_SIZE * sizeof(struct op_ring)); + + start_jr0(); + + jr_initregs(); + + return 0; +} + +static int jr_sw_cleanup(void) +{ + jr.head = 0; + jr.tail = 0; + jr.read_idx = 0; + jr.write_idx = 0; + memset(jr.info, 0, sizeof(jr.info)); + memset(jr.input_ring, 0, jr.size * sizeof(dma_addr_t)); + memset(jr.output_ring, 0, jr.size * sizeof(struct op_ring)); + + return 0; +} + +static int jr_hw_reset(void) +{ + struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; + uint32_t timeout = 100000; + uint32_t jrint, jrcr; + + sec_out32(®s->jrcr, JRCR_RESET); + do { + jrint = sec_in32(®s->jrint); + } while (((jrint & JRINT_ERR_HALT_MASK) == + JRINT_ERR_HALT_INPROGRESS) && --timeout); + + jrint = sec_in32(®s->jrint); + if (((jrint & JRINT_ERR_HALT_MASK) != + JRINT_ERR_HALT_INPROGRESS) && timeout == 0) + return -1; + + timeout = 100000; + sec_out32(®s->jrcr, JRCR_RESET); + do { + jrcr = sec_in32(®s->jrcr); + } while ((jrcr & JRCR_RESET) && --timeout); + + if (timeout == 0) + return -1; + + return 0; +} + +/* -1 --- error, can't enqueue -- no space available */ +static int jr_enqueue(uint32_t *desc_addr, + void (*callback)(uint32_t desc, uint32_t status, void *arg), + void *arg) +{ + struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; + int head = jr.head; + dma_addr_t desc_phys_addr = virt_to_phys(desc_addr); + + if (sec_in32(®s->irsa) == 0 || + CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0) + return -1; + + jr.input_ring[head] = desc_phys_addr; + jr.info[head].desc_phys_addr = desc_phys_addr; + jr.info[head].desc_addr = (uint32_t)desc_addr; + jr.info[head].callback = (void *)callback; + jr.info[head].arg = arg; + jr.info[head].op_done = 0; + + jr.head = (head + 1) & (jr.size - 1); + + sec_out32(®s->irja, 1); + + return 0; +} + +static int jr_dequeue(void) +{ + struct jr_regs *regs = (struct jr_regs *)CONFIG_SYS_FSL_JR0_ADDR; + int head = jr.head; + int tail = jr.tail; + int idx, i, found; + void (*callback)(uint32_t desc, uint32_t status, void *arg); + void *arg = NULL; + + while (sec_in32(®s->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) { + found = 0; + + dma_addr_t op_desc = jr.output_ring[jr.tail].desc; + uint32_t status = jr.output_ring[jr.tail].status; + uint32_t desc_virt; + + for (i = 0; CIRC_CNT(head, tail + i, jr.size) >= 1; i++) { + idx = (tail + i) & (jr.size - 1); + if (op_desc == jr.info[idx].desc_phys_addr) { + desc_virt = jr.info[idx].desc_addr; + found = 1; + break; + } + } + + /* Error condition if match not found */ + if (!found) + return -1; + + jr.info[idx].op_done = 1; + callback = (void *)jr.info[idx].callback; + arg = jr.info[idx].arg; + + /* When the job on tail idx gets done, increment + * tail till the point where job completed out of oredr has + * been taken into account + */ + if (idx == tail) + do { + tail = (tail + 1) & (jr.size - 1); + } while (jr.info[tail].op_done); + + jr.tail = tail; + jr.read_idx = (jr.read_idx + 1) & (jr.size - 1); + + sec_out32(®s->orjr, 1); + jr.info[idx].op_done = 0; + + callback(desc_virt, status, arg); + } + + return 0; +} + +static void desc_done(uint32_t desc, uint32_t status, void *arg) +{ + struct result *x = arg; + x->status = status; + caam_jr_strstatus(status); + x->done = 1; +} + +int run_descriptor_jr(uint32_t *desc) +{ + unsigned long long timeval = get_ticks(); + unsigned long long timeout = usec2ticks(CONFIG_SEC_DEQ_TIMEOUT); + struct result op; + int ret = 0; + + memset(&op, sizeof(op), 0); + + ret = jr_enqueue(desc, desc_done, &op); + if (ret) { + debug("Error in SEC enq\n"); + ret = JQ_ENQ_ERR; + goto out; + } + + timeval = get_ticks(); + timeout = usec2ticks(CONFIG_SEC_DEQ_TIMEOUT); + while (op.done != 1) { + ret = jr_dequeue(); + if (ret) { + debug("Error in SEC deq\n"); + ret = JQ_DEQ_ERR; + goto out; + } + + if ((get_ticks() - timeval) > timeout) { + debug("SEC Dequeue timed out\n"); + ret = JQ_DEQ_TO_ERR; + goto out; + } + } + + if (!op.status) { + debug("Error %x\n", op.status); + ret = op.status; + } +out: + return ret; +} + +int jr_reset(void) +{ + if (jr_hw_reset() < 0) + return -1; + + /* Clean up the jobring structure maintained by software */ + jr_sw_cleanup(); + + return 0; +} + +int sec_reset(void) +{ + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + uint32_t mcfgr = sec_in32(&sec->mcfgr); + uint32_t timeout = 100000; + + mcfgr |= MCFGR_SWRST; + sec_out32(&sec->mcfgr, mcfgr); + + mcfgr |= MCFGR_DMA_RST; + sec_out32(&sec->mcfgr, mcfgr); + do { + mcfgr = sec_in32(&sec->mcfgr); + } while ((mcfgr & MCFGR_DMA_RST) == MCFGR_DMA_RST && --timeout); + + if (timeout == 0) + return -1; + + timeout = 100000; + do { + mcfgr = sec_in32(&sec->mcfgr); + } while ((mcfgr & MCFGR_SWRST) == MCFGR_SWRST && --timeout); + + if (timeout == 0) + return -1; + + return 0; +} + +static int instantiate_rng(void) +{ + struct result op; + u32 *desc; + u32 rdsta_val; + int ret = 0; + ccsr_sec_t __iomem *sec = + (ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + struct rng4tst __iomem *rng = + (struct rng4tst __iomem *)&sec->rng; + + memset(&op, 0, sizeof(struct result)); + + desc = malloc(sizeof(int) * 6); + if (!desc) { + printf("cannot allocate RNG init descriptor memory\n"); + return -1; + } + + inline_cnstr_jobdesc_rng_instantiation(desc); + ret = run_descriptor_jr(desc); + + if (ret) + printf("RNG: Instantiation failed with error %x\n", ret); + + rdsta_val = sec_in32(&rng->rdsta); + if (op.status || !(rdsta_val & RNG_STATE0_HANDLE_INSTANTIATED)) + return -1; + + return ret; +} + +static u8 get_rng_vid(void) +{ + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + u32 cha_vid = sec_in32(&sec->chavid_ls); + + return (cha_vid & SEC_CHAVID_RNG_LS_MASK) >> SEC_CHAVID_LS_RNG_SHIFT; +} + +/* + * By default, the TRNG runs for 200 clocks per sample; + * 1200 clocks per sample generates better entropy. + */ +static void kick_trng(int ent_delay) +{ + ccsr_sec_t __iomem *sec = + (ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + struct rng4tst __iomem *rng = + (struct rng4tst __iomem *)&sec->rng; + u32 val; + + /* put RNG4 into program mode */ + sec_setbits32(&rng->rtmctl, RTMCTL_PRGM); + /* rtsdctl bits 0-15 contain "Entropy Delay, which defines the + * length (in system clocks) of each Entropy sample taken + * */ + val = sec_in32(&rng->rtsdctl); + val = (val & ~RTSDCTL_ENT_DLY_MASK) | + (ent_delay << RTSDCTL_ENT_DLY_SHIFT); + sec_out32(&rng->rtsdctl, val); + /* min. freq. count, equal to 1/4 of the entropy sample length */ + sec_out32(&rng->rtfreqmin, ent_delay >> 2); + /* max. freq. count, equal to 8 times the entropy sample length */ + sec_out32(&rng->rtfreqmax, ent_delay << 3); + /* put RNG4 into run mode */ + sec_clrbits32(&rng->rtmctl, RTMCTL_PRGM); +} + +static int rng_init(void) +{ + int ret, ent_delay = RTSDCTL_ENT_DLY_MIN; + ccsr_sec_t __iomem *sec = + (ccsr_sec_t __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + struct rng4tst __iomem *rng = + (struct rng4tst __iomem *)&sec->rng; + + u32 rdsta = sec_in32(&rng->rdsta); + + /* Check if RNG state 0 handler is already instantiated */ + if (rdsta & RNG_STATE0_HANDLE_INSTANTIATED) + return 0; + + do { + /* + * If either of the SH's were instantiated by somebody else + * then it is assumed that the entropy + * parameters are properly set and thus the function + * setting these (kick_trng(...)) is skipped. + * Also, if a handle was instantiated, do not change + * the TRNG parameters. + */ + kick_trng(ent_delay); + ent_delay += 400; + /* + * if instantiate_rng(...) fails, the loop will rerun + * and the kick_trng(...) function will modfiy the + * upper and lower limits of the entropy sampling + * interval, leading to a sucessful initialization of + * the RNG. + */ + ret = instantiate_rng(); + } while ((ret == -1) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); + if (ret) { + printf("RNG: Failed to instantiate RNG\n"); + return ret; + } + + /* Enable RDB bit so that RNG works faster */ + sec_setbits32(&sec->scfgr, SEC_SCFGR_RDBENABLE); + + return ret; +} + +int sec_init(void) +{ + int ret = 0; + +#ifdef CONFIG_PHYS_64BIT + ccsr_sec_t *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; + uint32_t mcr = sec_in32(&sec->mcfgr); + + sec_out32(&sec->mcfgr, mcr | 1 << MCFGR_PS_SHIFT); +#endif + ret = jr_init(); + if (ret < 0) { + printf("SEC initialization failed\n"); + return -1; + } + + if (get_rng_vid() >= 4) { + if (rng_init() < 0) { + printf("RNG instantiation failed\n"); + return -1; + } + printf("SEC: RNG instantiated\n"); + } + + return ret; +} diff --git a/drivers/crypto/fsl/jr.h b/drivers/crypto/fsl/jr.h new file mode 100644 index 0000000000..cce2c589ce --- /dev/null +++ b/drivers/crypto/fsl/jr.h @@ -0,0 +1,97 @@ +/* + * Copyright 2008-2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __JR_H +#define __JR_H + +#include <linux/compiler.h> + +#define JR_SIZE 4 +/* Timeout currently defined as 90 sec */ +#define CONFIG_SEC_DEQ_TIMEOUT 90000000U + +#define DEFAULT_JR_ID 0 +#define DEFAULT_JR_LIODN 0 +#define DEFAULT_IRQ 0 /* Interrupts not to be configured */ + +#define MCFGR_SWRST ((uint32_t)(1)<<31) /* Software Reset */ +#define MCFGR_DMA_RST ((uint32_t)(1)<<28) /* DMA Reset */ +#define MCFGR_PS_SHIFT 16 +#define JR_INTMASK 0x00000001 +#define JRCR_RESET 0x01 +#define JRINT_ERR_HALT_INPROGRESS 0x4 +#define JRINT_ERR_HALT_MASK 0xc +#define JRNSLIODN_SHIFT 16 +#define JRNSLIODN_MASK 0x0fff0000 +#define JRSLIODN_SHIFT 0 +#define JRSLIODN_MASK 0x00000fff + +#define JQ_DEQ_ERR -1 +#define JQ_DEQ_TO_ERR -2 +#define JQ_ENQ_ERR -3 + +struct op_ring { + dma_addr_t desc; + uint32_t status; +} __packed; + +struct jr_info { + void (*callback)(dma_addr_t desc, uint32_t status, void *arg); + dma_addr_t desc_phys_addr; + uint32_t desc_addr; + uint32_t desc_len; + uint32_t op_done; + void *arg; +}; + +struct jobring { + int jq_id; + int irq; + int liodn; + /* Head is the index where software would enq the descriptor in + * the i/p ring + */ + int head; + /* Tail index would be used by s/w ehile enqueuing to determine if + * there is any space left in the s/w maintained i/p rings + */ + /* Also in case of deq tail will be incremented only in case of + * in-order job completion + */ + int tail; + /* Read index of the output ring. It may not match with tail in case + * of out of order completetion + */ + int read_idx; + /* Write index to input ring. Would be always equal to head */ + int write_idx; + /* Size of the rings. */ + int size; + /* The ip and output rings have to be accessed by SEC. So the + * pointers will ahve to point to the housekeeping region provided + * by SEC + */ + /*Circular Ring of i/p descriptors */ + dma_addr_t *input_ring; + /* Circular Ring of o/p descriptors */ + /* Circula Ring containing info regarding descriptors in i/p + * and o/p ring + */ + /* This ring can be on the stack */ + struct jr_info info[JR_SIZE]; + struct op_ring *output_ring; +}; + +struct result { + int done; + uint32_t status; +}; + +void caam_jr_strstatus(u32 status); +int run_descriptor_jr(uint32_t *desc); + +#endif diff --git a/drivers/dfu/dfu_sf.c b/drivers/dfu/dfu_sf.c index 91f6df220b..c3d3c3bcd8 100644 --- a/drivers/dfu/dfu_sf.c +++ b/drivers/dfu/dfu_sf.c @@ -9,6 +9,7 @@ #include <errno.h> #include <div64.h> #include <dfu.h> +#include <spi.h> #include <spi_flash.h> static long dfu_get_medium_size_sf(struct dfu_entity *dfu) diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index a79c3919dd..4c8fcc2575 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -8,3 +8,5 @@ obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o +obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o +obj-$(CONFIG_TI_EDMA3) += ti-edma3.o diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c new file mode 100644 index 0000000000..77707c2109 --- /dev/null +++ b/drivers/dma/keystone_nav.c @@ -0,0 +1,332 @@ +/* + * Multicore Navigator driver for TI Keystone 2 devices. + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <asm/ti-common/keystone_nav.h> + +struct qm_config qm_memmap = { + .stat_cfg = CONFIG_KSNAV_QM_QUEUE_STATUS_BASE, + .queue = (void *)CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE, + .mngr_vbusm = CONFIG_KSNAV_QM_BASE_ADDRESS, + .i_lram = CONFIG_KSNAV_QM_LINK_RAM_BASE, + .proxy = (void *)CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE, + .status_ram = CONFIG_KSNAV_QM_STATUS_RAM_BASE, + .mngr_cfg = (void *)CONFIG_KSNAV_QM_CONF_BASE, + .intd_cfg = CONFIG_KSNAV_QM_INTD_CONF_BASE, + .desc_mem = (void *)CONFIG_KSNAV_QM_DESC_SETUP_BASE, + .region_num = CONFIG_KSNAV_QM_REGION_NUM, + .pdsp_cmd = CONFIG_KSNAV_QM_PDSP1_CMD_BASE, + .pdsp_ctl = CONFIG_KSNAV_QM_PDSP1_CTRL_BASE, + .pdsp_iram = CONFIG_KSNAV_QM_PDSP1_IRAM_BASE, + .qpool_num = CONFIG_KSNAV_QM_QPOOL_NUM, +}; + +/* + * We are going to use only one type of descriptors - host packet + * descriptors. We staticaly allocate memory for them here + */ +struct qm_host_desc desc_pool[HDESC_NUM] __aligned(sizeof(struct qm_host_desc)); + +static struct qm_config *qm_cfg; + +inline int num_of_desc_to_reg(int num_descr) +{ + int j, num; + + for (j = 0, num = 32; j < 15; j++, num *= 2) { + if (num_descr <= num) + return j; + } + + return 15; +} + +int _qm_init(struct qm_config *cfg) +{ + u32 j; + + qm_cfg = cfg; + + qm_cfg->mngr_cfg->link_ram_base0 = qm_cfg->i_lram; + qm_cfg->mngr_cfg->link_ram_size0 = HDESC_NUM * 8; + qm_cfg->mngr_cfg->link_ram_base1 = 0; + qm_cfg->mngr_cfg->link_ram_size1 = 0; + qm_cfg->mngr_cfg->link_ram_base2 = 0; + + qm_cfg->desc_mem[0].base_addr = (u32)desc_pool; + qm_cfg->desc_mem[0].start_idx = 0; + qm_cfg->desc_mem[0].desc_reg_size = + (((sizeof(struct qm_host_desc) >> 4) - 1) << 16) | + num_of_desc_to_reg(HDESC_NUM); + + memset(desc_pool, 0, sizeof(desc_pool)); + for (j = 0; j < HDESC_NUM; j++) + qm_push(&desc_pool[j], qm_cfg->qpool_num); + + return QM_OK; +} + +int qm_init(void) +{ + return _qm_init(&qm_memmap); +} + +void qm_close(void) +{ + u32 j; + + if (qm_cfg == NULL) + return; + + queue_close(qm_cfg->qpool_num); + + qm_cfg->mngr_cfg->link_ram_base0 = 0; + qm_cfg->mngr_cfg->link_ram_size0 = 0; + qm_cfg->mngr_cfg->link_ram_base1 = 0; + qm_cfg->mngr_cfg->link_ram_size1 = 0; + qm_cfg->mngr_cfg->link_ram_base2 = 0; + + for (j = 0; j < qm_cfg->region_num; j++) { + qm_cfg->desc_mem[j].base_addr = 0; + qm_cfg->desc_mem[j].start_idx = 0; + qm_cfg->desc_mem[j].desc_reg_size = 0; + } + + qm_cfg = NULL; +} + +void qm_push(struct qm_host_desc *hd, u32 qnum) +{ + u32 regd; + + if (!qm_cfg) + return; + + cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); + regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); + writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); +} + +void qm_buff_push(struct qm_host_desc *hd, u32 qnum, + void *buff_ptr, u32 buff_len) +{ + hd->orig_buff_len = buff_len; + hd->buff_len = buff_len; + hd->orig_buff_ptr = (u32)buff_ptr; + hd->buff_ptr = (u32)buff_ptr; + qm_push(hd, qnum); +} + +struct qm_host_desc *qm_pop(u32 qnum) +{ + u32 uhd; + + if (!qm_cfg) + return NULL; + + uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; + if (uhd) + cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); + + return (struct qm_host_desc *)uhd; +} + +struct qm_host_desc *qm_pop_from_free_pool(void) +{ + if (!qm_cfg) + return NULL; + + return qm_pop(qm_cfg->qpool_num); +} + +void queue_close(u32 qnum) +{ + struct qm_host_desc *hd; + + while ((hd = qm_pop(qnum))) + ; +} + +/** + * DMA API + */ + +static int ksnav_rx_disable(struct pktdma_cfg *pktdma) +{ + u32 j, v, k; + + for (j = 0; j < pktdma->rx_ch_num; j++) { + v = readl(&pktdma->rx_ch[j].cfg_a); + if (!(v & CPDMA_CHAN_A_ENABLE)) + continue; + + writel(v | CPDMA_CHAN_A_TDOWN, &pktdma->rx_ch[j].cfg_a); + for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) { + udelay(100); + v = readl(&pktdma->rx_ch[j].cfg_a); + if (!(v & CPDMA_CHAN_A_ENABLE)) + continue; + } + /* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */ + } + + /* Clear all of the flow registers */ + for (j = 0; j < pktdma->rx_flow_num; j++) { + writel(0, &pktdma->rx_flows[j].control); + writel(0, &pktdma->rx_flows[j].tags); + writel(0, &pktdma->rx_flows[j].tag_sel); + writel(0, &pktdma->rx_flows[j].fdq_sel[0]); + writel(0, &pktdma->rx_flows[j].fdq_sel[1]); + writel(0, &pktdma->rx_flows[j].thresh[0]); + writel(0, &pktdma->rx_flows[j].thresh[1]); + writel(0, &pktdma->rx_flows[j].thresh[2]); + } + + return QM_OK; +} + +static int ksnav_tx_disable(struct pktdma_cfg *pktdma) +{ + u32 j, v, k; + + for (j = 0; j < pktdma->tx_ch_num; j++) { + v = readl(&pktdma->tx_ch[j].cfg_a); + if (!(v & CPDMA_CHAN_A_ENABLE)) + continue; + + writel(v | CPDMA_CHAN_A_TDOWN, &pktdma->tx_ch[j].cfg_a); + for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) { + udelay(100); + v = readl(&pktdma->tx_ch[j].cfg_a); + if (!(v & CPDMA_CHAN_A_ENABLE)) + continue; + } + /* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */ + } + + return QM_OK; +} + +int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers) +{ + u32 j, v; + struct qm_host_desc *hd; + u8 *rx_ptr; + + if (pktdma == NULL || rx_buffers == NULL || + rx_buffers->buff_ptr == NULL || qm_cfg == NULL) + return QM_ERR; + + pktdma->rx_flow = rx_buffers->rx_flow; + + /* init rx queue */ + rx_ptr = rx_buffers->buff_ptr; + + for (j = 0; j < rx_buffers->num_buffs; j++) { + hd = qm_pop(qm_cfg->qpool_num); + if (hd == NULL) + return QM_ERR; + + qm_buff_push(hd, pktdma->rx_free_q, + rx_ptr, rx_buffers->buff_len); + + rx_ptr += rx_buffers->buff_len; + } + + ksnav_rx_disable(pktdma); + + /* configure rx channels */ + v = CPDMA_REG_VAL_MAKE_RX_FLOW_A(1, 1, 0, 0, 0, 0, 0, pktdma->rx_rcv_q); + writel(v, &pktdma->rx_flows[pktdma->rx_flow].control); + writel(0, &pktdma->rx_flows[pktdma->rx_flow].tags); + writel(0, &pktdma->rx_flows[pktdma->rx_flow].tag_sel); + + v = CPDMA_REG_VAL_MAKE_RX_FLOW_D(0, pktdma->rx_free_q, 0, + pktdma->rx_free_q); + + writel(v, &pktdma->rx_flows[pktdma->rx_flow].fdq_sel[0]); + writel(v, &pktdma->rx_flows[pktdma->rx_flow].fdq_sel[1]); + writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[0]); + writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[1]); + writel(0, &pktdma->rx_flows[pktdma->rx_flow].thresh[2]); + + for (j = 0; j < pktdma->rx_ch_num; j++) + writel(CPDMA_CHAN_A_ENABLE, &pktdma->rx_ch[j].cfg_a); + + /* configure tx channels */ + /* Disable loopback in the tx direction */ + writel(0, &pktdma->global->emulation_control); + + /* Set QM base address, only for K2x devices */ + writel(CONFIG_KSNAV_QM_BASE_ADDRESS, &pktdma->global->qm_base_addr[0]); + + /* Enable all channels. The current state isn't important */ + for (j = 0; j < pktdma->tx_ch_num; j++) { + writel(0, &pktdma->tx_ch[j].cfg_b); + writel(CPDMA_CHAN_A_ENABLE, &pktdma->tx_ch[j].cfg_a); + } + + return QM_OK; +} + +int ksnav_close(struct pktdma_cfg *pktdma) +{ + if (!pktdma) + return QM_ERR; + + ksnav_tx_disable(pktdma); + ksnav_rx_disable(pktdma); + + queue_close(pktdma->rx_free_q); + queue_close(pktdma->rx_rcv_q); + queue_close(pktdma->tx_snd_q); + + return QM_OK; +} + +int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2) +{ + struct qm_host_desc *hd; + + hd = qm_pop(qm_cfg->qpool_num); + if (hd == NULL) + return QM_ERR; + + hd->desc_info = num_bytes; + hd->swinfo[2] = swinfo2; + hd->packet_info = qm_cfg->qpool_num; + + qm_buff_push(hd, pktdma->tx_snd_q, pkt, num_bytes); + + return QM_OK; +} + +void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes) +{ + struct qm_host_desc *hd; + + hd = qm_pop(pktdma->rx_rcv_q); + if (!hd) + return NULL; + + *pkt = (u32 *)hd->buff_ptr; + *num_bytes = hd->desc_info & 0x3fffff; + + return hd; +} + +void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd) +{ + struct qm_host_desc *_hd = (struct qm_host_desc *)hd; + + _hd->buff_len = _hd->orig_buff_len; + _hd->buff_ptr = _hd->orig_buff_ptr; + + qm_push(_hd, pktdma->rx_free_q); +} diff --git a/drivers/dma/keystone_nav_cfg.c b/drivers/dma/keystone_nav_cfg.c new file mode 100644 index 0000000000..bdd30a0262 --- /dev/null +++ b/drivers/dma/keystone_nav_cfg.c @@ -0,0 +1,27 @@ +/* + * Multicore Navigator driver for TI Keystone 2 devices. + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/ti-common/keystone_nav.h> + +#ifdef CONFIG_KSNAV_PKTDMA_NETCP +/* NETCP Pktdma */ +struct pktdma_cfg netcp_pktdma = { + .global = (void *)CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE, + .tx_ch = (void *)CONFIG_KSNAV_NETCP_PDMA_TX_BASE, + .tx_ch_num = CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM, + .rx_ch = (void *)CONFIG_KSNAV_NETCP_PDMA_RX_BASE, + .rx_ch_num = CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM, + .tx_sched = (u32 *)CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE, + .rx_flows = (void *)CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE, + .rx_flow_num = CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM, + .rx_free_q = CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE, + .rx_rcv_q = CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE, + .tx_snd_q = CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE, +}; +#endif diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c new file mode 100644 index 0000000000..8184ded9fa --- /dev/null +++ b/drivers/dma/ti-edma3.c @@ -0,0 +1,384 @@ +/* + * Enhanced Direct Memory Access (EDMA3) Controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/io.h> +#include <common.h> +#include <asm/ti-common/ti-edma3.h> + +#define EDMA3_SL_BASE(slot) (0x4000 + ((slot) << 5)) +#define EDMA3_SL_MAX_NUM 512 +#define EDMA3_SLOPT_FIFO_WIDTH_MASK (0x7 << 8) + +#define EDMA3_QCHMAP(ch) 0x0200 + ((ch) << 2) +#define EDMA3_CHMAP_PARSET_MASK 0x1ff +#define EDMA3_CHMAP_PARSET_SHIFT 0x5 +#define EDMA3_CHMAP_TRIGWORD_SHIFT 0x2 + +#define EDMA3_QEMCR 0x314 +#define EDMA3_IPR 0x1068 +#define EDMA3_IPRH 0x106c +#define EDMA3_ICR 0x1070 +#define EDMA3_ICRH 0x1074 +#define EDMA3_QEECR 0x1088 +#define EDMA3_QEESR 0x108c +#define EDMA3_QSECR 0x1094 + +/** + * qedma3_start - start qdma on a channel + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config where you can set + * the slot number to associate with, the chnum, which corresponds + * your quick channel number 0-7, complete code - transfer complete code + * and trigger slot word - which has to correspond to the word number in + * edma3_slot_layout struct for generating event. + * + */ +void qedma3_start(u32 base, struct edma3_channel_config *cfg) +{ + u32 qchmap; + + /* Clear the pending int bit */ + if (cfg->complete_code < 32) + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR); + else + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH); + + /* Map parameter set and trigger word 7 to quick channel */ + qchmap = ((EDMA3_CHMAP_PARSET_MASK & cfg->slot) + << EDMA3_CHMAP_PARSET_SHIFT) | + (cfg->trigger_slot_word << EDMA3_CHMAP_TRIGWORD_SHIFT); + + __raw_writel(qchmap, base + EDMA3_QCHMAP(cfg->chnum)); + + /* Clear missed event if set*/ + __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR); + __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR); + + /* Enable qdma channel event */ + __raw_writel(1 << cfg->chnum, base + EDMA3_QEESR); +} + +/** + * edma3_set_dest - set initial DMA destination address in parameter RAM slot + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @dst: physical address of destination (memory, controller FIFO, etc) + * @addressMode: INCR, except in very rare cases + * @width: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the destination address is modified during the DMA transfer + * according to edma3_set_dest_index(). + */ +void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode, + enum edma3_fifo_width width) +{ + u32 opt; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + opt = __raw_readl(&rg->opt); + if (mode == FIFO) + opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) | + (EDMA3_SLOPT_DST_ADDR_CONST_MODE | + EDMA3_SLOPT_FIFO_WIDTH_SET(width)); + else + opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE; + + __raw_writel(opt, &rg->opt); + __raw_writel(dst, &rg->dst); +} + +/** + * edma3_set_dest_index - configure DMA destination address indexing + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @bidx: byte offset between destination arrays in a frame + * @cidx: byte offset between destination frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx) +{ + u32 src_dst_bidx; + u32 src_dst_cidx; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + src_dst_bidx = __raw_readl(&rg->src_dst_bidx); + src_dst_cidx = __raw_readl(&rg->src_dst_cidx); + + __raw_writel((src_dst_bidx & 0x0000ffff) | (bidx << 16), + &rg->src_dst_bidx); + __raw_writel((src_dst_cidx & 0x0000ffff) | (cidx << 16), + &rg->src_dst_cidx); +} + +/** + * edma3_set_dest_addr - set destination address for slot only + */ +void edma3_set_dest_addr(u32 base, int slot, u32 dst) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + __raw_writel(dst, &rg->dst); +} + +/** + * edma3_set_src - set initial DMA source address in parameter RAM slot + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @src_port: physical address of source (memory, controller FIFO, etc) + * @mode: INCR, except in very rare cases + * @width: ignored unless @addressMode is FIFO, else specifies the + * width to use when addressing the fifo (e.g. W8BIT, W32BIT) + * + * Note that the source address is modified during the DMA transfer + * according to edma3_set_src_index(). + */ +void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode, + enum edma3_fifo_width width) +{ + u32 opt; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + opt = __raw_readl(&rg->opt); + if (mode == FIFO) + opt = (opt & EDMA3_SLOPT_FIFO_WIDTH_MASK) | + (EDMA3_SLOPT_DST_ADDR_CONST_MODE | + EDMA3_SLOPT_FIFO_WIDTH_SET(width)); + else + opt &= ~EDMA3_SLOPT_DST_ADDR_CONST_MODE; + + __raw_writel(opt, &rg->opt); + __raw_writel(src, &rg->src); +} + +/** + * edma3_set_src_index - configure DMA source address indexing + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @bidx: byte offset between source arrays in a frame + * @cidx: byte offset between source frames in a block + * + * Offsets are specified to support either contiguous or discontiguous + * memory transfers, or repeated access to a hardware register, as needed. + * When accessing hardware registers, both offsets are normally zero. + */ +void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx) +{ + u32 src_dst_bidx; + u32 src_dst_cidx; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + src_dst_bidx = __raw_readl(&rg->src_dst_bidx); + src_dst_cidx = __raw_readl(&rg->src_dst_cidx); + + __raw_writel((src_dst_bidx & 0xffff0000) | bidx, + &rg->src_dst_bidx); + __raw_writel((src_dst_cidx & 0xffff0000) | cidx, + &rg->src_dst_cidx); +} + +/** + * edma3_set_src_addr - set source address for slot only + */ +void edma3_set_src_addr(u32 base, int slot, u32 src) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + __raw_writel(src, &rg->src); +} + +/** + * edma3_set_transfer_params - configure DMA transfer parameters + * @base: base address of edma + * @slot: parameter RAM slot being configured + * @acnt: how many bytes per array (at least one) + * @bcnt: how many arrays per frame (at least one) + * @ccnt: how many frames per block (at least one) + * @bcnt_rld: used only for A-Synchronized transfers; this specifies + * the value to reload into bcnt when it decrements to zero + * @sync_mode: ASYNC or ABSYNC + * + * See the EDMA3 documentation to understand how to configure and link + * transfers using the fields in PaRAM slots. If you are not doing it + * all at once with edma3_write_slot(), you will use this routine + * plus two calls each for source and destination, setting the initial + * address and saying how to index that address. + * + * An example of an A-Synchronized transfer is a serial link using a + * single word shift register. In that case, @acnt would be equal to + * that word size; the serial controller issues a DMA synchronization + * event to transfer each word, and memory access by the DMA transfer + * controller will be word-at-a-time. + * + * An example of an AB-Synchronized transfer is a device using a FIFO. + * In that case, @acnt equals the FIFO width and @bcnt equals its depth. + * The controller with the FIFO issues DMA synchronization events when + * the FIFO threshold is reached, and the DMA transfer controller will + * transfer one frame to (or from) the FIFO. It will probably use + * efficient burst modes to access memory. + */ +void edma3_set_transfer_params(u32 base, int slot, int acnt, + int bcnt, int ccnt, u16 bcnt_rld, + enum edma3_sync_dimension sync_mode) +{ + u32 opt; + u32 link_bcntrld; + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + link_bcntrld = __raw_readl(&rg->link_bcntrld); + + __raw_writel((bcnt_rld << 16) | (0x0000ffff & link_bcntrld), + &rg->link_bcntrld); + + opt = __raw_readl(&rg->opt); + if (sync_mode == ASYNC) + __raw_writel(opt & ~EDMA3_SLOPT_AB_SYNC, &rg->opt); + else + __raw_writel(opt | EDMA3_SLOPT_AB_SYNC, &rg->opt); + + /* Set the acount, bcount, ccount registers */ + __raw_writel((bcnt << 16) | (acnt & 0xffff), &rg->a_b_cnt); + __raw_writel(0xffff & ccnt, &rg->ccnt); +} + +/** + * edma3_write_slot - write parameter RAM data for slot + * @base: base address of edma + * @slot: number of parameter RAM slot being modified + * @param: data to be written into parameter RAM slot + * + * Use this to assign all parameters of a transfer at once. This + * allows more efficient setup of transfers than issuing multiple + * calls to set up those parameters in small pieces, and provides + * complete control over all transfer options. + */ +void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param) +{ + int i; + u32 *p = (u32 *)param; + u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot)); + + for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4) + __raw_writel(*p++, addr++); +} + +/** + * edma3_read_slot - read parameter RAM data from slot + * @base: base address of edma + * @slot: number of parameter RAM slot being copied + * @param: where to store copy of parameter RAM data + * + * Use this to read data from a parameter RAM slot, perhaps to + * save them as a template for later reuse. + */ +void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param) +{ + int i; + u32 *p = (u32 *)param; + u32 *addr = (u32 *)(base + EDMA3_SL_BASE(slot)); + + for (i = 0; i < sizeof(struct edma3_slot_layout)/4; i += 4) + *p++ = __raw_readl(addr++); +} + +void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg) +{ + struct edma3_slot_layout *rg; + + rg = (struct edma3_slot_layout *)(base + EDMA3_SL_BASE(slot)); + + __raw_writel(cfg->opt, &rg->opt); + __raw_writel(cfg->src, &rg->src); + __raw_writel((cfg->bcnt << 16) | (cfg->acnt & 0xffff), &rg->a_b_cnt); + __raw_writel(cfg->dst, &rg->dst); + __raw_writel((cfg->dst_bidx << 16) | + (cfg->src_bidx & 0xffff), &rg->src_dst_bidx); + __raw_writel((cfg->bcntrld << 16) | + (cfg->link & 0xffff), &rg->link_bcntrld); + __raw_writel((cfg->dst_cidx << 16) | + (cfg->src_cidx & 0xffff), &rg->src_dst_cidx); + __raw_writel(0xffff & cfg->ccnt, &rg->ccnt); +} + +/** + * edma3_check_for_transfer - check if transfer coplete by checking + * interrupt pending bit. Clear interrupt pending bit if complete. + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config which was passed + * to qedma3_start when you started qdma channel + * + * Return 0 if complete, 1 if not. + */ +int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg) +{ + u32 inum; + u32 ipr_base; + u32 icr_base; + + if (cfg->complete_code < 32) { + ipr_base = base + EDMA3_IPR; + icr_base = base + EDMA3_ICR; + inum = 1 << cfg->complete_code; + } else { + ipr_base = base + EDMA3_IPRH; + icr_base = base + EDMA3_ICRH; + inum = 1 << (cfg->complete_code - 32); + } + + /* check complete interrupt */ + if (!(__raw_readl(ipr_base) & inum)) + return 1; + + /* clean up the pending int bit */ + __raw_writel(inum, icr_base); + + return 0; +} + +/** + * qedma3_stop - stops dma on the channel passed + * @base: base address of edma + * @cfg: pinter to struct edma3_channel_config which was passed + * to qedma3_start when you started qdma channel + */ +void qedma3_stop(u32 base, struct edma3_channel_config *cfg) +{ + /* Disable qdma channel event */ + __raw_writel(1 << cfg->chnum, base + EDMA3_QEECR); + + /* clean up the interrupt indication */ + if (cfg->complete_code < 32) + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICR); + else + __raw_writel(1 << cfg->complete_code, base + EDMA3_ICRH); + + /* Clear missed event if set*/ + __raw_writel(1 << cfg->chnum, base + EDMA3_QSECR); + __raw_writel(1 << cfg->chnum, base + EDMA3_QEMCR); + + /* Clear the channel map */ + __raw_writel(0, base + EDMA3_QCHMAP(cfg->chnum)); +} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e69de29bb2..d21302f8da 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -0,0 +1,6 @@ +config DM_GPIO + bool "Enable Driver Model for GPIO drivers" + depends on DM + help + If you want to use driver model for GPIO drivers, say Y. + To use legacy GPIO drivers, say N. diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c index 97b5137114..0244c01882 100644 --- a/drivers/gpio/bcm2835_gpio.c +++ b/drivers/gpio/bcm2835_gpio.c @@ -6,73 +6,118 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <asm/gpio.h> #include <asm/io.h> -inline int gpio_is_valid(unsigned gpio) -{ - return (gpio < BCM2835_GPIO_COUNT); -} - -int gpio_request(unsigned gpio, const char *label) -{ - return !gpio_is_valid(gpio); -} +struct bcm2835_gpios { + struct bcm2835_gpio_regs *reg; +}; -int gpio_free(unsigned gpio) +static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio) { - return 0; -} - -int gpio_direction_input(unsigned gpio) -{ - struct bcm2835_gpio_regs *reg = - (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + struct bcm2835_gpios *gpios = dev_get_priv(dev); unsigned val; - val = readl(®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio)); val |= (BCM2835_GPIO_INPUT << BCM2835_GPIO_FSEL_SHIFT(gpio)); - writel(val, ®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + writel(val, &gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); return 0; } -int gpio_direction_output(unsigned gpio, int value) +static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned gpio, + int value) { - struct bcm2835_gpio_regs *reg = - (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + struct bcm2835_gpios *gpios = dev_get_priv(dev); unsigned val; gpio_set_value(gpio, value); - val = readl(®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio)); val |= (BCM2835_GPIO_OUTPUT << BCM2835_GPIO_FSEL_SHIFT(gpio)); - writel(val, ®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + writel(val, &gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); return 0; } -int gpio_get_value(unsigned gpio) +static bool bcm2835_gpio_is_output(const struct bcm2835_gpios *gpios, int gpio) +{ + u32 val; + + val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + val &= BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio); + return val ? true : false; +} + +static int bcm2835_get_value(const struct bcm2835_gpios *gpios, unsigned gpio) { - struct bcm2835_gpio_regs *reg = - (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; unsigned val; - val = readl(®->gplev[BCM2835_GPIO_COMMON_BANK(gpio)]); + val = readl(&gpios->reg->gplev[BCM2835_GPIO_COMMON_BANK(gpio)]); return (val >> BCM2835_GPIO_COMMON_SHIFT(gpio)) & 0x1; } -int gpio_set_value(unsigned gpio, int value) +static int bcm2835_gpio_get_value(struct udevice *dev, unsigned gpio) +{ + const struct bcm2835_gpios *gpios = dev_get_priv(dev); + + return bcm2835_get_value(gpios, gpio); +} + +static int bcm2835_gpio_set_value(struct udevice *dev, unsigned gpio, + int value) { - struct bcm2835_gpio_regs *reg = - (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; - u32 *output_reg = value ? reg->gpset : reg->gpclr; + struct bcm2835_gpios *gpios = dev_get_priv(dev); + u32 *output_reg = value ? gpios->reg->gpset : gpios->reg->gpclr; writel(1 << BCM2835_GPIO_COMMON_SHIFT(gpio), &output_reg[BCM2835_GPIO_COMMON_BANK(gpio)]); return 0; } + +static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct bcm2835_gpios *gpios = dev_get_priv(dev); + + /* GPIOF_FUNC is not implemented yet */ + if (bcm2835_gpio_is_output(gpios, offset)) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + + +static const struct dm_gpio_ops gpio_bcm2835_ops = { + .direction_input = bcm2835_gpio_direction_input, + .direction_output = bcm2835_gpio_direction_output, + .get_value = bcm2835_gpio_get_value, + .set_value = bcm2835_gpio_set_value, + .get_function = bcm2835_gpio_get_function, +}; + +static int bcm2835_gpio_probe(struct udevice *dev) +{ + struct bcm2835_gpios *gpios = dev_get_priv(dev); + struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + uc_priv->bank_name = "GPIO"; + uc_priv->gpio_count = BCM2835_GPIO_COUNT; + gpios->reg = (struct bcm2835_gpio_regs *)plat->base; + + return 0; +} + +U_BOOT_DRIVER(gpio_bcm2835) = { + .name = "gpio_bcm2835", + .id = UCLASS_GPIO, + .ops = &gpio_bcm2835_ops, + .probe = bcm2835_gpio_probe, + .priv_auto_alloc_size = sizeof(struct bcm2835_gpios), +}; diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index f1bbc58796..45e9a5ad22 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -7,7 +7,9 @@ #include <common.h> #include <dm.h> #include <errno.h> +#include <malloc.h> #include <asm/gpio.h> +#include <linux/ctype.h> /** * gpio_to_device() - Convert global GPIO number to device, number @@ -43,35 +45,47 @@ static int gpio_to_device(unsigned int gpio, struct udevice **devp, int gpio_lookup_name(const char *name, struct udevice **devp, unsigned int *offsetp, unsigned int *gpiop) { - struct gpio_dev_priv *uc_priv; + struct gpio_dev_priv *uc_priv = NULL; struct udevice *dev; + ulong offset; + int numeric; int ret; if (devp) *devp = NULL; + numeric = isdigit(*name) ? simple_strtoul(name, NULL, 10) : -1; for (ret = uclass_first_device(UCLASS_GPIO, &dev); dev; ret = uclass_next_device(&dev)) { - ulong offset; int len; uc_priv = dev->uclass_priv; + if (numeric != -1) { + offset = numeric - uc_priv->gpio_base; + /* Allow GPIOs to be numbered from 0 */ + if (offset >= 0 && offset < uc_priv->gpio_count) + break; + } + len = uc_priv->bank_name ? strlen(uc_priv->bank_name) : 0; if (!strncasecmp(name, uc_priv->bank_name, len)) { - if (strict_strtoul(name + len, 10, &offset)) - continue; - if (devp) - *devp = dev; - if (offsetp) - *offsetp = offset; - if (gpiop) - *gpiop = uc_priv->gpio_base + offset; - return 0; + if (!strict_strtoul(name + len, 10, &offset)) + break; } } - return ret ? ret : -EINVAL; + if (!dev) + return ret ? ret : -EINVAL; + + if (devp) + *devp = dev; + if (offsetp) + *offsetp = offset; + if (gpiop) + *gpiop = uc_priv->gpio_base + offset; + + return 0; } /** @@ -79,24 +93,62 @@ int gpio_lookup_name(const char *name, struct udevice **devp, * gpio: GPIO number * label: Name for the requested GPIO * + * The label is copied and allocated so the caller does not need to keep + * the pointer around. + * * This function implements the API that's compatible with current * GPIO API used in U-Boot. The request is forwarded to particular * GPIO driver. Returns 0 on success, negative value on error. */ int gpio_request(unsigned gpio, const char *label) { + struct gpio_dev_priv *uc_priv; unsigned int offset; struct udevice *dev; + char *str; int ret; ret = gpio_to_device(gpio, &dev, &offset); if (ret) return ret; - if (!gpio_get_ops(dev)->request) - return 0; + uc_priv = dev->uclass_priv; + if (uc_priv->name[offset]) + return -EBUSY; + str = strdup(label); + if (!str) + return -ENOMEM; + if (gpio_get_ops(dev)->request) { + ret = gpio_get_ops(dev)->request(dev, offset, label); + if (ret) { + free(str); + return ret; + } + } + uc_priv->name[offset] = str; + + return 0; +} + +/** + * gpio_requestf() - [COMPAT] Request GPIO + * @gpio: GPIO number + * @fmt: Format string for the requested GPIO + * @...: Arguments for the printf() format string + * + * This function implements the API that's compatible with current + * GPIO API used in U-Boot. The request is forwarded to particular + * GPIO driver. Returns 0 on success, negative value on error. + */ +int gpio_requestf(unsigned gpio, const char *fmt, ...) +{ + va_list args; + char buf[40]; - return gpio_get_ops(dev)->request(dev, offset, label); + va_start(args, fmt); + vscnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + return gpio_request(gpio, buf); } /** @@ -109,6 +161,7 @@ int gpio_request(unsigned gpio, const char *label) */ int gpio_free(unsigned gpio) { + struct gpio_dev_priv *uc_priv; unsigned int offset; struct udevice *dev; int ret; @@ -117,9 +170,34 @@ int gpio_free(unsigned gpio) if (ret) return ret; - if (!gpio_get_ops(dev)->free) - return 0; - return gpio_get_ops(dev)->free(dev, offset); + uc_priv = dev->uclass_priv; + if (!uc_priv->name[offset]) + return -ENXIO; + if (gpio_get_ops(dev)->free) { + ret = gpio_get_ops(dev)->free(dev, offset); + if (ret) + return ret; + } + + free(uc_priv->name[offset]); + uc_priv->name[offset] = NULL; + + return 0; +} + +static int check_reserved(struct udevice *dev, unsigned offset, + const char *func) +{ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + if (!uc_priv->name[offset]) { + printf("%s: %s: error: gpio %s%d not reserved\n", + dev->name, func, + uc_priv->bank_name ? uc_priv->bank_name : "", offset); + return -EBUSY; + } + + return 0; } /** @@ -139,8 +217,9 @@ int gpio_direction_input(unsigned gpio) ret = gpio_to_device(gpio, &dev, &offset); if (ret) return ret; + ret = check_reserved(dev, offset, "dir_input"); - return gpio_get_ops(dev)->direction_input(dev, offset); + return ret ? ret : gpio_get_ops(dev)->direction_input(dev, offset); } /** @@ -161,8 +240,10 @@ int gpio_direction_output(unsigned gpio, int value) ret = gpio_to_device(gpio, &dev, &offset); if (ret) return ret; + ret = check_reserved(dev, offset, "dir_output"); - return gpio_get_ops(dev)->direction_output(dev, offset, value); + return ret ? ret : + gpio_get_ops(dev)->direction_output(dev, offset, value); } /** @@ -183,8 +264,9 @@ int gpio_get_value(unsigned gpio) ret = gpio_to_device(gpio, &dev, &offset); if (ret) return ret; + ret = check_reserved(dev, offset, "get_value"); - return gpio_get_ops(dev)->get_value(dev, offset); + return ret ? ret : gpio_get_ops(dev)->get_value(dev, offset); } /** @@ -205,8 +287,9 @@ int gpio_set_value(unsigned gpio, int value) ret = gpio_to_device(gpio, &dev, &offset); if (ret) return ret; + ret = check_reserved(dev, offset, "set_value"); - return gpio_get_ops(dev)->set_value(dev, offset, value); + return ret ? ret : gpio_get_ops(dev)->set_value(dev, offset, value); } const char *gpio_get_bank_info(struct udevice *dev, int *bit_count) @@ -221,8 +304,94 @@ const char *gpio_get_bank_info(struct udevice *dev, int *bit_count) return priv->bank_name; } +static const char * const gpio_function[GPIOF_COUNT] = { + "input", + "output", + "unused", + "unknown", + "func", +}; + +int get_function(struct udevice *dev, int offset, bool skip_unused, + const char **namep) +{ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct dm_gpio_ops *ops = gpio_get_ops(dev); + + BUILD_BUG_ON(GPIOF_COUNT != ARRAY_SIZE(gpio_function)); + if (!device_active(dev)) + return -ENODEV; + if (offset < 0 || offset >= uc_priv->gpio_count) + return -EINVAL; + if (namep) + *namep = uc_priv->name[offset]; + if (skip_unused && !uc_priv->name[offset]) + return GPIOF_UNUSED; + if (ops->get_function) { + int ret; + + ret = ops->get_function(dev, offset); + if (ret < 0) + return ret; + if (ret >= ARRAY_SIZE(gpio_function)) + return -ENODATA; + return ret; + } + + return GPIOF_UNKNOWN; +} + +int gpio_get_function(struct udevice *dev, int offset, const char **namep) +{ + return get_function(dev, offset, true, namep); +} + +int gpio_get_raw_function(struct udevice *dev, int offset, const char **namep) +{ + return get_function(dev, offset, false, namep); +} + +int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize) +{ + struct dm_gpio_ops *ops = gpio_get_ops(dev); + struct gpio_dev_priv *priv; + char *str = buf; + int func; + int ret; + int len; + + BUILD_BUG_ON(GPIOF_COUNT != ARRAY_SIZE(gpio_function)); + + *buf = 0; + priv = dev->uclass_priv; + ret = gpio_get_raw_function(dev, offset, NULL); + if (ret < 0) + return ret; + func = ret; + len = snprintf(str, buffsize, "%s%d: %s", + priv->bank_name ? priv->bank_name : "", + offset, gpio_function[func]); + if (func == GPIOF_INPUT || func == GPIOF_OUTPUT || + func == GPIOF_UNUSED) { + const char *label; + bool used; + + ret = ops->get_value(dev, offset); + if (ret < 0) + return ret; + used = gpio_get_function(dev, offset, &label) != GPIOF_UNUSED; + snprintf(str + len, buffsize - len, ": %d [%c]%s%s", + ret, + used ? 'x' : ' ', + used ? " " : "", + label ? label : ""); + } + + return 0; +} + /* We need to renumber the GPIOs when any driver is probed/removed */ -static int gpio_renumber(void) +static int gpio_renumber(struct udevice *removed_dev) { struct gpio_dev_priv *uc_priv; struct udevice *dev; @@ -237,7 +406,7 @@ static int gpio_renumber(void) /* Ensure that we have a base for each bank */ base = 0; uclass_foreach_dev(dev, uc) { - if (device_active(dev)) { + if (device_active(dev) && dev != removed_dev) { uc_priv = dev->uclass_priv; uc_priv->gpio_base = base; base += uc_priv->gpio_count; @@ -249,12 +418,27 @@ static int gpio_renumber(void) static int gpio_post_probe(struct udevice *dev) { - return gpio_renumber(); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + uc_priv->name = calloc(uc_priv->gpio_count, sizeof(char *)); + if (!uc_priv->name) + return -ENOMEM; + + return gpio_renumber(NULL); } static int gpio_pre_remove(struct udevice *dev) { - return gpio_renumber(); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + int i; + + for (i = 0; i < uc_priv->gpio_count; i++) { + if (uc_priv->name[i]) + free(uc_priv->name[i]); + } + free(uc_priv->name); + + return gpio_renumber(dev); } UCLASS_DRIVER(gpio) = { diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c index 7d9fac7233..d3381b0369 100644 --- a/drivers/gpio/intel_ich6_gpio.c +++ b/drivers/gpio/intel_ich6_gpio.c @@ -27,88 +27,46 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> #include <pci.h> #include <asm/gpio.h> #include <asm/io.h> +#define GPIO_PER_BANK 32 + /* Where in config space is the register that points to the GPIO registers? */ #define PCI_CFG_GPIOBASE 0x48 -#define NUM_BANKS 3 - -/* Within the I/O space, where are the registers to control the GPIOs? */ -static struct { - u8 use_sel; - u8 io_sel; - u8 lvl; -} gpio_bank[NUM_BANKS] = { - { 0x00, 0x04, 0x0c }, /* Bank 0 */ - { 0x30, 0x34, 0x38 }, /* Bank 1 */ - { 0x40, 0x44, 0x48 } /* Bank 2 */ +struct ich6_bank_priv { + /* These are I/O addresses */ + uint32_t use_sel; + uint32_t io_sel; + uint32_t lvl; }; -static pci_dev_t dev; /* handle for 0:1f:0 */ -static u32 gpiobase; /* offset into I/O space */ -static int found_it_once; /* valid GPIO device? */ -static u32 lock[NUM_BANKS]; /* "lock" for access to pins */ - -static int bad_arg(int num, int *bank, int *bitnum) -{ - int i = num / 32; - int j = num % 32; - - if (num < 0 || i > NUM_BANKS) { - debug("%s: bogus gpio num: %d\n", __func__, num); - return -1; - } - *bank = i; - *bitnum = j; - return 0; -} - -static int mark_gpio(int bank, int bitnum) -{ - if (lock[bank] & (1UL << bitnum)) { - debug("%s: %d.%d already marked\n", __func__, bank, bitnum); - return -1; - } - lock[bank] |= (1 << bitnum); - return 0; -} - -static void clear_gpio(int bank, int bitnum) -{ - lock[bank] &= ~(1 << bitnum); -} - -static int notmine(int num, int *bank, int *bitnum) -{ - if (bad_arg(num, bank, bitnum)) - return -1; - return !(lock[*bank] & (1UL << *bitnum)); -} - -static int gpio_init(void) +static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) { + struct ich6_bank_platdata *plat = dev_get_platdata(dev); + pci_dev_t pci_dev; /* handle for 0:1f:0 */ u8 tmpbyte; u16 tmpword; u32 tmplong; - - /* Have we already done this? */ - if (found_it_once) - return 0; + u32 gpiobase; + int offset; /* Where should it be? */ - dev = PCI_BDF(0, 0x1f, 0); + pci_dev = PCI_BDF(0, 0x1f, 0); /* Is the device present? */ - pci_read_config_word(dev, PCI_VENDOR_ID, &tmpword); + pci_read_config_word(pci_dev, PCI_VENDOR_ID, &tmpword); if (tmpword != PCI_VENDOR_ID_INTEL) { debug("%s: wrong VendorID\n", __func__); - return -1; + return -ENODEV; } - pci_read_config_word(dev, PCI_DEVICE_ID, &tmpword); + pci_read_config_word(pci_dev, PCI_DEVICE_ID, &tmpword); debug("Found %04x:%04x\n", PCI_VENDOR_ID_INTEL, tmpword); /* * We'd like to validate the Device ID too, but pretty much any @@ -118,37 +76,37 @@ static int gpio_init(void) */ /* I/O should already be enabled (it's a RO bit). */ - pci_read_config_word(dev, PCI_COMMAND, &tmpword); + pci_read_config_word(pci_dev, PCI_COMMAND, &tmpword); if (!(tmpword & PCI_COMMAND_IO)) { debug("%s: device IO not enabled\n", __func__); - return -1; + return -ENODEV; } /* Header Type must be normal (bits 6-0 only; see spec.) */ - pci_read_config_byte(dev, PCI_HEADER_TYPE, &tmpbyte); + pci_read_config_byte(pci_dev, PCI_HEADER_TYPE, &tmpbyte); if ((tmpbyte & 0x7f) != PCI_HEADER_TYPE_NORMAL) { debug("%s: invalid Header type\n", __func__); - return -1; + return -ENODEV; } /* Base Class must be a bridge device */ - pci_read_config_byte(dev, PCI_CLASS_CODE, &tmpbyte); + pci_read_config_byte(pci_dev, PCI_CLASS_CODE, &tmpbyte); if (tmpbyte != PCI_CLASS_CODE_BRIDGE) { debug("%s: invalid class\n", __func__); - return -1; + return -ENODEV; } /* Sub Class must be ISA */ - pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &tmpbyte); + pci_read_config_byte(pci_dev, PCI_CLASS_SUB_CODE, &tmpbyte); if (tmpbyte != PCI_CLASS_SUB_CODE_BRIDGE_ISA) { debug("%s: invalid subclass\n", __func__); - return -1; + return -ENODEV; } /* Programming Interface must be 0x00 (no others exist) */ - pci_read_config_byte(dev, PCI_CLASS_PROG, &tmpbyte); + pci_read_config_byte(pci_dev, PCI_CLASS_PROG, &tmpbyte); if (tmpbyte != 0x00) { debug("%s: invalid interface type\n", __func__); - return -1; + return -ENODEV; } /* @@ -156,11 +114,11 @@ static int gpio_init(void) * that it was unused (or undocumented). Check that it looks * okay: not all ones or zeros, and mapped to I/O space (bit 0). */ - pci_read_config_dword(dev, PCI_CFG_GPIOBASE, &tmplong); + pci_read_config_dword(pci_dev, PCI_CFG_GPIOBASE, &tmplong); if (tmplong == 0x00000000 || tmplong == 0xffffffff || !(tmplong & 0x00000001)) { debug("%s: unexpected GPIOBASE value\n", __func__); - return -1; + return -ENODEV; } /* @@ -170,105 +128,137 @@ static int gpio_init(void) * an I/O address, not a memory address, so mask that off. */ gpiobase = tmplong & 0xfffffffe; + offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1); + if (offset == -1) { + debug("%s: Invalid register offset %d\n", __func__, offset); + return -EINVAL; + } + plat->base_addr = gpiobase + offset; + plat->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset, + "bank-name", NULL); - /* Finally. These are the droids we're looking for. */ - found_it_once = 1; return 0; } -int gpio_request(unsigned num, const char *label /* UNUSED */) +int ich6_gpio_probe(struct udevice *dev) { - u32 tmplong; - int i = 0, j = 0; + struct ich6_bank_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct ich6_bank_priv *bank = dev_get_priv(dev); + + uc_priv->gpio_count = GPIO_PER_BANK; + uc_priv->bank_name = plat->bank_name; + bank->use_sel = plat->base_addr; + bank->io_sel = plat->base_addr + 4; + bank->lvl = plat->base_addr + 8; - /* Is the hardware ready? */ - if (gpio_init()) - return -1; + return 0; +} - if (bad_arg(num, &i, &j)) - return -1; +int ich6_gpio_request(struct udevice *dev, unsigned offset, const char *label) +{ + struct ich6_bank_priv *bank = dev_get_priv(dev); + u32 tmplong; /* * Make sure that the GPIO pin we want isn't already in use for some * built-in hardware function. We have to check this for every * requested pin. */ - tmplong = inl(gpiobase + gpio_bank[i].use_sel); - if (!(tmplong & (1UL << j))) { + tmplong = inl(bank->use_sel); + if (!(tmplong & (1UL << offset))) { debug("%s: gpio %d is reserved for internal use\n", __func__, - num); - return -1; + offset); + return -EPERM; } - return mark_gpio(i, j); -} - -int gpio_free(unsigned num) -{ - int i = 0, j = 0; - - if (notmine(num, &i, &j)) - return -1; - - clear_gpio(i, j); return 0; } -int gpio_direction_input(unsigned num) +static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset) { + struct ich6_bank_priv *bank = dev_get_priv(dev); u32 tmplong; - int i = 0, j = 0; - - if (notmine(num, &i, &j)) - return -1; - tmplong = inl(gpiobase + gpio_bank[i].io_sel); - tmplong |= (1UL << j); - outl(gpiobase + gpio_bank[i].io_sel, tmplong); + tmplong = inl(bank->io_sel); + tmplong |= (1UL << offset); + outl(bank->io_sel, tmplong); return 0; } -int gpio_direction_output(unsigned num, int value) +static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) { + struct ich6_bank_priv *bank = dev_get_priv(dev); u32 tmplong; - int i = 0, j = 0; - if (notmine(num, &i, &j)) - return -1; - - tmplong = inl(gpiobase + gpio_bank[i].io_sel); - tmplong &= ~(1UL << j); - outl(gpiobase + gpio_bank[i].io_sel, tmplong); + tmplong = inl(bank->io_sel); + tmplong &= ~(1UL << offset); + outl(bank->io_sel, tmplong); return 0; } -int gpio_get_value(unsigned num) +static int ich6_gpio_get_value(struct udevice *dev, unsigned offset) + { + struct ich6_bank_priv *bank = dev_get_priv(dev); u32 tmplong; - int i = 0, j = 0; int r; - if (notmine(num, &i, &j)) - return -1; - - tmplong = inl(gpiobase + gpio_bank[i].lvl); - r = (tmplong & (1UL << j)) ? 1 : 0; + tmplong = inl(bank->lvl); + r = (tmplong & (1UL << offset)) ? 1 : 0; return r; } -int gpio_set_value(unsigned num, int value) +static int ich6_gpio_set_value(struct udevice *dev, unsigned offset, + int value) { + struct ich6_bank_priv *bank = dev_get_priv(dev); u32 tmplong; - int i = 0, j = 0; - if (notmine(num, &i, &j)) - return -1; - - tmplong = inl(gpiobase + gpio_bank[i].lvl); + tmplong = inl(bank->lvl); if (value) - tmplong |= (1UL << j); + tmplong |= (1UL << offset); else - tmplong &= ~(1UL << j); - outl(gpiobase + gpio_bank[i].lvl, tmplong); + tmplong &= ~(1UL << offset); + outl(bank->lvl, tmplong); return 0; } + +static int ich6_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct ich6_bank_priv *bank = dev_get_priv(dev); + u32 mask = 1UL << offset; + + if (!(inl(bank->use_sel) & mask)) + return GPIOF_FUNC; + if (inl(bank->io_sel) & mask) + return GPIOF_INPUT; + else + return GPIOF_OUTPUT; +} + +static const struct dm_gpio_ops gpio_ich6_ops = { + .request = ich6_gpio_request, + .direction_input = ich6_gpio_direction_input, + .direction_output = ich6_gpio_direction_output, + .get_value = ich6_gpio_get_value, + .set_value = ich6_gpio_set_value, + .get_function = ich6_gpio_get_function, +}; + +static const struct udevice_id intel_ich6_gpio_ids[] = { + { .compatible = "intel,ich6-gpio" }, + { } +}; + +U_BOOT_DRIVER(gpio_ich6) = { + .name = "gpio_ich6", + .id = UCLASS_GPIO, + .of_match = intel_ich6_gpio_ids, + .ops = &gpio_ich6_ops, + .ofdata_to_platdata = gpio_ich6_ofdata_to_platdata, + .probe = ich6_gpio_probe, + .priv_auto_alloc_size = sizeof(struct ich6_bank_priv), + .platdata_auto_alloc_size = sizeof(struct ich6_bank_platdata), +}; diff --git a/drivers/gpio/kw_gpio.c b/drivers/gpio/kw_gpio.c index 0af75a84ea..43b27e3fea 100644 --- a/drivers/gpio/kw_gpio.c +++ b/drivers/gpio/kw_gpio.c @@ -16,7 +16,7 @@ #include <common.h> #include <asm/bitops.h> #include <asm/io.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <asm/arch/gpio.h> static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)]; @@ -36,7 +36,7 @@ void __set_direction(unsigned pin, int input) u = readl(GPIO_IO_CONF(pin)); } -void __set_level(unsigned pin, int high) +static void __set_level(unsigned pin, int high) { u32 u; @@ -48,7 +48,7 @@ void __set_level(unsigned pin, int high) writel(u, GPIO_OUT(pin)); } -void __set_blinking(unsigned pin, int blink) +static void __set_blinking(unsigned pin, int blink) { u32 u; diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 6a572d5454..8bb9e39b72 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -8,16 +8,29 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <errno.h> +#include <dm.h> +#include <malloc.h> #include <asm/arch/imx-regs.h> #include <asm/gpio.h> #include <asm/io.h> -#include <errno.h> enum mxc_gpio_direction { MXC_GPIO_DIRECTION_IN, MXC_GPIO_DIRECTION_OUT, }; +#define GPIO_PER_BANK 32 + +struct mxc_gpio_plat { + struct gpio_regs *regs; +}; + +struct mxc_bank_info { + struct gpio_regs *regs; +}; + +#ifndef CONFIG_DM_GPIO #define GPIO_TO_PORT(n) (n / 32) /* GPIO port description */ @@ -134,3 +147,176 @@ int gpio_direction_output(unsigned gpio, int value) return mxc_gpio_direction(gpio, MXC_GPIO_DIRECTION_OUT); } +#endif + +#ifdef CONFIG_DM_GPIO +static int mxc_gpio_is_output(struct gpio_regs *regs, int offset) +{ + u32 val; + + val = readl(®s->gpio_dir); + + return val & (1 << offset) ? 1 : 0; +} + +static void mxc_gpio_bank_direction(struct gpio_regs *regs, int offset, + enum mxc_gpio_direction direction) +{ + u32 l; + + l = readl(®s->gpio_dir); + + switch (direction) { + case MXC_GPIO_DIRECTION_OUT: + l |= 1 << offset; + break; + case MXC_GPIO_DIRECTION_IN: + l &= ~(1 << offset); + } + writel(l, ®s->gpio_dir); +} + +static void mxc_gpio_bank_set_value(struct gpio_regs *regs, int offset, + int value) +{ + u32 l; + + l = readl(®s->gpio_dr); + if (value) + l |= 1 << offset; + else + l &= ~(1 << offset); + writel(l, ®s->gpio_dr); +} + +static int mxc_gpio_bank_get_value(struct gpio_regs *regs, int offset) +{ + return (readl(®s->gpio_psr) >> offset) & 0x01; +} + +/* set GPIO pin 'gpio' as an input */ +static int mxc_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + + /* Configure GPIO direction as input. */ + mxc_gpio_bank_direction(bank->regs, offset, MXC_GPIO_DIRECTION_IN); + + return 0; +} + +/* set GPIO pin 'gpio' as an output, with polarity 'value' */ +static int mxc_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + + /* Configure GPIO output value. */ + mxc_gpio_bank_set_value(bank->regs, offset, value); + + /* Configure GPIO direction as output. */ + mxc_gpio_bank_direction(bank->regs, offset, MXC_GPIO_DIRECTION_OUT); + + return 0; +} + +/* read GPIO IN value of pin 'gpio' */ +static int mxc_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + + return mxc_gpio_bank_get_value(bank->regs, offset); +} + +/* write GPIO OUT value to pin 'gpio' */ +static int mxc_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + + mxc_gpio_bank_set_value(bank->regs, offset, value); + + return 0; +} + +static int mxc_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + + /* GPIOF_FUNC is not implemented yet */ + if (mxc_gpio_is_output(bank->regs, offset)) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static const struct dm_gpio_ops gpio_mxc_ops = { + .direction_input = mxc_gpio_direction_input, + .direction_output = mxc_gpio_direction_output, + .get_value = mxc_gpio_get_value, + .set_value = mxc_gpio_set_value, + .get_function = mxc_gpio_get_function, +}; + +static const struct mxc_gpio_plat mxc_plat[] = { + { (struct gpio_regs *)GPIO1_BASE_ADDR }, + { (struct gpio_regs *)GPIO2_BASE_ADDR }, + { (struct gpio_regs *)GPIO3_BASE_ADDR }, +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ + defined(CONFIG_MX53) || defined(CONFIG_MX6) + { (struct gpio_regs *)GPIO4_BASE_ADDR }, +#endif +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) + { (struct gpio_regs *)GPIO5_BASE_ADDR }, + { (struct gpio_regs *)GPIO6_BASE_ADDR }, +#endif +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) + { (struct gpio_regs *)GPIO7_BASE_ADDR }, +#endif +}; + +static int mxc_gpio_probe(struct udevice *dev) +{ + struct mxc_bank_info *bank = dev_get_priv(dev); + struct mxc_gpio_plat *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + int banknum; + char name[18], *str; + + banknum = plat - mxc_plat; + sprintf(name, "GPIO%d_", banknum + 1); + str = strdup(name); + if (!str) + return -ENOMEM; + uc_priv->bank_name = str; + uc_priv->gpio_count = GPIO_PER_BANK; + bank->regs = plat->regs; + + return 0; +} + +U_BOOT_DRIVER(gpio_mxc) = { + .name = "gpio_mxc", + .id = UCLASS_GPIO, + .ops = &gpio_mxc_ops, + .probe = mxc_gpio_probe, + .priv_auto_alloc_size = sizeof(struct mxc_bank_info), +}; + +U_BOOT_DEVICES(mxc_gpios) = { + { "gpio_mxc", &mxc_plat[0] }, + { "gpio_mxc", &mxc_plat[1] }, + { "gpio_mxc", &mxc_plat[2] }, +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ + defined(CONFIG_MX53) || defined(CONFIG_MX6) + { "gpio_mxc", &mxc_plat[3] }, +#endif +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) + { "gpio_mxc", &mxc_plat[4] }, + { "gpio_mxc", &mxc_plat[5] }, +#endif +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) + { "gpio_mxc", &mxc_plat[6] }, +#endif +}; +#endif diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index 13dcf79873..f3a7ccb51e 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -19,6 +19,7 @@ * Written by Juha Yrjölä <juha.yrjola@nokia.com> */ #include <common.h> +#include <dm.h> #include <asm/gpio.h> #include <asm/io.h> #include <asm/errno.h> @@ -26,10 +27,17 @@ #define OMAP_GPIO_DIR_OUT 0 #define OMAP_GPIO_DIR_IN 1 -static inline const struct gpio_bank *get_gpio_bank(int gpio) -{ - return &omap_gpio_bank[gpio >> 5]; -} +#ifdef CONFIG_DM_GPIO + +#define GPIO_PER_BANK 32 + +struct gpio_bank { + /* TODO(sjg@chromium.org): Can we use a struct here? */ + void *base; /* address of registers in physical memory */ + enum gpio_method method; +}; + +#endif static inline int get_gpio_index(int gpio) { @@ -41,15 +49,6 @@ int gpio_is_valid(int gpio) return (gpio >= 0) && (gpio < OMAP_MAX_GPIO); } -static int check_gpio(int gpio) -{ - if (!gpio_is_valid(gpio)) { - printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); - return -1; - } - return 0; -} - static void _set_gpio_direction(const struct gpio_bank *bank, int gpio, int is_input) { @@ -118,6 +117,48 @@ static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio, __raw_writel(l, reg); } +static int _get_gpio_value(const struct gpio_bank *bank, int gpio) +{ + void *reg = bank->base; + int input; + + switch (bank->method) { + case METHOD_GPIO_24XX: + input = _get_gpio_direction(bank, gpio); + switch (input) { + case OMAP_GPIO_DIR_IN: + reg += OMAP_GPIO_DATAIN; + break; + case OMAP_GPIO_DIR_OUT: + reg += OMAP_GPIO_DATAOUT; + break; + default: + return -1; + } + break; + default: + return -1; + } + + return (__raw_readl(reg) & (1 << gpio)) != 0; +} + +#ifndef CONFIG_DM_GPIO + +static inline const struct gpio_bank *get_gpio_bank(int gpio) +{ + return &omap_gpio_bank[gpio >> 5]; +} + +static int check_gpio(int gpio) +{ + if (!gpio_is_valid(gpio)) { + printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); + return -1; + } + return 0; +} + /** * Set value of the specified gpio */ @@ -139,32 +180,12 @@ int gpio_set_value(unsigned gpio, int value) int gpio_get_value(unsigned gpio) { const struct gpio_bank *bank; - void *reg; - int input; if (check_gpio(gpio) < 0) return -1; bank = get_gpio_bank(gpio); - reg = bank->base; - switch (bank->method) { - case METHOD_GPIO_24XX: - input = _get_gpio_direction(bank, get_gpio_index(gpio)); - switch (input) { - case OMAP_GPIO_DIR_IN: - reg += OMAP_GPIO_DATAIN; - break; - case OMAP_GPIO_DIR_OUT: - reg += OMAP_GPIO_DATAOUT; - break; - default: - return -1; - } - break; - default: - return -1; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; + + return _get_gpio_value(bank, get_gpio_index(gpio)); } /** @@ -220,3 +241,95 @@ int gpio_free(unsigned gpio) { return 0; } + +#else /* new driver model interface CONFIG_DM_GPIO */ + +/* set GPIO pin 'gpio' as an input */ +static int omap_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct gpio_bank *bank = dev_get_priv(dev); + + /* Configure GPIO direction as input. */ + _set_gpio_direction(bank, offset, 1); + + return 0; +} + +/* set GPIO pin 'gpio' as an output, with polarity 'value' */ +static int omap_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct gpio_bank *bank = dev_get_priv(dev); + + _set_gpio_dataout(bank, offset, value); + _set_gpio_direction(bank, offset, 0); + + return 0; +} + +/* read GPIO IN value of pin 'gpio' */ +static int omap_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct gpio_bank *bank = dev_get_priv(dev); + + return _get_gpio_value(bank, offset); +} + +/* write GPIO OUT value to pin 'gpio' */ +static int omap_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct gpio_bank *bank = dev_get_priv(dev); + + _set_gpio_dataout(bank, offset, value); + + return 0; +} + +static int omap_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct gpio_bank *bank = dev_get_priv(dev); + + /* GPIOF_FUNC is not implemented yet */ + if (_get_gpio_direction(bank->base, offset) == OMAP_GPIO_DIR_OUT) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static const struct dm_gpio_ops gpio_omap_ops = { + .direction_input = omap_gpio_direction_input, + .direction_output = omap_gpio_direction_output, + .get_value = omap_gpio_get_value, + .set_value = omap_gpio_set_value, + .get_function = omap_gpio_get_function, +}; + +static int omap_gpio_probe(struct udevice *dev) +{ + struct gpio_bank *bank = dev_get_priv(dev); + struct omap_gpio_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + char name[18], *str; + + sprintf(name, "GPIO%d_", plat->bank_index); + str = strdup(name); + if (!str) + return -ENOMEM; + uc_priv->bank_name = str; + uc_priv->gpio_count = GPIO_PER_BANK; + bank->base = (void *)plat->base; + bank->method = plat->method; + + return 0; +} + +U_BOOT_DRIVER(gpio_omap) = { + .name = "gpio_omap", + .id = UCLASS_GPIO, + .ops = &gpio_omap_ops, + .probe = omap_gpio_probe, + .priv_auto_alloc_size = sizeof(struct gpio_bank), +}; + +#endif /* CONFIG_DM_GPIO */ diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index db7b673731..6c41a42c17 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -6,120 +6,69 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> #include <asm/io.h> #include <asm/gpio.h> -#include <asm/arch/gpio.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; #define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK) -#define CON_MASK(x) (0xf << ((x) << 2)) -#define CON_SFR(x, v) ((v) << ((x) << 2)) +#define CON_MASK(val) (0xf << ((val) << 2)) +#define CON_SFR(gpio, cfg) ((cfg) << ((gpio) << 2)) +#define CON_SFR_UNSHIFT(val, gpio) ((val) >> ((gpio) << 2)) + +#define DAT_MASK(gpio) (0x1 << (gpio)) +#define DAT_SET(gpio) (0x1 << (gpio)) -#define DAT_MASK(x) (0x1 << (x)) -#define DAT_SET(x) (0x1 << (x)) +#define PULL_MASK(gpio) (0x3 << ((gpio) << 1)) +#define PULL_MODE(gpio, pull) ((pull) << ((gpio) << 1)) -#define PULL_MASK(x) (0x3 << ((x) << 1)) -#define PULL_MODE(x, v) ((v) << ((x) << 1)) +#define DRV_MASK(gpio) (0x3 << ((gpio) << 1)) +#define DRV_SET(gpio, mode) ((mode) << ((gpio) << 1)) +#define RATE_MASK(gpio) (0x1 << (gpio + 16)) +#define RATE_SET(gpio) (0x1 << (gpio + 16)) -#define DRV_MASK(x) (0x3 << ((x) << 1)) -#define DRV_SET(x, m) ((m) << ((x) << 1)) -#define RATE_MASK(x) (0x1 << (x + 16)) -#define RATE_SET(x) (0x1 << (x + 16)) +/* Platform data for each bank */ +struct exynos_gpio_platdata { + struct s5p_gpio_bank *bank; + const char *bank_name; /* Name of port, e.g. 'gpa0" */ +}; -#define name_to_gpio(n) s5p_name_to_gpio(n) -static inline int s5p_name_to_gpio(const char *name) +/* Information about each bank at run-time */ +struct exynos_bank_info { + struct s5p_gpio_bank *bank; +}; + +static struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio) { - unsigned num, irregular_set_number, irregular_bank_base; - const struct gpio_name_num_table *tabp; - char this_bank, bank_name, irregular_bank_name; - char *endp; - - /* - * The gpio name starts with either 'g' or 'gp' followed by the bank - * name character. Skip one or two characters depending on the prefix. - */ - if (name[0] == 'g' && name[1] == 'p') - name += 2; - else if (name[0] == 'g') - name++; - else - return -1; /* Name must start with 'g' */ - - bank_name = *name++; - if (!*name) - return -1; /* At least one digit is required/expected. */ - - /* - * On both exynos5 and exynos5420 architectures there is a bank of - * GPIOs which does not fall into the regular address pattern. Those - * banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below - * assignments help to handle these irregularities. - */ -#if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) - if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) { - tabp = exynos5420_gpio_table; - irregular_bank_name = 'y'; - irregular_set_number = '7'; - irregular_bank_base = EXYNOS5420_GPIO_Y70; - } else { - tabp = exynos5_gpio_table; - irregular_bank_name = 'c'; - irregular_set_number = '4'; - irregular_bank_base = EXYNOS5_GPIO_C40; - } - } else { - if (proid_is_exynos4412()) - tabp = exynos4x12_gpio_table; - else - tabp = exynos4_gpio_table; - irregular_bank_name = 0; - irregular_set_number = 0; - irregular_bank_base = 0; - } -#else - if (cpu_is_s5pc110()) - tabp = s5pc110_gpio_table; - else - tabp = s5pc100_gpio_table; - irregular_bank_name = 0; - irregular_set_number = 0; - irregular_bank_base = 0; -#endif + const struct gpio_info *data; + unsigned int upto; + int i, count; + + data = get_gpio_data(); + count = get_bank_num(); + upto = 0; - this_bank = tabp->bank; - do { - if (bank_name == this_bank) { - unsigned pin_index; /* pin number within the bank */ - if ((bank_name == irregular_bank_name) && - (name[0] == irregular_set_number)) { - pin_index = name[1] - '0'; - /* Irregular sets have 8 pins. */ - if (pin_index >= GPIO_PER_BANK) - return -1; - num = irregular_bank_base + pin_index; - } else { - pin_index = simple_strtoul(name, &endp, 8); - pin_index -= tabp->bank_offset; - /* - * Sanity check: bunk 'z' has no set number, - * for all other banks there must be exactly - * two octal digits, and the resulting number - * should not exceed the number of pins in the - * bank. - */ - if (((bank_name != 'z') && !name[1]) || - *endp || - (pin_index >= tabp->bank_size)) - return -1; - num = tabp->base + pin_index; - } - return num; + for (i = 0; i < count; i++) { + debug("i=%d, upto=%d\n", i, upto); + if (gpio < data->max_gpio) { + struct s5p_gpio_bank *bank; + bank = (struct s5p_gpio_bank *)data->reg_addr; + bank += (gpio - upto) / GPIO_PER_BANK; + debug("gpio=%d, bank=%p\n", gpio, bank); + return bank; } - this_bank = (++tabp)->bank; - } while (this_bank); - return -1; + upto = data->max_gpio; + data++; + } + + return NULL; } static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) @@ -143,16 +92,23 @@ static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); } -static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, - int gpio, int en) +#ifdef CONFIG_SPL_BUILD +/* Common GPIO API - SPL does not support driver model yet */ +int gpio_set_value(unsigned gpio, int value) { - s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT); - s5p_gpio_set_value(bank, gpio, en); -} + s5p_gpio_set_value(s5p_gpio_get_bank(gpio), + s5p_gpio_get_pin(gpio), value); -static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) + return 0; +} +#else +static int s5p_gpio_get_cfg_pin(struct s5p_gpio_bank *bank, int gpio) { - s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT); + unsigned int value; + + value = readl(&bank->con); + value &= CON_MASK(gpio); + return CON_SFR_UNSHIFT(value, gpio); } static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) @@ -162,6 +118,7 @@ static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) value = readl(&bank->dat); return !!(value & DAT_MASK(gpio)); } +#endif /* CONFIG_SPL_BUILD */ static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { @@ -222,78 +179,63 @@ static void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) writel(value, &bank->drv); } -struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio) -{ - const struct gpio_info *data; - unsigned int upto; - int i, count; - - data = get_gpio_data(); - count = get_bank_num(); - upto = 0; - - for (i = 0; i < count; i++) { - debug("i=%d, upto=%d\n", i, upto); - if (gpio < data->max_gpio) { - struct s5p_gpio_bank *bank; - bank = (struct s5p_gpio_bank *)data->reg_addr; - bank += (gpio - upto) / GPIO_PER_BANK; - debug("gpio=%d, bank=%p\n", gpio, bank); - return bank; - } - - upto = data->max_gpio; - data++; - } - - return NULL; -} - int s5p_gpio_get_pin(unsigned gpio) { return S5P_GPIO_GET_PIN(gpio); } -/* Common GPIO API */ - -int gpio_request(unsigned gpio, const char *label) +/* Driver model interface */ +#ifndef CONFIG_SPL_BUILD +/* set GPIO pin 'gpio' as an input */ +static int exynos_gpio_direction_input(struct udevice *dev, unsigned offset) { - return 0; -} + struct exynos_bank_info *state = dev_get_priv(dev); -int gpio_free(unsigned gpio) -{ - return 0; -} + /* Configure GPIO direction as input. */ + s5p_gpio_cfg_pin(state->bank, offset, S5P_GPIO_INPUT); -int gpio_direction_input(unsigned gpio) -{ - s5p_gpio_direction_input(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio)); return 0; } -int gpio_direction_output(unsigned gpio, int value) +/* set GPIO pin 'gpio' as an output, with polarity 'value' */ +static int exynos_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) { - s5p_gpio_direction_output(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio), value); + struct exynos_bank_info *state = dev_get_priv(dev); + + /* Configure GPIO output value. */ + s5p_gpio_set_value(state->bank, offset, value); + + /* Configure GPIO direction as output. */ + s5p_gpio_cfg_pin(state->bank, offset, S5P_GPIO_OUTPUT); + return 0; } -int gpio_get_value(unsigned gpio) +/* read GPIO IN value of pin 'gpio' */ +static int exynos_gpio_get_value(struct udevice *dev, unsigned offset) { - return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio)); + struct exynos_bank_info *state = dev_get_priv(dev); + + return s5p_gpio_get_value(state->bank, offset); } -int gpio_set_value(unsigned gpio, int value) +/* write GPIO OUT value to pin 'gpio' */ +static int exynos_gpio_set_value(struct udevice *dev, unsigned offset, + int value) { - s5p_gpio_set_value(s5p_gpio_get_bank(gpio), - s5p_gpio_get_pin(gpio), value); + struct exynos_bank_info *state = dev_get_priv(dev); + + s5p_gpio_set_value(state->bank, offset, value); return 0; } +#endif /* nCONFIG_SPL_BUILD */ +/* + * There is no common GPIO API for pull, drv, pin, rate (yet). These + * functions are kept here to preserve function ordering for review. + */ void gpio_set_pull(int gpio, int mode) { s5p_gpio_set_pull(s5p_gpio_get_bank(gpio), @@ -317,3 +259,112 @@ void gpio_set_rate(int gpio, int mode) s5p_gpio_set_rate(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), mode); } + +#ifndef CONFIG_SPL_BUILD +static int exynos_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct exynos_bank_info *state = dev_get_priv(dev); + int cfg; + + cfg = s5p_gpio_get_cfg_pin(state->bank, offset); + if (cfg == S5P_GPIO_OUTPUT) + return GPIOF_OUTPUT; + else if (cfg == S5P_GPIO_INPUT) + return GPIOF_INPUT; + else + return GPIOF_FUNC; +} + +static const struct dm_gpio_ops gpio_exynos_ops = { + .direction_input = exynos_gpio_direction_input, + .direction_output = exynos_gpio_direction_output, + .get_value = exynos_gpio_get_value, + .set_value = exynos_gpio_set_value, + .get_function = exynos_gpio_get_function, +}; + +static int gpio_exynos_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct exynos_bank_info *priv = dev->priv; + struct exynos_gpio_platdata *plat = dev->platdata; + + /* Only child devices have ports */ + if (!plat) + return 0; + + priv->bank = plat->bank; + + uc_priv->gpio_count = GPIO_PER_BANK; + uc_priv->bank_name = plat->bank_name; + + return 0; +} + +/** + * We have a top-level GPIO device with no actual GPIOs. It has a child + * device for each Exynos GPIO bank. + */ +static int gpio_exynos_bind(struct udevice *parent) +{ + struct exynos_gpio_platdata *plat = parent->platdata; + struct s5p_gpio_bank *bank, *base; + const void *blob = gd->fdt_blob; + int node; + + /* If this is a child device, there is nothing to do here */ + if (plat) + return 0; + + base = (struct s5p_gpio_bank *)fdtdec_get_addr(gd->fdt_blob, + parent->of_offset, "reg"); + for (node = fdt_first_subnode(blob, parent->of_offset), bank = base; + node > 0; + node = fdt_next_subnode(blob, node), bank++) { + struct exynos_gpio_platdata *plat; + struct udevice *dev; + fdt_addr_t reg; + int ret; + + if (!fdtdec_get_bool(blob, node, "gpio-controller")) + continue; + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + reg = fdtdec_get_addr(blob, node, "reg"); + if (reg != FDT_ADDR_T_NONE) + bank = (struct s5p_gpio_bank *)((ulong)base + reg); + plat->bank = bank; + plat->bank_name = fdt_get_name(blob, node, NULL); + debug("dev at %p: %s\n", bank, plat->bank_name); + + ret = device_bind(parent, parent->driver, + plat->bank_name, plat, -1, &dev); + if (ret) + return ret; + dev->of_offset = parent->of_offset; + } + + return 0; +} + +static const struct udevice_id exynos_gpio_ids[] = { + { .compatible = "samsung,s5pc100-pinctrl" }, + { .compatible = "samsung,s5pc110-pinctrl" }, + { .compatible = "samsung,exynos4210-pinctrl" }, + { .compatible = "samsung,exynos4x12-pinctrl" }, + { .compatible = "samsung,exynos5250-pinctrl" }, + { .compatible = "samsung,exynos5420-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(gpio_exynos) = { + .name = "gpio_exynos", + .id = UCLASS_GPIO, + .of_match = exynos_gpio_ids, + .bind = gpio_exynos_bind, + .probe = gpio_exynos_probe, + .priv_auto_alloc_size = sizeof(struct exynos_bank_info), + .ops = &gpio_exynos_ops, +}; +#endif diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c index 75ada5d387..53c80d5be6 100644 --- a/drivers/gpio/sandbox.c +++ b/drivers/gpio/sandbox.c @@ -14,7 +14,6 @@ DECLARE_GLOBAL_DATA_PTR; /* Flags for each GPIO */ #define GPIOF_OUTPUT (1 << 0) /* Currently set as an output */ #define GPIOF_HIGH (1 << 1) /* Currently set high */ -#define GPIOF_RESERVED (1 << 2) /* Is in use / requested */ struct gpio_state { const char *label; /* label given by requester */ @@ -54,18 +53,6 @@ static int set_gpio_flag(struct udevice *dev, unsigned offset, int flag, return 0; } -static int check_reserved(struct udevice *dev, unsigned offset, - const char *func) -{ - if (!get_gpio_flag(dev, offset, GPIOF_RESERVED)) { - printf("sandbox_gpio: %s: error: offset %u not reserved\n", - func, offset); - return -1; - } - - return 0; -} - /* * Back-channel sandbox-internal-only access to GPIO state */ @@ -101,9 +88,6 @@ static int sb_gpio_direction_input(struct udevice *dev, unsigned offset) { debug("%s: offset:%u\n", __func__, offset); - if (check_reserved(dev, offset, __func__)) - return -1; - return sandbox_gpio_set_direction(dev, offset, 0); } @@ -113,9 +97,6 @@ static int sb_gpio_direction_output(struct udevice *dev, unsigned offset, { debug("%s: offset:%u, value = %d\n", __func__, offset, value); - if (check_reserved(dev, offset, __func__)) - return -1; - return sandbox_gpio_set_direction(dev, offset, 1) | sandbox_gpio_set_value(dev, offset, value); } @@ -125,9 +106,6 @@ static int sb_gpio_get_value(struct udevice *dev, unsigned offset) { debug("%s: offset:%u\n", __func__, offset); - if (check_reserved(dev, offset, __func__)) - return -1; - return sandbox_gpio_get_value(dev, offset); } @@ -136,9 +114,6 @@ static int sb_gpio_set_value(struct udevice *dev, unsigned offset, int value) { debug("%s: offset:%u, value = %d\n", __func__, offset, value); - if (check_reserved(dev, offset, __func__)) - return -1; - if (!sandbox_gpio_get_direction(dev, offset)) { printf("sandbox_gpio: error: set_value on input gpio %u\n", offset); @@ -148,69 +123,19 @@ static int sb_gpio_set_value(struct udevice *dev, unsigned offset, int value) return sandbox_gpio_set_value(dev, offset, value); } -static int sb_gpio_request(struct udevice *dev, unsigned offset, - const char *label) +static int sb_gpio_get_function(struct udevice *dev, unsigned offset) { - struct gpio_dev_priv *uc_priv = dev->uclass_priv; - struct gpio_state *state = dev_get_priv(dev); - - debug("%s: offset:%u, label:%s\n", __func__, offset, label); - - if (offset >= uc_priv->gpio_count) { - printf("sandbox_gpio: error: invalid gpio %u\n", offset); - return -1; - } - - if (get_gpio_flag(dev, offset, GPIOF_RESERVED)) { - printf("sandbox_gpio: error: gpio %u already reserved\n", - offset); - return -1; - } - - state[offset].label = label; - return set_gpio_flag(dev, offset, GPIOF_RESERVED, 1); -} - -static int sb_gpio_free(struct udevice *dev, unsigned offset) -{ - struct gpio_state *state = dev_get_priv(dev); - - debug("%s: offset:%u\n", __func__, offset); - - if (check_reserved(dev, offset, __func__)) - return -1; - - state[offset].label = NULL; - return set_gpio_flag(dev, offset, GPIOF_RESERVED, 0); -} - -static int sb_gpio_get_state(struct udevice *dev, unsigned int offset, - char *buf, int bufsize) -{ - struct gpio_dev_priv *uc_priv = dev->uclass_priv; - struct gpio_state *state = dev_get_priv(dev); - const char *label; - - label = state[offset].label; - snprintf(buf, bufsize, "%s%d: %s: %d [%c]%s%s", - uc_priv->bank_name ? uc_priv->bank_name : "", offset, - sandbox_gpio_get_direction(dev, offset) ? "out" : " in", - sandbox_gpio_get_value(dev, offset), - get_gpio_flag(dev, offset, GPIOF_RESERVED) ? 'x' : ' ', - label ? " " : "", - label ? label : ""); - - return 0; + if (get_gpio_flag(dev, offset, GPIOF_OUTPUT)) + return GPIOF_OUTPUT; + return GPIOF_INPUT; } static const struct dm_gpio_ops gpio_sandbox_ops = { - .request = sb_gpio_request, - .free = sb_gpio_free, .direction_input = sb_gpio_direction_input, .direction_output = sb_gpio_direction_output, .get_value = sb_gpio_get_value, .set_value = sb_gpio_set_value, - .get_state = sb_gpio_get_state, + .get_function = sb_gpio_get_function, }; static int sandbox_gpio_ofdata_to_platdata(struct udevice *dev) @@ -239,6 +164,13 @@ static int gpio_sandbox_probe(struct udevice *dev) return 0; } +static int gpio_sandbox_remove(struct udevice *dev) +{ + free(dev->priv); + + return 0; +} + static const struct udevice_id sandbox_gpio_ids[] = { { .compatible = "sandbox,gpio" }, { } @@ -250,5 +182,6 @@ U_BOOT_DRIVER(gpio_sandbox) = { .of_match = sandbox_gpio_ids, .ofdata_to_platdata = sandbox_gpio_ofdata_to_platdata, .probe = gpio_sandbox_probe, + .remove = gpio_sandbox_remove, .ops = &gpio_sandbox_ops, }; diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 1cc4abb8a9..88f7ef5bf0 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -39,7 +39,6 @@ struct tegra_gpio_platdata { /* Information about each port at run-time */ struct tegra_port_info { - char label[TEGRA_GPIOS_PER_PORT][GPIO_NAME_SIZE]; struct gpio_ctlr_bank *bank; int base_gpio; /* Port number for this port (0, 1,.., n-1) */ }; @@ -132,21 +131,6 @@ static void set_level(unsigned gpio, int high) writel(u, &bank->gpio_out[GPIO_PORT(gpio)]); } -static int check_reserved(struct udevice *dev, unsigned offset, - const char *func) -{ - struct tegra_port_info *state = dev_get_priv(dev); - struct gpio_dev_priv *uc_priv = dev->uclass_priv; - - if (!*state->label[offset]) { - printf("tegra_gpio: %s: error: gpio %s%d not reserved\n", - func, uc_priv->bank_name, offset); - return -EBUSY; - } - - return 0; -} - /* set GPIO pin 'gpio' as an output, with polarity 'value' */ int tegra_spl_gpio_direction_output(int gpio, int value) { @@ -171,56 +155,16 @@ static int tegra_gpio_request(struct udevice *dev, unsigned offset, { struct tegra_port_info *state = dev_get_priv(dev); - if (*state->label[offset]) - return -EBUSY; - - strncpy(state->label[offset], label, GPIO_NAME_SIZE); - state->label[offset][GPIO_NAME_SIZE - 1] = '\0'; - /* Configure as a GPIO */ set_config(state->base_gpio + offset, 1); return 0; } -static int tegra_gpio_free(struct udevice *dev, unsigned offset) -{ - struct tegra_port_info *state = dev_get_priv(dev); - int ret; - - ret = check_reserved(dev, offset, __func__); - if (ret) - return ret; - state->label[offset][0] = '\0'; - - return 0; -} - -/* read GPIO OUT value of pin 'gpio' */ -static int tegra_gpio_get_output_value(unsigned gpio) -{ - struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; - struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)]; - int val; - - debug("gpio_get_output_value: pin = %d (port %d:bit %d)\n", - gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio)); - - val = readl(&bank->gpio_out[GPIO_PORT(gpio)]); - - return (val >> GPIO_BIT(gpio)) & 1; -} - - /* set GPIO pin 'gpio' as an input */ static int tegra_gpio_direction_input(struct udevice *dev, unsigned offset) { struct tegra_port_info *state = dev_get_priv(dev); - int ret; - - ret = check_reserved(dev, offset, __func__); - if (ret) - return ret; /* Configure GPIO direction as input. */ set_direction(state->base_gpio + offset, 0); @@ -234,11 +178,6 @@ static int tegra_gpio_direction_output(struct udevice *dev, unsigned offset, { struct tegra_port_info *state = dev_get_priv(dev); int gpio = state->base_gpio + offset; - int ret; - - ret = check_reserved(dev, offset, __func__); - if (ret) - return ret; /* Configure GPIO output value. */ set_level(gpio, value); @@ -254,13 +193,8 @@ static int tegra_gpio_get_value(struct udevice *dev, unsigned offset) { struct tegra_port_info *state = dev_get_priv(dev); int gpio = state->base_gpio + offset; - int ret; int val; - ret = check_reserved(dev, offset, __func__); - if (ret) - return ret; - debug("%s: pin = %d (port %d:bit %d)\n", __func__, gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio)); @@ -274,11 +208,6 @@ static int tegra_gpio_set_value(struct udevice *dev, unsigned offset, int value) { struct tegra_port_info *state = dev_get_priv(dev); int gpio = state->base_gpio + offset; - int ret; - - ret = check_reserved(dev, offset, __func__); - if (ret) - return ret; debug("gpio_set_value: pin = %d (port %d:bit %d), value = %d\n", gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value); @@ -314,8 +243,6 @@ static int tegra_gpio_get_function(struct udevice *dev, unsigned offset) struct tegra_port_info *state = dev_get_priv(dev); int gpio = state->base_gpio + offset; - if (!*state->label[offset]) - return GPIOF_UNUSED; if (!get_config(gpio)) return GPIOF_FUNC; else if (get_direction(gpio)) @@ -324,50 +251,13 @@ static int tegra_gpio_get_function(struct udevice *dev, unsigned offset) return GPIOF_INPUT; } -static int tegra_gpio_get_state(struct udevice *dev, unsigned int offset, - char *buf, int bufsize) -{ - struct gpio_dev_priv *uc_priv = dev->uclass_priv; - struct tegra_port_info *state = dev_get_priv(dev); - int gpio = state->base_gpio + offset; - const char *label; - int is_output; - int is_gpio; - int size; - - label = state->label[offset]; - is_gpio = get_config(gpio); /* GPIO, not SFPIO */ - size = snprintf(buf, bufsize, "%s%d: ", - uc_priv->bank_name ? uc_priv->bank_name : "", offset); - buf += size; - bufsize -= size; - if (is_gpio) { - is_output = get_direction(gpio); - - snprintf(buf, bufsize, "%s: %d [%c]%s%s", - is_output ? "out" : " in", - is_output ? - tegra_gpio_get_output_value(gpio) : - tegra_gpio_get_value(dev, offset), - *label ? 'x' : ' ', - *label ? " " : "", - label); - } else { - snprintf(buf, bufsize, "sfpio"); - } - - return 0; -} - static const struct dm_gpio_ops gpio_tegra_ops = { .request = tegra_gpio_request, - .free = tegra_gpio_free, .direction_input = tegra_gpio_direction_input, .direction_output = tegra_gpio_direction_output, .get_value = tegra_gpio_get_value, .set_value = tegra_gpio_set_value, .get_function = tegra_gpio_get_function, - .get_state = tegra_gpio_get_state, }; /** diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index c891ebd39e..e085a7095e 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -8,6 +8,7 @@ #include <common.h> #include <asm/io.h> #include "designware_i2c.h" +#include <i2c.h> #ifdef CONFIG_I2C_MULTI_BUS static unsigned int bus_initialized[CONFIG_SYS_I2C_BUS_MAX]; @@ -76,16 +77,20 @@ static void set_speed(int i2c_spd) * * Set the i2c speed. */ -int i2c_set_bus_speed(int speed) +int i2c_set_bus_speed(unsigned int speed) { + int i2c_spd; + if (speed >= I2C_MAX_SPEED) - set_speed(IC_SPEED_MODE_MAX); + i2c_spd = IC_SPEED_MODE_MAX; else if (speed >= I2C_FAST_SPEED) - set_speed(IC_SPEED_MODE_FAST); + i2c_spd = IC_SPEED_MODE_FAST; else - set_speed(IC_SPEED_MODE_STANDARD); + i2c_spd = IC_SPEED_MODE_STANDARD; - return 0; + set_speed(i2c_spd); + + return i2c_spd; } /* @@ -93,7 +98,7 @@ int i2c_set_bus_speed(int speed) * * Gets the i2c speed. */ -int i2c_get_bus_speed(void) +unsigned int i2c_get_bus_speed(void) { u32 cntl; @@ -429,7 +434,7 @@ int i2c_set_bus_num(unsigned int bus) return 0; } -int i2c_get_bus_num(void) +unsigned int i2c_get_bus_num(void) { return current_bus; } diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index ab3ffa0fc1..9b2ca1e81b 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -20,8 +20,8 @@ #if defined(CONFIG_ORION5X) #include <asm/arch/orion5x.h> -#elif defined(CONFIG_KIRKWOOD) -#include <asm/arch/kirkwood.h> +#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARMADA_XP)) +#include <asm/arch/soc.h> #elif defined(CONFIG_SUNXI) #include <asm/arch/i2c.h> #else diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 257b72f0f7..562211e7de 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -471,8 +471,8 @@ static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) } /* i2c write version without the register address */ -int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len, - bool end_with_repeated_start) +static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, + int len, bool end_with_repeated_start) { int rc; @@ -493,7 +493,8 @@ int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len, } /* i2c read version without the register address */ -int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len) +static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, + int len) { int rc; diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c index 7e36db0a71..0ef94f7a00 100644 --- a/drivers/input/tegra-kbc.c +++ b/drivers/input/tegra-kbc.c @@ -181,7 +181,7 @@ static void kbd_wait_for_fifo_init(struct keyb *config) * @param input Input configuration * @return 1, to indicate that we have something to look at */ -int tegra_kbc_check(struct input_config *input) +static int tegra_kbc_check(struct input_config *input) { kbd_wait_for_fifo_init(&config); check_for_keys(&config); diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c index 068373b942..521edfd5de 100644 --- a/drivers/misc/cros_ec.c +++ b/drivers/misc/cros_ec.c @@ -16,6 +16,7 @@ #include <common.h> #include <command.h> +#include <dm.h> #include <i2c.h> #include <cros_ec.h> #include <fdtdec.h> @@ -24,6 +25,8 @@ #include <asm/errno.h> #include <asm/io.h> #include <asm-generic/gpio.h> +#include <dm/device-internal.h> +#include <dm/uclass-internal.h> #ifdef DEBUG_TRACE #define debug_trace(fmt, b...) debug(fmt, #b) @@ -38,7 +41,9 @@ enum { CROS_EC_CMD_HASH_TIMEOUT_MS = 2000, }; +#ifndef CONFIG_DM_CROS_EC static struct cros_ec_dev static_dev, *last_dev; +#endif DECLARE_GLOBAL_DATA_PTR; @@ -204,6 +209,9 @@ static int send_command_proto3(struct cros_ec_dev *dev, const void *dout, int dout_len, uint8_t **dinp, int din_len) { +#ifdef CONFIG_DM_CROS_EC + struct dm_cros_ec_ops *ops; +#endif int out_bytes, in_bytes; int rv; @@ -218,6 +226,10 @@ static int send_command_proto3(struct cros_ec_dev *dev, if (in_bytes < 0) return in_bytes; +#ifdef CONFIG_DM_CROS_EC + ops = dm_cros_ec_get_ops(dev->dev); + rv = ops->packet(dev->dev, out_bytes, in_bytes); +#else switch (dev->interface) { #ifdef CONFIG_CROS_EC_SPI case CROS_EC_IF_SPI: @@ -235,6 +247,7 @@ static int send_command_proto3(struct cros_ec_dev *dev, debug("%s: Unsupported interface\n", __func__); rv = -1; } +#endif if (rv < 0) return rv; @@ -246,6 +259,9 @@ static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, const void *dout, int dout_len, uint8_t **dinp, int din_len) { +#ifdef CONFIG_DM_CROS_EC + struct dm_cros_ec_ops *ops; +#endif int ret = -1; /* Handle protocol version 3 support */ @@ -254,6 +270,11 @@ static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, dout, dout_len, dinp, din_len); } +#ifdef CONFIG_DM_CROS_EC + ops = dm_cros_ec_get_ops(dev->dev); + ret = ops->command(dev->dev, cmd, cmd_version, + (const uint8_t *)dout, dout_len, dinp, din_len); +#else switch (dev->interface) { #ifdef CONFIG_CROS_EC_SPI case CROS_EC_IF_SPI: @@ -280,6 +301,7 @@ static int send_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, default: ret = -1; } +#endif return ret; } @@ -990,6 +1012,7 @@ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state) return 0; } +#ifndef CONFIG_DM_CROS_EC /** * Decode EC interface details from the device tree and allocate a suitable * device. @@ -1055,11 +1078,61 @@ static int cros_ec_decode_fdt(const void *blob, int node, return 0; } +#endif -int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) +#ifdef CONFIG_DM_CROS_EC +int cros_ec_register(struct udevice *dev) { + struct cros_ec_dev *cdev = dev->uclass_priv; + const void *blob = gd->fdt_blob; + int node = dev->of_offset; char id[MSG_BYTES]; + + cdev->dev = dev; + fdtdec_decode_gpio(blob, node, "ec-interrupt", &cdev->ec_int); + cdev->optimise_flash_write = fdtdec_get_bool(blob, node, + "optimise-flash-write"); + + /* we will poll the EC interrupt line */ + fdtdec_setup_gpio(&cdev->ec_int); + if (fdt_gpio_isvalid(&cdev->ec_int)) { + gpio_request(cdev->ec_int.gpio, "cros-ec-irq"); + gpio_direction_input(cdev->ec_int.gpio); + } + + if (cros_ec_check_version(cdev)) { + debug("%s: Could not detect CROS-EC version\n", __func__); + return -CROS_EC_ERR_CHECK_VERSION; + } + + if (cros_ec_read_id(cdev, id, sizeof(id))) { + debug("%s: Could not read KBC ID\n", __func__); + return -CROS_EC_ERR_READ_ID; + } + + /* Remember this device for use by the cros_ec command */ + debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id); + + return 0; +} +#else +int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) +{ struct cros_ec_dev *dev; + char id[MSG_BYTES]; +#ifdef CONFIG_DM_CROS_EC + struct udevice *udev; + int ret; + + ret = uclass_find_device(UCLASS_CROS_EC, 0, &udev); + if (!ret) + device_remove(udev); + ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev); + if (ret) + return ret; + dev = udev->uclass_priv; + return 0; +#else int node = 0; *cros_ecp = NULL; @@ -1108,11 +1181,14 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) default: return 0; } +#endif /* we will poll the EC interrupt line */ fdtdec_setup_gpio(&dev->ec_int); - if (fdt_gpio_isvalid(&dev->ec_int)) + if (fdt_gpio_isvalid(&dev->ec_int)) { + gpio_request(dev->ec_int.gpio, "cros-ec-irq"); gpio_direction_input(dev->ec_int.gpio); + } if (cros_ec_check_version(dev)) { debug("%s: Could not detect CROS-EC version\n", __func__); @@ -1125,11 +1201,15 @@ int cros_ec_init(const void *blob, struct cros_ec_dev **cros_ecp) } /* Remember this device for use by the cros_ec command */ - last_dev = *cros_ecp = dev; + *cros_ecp = dev; +#ifndef CONFIG_DM_CROS_EC + last_dev = dev; +#endif debug("Google Chrome EC CROS-EC driver ready, id '%s'\n", id); return 0; } +#endif int cros_ec_decode_region(int argc, char * const argv[]) { @@ -1147,15 +1227,10 @@ int cros_ec_decode_region(int argc, char * const argv[]) return -1; } -int cros_ec_decode_ec_flash(const void *blob, struct fdt_cros_ec *config) +int cros_ec_decode_ec_flash(const void *blob, int node, + struct fdt_cros_ec *config) { - int flash_node, node; - - node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC); - if (node < 0) { - debug("Failed to find chrome-ec node'\n"); - return -1; - } + int flash_node; flash_node = fdt_subnode_offset(blob, node, "flash"); if (flash_node < 0) { @@ -1516,7 +1591,10 @@ static int cros_ec_i2c_passthrough(struct cros_ec_dev *dev, int flag, static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct cros_ec_dev *dev = last_dev; + struct cros_ec_dev *dev; +#ifdef CONFIG_DM_CROS_EC + struct udevice *udev; +#endif const char *cmd; int ret = 0; @@ -1525,19 +1603,31 @@ static int do_cros_ec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) cmd = argv[1]; if (0 == strcmp("init", cmd)) { +#ifndef CONFIG_DM_CROS_EC ret = cros_ec_init(gd->fdt_blob, &dev); if (ret) { printf("Could not init cros_ec device (err %d)\n", ret); return 1; } +#endif return 0; } +#ifdef CONFIG_DM_CROS_EC + ret = uclass_get_device(UCLASS_CROS_EC, 0, &udev); + if (ret) { + printf("Cannot get cros-ec device (err=%d)\n", ret); + return 1; + } + dev = udev->uclass_priv; +#else /* Just use the last allocated device; there should be only one */ if (!last_dev) { printf("No CROS-EC device available\n"); return 1; } + dev = last_dev; +#endif if (0 == strcmp("id", cmd)) { char id[MSG_BYTES]; @@ -1794,3 +1884,11 @@ U_BOOT_CMD( "crosec i2c mw chip address[.0, .1, .2] value [count] - write to I2C passthru (fill)" ); #endif + +#ifdef CONFIG_DM_CROS_EC +UCLASS_DRIVER(cros_ec) = { + .id = UCLASS_CROS_EC, + .name = "cros_ec", + .per_device_auto_alloc_size = sizeof(struct cros_ec_dev), +}; +#endif diff --git a/drivers/misc/cros_ec_lpc.c b/drivers/misc/cros_ec_lpc.c index 0e02671c93..07624a136f 100644 --- a/drivers/misc/cros_ec_lpc.c +++ b/drivers/misc/cros_ec_lpc.c @@ -54,7 +54,7 @@ int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, int csum; int i; - if (dout_len > EC_HOST_PARAM_SIZE) { + if (dout_len > EC_PROTO2_MAX_PARAM_SIZE) { debug("%s: Cannot send %d bytes\n", __func__, dout_len); return -1; } @@ -159,7 +159,7 @@ int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob) byte = 0xff; byte &= inb(EC_LPC_ADDR_HOST_CMD); byte &= inb(EC_LPC_ADDR_HOST_DATA); - for (i = 0; i < EC_HOST_PARAM_SIZE && (byte == 0xff); i++) + for (i = 0; i < EC_PROTO2_MAX_PARAM_SIZE && (byte == 0xff); i++) byte &= inb(EC_LPC_ADDR_HOST_PARAM + i); if (byte == 0xff) { debug("%s: CROS_EC device not found on LPC bus\n", diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c index 8a04af557d..99cc5297cf 100644 --- a/drivers/misc/cros_ec_sandbox.c +++ b/drivers/misc/cros_ec_sandbox.c @@ -8,6 +8,7 @@ #include <common.h> #include <cros_ec.h> +#include <dm.h> #include <ec_commands.h> #include <errno.h> #include <hash.h> @@ -85,7 +86,7 @@ struct ec_state { struct ec_keymatrix_entry *matrix; /* the key matrix info */ uint8_t keyscan[KEYBOARD_COLS]; bool recovery_req; -} s_state, *state; +} s_state, *g_state; /** * cros_ec_read_state() - read the sandbox EC state from the state file @@ -138,7 +139,7 @@ static int cros_ec_read_state(const void *blob, int node) */ static int cros_ec_write_state(void *blob, int node) { - struct ec_state *ec = &s_state; + struct ec_state *ec = g_state; /* We are guaranteed enough space to write basic properties */ fdt_setprop_u32(blob, node, "current-image", ec->current_image); @@ -369,7 +370,7 @@ static int process_cmd(struct ec_state *ec, struct fmap_entry *entry; int ret, size; - entry = &state->ec_config.region[EC_FLASH_REGION_RW]; + entry = &ec->ec_config.region[EC_FLASH_REGION_RW]; switch (req->cmd) { case EC_VBOOT_HASH_RECALC: @@ -426,7 +427,7 @@ static int process_cmd(struct ec_state *ec, case EC_FLASH_REGION_RO: case EC_FLASH_REGION_RW: case EC_FLASH_REGION_WP_RO: - entry = &state->ec_config.region[req->region]; + entry = &ec->ec_config.region[req->region]; resp->offset = entry->offset; resp->size = entry->length; len = sizeof(*resp); @@ -466,16 +467,24 @@ static int process_cmd(struct ec_state *ec, return len; } +#ifdef CONFIG_DM_CROS_EC +int cros_ec_sandbox_packet(struct udevice *udev, int out_bytes, int in_bytes) +{ + struct cros_ec_dev *dev = udev->uclass_priv; + struct ec_state *ec = dev_get_priv(dev->dev); +#else int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes) { + struct ec_state *ec = &s_state; +#endif struct ec_host_request *req_hdr = (struct ec_host_request *)dev->dout; const void *req_data = req_hdr + 1; struct ec_host_response *resp_hdr = (struct ec_host_response *)dev->din; void *resp_data = resp_hdr + 1; int len; - len = process_cmd(&s_state, req_hdr, req_data, resp_hdr, resp_data); + len = process_cmd(ec, req_hdr, req_data, resp_hdr, resp_data); if (len < 0) return len; @@ -498,7 +507,11 @@ int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob) void cros_ec_check_keyboard(struct cros_ec_dev *dev) { +#ifdef CONFIG_DM_CROS_EC + struct ec_state *ec = dev_get_priv(dev->dev); +#else struct ec_state *ec = &s_state; +#endif ulong start; printf("Press keys for EC to detect on reset (ESC=recovery)..."); @@ -512,6 +525,52 @@ void cros_ec_check_keyboard(struct cros_ec_dev *dev) } } +#ifdef CONFIG_DM_CROS_EC +int cros_ec_probe(struct udevice *dev) +{ + struct ec_state *ec = dev->priv; + struct cros_ec_dev *cdev = dev->uclass_priv; + const void *blob = gd->fdt_blob; + int node; + int err; + + memcpy(ec, &s_state, sizeof(*ec)); + err = cros_ec_decode_ec_flash(blob, dev->of_offset, &ec->ec_config); + if (err) + return err; + + node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC_KEYB); + if (node < 0) { + debug("%s: No cros_ec keyboard found\n", __func__); + } else if (keyscan_read_fdt_matrix(ec, blob, node)) { + debug("%s: Could not read key matrix\n", __func__); + return -1; + } + + /* If we loaded EC data, check that the length matches */ + if (ec->flash_data && + ec->flash_data_len != ec->ec_config.flash.length) { + printf("EC data length is %x, expected %x, discarding data\n", + ec->flash_data_len, ec->ec_config.flash.length); + os_free(ec->flash_data); + ec->flash_data = NULL; + } + + /* Otherwise allocate the memory */ + if (!ec->flash_data) { + ec->flash_data_len = ec->ec_config.flash.length; + ec->flash_data = os_malloc(ec->flash_data_len); + if (!ec->flash_data) + return -ENOMEM; + } + + cdev->dev = dev; + g_state = ec; + return cros_ec_register(dev); +} + +#else + /** * Initialize sandbox EC emulation. * @@ -525,8 +584,13 @@ int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob) int node; int err; - state = &s_state; - err = cros_ec_decode_ec_flash(blob, &ec->ec_config); + node = fdtdec_next_compatible(blob, 0, COMPAT_GOOGLE_CROS_EC); + if (node < 0) { + debug("Failed to find chrome-ec node'\n"); + return -1; + } + + err = cros_ec_decode_ec_flash(blob, node, &ec->ec_config); if (err) return err; @@ -557,3 +621,24 @@ int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob) return 0; } +#endif + +#ifdef CONFIG_DM_CROS_EC +struct dm_cros_ec_ops cros_ec_ops = { + .packet = cros_ec_sandbox_packet, +}; + +static const struct udevice_id cros_ec_ids[] = { + { .compatible = "google,cros-ec" }, + { } +}; + +U_BOOT_DRIVER(cros_ec_sandbox) = { + .name = "cros_ec", + .id = UCLASS_CROS_EC, + .of_match = cros_ec_ids, + .probe = cros_ec_probe, + .priv_auto_alloc_size = sizeof(struct ec_state), + .ops = &cros_ec_ops, +}; +#endif diff --git a/drivers/misc/cros_ec_spi.c b/drivers/misc/cros_ec_spi.c index 015333f139..e403664bb5 100644 --- a/drivers/misc/cros_ec_spi.c +++ b/drivers/misc/cros_ec_spi.c @@ -15,23 +15,34 @@ #include <common.h> #include <cros_ec.h> +#include <dm.h> +#include <errno.h> #include <spi.h> +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_DM_CROS_EC +int cros_ec_spi_packet(struct udevice *udev, int out_bytes, int in_bytes) +{ + struct cros_ec_dev *dev = udev->uclass_priv; +#else int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes) { +#endif + struct spi_slave *slave = dev_get_parentdata(dev->dev); int rv; /* Do the transfer */ - if (spi_claim_bus(dev->spi)) { + if (spi_claim_bus(slave)) { debug("%s: Cannot claim SPI bus\n", __func__); return -1; } - rv = spi_xfer(dev->spi, max(out_bytes, in_bytes) * 8, + rv = spi_xfer(slave, max(out_bytes, in_bytes) * 8, dev->dout, dev->din, SPI_XFER_BEGIN | SPI_XFER_END); - spi_release_bus(dev->spi); + spi_release_bus(slave); if (rv) { debug("%s: Cannot complete SPI transfer\n", __func__); @@ -56,10 +67,19 @@ int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes) * @param din_len Maximum size of response in bytes * @return number of bytes in response, or -1 on error */ +#ifdef CONFIG_DM_CROS_EC +int cros_ec_spi_command(struct udevice *udev, uint8_t cmd, int cmd_version, + const uint8_t *dout, int dout_len, + uint8_t **dinp, int din_len) +{ + struct cros_ec_dev *dev = udev->uclass_priv; +#else int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, const uint8_t *dout, int dout_len, uint8_t **dinp, int din_len) { +#endif + struct spi_slave *slave = dev_get_parentdata(dev->dev); int in_bytes = din_len + 4; /* status, length, checksum, trailer */ uint8_t *out; uint8_t *p; @@ -92,7 +112,7 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, */ memset(dev->din, '\0', in_bytes); - if (spi_claim_bus(dev->spi)) { + if (spi_claim_bus(slave)) { debug("%s: Cannot claim SPI bus\n", __func__); return -1; } @@ -113,10 +133,10 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, p = dev->din + sizeof(int64_t) - 2; len = dout_len + 4; cros_ec_dump_data("out", cmd, out, len); - rv = spi_xfer(dev->spi, max(len, in_bytes) * 8, out, p, + rv = spi_xfer(slave, max(len, in_bytes) * 8, out, p, SPI_XFER_BEGIN | SPI_XFER_END); - spi_release_bus(dev->spi); + spi_release_bus(slave); if (rv) { debug("%s: Cannot complete SPI transfer\n", __func__); @@ -146,6 +166,7 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, return len; } +#ifndef CONFIG_DM_CROS_EC int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob) { /* Decode interface-specific FDT params */ @@ -165,11 +186,59 @@ int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob) */ int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob) { - dev->spi = spi_setup_slave_fdt(blob, dev->node, dev->parent_node); - if (!dev->spi) { + int ret; + + ret = spi_setup_slave_fdt(blob, dev->node, dev->parent_node, + &slave); + if (ret) { debug("%s: Could not setup SPI slave\n", __func__); - return -1; + return ret; } return 0; } +#endif + +#ifdef CONFIG_DM_CROS_EC +int cros_ec_probe(struct udevice *dev) +{ + struct spi_slave *slave = dev_get_parentdata(dev); + int ret; + + /* + * TODO(sjg@chromium.org) + * + * This is really horrible at present. It is an artifact of removing + * the child_pre_probe() method for SPI. Everything here could go in + * an automatic function, except that spi_get_bus_and_cs() wants to + * set it up manually and call device_probe_child(). + * + * The solution may be to re-enable the child_pre_probe() method for + * SPI and have it do nothing if the child is already passed in via + * device_probe_child(). + */ + slave->dev = dev; + ret = spi_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, slave); + if (ret) + return ret; + return cros_ec_register(dev); +} + +struct dm_cros_ec_ops cros_ec_ops = { + .packet = cros_ec_spi_packet, + .command = cros_ec_spi_command, +}; + +static const struct udevice_id cros_ec_ids[] = { + { .compatible = "google,cros-ec" }, + { } +}; + +U_BOOT_DRIVER(cros_ec_spi) = { + .name = "cros_ec", + .id = UCLASS_CROS_EC, + .of_match = cros_ec_ids, + .probe = cros_ec_probe, + .ops = &cros_ec_ops, +}; +#endif diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 82079d67cd..92f7d8942f 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -40,6 +40,7 @@ #include <malloc.h> #include <sdhci.h> #include <asm/arch/timer.h> +#include <asm/arch-bcm2835/sdhci.h> /* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000 diff --git a/drivers/mmc/mvebu_mmc.c b/drivers/mmc/mvebu_mmc.c index d34e74357f..9f98c3f37c 100644 --- a/drivers/mmc/mvebu_mmc.c +++ b/drivers/mmc/mvebu_mmc.c @@ -14,7 +14,7 @@ #include <mmc.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <mvebu_mmc.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 5b0c302069..ef2cbf9e2f 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -67,14 +67,19 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, #ifdef OMAP_HSMMC_USE_GPIO static int omap_mmc_setup_gpio_in(int gpio, const char *label) { - if (!gpio_is_valid(gpio)) - return -1; + int ret; - if (gpio_request(gpio, label) < 0) +#ifndef CONFIG_DM_GPIO + if (!gpio_is_valid(gpio)) return -1; +#endif + ret = gpio_request(gpio, label); + if (ret) + return ret; - if (gpio_direction_input(gpio) < 0) - return -1; + ret = gpio_direction_input(gpio); + if (ret) + return ret; return gpio; } diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index 637dd972a5..0dea45d079 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -102,6 +102,7 @@ struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS]; static int do_sdhci_init(struct sdhci_host *host) { + char str[20]; int dev_id, flag; int err = 0; @@ -109,6 +110,8 @@ static int do_sdhci_init(struct sdhci_host *host) dev_id = host->index + PERIPH_ID_SDMMC0; if (fdt_gpio_isvalid(&host->pwr_gpio)) { + sprintf(str, "sdhci%d_power", host->index & 0xf); + gpio_request(host->pwr_gpio.gpio, str); gpio_direction_output(host->pwr_gpio.gpio, 1); err = exynos_pinmux_config(dev_id, flag); if (err) { @@ -118,7 +121,9 @@ static int do_sdhci_init(struct sdhci_host *host) } if (fdt_gpio_isvalid(&host->cd_gpio)) { - gpio_direction_output(host->cd_gpio.gpio, 0xf); + sprintf(str, "sdhci%d_cd", host->index & 0xf); + gpio_request(host->cd_gpio.gpio, str); + gpio_direction_output(host->cd_gpio.gpio, 1); if (gpio_get_value(host->cd_gpio.gpio)) return -ENODEV; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 3125d13ba3..de88e19609 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -124,7 +124,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, #endif #define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100 -int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, +static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct sdhci_host *host = mmc->priv; @@ -355,7 +355,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); } -void sdhci_set_ios(struct mmc *mmc) +static void sdhci_set_ios(struct mmc *mmc) { u32 ctrl; struct sdhci_host *host = mmc->priv; @@ -393,7 +393,7 @@ void sdhci_set_ios(struct mmc *mmc) sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); } -int sdhci_init(struct mmc *mmc) +static int sdhci_init(struct mmc *mmc) { struct sdhci_host *host = mmc->priv; diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index d4e574fe19..16592e3d7c 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -14,12 +14,13 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm-generic/gpio.h> struct sunxi_mmc_host { unsigned mmc_no; uint32_t *mclkreg; - unsigned database; unsigned fatal_err; unsigned mod_clk; struct sunxi_mmc *reg; @@ -57,7 +58,6 @@ static int mmc_resource_init(int sdc_no) printf("Wrong mmc number %d\n", sdc_no); return -1; } - mmchost->database = (unsigned int)mmchost->reg + 0x100; mmchost->mmc_no = sdc_no; return 0; @@ -75,6 +75,11 @@ static int mmc_clk_io_on(int sdc_no) /* config ahb clock */ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) + /* unassert reset */ + setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no)); +#endif + /* config mod clock */ pll_clk = clock_get_pll6(); /* should be close to 100 MHz but no more, so round up */ @@ -194,9 +199,9 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) } if (reading) - buff[i] = readl(mmchost->database); + buff[i] = readl(&mmchost->reg->fifo); else - writel(buff[i], mmchost->database); + writel(buff[i], &mmchost->reg->fifo); } return 0; @@ -343,13 +348,32 @@ out: return error; } +static int sunxi_mmc_getcd(struct mmc *mmc) +{ + struct sunxi_mmc_host *mmchost = mmc->priv; + int cd_pin = -1; + + switch (mmchost->mmc_no) { + case 0: cd_pin = sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); break; + case 1: cd_pin = sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); break; + case 2: cd_pin = sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); break; + case 3: cd_pin = sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); break; + } + + if (cd_pin == -1) + return 1; + + return !gpio_direction_input(cd_pin); +} + static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = mmc_send_cmd, .set_ios = mmc_set_ios, .init = mmc_core_init, + .getcd = sunxi_mmc_getcd, }; -int sunxi_mmc_init(int sdc_no) +struct mmc *sunxi_mmc_init(int sdc_no) { struct mmc_config *cfg = &mmc_host[sdc_no].cfg; @@ -361,6 +385,9 @@ int sunxi_mmc_init(int sdc_no) cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; cfg->host_caps = MMC_MODE_4BIT; cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) || defined(CONFIG_SUN8I) + cfg->host_caps |= MMC_MODE_HC; +#endif cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; cfg->f_min = 400000; @@ -369,8 +396,5 @@ int sunxi_mmc_init(int sdc_no) mmc_resource_init(sdc_no); mmc_clk_io_on(sdc_no); - if (mmc_create(cfg, &mmc_host[sdc_no]) == NULL) - return -1; - - return 0; + return mmc_create(cfg, &mmc_host[sdc_no]); } diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index ca9c4aa15f..2bd36b0ee7 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -13,6 +13,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/mmc.h> #include <asm/arch-tegra/tegra_mmc.h> #include <mmc.h> @@ -292,7 +293,7 @@ static int mmc_send_cmd_bounced(struct mmc *mmc, struct mmc_cmd *cmd, /* Transfer Complete */ debug("r/w is done\n"); break; - } else if (get_timer(start) > 2000UL) { + } else if (get_timer(start) > 8000UL) { writel(mask, &host->reg->norintsts); printf("%s: MMC Timeout\n" " Interrupt status 0x%08x\n" @@ -508,7 +509,7 @@ static int tegra_mmc_core_init(struct mmc *mmc) return 0; } -int tegra_mmc_getcd(struct mmc *mmc) +static int tegra_mmc_getcd(struct mmc *mmc) { struct mmc_host *host = mmc->priv; diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 9b3175d87f..50983b837b 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -63,6 +63,12 @@ flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT #endif +#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define __maybe_weak __weak +#else +#define __maybe_weak static +#endif + /* * 0xffff is an undefined value for the configuration register. When * this value is returned, the configuration register shall not be @@ -81,14 +87,12 @@ static u16 cfi_flash_config_reg(int i) int cfi_flash_num_flash_banks = CONFIG_SYS_MAX_FLASH_BANKS_DETECT; #endif -static phys_addr_t __cfi_flash_bank_addr(int i) +__weak phys_addr_t cfi_flash_bank_addr(int i) { return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i]; } -phys_addr_t cfi_flash_bank_addr(int i) - __attribute__((weak, alias("__cfi_flash_bank_addr"))); -static unsigned long __cfi_flash_bank_size(int i) +__weak unsigned long cfi_flash_bank_size(int i) { #ifdef CONFIG_SYS_FLASH_BANKS_SIZES return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; @@ -96,71 +100,49 @@ static unsigned long __cfi_flash_bank_size(int i) return 0; #endif } -unsigned long cfi_flash_bank_size(int i) - __attribute__((weak, alias("__cfi_flash_bank_size"))); -static void __flash_write8(u8 value, void *addr) +__maybe_weak void flash_write8(u8 value, void *addr) { __raw_writeb(value, addr); } -static void __flash_write16(u16 value, void *addr) +__maybe_weak void flash_write16(u16 value, void *addr) { __raw_writew(value, addr); } -static void __flash_write32(u32 value, void *addr) +__maybe_weak void flash_write32(u32 value, void *addr) { __raw_writel(value, addr); } -static void __flash_write64(u64 value, void *addr) +__maybe_weak void flash_write64(u64 value, void *addr) { /* No architectures currently implement __raw_writeq() */ *(volatile u64 *)addr = value; } -static u8 __flash_read8(void *addr) +__maybe_weak u8 flash_read8(void *addr) { return __raw_readb(addr); } -static u16 __flash_read16(void *addr) +__maybe_weak u16 flash_read16(void *addr) { return __raw_readw(addr); } -static u32 __flash_read32(void *addr) +__maybe_weak u32 flash_read32(void *addr) { return __raw_readl(addr); } -static u64 __flash_read64(void *addr) +__maybe_weak u64 flash_read64(void *addr) { /* No architectures currently implement __raw_readq() */ return *(volatile u64 *)addr; } -#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS -void flash_write8(u8 value, void *addr)__attribute__((weak, alias("__flash_write8"))); -void flash_write16(u16 value, void *addr)__attribute__((weak, alias("__flash_write16"))); -void flash_write32(u32 value, void *addr)__attribute__((weak, alias("__flash_write32"))); -void flash_write64(u64 value, void *addr)__attribute__((weak, alias("__flash_write64"))); -u8 flash_read8(void *addr)__attribute__((weak, alias("__flash_read8"))); -u16 flash_read16(void *addr)__attribute__((weak, alias("__flash_read16"))); -u32 flash_read32(void *addr)__attribute__((weak, alias("__flash_read32"))); -u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); -#else -#define flash_write8 __flash_write8 -#define flash_write16 __flash_write16 -#define flash_write32 __flash_write32 -#define flash_write64 __flash_write64 -#define flash_read8 __flash_read8 -#define flash_read16 __flash_read16 -#define flash_read32 __flash_read32 -#define flash_read64 __flash_read64 -#endif - /*----------------------------------------------------------------------- */ #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c index 3e5fb0cd65..4fc34d6b9f 100644 --- a/drivers/mtd/nand/kirkwood_nand.c +++ b/drivers/mtd/nand/kirkwood_nand.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <nand.h> /* NAND Flash Soc registers */ diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index db1599e9a6..40d670563c 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -75,7 +75,7 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd, #ifdef CONFIG_SPL_BUILD /* Check wait pin as dev ready indicator */ -int omap_spl_dev_ready(struct mtd_info *mtd) +static int omap_spl_dev_ready(struct mtd_info *mtd) { return gpmc_cfg->status & (1 << 8); } @@ -162,23 +162,6 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat, } /* - * omap_reverse_list - re-orders list elements in reverse order [internal] - * @list: pointer to start of list - * @length: length of list -*/ -void omap_reverse_list(u8 *list, unsigned int length) -{ - unsigned int i, j; - unsigned int half_length = length / 2; - u8 tmp; - for (i = 0, j = length - 1; i < half_length; i++, j--) { - tmp = list[i]; - list[i] = list[j]; - list[j] = tmp; - } -} - -/* * omap_enable_hwecc - configures GPMC as per ECC scheme before read/write * @mtd: MTD device structure * @mode: Read/Write mode @@ -351,6 +334,23 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, #ifdef CONFIG_NAND_OMAP_ELM /* + * omap_reverse_list - re-orders list elements in reverse order [internal] + * @list: pointer to start of list + * @length: length of list +*/ +static void omap_reverse_list(u8 *list, unsigned int length) +{ + unsigned int i, j; + unsigned int half_length = length / 2; + u8 tmp; + for (i = 0, j = length - 1; i < half_length; i++, j--) { + tmp = list[i]; + list[i] = list[j]; + list[j] = tmp; + } +} + +/* * omap_correct_data_bch - Compares the ecc read from nand spare area * with ECC registers values and corrects one bit error if it has occured * diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 9e18fb41de..15789a07d8 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -5,13 +5,18 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif +#ifndef CONFIG_DM_SPI +obj-$(CONFIG_SPI_FLASH) += sf_probe.o +#endif obj-$(CONFIG_CMD_SF) += sf.o -obj-$(CONFIG_SPI_FLASH) += sf_params.o sf_probe.o sf_ops.o +obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o obj-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c index d50da37c89..a23032cca5 100644 --- a/drivers/mtd/spi/ramtron.c +++ b/drivers/mtd/spi/ramtron.c @@ -35,6 +35,7 @@ #include <common.h> #include <malloc.h> +#include <spi.h> #include <spi_flash.h> #include "sf_internal.h" diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c index 98e0a34d4e..1cf2f98310 100644 --- a/drivers/mtd/spi/sandbox.c +++ b/drivers/mtd/spi/sandbox.c @@ -9,6 +9,7 @@ */ #include <common.h> +#include <dm.h> #include <malloc.h> #include <spi.h> #include <os.h> @@ -19,6 +20,11 @@ #include <asm/getopt.h> #include <asm/spi.h> #include <asm/state.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <dm/uclass-internal.h> + +DECLARE_GLOBAL_DATA_PTR; /* * The different states that our SPI flash transitions between. @@ -34,12 +40,14 @@ enum sandbox_sf_state { SF_ERASE, /* erase the flash */ SF_READ_STATUS, /* read the flash's status register */ SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/ + SF_WRITE_STATUS, /* write the flash's status register */ }; static const char *sandbox_sf_state_name(enum sandbox_sf_state state) { static const char * const states[] = { "CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS", + "READ_STATUS1", "WRITE_STATUS", }; return states[state]; } @@ -58,6 +66,7 @@ static u8 sandbox_sf_0xff[0x1000]; /* Internal state data for each SPI flash */ struct sandbox_spi_flash { + unsigned int cs; /* Chip select we are attached to */ /* * As we receive data over the SPI bus, our flash transitions * between states. For example, we start off in the SF_CMD @@ -84,71 +93,124 @@ struct sandbox_spi_flash { int fd; }; -static int sandbox_sf_setup(void **priv, const char *spec) +struct sandbox_spi_flash_plat_data { + const char *filename; + const char *device_name; + int bus; + int cs; +}; + +/** + * This is a very strange probe function. If it has platform data (which may + * have come from the device tree) then this function gets the filename and + * device type from there. Failing that it looks at the command line + * parameter. + */ +static int sandbox_sf_probe(struct udevice *dev) { /* spec = idcode:file */ - struct sandbox_spi_flash *sbsf; + struct sandbox_spi_flash *sbsf = dev_get_priv(dev); const char *file; size_t len, idname_len; const struct spi_flash_params *data; - - file = strchr(spec, ':'); - if (!file) { - printf("sandbox_sf: unable to parse file\n"); - goto error; + struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev); + struct sandbox_state *state = state_get_current(); + struct udevice *bus = dev->parent; + const char *spec = NULL; + int ret = 0; + int cs = -1; + int i; + + debug("%s: bus %d, looking for emul=%p: ", __func__, bus->seq, dev); + if (bus->seq >= 0 && bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS) { + for (i = 0; i < CONFIG_SANDBOX_SPI_MAX_CS; i++) { + if (state->spi[bus->seq][i].emul == dev) + cs = i; + } + } + if (cs == -1) { + printf("Error: Unknown chip select for device '%s'", + dev->name); + return -EINVAL; + } + debug("found at cs %d\n", cs); + + if (!pdata->filename) { + struct sandbox_state *state = state_get_current(); + + assert(bus->seq != -1); + if (bus->seq < CONFIG_SANDBOX_SPI_MAX_BUS) + spec = state->spi[bus->seq][cs].spec; + if (!spec) + return -ENOENT; + + file = strchr(spec, ':'); + if (!file) { + printf("sandbox_sf: unable to parse file\n"); + ret = -EINVAL; + goto error; + } + idname_len = file - spec; + pdata->filename = file + 1; + pdata->device_name = spec; + ++file; + } else { + spec = strchr(pdata->device_name, ','); + if (spec) + spec++; + else + spec = pdata->device_name; + idname_len = strlen(spec); } - idname_len = file - spec; - ++file; + debug("%s: device='%s'\n", __func__, spec); for (data = spi_flash_params_table; data->name; data++) { len = strlen(data->name); if (idname_len != len) continue; - if (!memcmp(spec, data->name, len)) + if (!strncasecmp(spec, data->name, len)) break; } if (!data->name) { printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len, spec); + ret = -EINVAL; goto error; } if (sandbox_sf_0xff[0] == 0x00) memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff)); - sbsf = calloc(sizeof(*sbsf), 1); - if (!sbsf) { - printf("sandbox_sf: out of memory\n"); - goto error; - } - - sbsf->fd = os_open(file, 02); + sbsf->fd = os_open(pdata->filename, 02); if (sbsf->fd == -1) { free(sbsf); - printf("sandbox_sf: unable to open file '%s'\n", file); + printf("sandbox_sf: unable to open file '%s'\n", + pdata->filename); + ret = -EIO; goto error; } sbsf->data = data; + sbsf->cs = cs; - *priv = sbsf; return 0; error: - return 1; + return ret; } -static void sandbox_sf_free(void *priv) +static int sandbox_sf_remove(struct udevice *dev) { - struct sandbox_spi_flash *sbsf = priv; + struct sandbox_spi_flash *sbsf = dev_get_priv(dev); os_close(sbsf->fd); - free(sbsf); + + return 0; } -static void sandbox_sf_cs_activate(void *priv) +static void sandbox_sf_cs_activate(struct udevice *dev) { - struct sandbox_spi_flash *sbsf = priv; + struct sandbox_spi_flash *sbsf = dev_get_priv(dev); debug("sandbox_sf: CS activated; state is fresh!\n"); @@ -160,11 +222,24 @@ static void sandbox_sf_cs_activate(void *priv) sbsf->cmd = SF_CMD; } -static void sandbox_sf_cs_deactivate(void *priv) +static void sandbox_sf_cs_deactivate(struct udevice *dev) { debug("sandbox_sf: CS deactivated; cmd done processing!\n"); } +/* + * There are times when the data lines are allowed to tristate. What + * is actually sensed on the line depends on the hardware. It could + * always be 0xFF/0x00 (if there are pull ups/downs), or things could + * float and so we'd get garbage back. This func encapsulates that + * scenario so we can worry about the details here. + */ +static void sandbox_spi_tristate(u8 *buf, uint len) +{ + /* XXX: make this into a user config option ? */ + memset(buf, 0xff, len); +} + /* Figure out what command this stream is telling us to do */ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, u8 *tx) @@ -172,7 +247,8 @@ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, enum sandbox_sf_state oldstate = sbsf->state; /* We need to output a byte for the cmd byte we just ate */ - sandbox_spi_tristate(tx, 1); + if (tx) + sandbox_spi_tristate(tx, 1); sbsf->cmd = rx[0]; switch (sbsf->cmd) { @@ -200,6 +276,9 @@ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, debug(" write enabled\n"); sbsf->status |= STAT_WEL; break; + case CMD_WRITE_STATUS: + sbsf->state = SF_WRITE_STATUS; + break; default: { int flags = sbsf->data->flags; @@ -216,7 +295,7 @@ static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, sbsf->erase_size = 64 << 10; } else { debug(" cmd unknown: %#x\n", sbsf->cmd); - return 1; + return -EIO; } sbsf->state = SF_ADDR; break; @@ -246,20 +325,27 @@ int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size) return 0; } -static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, - uint bytes) +static int sandbox_sf_xfer(struct udevice *dev, unsigned int bitlen, + const void *rxp, void *txp, unsigned long flags) { - struct sandbox_spi_flash *sbsf = priv; + struct sandbox_spi_flash *sbsf = dev_get_priv(dev); + const uint8_t *rx = rxp; + uint8_t *tx = txp; uint cnt, pos = 0; + int bytes = bitlen / 8; int ret; debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state, sandbox_sf_state_name(sbsf->state), bytes); + if ((flags & SPI_XFER_BEGIN)) + sandbox_sf_cs_activate(dev); + if (sbsf->state == SF_CMD) { /* Figure out the initial state */ - if (sandbox_sf_process_cmd(sbsf, rx, tx)) - return 1; + ret = sandbox_sf_process_cmd(sbsf, rx, tx); + if (ret) + return ret; ++pos; } @@ -290,7 +376,9 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, sbsf->off = (sbsf->off << 8) | rx[pos]; debug("addr:%06x\n", sbsf->off); - sandbox_spi_tristate(&tx[pos++], 1); + if (tx) + sandbox_spi_tristate(&tx[pos], 1); + pos++; /* See if we're done processing */ if (sbsf->addr_bytes < @@ -300,7 +388,7 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, /* Next state! */ if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) { puts("sandbox_sf: os_lseek() failed"); - return 1; + return -EIO; } switch (sbsf->cmd) { case CMD_READ_ARRAY_FAST: @@ -326,10 +414,11 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, cnt = bytes - pos; debug(" tx: read(%u)\n", cnt); + assert(tx); ret = os_read(sbsf->fd, tx + pos, cnt); if (ret < 0) { - puts("sandbox_spi: os_read() failed\n"); - return 1; + puts("sandbox_sf: os_read() failed\n"); + return -EIO; } pos += ret; break; @@ -345,6 +434,10 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, memset(tx + pos, sbsf->status >> 8, cnt); pos += cnt; break; + case SF_WRITE_STATUS: + debug(" write status: %#x (ignored)\n", rx[pos]); + pos = bytes; + break; case SF_WRITE: /* * XXX: need to handle exotic behavior: @@ -359,11 +452,12 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, cnt = bytes - pos; debug(" rx: write(%u)\n", cnt); - sandbox_spi_tristate(&tx[pos], cnt); + if (tx) + sandbox_spi_tristate(&tx[pos], cnt); ret = os_write(sbsf->fd, rx + pos, cnt); if (ret < 0) { puts("sandbox_spi: os_write() failed\n"); - return 1; + return -EIO; } pos += ret; sbsf->status &= ~STAT_WEL; @@ -388,7 +482,8 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, sbsf->erase_size); cnt = bytes - pos; - sandbox_spi_tristate(&tx[pos], cnt); + if (tx) + sandbox_spi_tristate(&tx[pos], cnt); pos += cnt; /* @@ -410,17 +505,33 @@ static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, } done: - return pos == bytes ? 0 : 1; + if (flags & SPI_XFER_END) + sandbox_sf_cs_deactivate(dev); + return pos == bytes ? 0 : -EIO; +} + +int sandbox_sf_ofdata_to_platdata(struct udevice *dev) +{ + struct sandbox_spi_flash_plat_data *pdata = dev_get_platdata(dev); + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + + pdata->filename = fdt_getprop(blob, node, "sandbox,filename", NULL); + pdata->device_name = fdt_getprop(blob, node, "compatible", NULL); + if (!pdata->filename || !pdata->device_name) { + debug("%s: Missing properties, filename=%s, device_name=%s\n", + __func__, pdata->filename, pdata->device_name); + return -EINVAL; + } + + return 0; } -static const struct sandbox_spi_emu_ops sandbox_sf_ops = { - .setup = sandbox_sf_setup, - .free = sandbox_sf_free, - .cs_activate = sandbox_sf_cs_activate, - .cs_deactivate = sandbox_sf_cs_deactivate, +static const struct dm_spi_emul_ops sandbox_sf_emul_ops = { .xfer = sandbox_sf_xfer, }; +#ifdef CONFIG_SPI_FLASH static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state, const char *arg) { @@ -438,8 +549,141 @@ static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state, * spec here, but the problem is that no U-Boot init has been done * yet. Perhaps we can figure something out. */ - state->spi[bus][cs].ops = &sandbox_sf_ops; state->spi[bus][cs].spec = spec; return 0; } SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>"); + +int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs, + struct udevice *bus, int of_offset, const char *spec) +{ + struct udevice *emul; + char name[20], *str; + struct driver *drv; + int ret; + + /* now the emulator */ + strncpy(name, spec, sizeof(name) - 6); + name[sizeof(name) - 6] = '\0'; + strcat(name, "-emul"); + str = strdup(name); + if (!str) + return -ENOMEM; + drv = lists_driver_lookup_name("sandbox_sf_emul"); + if (!drv) { + puts("Cannot find sandbox_sf_emul driver\n"); + return -ENOENT; + } + ret = device_bind(bus, drv, str, NULL, of_offset, &emul); + if (ret) { + printf("Cannot create emul device for spec '%s' (err=%d)\n", + spec, ret); + return ret; + } + state->spi[busnum][cs].emul = emul; + + return 0; +} + +void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs) +{ + state->spi[busnum][cs].emul = NULL; +} + +static int sandbox_sf_bind_bus_cs(struct sandbox_state *state, int busnum, + int cs, const char *spec) +{ + struct udevice *bus, *slave; + int ret; + + ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, true, &bus); + if (ret) { + printf("Invalid bus %d for spec '%s' (err=%d)\n", busnum, + spec, ret); + return ret; + } + ret = device_find_child_by_seq(bus, cs, true, &slave); + if (!ret) { + printf("Chip select %d already exists for spec '%s'\n", cs, + spec); + return -EEXIST; + } + + ret = spi_bind_device(bus, cs, "spi_flash_std", spec, &slave); + if (ret) + return ret; + + return sandbox_sf_bind_emul(state, busnum, cs, bus, -1, spec); +} + +int sandbox_spi_get_emul(struct sandbox_state *state, + struct udevice *bus, struct udevice *slave, + struct udevice **emulp) +{ + struct sandbox_spi_info *info; + int busnum = bus->seq; + int cs = spi_chip_select(slave); + int ret; + + info = &state->spi[busnum][cs]; + if (!info->emul) { + /* Use the same device tree node as the SPI flash device */ + debug("%s: busnum=%u, cs=%u: binding SPI flash emulation: ", + __func__, busnum, cs); + ret = sandbox_sf_bind_emul(state, busnum, cs, bus, + slave->of_offset, slave->name); + if (ret) { + debug("failed (err=%d)\n", ret); + return ret; + } + debug("OK\n"); + } + *emulp = info->emul; + + return 0; +} + +int dm_scan_other(bool pre_reloc_only) +{ + struct sandbox_state *state = state_get_current(); + int busnum, cs; + + if (pre_reloc_only) + return 0; + for (busnum = 0; busnum < CONFIG_SANDBOX_SPI_MAX_BUS; busnum++) { + for (cs = 0; cs < CONFIG_SANDBOX_SPI_MAX_CS; cs++) { + const char *spec = state->spi[busnum][cs].spec; + int ret; + + if (spec) { + ret = sandbox_sf_bind_bus_cs(state, busnum, + cs, spec); + if (ret) { + debug("%s: Bind failed for bus %d, cs %d\n", + __func__, busnum, cs); + return ret; + } + } + } + } + + return 0; +} +#endif + +static const struct udevice_id sandbox_sf_ids[] = { + { .compatible = "sandbox,spi-flash" }, + { } +}; + +U_BOOT_DRIVER(sandbox_sf_emul) = { + .name = "sandbox_sf_emul", + .id = UCLASS_SPI_EMUL, + .of_match = sandbox_sf_ids, + .ofdata_to_platdata = sandbox_sf_ofdata_to_platdata, + .probe = sandbox_sf_probe, + .remove = sandbox_sf_remove, + .priv_auto_alloc_size = sizeof(struct sandbox_spi_flash), + .platdata_auto_alloc_size = sizeof(struct sandbox_spi_flash_plat_data), + .ops = &sandbox_sf_emul_ops, +}; diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c new file mode 100644 index 0000000000..376d815026 --- /dev/null +++ b/drivers/mtd/spi/sf-uclass.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <spi.h> +#include <spi_flash.h> +#include <dm/device-internal.h> +#include "sf_internal.h" + +/* + * TODO(sjg@chromium.org): This is an old-style function. We should remove + * it when all SPI flash drivers use dm + */ +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct udevice *dev; + + if (spi_flash_probe_bus_cs(bus, cs, max_hz, spi_mode, &dev)) + return NULL; + + return dev->uclass_priv; +} + +void spi_flash_free(struct spi_flash *flash) +{ + spi_flash_remove(flash->spi->dev); +} + +int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode, + struct udevice **devp) +{ + struct spi_slave *slave; + struct udevice *bus; + char name[20], *str; + int ret; + + snprintf(name, sizeof(name), "%d:%d", busnum, cs); + str = strdup(name); + ret = spi_get_bus_and_cs(busnum, cs, max_hz, spi_mode, + "spi_flash_std", str, &bus, &slave); + if (ret) + return ret; + + *devp = slave->dev; + return 0; +} + +int spi_flash_remove(struct udevice *dev) +{ + return device_remove(dev); +} + +UCLASS_DRIVER(spi_flash) = { + .id = UCLASS_SPI_FLASH, + .name = "spi_flash", + .per_device_auto_alloc_size = sizeof(struct spi_flash), +}; diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 19d49146eb..5b7670c9aa 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -10,6 +10,36 @@ #ifndef _SF_INTERNAL_H_ #define _SF_INTERNAL_H_ +#include <linux/types.h> +#include <linux/compiler.h> + +/* Dual SPI flash memories - see SPI_COMM_DUAL_... */ +enum spi_dual_flash { + SF_SINGLE_FLASH = 0, + SF_DUAL_STACKED_FLASH = 1 << 0, + SF_DUAL_PARALLEL_FLASH = 1 << 1, +}; + +/* Enum list - Full read commands */ +enum spi_read_cmds { + ARRAY_SLOW = 1 << 0, + DUAL_OUTPUT_FAST = 1 << 1, + DUAL_IO_FAST = 1 << 2, + QUAD_OUTPUT_FAST = 1 << 3, + QUAD_IO_FAST = 1 << 4, +}; + +#define RD_EXTN (ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST) +#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST) + +/* sf param flags */ +enum { + SECT_4K = 1 << 0, + SECT_32K = 1 << 1, + E_FSR = 1 << 2, + WR_QPP = 1 << 3, +}; + #define SPI_FLASH_3B_ADDR_LEN 3 #define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) #define SPI_FLASH_16MB_BOUN 0x1000000 @@ -30,12 +60,12 @@ #define CMD_WRITE_STATUS 0x01 #define CMD_PAGE_PROGRAM 0x02 #define CMD_WRITE_DISABLE 0x04 -#define CMD_READ_STATUS 0x05 +#define CMD_READ_STATUS 0x05 #define CMD_QUAD_PAGE_PROGRAM 0x32 #define CMD_READ_STATUS1 0x35 #define CMD_WRITE_ENABLE 0x06 -#define CMD_READ_CONFIG 0x35 -#define CMD_FLAG_STATUS 0x70 +#define CMD_READ_CONFIG 0x35 +#define CMD_FLAG_STATUS 0x70 /* Read commands */ #define CMD_READ_ARRAY_SLOW 0x03 @@ -57,7 +87,7 @@ /* Common status */ #define STATUS_WIP (1 << 0) #define STATUS_QEB_WINSPAN (1 << 1) -#define STATUS_QEB_MXIC (1 << 6) +#define STATUS_QEB_MXIC (1 << 6) #define STATUS_PEC (1 << 7) #ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN @@ -66,19 +96,42 @@ /* Flash timeout values */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) -#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) +#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) /* SST specific */ #ifdef CONFIG_SPI_FLASH_SST -# define SST_WP 0x01 /* Supports AAI word program */ +# define SST_WP 0x01 /* Supports AAI word program */ # define CMD_SST_BP 0x02 /* Byte Program */ -# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ +# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf); #endif +/** + * struct spi_flash_params - SPI/QSPI flash device params structure + * + * @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) + * @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id]) + * @ext_jedec: Device ext_jedec ID + * @sector_size: Sector size of this device + * @nr_sectors: No.of sectors on this device + * @e_rd_cmd: Enum list for read commands + * @flags: Important param, for flash specific behaviour + */ +struct spi_flash_params { + const char *name; + u32 jedec; + u16 ext_jedec; + u32 sector_size; + u32 nr_sectors; + u8 e_rd_cmd; + u16 flags; +}; + +extern const struct spi_flash_params spi_flash_params_table[]; + /* Send a single-byte command to the device and read the response */ int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 453edf0149..61545cacaa 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <spi.h> #include <spi_flash.h> #include "sf_internal.h" diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 4d148d1ace..26364269be 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -9,6 +9,8 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <fdtdec.h> #include <malloc.h> #include <spi.h> @@ -95,15 +97,15 @@ static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) } } -static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, - u8 *idcode) +static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, + struct spi_flash *flash) { const struct spi_flash_params *params; - struct spi_flash *flash; u8 cmd; u16 jedec = idcode[1] << 8 | idcode[2]; u16 ext_jedec = idcode[3] << 8 | idcode[4]; + /* Validate params from spi_flash_params table */ params = spi_flash_params_table; for (; params->name != NULL; params++) { if ((params->jedec >> 16) == idcode[0]) { @@ -120,13 +122,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, printf("SF: Unsupported flash IDs: "); printf("manuf %02x, jedec %04x, ext_jedec %04x\n", idcode[0], jedec, ext_jedec); - return NULL; - } - - flash = calloc(1, sizeof(*flash)); - if (!flash) { - debug("SF: Failed to allocate spi_flash\n"); - return NULL; + return -EPROTONOSUPPORT; } /* Assign spi data */ @@ -136,13 +132,15 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, flash->dual_flash = flash->spi->option; /* Assign spi_flash ops */ +#ifndef CONFIG_DM_SPI_FLASH flash->write = spi_flash_cmd_write_ops; -#ifdef CONFIG_SPI_FLASH_SST +#if defined(CONFIG_SPI_FLASH_SST) if (params->flags & SST_WP) flash->write = sst_write_wp; #endif flash->erase = spi_flash_cmd_erase_ops; flash->read = spi_flash_cmd_read_ops; +#endif /* Compute the flash size */ flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0; @@ -227,15 +225,18 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, #ifdef CONFIG_SPI_FLASH_BAR u8 curr_bank = 0; if (flash->size > SPI_FLASH_16MB_BOUN) { + int ret; + flash->bank_read_cmd = (idcode[0] == 0x01) ? CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR; flash->bank_write_cmd = (idcode[0] == 0x01) ? CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR; - if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1, - &curr_bank, 1)) { + ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1, + &curr_bank, 1); + if (ret) { debug("SF: fail to read bank addr register\n"); - return NULL; + return ret; } flash->bank_curr = curr_bank; } else { @@ -250,7 +251,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, spi_flash_cmd_write_status(flash, 0); #endif - return flash; + return 0; } #ifdef CONFIG_OF_CONTROL @@ -309,23 +310,29 @@ static int spi_enable_wp_pin(struct spi_flash *flash) } #endif -static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) +/** + * spi_flash_probe_slave() - Probe for a SPI flash device on a bus + * + * @spi: Bus to probe + * @flashp: Pointer to place to put flash info, which may be NULL if the + * space should be allocated + */ +int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash) { - struct spi_flash *flash = NULL; u8 idcode[5]; int ret; /* Setup spi_slave */ if (!spi) { printf("SF: Failed to set up slave\n"); - return NULL; + return -ENODEV; } /* Claim spi bus */ ret = spi_claim_bus(spi); if (ret) { debug("SF: Failed to claim SPI bus: %d\n", ret); - goto err_claim_bus; + return ret; } /* Read the ID codes */ @@ -340,10 +347,10 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) print_buffer(0, idcode, 1, sizeof(idcode), 0); #endif - /* Validate params from spi_flash_params table */ - flash = spi_flash_validate_params(spi, idcode); - if (!flash) + if (spi_flash_validate_params(spi, idcode, flash)) { + ret = -EINVAL; goto err_read_id; + } /* Set the quad enable bit - only for quad commands */ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || @@ -351,13 +358,15 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { if (spi_flash_set_qeb(flash, idcode[0])) { debug("SF: Fail to set QEB for %02x\n", idcode[0]); - return NULL; + ret = -EINVAL; + goto err_read_id; } } #ifdef CONFIG_OF_CONTROL if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { debug("SF: FDT decode error\n"); + ret = -EINVAL; goto err_read_id; } #endif @@ -385,32 +394,51 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) /* Release spi bus */ spi_release_bus(spi); - return flash; + return 0; err_read_id: spi_release_bus(spi); -err_claim_bus: - spi_free_slave(spi); - return NULL; + return ret; } -struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, +#ifndef CONFIG_DM_SPI_FLASH +struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus) +{ + struct spi_flash *flash; + + /* Allocate space if needed (not used by sf-uclass */ + flash = calloc(1, sizeof(*flash)); + if (!flash) { + debug("SF: Failed to allocate spi_flash\n"); + return NULL; + } + + if (spi_flash_probe_slave(bus, flash)) { + spi_free_slave(bus); + free(flash); + return NULL; + } + + return flash; +} + +struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs, unsigned int max_hz, unsigned int spi_mode) { - struct spi_slave *spi; + struct spi_slave *bus; - spi = spi_setup_slave(bus, cs, max_hz, spi_mode); - return spi_flash_probe_slave(spi); + bus = spi_setup_slave(busnum, cs, max_hz, spi_mode); + return spi_flash_probe_tail(bus); } #ifdef CONFIG_OF_SPI_FLASH struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, int spi_node) { - struct spi_slave *spi; + struct spi_slave *bus; - spi = spi_setup_slave_fdt(blob, slave_node, spi_node); - return spi_flash_probe_slave(spi); + bus = spi_setup_slave_fdt(blob, slave_node, spi_node); + return spi_flash_probe_tail(bus); } #endif @@ -419,3 +447,61 @@ void spi_flash_free(struct spi_flash *flash) spi_free_slave(flash->spi); free(flash); } + +#else /* defined CONFIG_DM_SPI_FLASH */ + +static int spi_flash_std_read(struct udevice *dev, u32 offset, size_t len, + void *buf) +{ + struct spi_flash *flash = dev->uclass_priv; + + return spi_flash_cmd_read_ops(flash, offset, len, buf); +} + +int spi_flash_std_write(struct udevice *dev, u32 offset, size_t len, + const void *buf) +{ + struct spi_flash *flash = dev->uclass_priv; + + return spi_flash_cmd_write_ops(flash, offset, len, buf); +} + +int spi_flash_std_erase(struct udevice *dev, u32 offset, size_t len) +{ + struct spi_flash *flash = dev->uclass_priv; + + return spi_flash_cmd_erase_ops(flash, offset, len); +} + +int spi_flash_std_probe(struct udevice *dev) +{ + struct spi_slave *slave = dev_get_parentdata(dev); + struct spi_flash *flash; + + flash = dev->uclass_priv; + flash->dev = dev; + debug("%s: slave=%p, cs=%d\n", __func__, slave, slave->cs); + return spi_flash_probe_slave(slave, flash); +} + +static const struct dm_spi_flash_ops spi_flash_std_ops = { + .read = spi_flash_std_read, + .write = spi_flash_std_write, + .erase = spi_flash_std_erase, +}; + +static const struct udevice_id spi_flash_std_ids[] = { + { .compatible = "spi-flash" }, + { } +}; + +U_BOOT_DRIVER(spi_flash_std) = { + .name = "spi_flash_std", + .id = UCLASS_SPI_FLASH, + .of_match = spi_flash_std_ids, + .probe = spi_flash_std_probe, + .priv_auto_alloc_size = sizeof(struct spi_flash), + .ops = &spi_flash_std_ops, +}; + +#endif /* CONFIG_DM_SPI_FLASH */ diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 59cca0f4d9..2e0c871219 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <spi.h> #include <spi_flash.h> #include <spl.h> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 2c4dd7cb6a..fb0cf8c1cf 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o obj-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o obj-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o obj-$(CONFIG_MVGBE) += mvgbe.o +obj-$(CONFIG_MVNETA) += mvneta.o obj-$(CONFIG_NATSEMI) += natsemi.o obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 439f8ae99e..08bc1afcf6 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -27,6 +27,7 @@ #include <net.h> #include <miiphy.h> #include <malloc.h> +#include <netdev.h> #include <linux/compiler.h> #include <asm/arch/emac_defs.h> #include <asm/io.h> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 549d648613..b57247032f 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -11,6 +11,7 @@ #include <common.h> #include <malloc.h> #include <net.h> +#include <netdev.h> #include <miiphy.h> #include "fec_mxc.h" @@ -179,13 +180,14 @@ static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr, return 0; } -int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr, int regAddr) +static int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr, + int regAddr) { return fec_mdio_read(bus->priv, phyAddr, regAddr); } -int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr, int regAddr, - u16 data) +static int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr, + int regAddr, u16 data) { return fec_mdio_write(bus->priv, phyAddr, regAddr, data); } diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index d22b722bc5..c8681d0223 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -10,15 +10,16 @@ #include <command.h> #include <net.h> +#include <phy.h> +#include <errno.h> #include <miiphy.h> #include <malloc.h> -#include <asm/arch/emac_defs.h> -#include <asm/arch/psc_defs.h> -#include <asm/arch/keystone_nav.h> - -unsigned int emac_dbg; +#include <asm/ti-common/keystone_nav.h> +#include <asm/ti-common/keystone_net.h> +#include <asm/ti-common/keystone_serdes.h> unsigned int emac_open; +static struct mii_dev *mdio_bus; static unsigned int sys_has_mdio = 1; #ifdef KEYSTONE2_EMAC_GIG_ENABLE @@ -30,6 +31,7 @@ static unsigned int sys_has_mdio = 1; #define RX_BUFF_NUMS 24 #define RX_BUFF_LEN 1520 #define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN +#define SGMII_ANEG_TIMEOUT 4000 static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16); @@ -40,15 +42,7 @@ struct rx_buff_desc net_rx_buffs = { .rx_flow = 22, }; -static void keystone2_eth_mdio_enable(void); - -static int gen_get_link_speed(int phy_addr); - -/* EMAC Addresses */ -static volatile struct emac_regs *adap_emac = - (struct emac_regs *)EMAC_EMACSL_BASE_ADDR; -static volatile struct mdio_regs *adap_mdio = - (struct mdio_regs *)EMAC_MDIO_BASE_ADDR; +static void keystone2_net_serdes_setup(void); int keystone2_eth_read_mac_addr(struct eth_device *dev) { @@ -74,64 +68,67 @@ int keystone2_eth_read_mac_addr(struct eth_device *dev) return 0; } -static void keystone2_eth_mdio_enable(void) +/* MDIO */ + +static int keystone2_mdio_reset(struct mii_dev *bus) { - u_int32_t clkdiv; + u_int32_t clkdiv; + struct mdio_regs *adap_mdio = bus->priv; clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; - writel((clkdiv & 0xffff) | - MDIO_CONTROL_ENABLE | - MDIO_CONTROL_FAULT | - MDIO_CONTROL_FAULT_ENABLE, + writel((clkdiv & 0xffff) | MDIO_CONTROL_ENABLE | + MDIO_CONTROL_FAULT | MDIO_CONTROL_FAULT_ENABLE, &adap_mdio->control); while (readl(&adap_mdio->control) & MDIO_CONTROL_IDLE) ; + + return 0; } -/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ -int keystone2_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) +/** + * keystone2_mdio_read - read a PHY register via MDIO interface. + * Blocks until operation is complete. + */ +static int keystone2_mdio_read(struct mii_dev *bus, + int addr, int devad, int reg) { - int tmp; + int tmp; + struct mdio_regs *adap_mdio = bus->priv; while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) ; - writel(MDIO_USERACCESS0_GO | - MDIO_USERACCESS0_WRITE_READ | - ((reg_num & 0x1f) << 21) | - ((phy_addr & 0x1f) << 16), + writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_READ | + ((reg & 0x1f) << 21) | ((addr & 0x1f) << 16), &adap_mdio->useraccess0); /* Wait for command to complete */ while ((tmp = readl(&adap_mdio->useraccess0)) & MDIO_USERACCESS0_GO) ; - if (tmp & MDIO_USERACCESS0_ACK) { - *data = tmp & 0xffff; - return 0; - } + if (tmp & MDIO_USERACCESS0_ACK) + return tmp & 0xffff; - *data = -1; return -1; } -/* - * Write to a PHY register via MDIO inteface. +/** + * keystone2_mdio_write - write to a PHY register via MDIO interface. * Blocks until operation is complete. */ -int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) +static int keystone2_mdio_write(struct mii_dev *bus, + int addr, int devad, int reg, u16 val) { + struct mdio_regs *adap_mdio = bus->priv; + while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) ; - writel(MDIO_USERACCESS0_GO | - MDIO_USERACCESS0_WRITE_WRITE | - ((reg_num & 0x1f) << 21) | - ((phy_addr & 0x1f) << 16) | - (data & 0xffff), - &adap_mdio->useraccess0); + writel(MDIO_USERACCESS0_GO | MDIO_USERACCESS0_WRITE_WRITE | + ((reg & 0x1f) << 21) | ((addr & 0x1f) << 16) | + (val & 0xffff), &adap_mdio->useraccess0); /* Wait for command to complete */ while (readl(&adap_mdio->useraccess0) & MDIO_USERACCESS0_GO) @@ -140,19 +137,6 @@ int keystone2_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) return 0; } -/* PHY functions for a generic PHY */ -static int gen_get_link_speed(int phy_addr) -{ - u_int16_t tmp; - - if ((!keystone2_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp)) && - (tmp & 0x04)) { - return 0; - } - - return -1; -} - static void __attribute__((unused)) keystone2_eth_gigabit_enable(struct eth_device *dev) { @@ -160,8 +144,10 @@ static void __attribute__((unused)) struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; if (sys_has_mdio) { - if (keystone2_eth_phy_read(eth_priv->phy_addr, 0, &data) || - !(data & (1 << 6))) /* speed selection MSB */ + data = keystone2_mdio_read(mdio_bus, eth_priv->phy_addr, + MDIO_DEVAD_NONE, 0); + /* speed selection MSB */ + if (!(data & (1 << 6))) return; } @@ -169,10 +155,10 @@ static void __attribute__((unused)) * Check if link detected is giga-bit * If Gigabit mode detected, enable gigbit in MAC */ - writel(readl(&(adap_emac[eth_priv->slave_port - 1].maccontrol)) | + writel(readl(DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + + CPGMACSL_REG_CTL) | EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE, - &(adap_emac[eth_priv->slave_port - 1].maccontrol)) - ; + DEVICE_EMACSL_BASE(eth_priv->slave_port - 1) + CPGMACSL_REG_CTL); } int keystone_sgmii_link_status(int port) @@ -181,38 +167,11 @@ int keystone_sgmii_link_status(int port) status = __raw_readl(SGMII_STATUS_REG(port)); - return status & SGMII_REG_STATUS_LINK; + return (status & SGMII_REG_STATUS_LOCK) && + (status & SGMII_REG_STATUS_LINK); } - -int keystone_get_link_status(struct eth_device *dev) -{ - struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; - int sgmii_link; - int link_state = 0; -#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1 - int j; - - for (j = 0; (j < CONFIG_GET_LINK_STATUS_ATTEMPTS) && (link_state == 0); - j++) { -#endif - sgmii_link = - keystone_sgmii_link_status(eth_priv->slave_port - 1); - - if (sgmii_link) { - link_state = 1; - - if (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) - if (gen_get_link_speed(eth_priv->phy_addr)) - link_state = 0; - } -#if CONFIG_GET_LINK_STATUS_ATTEMPTS > 1 - } -#endif - return link_state; -} - -int keystone_sgmii_config(int port, int interface) +int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface) { unsigned int i, status, mask; unsigned int mr_adv_ability, control; @@ -273,11 +232,35 @@ int keystone_sgmii_config(int port, int interface) if (control & SGMII_REG_CONTROL_AUTONEG) mask |= SGMII_REG_STATUS_AUTONEG; - for (i = 0; i < 1000; i++) { + status = __raw_readl(SGMII_STATUS_REG(port)); + if ((status & mask) == mask) + return 0; + + printf("\n%s Waiting for SGMII auto negotiation to complete", + phy_dev->dev->name); + while ((status & mask) != mask) { + /* + * Timeout reached ? + */ + if (i > SGMII_ANEG_TIMEOUT) { + puts(" TIMEOUT !\n"); + phy_dev->link = 0; + return 0; + } + + if (ctrlc()) { + puts("user interrupt!\n"); + phy_dev->link = 0; + return -EINTR; + } + + if ((i++ % 500) == 0) + printf("."); + + udelay(1000); /* 1 ms */ status = __raw_readl(SGMII_STATUS_REG(port)); - if ((status & mask) == mask) - break; } + puts(" done\n"); return 0; } @@ -332,6 +315,11 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); +#ifdef CONFIG_K2E_EVM + /* Map RX packet flow priority to 0 */ + writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); +#endif + return ret; } @@ -393,15 +381,15 @@ int32_t cpmac_drv_send(u32 *buffer, int num_bytes, int slave_port_num) if (num_bytes < EMAC_MIN_ETHERNET_PKT_SIZE) num_bytes = EMAC_MIN_ETHERNET_PKT_SIZE; - return netcp_send(buffer, num_bytes, (slave_port_num) << 16); + return ksnav_send(&netcp_pktdma, buffer, + num_bytes, (slave_port_num) << 16); } /* Eth device open */ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) { - u_int32_t clkdiv; - int link; struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + struct phy_device *phy_dev = eth_priv->phy_dev; debug("+ emac_open\n"); @@ -410,15 +398,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) sys_has_mdio = (eth_priv->sgmii_link_type == SGMII_LINK_MAC_PHY) ? 1 : 0; - psc_enable_module(KS2_LPSC_PA); - psc_enable_module(KS2_LPSC_CPGMAC); - - sgmii_serdes_setup_156p25mhz(); - - if (sys_has_mdio) - keystone2_eth_mdio_enable(); + keystone2_net_serdes_setup(); - keystone_sgmii_config(eth_priv->slave_port - 1, + keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1, eth_priv->sgmii_link_type); udelay(10000); @@ -431,7 +413,7 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) printf("ERROR: qm_init()\n"); return -1; } - if (netcp_init(&net_rx_buffs)) { + if (ksnav_init(&netcp_pktdma, &net_rx_buffs)) { qm_close(); printf("ERROR: netcp_init()\n"); return -1; @@ -445,18 +427,11 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) hw_config_streaming_switch(); if (sys_has_mdio) { - /* Init MDIO & get link state */ - clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; - writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | - MDIO_CONTROL_FAULT, &adap_mdio->control) - ; - - /* We need to wait for MDIO to start */ - udelay(1000); - - link = keystone_get_link_status(dev); - if (link == 0) { - netcp_close(); + keystone2_mdio_reset(mdio_bus); + + phy_startup(phy_dev); + if (phy_dev->link == 0) { + ksnav_close(&netcp_pktdma); qm_close(); return -1; } @@ -476,6 +451,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) /* Eth device close */ void keystone2_eth_close(struct eth_device *dev) { + struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + struct phy_device *phy_dev = eth_priv->phy_dev; + debug("+ emac_close\n"); if (!emac_open) @@ -483,16 +461,15 @@ void keystone2_eth_close(struct eth_device *dev) ethss_stop(); - netcp_close(); + ksnav_close(&netcp_pktdma); qm_close(); + phy_shutdown(phy_dev); emac_open = 0; debug("- emac_close\n"); } -static int tx_send_loop; - /* * This function sends a single packet on the network and returns * positive number (number of bytes transmitted) or negative for error @@ -502,22 +479,15 @@ static int keystone2_eth_send_packet(struct eth_device *dev, { int ret_status = -1; struct eth_priv_t *eth_priv = (struct eth_priv_t *)dev->priv; + struct phy_device *phy_dev = eth_priv->phy_dev; - tx_send_loop = 0; - - if (keystone_get_link_status(dev) == 0) + genphy_update_link(phy_dev); + if (phy_dev->link == 0) return -1; - emac_gigabit_enable(dev); - if (cpmac_drv_send((u32 *)packet, length, eth_priv->slave_port) != 0) return ret_status; - if (keystone_get_link_status(dev) == 0) - return -1; - - emac_gigabit_enable(dev); - return length; } @@ -530,13 +500,13 @@ static int keystone2_eth_rcv_packet(struct eth_device *dev) int pkt_size; u32 *pkt; - hd = netcp_recv(&pkt, &pkt_size); + hd = ksnav_recv(&netcp_pktdma, &pkt, &pkt_size); if (hd == NULL) return 0; NetReceive((uchar *)pkt, pkt_size); - netcp_release_rxhd(hd); + ksnav_release_rxhd(&netcp_pktdma, hd); return pkt_size; } @@ -546,7 +516,9 @@ static int keystone2_eth_rcv_packet(struct eth_device *dev) */ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) { + int res; struct eth_device *dev; + struct phy_device *phy_dev; dev = malloc(sizeof(struct eth_device)); if (dev == NULL) @@ -567,145 +539,55 @@ int keystone2_emac_initialize(struct eth_priv_t *eth_priv) eth_register(dev); - return 0; -} - -void sgmii_serdes_setup_156p25mhz(void) -{ - unsigned int cnt; - - /* - * configure Serializer/Deserializer (SerDes) hardware. SerDes IP - * hardware vendor published only register addresses and their values - * to be used for configuring SerDes. So had to use hardcoded values - * below. - */ - clrsetbits_le32(0x0232a000, 0xffff0000, 0x00800000); - clrsetbits_le32(0x0232a014, 0x0000ffff, 0x00008282); - clrsetbits_le32(0x0232a060, 0x00ffffff, 0x00142438); - clrsetbits_le32(0x0232a064, 0x00ffff00, 0x00c3c700); - clrsetbits_le32(0x0232a078, 0x0000ff00, 0x0000c000); - - clrsetbits_le32(0x0232a204, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a208, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a20c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a210, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a214, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a218, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a2ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a22c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a280, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a284, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a404, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a408, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a40c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a410, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a414, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a418, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a4ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a42c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a480, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a484, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a604, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a608, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a60c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a610, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a614, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a618, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a6ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a62c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a680, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a684, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232a804, 0xff0000ff, 0x38000080); - clrsetbits_le32(0x0232a808, 0x000000ff, 0x00000000); - clrsetbits_le32(0x0232a80c, 0xff000000, 0x02000000); - clrsetbits_le32(0x0232a810, 0xff000000, 0x1b000000); - clrsetbits_le32(0x0232a814, 0x0000ffff, 0x00006fb8); - clrsetbits_le32(0x0232a818, 0xffff00ff, 0x758000e4); - clrsetbits_le32(0x0232a8ac, 0x0000ff00, 0x00004400); - clrsetbits_le32(0x0232a82c, 0x00ffff00, 0x00200800); - clrsetbits_le32(0x0232a880, 0x00ff00ff, 0x00820082); - clrsetbits_le32(0x0232a884, 0xffffffff, 0x1d0f0385); - - clrsetbits_le32(0x0232aa00, 0x0000ff00, 0x00000800); - clrsetbits_le32(0x0232aa08, 0xffff0000, 0x38a20000); - clrsetbits_le32(0x0232aa30, 0x00ffff00, 0x008a8a00); - clrsetbits_le32(0x0232aa84, 0x0000ff00, 0x00000600); - clrsetbits_le32(0x0232aa94, 0xff000000, 0x10000000); - clrsetbits_le32(0x0232aaa0, 0xff000000, 0x81000000); - clrsetbits_le32(0x0232aabc, 0xff000000, 0xff000000); - clrsetbits_le32(0x0232aac0, 0x000000ff, 0x0000008b); - clrsetbits_le32(0x0232ab08, 0xffff0000, 0x583f0000); - clrsetbits_le32(0x0232ab0c, 0x000000ff, 0x0000004e); - clrsetbits_le32(0x0232a000, 0x000000ff, 0x00000003); - clrsetbits_le32(0x0232aa00, 0x000000ff, 0x0000005f); - - clrsetbits_le32(0x0232aa48, 0x00ffff00, 0x00fd8c00); - clrsetbits_le32(0x0232aa54, 0x00ffffff, 0x002fec72); - clrsetbits_le32(0x0232aa58, 0xffffff00, 0x00f92100); - clrsetbits_le32(0x0232aa5c, 0xffffffff, 0x00040060); - clrsetbits_le32(0x0232aa60, 0xffffffff, 0x00008000); - clrsetbits_le32(0x0232aa64, 0xffffffff, 0x0c581220); - clrsetbits_le32(0x0232aa68, 0xffffffff, 0xe13b0602); - clrsetbits_le32(0x0232aa6c, 0xffffffff, 0xb8074cc1); - clrsetbits_le32(0x0232aa70, 0xffffffff, 0x3f02e989); - clrsetbits_le32(0x0232aa74, 0x000000ff, 0x00000001); - clrsetbits_le32(0x0232ab20, 0x00ff0000, 0x00370000); - clrsetbits_le32(0x0232ab1c, 0xff000000, 0x37000000); - clrsetbits_le32(0x0232ab20, 0x000000ff, 0x0000005d); - - /*Bring SerDes out of Reset if SerDes is Shutdown & is in Reset Mode*/ - clrbits_le32(0x0232a010, 1 << 28); - - /* Enable TX and RX via the LANExCTL_STS 0x0000 + x*4 */ - clrbits_le32(0x0232a228, 1 << 29); - writel(0xF800F8C0, 0x0232bfe0); - clrbits_le32(0x0232a428, 1 << 29); - writel(0xF800F8C0, 0x0232bfe4); - clrbits_le32(0x0232a628, 1 << 29); - writel(0xF800F8C0, 0x0232bfe8); - clrbits_le32(0x0232a828, 1 << 29); - writel(0xF800F8C0, 0x0232bfec); - - /*Enable pll via the pll_ctrl 0x0014*/ - writel(0xe0000000, 0x0232bff4) - ; - - /*Waiting for SGMII Serdes PLL lock.*/ - for (cnt = 10000; cnt > 0 && ((readl(0x02090114) & 0x10) == 0); cnt--) - ; - - for (cnt = 10000; cnt > 0 && ((readl(0x02090214) & 0x10) == 0); cnt--) - ; - - for (cnt = 10000; cnt > 0 && ((readl(0x02090414) & 0x10) == 0); cnt--) - ; + /* Register MDIO bus if it's not registered yet */ + if (!mdio_bus) { + mdio_bus = mdio_alloc(); + mdio_bus->read = keystone2_mdio_read; + mdio_bus->write = keystone2_mdio_write; + mdio_bus->reset = keystone2_mdio_reset; + mdio_bus->priv = (void *)EMAC_MDIO_BASE_ADDR; + sprintf(mdio_bus->name, "ethernet-mdio"); + + res = mdio_register(mdio_bus); + if (res) + return res; + } - for (cnt = 10000; cnt > 0 && ((readl(0x02090514) & 0x10) == 0); cnt--) - ; + /* Create phy device and bind it with driver */ +#ifdef CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE + phy_dev = phy_connect(mdio_bus, eth_priv->phy_addr, + dev, PHY_INTERFACE_MODE_SGMII); + phy_config(phy_dev); +#else + phy_dev = phy_find_by_mask(mdio_bus, 1 << eth_priv->phy_addr, + PHY_INTERFACE_MODE_SGMII); + phy_dev->dev = dev; +#endif + eth_priv->phy_dev = phy_dev; - udelay(45000); + return 0; } -void sgmii_serdes_shutdown(void) +struct ks2_serdes ks2_serdes_sgmii_156p25mhz = { + .clk = SERDES_CLOCK_156P25M, + .rate = SERDES_RATE_5G, + .rate_mode = SERDES_QUARTER_RATE, + .intf = SERDES_PHY_SGMII, + .loopback = 0, +}; + +static void keystone2_net_serdes_setup(void) { - /* - * shutdown SerDes hardware. SerDes hardware vendor published only - * register addresses and their values. So had to use hardcoded - * values below. - */ - clrbits_le32(0x0232bfe0, 3 << 29 | 3 << 13); - setbits_le32(0x02320228, 1 << 29); - clrbits_le32(0x0232bfe4, 3 << 29 | 3 << 13); - setbits_le32(0x02320428, 1 << 29); - clrbits_le32(0x0232bfe8, 3 << 29 | 3 << 13); - setbits_le32(0x02320628, 1 << 29); - clrbits_le32(0x0232bfec, 3 << 29 | 3 << 13); - setbits_le32(0x02320828, 1 << 29); - - clrbits_le32(0x02320034, 3 << 29); - setbits_le32(0x02320010, 1 << 28); + ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE, + &ks2_serdes_sgmii_156p25mhz, + CONFIG_KSNET_SERDES_LANES_PER_SGMII); + +#ifdef CONFIG_SOC_K2E + ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE, + &ks2_serdes_sgmii_156p25mhz, + CONFIG_KSNET_SERDES_LANES_PER_SGMII); +#endif + + /* wait till setup */ + udelay(5000); } diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 0cd06b6a69..6ef6cacb6b 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -24,7 +24,7 @@ #include <asm/arch/cpu.h> #if defined(CONFIG_KIRKWOOD) -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #elif defined(CONFIG_ORION5X) #include <asm/arch/orion5x.h> #elif defined(CONFIG_DOVE) diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c new file mode 100644 index 0000000000..a2a69b4219 --- /dev/null +++ b/drivers/net/mvneta.c @@ -0,0 +1,1653 @@ +/* + * Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs. + * + * U-Boot version: + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * Based on the Linux version which is: + * Copyright (C) 2012 Marvell + * + * Rami Rosen <rosenr@marvell.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <net.h> +#include <netdev.h> +#include <config.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <phy.h> +#include <miiphy.h> +#include <watchdog.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <linux/compat.h> +#include <linux/mbus.h> + +#if !defined(CONFIG_PHYLIB) +# error Marvell mvneta requires PHYLIB +#endif + +/* Some linux -> U-Boot compatibility stuff */ +#define netdev_err(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_warn(dev, fmt, args...) \ + printf(fmt, ##args) +#define netdev_info(dev, fmt, args...) \ + printf(fmt, ##args) + +#define CONFIG_NR_CPUS 1 +#define BIT(nr) (1UL << (nr)) +#define ETH_HLEN 14 /* Total octets in header */ + +/* 2(HW hdr) 14(MAC hdr) 4(CRC) 32(extra for cache prefetch) */ +#define WRAP (2 + ETH_HLEN + 4 + 32) +#define MTU 1500 +#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN)) + +#define MVNETA_SMI_TIMEOUT 10000 + +/* Registers */ +#define MVNETA_RXQ_CONFIG_REG(q) (0x1400 + ((q) << 2)) +#define MVNETA_RXQ_HW_BUF_ALLOC BIT(1) +#define MVNETA_RXQ_PKT_OFFSET_ALL_MASK (0xf << 8) +#define MVNETA_RXQ_PKT_OFFSET_MASK(offs) ((offs) << 8) +#define MVNETA_RXQ_THRESHOLD_REG(q) (0x14c0 + ((q) << 2)) +#define MVNETA_RXQ_NON_OCCUPIED(v) ((v) << 16) +#define MVNETA_RXQ_BASE_ADDR_REG(q) (0x1480 + ((q) << 2)) +#define MVNETA_RXQ_SIZE_REG(q) (0x14a0 + ((q) << 2)) +#define MVNETA_RXQ_BUF_SIZE_SHIFT 19 +#define MVNETA_RXQ_BUF_SIZE_MASK (0x1fff << 19) +#define MVNETA_RXQ_STATUS_REG(q) (0x14e0 + ((q) << 2)) +#define MVNETA_RXQ_OCCUPIED_ALL_MASK 0x3fff +#define MVNETA_RXQ_STATUS_UPDATE_REG(q) (0x1500 + ((q) << 2)) +#define MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT 16 +#define MVNETA_RXQ_ADD_NON_OCCUPIED_MAX 255 +#define MVNETA_PORT_RX_RESET 0x1cc0 +#define MVNETA_PORT_RX_DMA_RESET BIT(0) +#define MVNETA_PHY_ADDR 0x2000 +#define MVNETA_PHY_ADDR_MASK 0x1f +#define MVNETA_SMI 0x2004 +#define MVNETA_PHY_REG_MASK 0x1f +/* SMI register fields */ +#define MVNETA_SMI_DATA_OFFS 0 /* Data */ +#define MVNETA_SMI_DATA_MASK (0xffff << MVNETA_SMI_DATA_OFFS) +#define MVNETA_SMI_DEV_ADDR_OFFS 16 /* PHY device address */ +#define MVNETA_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/ +#define MVNETA_SMI_OPCODE_OFFS 26 /* Write/Read opcode */ +#define MVNETA_SMI_OPCODE_READ (1 << MVNETA_SMI_OPCODE_OFFS) +#define MVNETA_SMI_READ_VALID (1 << 27) /* Read Valid */ +#define MVNETA_SMI_BUSY (1 << 28) /* Busy */ +#define MVNETA_MBUS_RETRY 0x2010 +#define MVNETA_UNIT_INTR_CAUSE 0x2080 +#define MVNETA_UNIT_CONTROL 0x20B0 +#define MVNETA_PHY_POLLING_ENABLE BIT(1) +#define MVNETA_WIN_BASE(w) (0x2200 + ((w) << 3)) +#define MVNETA_WIN_SIZE(w) (0x2204 + ((w) << 3)) +#define MVNETA_WIN_REMAP(w) (0x2280 + ((w) << 2)) +#define MVNETA_BASE_ADDR_ENABLE 0x2290 +#define MVNETA_PORT_CONFIG 0x2400 +#define MVNETA_UNI_PROMISC_MODE BIT(0) +#define MVNETA_DEF_RXQ(q) ((q) << 1) +#define MVNETA_DEF_RXQ_ARP(q) ((q) << 4) +#define MVNETA_TX_UNSET_ERR_SUM BIT(12) +#define MVNETA_DEF_RXQ_TCP(q) ((q) << 16) +#define MVNETA_DEF_RXQ_UDP(q) ((q) << 19) +#define MVNETA_DEF_RXQ_BPDU(q) ((q) << 22) +#define MVNETA_RX_CSUM_WITH_PSEUDO_HDR BIT(25) +#define MVNETA_PORT_CONFIG_DEFL_VALUE(q) (MVNETA_DEF_RXQ(q) | \ + MVNETA_DEF_RXQ_ARP(q) | \ + MVNETA_DEF_RXQ_TCP(q) | \ + MVNETA_DEF_RXQ_UDP(q) | \ + MVNETA_DEF_RXQ_BPDU(q) | \ + MVNETA_TX_UNSET_ERR_SUM | \ + MVNETA_RX_CSUM_WITH_PSEUDO_HDR) +#define MVNETA_PORT_CONFIG_EXTEND 0x2404 +#define MVNETA_MAC_ADDR_LOW 0x2414 +#define MVNETA_MAC_ADDR_HIGH 0x2418 +#define MVNETA_SDMA_CONFIG 0x241c +#define MVNETA_SDMA_BRST_SIZE_16 4 +#define MVNETA_RX_BRST_SZ_MASK(burst) ((burst) << 1) +#define MVNETA_RX_NO_DATA_SWAP BIT(4) +#define MVNETA_TX_NO_DATA_SWAP BIT(5) +#define MVNETA_DESC_SWAP BIT(6) +#define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22) +#define MVNETA_PORT_STATUS 0x2444 +#define MVNETA_TX_IN_PRGRS BIT(1) +#define MVNETA_TX_FIFO_EMPTY BIT(8) +#define MVNETA_RX_MIN_FRAME_SIZE 0x247c +#define MVNETA_SERDES_CFG 0x24A0 +#define MVNETA_SGMII_SERDES_PROTO 0x0cc7 +#define MVNETA_QSGMII_SERDES_PROTO 0x0667 +#define MVNETA_TYPE_PRIO 0x24bc +#define MVNETA_FORCE_UNI BIT(21) +#define MVNETA_TXQ_CMD_1 0x24e4 +#define MVNETA_TXQ_CMD 0x2448 +#define MVNETA_TXQ_DISABLE_SHIFT 8 +#define MVNETA_TXQ_ENABLE_MASK 0x000000ff +#define MVNETA_ACC_MODE 0x2500 +#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2)) +#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff +#define MVNETA_CPU_TXQ_ACCESS_ALL_MASK 0x0000ff00 +#define MVNETA_RXQ_TIME_COAL_REG(q) (0x2580 + ((q) << 2)) + +/* Exception Interrupt Port/Queue Cause register */ + +#define MVNETA_INTR_NEW_CAUSE 0x25a0 +#define MVNETA_INTR_NEW_MASK 0x25a4 + +/* bits 0..7 = TXQ SENT, one bit per queue. + * bits 8..15 = RXQ OCCUP, one bit per queue. + * bits 16..23 = RXQ FREE, one bit per queue. + * bit 29 = OLD_REG_SUM, see old reg ? + * bit 30 = TX_ERR_SUM, one bit for 4 ports + * bit 31 = MISC_SUM, one bit for 4 ports + */ +#define MVNETA_TX_INTR_MASK(nr_txqs) (((1 << nr_txqs) - 1) << 0) +#define MVNETA_TX_INTR_MASK_ALL (0xff << 0) +#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8) +#define MVNETA_RX_INTR_MASK_ALL (0xff << 8) + +#define MVNETA_INTR_OLD_CAUSE 0x25a8 +#define MVNETA_INTR_OLD_MASK 0x25ac + +/* Data Path Port/Queue Cause Register */ +#define MVNETA_INTR_MISC_CAUSE 0x25b0 +#define MVNETA_INTR_MISC_MASK 0x25b4 +#define MVNETA_INTR_ENABLE 0x25b8 + +#define MVNETA_RXQ_CMD 0x2680 +#define MVNETA_RXQ_DISABLE_SHIFT 8 +#define MVNETA_RXQ_ENABLE_MASK 0x000000ff +#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4)) +#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4)) +#define MVNETA_GMAC_CTRL_0 0x2c00 +#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2 +#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc +#define MVNETA_GMAC0_PORT_ENABLE BIT(0) +#define MVNETA_GMAC_CTRL_2 0x2c08 +#define MVNETA_GMAC2_PCS_ENABLE BIT(3) +#define MVNETA_GMAC2_PORT_RGMII BIT(4) +#define MVNETA_GMAC2_PORT_RESET BIT(6) +#define MVNETA_GMAC_STATUS 0x2c10 +#define MVNETA_GMAC_LINK_UP BIT(0) +#define MVNETA_GMAC_SPEED_1000 BIT(1) +#define MVNETA_GMAC_SPEED_100 BIT(2) +#define MVNETA_GMAC_FULL_DUPLEX BIT(3) +#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4) +#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5) +#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6) +#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7) +#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c +#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0) +#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1) +#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5) +#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6) +#define MVNETA_GMAC_AN_SPEED_EN BIT(7) +#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) +#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) +#define MVNETA_MIB_COUNTERS_BASE 0x3080 +#define MVNETA_MIB_LATE_COLLISION 0x7c +#define MVNETA_DA_FILT_SPEC_MCAST 0x3400 +#define MVNETA_DA_FILT_OTH_MCAST 0x3500 +#define MVNETA_DA_FILT_UCAST_BASE 0x3600 +#define MVNETA_TXQ_BASE_ADDR_REG(q) (0x3c00 + ((q) << 2)) +#define MVNETA_TXQ_SIZE_REG(q) (0x3c20 + ((q) << 2)) +#define MVNETA_TXQ_SENT_THRESH_ALL_MASK 0x3fff0000 +#define MVNETA_TXQ_SENT_THRESH_MASK(coal) ((coal) << 16) +#define MVNETA_TXQ_UPDATE_REG(q) (0x3c60 + ((q) << 2)) +#define MVNETA_TXQ_DEC_SENT_SHIFT 16 +#define MVNETA_TXQ_STATUS_REG(q) (0x3c40 + ((q) << 2)) +#define MVNETA_TXQ_SENT_DESC_SHIFT 16 +#define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000 +#define MVNETA_PORT_TX_RESET 0x3cf0 +#define MVNETA_PORT_TX_DMA_RESET BIT(0) +#define MVNETA_TX_MTU 0x3e0c +#define MVNETA_TX_TOKEN_SIZE 0x3e14 +#define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff +#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) +#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff + +/* Descriptor ring Macros */ +#define MVNETA_QUEUE_NEXT_DESC(q, index) \ + (((index) < (q)->last_desc) ? ((index) + 1) : 0) + +/* Various constants */ + +/* Coalescing */ +#define MVNETA_TXDONE_COAL_PKTS 16 +#define MVNETA_RX_COAL_PKTS 32 +#define MVNETA_RX_COAL_USEC 100 + +/* The two bytes Marvell header. Either contains a special value used + * by Marvell switches when a specific hardware mode is enabled (not + * supported by this driver) or is filled automatically by zeroes on + * the RX side. Those two bytes being at the front of the Ethernet + * header, they allow to have the IP header aligned on a 4 bytes + * boundary automatically: the hardware skips those two bytes on its + * own. + */ +#define MVNETA_MH_SIZE 2 + +#define MVNETA_VLAN_TAG_LEN 4 + +#define MVNETA_CPU_D_CACHE_LINE_SIZE 32 +#define MVNETA_TX_CSUM_MAX_SIZE 9800 +#define MVNETA_ACC_MODE_EXT 1 + +/* Timeout constants */ +#define MVNETA_TX_DISABLE_TIMEOUT_MSEC 1000 +#define MVNETA_RX_DISABLE_TIMEOUT_MSEC 1000 +#define MVNETA_TX_FIFO_EMPTY_TIMEOUT 10000 + +#define MVNETA_TX_MTU_MAX 0x3ffff + +/* Max number of Rx descriptors */ +#define MVNETA_MAX_RXD 16 + +/* Max number of Tx descriptors */ +#define MVNETA_MAX_TXD 16 + +/* descriptor aligned size */ +#define MVNETA_DESC_ALIGNED_SIZE 32 + +struct mvneta_port { + void __iomem *base; + struct mvneta_rx_queue *rxqs; + struct mvneta_tx_queue *txqs; + + u8 mcast_count[256]; + u16 tx_ring_size; + u16 rx_ring_size; + + phy_interface_t phy_interface; + unsigned int link; + unsigned int duplex; + unsigned int speed; + + int init; + int phyaddr; + struct phy_device *phydev; + struct mii_dev *bus; +}; + +/* The mvneta_tx_desc and mvneta_rx_desc structures describe the + * layout of the transmit and reception DMA descriptors, and their + * layout is therefore defined by the hardware design + */ + +#define MVNETA_TX_L3_OFF_SHIFT 0 +#define MVNETA_TX_IP_HLEN_SHIFT 8 +#define MVNETA_TX_L4_UDP BIT(16) +#define MVNETA_TX_L3_IP6 BIT(17) +#define MVNETA_TXD_IP_CSUM BIT(18) +#define MVNETA_TXD_Z_PAD BIT(19) +#define MVNETA_TXD_L_DESC BIT(20) +#define MVNETA_TXD_F_DESC BIT(21) +#define MVNETA_TXD_FLZ_DESC (MVNETA_TXD_Z_PAD | \ + MVNETA_TXD_L_DESC | \ + MVNETA_TXD_F_DESC) +#define MVNETA_TX_L4_CSUM_FULL BIT(30) +#define MVNETA_TX_L4_CSUM_NOT BIT(31) + +#define MVNETA_RXD_ERR_CRC 0x0 +#define MVNETA_RXD_ERR_SUMMARY BIT(16) +#define MVNETA_RXD_ERR_OVERRUN BIT(17) +#define MVNETA_RXD_ERR_LEN BIT(18) +#define MVNETA_RXD_ERR_RESOURCE (BIT(17) | BIT(18)) +#define MVNETA_RXD_ERR_CODE_MASK (BIT(17) | BIT(18)) +#define MVNETA_RXD_L3_IP4 BIT(25) +#define MVNETA_RXD_FIRST_LAST_DESC (BIT(26) | BIT(27)) +#define MVNETA_RXD_L4_CSUM_OK BIT(30) + +struct mvneta_tx_desc { + u32 command; /* Options used by HW for packet transmitting.*/ + u16 reserverd1; /* csum_l4 (for future use) */ + u16 data_size; /* Data size of transmitted packet in bytes */ + u32 buf_phys_addr; /* Physical addr of transmitted buffer */ + u32 reserved2; /* hw_cmd - (for future use, PMT) */ + u32 reserved3[4]; /* Reserved - (for future use) */ +}; + +struct mvneta_rx_desc { + u32 status; /* Info about received packet */ + u16 reserved1; /* pnc_info - (for future use, PnC) */ + u16 data_size; /* Size of received packet in bytes */ + + u32 buf_phys_addr; /* Physical address of the buffer */ + u32 reserved2; /* pnc_flow_id (for future use, PnC) */ + + u32 buf_cookie; /* cookie for access to RX buffer in rx path */ + u16 reserved3; /* prefetch_cmd, for future use */ + u16 reserved4; /* csum_l4 - (for future use, PnC) */ + + u32 reserved5; /* pnc_extra PnC (for future use, PnC) */ + u32 reserved6; /* hw_cmd (for future use, PnC and HWF) */ +}; + +struct mvneta_tx_queue { + /* Number of this TX queue, in the range 0-7 */ + u8 id; + + /* Number of TX DMA descriptors in the descriptor ring */ + int size; + + /* Index of last TX DMA descriptor that was inserted */ + int txq_put_index; + + /* Index of the TX DMA descriptor to be cleaned up */ + int txq_get_index; + + /* Virtual address of the TX DMA descriptors array */ + struct mvneta_tx_desc *descs; + + /* DMA address of the TX DMA descriptors array */ + dma_addr_t descs_phys; + + /* Index of the last TX DMA descriptor */ + int last_desc; + + /* Index of the next TX DMA descriptor to process */ + int next_desc_to_proc; +}; + +struct mvneta_rx_queue { + /* rx queue number, in the range 0-7 */ + u8 id; + + /* num of rx descriptors in the rx descriptor ring */ + int size; + + /* Virtual address of the RX DMA descriptors array */ + struct mvneta_rx_desc *descs; + + /* DMA address of the RX DMA descriptors array */ + dma_addr_t descs_phys; + + /* Index of the last RX DMA descriptor */ + int last_desc; + + /* Index of the next RX DMA descriptor to process */ + int next_desc_to_proc; +}; + +/* U-Boot doesn't use the queues, so set the number to 1 */ +static int rxq_number = 1; +static int txq_number = 1; +static int rxq_def; + +struct buffer_location { + struct mvneta_tx_desc *tx_descs; + struct mvneta_rx_desc *rx_descs; + u32 rx_buffers; +}; + +/* + * All 4 interfaces use the same global buffer, since only one interface + * can be enabled at once + */ +static struct buffer_location buffer_loc; + +/* + * Page table entries are set to 1MB, or multiples of 1MB + * (not < 1MB). driver uses less bd's so use 1MB bdspace. + */ +#define BD_SPACE (1 << 20) + +/* Utility/helper methods */ + +/* Write helper method */ +static void mvreg_write(struct mvneta_port *pp, u32 offset, u32 data) +{ + writel(data, pp->base + offset); +} + +/* Read helper method */ +static u32 mvreg_read(struct mvneta_port *pp, u32 offset) +{ + return readl(pp->base + offset); +} + +/* Clear all MIB counters */ +static void mvneta_mib_counters_clear(struct mvneta_port *pp) +{ + int i; + + /* Perform dummy reads from MIB counters */ + for (i = 0; i < MVNETA_MIB_LATE_COLLISION; i += 4) + mvreg_read(pp, (MVNETA_MIB_COUNTERS_BASE + i)); +} + +/* Rx descriptors helper methods */ + +/* Checks whether the RX descriptor having this status is both the first + * and the last descriptor for the RX packet. Each RX packet is currently + * received through a single RX descriptor, so not having each RX + * descriptor with its first and last bits set is an error + */ +static int mvneta_rxq_desc_is_first_last(u32 status) +{ + return (status & MVNETA_RXD_FIRST_LAST_DESC) == + MVNETA_RXD_FIRST_LAST_DESC; +} + +/* Add number of descriptors ready to receive new packets */ +static void mvneta_rxq_non_occup_desc_add(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq, + int ndescs) +{ + /* Only MVNETA_RXQ_ADD_NON_OCCUPIED_MAX (255) descriptors can + * be added at once + */ + while (ndescs > MVNETA_RXQ_ADD_NON_OCCUPIED_MAX) { + mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), + (MVNETA_RXQ_ADD_NON_OCCUPIED_MAX << + MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); + ndescs -= MVNETA_RXQ_ADD_NON_OCCUPIED_MAX; + } + + mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), + (ndescs << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT)); +} + +/* Get number of RX descriptors occupied by received packets */ +static int mvneta_rxq_busy_desc_num_get(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq) +{ + u32 val; + + val = mvreg_read(pp, MVNETA_RXQ_STATUS_REG(rxq->id)); + return val & MVNETA_RXQ_OCCUPIED_ALL_MASK; +} + +/* Update num of rx desc called upon return from rx path or + * from mvneta_rxq_drop_pkts(). + */ +static void mvneta_rxq_desc_num_update(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq, + int rx_done, int rx_filled) +{ + u32 val; + + if ((rx_done <= 0xff) && (rx_filled <= 0xff)) { + val = rx_done | + (rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT); + mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); + return; + } + + /* Only 255 descriptors can be added at once */ + while ((rx_done > 0) || (rx_filled > 0)) { + if (rx_done <= 0xff) { + val = rx_done; + rx_done = 0; + } else { + val = 0xff; + rx_done -= 0xff; + } + if (rx_filled <= 0xff) { + val |= rx_filled << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; + rx_filled = 0; + } else { + val |= 0xff << MVNETA_RXQ_ADD_NON_OCCUPIED_SHIFT; + rx_filled -= 0xff; + } + mvreg_write(pp, MVNETA_RXQ_STATUS_UPDATE_REG(rxq->id), val); + } +} + +/* Get pointer to next RX descriptor to be processed by SW */ +static struct mvneta_rx_desc * +mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq) +{ + int rx_desc = rxq->next_desc_to_proc; + + rxq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(rxq, rx_desc); + return rxq->descs + rx_desc; +} + +/* Tx descriptors helper methods */ + +/* Update HW with number of TX descriptors to be sent */ +static void mvneta_txq_pend_desc_add(struct mvneta_port *pp, + struct mvneta_tx_queue *txq, + int pend_desc) +{ + u32 val; + + /* Only 255 descriptors can be added at once ; Assume caller + * process TX desriptors in quanta less than 256 + */ + val = pend_desc; + mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); +} + +/* Get pointer to next TX descriptor to be processed (send) by HW */ +static struct mvneta_tx_desc * +mvneta_txq_next_desc_get(struct mvneta_tx_queue *txq) +{ + int tx_desc = txq->next_desc_to_proc; + + txq->next_desc_to_proc = MVNETA_QUEUE_NEXT_DESC(txq, tx_desc); + return txq->descs + tx_desc; +} + +/* Set rxq buf size */ +static void mvneta_rxq_buf_size_set(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq, + int buf_size) +{ + u32 val; + + val = mvreg_read(pp, MVNETA_RXQ_SIZE_REG(rxq->id)); + + val &= ~MVNETA_RXQ_BUF_SIZE_MASK; + val |= ((buf_size >> 3) << MVNETA_RXQ_BUF_SIZE_SHIFT); + + mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), val); +} + +/* Start the Ethernet port RX and TX activity */ +static void mvneta_port_up(struct mvneta_port *pp) +{ + int queue; + u32 q_map; + + /* Enable all initialized TXs. */ + mvneta_mib_counters_clear(pp); + q_map = 0; + for (queue = 0; queue < txq_number; queue++) { + struct mvneta_tx_queue *txq = &pp->txqs[queue]; + if (txq->descs != NULL) + q_map |= (1 << queue); + } + mvreg_write(pp, MVNETA_TXQ_CMD, q_map); + + /* Enable all initialized RXQs. */ + q_map = 0; + for (queue = 0; queue < rxq_number; queue++) { + struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; + if (rxq->descs != NULL) + q_map |= (1 << queue); + } + mvreg_write(pp, MVNETA_RXQ_CMD, q_map); +} + +/* Stop the Ethernet port activity */ +static void mvneta_port_down(struct mvneta_port *pp) +{ + u32 val; + int count; + + /* Stop Rx port activity. Check port Rx activity. */ + val = mvreg_read(pp, MVNETA_RXQ_CMD) & MVNETA_RXQ_ENABLE_MASK; + + /* Issue stop command for active channels only */ + if (val != 0) + mvreg_write(pp, MVNETA_RXQ_CMD, + val << MVNETA_RXQ_DISABLE_SHIFT); + + /* Wait for all Rx activity to terminate. */ + count = 0; + do { + if (count++ >= MVNETA_RX_DISABLE_TIMEOUT_MSEC) { + netdev_warn(pp->dev, + "TIMEOUT for RX stopped ! rx_queue_cmd: 0x08%x\n", + val); + break; + } + mdelay(1); + + val = mvreg_read(pp, MVNETA_RXQ_CMD); + } while (val & 0xff); + + /* Stop Tx port activity. Check port Tx activity. Issue stop + * command for active channels only + */ + val = (mvreg_read(pp, MVNETA_TXQ_CMD)) & MVNETA_TXQ_ENABLE_MASK; + + if (val != 0) + mvreg_write(pp, MVNETA_TXQ_CMD, + (val << MVNETA_TXQ_DISABLE_SHIFT)); + + /* Wait for all Tx activity to terminate. */ + count = 0; + do { + if (count++ >= MVNETA_TX_DISABLE_TIMEOUT_MSEC) { + netdev_warn(pp->dev, + "TIMEOUT for TX stopped status=0x%08x\n", + val); + break; + } + mdelay(1); + + /* Check TX Command reg that all Txqs are stopped */ + val = mvreg_read(pp, MVNETA_TXQ_CMD); + + } while (val & 0xff); + + /* Double check to verify that TX FIFO is empty */ + count = 0; + do { + if (count++ >= MVNETA_TX_FIFO_EMPTY_TIMEOUT) { + netdev_warn(pp->dev, + "TX FIFO empty timeout status=0x08%x\n", + val); + break; + } + mdelay(1); + + val = mvreg_read(pp, MVNETA_PORT_STATUS); + } while (!(val & MVNETA_TX_FIFO_EMPTY) && + (val & MVNETA_TX_IN_PRGRS)); + + udelay(200); +} + +/* Enable the port by setting the port enable bit of the MAC control register */ +static void mvneta_port_enable(struct mvneta_port *pp) +{ + u32 val; + + /* Enable port */ + val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); + val |= MVNETA_GMAC0_PORT_ENABLE; + mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); +} + +/* Disable the port and wait for about 200 usec before retuning */ +static void mvneta_port_disable(struct mvneta_port *pp) +{ + u32 val; + + /* Reset the Enable bit in the Serial Control Register */ + val = mvreg_read(pp, MVNETA_GMAC_CTRL_0); + val &= ~MVNETA_GMAC0_PORT_ENABLE; + mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); + + udelay(200); +} + +/* Multicast tables methods */ + +/* Set all entries in Unicast MAC Table; queue==-1 means reject all */ +static void mvneta_set_ucast_table(struct mvneta_port *pp, int queue) +{ + int offset; + u32 val; + + if (queue == -1) { + val = 0; + } else { + val = 0x1 | (queue << 1); + val |= (val << 24) | (val << 16) | (val << 8); + } + + for (offset = 0; offset <= 0xc; offset += 4) + mvreg_write(pp, MVNETA_DA_FILT_UCAST_BASE + offset, val); +} + +/* Set all entries in Special Multicast MAC Table; queue==-1 means reject all */ +static void mvneta_set_special_mcast_table(struct mvneta_port *pp, int queue) +{ + int offset; + u32 val; + + if (queue == -1) { + val = 0; + } else { + val = 0x1 | (queue << 1); + val |= (val << 24) | (val << 16) | (val << 8); + } + + for (offset = 0; offset <= 0xfc; offset += 4) + mvreg_write(pp, MVNETA_DA_FILT_SPEC_MCAST + offset, val); +} + +/* Set all entries in Other Multicast MAC Table. queue==-1 means reject all */ +static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue) +{ + int offset; + u32 val; + + if (queue == -1) { + memset(pp->mcast_count, 0, sizeof(pp->mcast_count)); + val = 0; + } else { + memset(pp->mcast_count, 1, sizeof(pp->mcast_count)); + val = 0x1 | (queue << 1); + val |= (val << 24) | (val << 16) | (val << 8); + } + + for (offset = 0; offset <= 0xfc; offset += 4) + mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val); +} + +/* This method sets defaults to the NETA port: + * Clears interrupt Cause and Mask registers. + * Clears all MAC tables. + * Sets defaults to all registers. + * Resets RX and TX descriptor rings. + * Resets PHY. + * This method can be called after mvneta_port_down() to return the port + * settings to defaults. + */ +static void mvneta_defaults_set(struct mvneta_port *pp) +{ + int cpu; + int queue; + u32 val; + + /* Clear all Cause registers */ + mvreg_write(pp, MVNETA_INTR_NEW_CAUSE, 0); + mvreg_write(pp, MVNETA_INTR_OLD_CAUSE, 0); + mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); + + /* Mask all interrupts */ + mvreg_write(pp, MVNETA_INTR_NEW_MASK, 0); + mvreg_write(pp, MVNETA_INTR_OLD_MASK, 0); + mvreg_write(pp, MVNETA_INTR_MISC_MASK, 0); + mvreg_write(pp, MVNETA_INTR_ENABLE, 0); + + /* Enable MBUS Retry bit16 */ + mvreg_write(pp, MVNETA_MBUS_RETRY, 0x20); + + /* Set CPU queue access map - all CPUs have access to all RX + * queues and to all TX queues + */ + for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) + mvreg_write(pp, MVNETA_CPU_MAP(cpu), + (MVNETA_CPU_RXQ_ACCESS_ALL_MASK | + MVNETA_CPU_TXQ_ACCESS_ALL_MASK)); + + /* Reset RX and TX DMAs */ + mvreg_write(pp, MVNETA_PORT_RX_RESET, MVNETA_PORT_RX_DMA_RESET); + mvreg_write(pp, MVNETA_PORT_TX_RESET, MVNETA_PORT_TX_DMA_RESET); + + /* Disable Legacy WRR, Disable EJP, Release from reset */ + mvreg_write(pp, MVNETA_TXQ_CMD_1, 0); + for (queue = 0; queue < txq_number; queue++) { + mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(queue), 0); + mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(queue), 0); + } + + mvreg_write(pp, MVNETA_PORT_TX_RESET, 0); + mvreg_write(pp, MVNETA_PORT_RX_RESET, 0); + + /* Set Port Acceleration Mode */ + val = MVNETA_ACC_MODE_EXT; + mvreg_write(pp, MVNETA_ACC_MODE, val); + + /* Update val of portCfg register accordingly with all RxQueue types */ + val = MVNETA_PORT_CONFIG_DEFL_VALUE(rxq_def); + mvreg_write(pp, MVNETA_PORT_CONFIG, val); + + val = 0; + mvreg_write(pp, MVNETA_PORT_CONFIG_EXTEND, val); + mvreg_write(pp, MVNETA_RX_MIN_FRAME_SIZE, 64); + + /* Build PORT_SDMA_CONFIG_REG */ + val = 0; + + /* Default burst size */ + val |= MVNETA_TX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); + val |= MVNETA_RX_BRST_SZ_MASK(MVNETA_SDMA_BRST_SIZE_16); + val |= MVNETA_RX_NO_DATA_SWAP | MVNETA_TX_NO_DATA_SWAP; + + /* Assign port SDMA configuration */ + mvreg_write(pp, MVNETA_SDMA_CONFIG, val); + + /* Enable PHY polling in hardware for U-Boot */ + val = mvreg_read(pp, MVNETA_UNIT_CONTROL); + val |= MVNETA_PHY_POLLING_ENABLE; + mvreg_write(pp, MVNETA_UNIT_CONTROL, val); + + mvneta_set_ucast_table(pp, -1); + mvneta_set_special_mcast_table(pp, -1); + mvneta_set_other_mcast_table(pp, -1); +} + +/* Set unicast address */ +static void mvneta_set_ucast_addr(struct mvneta_port *pp, u8 last_nibble, + int queue) +{ + unsigned int unicast_reg; + unsigned int tbl_offset; + unsigned int reg_offset; + + /* Locate the Unicast table entry */ + last_nibble = (0xf & last_nibble); + + /* offset from unicast tbl base */ + tbl_offset = (last_nibble / 4) * 4; + + /* offset within the above reg */ + reg_offset = last_nibble % 4; + + unicast_reg = mvreg_read(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset)); + + if (queue == -1) { + /* Clear accepts frame bit at specified unicast DA tbl entry */ + unicast_reg &= ~(0xff << (8 * reg_offset)); + } else { + unicast_reg &= ~(0xff << (8 * reg_offset)); + unicast_reg |= ((0x01 | (queue << 1)) << (8 * reg_offset)); + } + + mvreg_write(pp, (MVNETA_DA_FILT_UCAST_BASE + tbl_offset), unicast_reg); +} + +/* Set mac address */ +static void mvneta_mac_addr_set(struct mvneta_port *pp, unsigned char *addr, + int queue) +{ + unsigned int mac_h; + unsigned int mac_l; + + if (queue != -1) { + mac_l = (addr[4] << 8) | (addr[5]); + mac_h = (addr[0] << 24) | (addr[1] << 16) | + (addr[2] << 8) | (addr[3] << 0); + + mvreg_write(pp, MVNETA_MAC_ADDR_LOW, mac_l); + mvreg_write(pp, MVNETA_MAC_ADDR_HIGH, mac_h); + } + + /* Accept frames of this address */ + mvneta_set_ucast_addr(pp, addr[5], queue); +} + +/* Handle rx descriptor fill by setting buf_cookie and buf_phys_addr */ +static void mvneta_rx_desc_fill(struct mvneta_rx_desc *rx_desc, + u32 phys_addr, u32 cookie) +{ + rx_desc->buf_cookie = cookie; + rx_desc->buf_phys_addr = phys_addr; +} + +/* Decrement sent descriptors counter */ +static void mvneta_txq_sent_desc_dec(struct mvneta_port *pp, + struct mvneta_tx_queue *txq, + int sent_desc) +{ + u32 val; + + /* Only 255 TX descriptors can be updated at once */ + while (sent_desc > 0xff) { + val = 0xff << MVNETA_TXQ_DEC_SENT_SHIFT; + mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); + sent_desc = sent_desc - 0xff; + } + + val = sent_desc << MVNETA_TXQ_DEC_SENT_SHIFT; + mvreg_write(pp, MVNETA_TXQ_UPDATE_REG(txq->id), val); +} + +/* Get number of TX descriptors already sent by HW */ +static int mvneta_txq_sent_desc_num_get(struct mvneta_port *pp, + struct mvneta_tx_queue *txq) +{ + u32 val; + int sent_desc; + + val = mvreg_read(pp, MVNETA_TXQ_STATUS_REG(txq->id)); + sent_desc = (val & MVNETA_TXQ_SENT_DESC_MASK) >> + MVNETA_TXQ_SENT_DESC_SHIFT; + + return sent_desc; +} + +/* Display more error info */ +static void mvneta_rx_error(struct mvneta_port *pp, + struct mvneta_rx_desc *rx_desc) +{ + u32 status = rx_desc->status; + + if (!mvneta_rxq_desc_is_first_last(status)) { + netdev_err(pp->dev, + "bad rx status %08x (buffer oversize), size=%d\n", + status, rx_desc->data_size); + return; + } + + switch (status & MVNETA_RXD_ERR_CODE_MASK) { + case MVNETA_RXD_ERR_CRC: + netdev_err(pp->dev, "bad rx status %08x (crc error), size=%d\n", + status, rx_desc->data_size); + break; + case MVNETA_RXD_ERR_OVERRUN: + netdev_err(pp->dev, "bad rx status %08x (overrun error), size=%d\n", + status, rx_desc->data_size); + break; + case MVNETA_RXD_ERR_LEN: + netdev_err(pp->dev, "bad rx status %08x (max frame length error), size=%d\n", + status, rx_desc->data_size); + break; + case MVNETA_RXD_ERR_RESOURCE: + netdev_err(pp->dev, "bad rx status %08x (resource error), size=%d\n", + status, rx_desc->data_size); + break; + } +} + +static struct mvneta_rx_queue *mvneta_rxq_handle_get(struct mvneta_port *pp, + int rxq) +{ + return &pp->rxqs[rxq]; +} + + +/* Drop packets received by the RXQ and free buffers */ +static void mvneta_rxq_drop_pkts(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq) +{ + int rx_done; + + rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); + if (rx_done) + mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); +} + +/* Handle rxq fill: allocates rxq skbs; called when initializing a port */ +static int mvneta_rxq_fill(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, + int num) +{ + int i; + + for (i = 0; i < num; i++) { + u32 addr; + + /* U-Boot special: Fill in the rx buffer addresses */ + addr = buffer_loc.rx_buffers + (i * RX_BUFFER_SIZE); + mvneta_rx_desc_fill(rxq->descs + i, addr, addr); + } + + /* Add this number of RX descriptors as non occupied (ready to + * get packets) + */ + mvneta_rxq_non_occup_desc_add(pp, rxq, i); + + return 0; +} + +/* Rx/Tx queue initialization/cleanup methods */ + +/* Create a specified RX queue */ +static int mvneta_rxq_init(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq) + +{ + rxq->size = pp->rx_ring_size; + + /* Allocate memory for RX descriptors */ + rxq->descs_phys = (dma_addr_t)rxq->descs; + if (rxq->descs == NULL) + return -ENOMEM; + + rxq->last_desc = rxq->size - 1; + + /* Set Rx descriptors queue starting address */ + mvreg_write(pp, MVNETA_RXQ_BASE_ADDR_REG(rxq->id), rxq->descs_phys); + mvreg_write(pp, MVNETA_RXQ_SIZE_REG(rxq->id), rxq->size); + + /* Fill RXQ with buffers from RX pool */ + mvneta_rxq_buf_size_set(pp, rxq, RX_BUFFER_SIZE); + mvneta_rxq_fill(pp, rxq, rxq->size); + + return 0; +} + +/* Cleanup Rx queue */ +static void mvneta_rxq_deinit(struct mvneta_port *pp, + struct mvneta_rx_queue *rxq) +{ + mvneta_rxq_drop_pkts(pp, rxq); + + rxq->descs = NULL; + rxq->last_desc = 0; + rxq->next_desc_to_proc = 0; + rxq->descs_phys = 0; +} + +/* Create and initialize a tx queue */ +static int mvneta_txq_init(struct mvneta_port *pp, + struct mvneta_tx_queue *txq) +{ + txq->size = pp->tx_ring_size; + + /* Allocate memory for TX descriptors */ + txq->descs_phys = (u32)txq->descs; + if (txq->descs == NULL) + return -ENOMEM; + + txq->last_desc = txq->size - 1; + + /* Set maximum bandwidth for enabled TXQs */ + mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0x03ffffff); + mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0x3fffffff); + + /* Set Tx descriptors queue starting address */ + mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), txq->descs_phys); + mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), txq->size); + + return 0; +} + +/* Free allocated resources when mvneta_txq_init() fails to allocate memory*/ +static void mvneta_txq_deinit(struct mvneta_port *pp, + struct mvneta_tx_queue *txq) +{ + txq->descs = NULL; + txq->last_desc = 0; + txq->next_desc_to_proc = 0; + txq->descs_phys = 0; + + /* Set minimum bandwidth for disabled TXQs */ + mvreg_write(pp, MVETH_TXQ_TOKEN_CFG_REG(txq->id), 0); + mvreg_write(pp, MVETH_TXQ_TOKEN_COUNT_REG(txq->id), 0); + + /* Set Tx descriptors queue starting address and size */ + mvreg_write(pp, MVNETA_TXQ_BASE_ADDR_REG(txq->id), 0); + mvreg_write(pp, MVNETA_TXQ_SIZE_REG(txq->id), 0); +} + +/* Cleanup all Tx queues */ +static void mvneta_cleanup_txqs(struct mvneta_port *pp) +{ + int queue; + + for (queue = 0; queue < txq_number; queue++) + mvneta_txq_deinit(pp, &pp->txqs[queue]); +} + +/* Cleanup all Rx queues */ +static void mvneta_cleanup_rxqs(struct mvneta_port *pp) +{ + int queue; + + for (queue = 0; queue < rxq_number; queue++) + mvneta_rxq_deinit(pp, &pp->rxqs[queue]); +} + + +/* Init all Rx queues */ +static int mvneta_setup_rxqs(struct mvneta_port *pp) +{ + int queue; + + for (queue = 0; queue < rxq_number; queue++) { + int err = mvneta_rxq_init(pp, &pp->rxqs[queue]); + if (err) { + netdev_err(pp->dev, "%s: can't create rxq=%d\n", + __func__, queue); + mvneta_cleanup_rxqs(pp); + return err; + } + } + + return 0; +} + +/* Init all tx queues */ +static int mvneta_setup_txqs(struct mvneta_port *pp) +{ + int queue; + + for (queue = 0; queue < txq_number; queue++) { + int err = mvneta_txq_init(pp, &pp->txqs[queue]); + if (err) { + netdev_err(pp->dev, "%s: can't create txq=%d\n", + __func__, queue); + mvneta_cleanup_txqs(pp); + return err; + } + } + + return 0; +} + +static void mvneta_start_dev(struct mvneta_port *pp) +{ + /* start the Rx/Tx activity */ + mvneta_port_enable(pp); +} + +static void mvneta_adjust_link(struct eth_device *dev) +{ + struct mvneta_port *pp = dev->priv; + struct phy_device *phydev = pp->phydev; + int status_change = 0; + + if (phydev->link) { + if ((pp->speed != phydev->speed) || + (pp->duplex != phydev->duplex)) { + u32 val; + + val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | + MVNETA_GMAC_CONFIG_GMII_SPEED | + MVNETA_GMAC_CONFIG_FULL_DUPLEX | + MVNETA_GMAC_AN_SPEED_EN | + MVNETA_GMAC_AN_DUPLEX_EN); + + if (phydev->duplex) + val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; + + if (phydev->speed == SPEED_1000) + val |= MVNETA_GMAC_CONFIG_GMII_SPEED; + else + val |= MVNETA_GMAC_CONFIG_MII_SPEED; + + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); + + pp->duplex = phydev->duplex; + pp->speed = phydev->speed; + } + } + + if (phydev->link != pp->link) { + if (!phydev->link) { + pp->duplex = -1; + pp->speed = 0; + } + + pp->link = phydev->link; + status_change = 1; + } + + if (status_change) { + if (phydev->link) { + u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + val |= (MVNETA_GMAC_FORCE_LINK_PASS | + MVNETA_GMAC_FORCE_LINK_DOWN); + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); + mvneta_port_up(pp); + } else { + mvneta_port_down(pp); + } + } +} + +static int mvneta_open(struct eth_device *dev) +{ + struct mvneta_port *pp = dev->priv; + int ret; + + ret = mvneta_setup_rxqs(pp); + if (ret) + return ret; + + ret = mvneta_setup_txqs(pp); + if (ret) + return ret; + + mvneta_adjust_link(dev); + + mvneta_start_dev(pp); + + return 0; +} + +/* Initialize hw */ +static int mvneta_init(struct mvneta_port *pp) +{ + int queue; + + /* Disable port */ + mvneta_port_disable(pp); + + /* Set port default values */ + mvneta_defaults_set(pp); + + pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue), + GFP_KERNEL); + if (!pp->txqs) + return -ENOMEM; + + /* U-Boot special: use preallocated area */ + pp->txqs[0].descs = buffer_loc.tx_descs; + + /* Initialize TX descriptor rings */ + for (queue = 0; queue < txq_number; queue++) { + struct mvneta_tx_queue *txq = &pp->txqs[queue]; + txq->id = queue; + txq->size = pp->tx_ring_size; + } + + pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue), + GFP_KERNEL); + if (!pp->rxqs) { + kfree(pp->txqs); + return -ENOMEM; + } + + /* U-Boot special: use preallocated area */ + pp->rxqs[0].descs = buffer_loc.rx_descs; + + /* Create Rx descriptor rings */ + for (queue = 0; queue < rxq_number; queue++) { + struct mvneta_rx_queue *rxq = &pp->rxqs[queue]; + rxq->id = queue; + rxq->size = pp->rx_ring_size; + } + + return 0; +} + +/* platform glue : initialize decoding windows */ +static void mvneta_conf_mbus_windows(struct mvneta_port *pp) +{ + const struct mbus_dram_target_info *dram; + u32 win_enable; + u32 win_protect; + int i; + + dram = mvebu_mbus_dram_info(); + for (i = 0; i < 6; i++) { + mvreg_write(pp, MVNETA_WIN_BASE(i), 0); + mvreg_write(pp, MVNETA_WIN_SIZE(i), 0); + + if (i < 4) + mvreg_write(pp, MVNETA_WIN_REMAP(i), 0); + } + + win_enable = 0x3f; + win_protect = 0; + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + mvreg_write(pp, MVNETA_WIN_BASE(i), (cs->base & 0xffff0000) | + (cs->mbus_attr << 8) | dram->mbus_dram_target_id); + + mvreg_write(pp, MVNETA_WIN_SIZE(i), + (cs->size - 1) & 0xffff0000); + + win_enable &= ~(1 << i); + win_protect |= 3 << (2 * i); + } + + mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable); +} + +/* Power up the port */ +static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode) +{ + u32 ctrl; + + /* MAC Cause register should be cleared */ + mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0); + + ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2); + + /* Even though it might look weird, when we're configured in + * SGMII or QSGMII mode, the RGMII bit needs to be set. + */ + switch (phy_mode) { + case PHY_INTERFACE_MODE_QSGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_SGMII: + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); + ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + ctrl |= MVNETA_GMAC2_PORT_RGMII; + break; + default: + return -EINVAL; + } + + /* Cancel Port Reset */ + ctrl &= ~MVNETA_GMAC2_PORT_RESET; + mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl); + + while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) & + MVNETA_GMAC2_PORT_RESET) != 0) + continue; + + return 0; +} + +/* Device initialization routine */ +static int mvneta_probe(struct eth_device *dev) +{ + struct mvneta_port *pp = dev->priv; + int err; + + pp->tx_ring_size = MVNETA_MAX_TXD; + pp->rx_ring_size = MVNETA_MAX_RXD; + + err = mvneta_init(pp); + if (err < 0) { + dev_err(&pdev->dev, "can't init eth hal\n"); + return err; + } + + mvneta_conf_mbus_windows(pp); + + mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def); + + err = mvneta_port_power_up(pp, pp->phy_interface); + if (err < 0) { + dev_err(&pdev->dev, "can't power up port\n"); + return err; + } + + /* Call open() now as it needs to be done before runing send() */ + mvneta_open(dev); + + return 0; +} + +/* U-Boot only functions follow here */ + +/* SMI / MDIO functions */ + +static int smi_wait_ready(struct mvneta_port *pp) +{ + u32 timeout = MVNETA_SMI_TIMEOUT; + u32 smi_reg; + + /* wait till the SMI is not busy */ + do { + /* read smi register */ + smi_reg = mvreg_read(pp, MVNETA_SMI); + if (timeout-- == 0) { + printf("Error: SMI busy timeout\n"); + return -EFAULT; + } + } while (smi_reg & MVNETA_SMI_BUSY); + + return 0; +} + +/* + * smi_reg_read - miiphy_read callback function. + * + * Returns 16bit phy register value, or 0xffff on error + */ +static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct mvneta_port *pp = dev->priv; + u32 smi_reg; + u32 timeout; + + /* check parameters */ + if (phy_adr > MVNETA_PHY_ADDR_MASK) { + printf("Error: Invalid PHY address %d\n", phy_adr); + return -EFAULT; + } + + if (reg_ofs > MVNETA_PHY_REG_MASK) { + printf("Err: Invalid register offset %d\n", reg_ofs); + return -EFAULT; + } + + /* wait till the SMI is not busy */ + if (smi_wait_ready(pp) < 0) + return -EFAULT; + + /* fill the phy address and regiser offset and read opcode */ + smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS) + | MVNETA_SMI_OPCODE_READ; + + /* write the smi register */ + mvreg_write(pp, MVNETA_SMI, smi_reg); + + /*wait till read value is ready */ + timeout = MVNETA_SMI_TIMEOUT; + + do { + /* read smi register */ + smi_reg = mvreg_read(pp, MVNETA_SMI); + if (timeout-- == 0) { + printf("Err: SMI read ready timeout\n"); + return -EFAULT; + } + } while (!(smi_reg & MVNETA_SMI_READ_VALID)); + + /* Wait for the data to update in the SMI register */ + for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++) + ; + + *data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK); + + return 0; +} + +/* + * smi_reg_write - imiiphy_write callback function. + * + * Returns 0 if write succeed, -EINVAL on bad parameters + * -ETIME on timeout + */ +static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data) +{ + struct eth_device *dev = eth_get_dev_by_name(devname); + struct mvneta_port *pp = dev->priv; + u32 smi_reg; + + /* check parameters */ + if (phy_adr > MVNETA_PHY_ADDR_MASK) { + printf("Error: Invalid PHY address %d\n", phy_adr); + return -EFAULT; + } + + if (reg_ofs > MVNETA_PHY_REG_MASK) { + printf("Err: Invalid register offset %d\n", reg_ofs); + return -EFAULT; + } + + /* wait till the SMI is not busy */ + if (smi_wait_ready(pp) < 0) + return -EFAULT; + + /* fill the phy addr and reg offset and write opcode and data */ + smi_reg = (data << MVNETA_SMI_DATA_OFFS); + smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS) + | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS); + smi_reg &= ~MVNETA_SMI_OPCODE_READ; + + /* write the smi register */ + mvreg_write(pp, MVNETA_SMI, smi_reg); + + return 0; +} + +static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis) +{ + struct mvneta_port *pp = dev->priv; + struct phy_device *phydev; + + mvneta_port_power_up(pp, pp->phy_interface); + + if (!pp->init || pp->link == 0) { + /* Set phy address of the port */ + mvreg_write(pp, MVNETA_PHY_ADDR, pp->phyaddr); + phydev = phy_connect(pp->bus, pp->phyaddr, dev, + pp->phy_interface); + + pp->phydev = phydev; + phy_config(phydev); + phy_startup(phydev); + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return -1; + } + + /* Full init on first call */ + mvneta_probe(dev); + pp->init = 1; + } else { + /* Upon all following calls, this is enough */ + mvneta_port_up(pp); + mvneta_port_enable(pp); + } + + return 0; +} + +static int mvneta_send(struct eth_device *dev, void *ptr, int len) +{ + struct mvneta_port *pp = dev->priv; + struct mvneta_tx_queue *txq = &pp->txqs[0]; + struct mvneta_tx_desc *tx_desc; + int sent_desc; + u32 timeout = 0; + + /* Get a descriptor for the first part of the packet */ + tx_desc = mvneta_txq_next_desc_get(txq); + + tx_desc->buf_phys_addr = (u32)ptr; + tx_desc->data_size = len; + flush_dcache_range((u32)ptr, (u32)ptr + len); + + /* First and Last descriptor */ + tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC; + mvneta_txq_pend_desc_add(pp, txq, 1); + + /* Wait for packet to be sent (queue might help with speed here) */ + sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); + while (!sent_desc) { + if (timeout++ > 10000) { + printf("timeout: packet not sent\n"); + return -1; + } + sent_desc = mvneta_txq_sent_desc_num_get(pp, txq); + } + + /* txDone has increased - hw sent packet */ + mvneta_txq_sent_desc_dec(pp, txq, sent_desc); + return 0; + + return 0; +} + +static int mvneta_recv(struct eth_device *dev) +{ + struct mvneta_port *pp = dev->priv; + int rx_done; + int packets_done; + struct mvneta_rx_queue *rxq; + + /* get rx queue */ + rxq = mvneta_rxq_handle_get(pp, rxq_def); + rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq); + packets_done = rx_done; + + while (packets_done--) { + struct mvneta_rx_desc *rx_desc; + unsigned char *data; + u32 rx_status; + int rx_bytes; + + /* + * No cache invalidation needed here, since the desc's are + * located in a uncached memory region + */ + rx_desc = mvneta_rxq_next_desc_get(rxq); + + rx_status = rx_desc->status; + if (!mvneta_rxq_desc_is_first_last(rx_status) || + (rx_status & MVNETA_RXD_ERR_SUMMARY)) { + mvneta_rx_error(pp, rx_desc); + /* leave the descriptor untouched */ + continue; + } + + /* 2 bytes for marvell header. 4 bytes for crc */ + rx_bytes = rx_desc->data_size - 6; + + /* give packet to stack - skip on first 2 bytes */ + data = (u8 *)rx_desc->buf_cookie + 2; + /* + * No cache invalidation needed here, since the rx_buffer's are + * located in a uncached memory region + */ + NetReceive(data, rx_bytes); + } + + /* Update rxq management counters */ + if (rx_done) + mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done); + + return 0; +} + +static void mvneta_halt(struct eth_device *dev) +{ + struct mvneta_port *pp = dev->priv; + + mvneta_port_down(pp); + mvneta_port_disable(pp); +} + +int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr) +{ + struct eth_device *dev; + struct mvneta_port *pp; + void *bd_space; + + dev = calloc(1, sizeof(*dev)); + if (dev == NULL) + return -ENOMEM; + + pp = calloc(1, sizeof(*pp)); + if (pp == NULL) + return -ENOMEM; + + dev->priv = pp; + + /* + * Allocate buffer area for descs and rx_buffers. This is only + * done once for all interfaces. As only one interface can + * be active. Make this area DMA save by disabling the D-cache + */ + if (!buffer_loc.tx_descs) { + /* Align buffer area for descs and rx_buffers to 1MiB */ + bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); + mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, + DCACHE_OFF); + buffer_loc.tx_descs = (struct mvneta_tx_desc *)bd_space; + buffer_loc.rx_descs = (struct mvneta_rx_desc *) + ((u32)bd_space + + MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc)); + buffer_loc.rx_buffers = (u32) + (bd_space + + MVNETA_MAX_TXD * sizeof(struct mvneta_tx_desc) + + MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc)); + } + + sprintf(dev->name, "neta%d", devnum); + + pp->base = (void __iomem *)base_addr; + dev->iobase = base_addr; + dev->init = mvneta_init_u_boot; + dev->halt = mvneta_halt; + dev->send = mvneta_send; + dev->recv = mvneta_recv; + dev->write_hwaddr = NULL; + + /* + * The PHY interface type is configured via the + * board specific CONFIG_SYS_NETA_INTERFACE_TYPE + * define. + */ + pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE; + + eth_register(dev); + + pp->phyaddr = phy_addr; + miiphy_register(dev->name, smi_reg_read, smi_reg_write); + pp->bus = miiphy_get_dev_by_name(dev->name); + + return 1; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 1d6c14f2ad..467c972243 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -575,7 +575,7 @@ static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, * Description: Reads the ID registers of the PHY at @addr on the * @bus, stores it in @phy_id and returns zero on success. */ -int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; @@ -648,7 +648,7 @@ static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus, if (phydev) return phydev; } - printf("Phy not found\n"); + printf("Phy %d not found\n", ffs(phy_mask) - 1); return phy_device_create(bus, ffs(phy_mask) - 1, 0xffffffff, interface); } @@ -785,16 +785,13 @@ int phy_startup(struct phy_device *phydev) return 0; } -static int __board_phy_config(struct phy_device *phydev) +__weak int board_phy_config(struct phy_device *phydev) { if (phydev->drv->config) return phydev->drv->config(phydev); return 0; } -int board_phy_config(struct phy_device *phydev) - __attribute__((weak, alias("__board_phy_config"))); - int phy_config(struct phy_device *phydev) { /* Invoke an optional board-specific helper */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 28859f3161..60c333e2c0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -572,7 +572,7 @@ const char * pci_class_str(u8 class) } #endif /* CONFIG_CMD_PCI || CONFIG_PCI_SCAN_SHOW */ -int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +__weak int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) { /* * Check if pci device should be skipped in configuration @@ -591,19 +591,15 @@ int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) return 0; } -int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) - __attribute__((weak, alias("__pci_skip_dev"))); #ifdef CONFIG_PCI_SCAN_SHOW -int __pci_print_dev(struct pci_controller *hose, pci_dev_t dev) +__weak int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) { if (dev == PCI_BDF(hose->first_busno, 0, 0)) return 0; return 1; } -int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) - __attribute__((weak, alias("__pci_print_dev"))); #endif /* CONFIG_PCI_SCAN_SHOW */ int pci_hose_scan_bus(struct pci_controller *hose, int bus) diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h index ce7a69bab5..ebddc124c3 100644 --- a/drivers/rtc/mvrtc.h +++ b/drivers/rtc/mvrtc.h @@ -12,7 +12,7 @@ #ifndef _MVRTC_H_ #define _MVRTC_H_ -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <compiler.h> /* RTC registers */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e69de29bb2..a0b6e02b54 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -0,0 +1,12 @@ +config DM_SERIAL + bool "Enable Driver Model for serial drivers" + depends on DM + help + If you want to use driver model for serial drivers, say Y. + To use legacy serial drivers, say N. + +config UNIPHIER_SERIAL + bool "UniPhier on-chip UART support" + depends on ARCH_UNIPHIER && DM_SERIAL + help + Support for the on-chip UARTs on the Panasonic UniPhier platform. diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b4f299bb0e..2c19ebc288 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -7,8 +7,11 @@ ifdef CONFIG_DM_SERIAL obj-y += serial-uclass.o +obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o else obj-y += serial.o +obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o +obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o endif @@ -25,8 +28,6 @@ obj-$(CONFIG_IMX_SERIAL) += serial_imx.o obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o obj-$(CONFIG_MXC_UART) += serial_mxc.o -obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o -obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o obj-$(CONFIG_SA1100_SERIAL) += serial_sa1100.o obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o @@ -40,6 +41,8 @@ obj-$(CONFIG_MXS_AUART) += mxs_auart.o obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o +obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o +obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 63a9ef6844..8f051914f5 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -61,13 +61,13 @@ static void ns16550_writeb(NS16550_t port, int offset, int value) unsigned char *addr; offset *= 1 << plat->reg_shift; - addr = plat->base + offset; + addr = map_sysmem(plat->base, 0) + offset; /* * As far as we know it doesn't make sense to support selection of * these options at run-time, so use the existing CONFIG options. */ #ifdef CONFIG_SYS_NS16550_PORT_MAPPED - outb(value, addr); + outb(value, (ulong)addr); #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) out_le32(addr, value); #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) @@ -85,9 +85,9 @@ static int ns16550_readb(NS16550_t port, int offset) unsigned char *addr; offset *= 1 << plat->reg_shift; - addr = plat->base + offset; + addr = map_sysmem(plat->base, 0) + offset; #ifdef CONFIG_SYS_NS16550_PORT_MAPPED - return inb(addr); + return inb((ulong)addr); #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) return in_le32(addr); #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) @@ -253,7 +253,7 @@ static int ns16550_serial_getc(struct udevice *dev) { struct NS16550 *const com_port = dev_get_priv(dev); - if (!serial_in(&com_port->lsr) & UART_LSR_DR) + if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) return -EAGAIN; return serial_in(&com_port->rbr); @@ -276,14 +276,15 @@ int ns16550_serial_probe(struct udevice *dev) { struct NS16550 *const com_port = dev_get_priv(dev); + com_port->plat = dev_get_platdata(dev); NS16550_init(com_port, -1); return 0; } +#ifdef CONFIG_OF_CONTROL int ns16550_serial_ofdata_to_platdata(struct udevice *dev) { - struct NS16550 *const com_port = dev_get_priv(dev); struct ns16550_platdata *plat = dev->platdata; fdt_addr_t addr; @@ -291,13 +292,13 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL; - plat->base = (unsigned char *)addr; + plat->base = addr; plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg-shift", 1); - com_port->plat = plat; return 0; } +#endif const struct dm_serial_ops ns16550_serial_ops = { .putc = ns16550_serial_putc, diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 6dde4eaf47..71f1a5cb91 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -11,9 +11,12 @@ #include <os.h> #include <serial.h> #include <stdio_dev.h> +#include <watchdog.h> #include <dm/lists.h> #include <dm/device-internal.h> +#include <ns16550.h> + DECLARE_GLOBAL_DATA_PTR; /* The currently-selected console serial device */ @@ -47,13 +50,22 @@ static void serial_find_console_or_panic(void) } #endif /* + * Try to use CONFIG_CONS_INDEX if available (it is numbered from 1!). + * * Failing that, get the device with sequence number 0, or in extremis * just the first serial device we can find. But we insist on having * a console (even if it is silent). */ - if (uclass_get_device_by_seq(UCLASS_SERIAL, 0, &cur_dev) && +#ifdef CONFIG_CONS_INDEX +#define INDEX (CONFIG_CONS_INDEX - 1) +#else +#define INDEX 0 +#endif + if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &cur_dev) && + uclass_get_device(UCLASS_SERIAL, INDEX, &cur_dev) && (uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev)) panic("No serial driver found"); +#undef INDEX } /* Called prior to relocation */ @@ -71,95 +83,98 @@ void serial_initialize(void) serial_find_console_or_panic(); } -void serial_putc(char ch) +static void _serial_putc(struct udevice *dev, char ch) { - struct dm_serial_ops *ops = serial_get_ops(cur_dev); + struct dm_serial_ops *ops = serial_get_ops(dev); int err; do { - err = ops->putc(cur_dev, ch); + err = ops->putc(dev, ch); } while (err == -EAGAIN); if (ch == '\n') - serial_putc('\r'); + _serial_putc(dev, '\r'); } -void serial_setbrg(void) +static void _serial_puts(struct udevice *dev, const char *str) { - struct dm_serial_ops *ops = serial_get_ops(cur_dev); - - if (ops->setbrg) - ops->setbrg(cur_dev, gd->baudrate); + while (*str) + _serial_putc(dev, *str++); } -void serial_puts(const char *str) +static int _serial_getc(struct udevice *dev) { - while (*str) - serial_putc(*str++); + struct dm_serial_ops *ops = serial_get_ops(dev); + int err; + + do { + err = ops->getc(dev); + if (err == -EAGAIN) + WATCHDOG_RESET(); + } while (err == -EAGAIN); + + return err >= 0 ? err : 0; } -int serial_tstc(void) +static int _serial_tstc(struct udevice *dev) { - struct dm_serial_ops *ops = serial_get_ops(cur_dev); + struct dm_serial_ops *ops = serial_get_ops(dev); if (ops->pending) - return ops->pending(cur_dev, true); + return ops->pending(dev, true); return 1; } +void serial_putc(char ch) +{ + _serial_putc(cur_dev, ch); +} + +void serial_puts(const char *str) +{ + _serial_puts(cur_dev, str); +} + int serial_getc(void) { - struct dm_serial_ops *ops = serial_get_ops(cur_dev); - int err; + return _serial_getc(cur_dev); +} - do { - err = ops->getc(cur_dev); - } while (err == -EAGAIN); +int serial_tstc(void) +{ + return _serial_tstc(cur_dev); +} - return err >= 0 ? err : 0; +void serial_setbrg(void) +{ + struct dm_serial_ops *ops = serial_get_ops(cur_dev); + + if (ops->setbrg) + ops->setbrg(cur_dev, gd->baudrate); } void serial_stdio_init(void) { } -void serial_stub_putc(struct stdio_dev *sdev, const char ch) +static void serial_stub_putc(struct stdio_dev *sdev, const char ch) { - struct udevice *dev = sdev->priv; - struct dm_serial_ops *ops = serial_get_ops(dev); - - ops->putc(dev, ch); + _serial_putc(sdev->priv, ch); } void serial_stub_puts(struct stdio_dev *sdev, const char *str) { - while (*str) - serial_stub_putc(sdev, *str++); + _serial_puts(sdev->priv, str); } int serial_stub_getc(struct stdio_dev *sdev) { - struct udevice *dev = sdev->priv; - struct dm_serial_ops *ops = serial_get_ops(dev); - - int err; - - do { - err = ops->getc(dev); - } while (err == -EAGAIN); - - return err >= 0 ? err : 0; + return _serial_getc(sdev->priv); } int serial_stub_tstc(struct stdio_dev *sdev) { - struct udevice *dev = sdev->priv; - struct dm_serial_ops *ops = serial_get_ops(dev); - - if (ops->pending) - return ops->pending(dev, true); - - return 1; + return _serial_tstc(sdev->priv); } static int serial_post_probe(struct udevice *dev) diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 82fbbd92e2..18e41b2302 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -157,7 +157,6 @@ serial_initfunc(sh_serial_initialize); serial_initfunc(arm_dcc_initialize); serial_initfunc(mxs_auart_initialize); serial_initfunc(arc_serial_initialize); -serial_initfunc(uniphier_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -251,33 +250,32 @@ void serial_initialize(void) arm_dcc_initialize(); mxs_auart_initialize(); arc_serial_initialize(); - uniphier_serial_initialize(); serial_assign(default_serial_console()->name); } -int serial_stub_start(struct stdio_dev *sdev) +static int serial_stub_start(struct stdio_dev *sdev) { struct serial_device *dev = sdev->priv; return dev->start(); } -int serial_stub_stop(struct stdio_dev *sdev) +static int serial_stub_stop(struct stdio_dev *sdev) { struct serial_device *dev = sdev->priv; return dev->stop(); } -void serial_stub_putc(struct stdio_dev *sdev, const char ch) +static void serial_stub_putc(struct stdio_dev *sdev, const char ch) { struct serial_device *dev = sdev->priv; dev->putc(ch); } -void serial_stub_puts(struct stdio_dev *sdev, const char *str) +static void serial_stub_puts(struct stdio_dev *sdev, const char *str) { struct serial_device *dev = sdev->priv; diff --git a/drivers/serial/serial_coreboot.c b/drivers/serial/serial_coreboot.c new file mode 100644 index 0000000000..5c6a76c59c --- /dev/null +++ b/drivers/serial/serial_coreboot.c @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id coreboot_serial_ids[] = { + { .compatible = "coreboot-uart" }, + { } +}; + +static int coreboot_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = 1843200; + + return 0; +} +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_coreboot", + .id = UCLASS_SERIAL, + .of_match = coreboot_serial_ids, + .ofdata_to_platdata = coreboot_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index 313d560afc..d6cf1d874a 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -5,37 +5,15 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <watchdog.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> +#include <dm/platform_data/serial_mxc.h> #include <serial.h> #include <linux/compiler.h> -#define __REG(x) (*((volatile u32 *)(x))) - -#ifndef CONFIG_MXC_UART_BASE -#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver" -#endif - -#define UART_PHYS CONFIG_MXC_UART_BASE - -/* Register definitions */ -#define URXD 0x0 /* Receiver Register */ -#define UTXD 0x40 /* Transmitter Register */ -#define UCR1 0x80 /* Control Register 1 */ -#define UCR2 0x84 /* Control Register 2 */ -#define UCR3 0x88 /* Control Register 3 */ -#define UCR4 0x8c /* Control Register 4 */ -#define UFCR 0x90 /* FIFO Control Register */ -#define USR1 0x94 /* Status Register 1 */ -#define USR2 0x98 /* Status Register 2 */ -#define UESC 0x9c /* Escape Character Register */ -#define UTIM 0xa0 /* Escape Timer Register */ -#define UBIR 0xa4 /* BRM Incremental Register */ -#define UBMR 0xa8 /* BRM Modulator Register */ -#define UBRC 0xac /* Baud Rate Count Register */ -#define UTS 0xb4 /* UART Test Register (mx31) */ - /* UART Control Register Bit Fields.*/ #define URXD_CHARRDY (1<<15) #define URXD_ERR (1<<14) @@ -128,6 +106,33 @@ #define UTS_RXFULL (1<<3) /* RxFIFO full */ #define UTS_SOFTRST (1<<0) /* Software reset */ +#ifndef CONFIG_DM_SERIAL + +#ifndef CONFIG_MXC_UART_BASE +#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver" +#endif + +#define UART_PHYS CONFIG_MXC_UART_BASE + +#define __REG(x) (*((volatile u32 *)(x))) + +/* Register definitions */ +#define URXD 0x0 /* Receiver Register */ +#define UTXD 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define UTS 0xb4 /* UART Test Register (mx31) */ + DECLARE_GLOBAL_DATA_PTR; static void mxc_serial_setbrg(void) @@ -222,3 +227,118 @@ __weak struct serial_device *default_serial_console(void) { return &mxc_serial_drv; } +#endif + +#ifdef CONFIG_DM_SERIAL + +struct mxc_uart { + u32 rxd; + u32 spare0[15]; + + u32 txd; + u32 spare1[15]; + + u32 cr1; + u32 cr2; + u32 cr3; + u32 cr4; + + u32 fcr; + u32 sr1; + u32 sr2; + u32 esc; + + u32 tim; + u32 bir; + u32 bmr; + u32 brc; + + u32 onems; + u32 ts; +}; + +int mxc_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct mxc_serial_platdata *plat = dev->platdata; + struct mxc_uart *const uart = plat->reg; + u32 clk = imx_get_uartclk(); + + writel(4 << 7, &uart->fcr); /* divide input clock by 2 */ + writel(0xf, &uart->bir); + writel(clk / (2 * baudrate), &uart->bmr); + + writel(UCR2_WS | UCR2_IRTS | UCR2_RXEN | UCR2_TXEN | UCR2_SRST, + &uart->cr2); + writel(UCR1_UARTEN, &uart->cr1); + + return 0; +} + +static int mxc_serial_probe(struct udevice *dev) +{ + struct mxc_serial_platdata *plat = dev->platdata; + struct mxc_uart *const uart = plat->reg; + + writel(0, &uart->cr1); + writel(0, &uart->cr2); + while (!(readl(&uart->cr2) & UCR2_SRST)); + writel(0x704 | UCR3_ADNIMP, &uart->cr3); + writel(0x8000, &uart->cr4); + writel(0x2b, &uart->esc); + writel(0, &uart->tim); + writel(0, &uart->ts); + + return 0; +} + +static int mxc_serial_getc(struct udevice *dev) +{ + struct mxc_serial_platdata *plat = dev->platdata; + struct mxc_uart *const uart = plat->reg; + + if (readl(&uart->ts) & UTS_RXEMPTY) + return -EAGAIN; + + return readl(&uart->rxd) & URXD_RX_DATA; +} + +static int mxc_serial_putc(struct udevice *dev, const char ch) +{ + struct mxc_serial_platdata *plat = dev->platdata; + struct mxc_uart *const uart = plat->reg; + + if (!(readl(&uart->ts) & UTS_TXEMPTY)) + return -EAGAIN; + + writel(ch, &uart->txd); + + return 0; +} + +static int mxc_serial_pending(struct udevice *dev, bool input) +{ + struct mxc_serial_platdata *plat = dev->platdata; + struct mxc_uart *const uart = plat->reg; + uint32_t sr2 = readl(&uart->sr2); + + if (input) + return sr2 & USR2_RDR ? 1 : 0; + else + return sr2 & USR2_TXDC ? 0 : 1; +} + +static const struct dm_serial_ops mxc_serial_ops = { + .putc = mxc_serial_putc, + .pending = mxc_serial_pending, + .getc = mxc_serial_getc, + .setbrg = mxc_serial_setbrg, +}; + +U_BOOT_DRIVER(serial_mxc) = { + .name = "serial_mxc", + .id = UCLASS_SERIAL, + .probe = mxc_serial_probe, + .ops = &mxc_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; +#endif diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index 632da4cf70..799ef6a667 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -119,8 +119,7 @@ static NS16550_t serial_ports[6] = { .puts = eserial##port##_puts, \ } -void -_serial_putc(const char c,const int port) +static void _serial_putc(const char c, const int port) { if (c == '\n') NS16550_putc(PORT, '\r'); @@ -128,35 +127,29 @@ _serial_putc(const char c,const int port) NS16550_putc(PORT, c); } -void -_serial_putc_raw(const char c,const int port) +static void _serial_putc_raw(const char c, const int port) { NS16550_putc(PORT, c); } -void -_serial_puts (const char *s,const int port) +static void _serial_puts(const char *s, const int port) { while (*s) { - _serial_putc (*s++,port); + _serial_putc(*s++, port); } } - -int -_serial_getc(const int port) +static int _serial_getc(const int port) { return NS16550_getc(PORT); } -int -_serial_tstc(const int port) +static int _serial_tstc(const int port) { return NS16550_tstc(PORT); } -void -_serial_setbrg (const int port) +static void _serial_setbrg(const int port) { int clock_divisor; diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c new file mode 100644 index 0000000000..265fe007a0 --- /dev/null +++ b/drivers/serial/serial_omap.c @@ -0,0 +1,47 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <ns16550.h> +#include <serial.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_OF_CONTROL +static const struct udevice_id omap_serial_ids[] = { + { .compatible = "ti,omap3-uart" }, + { } +}; + +static int omap_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", -1); + plat->reg_shift = 2; + + return 0; +} +#endif + +U_BOOT_DRIVER(serial_omap_ns16550) = { + .name = "serial_omap", + .id = UCLASS_SERIAL, + .of_match = of_match_ptr(omap_serial_ids), + .ofdata_to_platdata = of_match_ptr(omap_serial_ofdata_to_platdata), + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index dfb610e1a9..38dda91021 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -12,125 +12,90 @@ /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <watchdog.h> #include <asm/io.h> #include <serial.h> +#include <dm/platform_data/serial_pl01x.h> #include <linux/compiler.h> -#include "serial_pl01x.h" +#include "serial_pl01x_internal.h" + +#ifndef CONFIG_DM_SERIAL -/* - * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 - * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 - * Versatile PB has four UARTs. - */ -#define CONSOLE_PORT CONFIG_CONS_INDEX static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; +static enum pl01x_type pl01x_type __attribute__ ((section(".data"))); +static struct pl01x_regs *base_regs __attribute__ ((section(".data"))); #define NUM_PORTS (sizeof(port)/sizeof(port[0])) -static void pl01x_putc (int portnum, char c); -static int pl01x_getc (int portnum); -static int pl01x_tstc (int portnum); -unsigned int baudrate = CONFIG_BAUDRATE; DECLARE_GLOBAL_DATA_PTR; +#endif -static struct pl01x_regs *pl01x_get_regs(int portnum) -{ - return (struct pl01x_regs *) port[portnum]; -} - -#ifdef CONFIG_PL010_SERIAL - -static int pl01x_serial_init(void) +static int pl01x_putc(struct pl01x_regs *regs, char c) { - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); - unsigned int divisor; - - /* First, disable everything */ - writel(0, ®s->pl010_cr); + /* Wait until there is space in the FIFO */ + if (readl(®s->fr) & UART_PL01x_FR_TXFF) + return -EAGAIN; - /* Set baud rate */ - switch (baudrate) { - case 9600: - divisor = UART_PL010_BAUD_9600; - break; + /* Send the character */ + writel(c, ®s->dr); - case 19200: - divisor = UART_PL010_BAUD_9600; - break; + return 0; +} - case 38400: - divisor = UART_PL010_BAUD_38400; - break; +static int pl01x_getc(struct pl01x_regs *regs) +{ + unsigned int data; - case 57600: - divisor = UART_PL010_BAUD_57600; - break; + /* Wait until there is data in the FIFO */ + if (readl(®s->fr) & UART_PL01x_FR_RXFE) + return -EAGAIN; - case 115200: - divisor = UART_PL010_BAUD_115200; - break; + data = readl(®s->dr); - default: - divisor = UART_PL010_BAUD_38400; + /* Check for an error flag */ + if (data & 0xFFFFFF00) { + /* Clear the error */ + writel(0xFFFFFFFF, ®s->ecr); + return -1; } - writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm); - writel(divisor & 0xff, ®s->pl010_lcrl); - - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ - writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, ®s->pl010_lcrh); - - /* Finally, enable the UART */ - writel(UART_PL010_CR_UARTEN, ®s->pl010_cr); - - return 0; + return (int) data; } -#endif /* CONFIG_PL010_SERIAL */ - -#ifdef CONFIG_PL011_SERIAL +static int pl01x_tstc(struct pl01x_regs *regs) +{ + WATCHDOG_RESET(); + return !(readl(®s->fr) & UART_PL01x_FR_RXFE); +} -static int pl01x_serial_init(void) +static int pl01x_generic_serial_init(struct pl01x_regs *regs, + enum pl01x_type type) { - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); - unsigned int temp; - unsigned int divider; - unsigned int remainder; - unsigned int fraction; unsigned int lcr; #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - /* Empty RX fifo if necessary */ - if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { - while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) - readl(®s->dr); + if (type == TYPE_PL011) { + /* Empty RX fifo if necessary */ + if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { + while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) + readl(®s->dr); + } } #endif /* First, disable everything */ - writel(0, ®s->pl011_cr); - - /* - * Set baud rate - * - * IBRD = UART_CLK / (16 * BAUD_RATE) - * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) - */ - temp = 16 * baudrate; - divider = CONFIG_PL011_CLOCK / temp; - remainder = CONFIG_PL011_CLOCK % temp; - temp = (8 * remainder) / baudrate; - fraction = (temp >> 1) + (temp & 1); - - writel(divider, ®s->pl011_ibrd); - writel(fraction, ®s->pl011_fbrd); + writel(0, ®s->pl010_cr); /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; writel(lcr, ®s->pl011_lcrh); + switch (type) { + case TYPE_PL010: + break; + case TYPE_PL011: { #ifdef CONFIG_PL011_SERIAL_RLCR - { int i; /* @@ -144,90 +109,151 @@ static int pl01x_serial_init(void) writel(lcr, ®s->pl011_rlcr); /* lcrh needs to be set again for change to be effective */ writel(lcr, ®s->pl011_lcrh); - } #endif - /* Finally, enable the UART */ - writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | - UART_PL011_CR_RTS, ®s->pl011_cr); + break; + } + default: + return -EINVAL; + } return 0; } -#endif /* CONFIG_PL011_SERIAL */ - -static void pl01x_serial_putc(const char c) +static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, + int clock, int baudrate) { - if (c == '\n') - pl01x_putc (CONSOLE_PORT, '\r'); + switch (type) { + case TYPE_PL010: { + unsigned int divisor; + + switch (baudrate) { + case 9600: + divisor = UART_PL010_BAUD_9600; + break; + case 19200: + divisor = UART_PL010_BAUD_9600; + break; + case 38400: + divisor = UART_PL010_BAUD_38400; + break; + case 57600: + divisor = UART_PL010_BAUD_57600; + break; + case 115200: + divisor = UART_PL010_BAUD_115200; + break; + default: + divisor = UART_PL010_BAUD_38400; + } + + writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm); + writel(divisor & 0xff, ®s->pl010_lcrl); + + /* Finally, enable the UART */ + writel(UART_PL010_CR_UARTEN, ®s->pl010_cr); + break; + } + case TYPE_PL011: { + unsigned int temp; + unsigned int divider; + unsigned int remainder; + unsigned int fraction; - pl01x_putc (CONSOLE_PORT, c); -} + /* + * Set baud rate + * + * IBRD = UART_CLK / (16 * BAUD_RATE) + * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) + * / (16 * BAUD_RATE)) + */ + temp = 16 * baudrate; + divider = clock / temp; + remainder = clock % temp; + temp = (8 * remainder) / baudrate; + fraction = (temp >> 1) + (temp & 1); + + writel(divider, ®s->pl011_ibrd); + writel(fraction, ®s->pl011_fbrd); + + /* Finally, enable the UART */ + writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | + UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); + break; + } + default: + return -EINVAL; + } -static int pl01x_serial_getc(void) -{ - return pl01x_getc (CONSOLE_PORT); + return 0; } -static int pl01x_serial_tstc(void) +#ifndef CONFIG_DM_SERIAL +static void pl01x_serial_init_baud(int baudrate) { - return pl01x_tstc (CONSOLE_PORT); + int clock = 0; + +#if defined(CONFIG_PL010_SERIAL) + pl01x_type = TYPE_PL010; +#elif defined(CONFIG_PL011_SERIAL) + pl01x_type = TYPE_PL011; + clock = CONFIG_PL011_CLOCK; +#endif + base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX]; + + pl01x_generic_serial_init(base_regs, pl01x_type); + pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate); } -static void pl01x_serial_setbrg(void) +/* + * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 + * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 + * Versatile PB has four UARTs. + */ +int pl01x_serial_init(void) { - struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); + pl01x_serial_init_baud(CONFIG_BAUDRATE); - baudrate = gd->baudrate; - /* - * Flush FIFO and wait for non-busy before changing baudrate to avoid - * crap in console - */ - while (!(readl(®s->fr) & UART_PL01x_FR_TXFE)) - WATCHDOG_RESET(); - while (readl(®s->fr) & UART_PL01x_FR_BUSY) - WATCHDOG_RESET(); - serial_init(); + return 0; } -static void pl01x_putc (int portnum, char c) +static void pl01x_serial_putc(const char c) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); - - /* Wait until there is space in the FIFO */ - while (readl(®s->fr) & UART_PL01x_FR_TXFF) - WATCHDOG_RESET(); + if (c == '\n') + while (pl01x_putc(base_regs, '\r') == -EAGAIN); - /* Send the character */ - writel(c, ®s->dr); + while (pl01x_putc(base_regs, c) == -EAGAIN); } -static int pl01x_getc (int portnum) +static int pl01x_serial_getc(void) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); - unsigned int data; + while (1) { + int ch = pl01x_getc(base_regs); - /* Wait until there is data in the FIFO */ - while (readl(®s->fr) & UART_PL01x_FR_RXFE) - WATCHDOG_RESET(); - - data = readl(®s->dr); + if (ch == -EAGAIN) { + WATCHDOG_RESET(); + continue; + } - /* Check for an error flag */ - if (data & 0xFFFFFF00) { - /* Clear the error */ - writel(0xFFFFFFFF, ®s->ecr); - return -1; + return ch; } - - return (int) data; } -static int pl01x_tstc (int portnum) +static int pl01x_serial_tstc(void) { - struct pl01x_regs *regs = pl01x_get_regs(portnum); + return pl01x_tstc(base_regs); +} - WATCHDOG_RESET(); - return !(readl(®s->fr) & UART_PL01x_FR_RXFE); +static void pl01x_serial_setbrg(void) +{ + /* + * Flush FIFO and wait for non-busy before changing baudrate to avoid + * crap in console + */ + while (!(readl(&base_regs->fr) & UART_PL01x_FR_TXFE)) + WATCHDOG_RESET(); + while (readl(&base_regs->fr) & UART_PL01x_FR_BUSY) + WATCHDOG_RESET(); + pl01x_serial_init_baud(gd->baudrate); } static struct serial_device pl01x_serial_drv = { @@ -250,3 +276,74 @@ __weak struct serial_device *default_serial_console(void) { return &pl01x_serial_drv; } + +#endif /* nCONFIG_DM_SERIAL */ + +#ifdef CONFIG_DM_SERIAL + +struct pl01x_priv { + struct pl01x_regs *regs; + enum pl01x_type type; +}; + +static int pl01x_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct pl01x_serial_platdata *plat = dev_get_platdata(dev); + struct pl01x_priv *priv = dev_get_priv(dev); + + pl01x_generic_setbrg(priv->regs, priv->type, plat->clock, baudrate); + + return 0; +} + +static int pl01x_serial_probe(struct udevice *dev) +{ + struct pl01x_serial_platdata *plat = dev_get_platdata(dev); + struct pl01x_priv *priv = dev_get_priv(dev); + + priv->regs = (struct pl01x_regs *)plat->base; + priv->type = plat->type; + return pl01x_generic_serial_init(priv->regs, priv->type); +} + +static int pl01x_serial_getc(struct udevice *dev) +{ + struct pl01x_priv *priv = dev_get_priv(dev); + + return pl01x_getc(priv->regs); +} + +static int pl01x_serial_putc(struct udevice *dev, const char ch) +{ + struct pl01x_priv *priv = dev_get_priv(dev); + + return pl01x_putc(priv->regs, ch); +} + +static int pl01x_serial_pending(struct udevice *dev, bool input) +{ + struct pl01x_priv *priv = dev_get_priv(dev); + unsigned int fr = readl(&priv->regs->fr); + + if (input) + return pl01x_tstc(priv->regs); + else + return fr & UART_PL01x_FR_TXFF ? 0 : 1; +} + +static const struct dm_serial_ops pl01x_serial_ops = { + .putc = pl01x_serial_putc, + .pending = pl01x_serial_pending, + .getc = pl01x_serial_getc, + .setbrg = pl01x_serial_setbrg, +}; + +U_BOOT_DRIVER(serial_pl01x) = { + .name = "serial_pl01x", + .id = UCLASS_SERIAL, + .probe = pl01x_serial_probe, + .ops = &pl01x_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +#endif diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x_internal.h index 288a4f19f5..288a4f19f5 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x_internal.h diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index c07f4c9b47..7afc5044a8 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -69,7 +69,7 @@ DECLARE_GLOBAL_DATA_PTR; static int hwflow; #endif -void _serial_setbrg(const int dev_index) +static void _serial_setbrg(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); unsigned int reg = 0; @@ -131,7 +131,7 @@ static int serial_init_dev(const int dev_index) * otherwise. When the function is succesfull, the character read is * written into its argument c. */ -int _serial_getc(const int dev_index) +static int _serial_getc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); @@ -181,7 +181,7 @@ void enable_putc(void) /* * Output a single byte to the serial port. */ -void _serial_putc(const char c, const int dev_index) +static void _serial_putc(const char c, const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); #ifdef CONFIG_MODEM_SUPPORT @@ -212,7 +212,7 @@ static inline void serial_putc_dev(unsigned int dev_index, const char c) /* * Test whether a character is in the RX buffer */ -int _serial_tstc(const int dev_index) +static int _serial_tstc(const int dev_index) { struct s3c24x0_uart *uart = s3c24x0_get_base_uart(dev_index); @@ -224,7 +224,7 @@ static inline int serial_tstc_dev(unsigned int dev_index) return _serial_tstc(dev_index); } -void _serial_puts(const char *s, const int dev_index) +static void _serial_puts(const char *s, const int dev_index) { while (*s) { _serial_putc(*s++, dev_index); diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 98c62b4c14..8469afdaae 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -9,6 +9,8 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <fdtdec.h> #include <linux/compiler.h> #include <asm/io.h> @@ -18,26 +20,18 @@ DECLARE_GLOBAL_DATA_PTR; -#define RX_FIFO_COUNT_MASK 0xff -#define RX_FIFO_FULL_MASK (1 << 8) -#define TX_FIFO_FULL_MASK (1 << 24) +#define RX_FIFO_COUNT_SHIFT 0 +#define RX_FIFO_COUNT_MASK (0xff << RX_FIFO_COUNT_SHIFT) +#define RX_FIFO_FULL (1 << 8) +#define TX_FIFO_COUNT_SHIFT 16 +#define TX_FIFO_COUNT_MASK (0xff << TX_FIFO_COUNT_SHIFT) +#define TX_FIFO_FULL (1 << 24) /* Information about a serial port */ -struct fdt_serial { - u32 base_addr; /* address of registers in physical memory */ +struct s5p_serial_platdata { + struct s5p_uart *reg; /* address of registers in physical memory */ u8 port_id; /* uart port number */ - u8 enabled; /* 1 if enabled, 0 if disabled */ -} config __attribute__ ((section(".data"))); - -static inline struct s5p_uart *s5p_get_base_uart(int dev_index) -{ -#ifdef CONFIG_OF_CONTROL - return (struct s5p_uart *)(config.base_addr); -#else - u32 offset = dev_index * sizeof(struct s5p_uart); - return (struct s5p_uart *)(samsung_get_base_uart() + offset); -#endif -} +}; /* * The coefficient, used to calculate the baudrate on S5P UARTs is @@ -65,23 +59,13 @@ static const int udivslot[] = { 0xffdf, }; -static void serial_setbrg_dev(const int dev_index) +int s5p_serial_setbrg(struct udevice *dev, int baudrate) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - u32 uclk = get_uart_clk(dev_index); - u32 baudrate = gd->baudrate; + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; + u32 uclk = get_uart_clk(plat->port_id); u32 val; -#if defined(CONFIG_SILENT_CONSOLE) && \ - defined(CONFIG_OF_CONTROL) && \ - !defined(CONFIG_SPL_BUILD) - if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0)) - gd->flags |= GD_FLG_SILENT; -#endif - - if (!config.enabled) - return; - val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); @@ -90,15 +74,14 @@ static void serial_setbrg_dev(const int dev_index) writew(udivslot[val % 16], &uart->rest.slot); else writeb(val % 16, &uart->rest.value); + + return 0; } -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int serial_init_dev(const int dev_index) +static int s5p_serial_probe(struct udevice *dev) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; /* enable FIFOs, auto clear Rx FIFO */ writel(0x3, &uart->ufcon); @@ -108,14 +91,11 @@ static int serial_init_dev(const int dev_index) /* No interrupts, no DMA, pure polling */ writel(0x245, &uart->ucon); - serial_setbrg_dev(dev_index); - return 0; } -static int serial_err_check(const int dev_index, int op) +static int serial_err_check(const struct s5p_uart *const uart, int op) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); unsigned int mask; /* @@ -133,169 +113,78 @@ static int serial_err_check(const int dev_index, int op) return readl(&uart->uerstat) & mask; } -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int serial_getc_dev(const int dev_index) +static int s5p_serial_getc(struct udevice *dev) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - - if (!config.enabled) - return 0; + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; - /* wait for character to arrive */ - while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | - RX_FIFO_FULL_MASK))) { - if (serial_err_check(dev_index, 0)) - return 0; - } + if (!(readl(&uart->ufstat) & RX_FIFO_COUNT_MASK)) + return -EAGAIN; + serial_err_check(uart, 0); return (int)(readb(&uart->urxh) & 0xff); } -/* - * Output a single byte to the serial port. - */ -static void serial_putc_dev(const char c, const int dev_index) +static int s5p_serial_putc(struct udevice *dev, const char ch) { - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - - if (!config.enabled) - return; - - /* wait for room in the tx FIFO */ - while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { - if (serial_err_check(dev_index, 1)) - return; - } + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; - writeb(c, &uart->utxh); + if (readl(&uart->ufstat) & TX_FIFO_FULL) + return -EAGAIN; - /* If \n, also do \r */ - if (c == '\n') - serial_putc('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int serial_tstc_dev(const int dev_index) -{ - struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + writeb(ch, &uart->utxh); + serial_err_check(uart, 1); - if (!config.enabled) - return 0; - - return (int)(readl(&uart->utrstat) & 0x1); + return 0; } -static void serial_puts_dev(const char *s, const int dev_index) +static int s5p_serial_pending(struct udevice *dev, bool input) { - while (*s) - serial_putc_dev(*s++, dev_index); -} + struct s5p_serial_platdata *plat = dev->platdata; + struct s5p_uart *const uart = plat->reg; + uint32_t ufstat = readl(&uart->ufstat); -/* Multi serial device functions */ -#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \ -static int s5p_serial##port##_init(void) { return serial_init_dev(port); } \ -static void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \ -static int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \ -static int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \ -static void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \ -static void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); } - -#define INIT_S5P_SERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = s5p_serial##port##_init, \ - .stop = NULL, \ - .setbrg = s5p_serial##port##_setbrg, \ - .getc = s5p_serial##port##_getc, \ - .tstc = s5p_serial##port##_tstc, \ - .putc = s5p_serial##port##_putc, \ - .puts = s5p_serial##port##_puts, \ + if (input) + return (ufstat & RX_FIFO_COUNT_MASK) >> RX_FIFO_COUNT_SHIFT; + else + return (ufstat & TX_FIFO_COUNT_MASK) >> TX_FIFO_COUNT_SHIFT; } -DECLARE_S5P_SERIAL_FUNCTIONS(0); -struct serial_device s5p_serial0_device = - INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0"); -DECLARE_S5P_SERIAL_FUNCTIONS(1); -struct serial_device s5p_serial1_device = - INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1"); -DECLARE_S5P_SERIAL_FUNCTIONS(2); -struct serial_device s5p_serial2_device = - INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2"); -DECLARE_S5P_SERIAL_FUNCTIONS(3); -struct serial_device s5p_serial3_device = - INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3"); - -#ifdef CONFIG_OF_CONTROL -int fdtdec_decode_console(int *index, struct fdt_serial *uart) +static int s5p_serial_ofdata_to_platdata(struct udevice *dev) { - const void *blob = gd->fdt_blob; - int node; + struct s5p_serial_platdata *plat = dev->platdata; + fdt_addr_t addr; - node = fdt_path_offset(blob, "console"); - if (node < 0) - return node; + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; - uart->base_addr = fdtdec_get_addr(blob, node, "reg"); - if (uart->base_addr == FDT_ADDR_T_NONE) - return -FDT_ERR_NOTFOUND; - - uart->port_id = fdtdec_get_int(blob, node, "id", -1); - uart->enabled = fdtdec_get_is_enabled(blob, node); + plat->reg = (struct s5p_uart *)addr; + plat->port_id = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "id", -1); return 0; } -#endif -__weak struct serial_device *default_serial_console(void) -{ -#ifdef CONFIG_OF_CONTROL - int index = 0; - - if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) { - debug("Cannot decode default console node\n"); - return NULL; - } - - switch (config.port_id) { - case 0: - return &s5p_serial0_device; - case 1: - return &s5p_serial1_device; - case 2: - return &s5p_serial2_device; - case 3: - return &s5p_serial3_device; - default: - debug("Unknown config.port_id: %d", config.port_id); - break; - } - - return NULL; -#else - config.enabled = 1; -#if defined(CONFIG_SERIAL0) - return &s5p_serial0_device; -#elif defined(CONFIG_SERIAL1) - return &s5p_serial1_device; -#elif defined(CONFIG_SERIAL2) - return &s5p_serial2_device; -#elif defined(CONFIG_SERIAL3) - return &s5p_serial3_device; -#else -#error "CONFIG_SERIAL? missing." -#endif -#endif -} +static const struct dm_serial_ops s5p_serial_ops = { + .putc = s5p_serial_putc, + .pending = s5p_serial_pending, + .getc = s5p_serial_getc, + .setbrg = s5p_serial_setbrg, +}; -void s5p_serial_initialize(void) -{ - serial_register(&s5p_serial0_device); - serial_register(&s5p_serial1_device); - serial_register(&s5p_serial2_device); - serial_register(&s5p_serial3_device); -} +static const struct udevice_id s5p_serial_ids[] = { + { .compatible = "samsung,exynos4210-uart" }, + { } +}; + +U_BOOT_DRIVER(serial_s5p) = { + .name = "serial_s5p", + .id = UCLASS_SERIAL, + .of_match = s5p_serial_ids, + .ofdata_to_platdata = s5p_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct s5p_serial_platdata), + .probe = s5p_serial_probe, + .ops = &s5p_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 144a925394..7c1f271376 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -122,7 +122,7 @@ static void handle_error(void) sci_out(&sh_sci, SCLSR, 0x00); } -void serial_raw_putc(const char c) +static void serial_raw_putc(const char c) { while (1) { /* Tx fifo is empty */ @@ -152,7 +152,7 @@ static int sh_serial_tstc(void) } -int serial_getc_check(void) +static int serial_getc_check(void) { unsigned short status; diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index f8c9d921e2..9114b3ed60 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -2,14 +2,14 @@ * Copyright (C) 2012-2014 Panasonic Corporation * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> * - * Based on serial_ns16550.c - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <dm/device.h> +#include <dm/platform_data/serial-uniphier.h> #include <serial.h> #define UART_REG(x) \ @@ -48,157 +48,104 @@ struct uniphier_serial { #define UART_LSR_DR 0x01 /* Data ready */ #define UART_LSR_THRE 0x20 /* Xmit holding register empty */ -DECLARE_GLOBAL_DATA_PTR; +struct uniphier_serial_private_data { + struct uniphier_serial __iomem *membase; +}; + +#define uniphier_serial_port(dev) \ + ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase -static void uniphier_serial_init(struct uniphier_serial *port) +int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; writeb(UART_LCR_WLS_8, &port->lcr); - divisor = DIV_ROUND_CLOSEST(CONFIG_SYS_UNIPHIER_UART_CLK, - mode_x_div * gd->baudrate); + divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); writew(divisor, &port->dlr); -} -static void uniphier_serial_setbrg(struct uniphier_serial *port) -{ - uniphier_serial_init(port); + return 0; } -static int uniphier_serial_tstc(struct uniphier_serial *port) +static int uniphier_serial_getc(struct udevice *dev) { - return (readb(&port->lsr) & UART_LSR_DR) != 0; -} + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); -static int uniphier_serial_getc(struct uniphier_serial *port) -{ - while (!uniphier_serial_tstc(port)) - ; + if (!(readb(&port->lsr) & UART_LSR_DR)) + return -EAGAIN; return readb(&port->rbr); } -static void uniphier_serial_putc(struct uniphier_serial *port, const char c) +static int uniphier_serial_putc(struct udevice *dev, const char c) { - if (c == '\n') - uniphier_serial_putc(port, '\r'); + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - while (!(readb(&port->lsr) & UART_LSR_THRE)) - ; + if (!(readb(&port->lsr) & UART_LSR_THRE)) + return -EAGAIN; writeb(c, &port->thr); + + return 0; } -static struct uniphier_serial *serial_ports[4] = { -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE0 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE0, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE1 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE1, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE2 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE2, -#else - NULL, -#endif -#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE3 - (struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE3, -#else - NULL, -#endif -}; +int uniphier_serial_probe(struct udevice *dev) +{ + struct uniphier_serial_private_data *priv = dev_get_priv(dev); + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); -/* Multi serial device functions */ -#define DECLARE_ESERIAL_FUNCTIONS(port) \ - static int eserial##port##_init(void) \ - { \ - uniphier_serial_init(serial_ports[port]); \ - return 0 ; \ - } \ - static void eserial##port##_setbrg(void) \ - { \ - uniphier_serial_setbrg(serial_ports[port]); \ - } \ - static int eserial##port##_getc(void) \ - { \ - return uniphier_serial_getc(serial_ports[port]); \ - } \ - static int eserial##port##_tstc(void) \ - { \ - return uniphier_serial_tstc(serial_ports[port]); \ - } \ - static void eserial##port##_putc(const char c) \ - { \ - uniphier_serial_putc(serial_ports[port], c); \ - } - -/* Serial device descriptor */ -#define INIT_ESERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = eserial##port##_init, \ - .stop = NULL, \ - .setbrg = eserial##port##_setbrg, \ - .getc = eserial##port##_getc, \ - .tstc = eserial##port##_tstc, \ - .putc = eserial##port##_putc, \ - .puts = default_serial_puts, \ -} + priv->membase = map_sysmem(plat->base, sizeof(struct uniphier_serial)); -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) -DECLARE_ESERIAL_FUNCTIONS(0); -struct serial_device uniphier_serial0_device = - INIT_ESERIAL_STRUCTURE(0, "ttyS0"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) -DECLARE_ESERIAL_FUNCTIONS(1); -struct serial_device uniphier_serial1_device = - INIT_ESERIAL_STRUCTURE(1, "ttyS1"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) -DECLARE_ESERIAL_FUNCTIONS(2); -struct serial_device uniphier_serial2_device = - INIT_ESERIAL_STRUCTURE(2, "ttyS2"); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) -DECLARE_ESERIAL_FUNCTIONS(3); -struct serial_device uniphier_serial3_device = - INIT_ESERIAL_STRUCTURE(3, "ttyS3"); -#endif + if (!priv->membase) + return -ENOMEM; -__weak struct serial_device *default_serial_console(void) + return 0; +} + +int uniphier_serial_remove(struct udevice *dev) { -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) - return &uniphier_serial0_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) - return &uniphier_serial1_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) - return &uniphier_serial2_device; -#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) - return &uniphier_serial3_device; -#else -#error "No uniphier serial ports configured." -#endif + unmap_sysmem(uniphier_serial_port(dev)); + + return 0; } -void uniphier_serial_initialize(void) +#ifdef CONFIG_OF_CONTROL +static const struct udevice_id uniphier_uart_of_match = { + { .compatible = "panasonic,uniphier-uart"}, + {}, +}; + +static int uniphier_serial_ofdata_to_platdata(struct udevice *dev) { -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0) - serial_register(&uniphier_serial0_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1) - serial_register(&uniphier_serial1_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2) - serial_register(&uniphier_serial2_device); -#endif -#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3) - serial_register(&uniphier_serial3_device); -#endif + /* + * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com) + * + * Implement conversion code from DTB to platform data + * when supporting CONFIG_OF_CONTROL on UniPhir platform. + */ } +#endif + +static const struct dm_serial_ops uniphier_serial_ops = { + .setbrg = uniphier_serial_setbrg, + .getc = uniphier_serial_getc, + .putc = uniphier_serial_putc, +}; + +U_BOOT_DRIVER(uniphier_serial) = { + .name = DRIVER_NAME, + .id = UCLASS_SERIAL, + .of_match = of_match_ptr(uniphier_uart_of_match), + .ofdata_to_platdata = of_match_ptr(uniphier_serial_ofdata_to_platdata), + .probe = uniphier_serial_probe, + .remove = uniphier_serial_remove, + .priv_auto_alloc_size = sizeof(struct uniphier_serial_private_data), + .platdata_auto_alloc_size = + sizeof(struct uniphier_serial_platform_data), + .ops = &uniphier_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile new file mode 100644 index 0000000000..3d4baa51d6 --- /dev/null +++ b/drivers/soc/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the U-boot SOC specific device drivers. +# + +obj-$(CONFIG_ARCH_KEYSTONE) += keystone/ diff --git a/drivers/soc/keystone/Makefile b/drivers/soc/keystone/Makefile new file mode 100644 index 0000000000..c000ecac76 --- /dev/null +++ b/drivers/soc/keystone/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_TI_KEYSTONE_SERDES) += keystone_serdes.o diff --git a/drivers/soc/keystone/keystone_serdes.c b/drivers/soc/keystone/keystone_serdes.c new file mode 100644 index 0000000000..dd5eac9bb3 --- /dev/null +++ b/drivers/soc/keystone/keystone_serdes.c @@ -0,0 +1,210 @@ +/* + * TI serdes driver for keystone2. + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <errno.h> +#include <common.h> +#include <asm/ti-common/keystone_serdes.h> + +#define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x))) +#define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x))) +#define SERDES_COMLANE_REGS 0x0a00 +#define SERDES_WIZ_REGS 0x1fc0 + +#define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000) +#define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010) +#define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000) +#define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000) +#define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028) +#define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x))) +#define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034) + +#define SERDES_RESET BIT(28) +#define SERDES_LANE_RESET BIT(29) +#define SERDES_LANE_LOOPBACK BIT(30) +#define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10)) + +#define SERDES_CMU_CFG_NUM 5 +#define SERDES_COMLANE_CFG_NUM 10 +#define SERDES_LANE_CFG_NUM 10 + +struct serdes_cfg { + u32 ofs; + u32 val; + u32 mask; +}; + +struct cfg_entry { + enum ks2_serdes_clock clk; + enum ks2_serdes_rate rate; + struct serdes_cfg cmu[SERDES_CMU_CFG_NUM]; + struct serdes_cfg comlane[SERDES_COMLANE_CFG_NUM]; + struct serdes_cfg lane[SERDES_LANE_CFG_NUM]; +}; + +/* SERDES PHY lane enable configuration value, indexed by PHY interface */ +static u32 serdes_cfg_lane_enable[] = { + 0xf000f0c0, /* SGMII */ + 0xf0e9f038, /* PCSR */ +}; + +/* SERDES PHY PLL enable configuration value, indexed by PHY interface */ +static u32 serdes_cfg_pll_enable[] = { + 0xe0000000, /* SGMII */ + 0xee000000, /* PCSR */ +}; + +/** + * Array to hold all possible serdes configurations. + * Combination for 5 clock settings and 6 baud rates. + */ +static struct cfg_entry cfgs[] = { + { + .clk = SERDES_CLOCK_156P25M, + .rate = SERDES_RATE_5G, + .cmu = { + {0x0000, 0x00800000, 0xffff0000}, + {0x0014, 0x00008282, 0x0000ffff}, + {0x0060, 0x00142438, 0x00ffffff}, + {0x0064, 0x00c3c700, 0x00ffff00}, + {0x0078, 0x0000c000, 0x0000ff00} + }, + .comlane = { + {0x0a00, 0x00000800, 0x0000ff00}, + {0x0a08, 0x38a20000, 0xffff0000}, + {0x0a30, 0x008a8a00, 0x00ffff00}, + {0x0a84, 0x00000600, 0x0000ff00}, + {0x0a94, 0x10000000, 0xff000000}, + {0x0aa0, 0x81000000, 0xff000000}, + {0x0abc, 0xff000000, 0xff000000}, + {0x0ac0, 0x0000008b, 0x000000ff}, + {0x0b08, 0x583f0000, 0xffff0000}, + {0x0b0c, 0x0000004e, 0x000000ff} + }, + .lane = { + {0x0004, 0x38000080, 0xff0000ff}, + {0x0008, 0x00000000, 0x000000ff}, + {0x000c, 0x02000000, 0xff000000}, + {0x0010, 0x1b000000, 0xff000000}, + {0x0014, 0x00006fb8, 0x0000ffff}, + {0x0018, 0x758000e4, 0xffff00ff}, + {0x00ac, 0x00004400, 0x0000ff00}, + {0x002c, 0x00100800, 0x00ffff00}, + {0x0080, 0x00820082, 0x00ff00ff}, + {0x0084, 0x1d0f0385, 0xffffffff} + }, + }, +}; + +static inline void ks2_serdes_rmw(u32 addr, u32 value, u32 mask) +{ + writel(((readl(addr) & (~mask)) | (value & mask)), addr); +} + +static void ks2_serdes_cfg_setup(u32 base, struct serdes_cfg *cfg, u32 size) +{ + u32 i; + + for (i = 0; i < size; i++) + ks2_serdes_rmw(base + cfg[i].ofs, cfg[i].val, cfg[i].mask); +} + +static void ks2_serdes_lane_config(u32 base, struct serdes_cfg *cfg_lane, + u32 size, u32 lane) +{ + u32 i; + + for (i = 0; i < size; i++) + ks2_serdes_rmw(base + cfg_lane[i].ofs + SERDES_LANE_REGS(lane), + cfg_lane[i].val, cfg_lane[i].mask); +} + +static int ks2_serdes_init_cfg(u32 base, struct cfg_entry *cfg, u32 num_lanes) +{ + u32 i; + + ks2_serdes_cfg_setup(base, cfg->cmu, SERDES_CMU_CFG_NUM); + ks2_serdes_cfg_setup(base, cfg->comlane, SERDES_COMLANE_CFG_NUM); + + for (i = 0; i < num_lanes; i++) + ks2_serdes_lane_config(base, cfg->lane, SERDES_LANE_CFG_NUM, i); + + return 0; +} + +static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes) +{ + /* Bring SerDes out of Reset */ + ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET); + if (serdes->intf == SERDES_PHY_PCSR) + ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET); + + /* Enable CMU and COMLANE */ + ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff); + if (serdes->intf == SERDES_PHY_PCSR) + ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff); + + ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff); +} + +static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes) +{ + writel(serdes_cfg_pll_enable[serdes->intf], + base + SERDES_PLL_CTL_REG); +} + +static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane) +{ + if (reset) + ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), + 0x1, SERDES_LANE_RESET); + else + ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane), + 0x0, SERDES_LANE_RESET); +} + +static void ks2_serdes_lane_enable(u32 base, + struct ks2_serdes *serdes, u32 lane) +{ + /* Bring lane out of reset */ + ks2_serdes_lane_reset(base, 0, lane); + + writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf, + serdes->rate_mode), + base + SERDES_LANE_CTL_STATUS_REG(lane)); + + /* Set NES bit if Loopback Enabled */ + if (serdes->loopback) + ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane), + 0x1, SERDES_LANE_LOOPBACK); +} + +int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes) +{ + int i; + int ret = 0; + + for (i = 0; i < ARRAY_SIZE(cfgs); i++) + if (serdes->clk == cfgs[i].clk && serdes->rate == cfgs[i].rate) + break; + + if (i >= ARRAY_SIZE(cfgs)) { + puts("Cannot find keystone SerDes configuration"); + return -EINVAL; + } + + ks2_serdes_init_cfg(base, &cfgs[i], num_lanes); + + ks2_serdes_cmu_comlane_enable(base, serdes); + for (i = 0; i < num_lanes; i++) + ks2_serdes_lane_enable(base, serdes, i); + + ks2_serdes_pll_enable(base, serdes); + + return ret; +} diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index e69de29bb2..e1678e63e6 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -0,0 +1,6 @@ +config DM_SPI + bool "Enable Driver Model for SPI drivers" + depends on DM + help + If you want to use driver model for SPI drivers, say Y. + To use legacy SPI drivers, say N. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f02c35a52c..eabbf27d4d 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -6,7 +6,14 @@ # # There are many options which enable SPI, so make this library available +ifdef CONFIG_DM_SPI +obj-y += spi-uclass.o +obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o +obj-$(CONFIG_SOFT_SPI) += soft_spi.o +else obj-y += spi.o +obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o +endif obj-$(CONFIG_EP93XX_SPI) += ep93xx_spi.o obj-$(CONFIG_ALTERA_SPI) += altera_spi.o @@ -30,11 +37,9 @@ obj-$(CONFIG_MXS_SPI) += mxs_spi.o obj-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o -obj-$(CONFIG_SOFT_SPI) += soft_spi.o obj-$(CONFIG_SH_SPI) += sh_spi.o obj-$(CONFIG_SH_QSPI) += sh_qspi.o obj-$(CONFIG_FSL_ESPI) += fsl_espi.o -obj-$(CONFIG_FDT_SPI) += fdt_spi.o obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index 2969184ee8..f078973531 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -6,6 +6,8 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <malloc.h> #include <spi.h> #include <fdtdec.h> @@ -19,176 +21,35 @@ DECLARE_GLOBAL_DATA_PTR; -/* Information about each SPI controller */ -struct spi_bus { +struct exynos_spi_platdata { enum periph_id periph_id; s32 frequency; /* Default clock frequency, -1 for none */ struct exynos_spi *regs; - int inited; /* 1 if this bus is ready for use */ - int node; uint deactivate_delay_us; /* Delay to wait after deactivate */ }; -/* A list of spi buses that we know about */ -static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; -static unsigned int bus_count; - -struct exynos_spi_slave { - struct spi_slave slave; +struct exynos_spi_priv { struct exynos_spi *regs; unsigned int freq; /* Default frequency */ unsigned int mode; enum periph_id periph_id; /* Peripheral ID for this device */ unsigned int fifo_size; int skip_preamble; - struct spi_bus *bus; /* Pointer to our SPI bus info */ ulong last_transaction_us; /* Time of last transaction end */ }; -static struct spi_bus *spi_get_bus(unsigned dev_index) -{ - if (dev_index < bus_count) - return &spi_bus[dev_index]; - debug("%s: invalid bus %d", __func__, dev_index); - - return NULL; -} - -static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave) -{ - return container_of(slave, struct exynos_spi_slave, slave); -} - -/** - * Setup the driver private data - * - * @param bus ID of the bus that the slave is attached to - * @param cs ID of the chip select connected to the slave - * @param max_hz Required spi frequency - * @param mode Required spi mode (clk polarity, clk phase and - * master or slave) - * @return new device or NULL - */ -struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct exynos_spi_slave *spi_slave; - struct spi_bus *bus; - - if (!spi_cs_is_valid(busnum, cs)) { - debug("%s: Invalid bus/chip select %d, %d\n", __func__, - busnum, cs); - return NULL; - } - - spi_slave = spi_alloc_slave(struct exynos_spi_slave, busnum, cs); - if (!spi_slave) { - debug("%s: Could not allocate spi_slave\n", __func__); - return NULL; - } - - bus = &spi_bus[busnum]; - spi_slave->bus = bus; - spi_slave->regs = bus->regs; - spi_slave->mode = mode; - spi_slave->periph_id = bus->periph_id; - if (bus->periph_id == PERIPH_ID_SPI1 || - bus->periph_id == PERIPH_ID_SPI2) - spi_slave->fifo_size = 64; - else - spi_slave->fifo_size = 256; - - spi_slave->skip_preamble = 0; - spi_slave->last_transaction_us = timer_get_us(); - - spi_slave->freq = bus->frequency; - if (max_hz) - spi_slave->freq = min(max_hz, spi_slave->freq); - - return &spi_slave->slave; -} - -/** - * Free spi controller - * - * @param slave Pointer to spi_slave to which controller has to - * communicate with - */ -void spi_free_slave(struct spi_slave *slave) -{ - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); - - free(spi_slave); -} - /** * Flush spi tx, rx fifos and reset the SPI controller * - * @param slave Pointer to spi_slave to which controller has to - * communicate with + * @param regs Pointer to SPI registers */ -static void spi_flush_fifo(struct spi_slave *slave) +static void spi_flush_fifo(struct exynos_spi *regs) { - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); - struct exynos_spi *regs = spi_slave->regs; - clrsetbits_le32(®s->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST); clrbits_le32(®s->ch_cfg, SPI_CH_RST); setbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); } -/** - * Initialize the spi base registers, set the required clock frequency and - * initialize the gpios - * - * @param slave Pointer to spi_slave to which controller has to - * communicate with - * @return zero on success else a negative value - */ -int spi_claim_bus(struct spi_slave *slave) -{ - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); - struct exynos_spi *regs = spi_slave->regs; - u32 reg = 0; - int ret; - - ret = set_spi_clk(spi_slave->periph_id, - spi_slave->freq); - if (ret < 0) { - debug("%s: Failed to setup spi clock\n", __func__); - return ret; - } - - exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE); - - spi_flush_fifo(slave); - - reg = readl(®s->ch_cfg); - reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L); - - if (spi_slave->mode & SPI_CPHA) - reg |= SPI_CH_CPHA_B; - - if (spi_slave->mode & SPI_CPOL) - reg |= SPI_CH_CPOL_L; - - writel(reg, ®s->ch_cfg); - writel(SPI_FB_DELAY_180, ®s->fb_clk); - - return 0; -} - -/** - * Reset the spi H/W and flush the tx and rx fifos - * - * @param slave Pointer to spi_slave to which controller has to - * communicate with - */ -void spi_release_bus(struct spi_slave *slave) -{ - spi_flush_fifo(slave); -} - static void spi_get_fifo_levels(struct exynos_spi *regs, int *rx_lvl, int *tx_lvl) { @@ -208,6 +69,8 @@ static void spi_get_fifo_levels(struct exynos_spi *regs, */ static void spi_request_bytes(struct exynos_spi *regs, int count, int step) { + debug("%s: regs=%p, count=%d, step=%d\n", __func__, regs, count, step); + /* For word address we need to swap bytes */ if (step == 4) { setbits_le32(®s->mode_cfg, @@ -230,10 +93,10 @@ static void spi_request_bytes(struct exynos_spi *regs, int count, int step) writel(count | SPI_PACKET_CNT_EN, ®s->pkt_cnt); } -static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, +static int spi_rx_tx(struct exynos_spi_priv *priv, int todo, void **dinp, void const **doutp, unsigned long flags) { - struct exynos_spi *regs = spi_slave->regs; + struct exynos_spi *regs = priv->regs; uchar *rxp = *dinp; const uchar *txp = *doutp; int rx_lvl, tx_lvl; @@ -245,8 +108,8 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, out_bytes = in_bytes = todo; - stopping = spi_slave->skip_preamble && (flags & SPI_XFER_END) && - !(spi_slave->mode & SPI_SLAVE); + stopping = priv->skip_preamble && (flags & SPI_XFER_END) && + !(priv->mode & SPI_SLAVE); /* * Try to transfer words if we can. This helps read performance at @@ -254,7 +117,7 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, */ step = 1; if (!((todo | (uintptr_t)rxp | (uintptr_t)txp) & 3) && - !spi_slave->skip_preamble) + !priv->skip_preamble) step = 4; /* @@ -279,7 +142,7 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, * Don't completely fill the txfifo, since we don't want our * rxfifo to overflow, and it may already contain data. */ - while (tx_lvl < spi_slave->fifo_size/2 && out_bytes) { + while (tx_lvl < priv->fifo_size/2 && out_bytes) { if (!txp) temp = -1; else if (step == 4) @@ -295,9 +158,9 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, if (rx_lvl >= step) { while (rx_lvl >= step) { temp = readl(®s->rx_data); - if (spi_slave->skip_preamble) { + if (priv->skip_preamble) { if (temp == SPI_PREAMBLE_END_BYTE) { - spi_slave->skip_preamble = 0; + priv->skip_preamble = 0; stopping = 0; } } else { @@ -326,7 +189,7 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, txp = NULL; spi_request_bytes(regs, toread, step); } - if (spi_slave->skip_preamble && get_timer(start) > 100) { + if (priv->skip_preamble && get_timer(start) > 100) { printf("SPI timeout: in_bytes=%d, out_bytes=%d, ", in_bytes, out_bytes); return -1; @@ -340,94 +203,29 @@ static int spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, } /** - * Transfer and receive data - * - * @param slave Pointer to spi_slave to which controller has to - * communicate with - * @param bitlen No of bits to tranfer or receive - * @param dout Pointer to transfer buffer - * @param din Pointer to receive buffer - * @param flags Flags for transfer begin and end - * @return zero on success else a negative value - */ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); - int upto, todo; - int bytelen; - int ret = 0; - - /* spi core configured to do 8 bit transfers */ - if (bitlen % 8) { - debug("Non byte aligned SPI transfer.\n"); - return -1; - } - - /* Start the transaction, if necessary. */ - if ((flags & SPI_XFER_BEGIN)) - spi_cs_activate(slave); - - /* - * Exynos SPI limits each transfer to 65535 transfers. To keep - * things simple, allow a maximum of 65532 bytes. We could allow - * more in word mode, but the performance difference is small. - */ - bytelen = bitlen / 8; - for (upto = 0; !ret && upto < bytelen; upto += todo) { - todo = min(bytelen - upto, (1 << 16) - 4); - ret = spi_rx_tx(spi_slave, todo, &din, &dout, flags); - if (ret) - break; - } - - /* Stop the transaction, if necessary. */ - if ((flags & SPI_XFER_END) && !(spi_slave->mode & SPI_SLAVE)) { - spi_cs_deactivate(slave); - if (spi_slave->skip_preamble) { - assert(!spi_slave->skip_preamble); - debug("Failed to complete premable transaction\n"); - ret = -1; - } - } - - return ret; -} - -/** - * Validates the bus and chip select numbers - * - * @param bus ID of the bus that the slave is attached to - * @param cs ID of the chip select connected to the slave - * @return one on success else zero - */ -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return spi_get_bus(bus) && cs == 0; -} - -/** * Activate the CS by driving it LOW * * @param slave Pointer to spi_slave to which controller has to * communicate with */ -void spi_cs_activate(struct spi_slave *slave) +static void spi_cs_activate(struct udevice *dev) { - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct udevice *bus = dev->parent; + struct exynos_spi_platdata *pdata = dev_get_platdata(bus); + struct exynos_spi_priv *priv = dev_get_priv(bus); /* If it's too soon to do another transaction, wait */ - if (spi_slave->bus->deactivate_delay_us && - spi_slave->last_transaction_us) { + if (pdata->deactivate_delay_us && + priv->last_transaction_us) { ulong delay_us; /* The delay completed so far */ - delay_us = timer_get_us() - spi_slave->last_transaction_us; - if (delay_us < spi_slave->bus->deactivate_delay_us) - udelay(spi_slave->bus->deactivate_delay_us - delay_us); + delay_us = timer_get_us() - priv->last_transaction_us; + if (delay_us < pdata->deactivate_delay_us) + udelay(pdata->deactivate_delay_us - delay_us); } - clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); - debug("Activate CS, bus %d\n", spi_slave->slave.bus); - spi_slave->skip_preamble = spi_slave->mode & SPI_PREAMBLE; + clrbits_le32(&priv->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Activate CS, bus '%s'\n", bus->name); + priv->skip_preamble = priv->mode & SPI_PREAMBLE; } /** @@ -436,148 +234,197 @@ void spi_cs_activate(struct spi_slave *slave) * @param slave Pointer to spi_slave to which controller has to * communicate with */ -void spi_cs_deactivate(struct spi_slave *slave) +static void spi_cs_deactivate(struct udevice *dev) { - struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct udevice *bus = dev->parent; + struct exynos_spi_platdata *pdata = dev_get_platdata(bus); + struct exynos_spi_priv *priv = dev_get_priv(bus); - setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + setbits_le32(&priv->regs->cs_reg, SPI_SLAVE_SIG_INACT); /* Remember time of this transaction so we can honour the bus delay */ - if (spi_slave->bus->deactivate_delay_us) - spi_slave->last_transaction_us = timer_get_us(); + if (pdata->deactivate_delay_us) + priv->last_transaction_us = timer_get_us(); - debug("Deactivate CS, bus %d\n", spi_slave->slave.bus); + debug("Deactivate CS, bus '%s'\n", bus->name); } -static inline struct exynos_spi *get_spi_base(int dev_index) +static int exynos_spi_ofdata_to_platdata(struct udevice *bus) { - if (dev_index < 3) - return (struct exynos_spi *)samsung_get_base_spi() + dev_index; - else - return (struct exynos_spi *)samsung_get_base_spi_isp() + - (dev_index - 3); -} + struct exynos_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; -/* - * Read the SPI config from the device tree node. - * - * @param blob FDT blob to read from - * @param node Node offset to read from - * @param bus SPI bus structure to fill with information - * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing - */ -#ifdef CONFIG_OF_CONTROL -static int spi_get_config(const void *blob, int node, struct spi_bus *bus) -{ - bus->node = node; - bus->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg"); - bus->periph_id = pinmux_decode_periph_id(blob, node); + plat->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg"); + plat->periph_id = pinmux_decode_periph_id(blob, node); - if (bus->periph_id == PERIPH_ID_NONE) { + if (plat->periph_id == PERIPH_ID_NONE) { debug("%s: Invalid peripheral ID %d\n", __func__, - bus->periph_id); + plat->periph_id); return -FDT_ERR_NOTFOUND; } /* Use 500KHz as a suitable default */ - bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", 500000); - bus->deactivate_delay_us = fdtdec_get_int(blob, node, + plat->deactivate_delay_us = fdtdec_get_int(blob, node, "spi-deactivate-delay", 0); + debug("%s: regs=%p, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", + __func__, plat->regs, plat->periph_id, plat->frequency, + plat->deactivate_delay_us); return 0; } -/* - * Process a list of nodes, adding them to our list of SPI ports. - * - * @param blob fdt blob - * @param node_list list of nodes to process (any <=0 are ignored) - * @param count number of nodes to process - * @param is_dvc 1 if these are DVC ports, 0 if standard I2C - * @return 0 if ok, -1 on error - */ -static int process_nodes(const void *blob, int node_list[], int count) +static int exynos_spi_probe(struct udevice *bus) { - int i; + struct exynos_spi_platdata *plat = dev_get_platdata(bus); + struct exynos_spi_priv *priv = dev_get_priv(bus); - /* build the i2c_controllers[] for each controller */ - for (i = 0; i < count; i++) { - int node = node_list[i]; - struct spi_bus *bus; + priv->regs = plat->regs; + if (plat->periph_id == PERIPH_ID_SPI1 || + plat->periph_id == PERIPH_ID_SPI2) + priv->fifo_size = 64; + else + priv->fifo_size = 256; - if (node <= 0) - continue; + priv->skip_preamble = 0; + priv->last_transaction_us = timer_get_us(); + priv->freq = plat->frequency; + priv->periph_id = plat->periph_id; - bus = &spi_bus[i]; - if (spi_get_config(blob, node, bus)) { - printf("exynos spi_init: failed to decode bus %d\n", - i); - return -1; - } + return 0; +} - debug("spi: controller bus %d at %p, periph_id %d\n", - i, bus->regs, bus->periph_id); - bus->inited = 1; - bus_count++; - } +static int exynos_spi_claim_bus(struct udevice *bus) +{ + struct exynos_spi_priv *priv = dev_get_priv(bus); + + exynos_pinmux_config(priv->periph_id, PINMUX_FLAG_NONE); + spi_flush_fifo(priv->regs); + + writel(SPI_FB_DELAY_180, &priv->regs->fb_clk); return 0; } -#endif -/** - * Set up a new SPI slave for an fdt node - * - * @param blob Device tree blob - * @param node SPI peripheral node to use - * @return 0 if ok, -1 on error - */ -struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node, - int spi_node) +static int exynos_spi_release_bus(struct udevice *bus) { - struct spi_bus *bus; - unsigned int i; + struct exynos_spi_priv *priv = dev_get_priv(bus); + + spi_flush_fifo(priv->regs); + + return 0; +} + +static int exynos_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev->parent; + struct exynos_spi_priv *priv = dev_get_priv(bus); + int upto, todo; + int bytelen; + int ret = 0; + + /* spi core configured to do 8 bit transfers */ + if (bitlen % 8) { + debug("Non byte aligned SPI transfer.\n"); + return -1; + } + + /* Start the transaction, if necessary. */ + if ((flags & SPI_XFER_BEGIN)) + spi_cs_activate(dev); + + /* + * Exynos SPI limits each transfer to 65535 transfers. To keep + * things simple, allow a maximum of 65532 bytes. We could allow + * more in word mode, but the performance difference is small. + */ + bytelen = bitlen / 8; + for (upto = 0; !ret && upto < bytelen; upto += todo) { + todo = min(bytelen - upto, (1 << 16) - 4); + ret = spi_rx_tx(priv, todo, &din, &dout, flags); + if (ret) + break; + } - for (i = 0, bus = spi_bus; i < bus_count; i++, bus++) { - if (bus->node == spi_node) - return spi_base_setup_slave_fdt(blob, i, slave_node); + /* Stop the transaction, if necessary. */ + if ((flags & SPI_XFER_END) && !(priv->mode & SPI_SLAVE)) { + spi_cs_deactivate(dev); + if (priv->skip_preamble) { + assert(!priv->skip_preamble); + debug("Failed to complete premable transaction\n"); + ret = -1; + } } - debug("%s: Failed to find bus node %d\n", __func__, spi_node); - return NULL; + return ret; } -/* Sadly there is no error return from this function */ -void spi_init(void) +static int exynos_spi_set_speed(struct udevice *bus, uint speed) { - int count; + struct exynos_spi_platdata *plat = bus->platdata; + struct exynos_spi_priv *priv = dev_get_priv(bus); + int ret; -#ifdef CONFIG_OF_CONTROL - int node_list[EXYNOS5_SPI_NUM_CONTROLLERS]; - const void *blob = gd->fdt_blob; + if (speed > plat->frequency) + speed = plat->frequency; + ret = set_spi_clk(priv->periph_id, speed); + if (ret) + return ret; + priv->freq = speed; + debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq); + + return 0; +} - count = fdtdec_find_aliases_for_id(blob, "spi", - COMPAT_SAMSUNG_EXYNOS_SPI, node_list, - EXYNOS5_SPI_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count)) - return; +static int exynos_spi_set_mode(struct udevice *bus, uint mode) +{ + struct exynos_spi_priv *priv = dev_get_priv(bus); + uint32_t reg; -#else - struct spi_bus *bus; + reg = readl(&priv->regs->ch_cfg); + reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L); - for (count = 0; count < EXYNOS5_SPI_NUM_CONTROLLERS; count++) { - bus = &spi_bus[count]; - bus->regs = get_spi_base(count); - bus->periph_id = PERIPH_ID_SPI0 + count; + if (mode & SPI_CPHA) + reg |= SPI_CH_CPHA_B; - /* Although Exynos5 supports upto 50Mhz speed, - * we are setting it to 10Mhz for safe side - */ - bus->frequency = 10000000; - bus->inited = 1; - bus->node = 0; - bus_count = EXYNOS5_SPI_NUM_CONTROLLERS; - } -#endif + if (mode & SPI_CPOL) + reg |= SPI_CH_CPOL_L; + + writel(reg, &priv->regs->ch_cfg); + priv->mode = mode; + debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); + + return 0; } + +static const struct dm_spi_ops exynos_spi_ops = { + .claim_bus = exynos_spi_claim_bus, + .release_bus = exynos_spi_release_bus, + .xfer = exynos_spi_xfer, + .set_speed = exynos_spi_set_speed, + .set_mode = exynos_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id exynos_spi_ids[] = { + { .compatible = "samsung,exynos-spi" }, + { } +}; + +U_BOOT_DRIVER(exynos_spi) = { + .name = "exynos_spi", + .id = UCLASS_SPI, + .of_match = exynos_spi_ids, + .ops = &exynos_spi_ops, + .ofdata_to_platdata = exynos_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct exynos_spi_platdata), + .priv_auto_alloc_size = sizeof(struct exynos_spi_priv), + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .probe = exynos_spi_probe, +}; diff --git a/drivers/spi/fdt_spi.c b/drivers/spi/fdt_spi.c deleted file mode 100644 index 58f139a54e..0000000000 --- a/drivers/spi/fdt_spi.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Common fdt based SPI driver front end - * - * Copyright (c) 2013 NVIDIA Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/clock.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra20/tegra20_sflash.h> -#include <asm/arch-tegra20/tegra20_slink.h> -#include <asm/arch-tegra114/tegra114_spi.h> -#include <spi.h> -#include <fdtdec.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct fdt_spi_driver { - int compat; - int max_ctrls; - int (*init)(int *node_list, int count); - int (*claim_bus)(struct spi_slave *slave); - int (*release_bus)(struct spi_slave *slave); - int (*cs_is_valid)(unsigned int bus, unsigned int cs); - struct spi_slave *(*setup_slave)(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); - void (*free_slave)(struct spi_slave *slave); - void (*cs_activate)(struct spi_slave *slave); - void (*cs_deactivate)(struct spi_slave *slave); - int (*xfer)(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags); -}; - -static struct fdt_spi_driver fdt_spi_drivers[] = { -#ifdef CONFIG_TEGRA20_SFLASH - { - .compat = COMPAT_NVIDIA_TEGRA20_SFLASH, - .max_ctrls = 1, - .init = tegra20_spi_init, - .claim_bus = tegra20_spi_claim_bus, - .cs_is_valid = tegra20_spi_cs_is_valid, - .setup_slave = tegra20_spi_setup_slave, - .free_slave = tegra20_spi_free_slave, - .cs_activate = tegra20_spi_cs_activate, - .cs_deactivate = tegra20_spi_cs_deactivate, - .xfer = tegra20_spi_xfer, - }, -#endif -#ifdef CONFIG_TEGRA20_SLINK - { - .compat = COMPAT_NVIDIA_TEGRA20_SLINK, - .max_ctrls = CONFIG_TEGRA_SLINK_CTRLS, - .init = tegra30_spi_init, - .claim_bus = tegra30_spi_claim_bus, - .cs_is_valid = tegra30_spi_cs_is_valid, - .setup_slave = tegra30_spi_setup_slave, - .free_slave = tegra30_spi_free_slave, - .cs_activate = tegra30_spi_cs_activate, - .cs_deactivate = tegra30_spi_cs_deactivate, - .xfer = tegra30_spi_xfer, - }, -#endif -#ifdef CONFIG_TEGRA114_SPI - { - .compat = COMPAT_NVIDIA_TEGRA114_SPI, - .max_ctrls = CONFIG_TEGRA114_SPI_CTRLS, - .init = tegra114_spi_init, - .claim_bus = tegra114_spi_claim_bus, - .cs_is_valid = tegra114_spi_cs_is_valid, - .setup_slave = tegra114_spi_setup_slave, - .free_slave = tegra114_spi_free_slave, - .cs_activate = tegra114_spi_cs_activate, - .cs_deactivate = tegra114_spi_cs_deactivate, - .xfer = tegra114_spi_xfer, - }, -#endif -}; - -static struct fdt_spi_driver *driver; - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - if (!driver) - return 0; - else if (!driver->cs_is_valid) - return 1; - else - return driver->cs_is_valid(bus, cs); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - if (!driver || !driver->setup_slave) - return NULL; - - return driver->setup_slave(bus, cs, max_hz, mode); -} - -void spi_free_slave(struct spi_slave *slave) -{ - if (driver && driver->free_slave) - return driver->free_slave(slave); -} - -static int spi_init_driver(struct fdt_spi_driver *driver) -{ - int count; - int node_list[driver->max_ctrls]; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "spi", - driver->compat, - node_list, - driver->max_ctrls); - return driver->init(node_list, count); -} - -void spi_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(fdt_spi_drivers); i++) { - driver = &fdt_spi_drivers[i]; - if (!spi_init_driver(driver)) - break; - } - if (i == ARRAY_SIZE(fdt_spi_drivers)) - driver = NULL; -} - -int spi_claim_bus(struct spi_slave *slave) -{ - if (!driver) - return 1; - if (!driver->claim_bus) - return 0; - - return driver->claim_bus(slave); -} - -void spi_release_bus(struct spi_slave *slave) -{ - if (driver && driver->release_bus) - driver->release_bus(slave); -} - -void spi_cs_activate(struct spi_slave *slave) -{ - if (driver && driver->cs_activate) - driver->cs_activate(slave); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - if (driver && driver->cs_deactivate) - driver->cs_deactivate(slave); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags) -{ - if (!driver || !driver->xfer) - return -1; - - return driver->xfer(slave, bitlen, data_out, data_in, flags); -} diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 3d58bcc1b9..e7b0982fb6 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -12,23 +12,30 @@ #include <malloc.h> #include <spi.h> #include <asm/io.h> -#include <asm/arch/kirkwood.h> -#include <asm/arch/spi.h> +#include <asm/arch/soc.h> +#ifdef CONFIG_KIRKWOOD #include <asm/arch/mpp.h> +#endif +#include <asm/arch-mvebu/spi.h> -static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE; +static struct kwspi_registers *spireg = + (struct kwspi_registers *)MVEBU_SPI_BASE; +#ifdef CONFIG_KIRKWOOD static u32 cs_spi_mpp_back[2]; +#endif struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct spi_slave *slave; u32 data; +#ifdef CONFIG_KIRKWOOD static const u32 kwspi_mpp_config[2][2] = { { MPP0_SPI_SCn, 0 }, /* if cs == 0 */ { MPP7_SPI_SCn, 0 } /* if cs != 0 */ }; +#endif if (!spi_cs_is_valid(bus, cs)) return NULL; @@ -51,15 +58,19 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause); writel(KWSPI_IRQMASK, &spireg->irq_mask); +#ifdef CONFIG_KIRKWOOD /* program mpp registers to select SPI_CSn */ kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back); +#endif return slave; } void spi_free_slave(struct spi_slave *slave) { +#ifdef CONFIG_KIRKWOOD kirkwood_mpp_conf(cs_spi_mpp_back, NULL); +#endif free(slave); } diff --git a/drivers/spi/sandbox_spi.c b/drivers/spi/sandbox_spi.c index 12e9bdad38..e717424db8 100644 --- a/drivers/spi/sandbox_spi.c +++ b/drivers/spi/sandbox_spi.c @@ -9,26 +9,23 @@ */ #include <common.h> +#include <dm.h> #include <malloc.h> #include <spi.h> +#include <spi_flash.h> #include <os.h> #include <asm/errno.h> #include <asm/spi.h> #include <asm/state.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_SPI_IDLE_VAL # define CONFIG_SPI_IDLE_VAL 0xFF #endif -struct sandbox_spi_slave { - struct spi_slave slave; - const struct sandbox_spi_emu_ops *ops; - void *priv; -}; - -#define to_sandbox_spi_slave(s) container_of(s, struct sandbox_spi_slave, slave) - const char *sandbox_spi_parse_spec(const char *arg, unsigned long *bus, unsigned long *cs) { @@ -45,120 +42,52 @@ const char *sandbox_spi_parse_spec(const char *arg, unsigned long *bus, return endp + 1; } -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return bus < CONFIG_SANDBOX_SPI_MAX_BUS && - cs < CONFIG_SANDBOX_SPI_MAX_CS; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave); - - debug("sandbox_spi: activating CS\n"); - if (sss->ops->cs_activate) - sss->ops->cs_activate(sss->priv); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave); - - debug("sandbox_spi: deactivating CS\n"); - if (sss->ops->cs_deactivate) - sss->ops->cs_deactivate(sss->priv); -} - -void spi_init(void) -{ -} - -void spi_set_speed(struct spi_slave *slave, uint hz) +__weak int sandbox_spi_get_emul(struct sandbox_state *state, + struct udevice *bus, struct udevice *slave, + struct udevice **emulp) { + return -ENOENT; } -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static int sandbox_spi_xfer(struct udevice *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { - struct sandbox_spi_slave *sss; + struct udevice *bus = slave->parent; struct sandbox_state *state = state_get_current(); - const char *spec; - - if (!spi_cs_is_valid(bus, cs)) { - debug("sandbox_spi: Invalid SPI bus/cs\n"); - return NULL; - } - - sss = spi_alloc_slave(struct sandbox_spi_slave, bus, cs); - if (!sss) { - debug("sandbox_spi: Out of memory\n"); - return NULL; - } - - spec = state->spi[bus][cs].spec; - sss->ops = state->spi[bus][cs].ops; - if (!spec || !sss->ops || sss->ops->setup(&sss->priv, spec)) { - free(sss); - printf("sandbox_spi: unable to locate a slave client\n"); - return NULL; - } - - return &sss->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave); - - debug("sandbox_spi: releasing slave\n"); - - if (sss->ops->free) - sss->ops->free(sss->priv); - - free(sss); -} - -static int spi_bus_claim_cnt[CONFIG_SANDBOX_SPI_MAX_BUS]; - -int spi_claim_bus(struct spi_slave *slave) -{ - if (spi_bus_claim_cnt[slave->bus]++) { - printf("sandbox_spi: error: bus already claimed: %d!\n", - spi_bus_claim_cnt[slave->bus]); - } - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - if (--spi_bus_claim_cnt[slave->bus]) { - printf("sandbox_spi: error: bus freed too often: %d!\n", - spi_bus_claim_cnt[slave->bus]); - } -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave); + struct dm_spi_emul_ops *ops; + struct udevice *emul; uint bytes = bitlen / 8, i; - int ret = 0; + int ret; u8 *tx = (void *)dout, *rx = din; + uint busnum, cs; if (bitlen == 0) - goto done; + return 0; /* we can only do 8 bit transfers */ if (bitlen % 8) { printf("sandbox_spi: xfer: invalid bitlen size %u; needs to be 8bit\n", bitlen); - flags |= SPI_XFER_END; - goto done; + return -EINVAL; } - if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + busnum = bus->seq; + cs = spi_chip_select(slave); + if (busnum >= CONFIG_SANDBOX_SPI_MAX_BUS || + cs >= CONFIG_SANDBOX_SPI_MAX_CS) { + printf("%s: busnum=%u, cs=%u: out of range\n", __func__, + busnum, cs); + return -ENOENT; + } + ret = sandbox_spi_get_emul(state, bus, slave, &emul); + if (ret) { + printf("%s: busnum=%u, cs=%u: no emulation available (err=%d)\n", + __func__, busnum, cs, ret); + return -ENOENT; + } + ret = device_probe(emul); + if (ret) + return ret; /* make sure rx/tx buffers are full so clients can assume */ if (!tx) { @@ -178,12 +107,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } } - debug("sandbox_spi: xfer: bytes = %u\n tx:", bytes); - for (i = 0; i < bytes; ++i) - debug(" %u:%02x", i, tx[i]); - debug("\n"); - - ret = sss->ops->xfer(sss->priv, tx, rx, bytes); + ops = spi_emul_get_ops(emul); + ret = ops->xfer(emul, bitlen, dout, din, flags); debug("sandbox_spi: xfer: got back %i (that's %s)\n rx:", ret, ret ? "bad" : "good"); @@ -196,22 +121,45 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (rx != din) free(rx); - done: - if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); - return ret; } -/** - * Set up a new SPI slave for an fdt node - * - * @param blob Device tree blob - * @param node SPI peripheral node to use - * @return 0 if ok, -1 on error - */ -struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node, - int spi_node) +static int sandbox_spi_set_speed(struct udevice *bus, uint speed) +{ + return 0; +} + +static int sandbox_spi_set_mode(struct udevice *bus, uint mode) +{ + return 0; +} + +static int sandbox_cs_info(struct udevice *bus, uint cs, + struct spi_cs_info *info) { - return NULL; + /* Always allow activity on CS 0 */ + if (cs >= 1) + return -ENODEV; + + return 0; } + +static const struct dm_spi_ops sandbox_spi_ops = { + .xfer = sandbox_spi_xfer, + .set_speed = sandbox_spi_set_speed, + .set_mode = sandbox_spi_set_mode, + .cs_info = sandbox_cs_info, +}; + +static const struct udevice_id sandbox_spi_ids[] = { + { .compatible = "sandbox,spi" }, + { } +}; + +U_BOOT_DRIVER(spi_sandbox) = { + .name = "spi_sandbox", + .id = UCLASS_SPI, + .of_match = sandbox_spi_ids, + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .ops = &sandbox_spi_ops, +}; diff --git a/drivers/spi/soft_spi.c b/drivers/spi/soft_spi.c index c969be31eb..558803618a 100644 --- a/drivers/spi/soft_spi.c +++ b/drivers/spi/soft_spi.c @@ -1,4 +1,6 @@ /* + * Copyright (c) 2014 Google, Inc + * * (C) Copyright 2002 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. * @@ -9,94 +11,81 @@ */ #include <common.h> -#include <spi.h> - +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> #include <malloc.h> +#include <spi.h> +#include <asm/gpio.h> -/*----------------------------------------------------------------------- - * Definitions - */ +DECLARE_GLOBAL_DATA_PTR; -#ifdef DEBUG_SPI -#define PRINTD(fmt,args...) printf (fmt ,##args) -#else -#define PRINTD(fmt,args...) -#endif +struct soft_spi_platdata { + struct fdt_gpio_state cs; + struct fdt_gpio_state sclk; + struct fdt_gpio_state mosi; + struct fdt_gpio_state miso; + int spi_delay_us; +}; -struct soft_spi_slave { - struct spi_slave slave; +struct soft_spi_priv { unsigned int mode; }; -static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave) +static int soft_spi_scl(struct udevice *dev, int bit) { - return container_of(slave, struct soft_spi_slave, slave); -} + struct soft_spi_platdata *plat = dev->platdata; + struct soft_spi_priv *priv = dev_get_priv(dev); -/*=====================================================================*/ -/* Public Functions */ -/*=====================================================================*/ + gpio_set_value(plat->sclk.gpio, priv->mode & SPI_CPOL ? bit : !bit); -/*----------------------------------------------------------------------- - * Initialization - */ -void spi_init (void) -{ -#ifdef SPI_INIT - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; - - SPI_INIT; -#endif + return 0; } -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static int soft_spi_sda(struct udevice *dev, int bit) { - struct soft_spi_slave *ss; + struct soft_spi_platdata *plat = dev->platdata; - if (!spi_cs_is_valid(bus, cs)) - return NULL; + gpio_set_value(plat->mosi.gpio, bit); - ss = spi_alloc_slave(struct soft_spi_slave, bus, cs); - if (!ss) - return NULL; + return 0; +} - ss->mode = mode; +static int soft_spi_cs_activate(struct udevice *dev) +{ + struct soft_spi_platdata *plat = dev->platdata; + struct soft_spi_priv *priv = dev_get_priv(dev); - /* TODO: Use max_hz to limit the SCK rate */ + gpio_set_value(plat->cs.gpio, !(priv->mode & SPI_CS_HIGH)); + gpio_set_value(plat->sclk.gpio, priv->mode & SPI_CPOL); + gpio_set_value(plat->cs.gpio, priv->mode & SPI_CS_HIGH); - return &ss->slave; + return 0; } -void spi_free_slave(struct spi_slave *slave) +static int soft_spi_cs_deactivate(struct udevice *dev) { - struct soft_spi_slave *ss = to_soft_spi(slave); + struct soft_spi_platdata *plat = dev->platdata; + struct soft_spi_priv *priv = dev_get_priv(dev); - free(ss); + gpio_set_value(plat->cs.gpio, !(priv->mode & SPI_CS_HIGH)); + + return 0; } -int spi_claim_bus(struct spi_slave *slave) +static int soft_spi_claim_bus(struct udevice *dev) { -#ifdef CONFIG_SYS_IMMR - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; -#endif - struct soft_spi_slave *ss = to_soft_spi(slave); - /* * Make sure the SPI clock is in idle state as defined for * this slave. */ - if (ss->mode & SPI_CPOL) - SPI_SCL(1); - else - SPI_SCL(0); - - return 0; + return soft_spi_scl(dev, 0); } -void spi_release_bus(struct spi_slave *slave) +static int soft_spi_release_bus(struct udevice *dev) { /* Nothing to do */ + return 0; } /*----------------------------------------------------------------------- @@ -111,28 +100,27 @@ void spi_release_bus(struct spi_slave *slave) * input data overwrites the output data (since both are buffered by * temporary variables, this is OK). */ -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) +static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { -#ifdef CONFIG_SYS_IMMR - volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; -#endif - struct soft_spi_slave *ss = to_soft_spi(slave); + struct soft_spi_priv *priv = dev_get_priv(dev); + struct soft_spi_platdata *plat = dev->platdata; uchar tmpdin = 0; uchar tmpdout = 0; const u8 *txd = dout; u8 *rxd = din; - int cpol = ss->mode & SPI_CPOL; - int cpha = ss->mode & SPI_CPHA; + int cpol = priv->mode & SPI_CPOL; + int cpha = priv->mode & SPI_CPHA; unsigned int j; - PRINTD("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", - slave->bus, slave->cs, *(uint *)txd, *(uint *)rxd, bitlen); + debug("spi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n", + dev->parent->name, dev->name, *(uint *)txd, *(uint *)rxd, + bitlen); if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + soft_spi_cs_activate(dev); - for(j = 0; j < bitlen; j++) { + for (j = 0; j < bitlen; j++) { /* * Check if it is time to work on a new byte. */ @@ -141,7 +129,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, tmpdout = *txd++; else tmpdout = 0; - if(j != 0) { + if (j != 0) { if (rxd) *rxd++ = tmpdin; } @@ -149,19 +137,19 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, } if (!cpha) - SPI_SCL(!cpol); - SPI_SDA(tmpdout & 0x80); - SPI_DELAY; + soft_spi_scl(dev, !cpol); + soft_spi_sda(dev, tmpdout & 0x80); + udelay(plat->spi_delay_us); if (cpha) - SPI_SCL(!cpol); + soft_spi_scl(dev, !cpol); else - SPI_SCL(cpol); + soft_spi_scl(dev, cpol); tmpdin <<= 1; - tmpdin |= SPI_READ; + tmpdin |= gpio_get_value(plat->miso.gpio); tmpdout <<= 1; - SPI_DELAY; + udelay(plat->spi_delay_us); if (cpha) - SPI_SCL(cpol); + soft_spi_scl(dev, cpol); } /* * If the number of bits isn't a multiple of 8, shift the last @@ -175,7 +163,90 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + soft_spi_cs_deactivate(dev); - return(0); + return 0; } + +static int soft_spi_set_speed(struct udevice *dev, unsigned int speed) +{ + /* Accept any speed */ + return 0; +} + +static int soft_spi_set_mode(struct udevice *dev, unsigned int mode) +{ + struct soft_spi_priv *priv = dev_get_priv(dev); + + priv->mode = mode; + + return 0; +} + +static int soft_spi_child_pre_probe(struct udevice *dev) +{ + struct spi_slave *slave = dev_get_parentdata(dev); + + slave->dev = dev; + return spi_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, slave); +} + +static const struct dm_spi_ops soft_spi_ops = { + .claim_bus = soft_spi_claim_bus, + .release_bus = soft_spi_release_bus, + .xfer = soft_spi_xfer, + .set_speed = soft_spi_set_speed, + .set_mode = soft_spi_set_mode, +}; + +static int soft_spi_ofdata_to_platdata(struct udevice *dev) +{ + struct soft_spi_platdata *plat = dev->platdata; + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + + if (fdtdec_decode_gpio(blob, node, "cs-gpio", &plat->cs) || + fdtdec_decode_gpio(blob, node, "sclk-gpio", &plat->sclk) || + fdtdec_decode_gpio(blob, node, "mosi-gpio", &plat->mosi) || + fdtdec_decode_gpio(blob, node, "miso-gpio", &plat->miso)) + return -EINVAL; + plat->spi_delay_us = fdtdec_get_int(blob, node, "spi-delay-us", 0); + + return 0; +} + +static int soft_spi_probe(struct udevice *dev) +{ + struct spi_slave *slave = dev_get_parentdata(dev); + struct soft_spi_platdata *plat = dev->platdata; + + gpio_request(plat->cs.gpio, "soft_spi_cs"); + gpio_request(plat->sclk.gpio, "soft_spi_sclk"); + gpio_request(plat->mosi.gpio, "soft_spi_mosi"); + gpio_request(plat->miso.gpio, "soft_spi_miso"); + + gpio_direction_output(plat->sclk.gpio, slave->mode & SPI_CPOL); + gpio_direction_output(plat->mosi.gpio, 1); + gpio_direction_input(plat->miso.gpio); + gpio_direction_output(plat->cs.gpio, !(slave->mode & SPI_CS_HIGH)); + + return 0; +} + +static const struct udevice_id soft_spi_ids[] = { + { .compatible = "u-boot,soft-spi" }, + { } +}; + +U_BOOT_DRIVER(soft_spi) = { + .name = "soft_spi", + .id = UCLASS_SPI, + .of_match = soft_spi_ids, + .ops = &soft_spi_ops, + .ofdata_to_platdata = soft_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct soft_spi_platdata), + .priv_auto_alloc_size = sizeof(struct soft_spi_priv), + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .probe = soft_spi_probe, + .child_pre_probe = soft_spi_child_pre_probe, +}; diff --git a/drivers/spi/soft_spi_legacy.c b/drivers/spi/soft_spi_legacy.c new file mode 100644 index 0000000000..941daa730b --- /dev/null +++ b/drivers/spi/soft_spi_legacy.c @@ -0,0 +1,176 @@ +/* + * (C) Copyright 2002 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * + * Influenced by code from: + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi.h> + +#include <malloc.h> + +/*----------------------------------------------------------------------- + * Definitions + */ + +#ifdef DEBUG_SPI +#define PRINTD(fmt,args...) printf (fmt ,##args) +#else +#define PRINTD(fmt,args...) +#endif + +struct soft_spi_slave { + struct spi_slave slave; + unsigned int mode; +}; + +static inline struct soft_spi_slave *to_soft_spi(struct spi_slave *slave) +{ + return container_of(slave, struct soft_spi_slave, slave); +} + +/*=====================================================================*/ +/* Public Functions */ +/*=====================================================================*/ + +/*----------------------------------------------------------------------- + * Initialization + */ +void spi_init (void) +{ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct soft_spi_slave *ss; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + ss = spi_alloc_slave(struct soft_spi_slave, bus, cs); + if (!ss) + return NULL; + + ss->mode = mode; + + /* TODO: Use max_hz to limit the SCK rate */ + + return &ss->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct soft_spi_slave *ss = to_soft_spi(slave); + + free(ss); +} + +int spi_claim_bus(struct spi_slave *slave) +{ +#ifdef CONFIG_SYS_IMMR + volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; +#endif + struct soft_spi_slave *ss = to_soft_spi(slave); + + /* + * Make sure the SPI clock is in idle state as defined for + * this slave. + */ + if (ss->mode & SPI_CPOL) + SPI_SCL(1); + else + SPI_SCL(0); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + /* Nothing to do */ +} + +/*----------------------------------------------------------------------- + * SPI transfer + * + * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks + * "bitlen" bits in the SPI MISO port. That's just the way SPI works. + * + * The source of the outgoing bits is the "dout" parameter and the + * destination of the input bits is the "din" parameter. Note that "dout" + * and "din" can point to the same memory location, in which case the + * input data overwrites the output data (since both are buffered by + * temporary variables, this is OK). + */ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ +#ifdef CONFIG_SYS_IMMR + volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; +#endif + struct soft_spi_slave *ss = to_soft_spi(slave); + uchar tmpdin = 0; + uchar tmpdout = 0; + const u8 *txd = dout; + u8 *rxd = din; + int cpol = ss->mode & SPI_CPOL; + int cpha = ss->mode & SPI_CPHA; + unsigned int j; + + PRINTD("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", + slave->bus, slave->cs, *(uint *)txd, *(uint *)rxd, bitlen); + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + for(j = 0; j < bitlen; j++) { + /* + * Check if it is time to work on a new byte. + */ + if ((j % 8) == 0) { + if (txd) + tmpdout = *txd++; + else + tmpdout = 0; + if(j != 0) { + if (rxd) + *rxd++ = tmpdin; + } + tmpdin = 0; + } + + if (!cpha) + SPI_SCL(!cpol); + SPI_SDA(tmpdout & 0x80); + SPI_DELAY; + if (cpha) + SPI_SCL(!cpol); + else + SPI_SCL(cpol); + tmpdin <<= 1; + tmpdin |= SPI_READ; + tmpdout <<= 1; + SPI_DELAY; + if (cpha) + SPI_SCL(cpol); + } + /* + * If the number of bits isn't a multiple of 8, shift the last + * bits over to left-justify them. Then store the last byte + * read in. + */ + if (rxd) { + if ((bitlen % 8) != 0) + tmpdin <<= 8 - (bitlen % 8); + *rxd++ = tmpdin; + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return(0); +} diff --git a/drivers/spi/spi-emul-uclass.c b/drivers/spi/spi-emul-uclass.c new file mode 100644 index 0000000000..b436a0e99f --- /dev/null +++ b/drivers/spi/spi-emul-uclass.c @@ -0,0 +1,15 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <spi.h> +#include <spi_flash.h> + +UCLASS_DRIVER(spi_emul) = { + .id = UCLASS_SPI_EMUL, + .name = "spi_emul", +}; diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c new file mode 100644 index 0000000000..13c6b77d73 --- /dev/null +++ b/drivers/spi/spi-uclass.c @@ -0,0 +1,390 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> +#include <spi.h> +#include <dm/device-internal.h> +#include <dm/uclass-internal.h> +#include <dm/root.h> +#include <dm/lists.h> +#include <dm/util.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int spi_set_speed_mode(struct udevice *bus, int speed, int mode) +{ + struct dm_spi_ops *ops; + int ret; + + ops = spi_get_ops(bus); + if (ops->set_speed) + ret = ops->set_speed(bus, speed); + else + ret = -EINVAL; + if (ret) { + printf("Cannot set speed (err=%d)\n", ret); + return ret; + } + + if (ops->set_mode) + ret = ops->set_mode(bus, mode); + else + ret = -EINVAL; + if (ret) { + printf("Cannot set mode (err=%d)\n", ret); + return ret; + } + + return 0; +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct udevice *dev = slave->dev; + struct udevice *bus = dev->parent; + struct dm_spi_ops *ops = spi_get_ops(bus); + struct dm_spi_bus *spi = bus->uclass_priv; + int speed; + int ret; + + speed = slave->max_hz; + if (spi->max_hz) { + if (speed) + speed = min(speed, spi->max_hz); + else + speed = spi->max_hz; + } + if (!speed) + speed = 100000; + ret = spi_set_speed_mode(bus, speed, slave->mode); + if (ret) + return ret; + + return ops->claim_bus ? ops->claim_bus(bus) : 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct udevice *dev = slave->dev; + struct udevice *bus = dev->parent; + struct dm_spi_ops *ops = spi_get_ops(bus); + + if (ops->release_bus) + ops->release_bus(bus); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *dev = slave->dev; + struct udevice *bus = dev->parent; + + if (bus->uclass->uc_drv->id != UCLASS_SPI) + return -EOPNOTSUPP; + + return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags); +} + +int spi_post_bind(struct udevice *dev) +{ + /* Scan the bus for devices */ + return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); +} + +int spi_post_probe(struct udevice *dev) +{ + struct dm_spi_bus *spi = dev->uclass_priv; + + spi->max_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "spi-max-frequency", 0); + + return 0; +} + +int spi_chip_select(struct udevice *dev) +{ + struct spi_slave *slave = dev_get_parentdata(dev); + + return slave ? slave->cs : -ENOENT; +} + +/** + * spi_find_chip_select() - Find the slave attached to chip select + * + * @bus: SPI bus to search + * @cs: Chip select to look for + * @devp: Returns the slave device if found + * @return 0 if found, -ENODEV on error + */ +static int spi_find_chip_select(struct udevice *bus, int cs, + struct udevice **devp) +{ + struct udevice *dev; + + for (device_find_first_child(bus, &dev); dev; + device_find_next_child(&dev)) { + struct spi_slave store; + struct spi_slave *slave = dev_get_parentdata(dev); + + if (!slave) { + slave = &store; + spi_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, + slave); + } + debug("%s: slave=%p, cs=%d\n", __func__, slave, + slave ? slave->cs : -1); + if (slave && slave->cs == cs) { + *devp = dev; + return 0; + } + } + + return -ENODEV; +} + +int spi_cs_is_valid(unsigned int busnum, unsigned int cs) +{ + struct spi_cs_info info; + struct udevice *bus; + int ret; + + ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus); + if (ret) { + debug("%s: No bus %d\n", __func__, busnum); + return ret; + } + + return spi_cs_info(bus, cs, &info); +} + +int spi_cs_info(struct udevice *bus, uint cs, struct spi_cs_info *info) +{ + struct spi_cs_info local_info; + struct dm_spi_ops *ops; + int ret; + + if (!info) + info = &local_info; + + /* If there is a device attached, return it */ + info->dev = NULL; + ret = spi_find_chip_select(bus, cs, &info->dev); + if (!ret) + return 0; + + /* + * Otherwise ask the driver. For the moment we don't have CS info. + * When we do we could provide the driver with a helper function + * to figure out what chip selects are valid, or just handle the + * request. + */ + ops = spi_get_ops(bus); + if (ops->cs_info) + return ops->cs_info(bus, cs, info); + + /* + * We could assume there is at least one valid chip select, but best + * to be sure and return an error in this case. The driver didn't + * care enough to tell us. + */ + return -ENODEV; +} + +int spi_bind_device(struct udevice *bus, int cs, const char *drv_name, + const char *dev_name, struct udevice **devp) +{ + struct driver *drv; + int ret; + + drv = lists_driver_lookup_name(drv_name); + if (!drv) { + printf("Cannot find driver '%s'\n", drv_name); + return -ENOENT; + } + ret = device_bind(bus, drv, dev_name, NULL, -1, devp); + if (ret) { + printf("Cannot create device named '%s' (err=%d)\n", + dev_name, ret); + return ret; + } + + return 0; +} + +int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp, + struct udevice **devp) +{ + struct udevice *bus, *dev; + int ret; + + ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus); + if (ret) { + debug("%s: No bus %d\n", __func__, busnum); + return ret; + } + ret = spi_find_chip_select(bus, cs, &dev); + if (ret) { + debug("%s: No cs %d\n", __func__, cs); + return ret; + } + *busp = bus; + *devp = dev; + + return ret; +} + +int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode, + const char *drv_name, const char *dev_name, + struct udevice **busp, struct spi_slave **devp) +{ + struct udevice *bus, *dev; + struct spi_slave *slave; + bool created = false; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus); + if (ret) { + printf("Invalid bus %d (err=%d)\n", busnum, ret); + return ret; + } + ret = spi_find_chip_select(bus, cs, &dev); + + /* + * If there is no such device, create one automatically. This means + * that we don't need a device tree node or platform data for the + * SPI flash chip - we will bind to the correct driver. + */ + if (ret == -ENODEV && drv_name) { + debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n", + __func__, dev_name, busnum, cs, drv_name); + ret = spi_bind_device(bus, cs, drv_name, dev_name, &dev); + if (ret) + return ret; + created = true; + } else if (ret) { + printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs, + ret); + return ret; + } + + if (!device_active(dev)) { + slave = (struct spi_slave *)calloc(1, + sizeof(struct spi_slave)); + if (!slave) { + ret = -ENOMEM; + goto err; + } + + ret = spi_ofdata_to_platdata(gd->fdt_blob, dev->of_offset, + slave); + if (ret) + goto err; + slave->cs = cs; + slave->dev = dev; + ret = device_probe_child(dev, slave); + free(slave); + if (ret) + goto err; + } + + ret = spi_set_speed_mode(bus, speed, mode); + if (ret) + goto err; + + *busp = bus; + *devp = dev_get_parentdata(dev); + debug("%s: bus=%p, slave=%p\n", __func__, bus, *devp); + + return 0; + +err: + if (created) { + device_remove(dev); + device_unbind(dev); + } + + return ret; +} + +/* Compatibility function - to be removed */ +struct spi_slave *spi_setup_slave_fdt(const void *blob, int node, + int bus_node) +{ + struct udevice *bus, *dev; + int ret; + + ret = uclass_get_device_by_of_offset(UCLASS_SPI, bus_node, &bus); + if (ret) + return NULL; + ret = device_get_child_by_of_offset(bus, node, &dev); + if (ret) + return NULL; + return dev_get_parentdata(dev); +} + +/* Compatibility function - to be removed */ +struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, + unsigned int speed, unsigned int mode) +{ + struct spi_slave *slave; + struct udevice *dev; + int ret; + + ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev, + &slave); + if (ret) + return NULL; + + return slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + device_remove(slave->dev); + slave->dev = NULL; +} + +int spi_ofdata_to_platdata(const void *blob, int node, + struct spi_slave *spi) +{ + int mode = 0; + + spi->cs = fdtdec_get_int(blob, node, "reg", -1); + spi->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 0); + if (fdtdec_get_bool(blob, node, "spi-cpol")) + mode |= SPI_CPOL; + if (fdtdec_get_bool(blob, node, "spi-cpha")) + mode |= SPI_CPHA; + if (fdtdec_get_bool(blob, node, "spi-cs-high")) + mode |= SPI_CS_HIGH; + if (fdtdec_get_bool(blob, node, "spi-half-duplex")) + mode |= SPI_PREAMBLE; + spi->mode = mode; + + return 0; +} + +UCLASS_DRIVER(spi) = { + .id = UCLASS_SPI, + .name = "spi", + .post_bind = spi_post_bind, + .post_probe = spi_post_probe, + .per_device_auto_alloc_size = sizeof(struct dm_spi_bus), +}; + +UCLASS_DRIVER(spi_generic) = { + .id = UCLASS_SPI_GENERIC, + .name = "spi_generic", +}; + +U_BOOT_DRIVER(spi_generic_drv) = { + .name = "spi_generic_drv", + .id = UCLASS_SPI_GENERIC, +}; diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c index 810fa4718c..2d97625fba 100644 --- a/drivers/spi/tegra114_spi.c +++ b/drivers/spi/tegra114_spi.c @@ -22,14 +22,13 @@ */ #include <common.h> -#include <malloc.h> +#include <dm.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/arch/clock.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra114/tegra114_spi.h> #include <spi.h> #include <fdtdec.h> +#include "tegra_spi.h" DECLARE_GLOBAL_DATA_PTR; @@ -104,130 +103,63 @@ struct spi_regs { u32 spare_ctl; /* 18c:SPI_SPARE_CTRL register */ }; -struct tegra_spi_ctrl { +struct tegra114_spi_priv { struct spi_regs *regs; unsigned int freq; unsigned int mode; int periph_id; int valid; + int last_transaction_us; }; -struct tegra_spi_slave { - struct spi_slave slave; - struct tegra_spi_ctrl *ctrl; -}; - -static struct tegra_spi_ctrl spi_ctrls[CONFIG_TEGRA114_SPI_CTRLS]; - -static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) +static int tegra114_spi_ofdata_to_platdata(struct udevice *bus) { - return container_of(slave, struct tegra_spi_slave, slave); -} + struct tegra_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; -int tegra114_spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - if (bus >= CONFIG_TEGRA114_SPI_CTRLS || cs > 3 || !spi_ctrls[bus].valid) - return 0; - else - return 1; -} + plat->base = fdtdec_get_addr(blob, node, "reg"); + plat->periph_id = clock_decode_periph_id(blob, node); -struct spi_slave *tegra114_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct tegra_spi_slave *spi; - - debug("%s: bus: %u, cs: %u, max_hz: %u, mode: %u\n", __func__, - bus, cs, max_hz, mode); - - if (!spi_cs_is_valid(bus, cs)) { - printf("SPI error: unsupported bus %d / chip select %d\n", - bus, cs); - return NULL; - } - - if (max_hz > TEGRA_SPI_MAX_FREQ) { - printf("SPI error: unsupported frequency %d Hz. Max frequency" - " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ); - return NULL; + if (plat->periph_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id %d\n", __func__, + plat->periph_id); + return -FDT_ERR_NOTFOUND; } - spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs); - if (!spi) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } - spi->ctrl = &spi_ctrls[bus]; - if (!spi->ctrl) { - printf("SPI error: could not find controller for bus %d\n", - bus); - return NULL; - } + /* Use 500KHz as a suitable default */ + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + 500000); + plat->deactivate_delay_us = fdtdec_get_int(blob, node, + "spi-deactivate-delay", 0); + debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", + __func__, plat->base, plat->periph_id, plat->frequency, + plat->deactivate_delay_us); - if (max_hz < spi->ctrl->freq) { - debug("%s: limiting frequency from %u to %u\n", __func__, - spi->ctrl->freq, max_hz); - spi->ctrl->freq = max_hz; - } - spi->ctrl->mode = mode; - - return &spi->slave; -} - -void tegra114_spi_free_slave(struct spi_slave *slave) -{ - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - free(spi); + return 0; } -int tegra114_spi_init(int *node_list, int count) +static int tegra114_spi_probe(struct udevice *bus) { - struct tegra_spi_ctrl *ctrl; - int i; - int node = 0; - int found = 0; - - for (i = 0; i < count; i++) { - ctrl = &spi_ctrls[i]; - node = node_list[i]; - - ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob, - node, "reg"); - if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) { - debug("%s: no spi register found\n", __func__); - continue; - } - ctrl->freq = fdtdec_get_int(gd->fdt_blob, node, - "spi-max-frequency", 0); - if (!ctrl->freq) { - debug("%s: no spi max frequency found\n", __func__); - continue; - } + struct tegra_spi_platdata *plat = dev_get_platdata(bus); + struct tegra114_spi_priv *priv = dev_get_priv(bus); - ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node); - if (ctrl->periph_id == PERIPH_ID_NONE) { - debug("%s: could not decode periph id\n", __func__); - continue; - } - ctrl->valid = 1; - found = 1; + priv->regs = (struct spi_regs *)plat->base; - debug("%s: found controller at %p, freq = %u, periph_id = %d\n", - __func__, ctrl->regs, ctrl->freq, ctrl->periph_id); - } + priv->last_transaction_us = timer_get_us(); + priv->freq = plat->frequency; + priv->periph_id = plat->periph_id; - return !found; + return 0; } -int tegra114_spi_claim_bus(struct spi_slave *slave) +static int tegra114_spi_claim_bus(struct udevice *bus) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct tegra114_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; /* Change SPI clock to correct frequency, PLLP_OUT0 source */ - clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH, - spi->ctrl->freq); + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, priv->freq); /* Clear stale status here */ setbits_le32(®s->fifo_status, @@ -244,33 +176,64 @@ int tegra114_spi_claim_bus(struct spi_slave *slave) /* Set master mode and sw controlled CS */ setbits_le32(®s->command1, SPI_CMD1_M_S | SPI_CMD1_CS_SW_HW | - (spi->ctrl->mode << SPI_CMD1_MODE_SHIFT)); + (priv->mode << SPI_CMD1_MODE_SHIFT)); debug("%s: COMMAND1 = %08x\n", __func__, readl(®s->command1)); return 0; } -void tegra114_spi_cs_activate(struct spi_slave *slave) +/** + * Activate the CS by driving it LOW + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +static void spi_cs_activate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra114_spi_priv *priv = dev_get_priv(bus); + + /* If it's too soon to do another transaction, wait */ + if (pdata->deactivate_delay_us && + priv->last_transaction_us) { + ulong delay_us; /* The delay completed so far */ + delay_us = timer_get_us() - priv->last_transaction_us; + if (delay_us < pdata->deactivate_delay_us) + udelay(pdata->deactivate_delay_us - delay_us); + } - clrbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL); + clrbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL); } -void tegra114_spi_cs_deactivate(struct spi_slave *slave) +/** + * Deactivate the CS by driving it HIGH + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +static void spi_cs_deactivate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra114_spi_priv *priv = dev_get_priv(bus); + + setbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL); - setbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL); + /* Remember time of this transaction so we can honour the bus delay */ + if (pdata->deactivate_delay_us) + priv->last_transaction_us = timer_get_us(); + + debug("Deactivate CS, bus '%s'\n", bus->name); } -int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags) +static int tegra114_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *data_out, void *data_in, + unsigned long flags) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra114_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; u32 reg, tmpdout, tmpdin = 0; const u8 *dout = data_out; u8 *din = data_in; @@ -278,7 +241,7 @@ int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, int ret; debug("%s: slave %u:%u dout %p din %p bitlen %u\n", - __func__, slave->bus, slave->cs, dout, din, bitlen); + __func__, bus->seq, spi_chip_select(dev), dout, din, bitlen); if (bitlen % 8) return -1; num_bytes = bitlen / 8; @@ -291,13 +254,13 @@ int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, clrsetbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL, SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE | - (slave->cs << SPI_CMD1_CS_SEL_SHIFT)); + (spi_chip_select(dev) << SPI_CMD1_CS_SEL_SHIFT)); /* set xfer size to 1 block (32 bits) */ writel(0, ®s->dma_blk); if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + spi_cs_activate(dev); /* handle data in 32-bit chunks */ while (num_bytes > 0) { @@ -383,7 +346,7 @@ int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + spi_cs_deactivate(dev); debug("%s: transfer ended. Value=%08x, fifo_status = %08x\n", __func__, tmpdin, readl(®s->fifo_status)); @@ -394,5 +357,56 @@ int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, return -1; } + return ret; +} + +static int tegra114_spi_set_speed(struct udevice *bus, uint speed) +{ + struct tegra_spi_platdata *plat = bus->platdata; + struct tegra114_spi_priv *priv = dev_get_priv(bus); + + if (speed > plat->frequency) + speed = plat->frequency; + priv->freq = speed; + debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq); + return 0; } + +static int tegra114_spi_set_mode(struct udevice *bus, uint mode) +{ + struct tegra114_spi_priv *priv = dev_get_priv(bus); + + priv->mode = mode; + debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); + + return 0; +} + +static const struct dm_spi_ops tegra114_spi_ops = { + .claim_bus = tegra114_spi_claim_bus, + .xfer = tegra114_spi_xfer, + .set_speed = tegra114_spi_set_speed, + .set_mode = tegra114_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id tegra114_spi_ids[] = { + { .compatible = "nvidia,tegra114-spi" }, + { } +}; + +U_BOOT_DRIVER(tegra114_spi) = { + .name = "tegra114_spi", + .id = UCLASS_SPI, + .of_match = tegra114_spi_ids, + .ops = &tegra114_spi_ops, + .ofdata_to_platdata = tegra114_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata), + .priv_auto_alloc_size = sizeof(struct tegra114_spi_priv), + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .probe = tegra114_spi_probe, +}; diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c index b5d561be34..7d0d0f37fc 100644 --- a/drivers/spi/tegra20_sflash.c +++ b/drivers/spi/tegra20_sflash.c @@ -7,15 +7,16 @@ */ #include <common.h> -#include <malloc.h> +#include <dm.h> +#include <errno.h> #include <asm/io.h> #include <asm/gpio.h> #include <asm/arch/clock.h> #include <asm/arch/pinmux.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra20/tegra20_sflash.h> #include <spi.h> #include <fdtdec.h> +#include "tegra_spi.h" DECLARE_GLOBAL_DATA_PTR; @@ -64,129 +65,75 @@ struct spi_regs { u32 rx_fifo; /* SPI_RX_FIFO_0 register */ }; -struct tegra_spi_ctrl { +struct tegra20_sflash_priv { struct spi_regs *regs; unsigned int freq; unsigned int mode; int periph_id; int valid; + int last_transaction_us; }; -struct tegra_spi_slave { - struct spi_slave slave; - struct tegra_spi_ctrl *ctrl; -}; - -/* tegra20 only supports one SFLASH controller */ -static struct tegra_spi_ctrl spi_ctrls[1]; - -static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) -{ - return container_of(slave, struct tegra_spi_slave, slave); -} - -int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs) +int tegra20_sflash_cs_info(struct udevice *bus, unsigned int cs, + struct spi_cs_info *info) { /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */ - if (bus != 0 || cs != 0) - return 0; + if (cs != 0) + return -ENODEV; else - return 1; + return 0; } -struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static int tegra20_sflash_ofdata_to_platdata(struct udevice *bus) { - struct tegra_spi_slave *spi; + struct tegra_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; - if (!spi_cs_is_valid(bus, cs)) { - printf("SPI error: unsupported bus %d / chip select %d\n", - bus, cs); - return NULL; - } + plat->base = fdtdec_get_addr(blob, node, "reg"); + plat->periph_id = clock_decode_periph_id(blob, node); - if (max_hz > TEGRA_SPI_MAX_FREQ) { - printf("SPI error: unsupported frequency %d Hz. Max frequency" - " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ); - return NULL; + if (plat->periph_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id %d\n", __func__, + plat->periph_id); + return -FDT_ERR_NOTFOUND; } - spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs); - if (!spi) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } - spi->ctrl = &spi_ctrls[bus]; - if (!spi->ctrl) { - printf("SPI error: could not find controller for bus %d\n", - bus); - return NULL; - } + /* Use 500KHz as a suitable default */ + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + 500000); + plat->deactivate_delay_us = fdtdec_get_int(blob, node, + "spi-deactivate-delay", 0); + debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", + __func__, plat->base, plat->periph_id, plat->frequency, + plat->deactivate_delay_us); - if (max_hz < spi->ctrl->freq) { - debug("%s: limiting frequency from %u to %u\n", __func__, - spi->ctrl->freq, max_hz); - spi->ctrl->freq = max_hz; - } - spi->ctrl->mode = mode; - - return &spi->slave; + return 0; } -void tegra20_spi_free_slave(struct spi_slave *slave) +static int tegra20_sflash_probe(struct udevice *bus) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - free(spi); -} + struct tegra_spi_platdata *plat = dev_get_platdata(bus); + struct tegra20_sflash_priv *priv = dev_get_priv(bus); -int tegra20_spi_init(int *node_list, int count) -{ - struct tegra_spi_ctrl *ctrl; - int i; - int node = 0; - int found = 0; - - for (i = 0; i < count; i++) { - ctrl = &spi_ctrls[i]; - node = node_list[i]; - - ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob, - node, "reg"); - if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) { - debug("%s: no slink register found\n", __func__); - continue; - } - ctrl->freq = fdtdec_get_int(gd->fdt_blob, node, - "spi-max-frequency", 0); - if (!ctrl->freq) { - debug("%s: no slink max frequency found\n", __func__); - continue; - } + priv->regs = (struct spi_regs *)plat->base; - ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node); - if (ctrl->periph_id == PERIPH_ID_NONE) { - debug("%s: could not decode periph id\n", __func__); - continue; - } - ctrl->valid = 1; - found = 1; + priv->last_transaction_us = timer_get_us(); + priv->freq = plat->frequency; + priv->periph_id = plat->periph_id; - debug("%s: found controller at %p, freq = %u, periph_id = %d\n", - __func__, ctrl->regs, ctrl->freq, ctrl->periph_id); - } - return !found; + return 0; } -int tegra20_spi_claim_bus(struct spi_slave *slave) +static int tegra20_sflash_claim_bus(struct udevice *bus) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct tegra20_sflash_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; u32 reg; /* Change SPI clock to correct frequency, PLLP_OUT0 source */ - clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH, - spi->ctrl->freq); + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, + priv->freq); /* Clear stale status here */ reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ @@ -197,8 +144,8 @@ int tegra20_spi_claim_bus(struct spi_slave *slave) /* * Use sw-controlled CS, so we can clock in data after ReadID, etc. */ - reg = (spi->ctrl->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT; - if (spi->ctrl->mode & 2) + reg = (priv->mode & 1) << SPI_CMD_ACTIVE_SDA_SHIFT; + if (priv->mode & 2) reg |= 1 << SPI_CMD_ACTIVE_SCLK_SHIFT; clrsetbits_le32(®s->command, SPI_CMD_ACTIVE_SCLK_MASK | SPI_CMD_ACTIVE_SDA_MASK, SPI_CMD_CS_SOFT | reg); @@ -215,37 +162,54 @@ int tegra20_spi_claim_bus(struct spi_slave *slave) return 0; } -void tegra20_spi_cs_activate(struct spi_slave *slave) +static void spi_cs_activate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra20_sflash_priv *priv = dev_get_priv(bus); + + /* If it's too soon to do another transaction, wait */ + if (pdata->deactivate_delay_us && + priv->last_transaction_us) { + ulong delay_us; /* The delay completed so far */ + delay_us = timer_get_us() - priv->last_transaction_us; + if (delay_us < pdata->deactivate_delay_us) + udelay(pdata->deactivate_delay_us - delay_us); + } /* CS is negated on Tegra, so drive a 1 to get a 0 */ - setbits_le32(®s->command, SPI_CMD_CS_VAL); + setbits_le32(&priv->regs->command, SPI_CMD_CS_VAL); } -void tegra20_spi_cs_deactivate(struct spi_slave *slave) +static void spi_cs_deactivate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra20_sflash_priv *priv = dev_get_priv(bus); /* CS is negated on Tegra, so drive a 0 to get a 1 */ - clrbits_le32(®s->command, SPI_CMD_CS_VAL); + clrbits_le32(&priv->regs->command, SPI_CMD_CS_VAL); + + /* Remember time of this transaction so we can honour the bus delay */ + if (pdata->deactivate_delay_us) + priv->last_transaction_us = timer_get_us(); } -int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags) +static int tegra20_sflash_xfer(struct udevice *dev, unsigned int bitlen, + const void *data_out, void *data_in, + unsigned long flags) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra20_sflash_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; u32 reg, tmpdout, tmpdin = 0; const u8 *dout = data_out; u8 *din = data_in; int num_bytes; int ret; - debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", - slave->bus, slave->cs, *(u8 *)dout, *(u8 *)din, bitlen); + debug("%s: slave %u:%u dout %p din %p bitlen %u\n", + __func__, bus->seq, spi_chip_select(dev), dout, din, bitlen); if (bitlen % 8) return -1; num_bytes = bitlen / 8; @@ -262,7 +226,7 @@ int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen, debug("spi_xfer: COMMAND = %08x\n", readl(®s->command)); if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + spi_cs_activate(dev); /* handle data in 32-bit chunks */ while (num_bytes > 0) { @@ -327,7 +291,7 @@ int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen, } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + spi_cs_deactivate(dev); debug("spi_xfer: transfer ended. Value=%08x, status = %08x\n", tmpdin, readl(®s->status)); @@ -339,3 +303,51 @@ int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen, return 0; } + +static int tegra20_sflash_set_speed(struct udevice *bus, uint speed) +{ + struct tegra_spi_platdata *plat = bus->platdata; + struct tegra20_sflash_priv *priv = dev_get_priv(bus); + + if (speed > plat->frequency) + speed = plat->frequency; + priv->freq = speed; + debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq); + + return 0; +} + +static int tegra20_sflash_set_mode(struct udevice *bus, uint mode) +{ + struct tegra20_sflash_priv *priv = dev_get_priv(bus); + + priv->mode = mode; + debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); + + return 0; +} + +static const struct dm_spi_ops tegra20_sflash_ops = { + .claim_bus = tegra20_sflash_claim_bus, + .xfer = tegra20_sflash_xfer, + .set_speed = tegra20_sflash_set_speed, + .set_mode = tegra20_sflash_set_mode, + .cs_info = tegra20_sflash_cs_info, +}; + +static const struct udevice_id tegra20_sflash_ids[] = { + { .compatible = "nvidia,tegra20-sflash" }, + { } +}; + +U_BOOT_DRIVER(tegra20_sflash) = { + .name = "tegra20_sflash", + .id = UCLASS_SPI, + .of_match = tegra20_sflash_ids, + .ops = &tegra20_sflash_ops, + .ofdata_to_platdata = tegra20_sflash_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata), + .priv_auto_alloc_size = sizeof(struct tegra20_sflash_priv), + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .probe = tegra20_sflash_probe, +}; diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c index 664de6e916..213fa5f793 100644 --- a/drivers/spi/tegra20_slink.c +++ b/drivers/spi/tegra20_slink.c @@ -22,14 +22,13 @@ */ #include <common.h> -#include <malloc.h> +#include <dm.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/arch/clock.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra20/tegra20_slink.h> #include <spi.h> #include <fdtdec.h> +#include "tegra_spi.h" DECLARE_GLOBAL_DATA_PTR; @@ -87,130 +86,70 @@ struct spi_regs { u32 rx_fifo; /* SLINK_RX_FIFO_0 reg off 180h */ }; -struct tegra_spi_ctrl { +struct tegra30_spi_priv { struct spi_regs *regs; unsigned int freq; unsigned int mode; int periph_id; int valid; + int last_transaction_us; }; struct tegra_spi_slave { struct spi_slave slave; - struct tegra_spi_ctrl *ctrl; + struct tegra30_spi_priv *ctrl; }; -static struct tegra_spi_ctrl spi_ctrls[CONFIG_TEGRA_SLINK_CTRLS]; - -static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) -{ - return container_of(slave, struct tegra_spi_slave, slave); -} - -int tegra30_spi_cs_is_valid(unsigned int bus, unsigned int cs) +static int tegra30_spi_ofdata_to_platdata(struct udevice *bus) { - if (bus >= CONFIG_TEGRA_SLINK_CTRLS || cs > 3 || !spi_ctrls[bus].valid) - return 0; - else - return 1; -} + struct tegra_spi_platdata *plat = bus->platdata; + const void *blob = gd->fdt_blob; + int node = bus->of_offset; -struct spi_slave *tegra30_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct tegra_spi_slave *spi; + plat->base = fdtdec_get_addr(blob, node, "reg"); + plat->periph_id = clock_decode_periph_id(blob, node); - debug("%s: bus: %u, cs: %u, max_hz: %u, mode: %u\n", __func__, - bus, cs, max_hz, mode); - - if (!spi_cs_is_valid(bus, cs)) { - printf("SPI error: unsupported bus %d / chip select %d\n", - bus, cs); - return NULL; - } - - if (max_hz > TEGRA_SPI_MAX_FREQ) { - printf("SPI error: unsupported frequency %d Hz. Max frequency" - " is %d Hz\n", max_hz, TEGRA_SPI_MAX_FREQ); - return NULL; + if (plat->periph_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id %d\n", __func__, + plat->periph_id); + return -FDT_ERR_NOTFOUND; } - spi = spi_alloc_slave(struct tegra_spi_slave, bus, cs); - if (!spi) { - printf("SPI error: malloc of SPI structure failed\n"); - return NULL; - } - spi->ctrl = &spi_ctrls[bus]; - if (!spi->ctrl) { - printf("SPI error: could not find controller for bus %d\n", - bus); - return NULL; - } + /* Use 500KHz as a suitable default */ + plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", + 500000); + plat->deactivate_delay_us = fdtdec_get_int(blob, node, + "spi-deactivate-delay", 0); + debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n", + __func__, plat->base, plat->periph_id, plat->frequency, + plat->deactivate_delay_us); - if (max_hz < spi->ctrl->freq) { - debug("%s: limiting frequency from %u to %u\n", __func__, - spi->ctrl->freq, max_hz); - spi->ctrl->freq = max_hz; - } - spi->ctrl->mode = mode; - - return &spi->slave; + return 0; } -void tegra30_spi_free_slave(struct spi_slave *slave) +static int tegra30_spi_probe(struct udevice *bus) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - - free(spi); -} + struct tegra_spi_platdata *plat = dev_get_platdata(bus); + struct tegra30_spi_priv *priv = dev_get_priv(bus); -int tegra30_spi_init(int *node_list, int count) -{ - struct tegra_spi_ctrl *ctrl; - int i; - int node = 0; - int found = 0; - - for (i = 0; i < count; i++) { - ctrl = &spi_ctrls[i]; - node = node_list[i]; - - ctrl->regs = (struct spi_regs *)fdtdec_get_addr(gd->fdt_blob, - node, "reg"); - if ((fdt_addr_t)ctrl->regs == FDT_ADDR_T_NONE) { - debug("%s: no slink register found\n", __func__); - continue; - } - ctrl->freq = fdtdec_get_int(gd->fdt_blob, node, - "spi-max-frequency", 0); - if (!ctrl->freq) { - debug("%s: no slink max frequency found\n", __func__); - continue; - } + priv->regs = (struct spi_regs *)plat->base; - ctrl->periph_id = clock_decode_periph_id(gd->fdt_blob, node); - if (ctrl->periph_id == PERIPH_ID_NONE) { - debug("%s: could not decode periph id\n", __func__); - continue; - } - ctrl->valid = 1; - found = 1; + priv->last_transaction_us = timer_get_us(); + priv->freq = plat->frequency; + priv->periph_id = plat->periph_id; - debug("%s: found controller at %p, freq = %u, periph_id = %d\n", - __func__, ctrl->regs, ctrl->freq, ctrl->periph_id); - } - return !found; + return 0; } -int tegra30_spi_claim_bus(struct spi_slave *slave) +static int tegra30_spi_claim_bus(struct udevice *bus) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct tegra30_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; u32 reg; /* Change SPI clock to correct frequency, PLLP_OUT0 source */ - clock_start_periph_pll(spi->ctrl->periph_id, CLOCK_ID_PERIPH, - spi->ctrl->freq); + clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, + priv->freq); /* Clear stale status here */ reg = SLINK_STAT_RDY | SLINK_STAT_RXF_FLUSH | SLINK_STAT_TXF_FLUSH | \ @@ -227,29 +166,46 @@ int tegra30_spi_claim_bus(struct spi_slave *slave) return 0; } -void tegra30_spi_cs_activate(struct spi_slave *slave) +static void spi_cs_activate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra30_spi_priv *priv = dev_get_priv(bus); + + /* If it's too soon to do another transaction, wait */ + if (pdata->deactivate_delay_us && + priv->last_transaction_us) { + ulong delay_us; /* The delay completed so far */ + delay_us = timer_get_us() - priv->last_transaction_us; + if (delay_us < pdata->deactivate_delay_us) + udelay(pdata->deactivate_delay_us - delay_us); + } /* CS is negated on Tegra, so drive a 1 to get a 0 */ - setbits_le32(®s->command, SLINK_CMD_CS_VAL); + setbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL); } -void tegra30_spi_cs_deactivate(struct spi_slave *slave) +static void spi_cs_deactivate(struct udevice *dev) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra_spi_platdata *pdata = dev_get_platdata(bus); + struct tegra30_spi_priv *priv = dev_get_priv(bus); /* CS is negated on Tegra, so drive a 0 to get a 1 */ - clrbits_le32(®s->command, SLINK_CMD_CS_VAL); + clrbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL); + + /* Remember time of this transaction so we can honour the bus delay */ + if (pdata->deactivate_delay_us) + priv->last_transaction_us = timer_get_us(); } -int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags) +static int tegra30_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *data_out, void *data_in, + unsigned long flags) { - struct tegra_spi_slave *spi = to_tegra_spi(slave); - struct spi_regs *regs = spi->ctrl->regs; + struct udevice *bus = dev->parent; + struct tegra30_spi_priv *priv = dev_get_priv(bus); + struct spi_regs *regs = priv->regs; u32 reg, tmpdout, tmpdin = 0; const u8 *dout = data_out; u8 *din = data_in; @@ -257,7 +213,7 @@ int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, int ret; debug("%s: slave %u:%u dout %p din %p bitlen %u\n", - __func__, slave->bus, slave->cs, dout, din, bitlen); + __func__, bus->seq, spi_chip_select(dev), dout, din, bitlen); if (bitlen % 8) return -1; num_bytes = bitlen / 8; @@ -276,11 +232,11 @@ int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, clrsetbits_le32(®s->command2, SLINK_CMD2_SS_EN_MASK, SLINK_CMD2_TXEN | SLINK_CMD2_RXEN | - (slave->cs << SLINK_CMD2_SS_EN_SHIFT)); + (spi_chip_select(dev) << SLINK_CMD2_SS_EN_SHIFT)); debug("%s entry: COMMAND2 = %08x\n", __func__, readl(®s->command2)); if (flags & SPI_XFER_BEGIN) - spi_cs_activate(slave); + spi_cs_activate(dev); /* handle data in 32-bit chunks */ while (num_bytes > 0) { @@ -344,7 +300,7 @@ int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, } if (flags & SPI_XFER_END) - spi_cs_deactivate(slave); + spi_cs_deactivate(dev); debug("%s: transfer ended. Value=%08x, status = %08x\n", __func__, tmpdin, readl(®s->status)); @@ -357,3 +313,54 @@ int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, return 0; } + +static int tegra30_spi_set_speed(struct udevice *bus, uint speed) +{ + struct tegra_spi_platdata *plat = bus->platdata; + struct tegra30_spi_priv *priv = dev_get_priv(bus); + + if (speed > plat->frequency) + speed = plat->frequency; + priv->freq = speed; + debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq); + + return 0; +} + +static int tegra30_spi_set_mode(struct udevice *bus, uint mode) +{ + struct tegra30_spi_priv *priv = dev_get_priv(bus); + + priv->mode = mode; + debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode); + + return 0; +} + +static const struct dm_spi_ops tegra30_spi_ops = { + .claim_bus = tegra30_spi_claim_bus, + .xfer = tegra30_spi_xfer, + .set_speed = tegra30_spi_set_speed, + .set_mode = tegra30_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id tegra30_spi_ids[] = { + { .compatible = "nvidia,tegra20-slink" }, + { } +}; + +U_BOOT_DRIVER(tegra30_spi) = { + .name = "tegra20_slink", + .id = UCLASS_SPI, + .of_match = tegra30_spi_ids, + .ops = &tegra30_spi_ops, + .ofdata_to_platdata = tegra30_spi_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata), + .priv_auto_alloc_size = sizeof(struct tegra30_spi_priv), + .per_child_auto_alloc_size = sizeof(struct spi_slave), + .probe = tegra30_spi_probe, +}; diff --git a/drivers/spi/tegra_spi.h b/drivers/spi/tegra_spi.h new file mode 100644 index 0000000000..fb2b50f0bc --- /dev/null +++ b/drivers/spi/tegra_spi.h @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +struct tegra_spi_platdata { + enum periph_id periph_id; + int frequency; /* Default clock frequency, -1 for none */ + ulong base; + uint deactivate_delay_us; /* Delay to wait after deactivate */ +}; diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index 6557055e02..11811094ed 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -580,6 +580,7 @@ static const struct asix_dongle asix_dongles[] = { { 0x2001, 0x3c05, FLAG_TYPE_AX88772 }, /* ASIX 88772B */ { 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC }, + { 0x0b95, 0x7e2b, FLAG_TYPE_AX88772B }, { 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */ }; diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index c4f5157a84..1c3592914d 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -43,5 +43,9 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o +obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o + +# designware +obj-$(CONFIG_USB_DWC2) += dwc2.o diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c new file mode 100644 index 0000000000..2a5bbf5ac0 --- /dev/null +++ b/drivers/usb/host/dwc2.c @@ -0,0 +1,1053 @@ +/* + * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org> + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <usb.h> +#include <malloc.h> +#include <usbroothubdes.h> +#include <asm/io.h> + +#include "dwc2.h" + +/* Use only HC channel 0. */ +#define DWC2_HC_CHANNEL 0 + +#define DWC2_STATUS_BUF_SIZE 64 +#define DWC2_DATA_BUF_SIZE (64 * 1024) + +/* We need doubleword-aligned buffers for DMA transfers */ +DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer, DWC2_DATA_BUF_SIZE, 8); +DEFINE_ALIGN_BUFFER(uint8_t, status_buffer, DWC2_STATUS_BUF_SIZE, 8); + +#define MAX_DEVICE 16 +#define MAX_ENDPOINT 16 +static int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; +static int control_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; + +static int root_hub_devnum; + +static struct dwc2_core_regs *regs = + (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR; + +/* + * DWC2 IP interface + */ +static int wait_for_bit(void *reg, const uint32_t mask, bool set) +{ + unsigned int timeout = 1000000; + uint32_t val; + + while (--timeout) { + val = readl(reg); + if (!set) + val = ~val; + + if ((val & mask) == mask) + return 0; + + udelay(1); + } + + debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n", + __func__, reg, mask, set); + + return -ETIMEDOUT; +} + +/* + * Initializes the FSLSPClkSel field of the HCFG register + * depending on the PHY type. + */ +static void init_fslspclksel(struct dwc2_core_regs *regs) +{ + uint32_t phyclk; + +#if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) + phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ +#else + /* High speed PHY running at full speed or high speed */ + phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ; +#endif + +#ifdef CONFIG_DWC2_ULPI_FS_LS + uint32_t hwcfg2 = readl(®s->ghwcfg2); + uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> + DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; + uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> + DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; + + if (hval == 2 && fval == 1) + phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */ +#endif + + clrsetbits_le32(®s->host_regs.hcfg, + DWC2_HCFG_FSLSPCLKSEL_MASK, + phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET); +} + +/* + * Flush a Tx FIFO. + * + * @param regs Programming view of DWC_otg controller. + * @param num Tx FIFO to flush. + */ +static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num) +{ + int ret; + + writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET), + ®s->grstctl); + ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_TXFFLSH, 0); + if (ret) + printf("%s: Timeout!\n", __func__); + + /* Wait for 3 PHY Clocks */ + udelay(1); +} + +/* + * Flush Rx FIFO. + * + * @param regs Programming view of DWC_otg controller. + */ +static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs) +{ + int ret; + + writel(DWC2_GRSTCTL_RXFFLSH, ®s->grstctl); + ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_RXFFLSH, 0); + if (ret) + printf("%s: Timeout!\n", __func__); + + /* Wait for 3 PHY Clocks */ + udelay(1); +} + +/* + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +static void dwc_otg_core_reset(struct dwc2_core_regs *regs) +{ + int ret; + + /* Wait for AHB master IDLE state. */ + ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_AHBIDLE, 1); + if (ret) + printf("%s: Timeout!\n", __func__); + + /* Core Soft Reset */ + writel(DWC2_GRSTCTL_CSFTRST, ®s->grstctl); + ret = wait_for_bit(®s->grstctl, DWC2_GRSTCTL_CSFTRST, 0); + if (ret) + printf("%s: Timeout!\n", __func__); + + /* + * Wait for core to come out of reset. + * NOTE: This long sleep is _very_ important, otherwise the core will + * not stay in host mode after a connector ID change! + */ + mdelay(100); +} + +/* + * This function initializes the DWC_otg controller registers for + * host mode. + * + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + * + * @param regs Programming view of DWC_otg controller + * + */ +static void dwc_otg_core_host_init(struct dwc2_core_regs *regs) +{ + uint32_t nptxfifosize = 0; + uint32_t ptxfifosize = 0; + uint32_t hprt0 = 0; + int i, ret, num_channels; + + /* Restart the Phy Clock */ + writel(0, ®s->pcgcctl); + + /* Initialize Host Configuration Register */ + init_fslspclksel(regs); +#ifdef CONFIG_DWC2_DFLT_SPEED_FULL + setbits_le32(®s->host_regs.hcfg, DWC2_HCFG_FSLSSUPP); +#endif + + /* Configure data FIFO sizes */ +#ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO + if (readl(®s->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) { + /* Rx FIFO */ + writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, ®s->grxfsiz); + + /* Non-periodic Tx FIFO */ + nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE << + DWC2_FIFOSIZE_DEPTH_OFFSET; + nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE << + DWC2_FIFOSIZE_STARTADDR_OFFSET; + writel(nptxfifosize, ®s->gnptxfsiz); + + /* Periodic Tx FIFO */ + ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE << + DWC2_FIFOSIZE_DEPTH_OFFSET; + ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE + + CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) << + DWC2_FIFOSIZE_STARTADDR_OFFSET; + writel(ptxfifosize, ®s->hptxfsiz); + } +#endif + + /* Clear Host Set HNP Enable in the OTG Control Register */ + clrbits_le32(®s->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN); + + /* Make sure the FIFOs are flushed. */ + dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */ + dwc_otg_flush_rx_fifo(regs); + + /* Flush out any leftover queued requests. */ + num_channels = readl(®s->ghwcfg2); + num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK; + num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET; + num_channels += 1; + + for (i = 0; i < num_channels; i++) + clrsetbits_le32(®s->hc_regs[i].hcchar, + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR, + DWC2_HCCHAR_CHDIS); + + /* Halt all channels to put them into a known state. */ + for (i = 0; i < num_channels; i++) { + clrsetbits_le32(®s->hc_regs[i].hcchar, + DWC2_HCCHAR_EPDIR, + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS); + ret = wait_for_bit(®s->hc_regs[i].hcchar, + DWC2_HCCHAR_CHEN, 0); + if (ret) + printf("%s: Timeout!\n", __func__); + } + + /* Turn on the vbus power. */ + if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) { + hprt0 = readl(®s->hprt0); + hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET); + hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG); + if (!(hprt0 & DWC2_HPRT0_PRTPWR)) { + hprt0 |= DWC2_HPRT0_PRTPWR; + writel(hprt0, ®s->hprt0); + } + } +} + +/* + * This function initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation. + * + * @param regs Programming view of the DWC_otg controller + */ +static void dwc_otg_core_init(struct dwc2_core_regs *regs) +{ + uint32_t ahbcfg = 0; + uint32_t usbcfg = 0; + uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE; + + /* Common Initialization */ + usbcfg = readl(®s->gusbcfg); + + /* Program the ULPI External VBUS bit if needed */ +#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS + usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; +#else + usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV; +#endif + + /* Set external TS Dline pulsing */ +#ifdef CONFIG_DWC2_TS_DLINE + usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE; +#else + usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE; +#endif + writel(usbcfg, ®s->gusbcfg); + + /* Reset the Controller */ + dwc_otg_core_reset(regs); + + /* + * This programming sequence needs to happen in FS mode before + * any other programming occurs + */ +#if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \ + (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS) + /* If FS mode with FS PHY */ + setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_PHYSEL); + + /* Reset after a PHY select */ + dwc_otg_core_reset(regs); + + /* + * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. + * Also do this on HNP Dev/Host mode switches (done in dev_init + * and host_init). + */ + if (readl(®s->gintsts) & DWC2_GINTSTS_CURMODE_HOST) + init_fslspclksel(regs); + +#ifdef CONFIG_DWC2_I2C_ENABLE + /* Program GUSBCFG.OtgUtmifsSel to I2C */ + setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL); + + /* Program GI2CCTL.I2CEn */ + clrsetbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN | + DWC2_GI2CCTL_I2CDEVADDR_MASK, + 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET); + setbits_le32(®s->gi2cctl, DWC2_GI2CCTL_I2CEN); +#endif + +#else + /* High speed PHY. */ + + /* + * HS PHY parameters. These parameters are preserved during + * soft reset so only program the first time. Do a soft reset + * immediately after setting phyif. + */ + usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF); + usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET; + + if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */ +#ifdef CONFIG_DWC2_PHY_ULPI_DDR + usbcfg |= DWC2_GUSBCFG_DDRSEL; +#else + usbcfg &= ~DWC2_GUSBCFG_DDRSEL; +#endif + } else { /* UTMI+ interface */ +#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16) + usbcfg |= DWC2_GUSBCFG_PHYIF; +#endif + } + + writel(usbcfg, ®s->gusbcfg); + + /* Reset after setting the PHY parameters */ + dwc_otg_core_reset(regs); +#endif + + usbcfg = readl(®s->gusbcfg); + usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M); +#ifdef CONFIG_DWC2_ULPI_FS_LS + uint32_t hwcfg2 = readl(®s->ghwcfg2); + uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >> + DWC2_HWCFG2_HS_PHY_TYPE_OFFSET; + uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >> + DWC2_HWCFG2_FS_PHY_TYPE_OFFSET; + if (hval == 2 && fval == 1) { + usbcfg |= DWC2_GUSBCFG_ULPI_FSLS; + usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M; + } +#endif + writel(usbcfg, ®s->gusbcfg); + + /* Program the GAHBCFG Register. */ + switch (readl(®s->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) { + case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY: + break; + case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA: + while (brst_sz > 1) { + ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET); + ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK; + brst_sz >>= 1; + } + +#ifdef CONFIG_DWC2_DMA_ENABLE + ahbcfg |= DWC2_GAHBCFG_DMAENABLE; +#endif + break; + + case DWC2_HWCFG2_ARCHITECTURE_INT_DMA: + ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4; +#ifdef CONFIG_DWC2_DMA_ENABLE + ahbcfg |= DWC2_GAHBCFG_DMAENABLE; +#endif + break; + } + + writel(ahbcfg, ®s->gahbcfg); + + /* Program the GUSBCFG register for HNP/SRP. */ + setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP); + +#ifdef CONFIG_DWC2_IC_USB_CAP + setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP); +#endif +} + +/* + * Prepares a host channel for transferring packets to/from a specific + * endpoint. The HCCHARn register is set up with the characteristics specified + * in _hc. Host channel interrupts that may need to be serviced while this + * transfer is in progress are enabled. + * + * @param regs Programming view of DWC_otg controller + * @param hc Information needed to initialize the host channel + */ +static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num, + uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in, + uint8_t ep_type, uint16_t max_packet) +{ + struct dwc2_hc_regs *hc_regs = ®s->hc_regs[hc_num]; + const uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) | + (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) | + (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) | + (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) | + (max_packet << DWC2_HCCHAR_MPS_OFFSET); + + /* Clear old interrupt conditions for this host channel. */ + writel(0x3fff, &hc_regs->hcint); + + /* + * Program the HCCHARn register with the endpoint characteristics + * for the current transfer. + */ + writel(hcchar, &hc_regs->hcchar); + + /* Program the HCSPLIT register for SPLITs */ + writel(0, &hc_regs->hcsplt); +} + +/* + * DWC2 to USB API interface + */ +/* Direction: In ; Request: Status */ +static int dwc_otg_submit_rh_msg_in_status(struct usb_device *dev, void *buffer, + int txlen, struct devrequest *cmd) +{ + uint32_t hprt0 = 0; + uint32_t port_status = 0; + uint32_t port_change = 0; + int len = 0; + int stat = 0; + + switch (cmd->requesttype & ~USB_DIR_IN) { + case 0: + *(uint16_t *)buffer = cpu_to_le16(1); + len = 2; + break; + case USB_RECIP_INTERFACE: + case USB_RECIP_ENDPOINT: + *(uint16_t *)buffer = cpu_to_le16(0); + len = 2; + break; + case USB_TYPE_CLASS: + *(uint32_t *)buffer = cpu_to_le32(0); + len = 4; + break; + case USB_RECIP_OTHER | USB_TYPE_CLASS: + hprt0 = readl(®s->hprt0); + if (hprt0 & DWC2_HPRT0_PRTCONNSTS) + port_status |= USB_PORT_STAT_CONNECTION; + if (hprt0 & DWC2_HPRT0_PRTENA) + port_status |= USB_PORT_STAT_ENABLE; + if (hprt0 & DWC2_HPRT0_PRTSUSP) + port_status |= USB_PORT_STAT_SUSPEND; + if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT) + port_status |= USB_PORT_STAT_OVERCURRENT; + if (hprt0 & DWC2_HPRT0_PRTRST) + port_status |= USB_PORT_STAT_RESET; + if (hprt0 & DWC2_HPRT0_PRTPWR) + port_status |= USB_PORT_STAT_POWER; + + port_status |= USB_PORT_STAT_HIGH_SPEED; + + if (hprt0 & DWC2_HPRT0_PRTENCHNG) + port_change |= USB_PORT_STAT_C_ENABLE; + if (hprt0 & DWC2_HPRT0_PRTCONNDET) + port_change |= USB_PORT_STAT_C_CONNECTION; + if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG) + port_change |= USB_PORT_STAT_C_OVERCURRENT; + + *(uint32_t *)buffer = cpu_to_le32(port_status | + (port_change << 16)); + len = 4; + break; + default: + puts("unsupported root hub command\n"); + stat = USB_ST_STALLED; + } + + dev->act_len = min(len, txlen); + dev->status = stat; + + return stat; +} + +/* Direction: In ; Request: Descriptor */ +static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev, + void *buffer, int txlen, + struct devrequest *cmd) +{ + unsigned char data[32]; + uint32_t dsc; + int len = 0; + int stat = 0; + uint16_t wValue = cpu_to_le16(cmd->value); + uint16_t wLength = cpu_to_le16(cmd->length); + + switch (cmd->requesttype & ~USB_DIR_IN) { + case 0: + switch (wValue & 0xff00) { + case 0x0100: /* device descriptor */ + len = min3(txlen, sizeof(root_hub_dev_des), wLength); + memcpy(buffer, root_hub_dev_des, len); + break; + case 0x0200: /* configuration descriptor */ + len = min3(txlen, sizeof(root_hub_config_des), wLength); + memcpy(buffer, root_hub_config_des, len); + break; + case 0x0300: /* string descriptors */ + switch (wValue & 0xff) { + case 0x00: + len = min3(txlen, sizeof(root_hub_str_index0), + wLength); + memcpy(buffer, root_hub_str_index0, len); + break; + case 0x01: + len = min3(txlen, sizeof(root_hub_str_index1), + wLength); + memcpy(buffer, root_hub_str_index1, len); + break; + } + break; + default: + stat = USB_ST_STALLED; + } + break; + + case USB_TYPE_CLASS: + /* Root port config, set 1 port and nothing else. */ + dsc = 0x00000001; + + data[0] = 9; /* min length; */ + data[1] = 0x29; + data[2] = dsc & RH_A_NDP; + data[3] = 0; + if (dsc & RH_A_PSM) + data[3] |= 0x1; + if (dsc & RH_A_NOCP) + data[3] |= 0x10; + else if (dsc & RH_A_OCPM) + data[3] |= 0x8; + + /* corresponds to data[4-7] */ + data[5] = (dsc & RH_A_POTPGT) >> 24; + data[7] = dsc & RH_B_DR; + if (data[2] < 7) { + data[8] = 0xff; + } else { + data[0] += 2; + data[8] = (dsc & RH_B_DR) >> 8; + data[9] = 0xff; + data[10] = data[9]; + } + + len = min3(txlen, data[0], wLength); + memcpy(buffer, data, len); + break; + default: + puts("unsupported root hub command\n"); + stat = USB_ST_STALLED; + } + + dev->act_len = min(len, txlen); + dev->status = stat; + + return stat; +} + +/* Direction: In ; Request: Configuration */ +static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev, + void *buffer, int txlen, + struct devrequest *cmd) +{ + int len = 0; + int stat = 0; + + switch (cmd->requesttype & ~USB_DIR_IN) { + case 0: + *(uint8_t *)buffer = 0x01; + len = 1; + break; + default: + puts("unsupported root hub command\n"); + stat = USB_ST_STALLED; + } + + dev->act_len = min(len, txlen); + dev->status = stat; + + return stat; +} + +/* Direction: In */ +static int dwc_otg_submit_rh_msg_in(struct usb_device *dev, + void *buffer, int txlen, + struct devrequest *cmd) +{ + switch (cmd->request) { + case USB_REQ_GET_STATUS: + return dwc_otg_submit_rh_msg_in_status(dev, buffer, + txlen, cmd); + case USB_REQ_GET_DESCRIPTOR: + return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer, + txlen, cmd); + case USB_REQ_GET_CONFIGURATION: + return dwc_otg_submit_rh_msg_in_configuration(dev, buffer, + txlen, cmd); + default: + puts("unsupported root hub command\n"); + return USB_ST_STALLED; + } +} + +/* Direction: Out */ +static int dwc_otg_submit_rh_msg_out(struct usb_device *dev, + void *buffer, int txlen, + struct devrequest *cmd) +{ + int len = 0; + int stat = 0; + uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8); + uint16_t wValue = cpu_to_le16(cmd->value); + + switch (bmrtype_breq & ~USB_DIR_IN) { + case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT: + case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS: + break; + + case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: + switch (wValue) { + case USB_PORT_FEAT_C_CONNECTION: + setbits_le32(®s->hprt0, DWC2_HPRT0_PRTCONNDET); + break; + } + break; + + case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS: + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + break; + + case USB_PORT_FEAT_RESET: + clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | + DWC2_HPRT0_PRTCONNDET | + DWC2_HPRT0_PRTENCHNG | + DWC2_HPRT0_PRTOVRCURRCHNG, + DWC2_HPRT0_PRTRST); + mdelay(50); + clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTRST); + break; + + case USB_PORT_FEAT_POWER: + clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | + DWC2_HPRT0_PRTCONNDET | + DWC2_HPRT0_PRTENCHNG | + DWC2_HPRT0_PRTOVRCURRCHNG, + DWC2_HPRT0_PRTRST); + break; + + case USB_PORT_FEAT_ENABLE: + break; + } + break; + case (USB_REQ_SET_ADDRESS << 8): + root_hub_devnum = wValue; + break; + case (USB_REQ_SET_CONFIGURATION << 8): + break; + default: + puts("unsupported root hub command\n"); + stat = USB_ST_STALLED; + } + + len = min(len, txlen); + + dev->act_len = len; + dev->status = stat; + + return stat; +} + +static int dwc_otg_submit_rh_msg(struct usb_device *dev, unsigned long pipe, + void *buffer, int txlen, + struct devrequest *cmd) +{ + int stat = 0; + + if (usb_pipeint(pipe)) { + puts("Root-Hub submit IRQ: NOT implemented\n"); + return 0; + } + + if (cmd->requesttype & USB_DIR_IN) + stat = dwc_otg_submit_rh_msg_in(dev, buffer, txlen, cmd); + else + stat = dwc_otg_submit_rh_msg_out(dev, buffer, txlen, cmd); + + mdelay(1); + + return stat; +} + +/* U-Boot USB transmission interface */ +int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len) +{ + int devnum = usb_pipedevice(pipe); + int ep = usb_pipeendpoint(pipe); + int max = usb_maxpacket(dev, pipe); + int done = 0; + uint32_t hctsiz, sub, tmp; + struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; + uint32_t hcint; + uint32_t xfer_len; + uint32_t num_packets; + int stop_transfer = 0; + unsigned int timeout = 1000000; + + if (devnum == root_hub_devnum) { + dev->status = 0; + return -EINVAL; + } + + if (len > DWC2_DATA_BUF_SIZE) { + printf("%s: %d is more then available buffer size (%d)\n", + __func__, len, DWC2_DATA_BUF_SIZE); + dev->status = 0; + dev->act_len = 0; + return -EINVAL; + } + + while ((done < len) && !stop_transfer) { + /* Initialize channel */ + dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, + usb_pipein(pipe), DWC2_HCCHAR_EPTYPE_BULK, max); + + xfer_len = len - done; + /* Make sure that xfer_len is a multiple of max packet size. */ + if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE) + xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1; + + if (xfer_len > 0) { + num_packets = (xfer_len + max - 1) / max; + if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) { + num_packets = CONFIG_DWC2_MAX_PACKET_COUNT; + xfer_len = num_packets * max; + } + } else { + num_packets = 1; + } + + if (usb_pipein(pipe)) + xfer_len = num_packets * max; + + writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | + (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) | + (bulk_data_toggle[devnum][ep] << + DWC2_HCTSIZ_PID_OFFSET), + &hc_regs->hctsiz); + + memcpy(aligned_buffer, (char *)buffer + done, len - done); + writel((uint32_t)aligned_buffer, &hc_regs->hcdma); + + /* Set host channel enable after all other setup is complete. */ + clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, + (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | + DWC2_HCCHAR_CHEN); + + while (1) { + hcint = readl(&hc_regs->hcint); + + if (!(hcint & DWC2_HCINT_CHHLTD)) + continue; + + if (hcint & DWC2_HCINT_XFERCOMP) { + hctsiz = readl(&hc_regs->hctsiz); + done += xfer_len; + + sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK; + sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET; + + if (usb_pipein(pipe)) { + done -= sub; + if (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) + stop_transfer = 1; + } + + tmp = hctsiz & DWC2_HCTSIZ_PID_MASK; + tmp >>= DWC2_HCTSIZ_PID_OFFSET; + if (tmp == DWC2_HC_PID_DATA1) { + bulk_data_toggle[devnum][ep] = + DWC2_HC_PID_DATA1; + } else { + bulk_data_toggle[devnum][ep] = + DWC2_HC_PID_DATA0; + } + break; + } + + if (hcint & DWC2_HCINT_STALL) { + puts("DWC OTG: Channel halted\n"); + bulk_data_toggle[devnum][ep] = + DWC2_HC_PID_DATA0; + + stop_transfer = 1; + break; + } + + if (!--timeout) { + printf("%s: Timeout!\n", __func__); + break; + } + } + } + + if (done && usb_pipein(pipe)) + memcpy(buffer, aligned_buffer, done); + + writel(0, &hc_regs->hcintmsk); + writel(0xFFFFFFFF, &hc_regs->hcint); + + dev->status = 0; + dev->act_len = done; + + return 0; +} + +int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, struct devrequest *setup) +{ + struct dwc2_hc_regs *hc_regs = ®s->hc_regs[DWC2_HC_CHANNEL]; + int done = 0; + int devnum = usb_pipedevice(pipe); + int ep = usb_pipeendpoint(pipe); + int max = usb_maxpacket(dev, pipe); + uint32_t hctsiz = 0, sub, tmp, ret; + uint32_t hcint; + const uint32_t hcint_comp_hlt_ack = DWC2_HCINT_XFERCOMP | + DWC2_HCINT_CHHLTD | DWC2_HCINT_ACK; + unsigned int timeout = 1000000; + + /* For CONTROL endpoint pid should start with DATA1 */ + int status_direction; + + if (devnum == root_hub_devnum) { + dev->status = 0; + dev->speed = USB_SPEED_HIGH; + return dwc_otg_submit_rh_msg(dev, pipe, buffer, len, setup); + } + + if (len > DWC2_DATA_BUF_SIZE) { + printf("%s: %d is more then available buffer size(%d)\n", + __func__, len, DWC2_DATA_BUF_SIZE); + dev->status = 0; + dev->act_len = 0; + return -EINVAL; + } + + /* Initialize channel, OUT for setup buffer */ + dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 0, + DWC2_HCCHAR_EPTYPE_CONTROL, max); + + /* SETUP stage */ + writel((8 << DWC2_HCTSIZ_XFERSIZE_OFFSET) | + (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | + (DWC2_HC_PID_SETUP << DWC2_HCTSIZ_PID_OFFSET), + &hc_regs->hctsiz); + + writel((uint32_t)setup, &hc_regs->hcdma); + + /* Set host channel enable after all other setup is complete. */ + clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, + (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN); + + ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, 1); + if (ret) + printf("%s: Timeout!\n", __func__); + + hcint = readl(&hc_regs->hcint); + + if (!(hcint & DWC2_HCINT_CHHLTD) || !(hcint & DWC2_HCINT_XFERCOMP)) { + printf("%s: Error (HCINT=%08x)\n", __func__, hcint); + dev->status = 0; + dev->act_len = 0; + return -EINVAL; + } + + /* Clear interrupts */ + writel(0, &hc_regs->hcintmsk); + writel(0xFFFFFFFF, &hc_regs->hcint); + + if (buffer) { + /* DATA stage */ + dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, + usb_pipein(pipe), + DWC2_HCCHAR_EPTYPE_CONTROL, max); + + /* TODO: check if len < 64 */ + control_data_toggle[devnum][ep] = DWC2_HC_PID_DATA1; + writel((len << DWC2_HCTSIZ_XFERSIZE_OFFSET) | + (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | + (control_data_toggle[devnum][ep] << + DWC2_HCTSIZ_PID_OFFSET), + &hc_regs->hctsiz); + + writel((uint32_t)buffer, &hc_regs->hcdma); + + /* Set host channel enable after all other setup is complete */ + clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, + (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | + DWC2_HCCHAR_CHEN); + + while (1) { + hcint = readl(&hc_regs->hcint); + if (!(hcint & DWC2_HCINT_CHHLTD)) + continue; + + if (hcint & DWC2_HCINT_XFERCOMP) { + hctsiz = readl(&hc_regs->hctsiz); + done = len; + + sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK; + sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET; + + if (usb_pipein(pipe)) + done -= sub; + } + + if (hcint & DWC2_HCINT_ACK) { + tmp = hctsiz & DWC2_HCTSIZ_PID_MASK; + tmp >>= DWC2_HCTSIZ_PID_OFFSET; + if (tmp == DWC2_HC_PID_DATA0) { + control_data_toggle[devnum][ep] = + DWC2_HC_PID_DATA0; + } else { + control_data_toggle[devnum][ep] = + DWC2_HC_PID_DATA1; + } + } + + if (hcint != hcint_comp_hlt_ack) { + printf("%s: Error (HCINT=%08x)\n", + __func__, hcint); + goto out; + } + + if (!--timeout) { + printf("%s: Timeout!\n", __func__); + goto out; + } + + break; + } + } /* End of DATA stage */ + + /* STATUS stage */ + if ((len == 0) || usb_pipeout(pipe)) + status_direction = 1; + else + status_direction = 0; + + dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, + status_direction, DWC2_HCCHAR_EPTYPE_CONTROL, max); + + writel((1 << DWC2_HCTSIZ_PKTCNT_OFFSET) | + (DWC2_HC_PID_DATA1 << DWC2_HCTSIZ_PID_OFFSET), + &hc_regs->hctsiz); + + writel((uint32_t)status_buffer, &hc_regs->hcdma); + + /* Set host channel enable after all other setup is complete. */ + clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK | + DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS, + (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN); + + while (1) { + hcint = readl(&hc_regs->hcint); + if (hcint & DWC2_HCINT_CHHLTD) + break; + } + + if (hcint != hcint_comp_hlt_ack) + printf("%s: Error (HCINT=%08x)\n", __func__, hcint); + +out: + dev->act_len = done; + dev->status = 0; + + return done; +} + +int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, + int len, int interval) +{ + printf("dev = %p pipe = %#lx buf = %p size = %d int = %d\n", + dev, pipe, buffer, len, interval); + return -ENOSYS; +} + +/* U-Boot USB control interface */ +int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) +{ + uint32_t snpsid; + int i, j; + + root_hub_devnum = 0; + + snpsid = readl(®s->gsnpsid); + printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff); + + if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx) { + printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid); + return -ENODEV; + } + + dwc_otg_core_init(regs); + dwc_otg_core_host_init(regs); + + clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | + DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | + DWC2_HPRT0_PRTOVRCURRCHNG, + DWC2_HPRT0_PRTRST); + mdelay(50); + clrbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET | + DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG | + DWC2_HPRT0_PRTRST); + + for (i = 0; i < MAX_DEVICE; i++) { + for (j = 0; j < MAX_ENDPOINT; j++) { + control_data_toggle[i][j] = DWC2_HC_PID_DATA1; + bulk_data_toggle[i][j] = DWC2_HC_PID_DATA0; + } + } + + return 0; +} + +int usb_lowlevel_stop(int index) +{ + /* Put everything in reset. */ + clrsetbits_le32(®s->hprt0, DWC2_HPRT0_PRTENA | + DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG | + DWC2_HPRT0_PRTOVRCURRCHNG, + DWC2_HPRT0_PRTRST); + return 0; +} diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h new file mode 100644 index 0000000000..ba08fd554f --- /dev/null +++ b/drivers/usb/host/dwc2.h @@ -0,0 +1,782 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DWC2_H__ +#define __DWC2_H__ + +struct dwc2_hc_regs { + u32 hcchar; /* 0x00 */ + u32 hcsplt; + u32 hcint; + u32 hcintmsk; + u32 hctsiz; /* 0x10 */ + u32 hcdma; + u32 reserved; + u32 hcdmab; +}; + +struct dwc2_host_regs { + u32 hcfg; /* 0x00 */ + u32 hfir; + u32 hfnum; + u32 _pad_0x40c; + u32 hptxsts; /* 0x10 */ + u32 haint; + u32 haintmsk; + u32 hflbaddr; +}; + +struct dwc2_core_regs { + u32 gotgctl; /* 0x000 */ + u32 gotgint; + u32 gahbcfg; + u32 gusbcfg; + u32 grstctl; /* 0x010 */ + u32 gintsts; + u32 gintmsk; + u32 grxstsr; + u32 grxstsp; /* 0x020 */ + u32 grxfsiz; + u32 gnptxfsiz; + u32 gnptxsts; + u32 gi2cctl; /* 0x030 */ + u32 gpvndctl; + u32 ggpio; + u32 guid; + u32 gsnpsid; /* 0x040 */ + u32 ghwcfg1; + u32 ghwcfg2; + u32 ghwcfg3; + u32 ghwcfg4; /* 0x050 */ + u32 glpmcfg; + u32 _pad_0x58_0x9c[42]; + u32 hptxfsiz; /* 0x100 */ + u32 dptxfsiz_dieptxf[15]; + u32 _pad_0x140_0x3fc[176]; + struct dwc2_host_regs host_regs; /* 0x400 */ + u32 _pad_0x420_0x43c[8]; + u32 hprt0; /* 0x440 */ + u32 _pad_0x444_0x4fc[47]; + struct dwc2_hc_regs hc_regs[16]; /* 0x500 */ + u32 _pad_0x700_0xe00[448]; + u32 pcgcctl; /* 0xe00 */ +}; + +#define DWC2_GOTGCTL_SESREQSCS (1 << 0) +#define DWC2_GOTGCTL_SESREQSCS_OFFSET 0 +#define DWC2_GOTGCTL_SESREQ (1 << 1) +#define DWC2_GOTGCTL_SESREQ_OFFSET 1 +#define DWC2_GOTGCTL_HSTNEGSCS (1 << 8) +#define DWC2_GOTGCTL_HSTNEGSCS_OFFSET 8 +#define DWC2_GOTGCTL_HNPREQ (1 << 9) +#define DWC2_GOTGCTL_HNPREQ_OFFSET 9 +#define DWC2_GOTGCTL_HSTSETHNPEN (1 << 10) +#define DWC2_GOTGCTL_HSTSETHNPEN_OFFSET 10 +#define DWC2_GOTGCTL_DEVHNPEN (1 << 11) +#define DWC2_GOTGCTL_DEVHNPEN_OFFSET 11 +#define DWC2_GOTGCTL_CONIDSTS (1 << 16) +#define DWC2_GOTGCTL_CONIDSTS_OFFSET 16 +#define DWC2_GOTGCTL_DBNCTIME (1 << 17) +#define DWC2_GOTGCTL_DBNCTIME_OFFSET 17 +#define DWC2_GOTGCTL_ASESVLD (1 << 18) +#define DWC2_GOTGCTL_ASESVLD_OFFSET 18 +#define DWC2_GOTGCTL_BSESVLD (1 << 19) +#define DWC2_GOTGCTL_BSESVLD_OFFSET 19 +#define DWC2_GOTGCTL_OTGVER (1 << 20) +#define DWC2_GOTGCTL_OTGVER_OFFSET 20 +#define DWC2_GOTGINT_SESENDDET (1 << 2) +#define DWC2_GOTGINT_SESENDDET_OFFSET 2 +#define DWC2_GOTGINT_SESREQSUCSTSCHNG (1 << 8) +#define DWC2_GOTGINT_SESREQSUCSTSCHNG_OFFSET 8 +#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG (1 << 9) +#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG_OFFSET 9 +#define DWC2_GOTGINT_RESERVER10_16_MASK (0x7F << 10) +#define DWC2_GOTGINT_RESERVER10_16_OFFSET 10 +#define DWC2_GOTGINT_HSTNEGDET (1 << 17) +#define DWC2_GOTGINT_HSTNEGDET_OFFSET 17 +#define DWC2_GOTGINT_ADEVTOUTCHNG (1 << 18) +#define DWC2_GOTGINT_ADEVTOUTCHNG_OFFSET 18 +#define DWC2_GOTGINT_DEBDONE (1 << 19) +#define DWC2_GOTGINT_DEBDONE_OFFSET 19 +#define DWC2_GAHBCFG_GLBLINTRMSK (1 << 0) +#define DWC2_GAHBCFG_GLBLINTRMSK_OFFSET 0 +#define DWC2_GAHBCFG_HBURSTLEN_SINGLE (0 << 1) +#define DWC2_GAHBCFG_HBURSTLEN_INCR (1 << 1) +#define DWC2_GAHBCFG_HBURSTLEN_INCR4 (3 << 1) +#define DWC2_GAHBCFG_HBURSTLEN_INCR8 (5 << 1) +#define DWC2_GAHBCFG_HBURSTLEN_INCR16 (7 << 1) +#define DWC2_GAHBCFG_HBURSTLEN_MASK (0xF << 1) +#define DWC2_GAHBCFG_HBURSTLEN_OFFSET 1 +#define DWC2_GAHBCFG_DMAENABLE (1 << 5) +#define DWC2_GAHBCFG_DMAENABLE_OFFSET 5 +#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL (1 << 7) +#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL_OFFSET 7 +#define DWC2_GAHBCFG_PTXFEMPLVL (1 << 8) +#define DWC2_GAHBCFG_PTXFEMPLVL_OFFSET 8 +#define DWC2_GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define DWC2_GUSBCFG_TOUTCAL_OFFSET 0 +#define DWC2_GUSBCFG_PHYIF (1 << 3) +#define DWC2_GUSBCFG_PHYIF_OFFSET 3 +#define DWC2_GUSBCFG_ULPI_UTMI_SEL (1 << 4) +#define DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET 4 +#define DWC2_GUSBCFG_FSINTF (1 << 5) +#define DWC2_GUSBCFG_FSINTF_OFFSET 5 +#define DWC2_GUSBCFG_PHYSEL (1 << 6) +#define DWC2_GUSBCFG_PHYSEL_OFFSET 6 +#define DWC2_GUSBCFG_DDRSEL (1 << 7) +#define DWC2_GUSBCFG_DDRSEL_OFFSET 7 +#define DWC2_GUSBCFG_SRPCAP (1 << 8) +#define DWC2_GUSBCFG_SRPCAP_OFFSET 8 +#define DWC2_GUSBCFG_HNPCAP (1 << 9) +#define DWC2_GUSBCFG_HNPCAP_OFFSET 9 +#define DWC2_GUSBCFG_USBTRDTIM_MASK (0xF << 10) +#define DWC2_GUSBCFG_USBTRDTIM_OFFSET 10 +#define DWC2_GUSBCFG_NPTXFRWNDEN (1 << 14) +#define DWC2_GUSBCFG_NPTXFRWNDEN_OFFSET 14 +#define DWC2_GUSBCFG_PHYLPWRCLKSEL (1 << 15) +#define DWC2_GUSBCFG_PHYLPWRCLKSEL_OFFSET 15 +#define DWC2_GUSBCFG_OTGUTMIFSSEL (1 << 16) +#define DWC2_GUSBCFG_OTGUTMIFSSEL_OFFSET 16 +#define DWC2_GUSBCFG_ULPI_FSLS (1 << 17) +#define DWC2_GUSBCFG_ULPI_FSLS_OFFSET 17 +#define DWC2_GUSBCFG_ULPI_AUTO_RES (1 << 18) +#define DWC2_GUSBCFG_ULPI_AUTO_RES_OFFSET 18 +#define DWC2_GUSBCFG_ULPI_CLK_SUS_M (1 << 19) +#define DWC2_GUSBCFG_ULPI_CLK_SUS_M_OFFSET 19 +#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV (1 << 20) +#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV_OFFSET 20 +#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR (1 << 21) +#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR_OFFSET 21 +#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE (1 << 22) +#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE_OFFSET 22 +#define DWC2_GUSBCFG_IC_USB_CAP (1 << 26) +#define DWC2_GUSBCFG_IC_USB_CAP_OFFSET 26 +#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE (1 << 27) +#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE_OFFSET 27 +#define DWC2_GUSBCFG_TX_END_DELAY (1 << 28) +#define DWC2_GUSBCFG_TX_END_DELAY_OFFSET 28 +#define DWC2_GUSBCFG_FORCEHOSTMODE (1 << 29) +#define DWC2_GUSBCFG_FORCEHOSTMODE_OFFSET 29 +#define DWC2_GUSBCFG_FORCEDEVMODE (1 << 30) +#define DWC2_GUSBCFG_FORCEDEVMODE_OFFSET 30 +#define DWC2_GLPMCTL_LPM_CAP_EN (1 << 0) +#define DWC2_GLPMCTL_LPM_CAP_EN_OFFSET 0 +#define DWC2_GLPMCTL_APPL_RESP (1 << 1) +#define DWC2_GLPMCTL_APPL_RESP_OFFSET 1 +#define DWC2_GLPMCTL_HIRD_MASK (0xF << 2) +#define DWC2_GLPMCTL_HIRD_OFFSET 2 +#define DWC2_GLPMCTL_REM_WKUP_EN (1 << 6) +#define DWC2_GLPMCTL_REM_WKUP_EN_OFFSET 6 +#define DWC2_GLPMCTL_EN_UTMI_SLEEP (1 << 7) +#define DWC2_GLPMCTL_EN_UTMI_SLEEP_OFFSET 7 +#define DWC2_GLPMCTL_HIRD_THRES_MASK (0x1F << 8) +#define DWC2_GLPMCTL_HIRD_THRES_OFFSET 8 +#define DWC2_GLPMCTL_LPM_RESP_MASK (0x3 << 13) +#define DWC2_GLPMCTL_LPM_RESP_OFFSET 13 +#define DWC2_GLPMCTL_PRT_SLEEP_STS (1 << 15) +#define DWC2_GLPMCTL_PRT_SLEEP_STS_OFFSET 15 +#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK (1 << 16) +#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK_OFFSET 16 +#define DWC2_GLPMCTL_LPM_CHAN_INDEX_MASK (0xF << 17) +#define DWC2_GLPMCTL_LPM_CHAN_INDEX_OFFSET 17 +#define DWC2_GLPMCTL_RETRY_COUNT_MASK (0x7 << 21) +#define DWC2_GLPMCTL_RETRY_COUNT_OFFSET 21 +#define DWC2_GLPMCTL_SEND_LPM (1 << 24) +#define DWC2_GLPMCTL_SEND_LPM_OFFSET 24 +#define DWC2_GLPMCTL_RETRY_COUNT_STS_MASK (0x7 << 25) +#define DWC2_GLPMCTL_RETRY_COUNT_STS_OFFSET 25 +#define DWC2_GLPMCTL_HSIC_CONNECT (1 << 30) +#define DWC2_GLPMCTL_HSIC_CONNECT_OFFSET 30 +#define DWC2_GLPMCTL_INV_SEL_HSIC (1 << 31) +#define DWC2_GLPMCTL_INV_SEL_HSIC_OFFSET 31 +#define DWC2_GRSTCTL_CSFTRST (1 << 0) +#define DWC2_GRSTCTL_CSFTRST_OFFSET 0 +#define DWC2_GRSTCTL_HSFTRST (1 << 1) +#define DWC2_GRSTCTL_HSFTRST_OFFSET 1 +#define DWC2_GRSTCTL_HSTFRM (1 << 2) +#define DWC2_GRSTCTL_HSTFRM_OFFSET 2 +#define DWC2_GRSTCTL_INTKNQFLSH (1 << 3) +#define DWC2_GRSTCTL_INTKNQFLSH_OFFSET 3 +#define DWC2_GRSTCTL_RXFFLSH (1 << 4) +#define DWC2_GRSTCTL_RXFFLSH_OFFSET 4 +#define DWC2_GRSTCTL_TXFFLSH (1 << 5) +#define DWC2_GRSTCTL_TXFFLSH_OFFSET 5 +#define DWC2_GRSTCTL_TXFNUM_MASK (0x1F << 6) +#define DWC2_GRSTCTL_TXFNUM_OFFSET 6 +#define DWC2_GRSTCTL_DMAREQ (1 << 30) +#define DWC2_GRSTCTL_DMAREQ_OFFSET 30 +#define DWC2_GRSTCTL_AHBIDLE (1 << 31) +#define DWC2_GRSTCTL_AHBIDLE_OFFSET 31 +#define DWC2_GINTMSK_MODEMISMATCH (1 << 1) +#define DWC2_GINTMSK_MODEMISMATCH_OFFSET 1 +#define DWC2_GINTMSK_OTGINTR (1 << 2) +#define DWC2_GINTMSK_OTGINTR_OFFSET 2 +#define DWC2_GINTMSK_SOFINTR (1 << 3) +#define DWC2_GINTMSK_SOFINTR_OFFSET 3 +#define DWC2_GINTMSK_RXSTSQLVL (1 << 4) +#define DWC2_GINTMSK_RXSTSQLVL_OFFSET 4 +#define DWC2_GINTMSK_NPTXFEMPTY (1 << 5) +#define DWC2_GINTMSK_NPTXFEMPTY_OFFSET 5 +#define DWC2_GINTMSK_GINNAKEFF (1 << 6) +#define DWC2_GINTMSK_GINNAKEFF_OFFSET 6 +#define DWC2_GINTMSK_GOUTNAKEFF (1 << 7) +#define DWC2_GINTMSK_GOUTNAKEFF_OFFSET 7 +#define DWC2_GINTMSK_I2CINTR (1 << 9) +#define DWC2_GINTMSK_I2CINTR_OFFSET 9 +#define DWC2_GINTMSK_ERLYSUSPEND (1 << 10) +#define DWC2_GINTMSK_ERLYSUSPEND_OFFSET 10 +#define DWC2_GINTMSK_USBSUSPEND (1 << 11) +#define DWC2_GINTMSK_USBSUSPEND_OFFSET 11 +#define DWC2_GINTMSK_USBRESET (1 << 12) +#define DWC2_GINTMSK_USBRESET_OFFSET 12 +#define DWC2_GINTMSK_ENUMDONE (1 << 13) +#define DWC2_GINTMSK_ENUMDONE_OFFSET 13 +#define DWC2_GINTMSK_ISOOUTDROP (1 << 14) +#define DWC2_GINTMSK_ISOOUTDROP_OFFSET 14 +#define DWC2_GINTMSK_EOPFRAME (1 << 15) +#define DWC2_GINTMSK_EOPFRAME_OFFSET 15 +#define DWC2_GINTMSK_EPMISMATCH (1 << 17) +#define DWC2_GINTMSK_EPMISMATCH_OFFSET 17 +#define DWC2_GINTMSK_INEPINTR (1 << 18) +#define DWC2_GINTMSK_INEPINTR_OFFSET 18 +#define DWC2_GINTMSK_OUTEPINTR (1 << 19) +#define DWC2_GINTMSK_OUTEPINTR_OFFSET 19 +#define DWC2_GINTMSK_INCOMPLISOIN (1 << 20) +#define DWC2_GINTMSK_INCOMPLISOIN_OFFSET 20 +#define DWC2_GINTMSK_INCOMPLISOOUT (1 << 21) +#define DWC2_GINTMSK_INCOMPLISOOUT_OFFSET 21 +#define DWC2_GINTMSK_PORTINTR (1 << 24) +#define DWC2_GINTMSK_PORTINTR_OFFSET 24 +#define DWC2_GINTMSK_HCINTR (1 << 25) +#define DWC2_GINTMSK_HCINTR_OFFSET 25 +#define DWC2_GINTMSK_PTXFEMPTY (1 << 26) +#define DWC2_GINTMSK_PTXFEMPTY_OFFSET 26 +#define DWC2_GINTMSK_LPMTRANRCVD (1 << 27) +#define DWC2_GINTMSK_LPMTRANRCVD_OFFSET 27 +#define DWC2_GINTMSK_CONIDSTSCHNG (1 << 28) +#define DWC2_GINTMSK_CONIDSTSCHNG_OFFSET 28 +#define DWC2_GINTMSK_DISCONNECT (1 << 29) +#define DWC2_GINTMSK_DISCONNECT_OFFSET 29 +#define DWC2_GINTMSK_SESSREQINTR (1 << 30) +#define DWC2_GINTMSK_SESSREQINTR_OFFSET 30 +#define DWC2_GINTMSK_WKUPINTR (1 << 31) +#define DWC2_GINTMSK_WKUPINTR_OFFSET 31 +#define DWC2_GINTSTS_CURMODE_DEVICE (0 << 0) +#define DWC2_GINTSTS_CURMODE_HOST (1 << 0) +#define DWC2_GINTSTS_CURMODE (1 << 0) +#define DWC2_GINTSTS_CURMODE_OFFSET 0 +#define DWC2_GINTSTS_MODEMISMATCH (1 << 1) +#define DWC2_GINTSTS_MODEMISMATCH_OFFSET 1 +#define DWC2_GINTSTS_OTGINTR (1 << 2) +#define DWC2_GINTSTS_OTGINTR_OFFSET 2 +#define DWC2_GINTSTS_SOFINTR (1 << 3) +#define DWC2_GINTSTS_SOFINTR_OFFSET 3 +#define DWC2_GINTSTS_RXSTSQLVL (1 << 4) +#define DWC2_GINTSTS_RXSTSQLVL_OFFSET 4 +#define DWC2_GINTSTS_NPTXFEMPTY (1 << 5) +#define DWC2_GINTSTS_NPTXFEMPTY_OFFSET 5 +#define DWC2_GINTSTS_GINNAKEFF (1 << 6) +#define DWC2_GINTSTS_GINNAKEFF_OFFSET 6 +#define DWC2_GINTSTS_GOUTNAKEFF (1 << 7) +#define DWC2_GINTSTS_GOUTNAKEFF_OFFSET 7 +#define DWC2_GINTSTS_I2CINTR (1 << 9) +#define DWC2_GINTSTS_I2CINTR_OFFSET 9 +#define DWC2_GINTSTS_ERLYSUSPEND (1 << 10) +#define DWC2_GINTSTS_ERLYSUSPEND_OFFSET 10 +#define DWC2_GINTSTS_USBSUSPEND (1 << 11) +#define DWC2_GINTSTS_USBSUSPEND_OFFSET 11 +#define DWC2_GINTSTS_USBRESET (1 << 12) +#define DWC2_GINTSTS_USBRESET_OFFSET 12 +#define DWC2_GINTSTS_ENUMDONE (1 << 13) +#define DWC2_GINTSTS_ENUMDONE_OFFSET 13 +#define DWC2_GINTSTS_ISOOUTDROP (1 << 14) +#define DWC2_GINTSTS_ISOOUTDROP_OFFSET 14 +#define DWC2_GINTSTS_EOPFRAME (1 << 15) +#define DWC2_GINTSTS_EOPFRAME_OFFSET 15 +#define DWC2_GINTSTS_INTOKENRX (1 << 16) +#define DWC2_GINTSTS_INTOKENRX_OFFSET 16 +#define DWC2_GINTSTS_EPMISMATCH (1 << 17) +#define DWC2_GINTSTS_EPMISMATCH_OFFSET 17 +#define DWC2_GINTSTS_INEPINT (1 << 18) +#define DWC2_GINTSTS_INEPINT_OFFSET 18 +#define DWC2_GINTSTS_OUTEPINTR (1 << 19) +#define DWC2_GINTSTS_OUTEPINTR_OFFSET 19 +#define DWC2_GINTSTS_INCOMPLISOIN (1 << 20) +#define DWC2_GINTSTS_INCOMPLISOIN_OFFSET 20 +#define DWC2_GINTSTS_INCOMPLISOOUT (1 << 21) +#define DWC2_GINTSTS_INCOMPLISOOUT_OFFSET 21 +#define DWC2_GINTSTS_PORTINTR (1 << 24) +#define DWC2_GINTSTS_PORTINTR_OFFSET 24 +#define DWC2_GINTSTS_HCINTR (1 << 25) +#define DWC2_GINTSTS_HCINTR_OFFSET 25 +#define DWC2_GINTSTS_PTXFEMPTY (1 << 26) +#define DWC2_GINTSTS_PTXFEMPTY_OFFSET 26 +#define DWC2_GINTSTS_LPMTRANRCVD (1 << 27) +#define DWC2_GINTSTS_LPMTRANRCVD_OFFSET 27 +#define DWC2_GINTSTS_CONIDSTSCHNG (1 << 28) +#define DWC2_GINTSTS_CONIDSTSCHNG_OFFSET 28 +#define DWC2_GINTSTS_DISCONNECT (1 << 29) +#define DWC2_GINTSTS_DISCONNECT_OFFSET 29 +#define DWC2_GINTSTS_SESSREQINTR (1 << 30) +#define DWC2_GINTSTS_SESSREQINTR_OFFSET 30 +#define DWC2_GINTSTS_WKUPINTR (1 << 31) +#define DWC2_GINTSTS_WKUPINTR_OFFSET 31 +#define DWC2_GRXSTS_EPNUM_MASK (0xF << 0) +#define DWC2_GRXSTS_EPNUM_OFFSET 0 +#define DWC2_GRXSTS_BCNT_MASK (0x7FF << 4) +#define DWC2_GRXSTS_BCNT_OFFSET 4 +#define DWC2_GRXSTS_DPID_MASK (0x3 << 15) +#define DWC2_GRXSTS_DPID_OFFSET 15 +#define DWC2_GRXSTS_PKTSTS_MASK (0xF << 17) +#define DWC2_GRXSTS_PKTSTS_OFFSET 17 +#define DWC2_GRXSTS_FN_MASK (0xF << 21) +#define DWC2_GRXSTS_FN_OFFSET 21 +#define DWC2_FIFOSIZE_STARTADDR_MASK (0xFFFF << 0) +#define DWC2_FIFOSIZE_STARTADDR_OFFSET 0 +#define DWC2_FIFOSIZE_DEPTH_MASK (0xFFFF << 16) +#define DWC2_FIFOSIZE_DEPTH_OFFSET 16 +#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_MASK (0xFFFF << 0) +#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_OFFSET 0 +#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_MASK (0xFF << 16) +#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_OFFSET 16 +#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE (1 << 24) +#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE_OFFSET 24 +#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_MASK (0x3 << 25) +#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_OFFSET 25 +#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_MASK (0xF << 27) +#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_OFFSET 27 +#define DWC2_DTXFSTS_TXFSPCAVAIL_MASK (0xFFFF << 0) +#define DWC2_DTXFSTS_TXFSPCAVAIL_OFFSET 0 +#define DWC2_GI2CCTL_RWDATA_MASK (0xFF << 0) +#define DWC2_GI2CCTL_RWDATA_OFFSET 0 +#define DWC2_GI2CCTL_REGADDR_MASK (0xFF << 8) +#define DWC2_GI2CCTL_REGADDR_OFFSET 8 +#define DWC2_GI2CCTL_ADDR_MASK (0x7F << 16) +#define DWC2_GI2CCTL_ADDR_OFFSET 16 +#define DWC2_GI2CCTL_I2CEN (1 << 23) +#define DWC2_GI2CCTL_I2CEN_OFFSET 23 +#define DWC2_GI2CCTL_ACK (1 << 24) +#define DWC2_GI2CCTL_ACK_OFFSET 24 +#define DWC2_GI2CCTL_I2CSUSPCTL (1 << 25) +#define DWC2_GI2CCTL_I2CSUSPCTL_OFFSET 25 +#define DWC2_GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define DWC2_GI2CCTL_I2CDEVADDR_OFFSET 26 +#define DWC2_GI2CCTL_RW (1 << 30) +#define DWC2_GI2CCTL_RW_OFFSET 30 +#define DWC2_GI2CCTL_BSYDNE (1 << 31) +#define DWC2_GI2CCTL_BSYDNE_OFFSET 31 +#define DWC2_HWCFG1_EP_DIR0_MASK (0x3 << 0) +#define DWC2_HWCFG1_EP_DIR0_OFFSET 0 +#define DWC2_HWCFG1_EP_DIR1_MASK (0x3 << 2) +#define DWC2_HWCFG1_EP_DIR1_OFFSET 2 +#define DWC2_HWCFG1_EP_DIR2_MASK (0x3 << 4) +#define DWC2_HWCFG1_EP_DIR2_OFFSET 4 +#define DWC2_HWCFG1_EP_DIR3_MASK (0x3 << 6) +#define DWC2_HWCFG1_EP_DIR3_OFFSET 6 +#define DWC2_HWCFG1_EP_DIR4_MASK (0x3 << 8) +#define DWC2_HWCFG1_EP_DIR4_OFFSET 8 +#define DWC2_HWCFG1_EP_DIR5_MASK (0x3 << 10) +#define DWC2_HWCFG1_EP_DIR5_OFFSET 10 +#define DWC2_HWCFG1_EP_DIR6_MASK (0x3 << 12) +#define DWC2_HWCFG1_EP_DIR6_OFFSET 12 +#define DWC2_HWCFG1_EP_DIR7_MASK (0x3 << 14) +#define DWC2_HWCFG1_EP_DIR7_OFFSET 14 +#define DWC2_HWCFG1_EP_DIR8_MASK (0x3 << 16) +#define DWC2_HWCFG1_EP_DIR8_OFFSET 16 +#define DWC2_HWCFG1_EP_DIR9_MASK (0x3 << 18) +#define DWC2_HWCFG1_EP_DIR9_OFFSET 18 +#define DWC2_HWCFG1_EP_DIR10_MASK (0x3 << 20) +#define DWC2_HWCFG1_EP_DIR10_OFFSET 20 +#define DWC2_HWCFG1_EP_DIR11_MASK (0x3 << 22) +#define DWC2_HWCFG1_EP_DIR11_OFFSET 22 +#define DWC2_HWCFG1_EP_DIR12_MASK (0x3 << 24) +#define DWC2_HWCFG1_EP_DIR12_OFFSET 24 +#define DWC2_HWCFG1_EP_DIR13_MASK (0x3 << 26) +#define DWC2_HWCFG1_EP_DIR13_OFFSET 26 +#define DWC2_HWCFG1_EP_DIR14_MASK (0x3 << 28) +#define DWC2_HWCFG1_EP_DIR14_OFFSET 28 +#define DWC2_HWCFG1_EP_DIR15_MASK (0x3 << 30) +#define DWC2_HWCFG1_EP_DIR15_OFFSET 30 +#define DWC2_HWCFG2_OP_MODE_MASK (0x7 << 0) +#define DWC2_HWCFG2_OP_MODE_OFFSET 0 +#define DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY (0x0 << 3) +#define DWC2_HWCFG2_ARCHITECTURE_EXT_DMA (0x1 << 3) +#define DWC2_HWCFG2_ARCHITECTURE_INT_DMA (0x2 << 3) +#define DWC2_HWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define DWC2_HWCFG2_ARCHITECTURE_OFFSET 3 +#define DWC2_HWCFG2_POINT2POINT (1 << 5) +#define DWC2_HWCFG2_POINT2POINT_OFFSET 5 +#define DWC2_HWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define DWC2_HWCFG2_HS_PHY_TYPE_OFFSET 6 +#define DWC2_HWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define DWC2_HWCFG2_FS_PHY_TYPE_OFFSET 8 +#define DWC2_HWCFG2_NUM_DEV_EP_MASK (0xF << 10) +#define DWC2_HWCFG2_NUM_DEV_EP_OFFSET 10 +#define DWC2_HWCFG2_NUM_HOST_CHAN_MASK (0xF << 14) +#define DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET 14 +#define DWC2_HWCFG2_PERIO_EP_SUPPORTED (1 << 18) +#define DWC2_HWCFG2_PERIO_EP_SUPPORTED_OFFSET 18 +#define DWC2_HWCFG2_DYNAMIC_FIFO (1 << 19) +#define DWC2_HWCFG2_DYNAMIC_FIFO_OFFSET 19 +#define DWC2_HWCFG2_MULTI_PROC_INT (1 << 20) +#define DWC2_HWCFG2_MULTI_PROC_INT_OFFSET 20 +#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_OFFSET 22 +#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_OFFSET 24 +#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1F << 26) +#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_OFFSET 26 +#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xF << 0) +#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_OFFSET 0 +#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_OFFSET 4 +#define DWC2_HWCFG3_OTG_FUNC (1 << 7) +#define DWC2_HWCFG3_OTG_FUNC_OFFSET 7 +#define DWC2_HWCFG3_I2C (1 << 8) +#define DWC2_HWCFG3_I2C_OFFSET 8 +#define DWC2_HWCFG3_VENDOR_CTRL_IF (1 << 9) +#define DWC2_HWCFG3_VENDOR_CTRL_IF_OFFSET 9 +#define DWC2_HWCFG3_OPTIONAL_FEATURES (1 << 10) +#define DWC2_HWCFG3_OPTIONAL_FEATURES_OFFSET 10 +#define DWC2_HWCFG3_SYNCH_RESET_TYPE (1 << 11) +#define DWC2_HWCFG3_SYNCH_RESET_TYPE_OFFSET 11 +#define DWC2_HWCFG3_OTG_ENABLE_IC_USB (1 << 12) +#define DWC2_HWCFG3_OTG_ENABLE_IC_USB_OFFSET 12 +#define DWC2_HWCFG3_OTG_ENABLE_HSIC (1 << 13) +#define DWC2_HWCFG3_OTG_ENABLE_HSIC_OFFSET 13 +#define DWC2_HWCFG3_OTG_LPM_EN (1 << 15) +#define DWC2_HWCFG3_OTG_LPM_EN_OFFSET 15 +#define DWC2_HWCFG3_DFIFO_DEPTH_MASK (0xFFFF << 16) +#define DWC2_HWCFG3_DFIFO_DEPTH_OFFSET 16 +#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xF << 0) +#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_OFFSET 0 +#define DWC2_HWCFG4_POWER_OPTIMIZ (1 << 4) +#define DWC2_HWCFG4_POWER_OPTIMIZ_OFFSET 4 +#define DWC2_HWCFG4_MIN_AHB_FREQ_MASK (0x1FF << 5) +#define DWC2_HWCFG4_MIN_AHB_FREQ_OFFSET 5 +#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_OFFSET 14 +#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xF << 16) +#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_OFFSET 16 +#define DWC2_HWCFG4_IDDIG_FILT_EN (1 << 20) +#define DWC2_HWCFG4_IDDIG_FILT_EN_OFFSET 20 +#define DWC2_HWCFG4_VBUS_VALID_FILT_EN (1 << 21) +#define DWC2_HWCFG4_VBUS_VALID_FILT_EN_OFFSET 21 +#define DWC2_HWCFG4_A_VALID_FILT_EN (1 << 22) +#define DWC2_HWCFG4_A_VALID_FILT_EN_OFFSET 22 +#define DWC2_HWCFG4_B_VALID_FILT_EN (1 << 23) +#define DWC2_HWCFG4_B_VALID_FILT_EN_OFFSET 23 +#define DWC2_HWCFG4_SESSION_END_FILT_EN (1 << 24) +#define DWC2_HWCFG4_SESSION_END_FILT_EN_OFFSET 24 +#define DWC2_HWCFG4_DED_FIFO_EN (1 << 25) +#define DWC2_HWCFG4_DED_FIFO_EN_OFFSET 25 +#define DWC2_HWCFG4_NUM_IN_EPS_MASK (0xF << 26) +#define DWC2_HWCFG4_NUM_IN_EPS_OFFSET 26 +#define DWC2_HWCFG4_DESC_DMA (1 << 30) +#define DWC2_HWCFG4_DESC_DMA_OFFSET 30 +#define DWC2_HWCFG4_DESC_DMA_DYN (1 << 31) +#define DWC2_HWCFG4_DESC_DMA_DYN_OFFSET 31 +#define DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define DWC2_HCFG_FSLSPCLKSEL_48_MHZ 1 +#define DWC2_HCFG_FSLSPCLKSEL_6_MHZ 2 +#define DWC2_HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define DWC2_HCFG_FSLSPCLKSEL_OFFSET 0 +#define DWC2_HCFG_FSLSSUPP (1 << 2) +#define DWC2_HCFG_FSLSSUPP_OFFSET 2 +#define DWC2_HCFG_DESCDMA (1 << 23) +#define DWC2_HCFG_DESCDMA_OFFSET 23 +#define DWC2_HCFG_FRLISTEN_MASK (0x3 << 24) +#define DWC2_HCFG_FRLISTEN_OFFSET 24 +#define DWC2_HCFG_PERSCHEDENA (1 << 26) +#define DWC2_HCFG_PERSCHEDENA_OFFSET 26 +#define DWC2_HCFG_PERSCHEDSTAT (1 << 27) +#define DWC2_HCFG_PERSCHEDSTAT_OFFSET 27 +#define DWC2_HFIR_FRINT_MASK (0xFFFF << 0) +#define DWC2_HFIR_FRINT_OFFSET 0 +#define DWC2_HFNUM_FRNUM_MASK (0xFFFF << 0) +#define DWC2_HFNUM_FRNUM_OFFSET 0 +#define DWC2_HFNUM_FRREM_MASK (0xFFFF << 16) +#define DWC2_HFNUM_FRREM_OFFSET 16 +#define DWC2_HPTXSTS_PTXFSPCAVAIL_MASK (0xFFFF << 0) +#define DWC2_HPTXSTS_PTXFSPCAVAIL_OFFSET 0 +#define DWC2_HPTXSTS_PTXQSPCAVAIL_MASK (0xFF << 16) +#define DWC2_HPTXSTS_PTXQSPCAVAIL_OFFSET 16 +#define DWC2_HPTXSTS_PTXQTOP_TERMINATE (1 << 24) +#define DWC2_HPTXSTS_PTXQTOP_TERMINATE_OFFSET 24 +#define DWC2_HPTXSTS_PTXQTOP_TOKEN_MASK (0x3 << 25) +#define DWC2_HPTXSTS_PTXQTOP_TOKEN_OFFSET 25 +#define DWC2_HPTXSTS_PTXQTOP_CHNUM_MASK (0xF << 27) +#define DWC2_HPTXSTS_PTXQTOP_CHNUM_OFFSET 27 +#define DWC2_HPTXSTS_PTXQTOP_ODD (1 << 31) +#define DWC2_HPTXSTS_PTXQTOP_ODD_OFFSET 31 +#define DWC2_HPRT0_PRTCONNSTS (1 << 0) +#define DWC2_HPRT0_PRTCONNSTS_OFFSET 0 +#define DWC2_HPRT0_PRTCONNDET (1 << 1) +#define DWC2_HPRT0_PRTCONNDET_OFFSET 1 +#define DWC2_HPRT0_PRTENA (1 << 2) +#define DWC2_HPRT0_PRTENA_OFFSET 2 +#define DWC2_HPRT0_PRTENCHNG (1 << 3) +#define DWC2_HPRT0_PRTENCHNG_OFFSET 3 +#define DWC2_HPRT0_PRTOVRCURRACT (1 << 4) +#define DWC2_HPRT0_PRTOVRCURRACT_OFFSET 4 +#define DWC2_HPRT0_PRTOVRCURRCHNG (1 << 5) +#define DWC2_HPRT0_PRTOVRCURRCHNG_OFFSET 5 +#define DWC2_HPRT0_PRTRES (1 << 6) +#define DWC2_HPRT0_PRTRES_OFFSET 6 +#define DWC2_HPRT0_PRTSUSP (1 << 7) +#define DWC2_HPRT0_PRTSUSP_OFFSET 7 +#define DWC2_HPRT0_PRTRST (1 << 8) +#define DWC2_HPRT0_PRTRST_OFFSET 8 +#define DWC2_HPRT0_PRTLNSTS_MASK (0x3 << 10) +#define DWC2_HPRT0_PRTLNSTS_OFFSET 10 +#define DWC2_HPRT0_PRTPWR (1 << 12) +#define DWC2_HPRT0_PRTPWR_OFFSET 12 +#define DWC2_HPRT0_PRTTSTCTL_MASK (0xF << 13) +#define DWC2_HPRT0_PRTTSTCTL_OFFSET 13 +#define DWC2_HPRT0_PRTSPD_MASK (0x3 << 17) +#define DWC2_HPRT0_PRTSPD_OFFSET 17 +#define DWC2_HAINT_CH0 (1 << 0) +#define DWC2_HAINT_CH0_OFFSET 0 +#define DWC2_HAINT_CH1 (1 << 1) +#define DWC2_HAINT_CH1_OFFSET 1 +#define DWC2_HAINT_CH2 (1 << 2) +#define DWC2_HAINT_CH2_OFFSET 2 +#define DWC2_HAINT_CH3 (1 << 3) +#define DWC2_HAINT_CH3_OFFSET 3 +#define DWC2_HAINT_CH4 (1 << 4) +#define DWC2_HAINT_CH4_OFFSET 4 +#define DWC2_HAINT_CH5 (1 << 5) +#define DWC2_HAINT_CH5_OFFSET 5 +#define DWC2_HAINT_CH6 (1 << 6) +#define DWC2_HAINT_CH6_OFFSET 6 +#define DWC2_HAINT_CH7 (1 << 7) +#define DWC2_HAINT_CH7_OFFSET 7 +#define DWC2_HAINT_CH8 (1 << 8) +#define DWC2_HAINT_CH8_OFFSET 8 +#define DWC2_HAINT_CH9 (1 << 9) +#define DWC2_HAINT_CH9_OFFSET 9 +#define DWC2_HAINT_CH10 (1 << 10) +#define DWC2_HAINT_CH10_OFFSET 10 +#define DWC2_HAINT_CH11 (1 << 11) +#define DWC2_HAINT_CH11_OFFSET 11 +#define DWC2_HAINT_CH12 (1 << 12) +#define DWC2_HAINT_CH12_OFFSET 12 +#define DWC2_HAINT_CH13 (1 << 13) +#define DWC2_HAINT_CH13_OFFSET 13 +#define DWC2_HAINT_CH14 (1 << 14) +#define DWC2_HAINT_CH14_OFFSET 14 +#define DWC2_HAINT_CH15 (1 << 15) +#define DWC2_HAINT_CH15_OFFSET 15 +#define DWC2_HAINT_CHINT_MASK 0xffff +#define DWC2_HAINT_CHINT_OFFSET 0 +#define DWC2_HAINTMSK_CH0 (1 << 0) +#define DWC2_HAINTMSK_CH0_OFFSET 0 +#define DWC2_HAINTMSK_CH1 (1 << 1) +#define DWC2_HAINTMSK_CH1_OFFSET 1 +#define DWC2_HAINTMSK_CH2 (1 << 2) +#define DWC2_HAINTMSK_CH2_OFFSET 2 +#define DWC2_HAINTMSK_CH3 (1 << 3) +#define DWC2_HAINTMSK_CH3_OFFSET 3 +#define DWC2_HAINTMSK_CH4 (1 << 4) +#define DWC2_HAINTMSK_CH4_OFFSET 4 +#define DWC2_HAINTMSK_CH5 (1 << 5) +#define DWC2_HAINTMSK_CH5_OFFSET 5 +#define DWC2_HAINTMSK_CH6 (1 << 6) +#define DWC2_HAINTMSK_CH6_OFFSET 6 +#define DWC2_HAINTMSK_CH7 (1 << 7) +#define DWC2_HAINTMSK_CH7_OFFSET 7 +#define DWC2_HAINTMSK_CH8 (1 << 8) +#define DWC2_HAINTMSK_CH8_OFFSET 8 +#define DWC2_HAINTMSK_CH9 (1 << 9) +#define DWC2_HAINTMSK_CH9_OFFSET 9 +#define DWC2_HAINTMSK_CH10 (1 << 10) +#define DWC2_HAINTMSK_CH10_OFFSET 10 +#define DWC2_HAINTMSK_CH11 (1 << 11) +#define DWC2_HAINTMSK_CH11_OFFSET 11 +#define DWC2_HAINTMSK_CH12 (1 << 12) +#define DWC2_HAINTMSK_CH12_OFFSET 12 +#define DWC2_HAINTMSK_CH13 (1 << 13) +#define DWC2_HAINTMSK_CH13_OFFSET 13 +#define DWC2_HAINTMSK_CH14 (1 << 14) +#define DWC2_HAINTMSK_CH14_OFFSET 14 +#define DWC2_HAINTMSK_CH15 (1 << 15) +#define DWC2_HAINTMSK_CH15_OFFSET 15 +#define DWC2_HAINTMSK_CHINT_MASK 0xffff +#define DWC2_HAINTMSK_CHINT_OFFSET 0 +#define DWC2_HCCHAR_MPS_MASK (0x7FF << 0) +#define DWC2_HCCHAR_MPS_OFFSET 0 +#define DWC2_HCCHAR_EPNUM_MASK (0xF << 11) +#define DWC2_HCCHAR_EPNUM_OFFSET 11 +#define DWC2_HCCHAR_EPDIR (1 << 15) +#define DWC2_HCCHAR_EPDIR_OFFSET 15 +#define DWC2_HCCHAR_LSPDDEV (1 << 17) +#define DWC2_HCCHAR_LSPDDEV_OFFSET 17 +#define DWC2_HCCHAR_EPTYPE_CONTROL 0 +#define DWC2_HCCHAR_EPTYPE_ISOC 1 +#define DWC2_HCCHAR_EPTYPE_BULK 2 +#define DWC2_HCCHAR_EPTYPE_INTR 3 +#define DWC2_HCCHAR_EPTYPE_MASK (0x3 << 18) +#define DWC2_HCCHAR_EPTYPE_OFFSET 18 +#define DWC2_HCCHAR_MULTICNT_MASK (0x3 << 20) +#define DWC2_HCCHAR_MULTICNT_OFFSET 20 +#define DWC2_HCCHAR_DEVADDR_MASK (0x7F << 22) +#define DWC2_HCCHAR_DEVADDR_OFFSET 22 +#define DWC2_HCCHAR_ODDFRM (1 << 29) +#define DWC2_HCCHAR_ODDFRM_OFFSET 29 +#define DWC2_HCCHAR_CHDIS (1 << 30) +#define DWC2_HCCHAR_CHDIS_OFFSET 30 +#define DWC2_HCCHAR_CHEN (1 << 31) +#define DWC2_HCCHAR_CHEN_OFFSET 31 +#define DWC2_HCSPLT_PRTADDR_MASK (0x7F << 0) +#define DWC2_HCSPLT_PRTADDR_OFFSET 0 +#define DWC2_HCSPLT_HUBADDR_MASK (0x7F << 7) +#define DWC2_HCSPLT_HUBADDR_OFFSET 7 +#define DWC2_HCSPLT_XACTPOS_MASK (0x3 << 14) +#define DWC2_HCSPLT_XACTPOS_OFFSET 14 +#define DWC2_HCSPLT_COMPSPLT (1 << 16) +#define DWC2_HCSPLT_COMPSPLT_OFFSET 16 +#define DWC2_HCSPLT_SPLTENA (1 << 31) +#define DWC2_HCSPLT_SPLTENA_OFFSET 31 +#define DWC2_HCINT_XFERCOMP (1 << 0) +#define DWC2_HCINT_XFERCOMP_OFFSET 0 +#define DWC2_HCINT_CHHLTD (1 << 1) +#define DWC2_HCINT_CHHLTD_OFFSET 1 +#define DWC2_HCINT_AHBERR (1 << 2) +#define DWC2_HCINT_AHBERR_OFFSET 2 +#define DWC2_HCINT_STALL (1 << 3) +#define DWC2_HCINT_STALL_OFFSET 3 +#define DWC2_HCINT_NAK (1 << 4) +#define DWC2_HCINT_NAK_OFFSET 4 +#define DWC2_HCINT_ACK (1 << 5) +#define DWC2_HCINT_ACK_OFFSET 5 +#define DWC2_HCINT_NYET (1 << 6) +#define DWC2_HCINT_NYET_OFFSET 6 +#define DWC2_HCINT_XACTERR (1 << 7) +#define DWC2_HCINT_XACTERR_OFFSET 7 +#define DWC2_HCINT_BBLERR (1 << 8) +#define DWC2_HCINT_BBLERR_OFFSET 8 +#define DWC2_HCINT_FRMOVRUN (1 << 9) +#define DWC2_HCINT_FRMOVRUN_OFFSET 9 +#define DWC2_HCINT_DATATGLERR (1 << 10) +#define DWC2_HCINT_DATATGLERR_OFFSET 10 +#define DWC2_HCINT_BNA (1 << 11) +#define DWC2_HCINT_BNA_OFFSET 11 +#define DWC2_HCINT_XCS_XACT (1 << 12) +#define DWC2_HCINT_XCS_XACT_OFFSET 12 +#define DWC2_HCINT_FRM_LIST_ROLL (1 << 13) +#define DWC2_HCINT_FRM_LIST_ROLL_OFFSET 13 +#define DWC2_HCINTMSK_XFERCOMPL (1 << 0) +#define DWC2_HCINTMSK_XFERCOMPL_OFFSET 0 +#define DWC2_HCINTMSK_CHHLTD (1 << 1) +#define DWC2_HCINTMSK_CHHLTD_OFFSET 1 +#define DWC2_HCINTMSK_AHBERR (1 << 2) +#define DWC2_HCINTMSK_AHBERR_OFFSET 2 +#define DWC2_HCINTMSK_STALL (1 << 3) +#define DWC2_HCINTMSK_STALL_OFFSET 3 +#define DWC2_HCINTMSK_NAK (1 << 4) +#define DWC2_HCINTMSK_NAK_OFFSET 4 +#define DWC2_HCINTMSK_ACK (1 << 5) +#define DWC2_HCINTMSK_ACK_OFFSET 5 +#define DWC2_HCINTMSK_NYET (1 << 6) +#define DWC2_HCINTMSK_NYET_OFFSET 6 +#define DWC2_HCINTMSK_XACTERR (1 << 7) +#define DWC2_HCINTMSK_XACTERR_OFFSET 7 +#define DWC2_HCINTMSK_BBLERR (1 << 8) +#define DWC2_HCINTMSK_BBLERR_OFFSET 8 +#define DWC2_HCINTMSK_FRMOVRUN (1 << 9) +#define DWC2_HCINTMSK_FRMOVRUN_OFFSET 9 +#define DWC2_HCINTMSK_DATATGLERR (1 << 10) +#define DWC2_HCINTMSK_DATATGLERR_OFFSET 10 +#define DWC2_HCINTMSK_BNA (1 << 11) +#define DWC2_HCINTMSK_BNA_OFFSET 11 +#define DWC2_HCINTMSK_XCS_XACT (1 << 12) +#define DWC2_HCINTMSK_XCS_XACT_OFFSET 12 +#define DWC2_HCINTMSK_FRM_LIST_ROLL (1 << 13) +#define DWC2_HCINTMSK_FRM_LIST_ROLL_OFFSET 13 +#define DWC2_HCTSIZ_XFERSIZE_MASK 0x7ffff +#define DWC2_HCTSIZ_XFERSIZE_OFFSET 0 +#define DWC2_HCTSIZ_SCHINFO_MASK 0xff +#define DWC2_HCTSIZ_SCHINFO_OFFSET 0 +#define DWC2_HCTSIZ_NTD_MASK (0xff << 8) +#define DWC2_HCTSIZ_NTD_OFFSET 8 +#define DWC2_HCTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DWC2_HCTSIZ_PKTCNT_OFFSET 19 +#define DWC2_HCTSIZ_PID_MASK (0x3 << 29) +#define DWC2_HCTSIZ_PID_OFFSET 29 +#define DWC2_HCTSIZ_DOPNG (1 << 31) +#define DWC2_HCTSIZ_DOPNG_OFFSET 31 +#define DWC2_HCDMA_CTD_MASK (0xFF << 3) +#define DWC2_HCDMA_CTD_OFFSET 3 +#define DWC2_HCDMA_DMA_ADDR_MASK (0x1FFFFF << 11) +#define DWC2_HCDMA_DMA_ADDR_OFFSET 11 +#define DWC2_PCGCCTL_STOPPCLK (1 << 0) +#define DWC2_PCGCCTL_STOPPCLK_OFFSET 0 +#define DWC2_PCGCCTL_GATEHCLK (1 << 1) +#define DWC2_PCGCCTL_GATEHCLK_OFFSET 1 +#define DWC2_PCGCCTL_PWRCLMP (1 << 2) +#define DWC2_PCGCCTL_PWRCLMP_OFFSET 2 +#define DWC2_PCGCCTL_RSTPDWNMODULE (1 << 3) +#define DWC2_PCGCCTL_RSTPDWNMODULE_OFFSET 3 +#define DWC2_PCGCCTL_PHYSUSPENDED (1 << 4) +#define DWC2_PCGCCTL_PHYSUSPENDED_OFFSET 4 +#define DWC2_PCGCCTL_ENBL_SLEEP_GATING (1 << 5) +#define DWC2_PCGCCTL_ENBL_SLEEP_GATING_OFFSET 5 +#define DWC2_PCGCCTL_PHY_IN_SLEEP (1 << 6) +#define DWC2_PCGCCTL_PHY_IN_SLEEP_OFFSET 6 +#define DWC2_PCGCCTL_DEEP_SLEEP (1 << 7) +#define DWC2_PCGCCTL_DEEP_SLEEP_OFFSET 7 +#define DWC2_SNPSID_DEVID_VER_2xx (0x4f542 << 12) +#define DWC2_SNPSID_DEVID_MASK (0xfffff << 12) +#define DWC2_SNPSID_DEVID_OFFSET 12 + +/* Host controller specific */ +#define DWC2_HC_PID_DATA0 0 +#define DWC2_HC_PID_DATA2 1 +#define DWC2_HC_PID_DATA1 2 +#define DWC2_HC_PID_MDATA 3 +#define DWC2_HC_PID_SETUP 3 + +/* roothub.a masks */ +#define RH_A_NDP (0xff << 0) /* number of downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* over current protection mode */ +#define RH_A_NOCP (1 << 12) /* no over current protection */ +#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ + +/* roothub.b masks */ +#define RH_B_DR 0x0000ffff /* device removable flags */ +#define RH_B_PPCM 0xffff0000 /* port power control mask */ + +/* Default driver configuration */ +#define CONFIG_DWC2_DMA_ENABLE +#define CONFIG_DWC2_DMA_BURST_SIZE 32 /* DMA burst len */ +#undef CONFIG_DWC2_DFLT_SPEED_FULL /* Do not force DWC2 to FS */ +#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO /* Runtime FIFO size detect */ +#define CONFIG_DWC2_MAX_CHANNELS 16 /* Max # of EPs */ +#define CONFIG_DWC2_HOST_RX_FIFO_SIZE (516 + CONFIG_DWC2_MAX_CHANNELS) +#define CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE 0x100 /* nPeriodic TX FIFO */ +#define CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE 0x200 /* Periodic TX FIFO */ +#define CONFIG_DWC2_MAX_TRANSFER_SIZE 65535 +#define CONFIG_DWC2_MAX_PACKET_COUNT 511 + +#define DWC2_PHY_TYPE_FS 0 +#define DWC2_PHY_TYPE_UTMI 1 +#define DWC2_PHY_TYPE_ULPI 2 +#define CONFIG_DWC2_PHY_TYPE DWC2_PHY_TYPE_UTMI /* PHY type */ +#define CONFIG_DWC2_UTMI_WIDTH 8 /* UTMI bus width (8/16) */ + +#undef CONFIG_DWC2_PHY_ULPI_DDR /* ULPI PHY uses DDR mode */ +#define CONFIG_DWC2_PHY_ULPI_EXT_VBUS /* ULPI PHY controls VBUS */ +#undef CONFIG_DWC2_I2C_ENABLE /* Enable I2C */ +#undef CONFIG_DWC2_ULPI_FS_LS /* ULPI is FS/LS */ +#undef CONFIG_DWC2_TS_DLINE /* External DLine pulsing */ +#undef CONFIG_DWC2_THR_CTL /* Threshold control */ +#define CONFIG_DWC2_TX_THR_LENGTH 64 +#undef CONFIG_DWC2_IC_USB_CAP /* IC Cap */ + +#endif /* __DWC2_H__ */ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6323c50837..936d006ba4 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -119,15 +119,12 @@ static struct descriptor { #define ehci_is_TDI() (0) #endif -int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) +__weak int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) { return PORTSC_PSPD(reg); } -int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) - __attribute__((weak, alias("__ehci_get_port_speed"))); - -void __ehci_set_usbmode(int index) +__weak void ehci_set_usbmode(int index) { uint32_t tmp; uint32_t *reg_ptr; @@ -141,17 +138,11 @@ void __ehci_set_usbmode(int index) ehci_writel(reg_ptr, tmp); } -void ehci_set_usbmode(int index) - __attribute__((weak, alias("__ehci_set_usbmode"))); - -void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) +__weak void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) { mdelay(50); } -void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) - __attribute__((weak, alias("__ehci_powerup_fixup"))); - static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) { uint32_t result; @@ -1323,7 +1314,7 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) } /* Do not free buffers associated with QHs, they're owned by someone else */ -int +static int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) { struct ehci_ctrl *ctrl = dev->controller; diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index 52c43fdc5a..1a5fd6eefc 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -13,7 +13,7 @@ #include <asm/arch/cpu.h> #if defined(CONFIG_KIRKWOOD) -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #elif defined(CONFIG_ORION5X) #include <asm/arch/orion5x.h> #endif diff --git a/drivers/usb/host/xhci-keystone.c b/drivers/usb/host/xhci-keystone.c new file mode 100644 index 0000000000..05d338f261 --- /dev/null +++ b/drivers/usb/host/xhci-keystone.c @@ -0,0 +1,329 @@ +/* + * USB 3.0 DRD Controller + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <watchdog.h> +#include <usb.h> +#include <asm/arch/psc_defs.h> +#include <asm/io.h> +#include <linux/usb/dwc3.h> +#include <asm/arch/xhci-keystone.h> +#include <asm-generic/errno.h> +#include <linux/list.h> +#include "xhci.h" + +struct kdwc3_irq_regs { + u32 revision; /* 0x000 */ + u32 rsvd0[3]; + u32 sysconfig; /* 0x010 */ + u32 rsvd1[1]; + u32 irq_eoi; + u32 rsvd2[1]; + struct { + u32 raw_status; + u32 status; + u32 enable_set; + u32 enable_clr; + } irqs[16]; +}; + +struct keystone_xhci { + struct xhci_hccr *hcd; + struct dwc3 *dwc3_reg; + struct xhci_hcor *hcor; + struct kdwc3_irq_regs *usbss; + struct keystone_xhci_phy *phy; +}; + +struct keystone_xhci keystone; + +static void keystone_xhci_phy_set(struct keystone_xhci_phy *phy) +{ + u32 val; + + /* + * VBUSVLDEXTSEL has a default value of 1 in BootCfg but shouldn't. + * It should always be cleared because our USB PHY has an onchip VBUS + * analog comparator. + */ + val = readl(&phy->phy_clock); + /* quit selecting the vbusvldextsel by default! */ + val &= ~USB3_PHY_OTG_VBUSVLDECTSEL; + writel(val, &phy->phy_clock); +} + +static void keystone_xhci_phy_unset(struct keystone_xhci_phy *phy) +{ + u32 val; + + /* Disable the PHY REFCLK clock gate */ + val = readl(&phy->phy_clock); + val &= ~USB3_PHY_REF_SSP_EN; + writel(val, &phy->phy_clock); +} + +static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) +{ + clrsetbits_le32(&dwc3_reg->g_ctl, + DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG), + DWC3_GCTL_PRTCAPDIR(mode)); +} + +static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) +{ + /* Before Resetting PHY, put Core in Reset */ + setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); + + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST); + + /* After PHYs are stable we can take Core out of reset state */ + clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); +} + +static int dwc3_core_init(struct dwc3 *dwc3_reg) +{ + u32 revision, val; + unsigned long t_rst; + unsigned int dwc3_hwparams1; + + revision = readl(&dwc3_reg->g_snpsid); + /* This should read as U3 followed by revision number */ + if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) { + puts("this is not a DesignWare USB3 DRD Core\n"); + return -EINVAL; + } + + /* issue device SoftReset too */ + writel(DWC3_DCTL_CSFTRST, &dwc3_reg->d_ctl); + + t_rst = get_timer(0); + do { + val = readl(&dwc3_reg->d_ctl); + if (!(val & DWC3_DCTL_CSFTRST)) + break; + WATCHDOG_RESET(); + } while (get_timer(t_rst) < 500); + + if (val & DWC3_DCTL_CSFTRST) { + debug("Reset timed out\n"); + return -2; + } + + dwc3_core_soft_reset(dwc3_reg); + + dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1); + + val = readl(&dwc3_reg->g_ctl); + val &= ~DWC3_GCTL_SCALEDOWN_MASK; + val &= ~DWC3_GCTL_DISSCRAMBLE; + switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) { + case DWC3_GHWPARAMS1_EN_PWROPT_CLK: + val &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + default: + printf("No power optimization available\n"); + } + + /* + * WORKAROUND: DWC3 revisions <1.90a have a bug + * where the device can fail to connect at SuperSpeed + * and falls back to high-speed mode which causes + * the device to enter a Connect/Disconnect loop + */ + if ((revision & DWC3_REVISION_MASK) < 0x190a) + val |= DWC3_GCTL_U2RSTECN; + + writel(val, &dwc3_reg->g_ctl); + + return 0; +} + +static int keystone_xhci_core_init(struct dwc3 *dwc3_reg) +{ + int ret; + + ret = dwc3_core_init(dwc3_reg); + if (ret) { + debug("failed to initialize core\n"); + return -EINVAL; + } + + /* We are hard-coding DWC3 core to Host Mode */ + dwc3_set_mode(dwc3_reg, DWC3_GCTL_PRTCAP_HOST); + + return 0; +} + +int xhci_hcd_init(int index, + struct xhci_hccr **ret_hccr, struct xhci_hcor **ret_hcor) +{ + u32 val; + int ret; + struct xhci_hccr *hcd; + struct xhci_hcor *hcor; + struct kdwc3_irq_regs *usbss; + struct keystone_xhci_phy *phy; + + usbss = (struct kdwc3_irq_regs *)CONFIG_USB_SS_BASE; + phy = (struct keystone_xhci_phy *)CONFIG_DEV_USB_PHY_BASE; + + /* Enable the PHY REFCLK clock gate with phy_ref_ssp_en = 1 */ + val = readl(&(phy->phy_clock)); + val |= USB3_PHY_REF_SSP_EN; + writel(val, &phy->phy_clock); + + mdelay(100); + + /* Release USB from reset */ + ret = psc_enable_module(KS2_LPSC_USB); + if (ret) { + puts("Cannot enable USB module"); + return -1; + } + + mdelay(100); + + /* Initialize usb phy */ + keystone_xhci_phy_set(phy); + + /* soft reset usbss */ + writel(1, &usbss->sysconfig); + while (readl(&usbss->sysconfig) & 1) + ; + + val = readl(&usbss->revision); + debug("usbss revision %x\n", val); + + /* Initialize usb core */ + hcd = (struct xhci_hccr *)CONFIG_USB_HOST_XHCI_BASE; + keystone.dwc3_reg = (struct dwc3 *)(CONFIG_USB_HOST_XHCI_BASE + + DWC3_REG_OFFSET); + + keystone_xhci_core_init(keystone.dwc3_reg); + + /* set register addresses */ + hcor = (struct xhci_hcor *)((uint32_t)hcd + + HC_LENGTH(readl(&hcd->cr_capbase))); + + debug("Keystone2-xhci: init hccr %08x and hcor %08x hc_length %d\n", + (u32)hcd, (u32)hcor, + (u32)HC_LENGTH(xhci_readl(&hcd->cr_capbase))); + + keystone.usbss = usbss; + keystone.phy = phy; + keystone.hcd = hcd; + keystone.hcor = hcor; + + *ret_hccr = hcd; + *ret_hcor = hcor; + + return 0; +} + +static int keystone_xhci_phy_suspend(void) +{ + int loop_cnt = 0; + struct xhci_hcor *hcor; + uint32_t *portsc_1 = NULL; + uint32_t *portsc_2 = NULL; + u32 val, usb2_pls, usb3_pls, event_q; + struct dwc3 *dwc3_reg = keystone.dwc3_reg; + + /* set register addresses */ + hcor = keystone.hcor; + + /* Bypass Scrambling and Set Shorter Training sequence for simulation */ + val = DWC3_GCTL_PWRDNSCALE(0x4b0) | DWC3_GCTL_PRTCAPDIR(0x2); + writel(val, &dwc3_reg->g_ctl); + + /* GUSB2PHYCFG */ + val = readl(&dwc3_reg->g_usb2phycfg[0]); + + /* assert bit 6 (SusPhy) */ + val |= DWC3_GUSB2PHYCFG_SUSPHY; + writel(val, &dwc3_reg->g_usb2phycfg[0]); + + /* GUSB3PIPECTL */ + val = readl(&dwc3_reg->g_usb3pipectl[0]); + + /* + * assert bit 29 to allow PHY to go to suspend when idle + * and cause the USB3 SS PHY to enter suspend mode + */ + val |= (BIT(29) | DWC3_GUSB3PIPECTL_SUSPHY); + writel(val, &dwc3_reg->g_usb3pipectl[0]); + + /* + * Steps necessary to allow controller to suspend even when + * VBUS is HIGH: + * - Init DCFG[2:0] (DevSpd) to: 1=FS + * - Init GEVNTADR0 to point to an eventQ + * - Init GEVNTSIZ0 to 0x0100 to specify the size of the eventQ + * - Init DCTL::Run_nStop = 1 + */ + writel(0x00020001, &dwc3_reg->d_cfg); + /* TODO: local2global( (Uint32) eventQ )? */ + writel((u32)&event_q, &dwc3_reg->g_evnt_buf[0].g_evntadrlo); + writel(0, &dwc3_reg->g_evnt_buf[0].g_evntadrhi); + writel(0x4, &dwc3_reg->g_evnt_buf[0].g_evntsiz); + /* Run */ + writel(DWC3_DCTL_RUN_STOP, &dwc3_reg->d_ctl); + + mdelay(100); + + /* Wait for USB2 & USB3 PORTSC::PortLinkState to indicate suspend */ + portsc_1 = (uint32_t *)(&hcor->portregs[0].or_portsc); + portsc_2 = (uint32_t *)(&hcor->portregs[1].or_portsc); + usb2_pls = 0; + usb3_pls = 0; + do { + ++loop_cnt; + usb2_pls = (readl(portsc_1) & PORT_PLS_MASK) >> 5; + usb3_pls = (readl(portsc_2) & PORT_PLS_MASK) >> 5; + } while (((usb2_pls != 0x4) || (usb3_pls != 0x4)) && loop_cnt < 1000); + + if (usb2_pls != 0x4 || usb3_pls != 0x4) { + debug("USB suspend failed - PLS USB2=%02x, USB3=%02x\n", + usb2_pls, usb3_pls); + return -1; + } + + debug("USB2 and USB3 PLS - Disabled, loop_cnt=%d\n", loop_cnt); + return 0; +} + +void xhci_hcd_stop(int index) +{ + /* Disable USB */ + if (keystone_xhci_phy_suspend()) + return; + + if (psc_disable_module(KS2_LPSC_USB)) { + debug("PSC disable module USB failed!\n"); + return; + } + + /* Disable PHY */ + keystone_xhci_phy_unset(keystone.phy); + +/* memset(&keystone, 0, sizeof(struct keystone_xhci)); */ + debug("xhci_hcd_stop OK.\n"); +} diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9231927879..6aa50cb4f9 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -944,7 +944,7 @@ static void parse_putc(const char c) CURSOR_SET; } -void video_putc(struct stdio_dev *dev, const char c) +static void video_putc(struct stdio_dev *dev, const char c) { #ifdef CONFIG_CFB_CONSOLE_ANSI int i; @@ -1158,7 +1158,7 @@ void video_putc(struct stdio_dev *dev, const char c) flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE); } -void video_puts(struct stdio_dev *dev, const char *s) +static void video_puts(struct stdio_dev *dev, const char *s) { int count = strlen(s); @@ -1171,14 +1171,11 @@ void video_puts(struct stdio_dev *dev, const char *s) * video_set_lut() if they do not support 8 bpp format. * Implement weak default function instead. */ -void __video_set_lut(unsigned int index, unsigned char r, +__weak void video_set_lut(unsigned int index, unsigned char r, unsigned char g, unsigned char b) { } -void video_set_lut(unsigned int, unsigned char, unsigned char, unsigned char) - __attribute__ ((weak, alias("__video_set_lut"))); - #if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) #define FILL_8BIT_332RGB(r,g,b) { \ @@ -2240,15 +2237,12 @@ static int video_init(void) * Implement a weak default function for boards that optionally * need to skip the video initialization. */ -int __board_video_skip(void) +__weak int board_video_skip(void) { /* As default, don't skip test */ return 0; } -int board_video_skip(void) - __attribute__ ((weak, alias("__board_video_skip"))); - int drv_video_init(void) { int skip_dev_init; diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index 180a3b4149..be35b982ac 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -58,54 +58,38 @@ static void exynos_lcd_init(vidinfo_t *vid) lcd_set_flush_dcache(1); } -void __exynos_cfg_lcd_gpio(void) +__weak void exynos_cfg_lcd_gpio(void) { } -void exynos_cfg_lcd_gpio(void) - __attribute__((weak, alias("__exynos_cfg_lcd_gpio"))); -void __exynos_backlight_on(unsigned int onoff) +__weak void exynos_backlight_on(unsigned int onoff) { } -void exynos_backlight_on(unsigned int onoff) - __attribute__((weak, alias("__exynos_cfg_lcd_gpio"))); -void __exynos_reset_lcd(void) +__weak void exynos_reset_lcd(void) { } -void exynos_reset_lcd(void) - __attribute__((weak, alias("__exynos_reset_lcd"))); -void __exynos_lcd_power_on(void) +__weak void exynos_lcd_power_on(void) { } -void exynos_lcd_power_on(void) - __attribute__((weak, alias("__exynos_lcd_power_on"))); -void __exynos_cfg_ldo(void) +__weak void exynos_cfg_ldo(void) { } -void exynos_cfg_ldo(void) - __attribute__((weak, alias("__exynos_cfg_ldo"))); -void __exynos_enable_ldo(unsigned int onoff) +__weak void exynos_enable_ldo(unsigned int onoff) { } -void exynos_enable_ldo(unsigned int onoff) - __attribute__((weak, alias("__exynos_enable_ldo"))); -void __exynos_backlight_reset(void) +__weak void exynos_backlight_reset(void) { } -void exynos_backlight_reset(void) - __attribute__((weak, alias("__exynos_backlight_reset"))); -int __exynos_lcd_misc_init(vidinfo_t *vid) +__weak int exynos_lcd_misc_init(vidinfo_t *vid) { return 0; } -int exynos_lcd_misc_init(vidinfo_t *vid) - __attribute__((weak, alias("__exynos_lcd_misc_init"))); static void lcd_panel_on(vidinfo_t *vid) { diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c index 8d4e925478..5873531953 100644 --- a/drivers/video/ipu_common.c +++ b/drivers/video/ipu_common.c @@ -379,7 +379,7 @@ static struct clk pixel_clk[] = { /* * This function resets IPU */ -void ipu_reset(void) +static void ipu_reset(void) { u32 *reg; u32 value; diff --git a/drivers/video/ipu_disp.c b/drivers/video/ipu_disp.c index 948e1fc401..4faeafb635 100644 --- a/drivers/video/ipu_disp.c +++ b/drivers/video/ipu_disp.c @@ -377,7 +377,7 @@ static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = { static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE; static int color_key_4rgb = 1; -void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param, +static void ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param, unsigned char srm_mode_update) { u32 reg; @@ -605,17 +605,6 @@ void ipu_dc_uninit(int dc_chan) } } -int ipu_chan_is_interlaced(ipu_channel_t channel) -{ - if (channel == MEM_DC_SYNC) - return !!(__raw_readl(DC_WR_CH_CONF_1) & - DC_WR_CH_CONF_FIELD_MODE); - else if ((channel == MEM_BG_SYNC) || (channel == MEM_FG_SYNC)) - return !!(__raw_readl(DC_WR_CH_CONF_5) & - DC_WR_CH_CONF_FIELD_MODE); - return 0; -} - void ipu_dp_dc_enable(ipu_channel_t channel) { int di; @@ -782,7 +771,7 @@ void ipu_init_dc_mappings(void) ipu_dc_map_config(4, 2, 21, 0xFC); } -int ipu_pixfmt_to_map(uint32_t fmt) +static int ipu_pixfmt_to_map(uint32_t fmt) { switch (fmt) { case IPU_PIX_FMT_GENERIC: @@ -802,28 +791,6 @@ int ipu_pixfmt_to_map(uint32_t fmt) } /* - * This function is called to adapt synchronous LCD panel to IPU restriction. - */ -void adapt_panel_to_ipu_restricitions(uint32_t *pixel_clk, - uint16_t width, uint16_t height, - uint16_t h_start_width, - uint16_t h_end_width, - uint16_t v_start_width, - uint16_t *v_end_width) -{ - if (*v_end_width < 2) { - uint16_t total_width = width + h_start_width + h_end_width; - uint16_t total_height_old = height + v_start_width + - (*v_end_width); - uint16_t total_height_new = height + v_start_width + 2; - *v_end_width = 2; - *pixel_clk = (*pixel_clk) * total_width * total_height_new / - (total_width * total_height_old); - printf("WARNING: adapt panel end blank lines\n"); - } -} - -/* * This function is called to initialize a synchronous LCD panel. * * @param disp The DI the panel is attached to. @@ -880,14 +847,17 @@ int32_t ipu_init_sync_panel(int disp, uint32_t pixel_clk, if ((v_sync_width == 0) || (h_sync_width == 0)) return -EINVAL; - adapt_panel_to_ipu_restricitions(&pixel_clk, width, height, - h_start_width, h_end_width, - v_start_width, &v_end_width); + /* adapt panel to ipu restricitions */ + if (v_end_width < 2) { + v_end_width = 2; + puts("WARNING: v_end_width (lower_margin) must be >= 2, adjusted\n"); + } + h_total = width + h_sync_width + h_start_width + h_end_width; v_total = height + v_sync_width + v_start_width + v_end_width; /* Init clocking */ - debug("pixel clk = %d\n", pixel_clk); + debug("pixel clk = %dHz\n", pixel_clk); if (sig.ext_clk) { if (!(g_di1_tvout && (disp == 1))) { /*not round div for tvout*/ diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index f75d77064e..1fa95314fc 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -36,7 +36,7 @@ static struct fb_videomode const *gmode; static uint8_t gdisp; static uint32_t gpixfmt; -void fb_videomode_to_var(struct fb_var_screeninfo *var, +static void fb_videomode_to_var(struct fb_var_screeninfo *var, const struct fb_videomode *mode) { var->xres = mode->xres; @@ -258,8 +258,7 @@ static int mxcfb_set_par(struct fb_info *fbi) if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) sig_cfg.clkidle_en = 1; - debug("pixclock = %ul Hz\n", - (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + debug("pixclock = %lu Hz\n", PICOS2KHZ(fbi->var.pixclock) * 1000UL); if (ipu_init_sync_panel(mxc_fbi->ipu_di, (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, @@ -486,7 +485,7 @@ static struct fb_info *mxcfb_init_fbinfo(void) /* * Probe routine for the framebuffer driver. It is called during the - * driver binding process. The following functions are performed in + * driver binding process. The following functions are performed in * this routine: Framebuffer initialization, Memory allocation and * mapping, Framebuffer registration, IPU initialization. * @@ -542,7 +541,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp, mxcfb_set_fix(fbi); - /* alocate fb first */ + /* allocate fb first */ if (mxcfb_map_video_memory(fbi) < 0) return -ENOMEM; |
